Readme - APPLICATIONS\EVK11xx_UC3B_VIRTUAL_COM_PORT\AT32UC3B1256\GCC

This directory contains script to program the AT32UC3B1256 part on the AVR32 evaluation kits with the USB CDC firmware,
using the AT32UC3B1256 USB DFU bootloader.

To properly operate, the above fix requires that the Atmel FLIP tool is installed on your system. 
If not and prior to any operation please: 
* Download the FLIP tool from http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3886 and install it.
* Connect  the USB VCP connector to your computer.
* In the new USB device wizard (opened in case the DFU bootloader is launched), browse to the FLIP USB folder (default C:\Program Files\Atmel\Flip 3.x.x\usb) to install the DFU driver. 

To program the AT32UC3B1256 USB CDC firmware:
* Connect the USB VCP connector (USB right  connector) to your computer until you see the UC3B DFU device in the Device Manager
* Open a MSDOS or shell console
* Execute the script: "dfuprogram_x" 

The following scripts are supported:
* dfuprogram_evk1104.cmd, .sh
* dfuprogram_evk1105.cmd, .sh
* dfuprogram_uc3c_ek.cmd, .sh
* dfuprogram_uc3l_ek.cmd, .sh
