# leave at least one comment here to skip the BOM character
# language name
# -----------------------------------------------------
# Global Settings
#
lang => Deutsch
#
# -----------------------------------------------------
# -----------------------------------------------------
# Common (webif.sh)
#
big_warning => WARNUNG
page_incomplete => Diese Seite ist unvollständig und funktioniert nicht wunschgemäß oder garnicht.
page_untested => Diese Seite ist ungetestet und funktioniert möglicherweise nicht wunschgemäß.
page_untested_kamikaze => Diese Seite wurde noch nicht unter Kamikaze geprüft.
#
features_require_package => Funktionen auf dieser Seite benötigen das Paket
features_install => Installieren
#
Settings saved => Einstellungen gespeichert
Settings not saved => Einstellungen nicht gespeichert
Save Changes => Speichern
Status => Status
Host => Host
Uptime => Betriebszeit
Load => Systemlast
Administrative Console => Verwaltungs Konsole
X-Wrt Administration Console => X-Wrt Verwaltungs Konsole
Warning => Warnung
Password_warning => Es wurde noch kein Passwort für Web-Administration und SSH gesetzt.<br />Bitte geben Sie jetzt ein neues Passwort ein (Benutzername im Browser: 'root').
#
Apply Changes => Übernehmen
Clear Changes => Verwerfen
Review Changes => Anzeigen
#
making_usable => Benutzer Erweiterungen für OpenWrt
#
# as far unknown
Host Name => Hostname
Categories => Kategorien
more... => Weitere Informationen...
Add => Hinzufügen
Remove => Entfernen
#
# -----------------------------------------------------
# -----------------------------------------------------
#
# Categories
#
Subcategories => Unterkategorien
#
Info => Info
About => Über
#Router Info => Routerinformationen
#
Graphs => Graphs
#
Status => Status
Connections => Netzwerkverbindungen
DHCP => DHCP
Wireless => WLAN
#
System => System
Password => Passwort
Settings => Einstellungen
Installed Software => Installierte Software
Firmware Upgrade => Firmware aktualisieren
#
Network => Netzwerk
LAN => LAN
WAN => Internet
Wireless => WLAN
Advanced Wireless => WLAN (erweitert)
Hosts => Host-Konfiguration
#
# -----------------------------------------------------
# -----------------------------------------------------
#
# 'Info' -> 'System' (info.sh)
# 
System Information => System Informationen
#
Please wait => Bitte warten
info_error_checking => ES IST EIN FEHLER AUFGETRETEN
info_update_available => webif&sup2; Update verfügbar
info_view_changes => Änderungen ansehen
info_upgrade_webif => Webif&sup2; Update installieren
info_already_latest => die aktuellste webif&sup2; Version ist bereits installiert
#
info_wait_install => Bitte warten, die Installation kann ein wenig dauern.
#
Firmware => Firmware
Kernel => Kernel
MAC => MAC
Device => Gerät
Board => Board
Username => Benutzername
Web mgt. console => Web Verw. Konsole
Version => Version
#
info_check_update => webif&sup2; Updates suchen
info_check_daily_text => <i>daily builds</i> bei der Suche nach webif&sup2; Updates einbeziehen
#
# -----------------------------------------------------
# -----------------------------------------------------
#
# 'Info' -> 'About' (info_about.sh)
# 
Copyright => Copyright

GPL_Text => Dieses Programm ist freie Software. Sie können es unter den Bedingungen der GNU General Public License,<br /> wie von der Free Software Foundation veröffentlicht, weitergeben und/oder modifizieren,<br /> entweder gemäß Version 2 der Lizenz oder (nach Ihrer Option) jeder späteren Version.
Contributions by => Mit Beiträgen von
Layout based on => Layout basiert auf
by => von


No config change. => Es wurden keine Konfigurationsänderungen vorgenommen.
Config discarded. => Ihre Konfigurationsänderungen wurden verworfen.
Config changes: => Aktuelle Konfigurationsänderungen:
Updating config... => Aktualisiere die Konfiguration...


# 'Connections' page
Connection Status => Verbindungsstatus
Physical Connections => Netzwerkschnittstellen
Router Connections => Netzwerkverbindungen auf dem Router


# 'Wireless Status' page
Wireless Status => WLAN-Status

# 'Password' page
Password Change => Passwort ändern
New Password => Neues Passwort
Confirm Password => Passwort bestätigen

# 'System Settings' page
System Settings => Systemeinstellungen
Host Name => Hostname
Language => Sprache


# 'Firmware Upgrade' page
Firmware format => Firmware-Format
Error => Fehler
done => fertig
Invalid_format => Das Dateiformat der Firmware ist ungültig
Erase_JFFS2 => JFFS2-Partition löschen
Options => Optionen
Firmware_image => Firmware-Datei:
Upgrade => Aktualisieren
Upgrading... => Aktualisiere...

# 'LAN Settings' page
LAN Settings => Netzwerkeinstellungen
LAN Configuration => Netzwerkkonfiguration
Netmask => Subnetzmaske
Default Gateway => Standardgateway
DNS Servers => DNS-Server
DNS Address => DNS-Serveradresse

Note => Hinweis


# 'WAN Settings' page
WAN Settings => Internet-Einstellungen
WAN Configuration => Internet-Konfiguration
PPTP Server IP => PPTP-Serveradresse
Connection Type => Verbindungsart
No WAN => Keine Verbindung
DHCP => DHCP
Static IP => Statische Konfiguration
IP Settings => IP-Konfiguration
PPP Settings => PPP-Einstellungen
Redial Policy => Verbindungsaufbau
Connect on Demand => Bei Bedarf
Keep Alive => Verbindung aufrechterhalten
Maximum Idle Time => Wartezeit bei Inaktivität
Redial Timeout => Wartezeit bei unterbrochener Verbindung
MTU => Maximale Paketgröße



# 'Wireless Configuration' page
Wireless Configuration => WLAN-Konfiguration
Wireless Interface => WLAN-Interface
WEP Key => WEP-Schlüssel
Selected WEP Key => Ausgewählter WEP Schlüssel
WPA PSK => WPA-Schlüssel
ESSID => ESSID
Channel => Kanal
RADIUS IP Address => RADIUS-Serveradresse
RADIUS Server Key => RADIUS-Serverpasswort
Enabled => Aktiviert
Disabled => Deaktiviert
ESSID Broadcast => ESSID-Broadcast 
Show => Anzeigen
Hide => Verstecken
WLAN Mode => Betriebsmodus
Access Point => Access Point
Client => Client
Bridge => Bridge
Ad-Hoc => Ad-Hoc
Encryption Settings => Verschlüsselungseinstellungen
Encryption Type => Verschlüsselungsart
PSK => Passwort
WPA Mode => WPA-Modus
WPA Algorithms => WPA-Verschlüsselungsalgorithmen
WEP Keys => WEP-Schlüssel


# 'Advanced Wireless Configuration' page
Advanced Wireless Configuration => WLAN-Konfiguration (erweitert)
WDS Connections => WDS-Verbindungen
MAC Filter List => Zugriffsbeschränkung (MAC-Adresse)
Filter Mode => Filtermodus
Allow => Erlauben
Deny => Verweigern
Set => Setzen
Settings => Einstellungen
Automatic WDS => Automatische WDS-Verbindung

# "Hosts" page

MAC Address => MAC-Adresse
Configured Hosts => Konfigurierte Hosts
DHCP Static => Statische DHCP-Einträge
Host Names => Host-Einträge


Up => Hoch
Down => Runter
Edit => Bearbeiten
Delete => Löschen
Save => Speichern
Cancel => Abbrechen

Forward => Weiterleiten
Accept => Zulassen
Drop => Verweigern

Firewall => Firewall
Firewall Rules => Firewall-Regeln
Firewall Configuration => Firewall-Konfiguration

New Rule => Neue Regel
Match => Filter
Target => Ziel
Port => Port

Protocol => Protokoll
Source IP => Quell-IP
Destination IP => Ziel-IP
Source Ports => Quell-Ports
Destination Ports => Ziel-Ports

Forward to => Weiterleiten an
Port => Port

Helptext ESSID => Name des Funknetzwerks
Helptext DNS save => Sie müssen Ihre Änderungen an dieser Seite speichern, bevor Sie DNS-Server hinzufügen oder entfernen

Helptext Operation mode => Setzt den Betriebsmodus für das  WLAN-Interface. Die Einstellung 'Client (Bridge)' ändert nichts an den eigentlichen Netzwerkeinstellungen, es ändert lediglich einige Parameter im WLAN-Treiber, damit man das Interface eingeschränkt in einer Bridge verwenden kann.
Helptext Encryption Type => 'WPA (RADIUS)' wird nur im Access-Point-Modus unterstützt. <br /> 'WPA (PSK)' funktioniert nicht im Ad-Hoc-Modus. 
Helptext IP Settings => IP-Einstellungen sind optional für DHCP und PPTP. Wenn sie gesetzt sind, werden sie als Standardwerte verwendet, falls kein DHCP-Server erreichbar ist. 
Helptext Idle Time => Wartezeit in Sekunden, nach der bei Inaktivität die Internetverbindung getrennt wird.
Helptext Redial Timeout => Maximale Zeit, die der Router auf Antwort vom Provider warten soll, bevor die Verbindung neu aufgebaut wird.



## new format
## you are free to translate the part between "new format comments"
## replace any text after "=" and ">" with your translation


## network hosts
network_hosts_host_IP_invalid => Host's IP Address
network_hosts_Host_Name => Hostname
network_hosts_MAC => MAC-Adresse
network_hosts_static_IP_invalid => Static IP Address
network_hosts_Configured_Hosts => Konfigurierte Hosts
network_hosts_Host_Names => Host-Einträge
network_hosts_IP => IP Address
network_hosts_Remove => Entfernen
network_hosts_Add => Hinzufügen
network_hosts_Host_Names_helptext => The file /etc/hosts is used to look up the IP address of a device connected to a computer network. The hosts file describes a many-to-one mapping of device names to IP addresses. When accessing a device by name, the networking system attempts to locate the name within the hosts file before accessing the Internet domain name system.
network_hosts_DHCP_Static_IPs => Static IP addresses (for DHCP)
network_hosts_Static_IPs => Static IP addresses
network_hosts_Static_IPs_helptext => The file /etc/ethers contains database information regarding known 48-bit ethernet addresses of hosts on an Internetwork. The DHCP server uses the matching IP address instead of allocating a new one from the pool for any MAC address listed in this file.
network_hosts_Active_Leases => Active DHCP Leases
network_hosts_Name => Name
network_hosts_Expires => Gültigkeitsdauer
network_hosts_h => h
network_hosts_min => min
network_hosts_sec => sec
network_hosts_No_leases => There are no known DHCP leases.
Network => Netzwerk
Hosts => Host-Konfiguration


## status-leases.sh
Status => Status
DHCP Clients => DHCP Clients
status_leases_dhcp_leases => DHCP-Leases
status_leases_MAC => MAC-Adresse
status_leases_IP => IP-Adresse
status_leases_Name => Name
status_leases_Expires => Gültigkeitsdauer
status_leases_h => h
status_leases_min => min
status_leases_sec => sec
status_leases_no_leases => There are no known DHCP leases.
status_leases_dhcp_leases => DHCP Leases
status_leases_dhcp_leases_helptext => DHCP leases are assigned to network clients that request an IP address from the DHCP server of the router. Clients that requested their IP lease before this router was last rebooted may not be listed until they request a renewal of their lease.
status_leases_additional => Additional information
status_leases_arp_title => Address Resolution Protocol Cache (ARP)
status_leases_HW => HW Type
status_leases_Flags => Flags
status_leases_Mask => Mask
status_leases_completed => completed
status_leases_permanent => permanent
status_leases_published => published
status_leases_no_arp_record => ARP Cache does not contain any correspondent record.
status_leases_ethers_title => Ethernet Address to IP Number Database (/etc/ethers)
status_leases_ethers_empty => File /etc/ethers does not contain any Ethernet address/IP address pair.
status_leases_no_ethers => File /etc/ethers does not exist.


## status-usb.sh
status_usb_umount_error_in => Error in
Status => Status
USB => USB
status_usb_USB_Devices => USB Devices
status_usb_All_connected_devices => All connected devices (excluding system hubs)
status_usb_Bus => Bus
status_usb_Device => Device
status_usb_Product => Product
status_usb_Manufacturer => Manufacturer
status_usb_VPIDs => VendorID:ProdID
status_usb_USB_version => USB version
status_usb_Mounted_USB_SCSI => Mounted USB / SCSI devices
status_usb_filesystems => File systems
status_usb_Device_Path => Device Path
status_usb_Mount_Point => Mount Point
status_usb_File_System => File System
status_usb_Read_Write => Read/Write
status_usb_Action => Action
status_usb_ro => Read only
status_usb_rw => Read/Write
status_usb_umount => umount
status_usb_swaps => Swaps
status_usb_swap_PartitionFilename => Partition/Filename
status_usb_swap_Type => Type
status_usb_swap_Size => Size
status_usb_swap_Used => Used
status_usb_swap_Priority => Priority
status_usb_swap_partition => partition
status_usb_swap_file => file
status_usb_Loaded_USB_drivers => Loaded USB drivers


## status-wwaninfo.sh
Status => Status
UMTS => UMTS
status_wwaninfo_UG_Status => UMTS/GPRS Status
status_wwaninfo_no_UG_device => UMTS / GPRS device not found.
status_wwaninfo_device_info => Device Information
status_wwaninfo_dev_th_Information => Information
status_wwaninfo_dev_th_Value => Value
status_wwaninfo_no_UG_device_info => No device information reported.
status_wwaninfo_Signal_Quality => Signal Quality
status_wwaninfo_quality_unknown => Signal quality is invalid/unknown
status_wwaninfo_Power_Ratio => Power Ratio (dBm)
status_wwaninfo_Legend => Legend
status_wwaninfo_quality_Unreliable => Unreliable
status_wwaninfo_quality_Workable => Workable
status_wwaninfo_quality_Good => Good
status_wwaninfo_quality_Excellent => Excellent
status_wwaninfo_wrong_value => Wrong signal quality value


## new format


## system-ipkg.sh
system_ipkg_installedpackages => Installierte Pakete
system_ipkg_updatelists => Paketlisten aktualisieren
system_ipkg_Uninstall => Deinstallieren
system_ipkg_Install => Installieren
system_ipkg_availablepackages => Verfügbare Pakete



# untranslated:
Device Status => Gerätestatus

qos_enabled => Aktiviert
qos_adv_enabled => Aktiviert
qos_disabled => Deaktiviert
qos_adv_disabled => Deaktiviert
