gtest-port.h

Go to the documentation of this file.

// Copyright 2005, Google Inc.
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions are
// met:
//
//     * Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//     * Redistributions in binary form must reproduce the above
// copyright notice, this list of conditions and the following disclaimer
// in the documentation and/or other materials provided with the
// distribution.
//     * Neither the name of Google Inc. nor the names of its
// contributors may be used to endorse or promote products derived from
// this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// Authors: wan@google.com (Zhanyong Wan)
//
// Low-level types and utilities for porting Google Test to various
// platforms.  All macros ending with _ and symbols defined in an
// internal namespace are subject to change without notice.  Code
// outside Google Test MUST NOT USE THEM DIRECTLY.  Macros that don't
// end with _ are part of Google Test's public API and can be used by
// code outside Google Test.
//
// This file is fundamental to Google Test.  All other Google Test source
// files are expected to #include this.  Therefore, it cannot #include
// any other Google Test header.
 
#ifndef GTEST_INCLUDE_GTEST_INTERNAL_GTEST_PORT_H_
#define GTEST_INCLUDE_GTEST_INTERNAL_GTEST_PORT_H_
 
// Environment-describing macros
// -----------------------------
//
// Google Test can be used in many different environments.  Macros in
// this section tell Google Test what kind of environment it is being
// used in, such that Google Test can provide environment-specific
// features and implementations.
//
// Google Test tries to automatically detect the properties of its
// environment, so users usually don't need to worry about these
// macros.  However, the automatic detection is not perfect.
// Sometimes it's necessary for a user to define some of the following
// macros in the build script to override Google Test's decisions.
//
// If the user doesn't define a macro in the list, Google Test will
// provide a default definition.  After this header is #included, all
// macros in this list will be defined to either 1 or 0.
//
// Notes to maintainers:
//   - Each macro here is a user-tweakable knob; do not grow the list
//     lightly.
//   - Use #if to key off these macros.  Don't use #ifdef or "#if
//     defined(...)", which will not work as these macros are ALWAYS
//     defined.
//
//   GTEST_HAS_CLONE          - Define it to 1/0 to indicate that clone(2)
//                              is/isn't available.
//   GTEST_HAS_EXCEPTIONS     - Define it to 1/0 to indicate that exceptions
//                              are enabled.
//   GTEST_HAS_GLOBAL_STRING  - Define it to 1/0 to indicate that ::string
//                              is/isn't available (some systems define
//                              ::string, which is different to std::string).
//   GTEST_HAS_GLOBAL_WSTRING - Define it to 1/0 to indicate that ::string
//                              is/isn't available (some systems define
//                              ::wstring, which is different to std::wstring).
//   GTEST_HAS_POSIX_RE       - Define it to 1/0 to indicate that POSIX regular
//                              expressions are/aren't available.
//   GTEST_HAS_PTHREAD        - Define it to 1/0 to indicate that <pthread.h>
//                              is/isn't available.
//   GTEST_HAS_RTTI           - Define it to 1/0 to indicate that RTTI is/isn't
//                              enabled.
//   GTEST_HAS_STD_WSTRING    - Define it to 1/0 to indicate that
//                              std::wstring does/doesn't work (Google Test can
//                              be used where std::wstring is unavailable).
//   GTEST_HAS_TR1_TUPLE      - Define it to 1/0 to indicate tr1::tuple
//                              is/isn't available.
//   GTEST_HAS_SEH            - Define it to 1/0 to indicate whether the
//                              compiler supports Microsoft's "Structured
//                              Exception Handling".
//   GTEST_HAS_STREAM_REDIRECTION
//                            - Define it to 1/0 to indicate whether the
//                              platform supports I/O stream redirection using
//                              dup() and dup2().
//   GTEST_USE_OWN_TR1_TUPLE  - Define it to 1/0 to indicate whether Google
//                              Test's own tr1 tuple implementation should be
//                              used.  Unused when the user sets
//                              GTEST_HAS_TR1_TUPLE to 0.
//   GTEST_LANG_CXX11         - Define it to 1/0 to indicate that Google Test
//                              is building in C++11/C++98 mode.
//   GTEST_LINKED_AS_SHARED_LIBRARY
//                            - Define to 1 when compiling tests that use
//                              Google Test as a shared library (known as
//                              DLL on Windows).
//   GTEST_CREATE_SHARED_LIBRARY
//                            - Define to 1 when compiling Google Test itself
//                              as a shared library.
 
// Platform-indicating macros
// --------------------------
//
// Macros indicating the platform on which Google Test is being used
// (a macro is defined to 1 if compiled on the given platform;
// otherwise UNDEFINED -- it's never defined to 0.).  Google Test
// defines these macros automatically.  Code outside Google Test MUST
// NOT define them.
//
//   GTEST_OS_AIX      - IBM AIX
//   GTEST_OS_CYGWIN   - Cygwin
//   GTEST_OS_FREEBSD  - FreeBSD
//   GTEST_OS_HPUX     - HP-UX
//   GTEST_OS_LINUX    - Linux
//     GTEST_OS_LINUX_ANDROID - Google Android
//   GTEST_OS_MAC      - Mac OS X
//     GTEST_OS_IOS    - iOS
//   GTEST_OS_NACL     - Google Native Client (NaCl)
//   GTEST_OS_OPENBSD  - OpenBSD
//   GTEST_OS_QNX      - QNX
//   GTEST_OS_SOLARIS  - Sun Solaris
//   GTEST_OS_SYMBIAN  - Symbian
//   GTEST_OS_WINDOWS  - Windows (Desktop, MinGW, or Mobile)
//     GTEST_OS_WINDOWS_DESKTOP  - Windows Desktop
//     GTEST_OS_WINDOWS_MINGW    - MinGW
//     GTEST_OS_WINDOWS_MOBILE   - Windows Mobile
//     GTEST_OS_WINDOWS_PHONE    - Windows Phone
//     GTEST_OS_WINDOWS_RT       - Windows Store App/WinRT
//   GTEST_OS_ZOS      - z/OS
//
// Among the platforms, Cygwin, Linux, Max OS X, and Windows have the
// most stable support.  Since core members of the Google Test project
// don't have access to other platforms, support for them may be less
// stable.  If you notice any problems on your platform, please notify
// googletestframework@googlegroups.com (patches for fixing them are
// even more welcome!).
//
// It is possible that none of the GTEST_OS_* macros are defined.
 
// Feature-indicating macros
// -------------------------
//
// Macros indicating which Google Test features are available (a macro
// is defined to 1 if the corresponding feature is supported;
// otherwise UNDEFINED -- it's never defined to 0.).  Google Test
// defines these macros automatically.  Code outside Google Test MUST
// NOT define them.
//
// These macros are public so that portable tests can be written.
// Such tests typically surround code using a feature with an #if
// which controls that code.  For example:
//
// #if GTEST_HAS_DEATH_TEST
//   EXPECT_DEATH(DoSomethingDeadly());
// #endif
//
//   GTEST_HAS_COMBINE      - the Combine() function (for value-parameterized
//                            tests)
//   GTEST_HAS_DEATH_TEST   - death tests
//   GTEST_HAS_PARAM_TEST   - value-parameterized tests
//   GTEST_HAS_TYPED_TEST   - typed tests
//   GTEST_HAS_TYPED_TEST_P - type-parameterized tests
//   GTEST_IS_THREADSAFE    - Google Test is thread-safe.
//   GTEST_USES_POSIX_RE    - enhanced POSIX regex is used. Do not confuse with
//                            GTEST_HAS_POSIX_RE (see above) which users can
//                            define themselves.
//   GTEST_USES_SIMPLE_RE   - our own simple regex is used;
//                            the above two are mutually exclusive.
//   GTEST_CAN_COMPARE_NULL - accepts untyped NULL in EXPECT_EQ().
 
// Misc public macros
// ------------------
//
//   GTEST_FLAG(flag_name)  - references the variable corresponding to
//                            the given Google Test flag.
 
// Internal utilities
// ------------------
//
// The following macros and utilities are for Google Test's INTERNAL
// use only.  Code outside Google Test MUST NOT USE THEM DIRECTLY.
//
// Macros for basic C++ coding:
//   GTEST_AMBIGUOUS_ELSE_BLOCKER_ - for disabling a gcc warning.
//   GTEST_ATTRIBUTE_UNUSED_  - declares that a class' instances or a
//                              variable don't have to be used.
//   GTEST_DISALLOW_ASSIGN_   - disables operator=.
//   GTEST_DISALLOW_COPY_AND_ASSIGN_ - disables copy ctor and operator=.
//   GTEST_MUST_USE_RESULT_   - declares that a function's result must be used.
//   GTEST_INTENTIONAL_CONST_COND_PUSH_ - start code section where MSVC C4127 is
//                                        suppressed (constant conditional).
//   GTEST_INTENTIONAL_CONST_COND_POP_  - finish code section where MSVC C4127
//                                        is suppressed.
//
// C++11 feature wrappers:
//
//   testing::internal::move  - portability wrapper for std::move.
//
// Synchronization:
//   Mutex, MutexLock, ThreadLocal, GetThreadCount()
//                            - synchronization primitives.
//
// Template meta programming:
//   is_pointer     - as in TR1; needed on Symbian and IBM XL C/C++ only.
//   IteratorTraits - partial implementation of std::iterator_traits, which
//                    is not available in libCstd when compiled with Sun C++.
//
// Smart pointers:
//   scoped_ptr     - as in TR2.
//
// Regular expressions:
//   RE             - a simple regular expression class using the POSIX
//                    Extended Regular Expression syntax on UNIX-like
//                    platforms, or a reduced regular exception syntax on
//                    other platforms, including Windows.
//
// Logging:
//   GTEST_LOG_()   - logs messages at the specified severity level.
//   LogToStderr()  - directs all log messages to stderr.
//   FlushInfoLog() - flushes informational log messages.
//
// Stdout and stderr capturing:
//   CaptureStdout()     - starts capturing stdout.
//   GetCapturedStdout() - stops capturing stdout and returns the captured
//                         string.
//   CaptureStderr()     - starts capturing stderr.
//   GetCapturedStderr() - stops capturing stderr and returns the captured
//                         string.
//
// Integer types:
//   TypeWithSize   - maps an integer to a int type.
//   Int32, UInt32, Int64, UInt64, TimeInMillis
//                  - integers of known sizes.
//   BiggestInt     - the biggest signed integer type.
//
// Command-line utilities:
//   GTEST_DECLARE_*()  - declares a flag.
//   GTEST_DEFINE_*()   - defines a flag.
//   GetInjectableArgvs() - returns the command line as a vector of strings.
//
// Environment variable utilities:
//   GetEnv()             - gets the value of an environment variable.
//   BoolFromGTestEnv()   - parses a bool environment variable.
//   Int32FromGTestEnv()  - parses an Int32 environment variable.
//   StringFromGTestEnv() - parses a string environment variable.
 
#include <ctype.h>   // for isspace, etc
#include <stddef.h>  // for ptrdiff_t
#include <stdlib.h>
#include <stdio.h>
#include <string.h>
#ifndef _WIN32_WCE
# include <sys/types.h>
# include <sys/stat.h>
#endif  // !_WIN32_WCE
 
#if defined __APPLE__
# include <AvailabilityMacros.h>
# include <TargetConditionals.h>
#endif
 
#include <algorithm>  // NOLINT
#include <iostream>  // NOLINT
#include <sstream>  // NOLINT
#include <string>  // NOLINT
#include <utility>
#include <vector>  // NOLINT
 
#include "gtest/internal/gtest-port-arch.h"
#include "gtest/internal/custom/gtest-port.h"
 
#if !defined(GTEST_DEV_EMAIL_)
# define GTEST_DEV_EMAIL_ "googletestframework@@googlegroups.com"
# define GTEST_FLAG_PREFIX_ "gtest_"
# define GTEST_FLAG_PREFIX_DASH_ "gtest-"
# define GTEST_FLAG_PREFIX_UPPER_ "GTEST_"
# define GTEST_NAME_ "Google Test"
# define GTEST_PROJECT_URL_ "https://github.com/google/googletest/"
#endif  // !defined(GTEST_DEV_EMAIL_)
 
#if !defined(GTEST_INIT_GOOGLE_TEST_NAME_)
# define GTEST_INIT_GOOGLE_TEST_NAME_ "testing::InitGoogleTest"
#endif  // !defined(GTEST_INIT_GOOGLE_TEST_NAME_)
 
// Determines the version of gcc that is used to compile this.
#ifdef __GNUC__
// 40302 means version 4.3.2.
# define GTEST_GCC_VER_ \
    (__GNUC__*10000 + __GNUC_MINOR__*100 + __GNUC_PATCHLEVEL__)
#endif  // __GNUC__
 
// Macros for disabling Microsoft Visual C++ warnings.
//
//   GTEST_DISABLE_MSC_WARNINGS_PUSH_(4800 4385)
//   /* code that triggers warnings C4800 and C4385 */
//   GTEST_DISABLE_MSC_WARNINGS_POP_()
#if _MSC_VER >= 1500
# define GTEST_DISABLE_MSC_WARNINGS_PUSH_(warnings) \
    __pragma(warning(push))                        \
    __pragma(warning(disable: warnings))
# define GTEST_DISABLE_MSC_WARNINGS_POP_()          \
    __pragma(warning(pop))
#else
// Older versions of MSVC don't have __pragma.
# define GTEST_DISABLE_MSC_WARNINGS_PUSH_(warnings)
# define GTEST_DISABLE_MSC_WARNINGS_POP_()
#endif
 
#ifndef GTEST_LANG_CXX11
// gcc and clang define __GXX_EXPERIMENTAL_CXX0X__ when
// -std={c,gnu}++{0x,11} is passed.  The C++11 standard specifies a
// value for __cplusplus, and recent versions of clang, gcc, and
// probably other compilers set that too in C++11 mode.
# if __GXX_EXPERIMENTAL_CXX0X__ || __cplusplus >= 201103L
// Compiling in at least C++11 mode.
#  define GTEST_LANG_CXX11 1
# else
#  define GTEST_LANG_CXX11 0
# endif
#endif
 
// Distinct from C++11 language support, some environments don't provide
// proper C++11 library support. Notably, it's possible to build in
// C++11 mode when targeting Mac OS X 10.6, which has an old libstdc++
// with no C++11 support.
//
// libstdc++ has sufficient C++11 support as of GCC 4.6.0, __GLIBCXX__
// 20110325, but maintenance releases in the 4.4 and 4.5 series followed
// this date, so check for those versions by their date stamps.
// https://gcc.gnu.org/onlinedocs/libstdc++/manual/abi.html#abi.versioning
#if GTEST_LANG_CXX11 && \
    (!defined(__GLIBCXX__) || ( \
        __GLIBCXX__ >= 20110325ul &&  /* GCC >= 4.6.0 */ \
        /* Blacklist of patch releases of older branches: */ \
        __GLIBCXX__ != 20110416ul &&  /* GCC 4.4.6 */ \
        __GLIBCXX__ != 20120313ul &&  /* GCC 4.4.7 */ \
        __GLIBCXX__ != 20110428ul &&  /* GCC 4.5.3 */ \
        __GLIBCXX__ != 20120702ul))   /* GCC 4.5.4 */
# define GTEST_STDLIB_CXX11 1
#endif
 
// Only use C++11 library features if the library provides them.
#if GTEST_STDLIB_CXX11
# define GTEST_HAS_STD_BEGIN_AND_END_ 1
# define GTEST_HAS_STD_FORWARD_LIST_ 1
# define GTEST_HAS_STD_FUNCTION_ 1
# define GTEST_HAS_STD_INITIALIZER_LIST_ 1
# define GTEST_HAS_STD_MOVE_ 1
# define GTEST_HAS_STD_SHARED_PTR_ 1
# define GTEST_HAS_STD_TYPE_TRAITS_ 1
# define GTEST_HAS_STD_UNIQUE_PTR_ 1
#endif
 
// C++11 specifies that <tuple> provides std::tuple.
// Some platforms still might not have it, however.
#if GTEST_LANG_CXX11
# define GTEST_HAS_STD_TUPLE_ 1
# if defined(__clang__)
// Inspired by http://clang.llvm.org/docs/LanguageExtensions.html#__has_include
#  if defined(__has_include) && !__has_include(<tuple>)
#   undef GTEST_HAS_STD_TUPLE_
#  endif
# elif defined(_MSC_VER)
// Inspired by boost/config/stdlib/dinkumware.hpp
#  if defined(_CPPLIB_VER) && _CPPLIB_VER < 520
#   undef GTEST_HAS_STD_TUPLE_
#  endif
# elif defined(__GLIBCXX__)
// Inspired by boost/config/stdlib/libstdcpp3.hpp,
// http://gcc.gnu.org/gcc-4.2/changes.html and
// http://gcc.gnu.org/onlinedocs/libstdc++/manual/bk01pt01ch01.html#manual.intro.status.standard.200x
#  if __GNUC__ < 4 || (__GNUC__ == 4 && __GNUC_MINOR__ < 2)
#   undef GTEST_HAS_STD_TUPLE_
#  endif
# endif
#endif
 
// Brings in definitions for functions used in the testing::internal::posix
// namespace (read, write, close, chdir, isatty, stat). We do not currently
// use them on Windows Mobile.
#if GTEST_OS_WINDOWS
# if !GTEST_OS_WINDOWS_MOBILE
#  include <direct.h>
#  include <io.h>
# endif
// In order to avoid having to include <windows.h>, use forward declaration
// assuming CRITICAL_SECTION is a typedef of _RTL_CRITICAL_SECTION.
// This assumption is verified by
// WindowsTypesTest.CRITICAL_SECTIONIs_RTL_CRITICAL_SECTION.
struct _RTL_CRITICAL_SECTION;
#else
// This assumes that non-Windows OSes provide unistd.h. For OSes where this
// is not the case, we need to include headers that provide the functions
// mentioned above.
# include <unistd.h>
# include <strings.h>
#endif  // GTEST_OS_WINDOWS
 
#if GTEST_OS_LINUX_ANDROID
// Used to define __ANDROID_API__ matching the target NDK API level.
#  include <android/api-level.h>  // NOLINT
#endif
 
// Defines this to true iff Google Test can use POSIX regular expressions.
#ifndef GTEST_HAS_POSIX_RE
# if GTEST_OS_LINUX_ANDROID
// On Android, <regex.h> is only available starting with Gingerbread.
#  define GTEST_HAS_POSIX_RE (__ANDROID_API__ >= 9)
# else
#  define GTEST_HAS_POSIX_RE (!GTEST_OS_WINDOWS)
# endif
#endif
 
#if GTEST_USES_PCRE
// The appropriate headers have already been included.
 
#elif GTEST_HAS_POSIX_RE
 
// On some platforms, <regex.h> needs someone to define size_t, and
// won't compile otherwise.  We can #include it here as we already
// included <stdlib.h>, which is guaranteed to define size_t through
// <stddef.h>.
# include <regex.h>  // NOLINT
 
# define GTEST_USES_POSIX_RE 1
 
#elif GTEST_OS_WINDOWS
 
// <regex.h> is not available on Windows.  Use our own simple regex
// implementation instead.
# define GTEST_USES_SIMPLE_RE 1
 
#else
 
// <regex.h> may not be available on this platform.  Use our own
// simple regex implementation instead.
# define GTEST_USES_SIMPLE_RE 1
 
#endif  // GTEST_USES_PCRE
 
#ifndef GTEST_HAS_EXCEPTIONS
// The user didn't tell us whether exceptions are enabled, so we need
// to figure it out.
# if defined(_MSC_VER) || defined(__BORLANDC__)
// MSVC's and C++Builder's implementations of the STL use the _HAS_EXCEPTIONS
// macro to enable exceptions, so we'll do the same.
// Assumes that exceptions are enabled by default.
#  ifndef _HAS_EXCEPTIONS
#   define _HAS_EXCEPTIONS 1
#  endif  // _HAS_EXCEPTIONS
#  define GTEST_HAS_EXCEPTIONS _HAS_EXCEPTIONS
# elif defined(__clang__)
// clang defines __EXCEPTIONS iff exceptions are enabled before clang 220714,
// but iff cleanups are enabled after that. In Obj-C++ files, there can be
// cleanups for ObjC exceptions which also need cleanups, even if C++ exceptions
// are disabled. clang has __has_feature(cxx_exceptions) which checks for C++
// exceptions starting at clang r206352, but which checked for cleanups prior to
// that. To reliably check for C++ exception availability with clang, check for
// __EXCEPTIONS && __has_feature(cxx_exceptions).
#  define GTEST_HAS_EXCEPTIONS (__EXCEPTIONS && __has_feature(cxx_exceptions))
# elif defined(__GNUC__) && __EXCEPTIONS
// gcc defines __EXCEPTIONS to 1 iff exceptions are enabled.
#  define GTEST_HAS_EXCEPTIONS 1
# elif defined(__SUNPRO_CC)
// Sun Pro CC supports exceptions.  However, there is no compile-time way of
// detecting whether they are enabled or not.  Therefore, we assume that
// they are enabled unless the user tells us otherwise.
#  define GTEST_HAS_EXCEPTIONS 1
# elif defined(__IBMCPP__) && __EXCEPTIONS
// xlC defines __EXCEPTIONS to 1 iff exceptions are enabled.
#  define GTEST_HAS_EXCEPTIONS 1
# elif defined(__HP_aCC)
// Exception handling is in effect by default in HP aCC compiler. It has to
// be turned of by +noeh compiler option if desired.
#  define GTEST_HAS_EXCEPTIONS 1
# else
// For other compilers, we assume exceptions are disabled to be
// conservative.
#  define GTEST_HAS_EXCEPTIONS 0
# endif  // defined(_MSC_VER) || defined(__BORLANDC__)
#endif  // GTEST_HAS_EXCEPTIONS
 
#if !defined(GTEST_HAS_STD_STRING)
// Even though we don't use this macro any longer, we keep it in case
// some clients still depend on it.
# define GTEST_HAS_STD_STRING 1
#elif !GTEST_HAS_STD_STRING
// The user told us that ::std::string isn't available.
# error "Google Test cannot be used where ::std::string isn't available."
#endif  // !defined(GTEST_HAS_STD_STRING)
 
#ifndef GTEST_HAS_GLOBAL_STRING
// The user didn't tell us whether ::string is available, so we need
// to figure it out.
 
# define GTEST_HAS_GLOBAL_STRING 0
 
#endif  // GTEST_HAS_GLOBAL_STRING
 
#ifndef GTEST_HAS_STD_WSTRING
// The user didn't tell us whether ::std::wstring is available, so we need
// to figure it out.
// TODO(wan@google.com): uses autoconf to detect whether ::std::wstring
//   is available.
 
// Cygwin 1.7 and below doesn't support ::std::wstring.
// Solaris' libc++ doesn't support it either.  Android has
// no support for it at least as recent as Froyo (2.2).
# define GTEST_HAS_STD_WSTRING \
    (!(GTEST_OS_LINUX_ANDROID || GTEST_OS_CYGWIN || GTEST_OS_SOLARIS))
 
#endif  // GTEST_HAS_STD_WSTRING
 
#ifndef GTEST_HAS_GLOBAL_WSTRING
// The user didn't tell us whether ::wstring is available, so we need
// to figure it out.
# define GTEST_HAS_GLOBAL_WSTRING \
    (GTEST_HAS_STD_WSTRING && GTEST_HAS_GLOBAL_STRING)
#endif  // GTEST_HAS_GLOBAL_WSTRING
 
// Determines whether RTTI is available.
#ifndef GTEST_HAS_RTTI
// The user didn't tell us whether RTTI is enabled, so we need to
// figure it out.
 
# ifdef _MSC_VER
 
#  ifdef _CPPRTTI  // MSVC defines this macro iff RTTI is enabled.
#   define GTEST_HAS_RTTI 1
#  else
#   define GTEST_HAS_RTTI 0
#  endif
 
// Starting with version 4.3.2, gcc defines __GXX_RTTI iff RTTI is enabled.
# elif defined(__GNUC__) && (GTEST_GCC_VER_ >= 40302)
 
#  ifdef __GXX_RTTI
// When building against STLport with the Android NDK and with
// -frtti -fno-exceptions, the build fails at link time with undefined
// references to __cxa_bad_typeid. Note sure if STL or toolchain bug,
// so disable RTTI when detected.
#   if GTEST_OS_LINUX_ANDROID && defined(_STLPORT_MAJOR) && \
       !defined(__EXCEPTIONS)
#    define GTEST_HAS_RTTI 0
#   else
#    define GTEST_HAS_RTTI 1
#   endif  // GTEST_OS_LINUX_ANDROID && __STLPORT_MAJOR && !__EXCEPTIONS
#  else
#   define GTEST_HAS_RTTI 0
#  endif  // __GXX_RTTI
 
// Clang defines __GXX_RTTI starting with version 3.0, but its manual recommends
// using has_feature instead. has_feature(cxx_rtti) is supported since 2.7, the
// first version with C++ support.
# elif defined(__clang__)
 
#  define GTEST_HAS_RTTI __has_feature(cxx_rtti)
 
// Starting with version 9.0 IBM Visual Age defines __RTTI_ALL__ to 1 if
// both the typeid and dynamic_cast features are present.
# elif defined(__IBMCPP__) && (__IBMCPP__ >= 900)
 
#  ifdef __RTTI_ALL__
#   define GTEST_HAS_RTTI 1
#  else
#   define GTEST_HAS_RTTI 0
#  endif
 
# else
 
// For all other compilers, we assume RTTI is enabled.
#  define GTEST_HAS_RTTI 1
 
# endif  // _MSC_VER
 
#endif  // GTEST_HAS_RTTI
 
// It's this header's responsibility to #include <typeinfo> when RTTI
// is enabled.
#if GTEST_HAS_RTTI
# include <typeinfo>
#endif
 
// Determines whether Google Test can use the pthreads library.
#ifndef GTEST_HAS_PTHREAD
// The user didn't tell us explicitly, so we make reasonable assumptions about
// which platforms have pthreads support.
//
// To disable threading support in Google Test, add -DGTEST_HAS_PTHREAD=0
// to your compiler flags.
# define GTEST_HAS_PTHREAD (GTEST_OS_LINUX || GTEST_OS_MAC || GTEST_OS_HPUX \
    || GTEST_OS_QNX || GTEST_OS_FREEBSD || GTEST_OS_NACL)
#endif  // GTEST_HAS_PTHREAD
 
#if GTEST_HAS_PTHREAD
// gtest-port.h guarantees to #include <pthread.h> when GTEST_HAS_PTHREAD is
// true.
# include <pthread.h>  // NOLINT
 
// For timespec and nanosleep, used below.
# include <time.h>  // NOLINT
#endif
 
// Determines if hash_map/hash_set are available.
// Only used for testing against those containers.
#if !defined(GTEST_HAS_HASH_MAP_)
# if _MSC_VER
#  define GTEST_HAS_HASH_MAP_ 1  // Indicates that hash_map is available.
#  define GTEST_HAS_HASH_SET_ 1  // Indicates that hash_set is available.
# endif  // _MSC_VER
#endif  // !defined(GTEST_HAS_HASH_MAP_)
 
// Determines whether Google Test can use tr1/tuple.  You can define
// this macro to 0 to prevent Google Test from using tuple (any
// feature depending on tuple with be disabled in this mode).
#ifndef GTEST_HAS_TR1_TUPLE
# if GTEST_OS_LINUX_ANDROID && defined(_STLPORT_MAJOR)
// STLport, provided with the Android NDK, has neither <tr1/tuple> or <tuple>.
#  define GTEST_HAS_TR1_TUPLE 0
# else
// The user didn't tell us not to do it, so we assume it's OK.
#  define GTEST_HAS_TR1_TUPLE 1
# endif
#endif  // GTEST_HAS_TR1_TUPLE
 
// Determines whether Google Test's own tr1 tuple implementation
// should be used.
#ifndef GTEST_USE_OWN_TR1_TUPLE
// The user didn't tell us, so we need to figure it out.
 
// We use our own TR1 tuple if we aren't sure the user has an
// implementation of it already.  At this time, libstdc++ 4.0.0+ and
// MSVC 2010 are the only mainstream standard libraries that come
// with a TR1 tuple implementation.  NVIDIA's CUDA NVCC compiler
// pretends to be GCC by defining __GNUC__ and friends, but cannot
// compile GCC's tuple implementation.  MSVC 2008 (9.0) provides TR1
// tuple in a 323 MB Feature Pack download, which we cannot assume the
// user has.  QNX's QCC compiler is a modified GCC but it doesn't
// support TR1 tuple.  libc++ only provides std::tuple, in C++11 mode,
// and it can be used with some compilers that define __GNUC__.
# if (defined(__GNUC__) && !defined(__CUDACC__) && (GTEST_GCC_VER_ >= 40000) \
      && !GTEST_OS_QNX && !defined(_LIBCPP_VERSION)) || _MSC_VER >= 1600
#  define GTEST_ENV_HAS_TR1_TUPLE_ 1
# endif
 
// C++11 specifies that <tuple> provides std::tuple. Use that if gtest is used
// in C++11 mode and libstdc++ isn't very old (binaries targeting OS X 10.6
// can build with clang but need to use gcc4.2's libstdc++).
# if GTEST_LANG_CXX11 && (!defined(__GLIBCXX__) || __GLIBCXX__ > 20110325)
#  define GTEST_ENV_HAS_STD_TUPLE_ 1
# endif
 
# if GTEST_ENV_HAS_TR1_TUPLE_ || GTEST_ENV_HAS_STD_TUPLE_
#  define GTEST_USE_OWN_TR1_TUPLE 0
# else
#  define GTEST_USE_OWN_TR1_TUPLE 1
# endif
 
#endif  // GTEST_USE_OWN_TR1_TUPLE
 
// To avoid conditional compilation everywhere, we make it
// gtest-port.h's responsibility to #include the header implementing
// tuple.
#if GTEST_HAS_STD_TUPLE_
# include <tuple>  // IWYU pragma: export
# define GTEST_TUPLE_NAMESPACE_ ::std
#endif  // GTEST_HAS_STD_TUPLE_
 
// We include tr1::tuple even if std::tuple is available to define printers for
// them.
#if GTEST_HAS_TR1_TUPLE
# ifndef GTEST_TUPLE_NAMESPACE_
#  define GTEST_TUPLE_NAMESPACE_ ::std::tr1
# endif  // GTEST_TUPLE_NAMESPACE_
 
# if GTEST_USE_OWN_TR1_TUPLE
#  include "gtest/internal/gtest-tuple.h"  // IWYU pragma: export  // NOLINT
# elif GTEST_ENV_HAS_STD_TUPLE_
#  include <tuple>
// C++11 puts its tuple into the ::std namespace rather than
// ::std::tr1.  gtest expects tuple to live in ::std::tr1, so put it there.
// This causes undefined behavior, but supported compilers react in
// the way we intend.
namespace std {
namespace tr1 {
using ::std::get;
using ::std::make_tuple;
using ::std::tuple;
using ::std::tuple_element;
using ::std::tuple_size;
}
}
 
# elif GTEST_OS_SYMBIAN
 
// On Symbian, BOOST_HAS_TR1_TUPLE causes Boost's TR1 tuple library to
// use STLport's tuple implementation, which unfortunately doesn't
// work as the copy of STLport distributed with Symbian is incomplete.
// By making sure BOOST_HAS_TR1_TUPLE is undefined, we force Boost to
// use its own tuple implementation.
#  ifdef BOOST_HAS_TR1_TUPLE
#   undef BOOST_HAS_TR1_TUPLE
#  endif  // BOOST_HAS_TR1_TUPLE
 
// This prevents <boost/tr1/detail/config.hpp>, which defines
// BOOST_HAS_TR1_TUPLE, from being #included by Boost's <tuple>.
#  define BOOST_TR1_DETAIL_CONFIG_HPP_INCLUDED
#  include <tuple>  // IWYU pragma: export  // NOLINT
 
# elif defined(__GNUC__) && (GTEST_GCC_VER_ >= 40000)
// GCC 4.0+ implements tr1/tuple in the <tr1/tuple> header.  This does
// not conform to the TR1 spec, which requires the header to be <tuple>.
 
#  if !GTEST_HAS_RTTI && GTEST_GCC_VER_ < 40302
// Until version 4.3.2, gcc has a bug that causes <tr1/functional>,
// which is #included by <tr1/tuple>, to not compile when RTTI is
// disabled.  _TR1_FUNCTIONAL is the header guard for
// <tr1/functional>.  Hence the following #define is a hack to prevent
// <tr1/functional> from being included.
#   define _TR1_FUNCTIONAL 1
#   include <tr1/tuple>
#   undef _TR1_FUNCTIONAL  // Allows the user to #include
                        // <tr1/functional> if he chooses to.
#  else
#   include <tr1/tuple>  // NOLINT
#  endif  // !GTEST_HAS_RTTI && GTEST_GCC_VER_ < 40302
 
# else
// If the compiler is not GCC 4.0+, we assume the user is using a
// spec-conforming TR1 implementation.
#  include <tuple>  // IWYU pragma: export  // NOLINT
# endif  // GTEST_USE_OWN_TR1_TUPLE
 
#endif  // GTEST_HAS_TR1_TUPLE
 
// Determines whether clone(2) is supported.
// Usually it will only be available on Linux, excluding
// Linux on the Itanium architecture.
// Also see http://linux.die.net/man/2/clone.
#ifndef GTEST_HAS_CLONE
// The user didn't tell us, so we need to figure it out.
 
# if GTEST_OS_LINUX && !defined(__ia64__)
#  if GTEST_OS_LINUX_ANDROID
// On Android, clone() is only available on ARM starting with Gingerbread.
#    if defined(__arm__) && __ANDROID_API__ >= 9
#     define GTEST_HAS_CLONE 1
#    else
#     define GTEST_HAS_CLONE 0
#    endif
#  else
#   define GTEST_HAS_CLONE 1
#  endif
# else
#  define GTEST_HAS_CLONE 0
# endif  // GTEST_OS_LINUX && !defined(__ia64__)
 
#endif  // GTEST_HAS_CLONE
 
// Determines whether to support stream redirection. This is used to test
// output correctness and to implement death tests.
#ifndef GTEST_HAS_STREAM_REDIRECTION
// By default, we assume that stream redirection is supported on all
// platforms except known mobile ones.
# if GTEST_OS_WINDOWS_MOBILE || GTEST_OS_SYMBIAN || \
    GTEST_OS_WINDOWS_PHONE || GTEST_OS_WINDOWS_RT
#  define GTEST_HAS_STREAM_REDIRECTION 0
# else
#  define GTEST_HAS_STREAM_REDIRECTION 1
# endif  // !GTEST_OS_WINDOWS_MOBILE && !GTEST_OS_SYMBIAN
#endif  // GTEST_HAS_STREAM_REDIRECTION
 
// Determines whether to support death tests.
// Google Test does not support death tests for VC 7.1 and earlier as
// abort() in a VC 7.1 application compiled as GUI in debug config
// pops up a dialog window that cannot be suppressed programmatically.
#if (GTEST_OS_LINUX || GTEST_OS_CYGWIN || GTEST_OS_SOLARIS || \
     (GTEST_OS_MAC && !GTEST_OS_IOS) || \
     (GTEST_OS_WINDOWS_DESKTOP && _MSC_VER >= 1400) || \
     GTEST_OS_WINDOWS_MINGW || GTEST_OS_AIX || GTEST_OS_HPUX || \
     GTEST_OS_OPENBSD || GTEST_OS_QNX || GTEST_OS_FREEBSD)
# define GTEST_HAS_DEATH_TEST 1
#endif
 
// We don't support MSVC 7.1 with exceptions disabled now.  Therefore
// all the compilers we care about are adequate for supporting
// value-parameterized tests.
#define GTEST_HAS_PARAM_TEST 1
 
// Determines whether to support type-driven tests.
 
// Typed tests need <typeinfo> and variadic macros, which GCC, VC++ 8.0,
// Sun Pro CC, IBM Visual Age, and HP aCC support.
#if defined(__GNUC__) || (_MSC_VER >= 1400) || defined(__SUNPRO_CC) || \
    defined(__IBMCPP__) || defined(__HP_aCC)
# define GTEST_HAS_TYPED_TEST 1
# define GTEST_HAS_TYPED_TEST_P 1
#endif
 
// Determines whether to support Combine(). This only makes sense when
// value-parameterized tests are enabled.  The implementation doesn't
// work on Sun Studio since it doesn't understand templated conversion
// operators.
#if GTEST_HAS_PARAM_TEST && GTEST_HAS_TR1_TUPLE && !defined(__SUNPRO_CC)
# define GTEST_HAS_COMBINE 1
#endif
 
// Determines whether the system compiler uses UTF-16 for encoding wide strings.
#define GTEST_WIDE_STRING_USES_UTF16_ \
    (GTEST_OS_WINDOWS || GTEST_OS_CYGWIN || GTEST_OS_SYMBIAN || GTEST_OS_AIX)
 
// Determines whether test results can be streamed to a socket.
#if GTEST_OS_LINUX
# define GTEST_CAN_STREAM_RESULTS_ 1
#endif
 
// Defines some utility macros.
 
// The GNU compiler emits a warning if nested "if" statements are followed by
// an "else" statement and braces are not used to explicitly disambiguate the
// "else" binding.  This leads to problems with code like:
//
//   if (gate)
//     ASSERT_*(condition) << "Some message";
//
// The "switch (0) case 0:" idiom is used to suppress this.
#ifdef __INTEL_COMPILER
# define GTEST_AMBIGUOUS_ELSE_BLOCKER_
#else
# define GTEST_AMBIGUOUS_ELSE_BLOCKER_ switch (0) case 0: default:  // NOLINT
#endif
 
// Use this annotation at the end of a struct/class definition to
// prevent the compiler from optimizing away instances that are never
// used.  This is useful when all interesting logic happens inside the
// c'tor and / or d'tor.  Example:
//
//   struct Foo {
//     Foo() { ... }
//   } GTEST_ATTRIBUTE_UNUSED_;
//
// Also use it after a variable or parameter declaration to tell the
// compiler the variable/parameter does not have to be used.
#if defined(__GNUC__) && !defined(COMPILER_ICC)
# define GTEST_ATTRIBUTE_UNUSED_ __attribute__ ((unused))
#elif defined(__clang__)
# if __has_attribute(unused)
#  define GTEST_ATTRIBUTE_UNUSED_ __attribute__ ((unused))
# endif
#endif
#ifndef GTEST_ATTRIBUTE_UNUSED_
# define GTEST_ATTRIBUTE_UNUSED_
#endif
 
// A macro to disallow operator=
// This should be used in the private: declarations for a class.
#define GTEST_DISALLOW_ASSIGN_(type)\
  void operator=(type const &)
 
// A macro to disallow copy constructor and operator=
// This should be used in the private: declarations for a class.
#define GTEST_DISALLOW_COPY_AND_ASSIGN_(type)\
  type(type const &);\
  GTEST_DISALLOW_ASSIGN_(type)
 
// Tell the compiler to warn about unused return values for functions declared
// with this macro.  The macro should be used on function declarations
// following the argument list:
//
//   Sprocket* AllocateSprocket() GTEST_MUST_USE_RESULT_;
#if defined(__GNUC__) && (GTEST_GCC_VER_ >= 30400) && !defined(COMPILER_ICC)
# define GTEST_MUST_USE_RESULT_ __attribute__ ((warn_unused_result))
#else
# define GTEST_MUST_USE_RESULT_
#endif  // __GNUC__ && (GTEST_GCC_VER_ >= 30400) && !COMPILER_ICC
 
// MS C++ compiler emits warning when a conditional expression is compile time
// constant. In some contexts this warning is false positive and needs to be
// suppressed. Use the following two macros in such cases:
//
// GTEST_INTENTIONAL_CONST_COND_PUSH_()
// while (true) {
// GTEST_INTENTIONAL_CONST_COND_POP_()
// }
# define GTEST_INTENTIONAL_CONST_COND_PUSH_() \
    GTEST_DISABLE_MSC_WARNINGS_PUSH_(4127)
# define GTEST_INTENTIONAL_CONST_COND_POP_() \
    GTEST_DISABLE_MSC_WARNINGS_POP_()
 
// Determine whether the compiler supports Microsoft's Structured Exception
// Handling.  This is supported by several Windows compilers but generally
// does not exist on any other system.
#ifndef GTEST_HAS_SEH
// The user didn't tell us, so we need to figure it out.
 
# if defined(_MSC_VER) || defined(__BORLANDC__)
// These two compilers are known to support SEH.
#  define GTEST_HAS_SEH 1
# else
// Assume no SEH.
#  define GTEST_HAS_SEH 0
# endif
 
#define GTEST_IS_THREADSAFE \
    (GTEST_HAS_MUTEX_AND_THREAD_LOCAL_ \
     || (GTEST_OS_WINDOWS && !GTEST_OS_WINDOWS_PHONE && !GTEST_OS_WINDOWS_RT) \
     || GTEST_HAS_PTHREAD)
 
#endif  // GTEST_HAS_SEH
 
#ifdef _MSC_VER
# if GTEST_LINKED_AS_SHARED_LIBRARY
#  define GTEST_API_ __declspec(dllimport)
# elif GTEST_CREATE_SHARED_LIBRARY
#  define GTEST_API_ __declspec(dllexport)
# endif
#elif __GNUC__ >= 4 || defined(__clang__)
# define GTEST_API_ __attribute__((visibility ("default")))
#endif // _MSC_VER
 
#ifndef GTEST_API_
# define GTEST_API_
#endif
 
#ifdef __GNUC__
// Ask the compiler to never inline a given function.
# define GTEST_NO_INLINE_ __attribute__((noinline))
#else
# define GTEST_NO_INLINE_
#endif
 
// _LIBCPP_VERSION is defined by the libc++ library from the LLVM project.
#if defined(__GLIBCXX__) || defined(_LIBCPP_VERSION)
# define GTEST_HAS_CXXABI_H_ 1
#else
# define GTEST_HAS_CXXABI_H_ 0
#endif
 
// A function level attribute to disable checking for use of uninitialized
// memory when built with MemorySanitizer.
#if defined(__clang__)
# if __has_feature(memory_sanitizer)
#  define GTEST_ATTRIBUTE_NO_SANITIZE_MEMORY_ \
       __attribute__((no_sanitize_memory))
# else
#  define GTEST_ATTRIBUTE_NO_SANITIZE_MEMORY_
# endif  // __has_feature(memory_sanitizer)
#else
# define GTEST_ATTRIBUTE_NO_SANITIZE_MEMORY_
#endif  // __clang__
 
// A function level attribute to disable AddressSanitizer instrumentation.
#if defined(__clang__)
# if __has_feature(address_sanitizer)
#  define GTEST_ATTRIBUTE_NO_SANITIZE_ADDRESS_ \
       __attribute__((no_sanitize_address))
# else
#  define GTEST_ATTRIBUTE_NO_SANITIZE_ADDRESS_
# endif  // __has_feature(address_sanitizer)
#else
# define GTEST_ATTRIBUTE_NO_SANITIZE_ADDRESS_
#endif  // __clang__
 
// A function level attribute to disable ThreadSanitizer instrumentation.
#if defined(__clang__)
# if __has_feature(thread_sanitizer)
#  define GTEST_ATTRIBUTE_NO_SANITIZE_THREAD_ \
       __attribute__((no_sanitize_thread))
# else
#  define GTEST_ATTRIBUTE_NO_SANITIZE_THREAD_
# endif  // __has_feature(thread_sanitizer)
#else
# define GTEST_ATTRIBUTE_NO_SANITIZE_THREAD_
#endif  // __clang__
 
namespace testing {
 
class Message;
 
#if defined(GTEST_TUPLE_NAMESPACE_)
// Import tuple and friends into the ::testing namespace.
// It is part of our interface, having them in ::testing allows us to change
// their types as needed.
using GTEST_TUPLE_NAMESPACE_::get;
using GTEST_TUPLE_NAMESPACE_::make_tuple;
using GTEST_TUPLE_NAMESPACE_::tuple;
using GTEST_TUPLE_NAMESPACE_::tuple_size;
using GTEST_TUPLE_NAMESPACE_::tuple_element;
#endif  // defined(GTEST_TUPLE_NAMESPACE_)
 
namespace internal {
 
// A secret type that Google Test users don't know about.  It has no
// definition on purpose.  Therefore it's impossible to create a
// Secret object, which is what we want.
class Secret;
 
// The GTEST_COMPILE_ASSERT_ macro can be used to verify that a compile time
// expression is true. For example, you could use it to verify the
// size of a static array:
//
//   GTEST_COMPILE_ASSERT_(GTEST_ARRAY_SIZE_(names) == NUM_NAMES,
//                         names_incorrect_size);
//
// or to make sure a struct is smaller than a certain size:
//
//   GTEST_COMPILE_ASSERT_(sizeof(foo) < 128, foo_too_large);
//
// The second argument to the macro is the name of the variable. If
// the expression is false, most compilers will issue a warning/error
// containing the name of the variable.
 
#if GTEST_LANG_CXX11
# define GTEST_COMPILE_ASSERT_(expr, msg) static_assert(expr, #msg)
#else  // !GTEST_LANG_CXX11
template <bool>
  struct CompileAssert {
};
 
# define GTEST_COMPILE_ASSERT_(expr, msg) \
  typedef ::testing::internal::CompileAssert<(static_cast<bool>(expr))> \
      msg[static_cast<bool>(expr) ? 1 : -1] GTEST_ATTRIBUTE_UNUSED_
#endif  // !GTEST_LANG_CXX11
 
// Implementation details of GTEST_COMPILE_ASSERT_:
//
// (In C++11, we simply use static_assert instead of the following)
//
// - GTEST_COMPILE_ASSERT_ works by defining an array type that has -1
//   elements (and thus is invalid) when the expression is false.
//
// - The simpler definition
//
//    #define GTEST_COMPILE_ASSERT_(expr, msg) typedef char msg[(expr) ? 1 : -1]
//
//   does not work, as gcc supports variable-length arrays whose sizes
//   are determined at run-time (this is gcc's extension and not part
//   of the C++ standard).  As a result, gcc fails to reject the
//   following code with the simple definition:
//
//     int foo;
//     GTEST_COMPILE_ASSERT_(foo, msg); // not supposed to compile as foo is
//                                      // not a compile-time constant.
//
// - By using the type CompileAssert<(bool(expr))>, we ensures that
//   expr is a compile-time constant.  (Template arguments must be
//   determined at compile-time.)
//
// - The outter parentheses in CompileAssert<(bool(expr))> are necessary
//   to work around a bug in gcc 3.4.4 and 4.0.1.  If we had written
//
//     CompileAssert<bool(expr)>
//
//   instead, these compilers will refuse to compile
//
//     GTEST_COMPILE_ASSERT_(5 > 0, some_message);
//
//   (They seem to think the ">" in "5 > 0" marks the end of the
//   template argument list.)
//
// - The array size is (bool(expr) ? 1 : -1), instead of simply
//
//     ((expr) ? 1 : -1).
//
//   This is to avoid running into a bug in MS VC 7.1, which
//   causes ((0.0) ? 1 : -1) to incorrectly evaluate to 1.
 
// StaticAssertTypeEqHelper is used by StaticAssertTypeEq defined in gtest.h.
//
// This template is declared, but intentionally undefined.
template <typename T1, typename T2>
struct StaticAssertTypeEqHelper;
 
template <typename T>
struct StaticAssertTypeEqHelper<T, T> {
  enum { value = true };
};
 
// Evaluates to the number of elements in 'array'.
#define GTEST_ARRAY_SIZE_(array) (sizeof(array) / sizeof(array[0]))
 
#if GTEST_HAS_GLOBAL_STRING
typedef ::string string;
#else
typedef ::std::string string;
#endif  // GTEST_HAS_GLOBAL_STRING
 
#if GTEST_HAS_GLOBAL_WSTRING
typedef ::wstring wstring;
#elif GTEST_HAS_STD_WSTRING
typedef ::std::wstring wstring;
#endif  // GTEST_HAS_GLOBAL_WSTRING
 
// A helper for suppressing warnings on constant condition.  It just
// returns 'condition'.
GTEST_API_ bool IsTrue(bool condition);
 
// Defines scoped_ptr.
 
// This implementation of scoped_ptr is PARTIAL - it only contains
// enough stuff to satisfy Google Test's need.
template <typename T>
class scoped_ptr {
 public:
  typedef T element_type;
 
  explicit scoped_ptr(T* p = NULL) : ptr_(p) {}
  ~scoped_ptr() { reset(); }
 
  T& operator*() const { return *ptr_; }
  T* operator->() const { return ptr_; }
  T* get() const { return ptr_; }
 
  T* release() {
    T* const ptr = ptr_;
    ptr_ = NULL;
    return ptr;
  }
 
  void reset(T* p = NULL) {
    if (p != ptr_) {
      if (IsTrue(sizeof(T) > 0)) {  // Makes sure T is a complete type.
        delete ptr_;
      }
      ptr_ = p;
    }
  }
 
  friend void swap(scoped_ptr& a, scoped_ptr& b) {
    using std::swap;
    swap(a.ptr_, b.ptr_);
  }
 
 private:
  T* ptr_;
 
  GTEST_DISALLOW_COPY_AND_ASSIGN_(scoped_ptr);
};
 
// Defines RE.
 
// A simple C++ wrapper for <regex.h>.  It uses the POSIX Extended
// Regular Expression syntax.
class GTEST_API_ RE {
 public:
  // A copy constructor is required by the Standard to initialize object
  // references from r-values.
  RE(const RE& other) { Init(other.pattern()); }
 
  // Constructs an RE from a string.
  RE(const ::std::string& regex) { Init(regex.c_str()); }  // NOLINT
 
#if GTEST_HAS_GLOBAL_STRING
 
  RE(const ::string& regex) { Init(regex.c_str()); }  // NOLINT
 
#endif  // GTEST_HAS_GLOBAL_STRING
 
  RE(const char* regex) { Init(regex); }  // NOLINT
  ~RE();
 
  // Returns the string representation of the regex.
  const char* pattern() const { return pattern_; }
 
  // FullMatch(str, re) returns true iff regular expression re matches
  // the entire str.
  // PartialMatch(str, re) returns true iff regular expression re
  // matches a substring of str (including str itself).
  //
  // TODO(wan@google.com): make FullMatch() and PartialMatch() work
  // when str contains NUL characters.
  static bool FullMatch(const ::std::string& str, const RE& re) {
    return FullMatch(str.c_str(), re);
  }
  static bool PartialMatch(const ::std::string& str, const RE& re) {
    return PartialMatch(str.c_str(), re);
  }
 
#if GTEST_HAS_GLOBAL_STRING
 
  static bool FullMatch(const ::string& str, const RE& re) {
    return FullMatch(str.c_str(), re);
  }
  static bool PartialMatch(const ::string& str, const RE& re) {
    return PartialMatch(str.c_str(), re);
  }
 
#endif  // GTEST_HAS_GLOBAL_STRING
 
  static bool FullMatch(const char* str, const RE& re);
  static bool PartialMatch(const char* str, const RE& re);
 
 private:
  void Init(const char* regex);
 
  // We use a const char* instead of an std::string, as Google Test used to be
  // used where std::string is not available.  TODO(wan@google.com): change to
  // std::string.
  const char* pattern_;
  bool is_valid_;
 
#if GTEST_USES_POSIX_RE
 
  regex_t full_regex_;     // For FullMatch().
  regex_t partial_regex_;  // For PartialMatch().
 
#else  // GTEST_USES_SIMPLE_RE
 
  const char* full_pattern_;  // For FullMatch();
 
#endif
 
  GTEST_DISALLOW_ASSIGN_(RE);
};
 
// Formats a source file path and a line number as they would appear
// in an error message from the compiler used to compile this code.
GTEST_API_ ::std::string FormatFileLocation(const char* file, int line);
 
// Formats a file location for compiler-independent XML output.
// Although this function is not platform dependent, we put it next to
// FormatFileLocation in order to contrast the two functions.
GTEST_API_ ::std::string FormatCompilerIndependentFileLocation(const char* file,
                                                               int line);
 
// Defines logging utilities:
//   GTEST_LOG_(severity) - logs messages at the specified severity level. The
//                          message itself is streamed into the macro.
//   LogToStderr()  - directs all log messages to stderr.
//   FlushInfoLog() - flushes informational log messages.
 
enum GTestLogSeverity {
  GTEST_INFO,
  GTEST_WARNING,
  GTEST_ERROR,
  GTEST_FATAL
};
 
// Formats log entry severity, provides a stream object for streaming the
// log message, and terminates the message with a newline when going out of
// scope.
class GTEST_API_ GTestLog {
 public:
  GTestLog(GTestLogSeverity severity, const char* file, int line);
 
  // Flushes the buffers and, if severity is GTEST_FATAL, aborts the program.
  ~GTestLog();
 
  ::std::ostream& GetStream() { return ::std::cerr; }
 
 private:
  const GTestLogSeverity severity_;
 
  GTEST_DISALLOW_COPY_AND_ASSIGN_(GTestLog);
};
 
#if !defined(GTEST_LOG_)
 
# define GTEST_LOG_(severity) \
    ::testing::internal::GTestLog(::testing::internal::GTEST_##severity, \
                                  __FILE__, __LINE__).GetStream()
 
inline void LogToStderr() {}
inline void FlushInfoLog() { fflush(NULL); }
 
#endif  // !defined(GTEST_LOG_)
 
#if !defined(GTEST_CHECK_)
// INTERNAL IMPLEMENTATION - DO NOT USE.
//
// GTEST_CHECK_ is an all-mode assert. It aborts the program if the condition
// is not satisfied.
//  Synopsys:
//    GTEST_CHECK_(boolean_condition);
//     or
//    GTEST_CHECK_(boolean_condition) << "Additional message";
//
//    This checks the condition and if the condition is not satisfied
//    it prints message about the condition violation, including the
//    condition itself, plus additional message streamed into it, if any,
//    and then it aborts the program. It aborts the program irrespective of
//    whether it is built in the debug mode or not.
# define GTEST_CHECK_(condition) \
    GTEST_AMBIGUOUS_ELSE_BLOCKER_ \
    if (::testing::internal::IsTrue(condition)) \
      ; \
    else \
      GTEST_LOG_(FATAL) << "Condition " #condition " failed. "
#endif  // !defined(GTEST_CHECK_)
 
// An all-mode assert to verify that the given POSIX-style function
// call returns 0 (indicating success).  Known limitation: this
// doesn't expand to a balanced 'if' statement, so enclose the macro
// in {} if you need to use it as the only statement in an 'if'
// branch.
#define GTEST_CHECK_POSIX_SUCCESS_(posix_call) \
  if (const int gtest_error = (posix_call)) \
    GTEST_LOG_(FATAL) << #posix_call << "failed with error " \
                      << gtest_error
 
#if GTEST_HAS_STD_MOVE_
using std::move;
#else  // GTEST_HAS_STD_MOVE_
template <typename T>
const T& move(const T& t) {
  return t;
}
#endif  // GTEST_HAS_STD_MOVE_
 
// INTERNAL IMPLEMENTATION - DO NOT USE IN USER CODE.
//
// Use ImplicitCast_ as a safe version of static_cast for upcasting in
// the type hierarchy (e.g. casting a Foo* to a SuperclassOfFoo* or a
// const Foo*).  When you use ImplicitCast_, the compiler checks that
// the cast is safe.  Such explicit ImplicitCast_s are necessary in
// surprisingly many situations where C++ demands an exact type match
// instead of an argument type convertable to a target type.
//
// The syntax for using ImplicitCast_ is the same as for static_cast:
//
//   ImplicitCast_<ToType>(expr)
//
// ImplicitCast_ would have been part of the C++ standard library,
// but the proposal was submitted too late.  It will probably make
// its way into the language in the future.
//
// This relatively ugly name is intentional. It prevents clashes with
// similar functions users may have (e.g., implicit_cast). The internal
// namespace alone is not enough because the function can be found by ADL.
template<typename To>
inline To ImplicitCast_(To x) { return x; }
 
// When you upcast (that is, cast a pointer from type Foo to type
// SuperclassOfFoo), it's fine to use ImplicitCast_<>, since upcasts
// always succeed.  When you downcast (that is, cast a pointer from
// type Foo to type SubclassOfFoo), static_cast<> isn't safe, because
// how do you know the pointer is really of type SubclassOfFoo?  It
// could be a bare Foo, or of type DifferentSubclassOfFoo.  Thus,
// when you downcast, you should use this macro.  In debug mode, we
// use dynamic_cast<> to double-check the downcast is legal (we die
// if it's not).  In normal mode, we do the efficient static_cast<>
// instead.  Thus, it's important to test in debug mode to make sure
// the cast is legal!
//    This is the only place in the code we should use dynamic_cast<>.
// In particular, you SHOULDN'T be using dynamic_cast<> in order to
// do RTTI (eg code like this:
//    if (dynamic_cast<Subclass1>(foo)) HandleASubclass1Object(foo);
//    if (dynamic_cast<Subclass2>(foo)) HandleASubclass2Object(foo);
// You should design the code some other way not to need this.
//
// This relatively ugly name is intentional. It prevents clashes with
// similar functions users may have (e.g., down_cast). The internal
// namespace alone is not enough because the function can be found by ADL.
template<typename To, typename From>  // use like this: DownCast_<T*>(foo);
inline To DownCast_(From* f) {  // so we only accept pointers
  // Ensures that To is a sub-type of From *.  This test is here only
  // for compile-time type checking, and has no overhead in an
  // optimized build at run-time, as it will be optimized away
  // completely.
  GTEST_INTENTIONAL_CONST_COND_PUSH_()
  if (false) {
  GTEST_INTENTIONAL_CONST_COND_POP_()
    const To to = NULL;
    ::testing::internal::ImplicitCast_<From*>(to);
  }
 
#if GTEST_HAS_RTTI
  // RTTI: debug mode only!
  GTEST_CHECK_(f == NULL || dynamic_cast<To>(f) != NULL);
#endif
  return static_cast<To>(f);
}
 
// Downcasts the pointer of type Base to Derived.
// Derived must be a subclass of Base. The parameter MUST
// point to a class of type Derived, not any subclass of it.
// When RTTI is available, the function performs a runtime
// check to enforce this.
template <class Derived, class Base>
Derived* CheckedDowncastToActualType(Base* base) {
#if GTEST_HAS_RTTI
  GTEST_CHECK_(typeid(*base) == typeid(Derived));
#endif
 
#if GTEST_HAS_DOWNCAST_
  return ::down_cast<Derived*>(base);
#elif GTEST_HAS_RTTI
  return dynamic_cast<Derived*>(base);  // NOLINT
#else
  return static_cast<Derived*>(base);  // Poor man's downcast.
#endif
}
 
#if GTEST_HAS_STREAM_REDIRECTION
 
// Defines the stderr capturer:
//   CaptureStdout     - starts capturing stdout.
//   GetCapturedStdout - stops capturing stdout and returns the captured string.
//   CaptureStderr     - starts capturing stderr.
//   GetCapturedStderr - stops capturing stderr and returns the captured string.
//
GTEST_API_ void CaptureStdout();
GTEST_API_ std::string GetCapturedStdout();
GTEST_API_ void CaptureStderr();
GTEST_API_ std::string GetCapturedStderr();
 
#endif  // GTEST_HAS_STREAM_REDIRECTION
 
// Returns a path to temporary directory.
GTEST_API_ std::string TempDir();
 
// Returns the size (in bytes) of a file.
GTEST_API_ size_t GetFileSize(FILE* file);
 
// Reads the entire content of a file as a string.
GTEST_API_ std::string ReadEntireFile(FILE* file);
 
// All command line arguments.
GTEST_API_ const ::std::vector<testing::internal::string>& GetArgvs();
 
#if GTEST_HAS_DEATH_TEST
 
const ::std::vector<testing::internal::string>& GetInjectableArgvs();
void SetInjectableArgvs(const ::std::vector<testing::internal::string>*
                             new_argvs);
 
 
#endif  // GTEST_HAS_DEATH_TEST
 
// Defines synchronization primitives.
#if GTEST_IS_THREADSAFE
# if GTEST_HAS_PTHREAD
// Sleeps for (roughly) n milliseconds.  This function is only for testing
// Google Test's own constructs.  Don't use it in user tests, either
// directly or indirectly.
inline void SleepMilliseconds(int n) {
  const timespec time = {
    0,                  // 0 seconds.
    n * 1000L * 1000L,  // And n ms.
  };
  nanosleep(&time, NULL);
}
# endif  // GTEST_HAS_PTHREAD
 
# if GTEST_HAS_NOTIFICATION_
// Notification has already been imported into the namespace.
// Nothing to do here.
 
# elif GTEST_HAS_PTHREAD
// Allows a controller thread to pause execution of newly created
// threads until notified.  Instances of this class must be created
// and destroyed in the controller thread.
//
// This class is only for testing Google Test's own constructs. Do not
// use it in user tests, either directly or indirectly.
class Notification {
 public:
  Notification() : notified_(false) {
    GTEST_CHECK_POSIX_SUCCESS_(pthread_mutex_init(&mutex_, NULL));
  }
  ~Notification() {
    pthread_mutex_destroy(&mutex_);
  }
 
  // Notifies all threads created with this notification to start. Must
  // be called from the controller thread.
  void Notify() {
    pthread_mutex_lock(&mutex_);
    notified_ = true;
    pthread_mutex_unlock(&mutex_);
  }
 
  // Blocks until the controller thread notifies. Must be called from a test
  // thread.
  void WaitForNotification() {
    for (;;) {
      pthread_mutex_lock(&mutex_);
      const bool notified = notified_;
      pthread_mutex_unlock(&mutex_);
      if (notified)
        break;
      SleepMilliseconds(10);
    }
  }
 
 private:
  pthread_mutex_t mutex_;
  bool notified_;
 
  GTEST_DISALLOW_COPY_AND_ASSIGN_(Notification);
};
 
# elif GTEST_OS_WINDOWS && !GTEST_OS_WINDOWS_PHONE && !GTEST_OS_WINDOWS_RT
 
GTEST_API_ void SleepMilliseconds(int n);
 
// Provides leak-safe Windows kernel handle ownership.
// Used in death tests and in threading support.
class GTEST_API_ AutoHandle {
 public:
  // Assume that Win32 HANDLE type is equivalent to void*. Doing so allows us to
  // avoid including <windows.h> in this header file. Including <windows.h> is
  // undesirable because it defines a lot of symbols and macros that tend to
  // conflict with client code. This assumption is verified by
  // WindowsTypesTest.HANDLEIsVoidStar.
  typedef void* Handle;
  AutoHandle();
  explicit AutoHandle(Handle handle);
 
  ~AutoHandle();
 
  Handle Get() const;
  void Reset();
  void Reset(Handle handle);
 
 private:
  // Returns true iff the handle is a valid handle object that can be closed.
  bool IsCloseable() const;
 
  Handle handle_;
 
  GTEST_DISALLOW_COPY_AND_ASSIGN_(AutoHandle);
};
 
// Allows a controller thread to pause execution of newly created
// threads until notified.  Instances of this class must be created
// and destroyed in the controller thread.
//
// This class is only for testing Google Test's own constructs. Do not
// use it in user tests, either directly or indirectly.
class GTEST_API_ Notification {
 public:
  Notification();
  void Notify();
  void WaitForNotification();
 
 private:
  AutoHandle event_;
 
  GTEST_DISALLOW_COPY_AND_ASSIGN_(Notification);
};
# endif  // GTEST_HAS_NOTIFICATION_
 
// On MinGW, we can have both GTEST_OS_WINDOWS and GTEST_HAS_PTHREAD
// defined, but we don't want to use MinGW's pthreads implementation, which
// has conformance problems with some versions of the POSIX standard.
# if GTEST_HAS_PTHREAD && !GTEST_OS_WINDOWS_MINGW
 
// As a C-function, ThreadFuncWithCLinkage cannot be templated itself.
// Consequently, it cannot select a correct instantiation of ThreadWithParam
// in order to call its Run(). Introducing ThreadWithParamBase as a
// non-templated base class for ThreadWithParam allows us to bypass this
// problem.
class ThreadWithParamBase {
 public:
  virtual ~ThreadWithParamBase() {}
  virtual void Run() = 0;
};
 
// pthread_create() accepts a pointer to a function type with the C linkage.
// According to the Standard (7.5/1), function types with different linkages
// are different even if they are otherwise identical.  Some compilers (for
// example, SunStudio) treat them as different types.  Since class methods
// cannot be defined with C-linkage we need to define a free C-function to
// pass into pthread_create().
extern "C" inline void* ThreadFuncWithCLinkage(void* thread) {
  static_cast<ThreadWithParamBase*>(thread)->Run();
  return NULL;
}
 
// Helper class for testing Google Test's multi-threading constructs.
// To use it, write:
//
//   void ThreadFunc(int param) { /* Do things with param */ }
//   Notification thread_can_start;
//   ...
//   // The thread_can_start parameter is optional; you can supply NULL.
//   ThreadWithParam<int> thread(&ThreadFunc, 5, &thread_can_start);
//   thread_can_start.Notify();
//
// These classes are only for testing Google Test's own constructs. Do
// not use them in user tests, either directly or indirectly.
template <typename T>
class ThreadWithParam : public ThreadWithParamBase {
 public:
  typedef void UserThreadFunc(T);
 
  ThreadWithParam(UserThreadFunc* func, T param, Notification* thread_can_start)
      : func_(func),
        param_(param),
        thread_can_start_(thread_can_start),
        finished_(false) {
    ThreadWithParamBase* const base = this;
    // The thread can be created only after all fields except thread_
    // have been initialized.
    GTEST_CHECK_POSIX_SUCCESS_(
        pthread_create(&thread_, 0, &ThreadFuncWithCLinkage, base));
  }
  ~ThreadWithParam() { Join(); }
 
  void Join() {
    if (!finished_) {
      GTEST_CHECK_POSIX_SUCCESS_(pthread_join(thread_, 0));
      finished_ = true;
    }
  }
 
  virtual void Run() {
    if (thread_can_start_ != NULL)
      thread_can_start_->WaitForNotification();
    func_(param_);
  }
 
 private:
  UserThreadFunc* const func_;  // User-supplied thread function.
  const T param_;  // User-supplied parameter to the thread function.
  // When non-NULL, used to block execution until the controller thread
  // notifies.
  Notification* const thread_can_start_;
  bool finished_;  // true iff we know that the thread function has finished.
  pthread_t thread_;  // The native thread object.
 
  GTEST_DISALLOW_COPY_AND_ASSIGN_(ThreadWithParam);
};
# endif  // !GTEST_OS_WINDOWS && GTEST_HAS_PTHREAD ||
         // GTEST_HAS_MUTEX_AND_THREAD_LOCAL_
 
# if GTEST_HAS_MUTEX_AND_THREAD_LOCAL_
// Mutex and ThreadLocal have already been imported into the namespace.
// Nothing to do here.
 
# elif GTEST_OS_WINDOWS && !GTEST_OS_WINDOWS_PHONE && !GTEST_OS_WINDOWS_RT
 
// Mutex implements mutex on Windows platforms.  It is used in conjunction
// with class MutexLock:
//
//   Mutex mutex;
//   ...
//   MutexLock lock(&mutex);  // Acquires the mutex and releases it at the
//                            // end of the current scope.
//
// A static Mutex *must* be defined or declared using one of the following
// macros:
//   GTEST_DEFINE_STATIC_MUTEX_(g_some_mutex);
//   GTEST_DECLARE_STATIC_MUTEX_(g_some_mutex);
//
// (A non-static Mutex is defined/declared in the usual way).
class GTEST_API_ Mutex {
 public:
  enum MutexType { kStatic = 0, kDynamic = 1 };
  // We rely on kStaticMutex being 0 as it is to what the linker initializes
  // type_ in static mutexes.  critical_section_ will be initialized lazily
  // in ThreadSafeLazyInit().
  enum StaticConstructorSelector { kStaticMutex = 0 };
 
  // This constructor intentionally does nothing.  It relies on type_ being
  // statically initialized to 0 (effectively setting it to kStatic) and on
  // ThreadSafeLazyInit() to lazily initialize the rest of the members.
  explicit Mutex(StaticConstructorSelector /*dummy*/) {}
 
  Mutex();
  ~Mutex();
 
  void Lock();
 
  void Unlock();
 
  // Does nothing if the current thread holds the mutex. Otherwise, crashes
  // with high probability.
  void AssertHeld();
 
 private:
  // Initializes owner_thread_id_ and critical_section_ in static mutexes.
  void ThreadSafeLazyInit();
 
  // Per http://blogs.msdn.com/b/oldnewthing/archive/2004/02/23/78395.aspx,
  // we assume that 0 is an invalid value for thread IDs.
  unsigned int owner_thread_id_;
 
  // For static mutexes, we rely on these members being initialized to zeros
  // by the linker.
  MutexType type_;
  long critical_section_init_phase_;  // NOLINT
  _RTL_CRITICAL_SECTION* critical_section_;
 
  GTEST_DISALLOW_COPY_AND_ASSIGN_(Mutex);
};
 
# define GTEST_DECLARE_STATIC_MUTEX_(mutex) \
    extern ::testing::internal::Mutex mutex
 
# define GTEST_DEFINE_STATIC_MUTEX_(mutex) \
    ::testing::internal::Mutex mutex(::testing::internal::Mutex::kStaticMutex)
 
// We cannot name this class MutexLock because the ctor declaration would
// conflict with a macro named MutexLock, which is defined on some
// platforms. That macro is used as a defensive measure to prevent against
// inadvertent misuses of MutexLock like "MutexLock(&mu)" rather than
// "MutexLock l(&mu)".  Hence the typedef trick below.
class GTestMutexLock {
 public:
  explicit GTestMutexLock(Mutex* mutex)
      : mutex_(mutex) { mutex_->Lock(); }
 
  ~GTestMutexLock() { mutex_->Unlock(); }
 
 private:
  Mutex* const mutex_;
 
  GTEST_DISALLOW_COPY_AND_ASSIGN_(GTestMutexLock);
};
 
typedef GTestMutexLock MutexLock;
 
// Base class for ValueHolder<T>.  Allows a caller to hold and delete a value
// without knowing its type.
class ThreadLocalValueHolderBase {
 public:
  virtual ~ThreadLocalValueHolderBase() {}
};
 
// Provides a way for a thread to send notifications to a ThreadLocal
// regardless of its parameter type.
class ThreadLocalBase {
 public:
  // Creates a new ValueHolder<T> object holding a default value passed to
  // this ThreadLocal<T>'s constructor and returns it.  It is the caller's
  // responsibility not to call this when the ThreadLocal<T> instance already
  // has a value on the current thread.
  virtual ThreadLocalValueHolderBase* NewValueForCurrentThread() const = 0;
 
 protected:
  ThreadLocalBase() {}
  virtual ~ThreadLocalBase() {}
 
 private:
  GTEST_DISALLOW_COPY_AND_ASSIGN_(ThreadLocalBase);
};
 
// Maps a thread to a set of ThreadLocals that have values instantiated on that
// thread and notifies them when the thread exits.  A ThreadLocal instance is
// expected to persist until all threads it has values on have terminated.
class GTEST_API_ ThreadLocalRegistry {
 public:
  // Registers thread_local_instance as having value on the current thread.
  // Returns a value that can be used to identify the thread from other threads.
  static ThreadLocalValueHolderBase* GetValueOnCurrentThread(
      const ThreadLocalBase* thread_local_instance);
 
  // Invoked when a ThreadLocal instance is destroyed.
  static void OnThreadLocalDestroyed(
      const ThreadLocalBase* thread_local_instance);
};
 
class GTEST_API_ ThreadWithParamBase {
 public:
  void Join();
 
 protected:
  class Runnable {
   public:
    virtual ~Runnable() {}
    virtual void Run() = 0;
  };
 
  ThreadWithParamBase(Runnable *runnable, Notification* thread_can_start);
  virtual ~ThreadWithParamBase();
 
 private:
  AutoHandle thread_;
};
 
// Helper class for testing Google Test's multi-threading constructs.
template <typename T>
class ThreadWithParam : public ThreadWithParamBase {
 public:
  typedef void UserThreadFunc(T);
 
  ThreadWithParam(UserThreadFunc* func, T param, Notification* thread_can_start)
      : ThreadWithParamBase(new RunnableImpl(func, param), thread_can_start) {
  }
  virtual ~ThreadWithParam() {}
 
 private:
  class RunnableImpl : public Runnable {
   public:
    RunnableImpl(UserThreadFunc* func, T param)
        : func_(func),
          param_(param) {
    }
    virtual ~RunnableImpl() {}
    virtual void Run() {
      func_(param_);
    }
 
   private:
    UserThreadFunc* const func_;
    const T param_;
 
    GTEST_DISALLOW_COPY_AND_ASSIGN_(RunnableImpl);
  };
 
  GTEST_DISALLOW_COPY_AND_ASSIGN_(ThreadWithParam);
};
 
// Implements thread-local storage on Windows systems.
//
//   // Thread 1
//   ThreadLocal<int> tl(100);  // 100 is the default value for each thread.
//
//   // Thread 2
//   tl.set(150);  // Changes the value for thread 2 only.
//   EXPECT_EQ(150, tl.get());
//
//   // Thread 1
//   EXPECT_EQ(100, tl.get());  // In thread 1, tl has the original value.
//   tl.set(200);
//   EXPECT_EQ(200, tl.get());
//
// The template type argument T must have a public copy constructor.
// In addition, the default ThreadLocal constructor requires T to have
// a public default constructor.
//
// The users of a TheadLocal instance have to make sure that all but one
// threads (including the main one) using that instance have exited before
// destroying it. Otherwise, the per-thread objects managed for them by the
// ThreadLocal instance are not guaranteed to be destroyed on all platforms.
//
// Google Test only uses global ThreadLocal objects.  That means they
// will die after main() has returned.  Therefore, no per-thread
// object managed by Google Test will be leaked as long as all threads
// using Google Test have exited when main() returns.
template <typename T>
class ThreadLocal : public ThreadLocalBase {
 public:
  ThreadLocal() : default_factory_(new DefaultValueHolderFactory()) {}
  explicit ThreadLocal(const T& value)
      : default_factory_(new InstanceValueHolderFactory(value)) {}
 
  ~ThreadLocal() { ThreadLocalRegistry::OnThreadLocalDestroyed(this); }
 
  T* pointer() { return GetOrCreateValue(); }
  const T* pointer() const { return GetOrCreateValue(); }
  const T& get() const { return *pointer(); }
  void set(const T& value) { *pointer() = value; }
 
 private:
  // Holds a value of T.  Can be deleted via its base class without the caller
  // knowing the type of T.
  class ValueHolder : public ThreadLocalValueHolderBase {
   public:
    ValueHolder() : value_() {}
    explicit ValueHolder(const T& value) : value_(value) {}
 
    T* pointer() { return &value_; }
 
   private:
    T value_;
    GTEST_DISALLOW_COPY_AND_ASSIGN_(ValueHolder);
  };
 
 
  T* GetOrCreateValue() const {
    return static_cast<ValueHolder*>(
        ThreadLocalRegistry::GetValueOnCurrentThread(this))->pointer();
  }
 
  virtual ThreadLocalValueHolderBase* NewValueForCurrentThread() const {
    return default_factory_->MakeNewHolder();
  }
 
  class ValueHolderFactory {
   public:
    ValueHolderFactory() {}
    virtual ~ValueHolderFactory() {}
    virtual ValueHolder* MakeNewHolder() const = 0;
 
   private:
    GTEST_DISALLOW_COPY_AND_ASSIGN_(ValueHolderFactory);
  };
 
  class DefaultValueHolderFactory : public ValueHolderFactory {
   public:
    DefaultValueHolderFactory() {}
    virtual ValueHolder* MakeNewHolder() const { return new ValueHolder(); }
 
   private:
    GTEST_DISALLOW_COPY_AND_ASSIGN_(DefaultValueHolderFactory);
  };
 
  class InstanceValueHolderFactory : public ValueHolderFactory {
   public:
    explicit InstanceValueHolderFactory(const T& value) : value_(value) {}
    virtual ValueHolder* MakeNewHolder() const {
      return new ValueHolder(value_);
    }
 
   private:
    const T value_;  // The value for each thread.
 
    GTEST_DISALLOW_COPY_AND_ASSIGN_(InstanceValueHolderFactory);
  };
 
  scoped_ptr<ValueHolderFactory> default_factory_;
 
  GTEST_DISALLOW_COPY_AND_ASSIGN_(ThreadLocal);
};
 
# elif GTEST_HAS_PTHREAD
 
// MutexBase and Mutex implement mutex on pthreads-based platforms.
class MutexBase {
 public:
  // Acquires this mutex.
  void Lock() {
    GTEST_CHECK_POSIX_SUCCESS_(pthread_mutex_lock(&mutex_));
    owner_ = pthread_self();
    has_owner_ = true;
  }
 
  // Releases this mutex.
  void Unlock() {
    // Since the lock is being released the owner_ field should no longer be
    // considered valid. We don't protect writing to has_owner_ here, as it's
    // the caller's responsibility to ensure that the current thread holds the
    // mutex when this is called.
    has_owner_ = false;
    GTEST_CHECK_POSIX_SUCCESS_(pthread_mutex_unlock(&mutex_));
  }
 
  // Does nothing if the current thread holds the mutex. Otherwise, crashes
  // with high probability.
  void AssertHeld() const {
    GTEST_CHECK_(has_owner_ && pthread_equal(owner_, pthread_self()))
        << "The current thread is not holding the mutex @" << this;
  }
 
  // A static mutex may be used before main() is entered.  It may even
  // be used before the dynamic initialization stage.  Therefore we
  // must be able to initialize a static mutex object at link time.
  // This means MutexBase has to be a POD and its member variables
  // have to be public.
 public:
  pthread_mutex_t mutex_;  // The underlying pthread mutex.
  // has_owner_ indicates whether the owner_ field below contains a valid thread
  // ID and is therefore safe to inspect (e.g., to use in pthread_equal()). All
  // accesses to the owner_ field should be protected by a check of this field.
  // An alternative might be to memset() owner_ to all zeros, but there's no
  // guarantee that a zero'd pthread_t is necessarily invalid or even different
  // from pthread_self().
  bool has_owner_;
  pthread_t owner_;  // The thread holding the mutex.
};
 
// Forward-declares a static mutex.
#  define GTEST_DECLARE_STATIC_MUTEX_(mutex) \
     extern ::testing::internal::MutexBase mutex
 
// Defines and statically (i.e. at link time) initializes a static mutex.
#  define GTEST_DEFINE_STATIC_MUTEX_(mutex) \
     ::testing::internal::MutexBase mutex = { PTHREAD_MUTEX_INITIALIZER, false, pthread_t() }
 
// The Mutex class can only be used for mutexes created at runtime. It
// shares its API with MutexBase otherwise.
class Mutex : public MutexBase {
 public:
  Mutex() {
    GTEST_CHECK_POSIX_SUCCESS_(pthread_mutex_init(&mutex_, NULL));
    has_owner_ = false;
  }
  ~Mutex() {
    GTEST_CHECK_POSIX_SUCCESS_(pthread_mutex_destroy(&mutex_));
  }
 
 private:
  GTEST_DISALLOW_COPY_AND_ASSIGN_(Mutex);
};
 
// We cannot name this class MutexLock because the ctor declaration would
// conflict with a macro named MutexLock, which is defined on some
// platforms. That macro is used as a defensive measure to prevent against
// inadvertent misuses of MutexLock like "MutexLock(&mu)" rather than
// "MutexLock l(&mu)".  Hence the typedef trick below.
class GTestMutexLock {
 public:
  explicit GTestMutexLock(MutexBase* mutex)
      : mutex_(mutex) { mutex_->Lock(); }
 
  ~GTestMutexLock() { mutex_->Unlock(); }
 
 private:
  MutexBase* const mutex_;
 
  GTEST_DISALLOW_COPY_AND_ASSIGN_(GTestMutexLock);
};
 
typedef GTestMutexLock MutexLock;
 
// Helpers for ThreadLocal.
 
// pthread_key_create() requires DeleteThreadLocalValue() to have
// C-linkage.  Therefore it cannot be templatized to access
// ThreadLocal<T>.  Hence the need for class
// ThreadLocalValueHolderBase.
class ThreadLocalValueHolderBase {
 public:
  virtual ~ThreadLocalValueHolderBase() {}
};
 
// Called by pthread to delete thread-local data stored by
// pthread_setspecific().
extern "C" inline void DeleteThreadLocalValue(void* value_holder) {
  delete static_cast<ThreadLocalValueHolderBase*>(value_holder);
}
 
// Implements thread-local storage on pthreads-based systems.
template <typename T>
class ThreadLocal {
 public:
  ThreadLocal()
      : key_(CreateKey()), default_factory_(new DefaultValueHolderFactory()) {}
  explicit ThreadLocal(const T& value)
      : key_(CreateKey()),
        default_factory_(new InstanceValueHolderFactory(value)) {}
 
  ~ThreadLocal() {
    // Destroys the managed object for the current thread, if any.
    DeleteThreadLocalValue(pthread_getspecific(key_));
 
    // Releases resources associated with the key.  This will *not*
    // delete managed objects for other threads.
    GTEST_CHECK_POSIX_SUCCESS_(pthread_key_delete(key_));
  }
 
  T* pointer() { return GetOrCreateValue(); }
  const T* pointer() const { return GetOrCreateValue(); }
  const T& get() const { return *pointer(); }
  void set(const T& value) { *pointer() = value; }
 
 private:
  // Holds a value of type T.
  class ValueHolder : public ThreadLocalValueHolderBase {
   public:
    ValueHolder() : value_() {}
    explicit ValueHolder(const T& value) : value_(value) {}
 
    T* pointer() { return &value_; }
 
   private:
    T value_;
    GTEST_DISALLOW_COPY_AND_ASSIGN_(ValueHolder);
  };
 
  static pthread_key_t CreateKey() {
    pthread_key_t key;
    // When a thread exits, DeleteThreadLocalValue() will be called on
    // the object managed for that thread.
    GTEST_CHECK_POSIX_SUCCESS_(
        pthread_key_create(&key, &DeleteThreadLocalValue));
    return key;
  }
 
  T* GetOrCreateValue() const {
    ThreadLocalValueHolderBase* const holder =
        static_cast<ThreadLocalValueHolderBase*>(pthread_getspecific(key_));
    if (holder != NULL) {
      return CheckedDowncastToActualType<ValueHolder>(holder)->pointer();
    }
 
    ValueHolder* const new_holder = default_factory_->MakeNewHolder();
    ThreadLocalValueHolderBase* const holder_base = new_holder;
    GTEST_CHECK_POSIX_SUCCESS_(pthread_setspecific(key_, holder_base));
    return new_holder->pointer();
  }
 
  class ValueHolderFactory {
   public:
    ValueHolderFactory() {}
    virtual ~ValueHolderFactory() {}
    virtual ValueHolder* MakeNewHolder() const = 0;
 
   private:
    GTEST_DISALLOW_COPY_AND_ASSIGN_(ValueHolderFactory);
  };
 
  class DefaultValueHolderFactory : public ValueHolderFactory {
   public:
    DefaultValueHolderFactory() {}
    virtual ValueHolder* MakeNewHolder() const { return new ValueHolder(); }
 
   private:
    GTEST_DISALLOW_COPY_AND_ASSIGN_(DefaultValueHolderFactory);
  };
 
  class InstanceValueHolderFactory : public ValueHolderFactory {
   public:
    explicit InstanceValueHolderFactory(const T& value) : value_(value) {}
    virtual ValueHolder* MakeNewHolder() const {
      return new ValueHolder(value_);
    }
 
   private:
    const T value_;  // The value for each thread.
 
    GTEST_DISALLOW_COPY_AND_ASSIGN_(InstanceValueHolderFactory);
  };
 
  // A key pthreads uses for looking up per-thread values.
  const pthread_key_t key_;
  scoped_ptr<ValueHolderFactory> default_factory_;
 
  GTEST_DISALLOW_COPY_AND_ASSIGN_(ThreadLocal);
};
 
# endif  // GTEST_HAS_MUTEX_AND_THREAD_LOCAL_
 
#else  // GTEST_IS_THREADSAFE
 
// A dummy implementation of synchronization primitives (mutex, lock,
// and thread-local variable).  Necessary for compiling Google Test where
// mutex is not supported - using Google Test in multiple threads is not
// supported on such platforms.
 
class Mutex {
 public:
  Mutex() {}
  void Lock() {}
  void Unlock() {}
  void AssertHeld() const {}
};
 
# define GTEST_DECLARE_STATIC_MUTEX_(mutex) \
  extern ::testing::internal::Mutex mutex
 
# define GTEST_DEFINE_STATIC_MUTEX_(mutex) ::testing::internal::Mutex mutex
 
// We cannot name this class MutexLock because the ctor declaration would
// conflict with a macro named MutexLock, which is defined on some
// platforms. That macro is used as a defensive measure to prevent against
// inadvertent misuses of MutexLock like "MutexLock(&mu)" rather than
// "MutexLock l(&mu)".  Hence the typedef trick below.
class GTestMutexLock {
 public:
  explicit GTestMutexLock(Mutex*) {}  // NOLINT
};
 
typedef GTestMutexLock MutexLock;
 
template <typename T>
class ThreadLocal {
 public:
  ThreadLocal() : value_() {}
  explicit ThreadLocal(const T& value) : value_(value) {}
  T* pointer() { return &value_; }
  const T* pointer() const { return &value_; }
  const T& get() const { return value_; }
  void set(const T& value) { value_ = value; }
 private:
  T value_;
};
 
#endif  // GTEST_IS_THREADSAFE
 
// Returns the number of threads running in the process, or 0 to indicate that
// we cannot detect it.
GTEST_API_ size_t GetThreadCount();
 
// Passing non-POD classes through ellipsis (...) crashes the ARM
// compiler and generates a warning in Sun Studio.  The Nokia Symbian
// and the IBM XL C/C++ compiler try to instantiate a copy constructor
// for objects passed through ellipsis (...), failing for uncopyable
// objects.  We define this to ensure that only POD is passed through
// ellipsis on these systems.
#if defined(__SYMBIAN32__) || defined(__IBMCPP__) || defined(__SUNPRO_CC)
// We lose support for NULL detection where the compiler doesn't like
// passing non-POD classes through ellipsis (...).
# define GTEST_ELLIPSIS_NEEDS_POD_ 1
#else
# define GTEST_CAN_COMPARE_NULL 1
#endif
 
// The Nokia Symbian and IBM XL C/C++ compilers cannot decide between
// const T& and const T* in a function template.  These compilers
// _can_ decide between class template specializations for T and T*,
// so a tr1::type_traits-like is_pointer works.
#if defined(__SYMBIAN32__) || defined(__IBMCPP__)
# define GTEST_NEEDS_IS_POINTER_ 1
#endif
 
template <bool bool_value>
struct bool_constant {
  typedef bool_constant<bool_value> type;
  static const bool value = bool_value;
};
template <bool bool_value> const bool bool_constant<bool_value>::value;
 
typedef bool_constant<false> false_type;
typedef bool_constant<true> true_type;
 
template <typename T>
struct is_pointer : public false_type {};
 
template <typename T>
struct is_pointer<T*> : public true_type {};
 
template <typename Iterator>
struct IteratorTraits {
  typedef typename Iterator::value_type value_type;
};
 
template <typename T>
struct IteratorTraits<T*> {
  typedef T value_type;
};
 
template <typename T>
struct IteratorTraits<const T*> {
  typedef T value_type;
};
 
#if GTEST_OS_WINDOWS
# define GTEST_PATH_SEP_ "\\"
# define GTEST_HAS_ALT_PATH_SEP_ 1
// The biggest signed integer type the compiler supports.
typedef __int64 BiggestInt;
#else
# define GTEST_PATH_SEP_ "/"
# define GTEST_HAS_ALT_PATH_SEP_ 0
typedef long long BiggestInt;  // NOLINT
#endif  // GTEST_OS_WINDOWS
 
// Utilities for char.
 
// isspace(int ch) and friends accept an unsigned char or EOF.  char
// may be signed, depending on the compiler (or compiler flags).
// Therefore we need to cast a char to unsigned char before calling
// isspace(), etc.
 
inline bool IsAlpha(char ch) {
  return isalpha(static_cast<unsigned char>(ch)) != 0;
}
inline bool IsAlNum(char ch) {
  return isalnum(static_cast<unsigned char>(ch)) != 0;
}
inline bool IsDigit(char ch) {
  return isdigit(static_cast<unsigned char>(ch)) != 0;
}
inline bool IsLower(char ch) {
  return islower(static_cast<unsigned char>(ch)) != 0;
}
inline bool IsSpace(char ch) {
  return isspace(static_cast<unsigned char>(ch)) != 0;
}
inline bool IsUpper(char ch) {
  return isupper(static_cast<unsigned char>(ch)) != 0;
}
inline bool IsXDigit(char ch) {
  return isxdigit(static_cast<unsigned char>(ch)) != 0;
}
inline bool IsXDigit(wchar_t ch) {
  const unsigned char low_byte = static_cast<unsigned char>(ch);
  return ch == low_byte && isxdigit(low_byte) != 0;
}
 
inline char ToLower(char ch) {
  return static_cast<char>(tolower(static_cast<unsigned char>(ch)));
}
inline char ToUpper(char ch) {
  return static_cast<char>(toupper(static_cast<unsigned char>(ch)));
}
 
inline std::string StripTrailingSpaces(std::string str) {
  std::string::iterator it = str.end();
  while (it != str.begin() && IsSpace(*--it))
    it = str.erase(it);
  return str;
}
 
// The testing::internal::posix namespace holds wrappers for common
// POSIX functions.  These wrappers hide the differences between
// Windows/MSVC and POSIX systems.  Since some compilers define these
// standard functions as macros, the wrapper cannot have the same name
// as the wrapped function.
 
namespace posix {
 
// Functions with a different name on Windows.
 
#if GTEST_OS_WINDOWS
 
typedef struct _stat StatStruct;
 
# ifdef __BORLANDC__
inline int IsATTY(int fd) { return isatty(fd); }
inline int StrCaseCmp(const char* s1, const char* s2) {
  return stricmp(s1, s2);
}
inline char* StrDup(const char* src) { return strdup(src); }
# else  // !__BORLANDC__
#  if GTEST_OS_WINDOWS_MOBILE
inline int IsATTY(int /* fd */) { return 0; }
#  else
inline int IsATTY(int fd) { return _isatty(fd); }
#  endif  // GTEST_OS_WINDOWS_MOBILE
inline int StrCaseCmp(const char* s1, const char* s2) {
  return _stricmp(s1, s2);
}
inline char* StrDup(const char* src) { return _strdup(src); }
# endif  // __BORLANDC__
 
# if GTEST_OS_WINDOWS_MOBILE
inline int FileNo(FILE* file) { return reinterpret_cast<int>(_fileno(file)); }
// Stat(), RmDir(), and IsDir() are not needed on Windows CE at this
// time and thus not defined there.
# else
inline int FileNo(FILE* file) { return _fileno(file); }
inline int Stat(const char* path, StatStruct* buf) { return _stat(path, buf); }
inline int RmDir(const char* dir) { return _rmdir(dir); }
inline bool IsDir(const StatStruct& st) {
  return (_S_IFDIR & st.st_mode) != 0;
}
# endif  // GTEST_OS_WINDOWS_MOBILE
 
#else
 
typedef struct stat StatStruct;
 
inline int FileNo(FILE* file) { return fileno(file); }
inline int IsATTY(int fd) { return isatty(fd); }
inline int Stat(const char* path, StatStruct* buf) { return stat(path, buf); }
inline int StrCaseCmp(const char* s1, const char* s2) {
  return strcasecmp(s1, s2);
}
inline char* StrDup(const char* src) { return strdup(src); }
inline int RmDir(const char* dir) { return rmdir(dir); }
inline bool IsDir(const StatStruct& st) { return S_ISDIR(st.st_mode); }
 
#endif  // GTEST_OS_WINDOWS
 
// Functions deprecated by MSVC 8.0.
 
GTEST_DISABLE_MSC_WARNINGS_PUSH_(4996 /* deprecated function */)
 
inline const char* StrNCpy(char* dest, const char* src, size_t n) {
  return strncpy(dest, src, n);
}
 
// ChDir(), FReopen(), FDOpen(), Read(), Write(), Close(), and
// StrError() aren't needed on Windows CE at this time and thus not
// defined there.
 
#if !GTEST_OS_WINDOWS_MOBILE && !GTEST_OS_WINDOWS_PHONE && !GTEST_OS_WINDOWS_RT
inline int ChDir(const char* dir) { return chdir(dir); }
#endif
inline FILE* FOpen(const char* path, const char* mode) {
  return fopen(path, mode);
}
#if !GTEST_OS_WINDOWS_MOBILE
inline FILE *FReopen(const char* path, const char* mode, FILE* stream) {
  return freopen(path, mode, stream);
}
inline FILE* FDOpen(int fd, const char* mode) { return fdopen(fd, mode); }
#endif
inline int FClose(FILE* fp) { return fclose(fp); }
#if !GTEST_OS_WINDOWS_MOBILE
inline int Read(int fd, void* buf, unsigned int count) {
  return static_cast<int>(read(fd, buf, count));
}
inline int Write(int fd, const void* buf, unsigned int count) {
  return static_cast<int>(write(fd, buf, count));
}
inline int Close(int fd) { return close(fd); }
inline const char* StrError(int errnum) { return strerror(errnum); }
#endif
inline const char* GetEnv(const char* name) {
#if GTEST_OS_WINDOWS_MOBILE || GTEST_OS_WINDOWS_PHONE | GTEST_OS_WINDOWS_RT
  // We are on Windows CE, which has no environment variables.
  static_cast<void>(name);  // To prevent 'unused argument' warning.
  return NULL;
#elif defined(__BORLANDC__) || defined(__SunOS_5_8) || defined(__SunOS_5_9)
  // Environment variables which we programmatically clear will be set to the
  // empty string rather than unset (NULL).  Handle that case.
  const char* const env = getenv(name);
  return (env != NULL && env[0] != '\0') ? env : NULL;
#else
  return getenv(name);
#endif
}
 
GTEST_DISABLE_MSC_WARNINGS_POP_()
 
#if GTEST_OS_WINDOWS_MOBILE
// Windows CE has no C library. The abort() function is used in
// several places in Google Test. This implementation provides a reasonable
// imitation of standard behaviour.
void Abort();
#else
inline void Abort() { abort(); }
#endif  // GTEST_OS_WINDOWS_MOBILE
 
}  // namespace posix
 
// MSVC "deprecates" snprintf and issues warnings wherever it is used.  In
// order to avoid these warnings, we need to use _snprintf or _snprintf_s on
// MSVC-based platforms.  We map the GTEST_SNPRINTF_ macro to the appropriate
// function in order to achieve that.  We use macro definition here because
// snprintf is a variadic function.
#if _MSC_VER >= 1400 && !GTEST_OS_WINDOWS_MOBILE
// MSVC 2005 and above support variadic macros.
# define GTEST_SNPRINTF_(buffer, size, format, ...) \
     _snprintf_s(buffer, size, size, format, __VA_ARGS__)
#elif defined(_MSC_VER)
// Windows CE does not define _snprintf_s and MSVC prior to 2005 doesn't
// complain about _snprintf.
# define GTEST_SNPRINTF_ _snprintf
#else
# define GTEST_SNPRINTF_ snprintf
#endif
 
// The maximum number a BiggestInt can represent.  This definition
// works no matter BiggestInt is represented in one's complement or
// two's complement.
//
// We cannot rely on numeric_limits in STL, as __int64 and long long
// are not part of standard C++ and numeric_limits doesn't need to be
// defined for them.
const BiggestInt kMaxBiggestInt =
    ~(static_cast<BiggestInt>(1) << (8*sizeof(BiggestInt) - 1));
 
// This template class serves as a compile-time function from size to
// type.  It maps a size in bytes to a primitive type with that
// size. e.g.
//
//   TypeWithSize<4>::UInt
//
// is typedef-ed to be unsigned int (unsigned integer made up of 4
// bytes).
//
// Such functionality should belong to STL, but I cannot find it
// there.
//
// Google Test uses this class in the implementation of floating-point
// comparison.
//
// For now it only handles UInt (unsigned int) as that's all Google Test
// needs.  Other types can be easily added in the future if need
// arises.
template <size_t size>
class TypeWithSize {
 public:
  // This prevents the user from using TypeWithSize<N> with incorrect
  // values of N.
  typedef void UInt;
};
 
// The specialization for size 4.
template <>
class TypeWithSize<4> {
 public:
  // unsigned int has size 4 in both gcc and MSVC.
  //
  // As base/basictypes.h doesn't compile on Windows, we cannot use
  // uint32, uint64, and etc here.
  typedef int Int;
  typedef unsigned int UInt;
};
 
// The specialization for size 8.
template <>
class TypeWithSize<8> {
 public:
#if GTEST_OS_WINDOWS
  typedef __int64 Int;
  typedef unsigned __int64 UInt;
#else
  typedef long long Int;  // NOLINT
  typedef unsigned long long UInt;  // NOLINT
#endif  // GTEST_OS_WINDOWS
};
 
// Integer types of known sizes.
typedef TypeWithSize<4>::Int Int32;
typedef TypeWithSize<4>::UInt UInt32;
typedef TypeWithSize<8>::Int Int64;
typedef TypeWithSize<8>::UInt UInt64;
typedef TypeWithSize<8>::Int TimeInMillis;  // Represents time in milliseconds.
 
// Utilities for command line flags and environment variables.
 
// Macro for referencing flags.
#if !defined(GTEST_FLAG)
# define GTEST_FLAG(name) FLAGS_gtest_##name
#endif  // !defined(GTEST_FLAG)
 
#if !defined(GTEST_USE_OWN_FLAGFILE_FLAG_)
# define GTEST_USE_OWN_FLAGFILE_FLAG_ 1
#endif  // !defined(GTEST_USE_OWN_FLAGFILE_FLAG_)
 
#if !defined(GTEST_DECLARE_bool_)
# define GTEST_FLAG_SAVER_ ::testing::internal::GTestFlagSaver
 
// Macros for declaring flags.
# define GTEST_DECLARE_bool_(name) GTEST_API_ extern bool GTEST_FLAG(name)
# define GTEST_DECLARE_int32_(name) \
    GTEST_API_ extern ::testing::internal::Int32 GTEST_FLAG(name)
#define GTEST_DECLARE_string_(name) \
    GTEST_API_ extern ::std::string GTEST_FLAG(name)
 
// Macros for defining flags.
#define GTEST_DEFINE_bool_(name, default_val, doc) \
    GTEST_API_ bool GTEST_FLAG(name) = (default_val)
#define GTEST_DEFINE_int32_(name, default_val, doc) \
    GTEST_API_ ::testing::internal::Int32 GTEST_FLAG(name) = (default_val)
#define GTEST_DEFINE_string_(name, default_val, doc) \
    GTEST_API_ ::std::string GTEST_FLAG(name) = (default_val)
 
#endif  // !defined(GTEST_DECLARE_bool_)
 
// Thread annotations
#if !defined(GTEST_EXCLUSIVE_LOCK_REQUIRED_)
# define GTEST_EXCLUSIVE_LOCK_REQUIRED_(locks)
# define GTEST_LOCK_EXCLUDED_(locks)
#endif  // !defined(GTEST_EXCLUSIVE_LOCK_REQUIRED_)
 
// Parses 'str' for a 32-bit signed integer.  If successful, writes the result
// to *value and returns true; otherwise leaves *value unchanged and returns
// false.
// TODO(chandlerc): Find a better way to refactor flag and environment parsing
// out of both gtest-port.cc and gtest.cc to avoid exporting this utility
// function.
bool ParseInt32(const Message& src_text, const char* str, Int32* value);
 
// Parses a bool/Int32/string from the environment variable
// corresponding to the given Google Test flag.
bool BoolFromGTestEnv(const char* flag, bool default_val);
GTEST_API_ Int32 Int32FromGTestEnv(const char* flag, Int32 default_val);
std::string StringFromGTestEnv(const char* flag, const char* default_val);
 
}  // namespace internal
}  // namespace testing
 
#endif  // GTEST_INCLUDE_GTEST_INTERNAL_GTEST_PORT_H_