[4.13.8]
* Small patch build
* Fixed some incorrect Tool Head names that caused a mismatch between what the firmware reported and what Cura LE expected during a USB connection
* Added a missing M420 S1 command to SideKick start gcode

[4.13.7]
* Added some Standard profiles for 0.3, 0.4, and 0.8mm nozzles on the Meteor Tool Heads
* Started work on a potential new setting category
* Fixed a bug where duplicating profiles crashed the application
* Fixed an issue with the Workhorse looking for the wrong name in Firmware
* Fixed an issue with Mini 1s potentially being created with and LCD when they aren't supposed to have one
* Corrected some flawed logic in the checkFirmware stage of USB connections that may have overwhelmed some printers

[4.13.6]
* Primarily a firmware update
* Updated firmware on all TAZ Pro printers to 2.1.3.0.23
* Updated firmware on all current-model GLCD printers to 2.1.3.0.24
* Slight changes to first layer speeds on Galaxy extruders
* Patched a bug dealing with wrong values being used in Bio profiles

[4.13.5]
* Added in Twin Nebula Tool Heads for the TAZ Pro XT
* Added profiles for BASF Ultrafuse TPU on MET285 Tool Heads
* Added the developmental "TAZ Pro XT Long Bed" configuration for experimental use.
* Added High Speed and Detailed quality profiles for some materials on the MET285
* Removed Linear Advance K factor command from all pre-galaxy start gcodes, only galaxies have them now.
* Added a couple more status messages into start gcodes
* Started the addition of a "Material Printing Tips" entry on the settings dropdown.
* Started modifying the Firmware Update and Monitor pages for use (or lack thereof) with Klipper-run printers.
* Updated firmware to 2.1.3.0.21 on all non-Legacy printer configurations
* Updated firmware to 2.1.3.0.22 on all Pro printers and Workhorse Galaxy printers
* Mini 3 and Core XY gcode files now have the thumbnails required by Mainsail generated by default automatically
* Mini 3 End Gcode updated
* Firmware version that Automatic Firmware Update is now always displayed
* Updated some of the printer names in the "Add Printer" menu
* Fixed a small bug in the "Pause At Height or Layer" script in the PostProcessingPlugin
* Custom profile visibility is now limited to which material it was made with.
* Fixed TAZ 6 with the Aerostruder Tool Head receiving the wrong firmware on an automatic update
* Added a dropdown on the recommended tab that allows you to create parts with textured walls to better hide z seams
* Added a checkbox on the recommended tab that will	enable vase mode
* Removed Linear Advance K factor command from all pre-galaxy start gcodes, only galaxies have them now.
* Added a couple more status messages into start gcodes
* Tethered printing now communicates print completion percentages to your printer to display on the LCD
* Fixed TAZ 6 with the Aerostruder Tool Head receiving the wrong firmware on an automatic update
* Slight changes and fixes to the rotate tool
* Patched a small bug related to the progress message when performing a "Lay Flat" operation that takes too long


[4.13.4]
* New Pro Firmware (2.1.3.0.20)
* You can now toggle whether you'd like a removable drive to automatically eject after you save a gcode file to it.
* Increased Mini 3 default acceleration across the board
* Changed MET Tool Heads to have 17.5% support density

[4.13.3]
* Added a button to drop a model to the build plate on the scale tool menu.
* Added hotkeys for the "`", "1", "2", "3", and "4" keys that toggle between Prepare and Preview, open the Open File dialog, slice, save gcode, and both clear bed/open file for each key respectively
* Made red notification icon on the Filament Change Tool more prominent and harder to miss
* Changed TAZ Pro Dual start gcode to use a G12 command instead of manually done wiping
* Patched up some of the firmware Tool Head names that have been coming up wrong. Made a mismatch not be a connection-dropping error.
* Switched default combing mode to "Within Infill" for realsies
* Happy Holidays!

[4.13.2]
* Added High Speed profiles for MET285 PLA materials
* Updated TAZ Pro series printers firmware to 2.1.3.0.19
* Updated default travel speed on Pro Long Bed printers to 125mm/s
* Changed Horizontal Expansion value from -0.113 back to 0
* Switched default combing mode back to "Within Infill"
* Mini 1 and TAZ Pro Long Bed should now be able to connect via USB without having the "Connect to Wrong Printers" setting checked.
* Fixed some glitchy behavior with the rotate and scale tools de-selecting back to the translate tool whenever you would attempt to use the handles

[4.13.1]
* Monitor tab now includes buttons for extruding and retracting filament
* Updated TAZ Pro series printers firmware to 2.1.3.0.18
* Expanded the default build area of TAZ Pro and TAZ Pro XT printers to 285mm x 285mm.
* Opening the "Open File(s)" dialog now reverts Cura LE back to the Prepare screen
* Minor change to end gcode files stops printers from disabling the Y motor at the conclusion of a print, which makes it slightly easier to remove a part from the bed

[4.13.0-release]
* We figure it's about time.
* Added some more support for a 2.4mm nozzle on the AST285
* Added select settings to the start gcode for all printers that should make for easier debugging
* Moved the Filament Change script out of PostProcessing and into its own Tool Button. This should make it easier for casual users to find!
* Made slight corrections to most of our current Galaxy Tool Head profiles to improve overall print quality
* Updated all TAZ Pro model printers' firmware up to 2.1.3.0.17
* Moved Cura LulzBot Edition out of Beta

[4.13.0-Beta v2.13]
* Another small update!
* Firmware for TAZ Pro and derivative printers bumped up to 2.1.3.0.15
* Disabled jerk control on Mini 3
* Added 2.4mm variant to the Asteroid Tool Heads

[4.13.0-Beta v2.12]
* Small update!
* Couple more small changes to the Recommended tab! Go figure, huh!
* Touched on issues noted from a couple of anonymous crash reports; Yes, I do get those, thank you!
* Updated TAZ Pro and derivatives firmware to 2.1.3.0.13
* Modified the horizontal expansion value slightly for the METEOR Tool Heads

[4.13.0-Beta v2.11]
* Added a button on the bottom right that allows you to clear the build plate and open a new file with a single click
* Pro and Pro XT have an updated bed STL, along with the Mini 3 getting an official one
* Open File button is now persistent between Prepare and Preview
* Squashed down the Slice/Output widget a bit for spacial concerns
* Cleaned up the "Add Printer" menu a little
* Patched up the visibility of some qualities for TAZ 5, 6, and Mini 1
* Revisited the Firmware Updater, it should consistently provide the correct firmware files now
* USB Connections will now properly time-out after several seconds without any response from the 3D Printer
* Switching printers while there is an active USB connection is now prevented to avoid accidentally cancelling prints

[4.13.0-Beta v2.10]
* More tweaks to the Recommended tab
* Small USB printing bugfixes, more on the way
* New Logo for the application header
* Tweaks to the job info widget
* New preferences regarding job name generation!
* Many more small setting tweaks under the hood

[4.13.0-Beta v2.9.1]
* Quick patch update
* Fixed issue causing CuraLE to not be able to locate firmware files for update on some printer configurations
* Quick update to Firmware for TAZ Pro series printers
* Updated temperatures for Wipe and Soften slightly across the board for better start performance
* Looking into bugs regarding the drop-down boxes on the recommended settings tab

[4.13.0-Beta v2.9]
* Finished revamping the recommended tab, everything should be added back in as intended
* Plugged in media now takes priority after slicing, so USB drives and SD cards should now be automatically selected when saving (You can still save to drive!)
* Version Marlin 2.1 Firmware for the TAZ Pro series printers! You may encounter some quirks but we're pretty excited about how this is coming along!
* Colors of different materials of the same material type (PLA, ABS, etc.) now match for simplicity
* Made settings for Probe, Wipe, Soften, and Standby temperatures along with Skirt settings much more consistent across profiles
* Many many small changes related to overall code safety and stability. Should result in much cleaner log files (yay for me)!

[4.13.0-Beta v2.8]
* Did some work on the recommended tab, Some items were temporarily removed to be reworked for better overall functionality
* Patched Firmware for Mini 2, SideKicks, and Workhorse to fix an issue where the Tool Head selection screen came up blank
* CuraLE now transitions straight to the Preview screen after slicing (only when "Automatically Slice" is turned off)
* CuraLE now asks you if you'd like to discard changes when switching between profiles while the recommended tab is open
* Added "Ensure Models Are Kept Apart" toggle into the Custom Supports tool for ease of access
* Changed the default material when opening CuraLE to be PolyLite PLA
* Cleaned up some of our profiles and printer definitions
* Added the Twin Nebula Tool Heads as an option for the TAZ Pro

[4.13.0-Beta v2.7]
* Fixed MacOS bug that prevented USB connections with M1 and M2 chips
* Made major changes to the recommended print settings tab to make things a little easier to understand for less experienced users
* Continued expanding material profiles for our newer model Tool Heads

[4.13.0-Beta v2.6]
* Build primarily to revert TAZ Pro firmware back to an older version
* Newer TAZ Pro firmware with stability improvements is in the works
* More profile additions and corrections for the Galaxy Series Tool Heads

[4.13.0-Beta v2.5]
* Added Linear Advance setting (Does not currently affect prints, but will be added via start gcode)
* Expanded profile options for AST285 and MET285 slightly
* Quite a few more profiles are in the works, so more will come soon
* Added button on Monitor page that will allow you to start a tethered print from there rather than on the Prepare page
* Made changes to the recommended print settings tab to make it simpler

[4.13.0-Beta v2.4]
* Language on the Update Firmware page has been updated for clarity.
* Updated firmware on the Mini 2, SideKicks 289/747, and TAZ Workhorse.
* Reviewed and updated Galaxy Series quality profiles to be more accurate
* Added PLA profiles for the AST285 Tool Head.
* More profiles will be added for the Galaxy Tool Heads in the coming updates.

[4.13.0-Beta v2.3]
* Fixed background color of add printer screen on MacOS Dark model
* Fixed profiles not appearing for TAZ 5 and 6 single extruders
* Minor spelling corrections
* Expanding profile options for MET285
* Consolidating Material Families
* Model that loads onto build plate of first start-up will now load any time a new printer is added.
* The add printer model is now different for the TAZ Pro Dual and TAZ Workhorse with SE Tool Head.
* Adjusted location of Multiply button in the tool bar.
* !! First launch stl files will still occasionally load off of the build plate. This issue is turning out to be relatively hard to pin down.

[4.13.0-Beta v2.2]
* Fixed a couple of missing gcode files for certain printers
* Added ability to select Bio, TAZ 5, and Mini 1 printers (Limited to Legacy Universal Tool Heads on TAZ 5 and Mini 1 for now)
* Added a "Multiply" button on the tool bar instead of needing to right click
* Ensured "Scale To Max" results in a part above the build plate
* Fixed monitor page not being able to scroll correctly
* Expanded "Add Printer" dialog slightly by default and added the ability to increase the size of the window, it had been locked to size before
* Fixed bug where the rocktopus.stl file would load off the buildplate

[4.13.0-Beta v2.1]
* Improved job name setting options
* Temp fix for ugly warning regarding incompatable qualities
* Cleaned up add printer screen

[4.13.0-Beta v2.0.1]
* Fixed issue that made SideKick 289 unable to Slice
* Made TAZ 6 with Universal Tool Heads visible
* TAZ 5, Mini 1, and older Legacy TAZ 6 Tool Heads will come soon, never fear!

[4.13.0-Beta v2]
* Refactored printer definitions and settings to improve workflow
* Added Generic profiles for some material types
* Added Update Firmware button to Monitor screen
* Removed LulzBot Dark theme until it can be redone
* Added a new setting that allows flexibility in auto generated job names
* Some small bug fixes

[4.13.0-Beta v1.10]
* Added material profiles for MET175 and MET285
* Improved Galaxy Firmware slightly
* Working on refactoring quality system

[4.13.0-Beta v1.8.1]
* Added basic material profiles for Galaxy Tool Heads
* Resized first start and add machine menus to better fit content.

[4.13.0-Beta v1.7]
* Small bugfix patch
* Mainly just fixed an issue with flashing Pro firmware on Windows

[4.13.0-Beta v1.6]
* Fixed small but in monitor screen regarding the print bed
* Reworked material selection to go by material type and then brand
* Added the ability to mark a machine as having an optional BLTouch
* Added the Asteroid and Meteor Experimental Tool Heads
* Added firmware for the aformentioned Tool Heads

[4.13.0-Beta v1.5]
* Reworked printer connections
* Improved consistency of firmware updating
* Fixed automatic firmware updating (hopefully!)
* Please note: OctoPrint plugin may be a bit buggy with these changes
* Updated monitor page to look more similar to 3.6, will continue to be improved
* Re-added the ability to change filament diameter in custom settings
* Fixed an issue where Cura LE would crash when scrolling in the preferences menu
* Fixed an issue that caused PolyFlex to not be usable
* Adjusted default visible settings to include a couple more useful settings

[4.13.0-Beta v1.4]
* Reimplemented the OctoPrint plugin
* Reimplemented a Custom Supports plugin
* Added ability to input accurate values in rotation tool
* Added "Scale to Max" button, though functionality needs work
* Fixed some firmware file locations and added a couple missing files
* Corrected issue that caused missing temperature values in Dual Extruder gcode files
* Corrected naming issue with PolyFlex 1.75mm filament
* Adjusted the About dialog to use more relevant links
* Removed outdated M425 commands from remaining gcode files
* Updated included firmware file for TAZ Pro Long Bed to 2.0.0.144.10

[4.13.0-Beta v1.3]
* "Ensure models are kept apart" setting is now checked by default
* "No Material" is now listed under "Dual Extrusion" as a brand name for the time being
* "Console" button on the Monitor screen is now enabled during a print
* Cura LE will once again react to LCD printer pauses, resumes, and stops
* Cura LE will now recognize a printer error has occured during a print and will drop the connection

[4.13.0-Beta v1.2]
* Fixed missing start and end gcode scripts on some configurations
* Fixed issue that caused application to crash upon creating a Mini 1 machine
* Fixed issue that caused a crash when creating a Workhorse with HS+ Tool Head
* Fixed broken quality profiles for NinjaFlex Edge on M175v2 Tool Heads

[4.13.0-Beta v1.1]
* Updated default settings to the "Advanced" preset instead of "Basic"

[4.13.0-Beta v1.0]
* Updated to be more in-line with upstream Cura as of Ultimaker Cura 4.13
* A more in-depth patch-notes will be created as we approach a full launch
