swayfx (0.6.1-1) unstable; urgency=medium

  * New upstream release 0.6.1 (FZ-8370), a bugfix release on the same
    scenefx 0.5 and wlroots 0.20: no crash moving a fullscreen split to
    another output, dimming on client-decorated windows, no shadows when
    there are no gaps, a workspace that moved outputs no longer fades out,
    a fullscreen window no longer hides the next workspace, and animation
    timing follows an output's refresh rate when it changes. The default
    config drops a duplicate brightness binding. Upstream reverted
    ultrawide mode before the tag, so it does not ship.
  * debian/patches/0005 (scratch slide, FZ-9442): refreshed. 0.6.1 reworked
    the crossfade branch of arrange_output() that the slide hooks into, so
    the hunk only applied with fuzz. Both slides now stay off when the
    workspace this output showed has moved to another one, and the
    crossfade leaves that workspace's slide alone, the way 0.6.1 leaves
    its alpha to the output that shows it. Before, moving the active
    scratch workspace to another output slid it up out of view there.
    The other five patches apply as they are.

 -- Clay Risser <clayrisser@gmail.com>  Sat, 14 Nov 2026 18:54:45 +0000

swayfx (0.6-4) unstable; urgency=medium

  * debian/patches/0006: add animation_close_duration_ms (FZ-9445), the
    duration of a closing window's animation on its own, so a close can be
    quicker than an open the way Omarchy's Hyprland closes. 0, the default,
    keeps the close on animation_duration_ms, so a config without it behaves
    as before. Upstream's per-event durations (wlrfx/swayfx#584) would
    replace it.

 -- Clay Risser <clayrisser@gmail.com>  Wed, 04 Nov 2026 01:10:58 +0000

swayfx (0.6-3) unstable; urgency=medium

  * debian/patches/0005: slide the workspace named "scratch" vertically
    instead of crossfading it (FZ-9442). Switching to it slides it down from
    the top of the output over the workspace it replaces, and switching away
    slides it back up, the way Hyprland draws Omarchy's special workspace.
    Based's Super+S goes there. Every other switch keeps the crossfade, and
    the slide uses animation_duration_ms, so no new directive.

 -- Clay Risser <clayrisser@gmail.com>  Wed, 04 Nov 2026 00:33:50 +0000

swayfx (0.6-2) unstable; urgency=medium

  * debian/patches/0004: create a workspace on the fallback output instead
    of aborting in select_workspace() when a window maps and no workspace
    exists (FZ-8586). With the laptop's only output off and nothing open,
    output_evacuate() had destroyed every workspace, and mapping the RustDesk
    window took the session down with SIGABRT. Carries sway PR #9266, still
    open upstream (swaywm/sway#8811).

 -- Clay Risser <clayrisser@gmail.com>  Sat, 31 Oct 2026 08:42:58 +0000

swayfx (0.6-1) unstable; urgency=medium

  * New upstream release 0.6 (FZ-8444): rebased on sway 1.12, with
    animations (animation_duration_ms) and a new blur node. Builds
    against scenefx 0.5 and wlroots 0.20.
  * Drop patches upstream now carries: DesktopNames in sway.desktop, the
    listener teardown on exit (BASED-436, sway 1.11), and the gamma
    reset fallback (BASED-1100), since 0.6 hands gamma to the scene and
    output.c no longer applies it.
  * debian/patches/0003 (night_light, BASED-867): forward-ported.
    wlroots 0.20's software gamma fallback needs a renderer SceneFX does
    not have, so the scene tint is still the route on Asahi.
  * debian/control: libscenefx-0.5-dev, libwlroots-0.20-dev, wayland-
    protocols 1.41.

 -- Clay Risser <clayrisser@gmail.com>  Fri, 30 Oct 2026 15:55:51 +0000

swayfx (0.5.1-9) unstable; urgency=medium

  * debian/patches/0006: drop a gamma reset the output cannot take
    (BASED-1100). The first repaint after an output is powered back on
    re-applies gamma, which with no gamma client is a reset, and a CRTC
    with no gamma LUT (virtio-gpu, Apple's DCP) cannot take one: the
    fallback committed the same reset and failed, "Page-flip failed" once
    per power-on and the first frame after it never presented. The frame
    now commits without touching gamma when the reset fails the test.

 -- Clay Risser <clayrisser@gmail.com>  Fri, 25 Sep 2026 20:20:33 +0000

swayfx (0.5.1-8) unstable; urgency=medium

  * Build for Ubuntu 26.04 (resolute) too (BASED-948), so the resolute
    sway cells get swayfx from U26Dev. It links scenefx 0.3 and wlroots
    0.18 from this set, since resolute ships wlroots 0.19 only. Noble
    stays off (BASED-289).

 -- Clay Risser <clayrisser@gmail.com>  Thu, 24 Sep 2026 03:25:46 +0000

swayfx (0.5.1-7) unstable; urgency=high

  * debian/patches/0005: compute the night_light gain the way gammastep
    does (BASED-886). 0.5.1-6 multiplied the linear-light sRGB of the
    Planckian whitepoint into gamma-encoded pixels and normalised to the
    Planckian 6500 K point, which is not white: far too red at every
    temperature (GNOME's default 2700 K gave 1.00/0.42/0.10 where
    gammastep gives 1.00/0.68/0.35) and a magenta cast at 6500 K. The
    gain is now Ingo Thies' hybrid locus that gammastep tabulates
    (Planckian to 5000 K, CIE daylight from 6500 K, a linear blend
    between), through XYZ to linear sRGB, encoded with the sRGB transfer
    function and normalised so 6500 K is exactly 1/1/1. It lands within
    about 1% of gammastep's table from 1700 K to 6500 K: 4500 K is
    1.00/0.87/0.74 and 3500 K is 1.00/0.78/0.55.
  * debian/control: build against libscenefx-0.3-dev (>= 0.3-5), which
    redraws a tinted frame whole instead of compounding the gain into the
    pixels it keeps and the ones blur reads back.

 -- Clay Risser <clayrisser@gmail.com>  Wed, 23 Sep 2026 05:36:35 +0000

swayfx (0.5.1-6) unstable; urgency=medium

  * Add debian/patches/0005: a night_light command (BASED-867).
    `swaymsg night_light 4000` warms the whole screen, `night_light off`
    restores it. The temperature becomes the same Planckian-locus
    whitepoint gammastep computes, and SceneFX multiplies it over each
    output's finished image (wlr_scene_set_color_tint, scenefx 0.3-4)
    instead of writing it into a gamma ramp. Apple's DCP carries a CTM
    and no GAMMA_LUT, so wlroots fails every wlr-gamma-control request
    on Asahi and gammastep warms nothing there; upstream refused a
    kernel LUT and GNOME, KWin and Hyprland all answered with a
    compositor-side transform. Direct scan-out is off while it is on.
  * debian/control: build against libscenefx-0.3-dev (>= 0.3-4), the
    revision that has wlr_scene_set_color_tint.

 -- Clay Risser <clayrisser@gmail.com>  Wed, 23 Sep 2026 04:34:51 +0000

swayfx (0.5.1-5) unstable; urgency=medium

  * Backport sway PR #8578 as debian/patches/0004 (BASED-436):
    server_fini() removes the compositor's own listeners before it
    destroys the backend and the display. 0.5.1 is sway 1.10.1
    underneath and segfaulted on every system poweroff, jumping through
    a stale listener in wlr_backend_destroy. The same patch took sway
    1.10.1-2+based2 from three crashes in three poweroffs to a clean
    exit. swayfx 0.5.2 has the fix upstream but needs wlroots 0.19,
    which trixie cannot build.

 -- Clay Risser <clayrisser@gmail.com>  Tue, 22 Sep 2026 05:59:05 +0000

swayfx (0.5.1-4) unstable; urgency=medium

  * debian/rules: strip -Wl,-Bsymbolic-functions from LDFLAGS
    (BASED-260). Ubuntu's dpkg-buildflags adds it and Debian's does
    not, so swayfx now links with the same flags on every base. The
    flag only affects a shared library's own symbol binding and is
    inert on this executable; the crash BASED-260 found was fixed
    where it lives, in the wlroots library build
    (basedlinux.com/debian/wlroots 0.18.2-3~based2 for noble).
    Ubuntu's own wlroots carries the flag, so any future swayfx line
    on an Ubuntu base needs a wlroots rebuilt without it as well.
  * Ubuntu 26.04 (resolute) stays disabled, verified on Launchpad
    2026-09-13: resolute ships wlroots 0.19.2-1 and no
    libwlroots-0.18-dev, and this 0.5.1 + scenefx 0.3 line needs
    wlroots 0.18 (0.5.2/0.5.3 + scenefx 0.4 is the wlroots 0.19 line,
    which trixie cannot build). One debian/unstable source cannot
    serve both bases (BASED-275).

 -- Clay Risser <clayrisser@gmail.com>  Sun, 13 Sep 2026 07:21:02 +0000

swayfx (0.5.1-3) unstable; urgency=medium

  * Do not build for Ubuntu 24.04 (noble) or 26.04 (resolute) (BASED-289).
    No noble cell composes swayfx since BASED-279. On resolute this source
    cannot resolve: it needs scenefx 0.3 and wlroots 0.18, and resolute ships
    wlroots 0.19 (BASED-275). Debian 13 builds as before.

 -- Clay Risser <clayrisser@gmail.com>  Sat, 12 Sep 2026 23:25:10 +0000

swayfx (0.5.1-2) unstable; urgency=medium

  * Build for Ubuntu 24.04 (noble) as well as Debian 13 (BASED-199).
  * Drop OBS_DISABLE_REPOSITORIES: xUbuntu_24.04. The source needs no
    change: noble lacked wlroots 0.18, scenefx 0.3 and libinput >= 1.26,
    and basedlinux.com/debian/{wayland,wlroots,libinput} now supply the
    first and the third in the same OBS project. Proven by a full build
    in an ubuntu:noble container against that stack.

 -- Clay Risser <clayrisser@gmail.com>  Fri, 11 Sep 2026 09:00:17 +0000

swayfx (0.5.1-1) unstable; urgency=medium

  * Initial release.
  * Pinned to upstream tag 0.5.1, which is the newest SwayFX that targets
    wlroots >=0.18.0 <0.19.0 and scenefx-0.3. Debian trixie ships wlroots
    0.18.2, so later releases do not apply: 0.5.2/0.5.3 need wlroots 0.19
    and scenefx-0.4, and 0.6 needs wlroots 0.20 and scenefx-0.5.
  * 0.5.1 is rebased on sway 1.10.1 (upstream's `original_version`), which is
    exactly the sway trixie ships, so config and IPC compatibility is exact.
  * Declared Provides/Conflicts/Replaces on sway so this is a drop-in swap
    rather than a parallel install; see the rationale in debian/control.
  * Built with -Ddefault-wallpaper=false to leave sway-backgrounds
    co-installable, and carried the three Debian-parity patches src:sway
    applies (zsh completion directory, default config wallpaper line,
    DesktopNames in sway.desktop).
  * Shipped /etc/sway/config.d/50-systemd-user.conf and the xdg-desktop-portal
    preference file from src:sway, so replacing sway does not silently drop
    systemd user-session and portal integration.

 -- Clay Risser <clayrisser@gmail.com>  Thu, 13 Aug 2026 07:23:01 +0100
