26#if !LELY_NO_STDIO && LELY_HAVE_SOCKET_CAN
35#ifdef HAVE_LINUX_CAN_H
38#ifdef HAVE_LINUX_CAN_ERROR_H
39#include <linux/can/error.h>
48 if (!(frame->can_id & CAN_ERR_FLAG))
52 enum can_error error = perror ? *perror : 0;
54#ifdef HAVE_LINUX_CAN_ERROR_H
55 if (frame->can_dlc != CAN_ERR_DLC) {
60 if (frame->can_id & CAN_ERR_RESTARTED)
63 if (frame->can_id & CAN_ERR_TX_TIMEOUT)
64 error |= CAN_ERROR_OTHER;
66 if (frame->can_id & CAN_ERR_CRTL) {
67#ifdef CAN_ERR_CRTL_ACTIVE
68 if (frame->data[1] & CAN_ERR_CRTL_ACTIVE)
72 if (frame->data[1] & (CAN_ERR_CRTL_RX_PASSIVE
73 | CAN_ERR_CRTL_TX_PASSIVE))
78 if (frame->can_id & CAN_ERR_PROT) {
79 if (frame->data[2] & CAN_ERR_PROT_BIT)
80 error |= CAN_ERROR_BIT;
81 if (frame->data[2] & CAN_ERR_PROT_FORM)
82 error |= CAN_ERROR_FORM;
83 if (frame->data[2] & CAN_ERR_PROT_STUFF)
84 error |= CAN_ERROR_STUFF;
86 if (frame->data[2] & (CAN_ERR_PROT_BIT0 | CAN_ERR_PROT_BIT1
87 | CAN_ERR_PROT_OVERLOAD))
89 error |= CAN_ERROR_OTHER;
90 if (frame->data[2] & CAN_ERR_PROT_ACTIVE)
92 if (frame->data[3] & CAN_ERR_PROT_LOC_CRC_SEQ)
93 error |= CAN_ERROR_CRC;
96 if ((frame->can_id & CAN_ERR_TRX) && frame->data[4])
97 error |= CAN_ERROR_OTHER;
99 if (frame->can_id & CAN_ERR_ACK)
100 error |= CAN_ERROR_ACK;
102 if (frame->can_id & CAN_ERR_BUSOFF)
121 if (src->can_id & CAN_ERR_FLAG) {
126 memset(dst, 0,
sizeof(*dst));
128 if (src->can_id & CAN_EFF_FLAG) {
129 dst->
id = src->can_id & CAN_EFF_MASK;
132 dst->
id = src->can_id & CAN_SFF_MASK;
134 if (src->can_id & CAN_RTR_FLAG)
139 memcpy(dst->
data, src->data, dst->
len);
151 if (src->
flags & CAN_FLAG_EDL) {
157 memset(dst, 0,
sizeof(*dst));
158 dst->can_id = src->
id;
160 dst->can_id &= CAN_EFF_MASK;
161 dst->can_id |= CAN_EFF_FLAG;
163 dst->can_id &= CAN_SFF_MASK;
167 dst->can_id |= CAN_RTR_FLAG;
169 memcpy(dst->data, src->
data, dst->can_dlc);
174#if !LELY_NO_CANFD && defined(CANFD_MTU)
182 if (src->can_id & CAN_ERR_FLAG) {
187 memset(dst, 0,
sizeof(*dst));
188 dst->
flags = CAN_FLAG_EDL;
189 if (src->can_id & CAN_EFF_FLAG) {
190 dst->
id = src->can_id & CAN_EFF_MASK;
193 dst->
id = src->can_id & CAN_SFF_MASK;
195 if (src->flags & CANFD_BRS)
197 if (src->flags & CANFD_ESI)
200 memcpy(dst->
data, src->data, dst->
len);
211 if (!(src->
flags & CAN_FLAG_EDL)) {
216 memset(dst, 0,
sizeof(*dst));
217 dst->can_id = src->
id;
219 dst->can_id &= CAN_EFF_MASK;
220 dst->can_id |= CAN_EFF_FLAG;
222 dst->can_id &= CAN_SFF_MASK;
226 dst->flags |= CANFD_BRS;
228 dst->flags |= CANFD_ESI;
230 memcpy(dst->data, src->
data, dst->len);
can_error
The error flags of a CAN bus, which are not mutually exclusive.
@ CAN_STATE_BUSOFF
The bus off state (TX/RX error count >= 256).
@ CAN_STATE_PASSIVE
The error passive state (TX/RX error count < 256).
@ CAN_STATE_ACTIVE
The error active state (TX/RX error count < 128).
#define CAN_MAX_LEN
The maximum number of bytes in the payload of a CAN format frame.
@ CAN_FLAG_IDE
The Identifier Extension (IDE) flag.
@ CAN_FLAG_RTR
The Remote Transmission Request (RTR) flag (unavailable in CAN FD format frames).
@ CAN_FLAG_BRS
The Bit Rate Switch (BRS) flag (only available in CAN FD format frames).
@ CAN_FLAG_ESI
The Error State Indicator (ESI) flag (only available in CAN FD format frames).
#define CANFD_MAX_LEN
The maximum number of bytes in the payload of a CAN FD format frame.
This header file is part of the utilities library; it contains the native and platform-independent er...
@ ERRNUM_INVAL
Invalid argument.
void set_errnum(errnum_t errnum)
Sets the current (thread-specific) platform-independent error number to errnum.
This header file is part of the I/O library; it contains the CAN bus declarations for Linux.
This is the public header file of the utilities library.
#define MIN(a, b)
Returns the minimum of a and b.
This header file is part of the CAN library; it contains the SocketCAN interface declarations.
int can_msg2canfd_frame(const struct can_msg *src, struct canfd_frame *dst)
Converts a can_msg frame to a SocketCAN CAN FD frame.
int can_frame2can_msg(const struct can_frame *src, struct can_msg *dst)
Converts a SocketCAN CAN frame to a can_msg frame.
int canfd_frame2can_msg(const struct canfd_frame *src, struct can_msg *dst)
Converts a SocketCAN CAN FD frame to a can_msg frame.
int can_msg2can_frame(const struct can_msg *src, struct can_frame *dst)
Converts a can_msg frame to a SocketCAN CAN frame.
int can_frame_is_error(const struct can_frame *frame, enum can_state *pstate, enum can_error *perror)
Checks if a SocketCAN CAN frame is an error frame and parses the bus state and error flags if it is.
This is the internal header file of the CAN library.
This header file is part of the C11 and POSIX compatibility library; it includes <string....
A CAN or CAN FD format frame.
uint_least8_t data[CAN_MSG_MAX_LEN]
The frame payload (in case of a data frame).
uint_least32_t id
The identifier (11 or 29 bits, depending on the CAN_FLAG_IDE flag).
uint_least8_t flags
The flags (any combination of CAN_FLAG_IDE, CAN_FLAG_RTR, CAN_FLAG_FDF, CAN_FLAG_BRS and CAN_FLAG_ESI...
uint_least8_t len
The number of bytes in data (or the requested number of bytes in case of a remote frame).