5 #ifndef BITCOIN_INTERFACES_CHAIN_H 6 #define BITCOIN_INTERFACES_CHAIN_H 8 #include <blockfilter.h> 130 virtual std::optional<int>
getHeight() = 0;
176 const FoundBlock& ancestor_out={}) = 0;
182 const FoundBlock& ancestor_out={},
183 const FoundBlock& block1_out={},
184 const FoundBlock& block2_out={}) = 0;
189 virtual void findCoins(std::map<COutPoint, Coin>& coins) = 0;
198 virtual bool hasBlocks(
const uint256& block_hash,
int min_height = 0, std::optional<int> max_height = {}) = 0;
215 std::string& err_string) = 0;
260 virtual void getPackageLimits(
unsigned int& limit_ancestor_count,
unsigned int& limit_descendant_count) = 0;
296 virtual void initMessage(
const std::string& message) = 0;
305 virtual void showProgress(
const std::string& title,
int progress,
bool resume_possible) = 0;
321 virtual std::unique_ptr<Handler>
handleNotifications(std::shared_ptr<Notifications> notifications) = 0;
335 virtual void rpcRunLater(
const std::string&
name, std::function<
void()> fn, int64_t seconds) = 0;
344 virtual std::vector<common::SettingsValue>
getSettingsList(
const std::string& arg) = 0;
382 virtual bool verify() = 0;
385 virtual bool load() = 0;
391 virtual void flush() = 0;
394 virtual void stop() = 0;
405 #endif // BITCOIN_INTERFACES_CHAIN_H std::shared_ptr< const CTransaction > CTransactionRef
virtual bool haveBlockOnDisk(int height)=0
Check that the block is available on disk (i.e.
Helper for findBlock to selectively return pieces of block data.
virtual bool findCommonAncestor(const uint256 &block_hash1, const uint256 &block_hash2, const FoundBlock &ancestor_out={}, const FoundBlock &block1_out={}, const FoundBlock &block2_out={})=0
Find most recent common ancestor between two blocks and optionally return block information.
FoundBlock & locator(CBlockLocator &locator)
Return locator if block is in the active chain.
virtual void findCoins(std::map< COutPoint, Coin > &coins)=0
Look up unspent output information.
virtual void getTransactionAncestry(const uint256 &txid, size_t &ancestors, size_t &descendants, size_t *ancestorsize=nullptr, CAmount *ancestorfees=nullptr)=0
Calculate mempool ancestor and descendant counts for the given transaction.
virtual void getPackageLimits(unsigned int &limit_ancestor_count, unsigned int &limit_descendant_count)=0
Get the node's package limits.
virtual bool updateRwSetting(const std::string &name, const common::SettingsValue &value, bool write=true)=0
Write a setting to <datadir>/settings.json.
virtual int rpcSerializationFlags()=0
Current RPC serialization flags.
virtual std::optional< int > getHeight()=0
Get current chain height, not including genesis block (returns 0 if chain only contains genesis block...
virtual bool findFirstBlockWithTimeAndHeight(int64_t min_time, int min_height, const FoundBlock &block={})=0
Find first block in the chain with timestamp >= the given time and height >= than the given height...
Describes a place in the block chain to another node such that if the other node doesn't have the sam...
virtual std::unique_ptr< Handler > handleNotifications(std::shared_ptr< Notifications > notifications)=0
Register handler for notifications.
virtual void registerRpcs()=0
Register rpcs.
virtual void transactionRemovedFromMempool(const CTransactionRef &tx, MemPoolRemovalReason reason)
virtual uint256 getBlockHash(int height)=0
Get block hash. Height must be valid or this function will abort.
virtual CFeeRate mempoolMinFee()=0
Mempool minimum fee.
virtual common::SettingsValue getSetting(const std::string &arg)=0
Get settings value.
virtual CBlockLocator getActiveChainLocator(const uint256 &block_hash)=0
Return a locator that refers to a block in the active chain.
virtual void rpcRunLater(const std::string &name, std::function< void()> fn, int64_t seconds)=0
Run function after given number of seconds. Cancel any previous calls with same name.
virtual CFeeRate relayDustFee()=0
Relay dust fee setting (-dustrelayfee), reflecting lowest rate it's economical to spend...
virtual bool hasBlockFilterIndex(BlockFilterType filter_type)=0
Returns whether a block filter index is available.
virtual std::vector< common::SettingsValue > getSettingsList(const std::string &arg)=0
Get list of settings values.
BlockInfo(const uint256 &hash LIFETIMEBOUND)
MemPoolRemovalReason
Reason why a transaction was removed from the mempool, this is passed to the notification signal...
virtual bool isInitialBlockDownload()=0
Check if in IBD.
virtual void stop()=0
Shut down client.
virtual void updatedBlockTip()
virtual double guessVerificationProgress(const uint256 &block_hash)=0
Estimate fraction of total transactions verified if blocks up to the specified block hash are verifie...
virtual bool load()=0
Load saved state.
CBlockLocator * m_locator
virtual void blockConnected(ChainstateRole role, const BlockInfo &block)
RBFTransactionState
The rbf state of unconfirmed transactions.
virtual void transactionAddedToMempool(const CTransactionRef &tx)
int64_t CAmount
Amount in satoshis (Can be negative)
virtual std::optional< int > findLocatorFork(const CBlockLocator &locator)=0
Return height of the highest block on chain in common with the locator, which will either be the orig...
FoundBlock & data(CBlock &data)
Read block data from disk.
virtual bool hasDescendantsInMempool(const uint256 &txid)=0
Check if transaction has descendants in mempool.
Block data sent with blockConnected, blockDisconnected notifications.
NodeContext struct containing references to chain state and connection state.
virtual void setMockTime(int64_t time)=0
Set mock time.
virtual bool hasAssumedValidChain()=0
Return true if an assumed-valid chain is in use.
virtual bool isInMempool(const uint256 &txid)=0
Check if transaction is in mempool.
virtual bool findAncestorByHeight(const uint256 &block_hash, int ancestor_height, const FoundBlock &ancestor_out={})=0
Find ancestor of block at specified height and optionally return ancestor information.
const uint256 * prev_hash
ChainstateRole
This enum describes the various roles a specific Chainstate instance can take.
virtual CFeeRate estimateSmartFee(int num_blocks, bool conservative, FeeCalculation *calc=nullptr)=0
Estimate smart fee.
const FoundBlock * m_next_block
FoundBlock & maxTime(int64_t &max_time)
virtual std::unique_ptr< Handler > handleRpc(const CRPCCommand &command)=0
Register handler for RPC.
virtual void start(CScheduler &scheduler)=0
Start client execution and provide a scheduler.
virtual bool findBlock(const uint256 &hash, const FoundBlock &block={})=0
Return whether node has the block and optionally return block metadata or contents.
virtual void waitForNotificationsIfTipChanged(const uint256 &old_tip)=0
Wait for pending notifications to be processed unless block hash points to the current chain tip...
virtual void requestMempoolTransactions(Notifications ¬ifications)=0
Synchronously send transactionAddedToMempool notifications about all current mempool transactions to ...
virtual std::optional< CAmount > CalculateCombinedBumpFee(const std::vector< COutPoint > &outpoints, const CFeeRate &target_feerate)=0
Calculate the combined bump fee for an input set per the same strategy.
virtual void chainStateFlushed(ChainstateRole role, const CBlockLocator &locator)
virtual void flush()=0
Save state to disk.
virtual bool verify()=0
Check for errors before loading.
std::unordered_set< Element, ByteVectorHash > ElementSet
virtual void initWarning(const bilingual_str &message)=0
Send init warning.
virtual std::map< COutPoint, CAmount > CalculateIndividualBumpFees(const std::vector< COutPoint > &outpoints, const CFeeRate &target_feerate)=0
For each outpoint, calculate the fee-bumping cost to spend this outpoint at the specified.
virtual node::NodeContext * context()
Get internal node context.
virtual bool isReadyToBroadcast()=0
Check if the node is ready to broadcast transactions.
virtual bool checkChainLimits(const CTransactionRef &tx)=0
Check if transaction will pass the mempool's chain limits.
std::unique_ptr< Chain > MakeChain(node::NodeContext &node)
Return implementation of Chain interface.
virtual bool findAncestorByHash(const uint256 &block_hash, const uint256 &ancestor_hash, const FoundBlock &ancestor_out={})=0
Return whether block descends from a specified ancestor, and optionally return ancestor information...
Interface to let node manage chain clients (wallets, or maybe tools for monitoring and analysis in th...
Interface giving clients (wallet processes, maybe other analysis tools in the future) ability to acce...
virtual void blockDisconnected(const BlockInfo &block)
Undo information for a CBlock.
Hash/height pair to help track and identify blocks.
virtual void initMessage(const std::string &message)=0
Send init message.
Fee rate in satoshis per kilovirtualbyte: CAmount / kvB.
FoundBlock & hash(uint256 &hash)
virtual RBFTransactionState isRBFOptIn(const CTransaction &tx)=0
Check if transaction is RBF opt in.
virtual bool hasBlocks(const uint256 &block_hash, int min_height=0, std::optional< int > max_height={})=0
Return true if data is available for all blocks in the specified range of blocks. ...
virtual void showProgress(const std::string &title, int progress, bool resume_possible)=0
Send progress indicator.
virtual unsigned int estimateMaxBlocks()=0
Fee estimator max target.
virtual bool shutdownRequested()=0
Check if shutdown requested.
FoundBlock & inActiveChain(bool &in_active_chain)
Return whether block is in the active (most-work) chain.
FoundBlock & height(int &height)
virtual bool broadcastTransaction(const CTransactionRef &tx, const CAmount &max_tx_fee, bool relay, std::string &err_string)=0
Transaction is added to memory pool, if the transaction fee is below the amount specified by max_tx_f...
The basic transaction that is broadcasted on the network and contained in blocks. ...
FoundBlock & mtpTime(int64_t &mtp_time)
Simple class for background tasks that should be run periodically or once "after a while"...
virtual CBlockLocator getTipLocator()=0
Get locator for the current chain tip.
virtual bool rpcEnableDeprecated(const std::string &method)=0
Check if deprecated RPC is enabled.
unsigned int chain_time_max
virtual common::SettingsValue getRwSetting(const std::string &name)=0
Return <datadir>/settings.json setting value.
const CBlockUndo * undo_data
virtual void initError(const bilingual_str &message)=0
Send init error.
virtual CFeeRate relayIncrementalFee()=0
Relay incremental fee setting (-incrementalrelayfee), reflecting cost of relay.
virtual CFeeRate relayMinFee()=0
Relay current minimum fee (from -minrelaytxfee and -incrementalrelayfee settings).
FoundBlock & nextBlock(const FoundBlock &next_block)
Return next block in the active chain if current block is in the active chain.
FoundBlock & time(int64_t &time)
virtual bool havePruned()=0
Check if any block has been pruned.
virtual std::optional< bool > blockFilterMatchesAny(BlockFilterType filter_type, const uint256 &block_hash, const GCSFilter::ElementSet &filter_set)=0
Returns whether any of the elements match the block via a BIP 157 block filter or std::nullopt if the...