rctTypes.cpp

Go to the documentation of this file.

// Copyright (c) 2016, Electroneum Research Labs
//
// Author: Shen Noether <shen.noether@gmx.com>
// 
// All rights reserved.
// 
// Redistribution and use in source and binary forms, with or without modification, are
// permitted provided that the following conditions are met:
// 
// 1. Redistributions of source code must retain the above copyright notice, this list of
//    conditions and the following disclaimer.
// 
// 2. Redistributions in binary form must reproduce the above copyright notice, this list
//    of conditions and the following disclaimer in the documentation and/or other
//    materials provided with the distribution.
// 
// 3. Neither the name of the copyright holder nor the names of its contributors may be
//    used to endorse or promote products derived from this software without specific
//    prior written permission.
// 
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
// EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
// THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
// PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
// INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
#include "misc_log_ex.h"
#include "cryptonote_config.h"
#include "rctTypes.h"
using namespace crypto;
using namespace std;
 
#undef ELECTRONEUM_DEFAULT_LOG_CATEGORY
#define ELECTRONEUM_DEFAULT_LOG_CATEGORY "ringct"
 
namespace rct {
 
    //dp 
    //Debug printing for the above types
    //Actually use DP(value) and #define DBG    
    
    void dp(key a) {
        int j = 0;
        printf("\"");
        for (j = 0; j < 32; j++) {
            printf("%02x", (unsigned char)a.bytes[j]);
        }
        printf("\"");
        printf("\n");
    }
 
    void dp(bool a) {
        printf(" ... %s ... ", a ? "true" : "false");
        printf("\n");
    }
 
    void dp(const char * a, int l) {
        int j = 0;
        printf("\"");
        for (j = 0; j < l; j++) {
            printf("%02x", (unsigned char)a[j]);
        }
        printf("\"");
        printf("\n");
    }
    void dp(keyV a) {
        size_t j = 0;
        printf("[");
        for (j = 0; j < a.size(); j++) {
            dp(a[j]);
            if (j < a.size() - 1) {
                printf(",");
            }
        }
        printf("]");
        printf("\n");
    }
    void dp(keyM a) {
        size_t j = 0;
        printf("[");
        for (j = 0; j < a.size(); j++) {
            dp(a[j]);
            if (j < a.size() - 1) {
                printf(",");
            }
        }
        printf("]");
        printf("\n");
    }
    void dp(etn_amount vali) {
        printf("x: ");
        std::cout << vali;
        printf("\n\n");
    }
 
    void dp(int vali) {
        printf("x: %d\n", vali);
        printf("\n");
    }
    void dp(bits amountb) {
        for (int i = 0; i < 64; i++) {
            printf("%d", amountb[i]);
        }
        printf("\n");
 
    }
 
    void dp(const char * st) {
        printf("%s\n", st);
    }
 
    //Various Conversions 
    
    //uint long long to 32 byte key
    void d2h(key & amounth, const etn_amount in) {
        sc_0(amounth.bytes);
        etn_amount val = in;
        int i = 0;
        while (val != 0) {
            amounth[i] = (unsigned char)(val & 0xFF);
            i++;
            val /= (etn_amount)256;
        }
    }
    
    //uint long long to 32 byte key
    key d2h(const etn_amount in) {
        key amounth;
        sc_0(amounth.bytes);
        etn_amount val = in;
        int i = 0;
        while (val != 0) {
            amounth[i] = (unsigned char)(val & 0xFF);
            i++;
            val /= (etn_amount)256;
        }
        return amounth;
    }
 
    //uint long long to int[64]
    void d2b(bits  amountb, etn_amount val) {
        int i = 0;
        while (val != 0) {
            amountb[i] = val & 1;
            i++;
            val >>= 1;
        }
        while (i < 64) {
            amountb[i] = 0;
            i++;
        }
    }
    
    //32 byte key to uint long long
    // if the key holds a value > 2^64
    // then the value in the first 8 bytes is returned    
    etn_amount h2d(const key & test) {
        etn_amount vali = 0;
        int j = 0;
        for (j = 7; j >= 0; j--) {
            vali = (etn_amount)(vali * 256 + (unsigned char)test.bytes[j]);
        }
        return vali;
    }
    
    //32 byte key to int[64]
    void h2b(bits amountb2, const key & test) {
        int val = 0, i = 0, j = 0;
        for (j = 0; j < 8; j++) {
            val = (unsigned char)test.bytes[j];
            i = 8 * j;
            while (val != 0) {
                amountb2[i] = val & 1;
                i++;
                val >>= 1;
            }
            while (i < 8 * (j + 1)) {
                amountb2[i] = 0;
                i++;
            }
        }
    }
    
    //int[64] to 32 byte key
    void b2h(key & amountdh, const bits amountb2) {
        int byte, i, j;
        for (j = 0; j < 8; j++) {
            byte = 0;
            i = 8 * j;
            for (i = 7; i > -1; i--) {
                byte = byte * 2 + amountb2[8 * j + i];
            }
            amountdh[j] = (unsigned char)byte;
        }
        for (j = 8; j < 32; j++) {
            amountdh[j] = (unsigned char)(0x00);
        }
    }
    
    //int[64] to uint long long
    etn_amount b2d(bits amountb) {
        etn_amount vali = 0;
        int j = 0;
        for (j = 63; j >= 0; j--) {
            vali = (etn_amount)(vali * 2 + amountb[j]);
        }
        return vali;
    }
 
    bool is_rct_simple(int type)
    {
        switch (type)
        {
            case RCTTypeSimple:
            case RCTTypeBulletproof:
            case RCTTypeBulletproof2:
                return true;
            default:
                return false;
        }
    }
 
    bool is_rct_bulletproof(int type)
    {
        switch (type)
        {
            case RCTTypeBulletproof:
            case RCTTypeBulletproof2:
                return true;
            default:
                return false;
        }
    }
 
    bool is_rct_borromean(int type)
    {
        switch (type)
        {
            case RCTTypeSimple:
            case RCTTypeFull:
                return true;
            default:
                return false;
        }
    }
 
    size_t n_bulletproof_amounts(const Bulletproof &proof)
    {
        CHECK_AND_ASSERT_MES(proof.L.size() >= 6, 0, "Invalid bulletproof L size");
        CHECK_AND_ASSERT_MES(proof.L.size() == proof.R.size(), 0, "Mismatched bulletproof L/R size");
        static const size_t extra_bits = 4;
        static_assert((1 << extra_bits) == BULLETPROOF_MAX_OUTPUTS, "log2(BULLETPROOF_MAX_OUTPUTS) is out of date");
        CHECK_AND_ASSERT_MES(proof.L.size() <= 6 + extra_bits, 0, "Invalid bulletproof L size");
        CHECK_AND_ASSERT_MES(proof.V.size() <= (1u<<(proof.L.size()-6)), 0, "Invalid bulletproof V/L");
        CHECK_AND_ASSERT_MES(proof.V.size() * 2 > (1u<<(proof.L.size()-6)), 0, "Invalid bulletproof V/L");
        CHECK_AND_ASSERT_MES(proof.V.size() > 0, 0, "Empty bulletproof");
        return proof.V.size();
    }
 
    size_t n_bulletproof_amounts(const std::vector<Bulletproof> &proofs)
    {
        size_t n = 0;
        for (const Bulletproof &proof: proofs)
        {
            size_t n2 = n_bulletproof_amounts(proof);
            CHECK_AND_ASSERT_MES(n2 < std::numeric_limits<uint32_t>::max() - n, 0, "Invalid number of bulletproofs");
            if (n2 == 0)
                return 0;
            n += n2;
        }
        return n;
    }
 
    size_t n_bulletproof_max_amounts(const Bulletproof &proof)
    {
        CHECK_AND_ASSERT_MES(proof.L.size() >= 6, 0, "Invalid bulletproof L size");
        CHECK_AND_ASSERT_MES(proof.L.size() == proof.R.size(), 0, "Mismatched bulletproof L/R size");
        static const size_t extra_bits = 4;
        static_assert((1 << extra_bits) == BULLETPROOF_MAX_OUTPUTS, "log2(BULLETPROOF_MAX_OUTPUTS) is out of date");
        CHECK_AND_ASSERT_MES(proof.L.size() <= 6 + extra_bits, 0, "Invalid bulletproof L size");
        return 1 << (proof.L.size() - 6);
    }
 
    size_t n_bulletproof_max_amounts(const std::vector<Bulletproof> &proofs)
    {
        size_t n = 0;
        for (const Bulletproof &proof: proofs)
        {
            size_t n2 = n_bulletproof_max_amounts(proof);
            CHECK_AND_ASSERT_MES(n2 < std::numeric_limits<uint32_t>::max() - n, 0, "Invalid number of bulletproofs");
            if (n2 == 0)
                return 0;
            n += n2;
        }
        return n;
    }
 
}