#include <stdlib.h>
#include <unistd.h>
#include "SDL.h"
#include <stdio.h>

Include dependency graph for testfile.c:

Macros
#define	_CRT_NONSTDC_NO_WARNINGS
#define	FBASENAME1 "sdldata1" /* this file will be created during tests */
#define	FBASENAME2 "sdldata2" /* this file should not exist before starting test */
#define	NULL ((void *)0)
#define	RWOP_ERR_QUIT(x) rwops_error_quit( __LINE__, (x) )

Functions
static void	cleanup (void)
static void	rwops_error_quit (unsigned line, SDL_RWops *rwops)
int	main (int argc, char *argv[])

Macro Definition Documentation

#define _CRT_NONSTDC_NO_WARNINGS

Definition at line 16 of file testfile.c.

#define FBASENAME1 "sdldata1" /* this file will be created during tests */

Definition at line 35 of file testfile.c.

Referenced by cleanup(), and main().

#define FBASENAME2 "sdldata2" /* this file should not exist before starting test */

Definition at line 36 of file testfile.c.

Referenced by cleanup(), and main().

#define NULL ((void *)0)

Definition at line 40 of file testfile.c.

Referenced by main().

#define RWOP_ERR_QUIT ( x ) rwops_error_quit( __LINE__, (x) )

Definition at line 61 of file testfile.c.

Referenced by main().

Function Documentation

static void cleanup ( void )

static

Definition at line 44 of file testfile.c.

References FBASENAME1, and FBASENAME2.

Referenced by main(), rwops_error_quit(), and video_getSetWindowData().

{
    unlink(FBASENAME1);
    unlink(FBASENAME2);
}

int main	(	int	argc,
		char *	argv[]
	)

Definition at line 66 of file testfile.c.

References cleanup(), SDL_RWops::close, FBASENAME1, FBASENAME2, NULL, SDL_RWops::read, RW_SEEK_CUR, RW_SEEK_END, RW_SEEK_SET, RWOP_ERR_QUIT, SDL_Log, SDL_LOG_CATEGORY_APPLICATION, SDL_LOG_PRIORITY_INFO, SDL_LogSetPriority, SDL_memcmp, SDL_RWFromFile, SDL_RWops::seek, and SDL_RWops::write.

{
    SDL_RWops *rwops = NULL;
    char test_buf[30];
    /* Enable standard application logging */
    SDL_LogSetPriority(SDL_LOG_CATEGORY_APPLICATION, SDL_LOG_PRIORITY_INFO);
    cleanup();
/* test 1 : basic argument test: all those calls to SDL_RWFromFile should fail */
    rwops = SDL_RWFromFile(NULL, NULL);
    if (rwops)
        RWOP_ERR_QUIT(rwops);
    rwops = SDL_RWFromFile(NULL, "ab+");
    if (rwops)
        RWOP_ERR_QUIT(rwops);
    rwops = SDL_RWFromFile(NULL, "sldfkjsldkfj");
    if (rwops)
        RWOP_ERR_QUIT(rwops);
    rwops = SDL_RWFromFile("something", "");
    if (rwops)
        RWOP_ERR_QUIT(rwops);
    rwops = SDL_RWFromFile("something", NULL);
    if (rwops)
        RWOP_ERR_QUIT(rwops);
    SDL_Log("test1 OK\n");
/* test 2 : check that inexistent file is not successfully opened/created when required */
/* modes : r, r+ imply that file MUST exist
   modes : a, a+, w, w+ checks that it succeeds (file may not exists)
 */
    rwops = SDL_RWFromFile(FBASENAME2, "rb");   /* this file doesn't exist that call must fail */
    if (rwops)
        RWOP_ERR_QUIT(rwops);
    rwops = SDL_RWFromFile(FBASENAME2, "rb+");  /* this file doesn't exist that call must fail */
    if (rwops)
        RWOP_ERR_QUIT(rwops);
    rwops = SDL_RWFromFile(FBASENAME2, "wb");
    if (!rwops)
        RWOP_ERR_QUIT(rwops);
    rwops->close(rwops);
    unlink(FBASENAME2);
    rwops = SDL_RWFromFile(FBASENAME2, "wb+");
    if (!rwops)
        RWOP_ERR_QUIT(rwops);
    rwops->close(rwops);
    unlink(FBASENAME2);
    rwops = SDL_RWFromFile(FBASENAME2, "ab");
    if (!rwops)
        RWOP_ERR_QUIT(rwops);
    rwops->close(rwops);
    unlink(FBASENAME2);
    rwops = SDL_RWFromFile(FBASENAME2, "ab+");
    if (!rwops)
        RWOP_ERR_QUIT(rwops);
    rwops->close(rwops);
    unlink(FBASENAME2);
    SDL_Log("test2 OK\n");
/* test 3 : creation, writing , reading, seeking,
            test : w mode, r mode, w+ mode
 */
    rwops = SDL_RWFromFile(FBASENAME1, "wb");   /* write only */
    if (!rwops)
        RWOP_ERR_QUIT(rwops);
    if (1 != rwops->write(rwops, "1234567890", 10, 1))
        RWOP_ERR_QUIT(rwops);
    if (10 != rwops->write(rwops, "1234567890", 1, 10))
        RWOP_ERR_QUIT(rwops);
    if (7 != rwops->write(rwops, "1234567", 1, 7))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->read(rwops, test_buf, 1, 1))
        RWOP_ERR_QUIT(rwops);   /* we are in write only mode */
    rwops->close(rwops);
    rwops = SDL_RWFromFile(FBASENAME1, "rb");   /* read mode, file must exists */
    if (!rwops)
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET))
        RWOP_ERR_QUIT(rwops);
    if (20 != rwops->seek(rwops, -7, RW_SEEK_END))
        RWOP_ERR_QUIT(rwops);
    if (7 != rwops->read(rwops, test_buf, 1, 7))
        RWOP_ERR_QUIT(rwops);
    if (SDL_memcmp(test_buf, "1234567", 7))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->read(rwops, test_buf, 1, 1))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->read(rwops, test_buf, 10, 100))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->seek(rwops, -27, RW_SEEK_CUR))
        RWOP_ERR_QUIT(rwops);
    if (2 != rwops->read(rwops, test_buf, 10, 3))
        RWOP_ERR_QUIT(rwops);
    if (SDL_memcmp(test_buf, "12345678901234567890", 20))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->write(rwops, test_buf, 1, 1))
        RWOP_ERR_QUIT(rwops);   /* readonly mode */
    rwops->close(rwops);
/* test 3: same with w+ mode */
    rwops = SDL_RWFromFile(FBASENAME1, "wb+");  /* write + read + truncation */
    if (!rwops)
        RWOP_ERR_QUIT(rwops);
    if (1 != rwops->write(rwops, "1234567890", 10, 1))
        RWOP_ERR_QUIT(rwops);
    if (10 != rwops->write(rwops, "1234567890", 1, 10))
        RWOP_ERR_QUIT(rwops);
    if (7 != rwops->write(rwops, "1234567", 1, 7))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET))
        RWOP_ERR_QUIT(rwops);
    if (1 != rwops->read(rwops, test_buf, 1, 1))
        RWOP_ERR_QUIT(rwops);   /* we are in read/write mode */
    if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET))
        RWOP_ERR_QUIT(rwops);
    if (20 != rwops->seek(rwops, -7, RW_SEEK_END))
        RWOP_ERR_QUIT(rwops);
    if (7 != rwops->read(rwops, test_buf, 1, 7))
        RWOP_ERR_QUIT(rwops);
    if (SDL_memcmp(test_buf, "1234567", 7))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->read(rwops, test_buf, 1, 1))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->read(rwops, test_buf, 10, 100))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->seek(rwops, -27, RW_SEEK_CUR))
        RWOP_ERR_QUIT(rwops);
    if (2 != rwops->read(rwops, test_buf, 10, 3))
        RWOP_ERR_QUIT(rwops);
    if (SDL_memcmp(test_buf, "12345678901234567890", 20))
        RWOP_ERR_QUIT(rwops);
    rwops->close(rwops);
    SDL_Log("test3 OK\n");
/* test 4: same in r+ mode */
    rwops = SDL_RWFromFile(FBASENAME1, "rb+");  /* write + read + file must exists, no truncation */
    if (!rwops)
        RWOP_ERR_QUIT(rwops);
    if (1 != rwops->write(rwops, "1234567890", 10, 1))
        RWOP_ERR_QUIT(rwops);
    if (10 != rwops->write(rwops, "1234567890", 1, 10))
        RWOP_ERR_QUIT(rwops);
    if (7 != rwops->write(rwops, "1234567", 1, 7))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET))
        RWOP_ERR_QUIT(rwops);
    if (1 != rwops->read(rwops, test_buf, 1, 1))
        RWOP_ERR_QUIT(rwops);   /* we are in read/write mode */
    if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET))
        RWOP_ERR_QUIT(rwops);
    if (20 != rwops->seek(rwops, -7, RW_SEEK_END))
        RWOP_ERR_QUIT(rwops);
    if (7 != rwops->read(rwops, test_buf, 1, 7))
        RWOP_ERR_QUIT(rwops);
    if (SDL_memcmp(test_buf, "1234567", 7))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->read(rwops, test_buf, 1, 1))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->read(rwops, test_buf, 10, 100))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->seek(rwops, -27, RW_SEEK_CUR))
        RWOP_ERR_QUIT(rwops);
    if (2 != rwops->read(rwops, test_buf, 10, 3))
        RWOP_ERR_QUIT(rwops);
    if (SDL_memcmp(test_buf, "12345678901234567890", 20))
        RWOP_ERR_QUIT(rwops);
    rwops->close(rwops);
    SDL_Log("test4 OK\n");
/* test5 : append mode */
    rwops = SDL_RWFromFile(FBASENAME1, "ab+");  /* write + read + append */
    if (!rwops)
        RWOP_ERR_QUIT(rwops);
    if (1 != rwops->write(rwops, "1234567890", 10, 1))
        RWOP_ERR_QUIT(rwops);
    if (10 != rwops->write(rwops, "1234567890", 1, 10))
        RWOP_ERR_QUIT(rwops);
    if (7 != rwops->write(rwops, "1234567", 1, 7))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET))
        RWOP_ERR_QUIT(rwops);
    if (1 != rwops->read(rwops, test_buf, 1, 1))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET))
        RWOP_ERR_QUIT(rwops);
    if (20 + 27 != rwops->seek(rwops, -7, RW_SEEK_END))
        RWOP_ERR_QUIT(rwops);
    if (7 != rwops->read(rwops, test_buf, 1, 7))
        RWOP_ERR_QUIT(rwops);
    if (SDL_memcmp(test_buf, "1234567", 7))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->read(rwops, test_buf, 1, 1))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->read(rwops, test_buf, 10, 100))
        RWOP_ERR_QUIT(rwops);
    if (27 != rwops->seek(rwops, -27, RW_SEEK_CUR))
        RWOP_ERR_QUIT(rwops);
    if (0 != rwops->seek(rwops, 0L, RW_SEEK_SET))
        RWOP_ERR_QUIT(rwops);
    if (3 != rwops->read(rwops, test_buf, 10, 3))
        RWOP_ERR_QUIT(rwops);
    if (SDL_memcmp(test_buf, "123456789012345678901234567123", 30))
        RWOP_ERR_QUIT(rwops);
    rwops->close(rwops);
    SDL_Log("test5 OK\n");
    cleanup();
    return 0;                   /* all ok */
}

static void rwops_error_quit	(	unsigned	line,
		SDL_RWops *	rwops
	)

static

Definition at line 51 of file testfile.c.

References cleanup(), SDL_RWops::close, SDL_LOG_CATEGORY_APPLICATION, and SDL_LogError.

{
    SDL_LogError(SDL_LOG_CATEGORY_APPLICATION, "testfile.c(%d): failed\n", line);
    if (rwops) {
        rwops->close(rwops);    /* This calls SDL_FreeRW(rwops); */
    }
    cleanup();
    exit(1);                    /* quit with rwops error (test failed) */
}

Macros

Functions

Macro Definition Documentation

Function Documentation