Metadata-Version: 1.2
Name: pms5003
Version: 0.0.5
Summary: PMS5003 Particulate Sensor
Home-page: https://www.pimoroni.com
Author: Philip Howard
Author-email: phil@pimoroni.com
License: MIT
Project-URL: GitHub, https://www.github.com/pimoroni/pms5003-python
Description: PMS5003 Particulate Sensor
        ==========================
        
        |Build Status| |Coverage Status| |PyPi Package| |Python Versions|
        
        Installing
        ==========
        
        Stable library from PyPi:
        
        -  Just run ``sudo pip install pms5003``
        
        Latest/development library from GitHub:
        
        -  ``git clone https://github.com/pimoroni/pms5003-python``
        -  ``cd pms5003-python``
        -  ``sudo ./install.sh``
        
        Requirements
        ============
        
        The serial port on your Raspberry Pi must be enabled:
        
        ::
        
            # Disable serial terminal over /dev/ttyAMA0
            sudo raspi-config nonint do_serial 1
        
            # Enable serial port
            raspi-config nonint set_config_var enable_uart 1 /boot/config.txt
        
        And additionally be using a full UART (versus the default miniUART):
        
        Add the line ``dtoverlay=pi3-miniuart-bt`` to your ``/boot/config.txt``
        
        This will switch Bluetooth over to miniUART, see
        https://www.raspberrypi.org/documentation/configuration/uart.md for more
        details.
        
        .. |Build Status| image:: https://travis-ci.com/pimoroni/pms5003-python.svg?branch=master
           :target: https://travis-ci.com/pimoroni/pms5003-python
        .. |Coverage Status| image:: https://coveralls.io/repos/github/pimoroni/pms5003-python/badge.svg?branch=master
           :target: https://coveralls.io/github/pimoroni/pms5003-python?branch=master
        .. |PyPi Package| image:: https://img.shields.io/pypi/v/pms5003.svg
           :target: https://pypi.python.org/pypi/pms5003
        .. |Python Versions| image:: https://img.shields.io/pypi/pyversions/pms5003.svg
           :target: https://pypi.python.org/pypi/pms5003
        
        0.0.5
        -----
        
        * BugFix: Read start-of-frame a byte at a time to avoid misalignment issues, potential fix for #2, #3 and #4
        * Enhancement: Clarified error message when length packet cannot be read
        * Enhancement: Clarified error message when start of frame cannot be read
        * Enhancement: Added new error message where raw data length is less than expected (frame length)
        
        0.0.4
        -----
        
        * Packaging improvements/bugfix from boilerplate
        
        0.0.3
        -----
        
        * Added pyserial dependency
        
        0.0.2
        -----
        
        * Added reset function
        
        0.0.1
        -----
        
        * Initial Release
        
Keywords: Raspberry Pi
Platform: UNKNOWN
Classifier: Development Status :: 4 - Beta
Classifier: Operating System :: POSIX :: Linux
Classifier: License :: OSI Approved :: MIT License
Classifier: Intended Audience :: Developers
Classifier: Programming Language :: Python :: 2.6
Classifier: Programming Language :: Python :: 2.7
Classifier: Programming Language :: Python :: 3
Classifier: Topic :: Software Development
Classifier: Topic :: Software Development :: Libraries
Classifier: Topic :: System :: Hardware
