dsp_debug_setup_usart1_at32uc.c File Reference

Detailed Description

Debugging module for the DSP library. This file is used to make an abstraction of the driver used to control the debugging periferal.

Author:: Atmel Corporation: http://www.atmel.com
Support and FAQ: http://support.atmel.no/

#include "usart.h"
#include "gpio.h"
#include "board.h"
#include "dsp.h"
#include "dsp_debug.h"

Go to the source code of this file.

Defines

USART Settings

#define EXAMPLE_USART   (&AVR32_USART1)

#define EXAMPLE_USART_BAUDRATE   57600

#define EXAMPLE_USART_BITSPERCHAR   8

#define EXAMPLE_USART_IRQ   AVR32_USART1_IRQ

#define EXAMPLE_USART_PARITY   USART_NO_PARITY

#define EXAMPLE_USART_RX_FUNCTION   AVR32_USART1_RXD_0_0_FUNCTION

#define EXAMPLE_USART_RX_PIN   AVR32_USART1_RXD_0_0_PIN

#define EXAMPLE_USART_STOPBIT   USART_1_STOPBIT

#define EXAMPLE_USART_TX_FUNCTION   AVR32_USART1_TXD_0_0_FUNCTION

#define EXAMPLE_USART_TX_PIN   AVR32_USART1_TXD_0_0_PIN

Functions

void dsp_debug_init (int fosc)

this function intializes the USART module at "EXAMPLE_USART_BAUDRATE" bauds

char dsp_debug_read_fct ()

This function is used to get a string through the USART.

void dsp_debug_write_fct (char c)

This function is used by the debugging module. It permits to print a character through the USART.

#define EXAMPLE_USART (&AVR32_USART1)

#define EXAMPLE_USART_BAUDRATE 57600

#define EXAMPLE_USART_BITSPERCHAR 8

#define EXAMPLE_USART_IRQ AVR32_USART1_IRQ

#define EXAMPLE_USART_PARITY USART_NO_PARITY

#define EXAMPLE_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION

#define EXAMPLE_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN

#define EXAMPLE_USART_STOPBIT USART_1_STOPBIT

#define EXAMPLE_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION

#define EXAMPLE_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN


Defines
USART Settings
#define	EXAMPLE_USART (&AVR32_USART1)
#define	EXAMPLE_USART_BAUDRATE 57600
#define	EXAMPLE_USART_BITSPERCHAR 8
#define	EXAMPLE_USART_IRQ AVR32_USART1_IRQ
#define	EXAMPLE_USART_PARITY USART_NO_PARITY
#define	EXAMPLE_USART_RX_FUNCTION AVR32_USART1_RXD_0_0_FUNCTION
#define	EXAMPLE_USART_RX_PIN AVR32_USART1_RXD_0_0_PIN
#define	EXAMPLE_USART_STOPBIT USART_1_STOPBIT
#define	EXAMPLE_USART_TX_FUNCTION AVR32_USART1_TXD_0_0_FUNCTION
#define	EXAMPLE_USART_TX_PIN AVR32_USART1_TXD_0_0_PIN
Functions
void	dsp_debug_init (int fosc)
	this function intializes the USART module at "EXAMPLE_USART_BAUDRATE" bauds
char	dsp_debug_read_fct ()
	This function is used to get a string through the USART.
void	dsp_debug_write_fct (char c)
	This function is used by the debugging module. It permits to print a character through the USART.