Package: block-badips Version: 0.8.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 56 Depends: bash, ipset, iptables, curl | wget, util-linux, grep, coreutils, sed, gawk | mawk Suggests: bash-completion Filename: all/block-badips_0.8.0-1_all.deb Size: 17064 MD5sum: 4e94b431297f57b7d11919f68ce30e79 SHA1: be381a65c824ea56cc4e35519148737a6aa61e6c SHA256: 4c8bee89a2c9069538d62843b660dce6f563aa31df3900326cce3f1c14fad0cf Section: net Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Block IPs of known brute-force attackers Downloads a list of IPv4 and IPv6 addresses and ranges, by default from blocklist.de, loads it into ipsets and drops their traffic with one iptables rule per address family in the PREROUTING chain of the raw table. Invalid, too broad or suddenly much shorter lists are refused. Package: blocklist-updater Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 57 Depends: python3 (>= 3.9) Suggests: bash-completion Filename: all/blocklist-updater_0.2-1_all.deb Size: 13476 MD5sum: dde97c29c91157deaa534d1006867bca SHA1: 709fd860896c97c25553dc4351fc1434dcf2c63e SHA256: 923a9ad09ca44a0c2b2111f2e6d680b3296967c1268606a5ff49f364b664c8a6 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/blocklist-updater Description: Download, validate and merge IP blocklists Downloads IP blocklists from several providers (Spamhaus DROP, AbuseIPDB, blocklist.de, CINS Army, Emerging Threats, GreenSnow, DShield and others), validates them and merges them into one list, e.g. for block-badips. Broken downloads keep the previous list, private, reserved and own networks are never published, and stale lists age out. . Each provider is a section in /etc/blocklists/blocklists.conf and is switched on by enabling its timer update-blocklist@
.timer. No unit is enabled on installation; the units run as www-data. Package: cron-check-nagios Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: monitoring-plugins-nagios, mailx, cron Filename: all/cron-check-nagios_0-0_all.deb Size: 2958 MD5sum: b18ea946096d97ca41c7f5dc179aff6a SHA1: 52c5cad584ca3313ee495ba05d748264a775b88b SHA256: 87a9e208f7c23dbd6e493595f6e5eadec2c61c4481ab12d22ed09e9851f221a2 Section: libs Priority: optional Description: Provides a script that can be executed via cron to see if nagios is still up and running. If nagios is down or last log entry longer than a minute ago, a mail is sent to root. Package: iipsrv Version: 1.3-1 Architecture: amd64 Maintainer: Thomas Wagner Installed-Size: 477 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, libavif16 (>= 1.3.0), libc6 (>= 2.43), libfcgi0t64 (>= 2.4.5), libgcc-s1 (>= 3.3.1), libgomp1 (>= 4.9), libjpeg8 (>= 8c), libmemcached11t64 (>= 1.1.4), libopenjp2-7 (>= 2.0.0), libpng16-16t64 (>= 1.6.46), libstdc++6 (>= 11), libtiff6 (>= 4.0.3), libwebp7 (>= 1.5.0), libwebpmux3 (>= 1.5.0) Filename: amd64/iipsrv_1.3-1_amd64.deb Size: 188496 MD5sum: 0d12cde5d43a63488c572e7f46266d07 SHA1: 40330a754ddd2a08e10136c2ae33bdbd8de757dd SHA256: cf07d803a0cd2e96c46262933328d920f83e80b088e80b6a1efee56cefa04534 Section: web Priority: optional Homepage: https://iipimage.sourceforge.io Description: IIPImage server for high resolution images iipsrv is a fast FastCGI image server for streaming and dynamically transforming high resolution and scientific images. It speaks the IIP, IIIF, Zoomify and DeepZoom protocols and reads tiled multi-resolution TIFF and JPEG2000 images; output can be JPEG, PNG, WebP, AVIF or TIFF. . It runs behind a web server such as Apache, nginx or lighttpd through FastCGI. The iipsrv.service unit starts it as a standalone FastCGI daemon listening on port 9000; settings go to /etc/default/iipsrv. . This is a newer upstream release than the iipimage-server package of the distribution, installed as /usr/sbin/iipsrv. Package: journald-remote-follower-rsyslog Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 40 Depends: python3 (>= 3.7), python3-systemd, systemd-journal-remote Recommends: rsyslog-relp Filename: all/journald-remote-follower-rsyslog_0.1-1_all.deb Size: 9646 MD5sum: 18db0303cbc736933126e8167d4c7abf SHA1: 3347a9ebf5e3ff199db9daf37965019da144ea35 SHA256: 1ddd9456ef46b9f1d31faa78b69e6ff05831f10b0aacd4b3c223124e93ba4a00 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/journald-remote-follower-rsyslog Description: Forward systemd-journal-remote journals to rsyslog in arrival order rsyslog's imjournal with Remote="on" merges the local and the remote journals by time and skips entries that are uploaded late. This program reads only the journals that systemd-journal-remote receives, follows them in the order the entries were written and sends every entry to rsyslog's imrelp input. The journal cursor is saved only after rsyslog acknowledged the entries, so delivery is at least once. A backfill mode sends the entries of a time range that are missing from rsyslog's per-host files. . The service is installed but not enabled; rsyslog has to be configured first, see the example in the documentation. Package: kvm-guest-update Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: bash (>= 4), coreutils, jq, libvirt-clients, bsdutils Suggests: bash-completion Filename: all/kvm-guest-update_0.3-1_all.deb Size: 14842 MD5sum: c76b706e35086cfe3436966a33c45279 SHA1: 73ce8ffd0619ac3f85292ed2f56c3ff56309a16c SHA256: 737d5a9109a41c35a3a2678ffd4298bb157580eb66985302b95899720485a379 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/kvm-guest-update Description: Update Debian and openSUSE Leap VMs through the QEMU guest agent Updates the running Debian and openSUSE Leap VMs of a KVM host through the QEMU guest agent, so no SSH access or password is needed in the VMs. . Each VM is checked before its upgrade and skipped if the package manager would ask a question (changed conffiles, dependency problems, packages to be removed, licenses). Skipped VMs are logged with priority err for a log monitor. Afterwards every VM is checked for a needed reboot; VMs are never rebooted. The upgrade runs in each VM as a transient systemd unit, so it finishes even when the guest agent is upgraded or the script interrupted. Hooks in the VMs can run commands before and after the upgrade. Package: logherald Version: 0.3.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 118 Depends: python3 (>= 3.7), python3-yaml, systemd Recommends: go-sendxmpp Suggests: bash-completion, rsyslog Filename: all/logherald_0.3.2-1_all.deb Size: 32232 MD5sum: f9ec1dc4f58ec6b7575e44527f4ef18b SHA1: a76e0ea05d1a964b137da74cc0b68eaaf3a14a49 SHA256: 69b8867f661441aa3dcf16fde2aa0040ef8ac5b1e1bf76c2b5ce7dc7c671d9a1 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/logherald Description: Filtered log messages by mail and XMPP, as digests and in batches Selects log messages by severity and by include and exclude rules on host, program, facility, message and systemd unit, and sends them by mail and XMPP (go-sendxmpp). "logherald digest" sends a digest of a time span from the systemd journal and the files rsyslog writes, with messages in both counted once; a systemd timer runs it every hour, not enabled by default. "logherald stream" reads the messages rsyslog's omprog writes to its stdin and sends them in batches, after a number of messages or seconds; an example rsyslog configuration is included but not activated. Package: monitoring-plugins-apcaccess Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: apcupsd, python3 Filename: all/monitoring-plugins-apcaccess_0-0_all.deb Size: 3420 MD5sum: 9a52dbc1e638c4b0e1a2acc5c4871cb1 SHA1: e486dee815be7f6eba04a748f936327ba85bb54a SHA256: d40eb720944715eb2d5d7fb9a0c45b4c2f9e8dc864c47bc0addd409273acf78a Section: libs Priority: optional Description: Uses apcaccess to retrieve data from a running apcupsd. Package: monitoring-plugins-bareos-job Version: 1.2-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 271 Depends: python3 (>= 3.7), python3-psycopg2 Filename: all/monitoring-plugins-bareos-job_1.2-2_all.deb Size: 231240 MD5sum: 69473e4ade4c8df7449a004dfc5486c0 SHA1: fee48c7965d56fed53b23272824b59f6b5030493 SHA256: 52a2c90e3a982654d54f4e6342298780dc79aed27b22306213da0247dcf2e41e Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-job Description: Nagios/Icinga plugin to check a Bareos backup job Checks a specific Bareos backup job via the Bareos PostgreSQL catalog, optionally only its most recent run, and reports files, size, duration and age as performance data. Package: monitoring-plugins-bareos-pool Version: 1.0-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 43 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-pool_1.0-2_all.deb Size: 14650 MD5sum: b7f46a5bb13c2dc3857859e59bbe3157 SHA1: fa8cbda82b32cbe5faadc65d3c98bcf7c13ebc17 SHA256: 60ceb1db92cfbb7368663918f54c5fdc902c2162404c562a57f8827916735b58 Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-pool Description: Nagios/Icinga plugin to check the tapes in Bareos pools Checks the number of tapes in a Bareos pool via the Bareos PostgreSQL catalog, and the number of volumes overdue for recycling back to the scratch pool. check_bareos_pool_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-bareos-tape Version: 1.1-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-tape_1.1-2_all.deb Size: 14972 MD5sum: 99e3f9e0afae1f634bed9d9c3e2d7828 SHA1: 1a81bd1d4822a3d6a096ded16f371df110cc98f9 SHA256: 42a4ef06a2816cf4feb6a5430e54b4777ea1b370afd67aedb5dfbdf0418b6ded Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-tape Description: Nagios/Icinga plugin to check the lifecycle of Bareos tapes Checks the lifecycle state of Bareos tape volumes via the Bareos PostgreSQL catalog: recycle count, mount count, write errors, tape age and volume status. check_bareos_tape_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-block-badips Source: block-badips Version: 0.8.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 24 Depends: sudo, bash, grep, ipset, iptables Suggests: bash-completion Filename: all/monitoring-plugins-block-badips_0.8.0-1_all.deb Size: 5372 MD5sum: 1d7e716c38c2dc5e9236bb469677195e SHA1: bb82994bb23d6138a3b57d2a93449883b92f3dd1 SHA256: 82a77490b47d2e09b5e386c77775a22fee14a895e6e9fa023f4a10da584cf7d1 Section: libs Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Nagios/Icinga plugin to check the blocklists of block-badips Checks the number of blocked entries, the age of the last update, ipsets that no rule uses and nearly full ipsets. A sudoers snippet for the user nagios is included. Package: monitoring-plugins-btrfs-sysfs Version: 0.4-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 45 Depends: python3 (>= 3.7), util-linux Recommends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-btrfs-sysfs_0.4-1_all.deb Size: 13968 MD5sum: 3e254395b09c43d653b21cb35e28db18 SHA1: 4e69289c5e8155f279dcb52887f06d625a5631a1 SHA256: 152e65b6dc9777704f6cbef65abede42af6e05694485b1f76e6b0d50a8a3227a Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/check_btrfs_sysfs Description: Nagios/Icinga plugin to check btrfs space and device errors without root Monitoring plugin for btrfs file systems. It reads /sys/fs/btrfs, which every user can read, so it needs no root, no sudo and no btrfs ioctls. It checks the local machine, or a remote host over SSH, where nothing has to be installed. . It checks the unallocated space, the metadata usage including the global reserve, optionally the data usage, the error counters of each device and the quota (qgroup) limit of the mounted subvolume, and hints at a balance when allocated data chunks are mostly unused. Package: monitoring-plugins-cups-printer Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: cups-client Filename: all/monitoring-plugins-cups-printer_0-0_all.deb Size: 3090 MD5sum: d26483e93f36564e5f6e1f3c9bb7a655 SHA1: c6d4ff44b14c6ac2f0a04575d57679e63cdfa874 SHA256: 65104f1af36cdf1ff77ddbcf5a0e8f8632bc885c8c2a0f847b5b906df56915e2 Section: libs Priority: optional Description: Checks if cups provides a certain printer. Package: monitoring-plugins-cups-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: cups-client Filename: all/monitoring-plugins-cups-queue_0-0_all.deb Size: 4302 MD5sum: 3eb284a670d4f7abe5b182fb38f3ab3e SHA1: 45f17b60ad136004f284712c2c194f0430470018 SHA256: 3d46aa01b0409f55bb38005a83268c7a73239f154d3282726b6dc47e2819e9c8 Section: libs Priority: optional Description: Checks the length of a printer queue in cupsd. Package: monitoring-plugins-dd-wrt-inet-access Source: monitoring-plugins-dd-wrt Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-dd-wrt-inet-access_0.2-1_all.deb Size: 3304 MD5sum: 30bfac9924a7b6af7ed20728bcb293ca SHA1: 1ece37d936541c38dbb2b6235f12486071830136 SHA256: f50b86b3bf6f239b57540a33153927c3ad5ec7c083db7c9523a191ca7b7a473f Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check if a router running dd-wrt has internet connection Logs in via ssh on a router running dd-wrt and tries to access a certain website with w3m to check if internet access is given. Package: monitoring-plugins-dd-wrt-ps Source: monitoring-plugins-dd-wrt Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-dd-wrt-ps_0.2-1_all.deb Size: 3430 MD5sum: ce9ab4b0188adede1f9e7b46b78304d3 SHA1: 85afc9bf6c577bbaa37e1df5d491888687a65526 SHA256: a3d107defeb840e1b10caea39366948439d85527ba7dadbe453936301b1068b0 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check running processes on a dd-wrt router Logs in via ssh on a router running dd-wrt and checks with a list of given processes if all of them are running. Package: monitoring-plugins-dns-pl Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Filename: all/monitoring-plugins-dns-pl_0-0_all.deb Size: 9396 MD5sum: 034e4d04c0510028a0d9c625a868a3ee SHA1: 6aa2a68867ac8ebff7ffabaa279bcb955fdbb69f SHA256: 4d4dcf2684e90514a89fc01007530bbe89d11dc9e0a2cc91017956d902369022 Section: libs Priority: optional Description: Uses perl to query a DNS server and checks the response. See https://github.com/thorfi/nagios-bind9-plugin. Package: monitoring-plugins-esphome-sensor Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 55 Depends: python3 (>= 3.8), python3-requests Recommends: python3-aioesphomeapi Suggests: bash-completion Filename: all/monitoring-plugins-esphome-sensor_0.3.1-1_all.deb Size: 15554 MD5sum: 32e9f3af881fa72e12dea487f5c53884 SHA1: f2c3a8ff46b4b576c73ee886d789a7e937eb99a3 SHA256: c9941924ef95091f4296bc0c66dc9ff1eea8ab8acbad52bc6f3c3ae0e806fff6 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_esphome_sensor Description: Checks ESPHome devices via the native API or web_server v3 Checks ESPHome devices via either the web_server (version 3) HTTP JSON API (with optional HTTP basic auth) or the native API component (with optional plaintext password or Noise PSK encryption key). Supports checking a numeric sensor/text_sensor value against thresholds (-c may be smaller than -w), the time offset of a sensor against the local clock or an NTP server, and a boolean expression over multiple binary_sensor entities. --mode api additionally requires the python3 module aioesphomeapi to be installed separately. Package: monitoring-plugins-exim-queue Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: exim4-daemon-light | exim4-daemon-heavy Recommends: sudo Suggests: bash-completion Filename: all/monitoring-plugins-exim-queue_0.1-1_all.deb Size: 5512 MD5sum: 08c2f0087e7cae5e1ae91732ff9e1d53 SHA1: ff1765a73aab11c9ccb3b032fee85dfcfa13be68 SHA256: ba6e7506cdd0399704fc33755635e09aeebbb6e42aab87d797dd790a57ed59f9 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_exim_queue Description: Nagios/Icinga plugin to check the exim mail queue Checks the exim mail queue: the number of messages, and optionally frozen messages and the age of the oldest message, with thresholds for each and all values in the performance data. As only exim admin users may list the queue, it can run exim with sudo. Package: monitoring-plugins-file-age2 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Filename: all/monitoring-plugins-file-age2_0-0_all.deb Size: 3724 MD5sum: fd134d5f34476d075b9bf9ab998f8b3d SHA1: d17a1a5ea5ae0b563473af736e0631744216d867 SHA256: d7034b4568c25bf2a361885a8a3153dbe894af10ff60eff712758dc2338166c0 Section: libs Priority: optional Description: Check file age and size but has a mode to not report error on missing files. Thus file-age2 is suitable for lock files. Package: monitoring-plugins-file-exists Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Filename: all/monitoring-plugins-file-exists_0-0_all.deb Size: 2796 MD5sum: 8d13700e59ccf894085666d52d954c56 SHA1: fcae606aebe58da50c6dbc449782afed2e5747aa SHA256: 1785f40dfd0bc7639771c35c55d526b69e1cda085eb6978d57cc15afa3afb3f9 Section: libs Priority: optional Description: Uses test command to check if a file exists. Can also be used for device files /dev/*. Package: monitoring-plugins-fileage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3 Filename: all/monitoring-plugins-fileage_0-0_all.deb Size: 3876 MD5sum: 4723fc88cc5c055e34ccd6de2871577e SHA1: 1f0d1baff9b9c42c377ab43a651053a1020cf15d SHA256: 8679b657a17734cac8d8518a7a3800cab25b74ea77de2f7ab672893afa8b0227 Section: libs Priority: optional Description: Checks if a file is younger than a certain age. Useful for checking arbitrary daemons that write to files periodically. Package: monitoring-plugins-flexlm-server Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 35 Depends: python3 (>= 3.7) Recommends: openssh-client Suggests: bash-completion Breaks: monitoring-plugins-flexlm (<< 1) Replaces: monitoring-plugins-flexlm (<< 1) Filename: all/monitoring-plugins-flexlm-server_0.3-1_all.deb Size: 10280 MD5sum: 1eae1fce1594d1378d5bcbff2b812dd2 SHA1: b7b48f1aa32a44bdb93df1d45ec65e06885c4312 SHA256: 1fc6f03a144f24d07f4c39f421f17c45acf3e206ff3bd744a49a3b18c4ae91c2 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_flexlm_server Description: Nagios/Icinga plugin to check FlexLM license servers Nagios/Icinga plugin that checks a FlexLM (FlexNet Publisher) license server with lmutil, written in Python 3 with the standard library only. . It checks that the license server and all vendor daemons are up, reports the usage of every feature as performance data, and alerts on the days until the earliest expiry of any feature. lmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-folder Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: libmonitoring-plugin-perl Filename: all/monitoring-plugins-folder_0-0_all.deb Size: 4726 MD5sum: 3af9cad812d58cc34d21147f2253f068 SHA1: 6aa0faf5405b04b0943a85356f80cef7dd5b7ad9 SHA256: 2e2c1c5b34fdba0039076d74770062756da6498c087685744f8f0488541ac579 Section: libs Priority: optional Description: Checks files in a given folder for count, total size and age, using thresholds in monitoring-plugins format. Package: monitoring-plugins-ftp Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-ftp_0-0_all.deb Size: 3462 MD5sum: 6cb76d013e0669d532037ef41d0c60d7 SHA1: 191356331a95f4d5f46e695272db0db3b004a133 SHA256: 6f978f82aa5277ea9c232c495419a519d210cc06e2669394b62b3d666ebeab57 Section: libs Priority: optional Description: Checks if an ftp server is up and running by logging in. Package: monitoring-plugins-gitlab Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 38 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-gitlab_0.3-1_all.deb Size: 11932 MD5sum: 4b157c609124d65697c7894927123dcd SHA1: f2d5e83bd9b997e87fd8c34aaf8521eb5d4f144b SHA256: cfb737682211186ceb3aa0b6b7a89bcc3852ec7f5e4c925fbe042769fb19c1ec Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_gitlab Description: Nagios/Icinga plugin to check a GitLab instance Nagios/Icinga plugin for GitLab, written in Python 3 with the standard library only. It queries the GitLab REST API, so the monitoring host needs nothing but network access and an access token. . Modes: * health: does the API answer, which version runs, and how fast * token: how many days the monitoring token itself is still valid * stats: users, projects, groups, issues and merge requests * sidekiq: background job processing and backlog * migrations: failed or unfinished batched background migrations * rotate: renews the access token before it expires, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-hassio Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3, python3-requests Filename: all/monitoring-plugins-hassio_0-0_all.deb Size: 4110 MD5sum: b9a4324f64c4c164efe192f4eae2f0cf SHA1: 626b4eb3b16f5f089e2f6c45e6b0ee874ae62fec SHA256: ff25da589775aad6da15b6d4234277777116b221bfde5f73496009341a554fcb Section: libs Priority: optional Description: Queries sensors of a Home Assistant instance via its REST API and compares their states against expected string, timestamp or numeric values. Package: monitoring-plugins-homeassistant-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 47 Depends: python3 (>= 3.8) Suggests: bash-completion Filename: all/monitoring-plugins-homeassistant-sensor_0.2.1-1_all.deb Size: 13436 MD5sum: 4920bbe32716c3a608c95487dae3d643 SHA1: d846e9928ccb59a9050f69545c5cf0ad001787ae SHA256: 90616878d00ee65ee4d6e210267332c7c1de53d5468a2022b8e0de7554e8f6a3 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_homeassistant_sensor Description: Checks Home Assistant entities via its REST API Checks Home Assistant entities via its REST API, with a long-lived access token. Supports checking a numeric state or attribute against thresholds (-c may be smaller than -w), that one entity stays above or below another by a margin (e.g. a wall temperature above the dew point), how long ago an entity last reported, the time offset of a timestamp entity, a boolean expression over on/off entities, and a regular expression against a state. Unavailable entities are CRITICAL by default. Package: monitoring-plugins-immich Version: 0.4.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 35 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-immich_0.4.1-1_all.deb Size: 10414 MD5sum: ac6c768e4e47cce25d526e3dadaea25b SHA1: 375c8d634ca47416208829bc99b9fc9a0f536491 SHA256: b3c688282e81fc7d58f569c4ef6515b4903170666d5c3fb8d10d698c1ab38f90 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_immich Description: Nagios/Icinga plugin to check an Immich instance Nagios/Icinga plugin for Immich, written in Python 3 with the standard library only. It queries the Immich REST API, so the monitoring host needs nothing but network access and an API token. . Modes: * health: does the server answer its ping endpoint, and how fast * storage: how much of the storage is used * stats: how many photos and videos are stored, and how much space they use * rotate: gives the API key a new secret, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-influxdb Version: 0.2.1-1 Architecture: amd64 Maintainer: Thomas Wagner Installed-Size: 7904 Depends: libc6 (>= 2.34) Filename: amd64/monitoring-plugins-influxdb_0.2.1-1_amd64.deb Size: 2675928 MD5sum: d15eca4a7c3fc04f831526ff75bffb47 SHA1: 220cf9afc2aacc8639301c6ddef502a220b57a43 SHA256: efd196ed9ef9a7ce122d734edfd9ef8b9483917d8f81a6f4bff3b6481c6b3742 Section: net Priority: optional Homepage: https://github.com/NETWAYS/check_influxdb Description: Nagios/Icinga plugin to check InfluxDB Icinga/Nagios check plugin for InfluxDB written in Go. It can check the health endpoint of an InfluxDB instance and evaluate the result of a Flux query against thresholds. . Both InfluxDB 1.8 (with the /health endpoint) and 2.x are supported. Package: monitoring-plugins-influxdb-data-age Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 36 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-influxdb-data-age_0.2.1-1_all.deb Size: 10328 MD5sum: d6b20e019b9daa4c6ed31b86b11514a7 SHA1: bd9356b2f14fcf909a57ff62cd381816707940c7 SHA256: 2044a6b828845516a8b4b9db863bb90b21984a6d0673666aa477ff6aa46116f8 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_influxdb_data_age Description: Nagios/Icinga plugin to check the age of the newest data in InfluxDB Nagios/Icinga plugin that checks how old the newest data is that an InfluxDB 2 Flux query returns, to catch measurements that stopped arriving. Written in Python 3 with the standard library only. The plugin was check_influxdb_data_age.py in the monitoring-plugins collection; that name is kept as a link. Package: monitoring-plugins-ipmi-power Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: freeipmi, ipmitool Filename: all/monitoring-plugins-ipmi-power_0-0_all.deb Size: 3340 MD5sum: 9ee4d80059578f9afeb771227e53c05c SHA1: 6645cc96b4977a1433c4345becbd406131f29d42 SHA256: f03334f17cc9f007c01df55d13ef546a8537b13c29d0174b976727e62ffa9f44 Section: libs Priority: optional Description: Uses ipmitool from freeipmi to check is a system is powered. Useful as master for service dependencies. Package: monitoring-plugins-ipmi-sensor3 Version: 3.14-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 70 Depends: perl:any, freeipmi-tools (>= 0.5.1), libipc-run-perl Conflicts: monitoring-plugins-ipmi-sensor1, monitoring-plugins-ipmi-sensor2 Filename: all/monitoring-plugins-ipmi-sensor3_3.14-2_all.deb Size: 28044 MD5sum: b428844b63df6bc69f88734363b63b25 SHA1: 672fc5723b7dc6bf60397712cc95cb78dea16bdb SHA256: b4d7ac25f3d69af1aa4c47d6bffcd736bd53d3e920eded6716609eb1e35d4e4b Section: net Priority: optional Homepage: https://github.com/thomas-krenn/check_ipmi_sensor_v3 Description: Nagios/Icinga plugin to check IPMI sensors using FreeIPMI This plugin uses FreeIPMI tools to check IPMI sensors. Sensors can be checked all at once, in groups, or individually. Performance data is provided. Package: monitoring-plugins-isg-wpm-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 62 Depends: python3 (>= 3.8) Suggests: bash-completion Filename: all/monitoring-plugins-isg-wpm-sensor_0.2.1-1_all.deb Size: 17650 MD5sum: e852c5f03aff10c295dc7b0e0950c94d SHA1: e01406c091c8133b871663a36c29d06ab2a2e8b3 SHA256: c7bcc54aa2cd8afdd8764d9d5fd67a3d30681dde721df1f84837be5f4777a8a3 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_isg_wpm_sensor Description: Checks Stiebel Eltron heat pumps with WPM via Modbus TCP of the ISG Checks a Stiebel Eltron heat pump with a heat pump manager WPM (WPMsystem, WPM 3, WPM 3i) via the Modbus TCP interface of the Internet Service Gateway (ISG web with the Modbus TCP/IP software extension). Supports checking a numeric value against thresholds (-c may be smaller than -w), that one value stays above or below another by a margin, a boolean expression over pumps and status bits, a regular expression against a coded value such as the operating mode, and faults and bus errors. The plugin only reads registers. Package: monitoring-plugins-jitsi Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: python3-requests Filename: all/monitoring-plugins-jitsi_0-0_all.deb Size: 4944 MD5sum: 369a5c9739c72d855bcbc0122fd27206 SHA1: e92eb3bd885416abd6740ad471c0675d2b7a7428 SHA256: fad7c13c4466c62cf6137f1ecf4abd5df6267ec4c7270e333320f8551aca017e Section: libs Priority: optional Description: Uses jitsi's JVB API to optain statistics from jitsi services. Package: monitoring-plugins-linux-raid Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Conflicts: nagios-plugins-linuxraid Replaces: nagios-plugins-linuxraid Filename: all/monitoring-plugins-linux-raid_0-0_all.deb Size: 3760 MD5sum: d86bb08382dacceefd98887edebc39c9 SHA1: 432b1ee33ddee521c0b38c035fede23058170806 SHA256: 8a8a1736cff3d3a6a2642a82421d64aec29b6bf44871cc6db77e695001dddf03 Section: libs Priority: optional Description: This plugin checks the status of a local Linux software RAID via the /proc/mdstat interface. Package: monitoring-plugins-mailq Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: perl, monitoring-plugins-common Filename: all/monitoring-plugins-mailq_0-0_all.deb Size: 7852 MD5sum: 3e2abdf65191631e3b8faa07d0ca81a0 SHA1: b2b5d00fec385d0c86dc236f0bdb8855d7b1fb51 SHA256: 176a31941bb206b58240a6942765d5f642fa8f33a07722463370b9daa6f1e8bb Section: libs Priority: optional Description: Checks the mail queue length via mailq/qmail-qstat, autodetecting or selecting sendmail, postfix, qmail, exim or nullmailer. Package: monitoring-plugins-mem Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: procps, gawk Filename: all/monitoring-plugins-mem_0-0_all.deb Size: 3250 MD5sum: cf7d081308b297f0b9fe9f3de63181d6 SHA1: cef727f963a92bf66b2e1f792c9a967c4a5cee7b SHA256: 4a6be9bd3b922db2744b77cc7f44ed47044591b6c45d7da2b398b9209d86e9d1 Section: libs Priority: optional Description: Uses command free to get free (buffered or unused) memory. Package: monitoring-plugins-mqtt Version: 5.1+git20260211.003f5cf-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 32 Depends: python3, python3-paho-mqtt (>= 2) Suggests: python3-jsonpath-rw Filename: all/monitoring-plugins-mqtt_5.1+git20260211.003f5cf-1_all.deb Size: 10532 MD5sum: 5504be2eab1156d1943bc34cba2bebc0 SHA1: faf274efd0341254c61d0af1c55186869e0408a6 SHA256: 04c06f0ae94dad4538725d753a21e42719a7d62f95b0509db54942862b2f6ff4 Section: net Priority: optional Homepage: https://github.com/jpmens/check-mqtt Description: Nagios/Icinga plugin to check a value published on a MQTT broker Subscribes to a topic on a MQTT broker, optionally after publishing to it, and checks that the payload arrives in time and matches given criteria: a value compared with an operator, or a Python expression for warning and critical. The round trip time is reported as performance data. Supports TLS, authentication and MQTT 3.1, 3.1.1 and 5. JSON payloads can be queried with a JSONPath expression when jsonpath-rw is installed. Package: monitoring-plugins-mqtt-topic-age Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 89 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, python3-paho-mqtt, python3:any Suggests: bash-completion Filename: all/monitoring-plugins-mqtt-topic-age_0.2.1-1_all.deb Size: 20488 MD5sum: 4a709e63ee05626d032a85c4b05b589b SHA1: 4c3d98dd765ed521789cc125edc7e697da0589c0 SHA256: 583e12b8ea1d578fb17ad4433aaadca79d0ece9046b3686ad99df20e9d68ce57 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_mqtt_topic_age Description: Nagios/Icinga plugin to check when messages last arrived on MQTT topics Checks when messages last arrived on MQTT topics, or how many arrived recently. mqtt_message_timestamp_logger, a daemon that runs as a systemd service, subscribes to the topics and records the arrival times in an SQLite database, which check_mqtt_topic_age reads; so the check needs no connection to the broker and cannot miss a message published between two checks. . Topic filters may use the MQTT wildcards, and every topic is checked on its own, so one live sensor cannot hide a dead one. Package: monitoring-plugins-nextcloud Version: 0.4.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-nextcloud_0.4.1-1_all.deb Size: 12192 MD5sum: 8e7fc2fd925abcc6ab5c61ee2b89e8f1 SHA1: e47a8dcc50d60003336327df6d5f7bfbace72703 SHA256: 7253e2cee01a820742f1f87d991ea4714f4ec11d3e0b365afb685781b729b78a Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_nextcloud Description: Nagios/Icinga plugin to check a Nextcloud instance Nagios/Icinga plugin for Nextcloud, written in Python 3 with the standard library only. The health mode reads the unauthenticated status.php, every other mode reads the REST API of the serverinfo app. . Modes: * health: is the instance installed, out of maintenance mode and answering * cpu: the load average of the server * memory: the RAM and swap usage of the server * freespace: the free space of the data directory * storage: files, users, storages and database size * users: the number of recently active users * apps: the number of apps with an available update * rotate: replaces the app password, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-nfs-health Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: gawk, bc Filename: all/monitoring-plugins-nfs-health_0-0_all.deb Size: 5710 MD5sum: 0351b85df5e327beacebe611de948029 SHA1: ee2b580a5d3170be49256314a1eb9389a47d0e7e SHA256: 265bbedadfcfcc6af921920746c1791ad8f9149369ceee38c7aa793f952128b5 Section: libs Priority: optional Description: Checks status and health of a nfs server. Package: monitoring-plugins-ntrip-caster Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 50 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-ntrip-caster_0.3.1-1_all.deb Size: 15278 MD5sum: 3b031115d648f4e8d0f1cee36caa7377 SHA1: eb573ea729b9b6afce9e4db1ab2f6d2047d14841 SHA256: 887c7217114c6bc4f6c4a88bd68107817c29a4f083fd53247dc1f33502e09ddb Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_ntrip_caster Description: Nagios/Icinga plugin to check NTRIP casters Nagios/Icinga plugin that checks whether an NTRIP caster serves current GNSS correction data, written in Python 3 with the standard library only. . Modes: * sourcetable: complete sourcetable, caster clock and a listed mountpoint * stream: valid RTCM3 data and the age of the newest observation epoch . The stream mode decodes the observation epochs of GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS and NavIC messages and compares them with the local clock. It also reports the satellites per constellation and the mean C/N0, and can alert on them, on the station position from 1005/1006 and on message types that must arrive. Package: monitoring-plugins-ntrip-clients Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: bash, gawk | mawk, iproute2, sudo Filename: all/monitoring-plugins-ntrip-clients_0.1-1_all.deb Size: 6808 MD5sum: dcd3b3e2e42674a7b982819adee85533 SHA1: d394f0326086820e6ada0ccb435324565c6a7c65 SHA256: 78747c9ed20828322e7a6480d41b619732dd29e9ad3556e48ba7edce88b80258 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_ntrip_clients Description: Nagios/Icinga plugin to check the clients of a local NTRIP caster Checks how many clients are connected to a local NTRIP caster, e.g. RTKLIB str2str with an ntripc:// output as used by RTKBase. str2str accepts at most 32 clients and never times out clients that send no valid request, so scanners can take all slots while the service keeps running. . It reports the accepted clients, the stale clients and the connections waiting in the listen queue. The plugin needs root or the caster's user; a sudoers snippet for the user nagios is included. Package: monitoring-plugins-nvidia-smi Version: 0.1.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 47 Depends: python3 Suggests: bash-completion Filename: all/monitoring-plugins-nvidia-smi_0.1.1-1_all.deb Size: 12888 MD5sum: 3e70a41113f723fa9d8af69d62c6bd2d SHA1: e6f758989d97da0ec0197cabfbeed2e87e592647 SHA256: 32ea468b889da20a0677e0923c27d297fc31cc2370a6dbb4c7cd4b1505ba5202 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_nvidia_smi Description: Nagios/Icinga plugin to check NVIDIA GPUs via nvidia-smi Nagios/Icinga plugin that checks NVIDIA GPUs with nvidia-smi: temperature, power, clocks and the reasons they are lowered, memory, load, fan, PCIe link and ECC, with all values in the performance data. Python 3 with the standard library only. . It supersedes check_nvidia_smi_temperature (monitoring-plugins-nvidia-smi-temperature); both can be installed. . Requires the proprietary NVIDIA driver (providing nvidia-smi) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-nvidia-smi-temperature Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 20 Suggests: bash-completion Filename: all/monitoring-plugins-nvidia-smi-temperature_0.2-1_all.deb Size: 4112 MD5sum: 8c94bb762af49ccd8c0afdfe87223015 SHA1: 0a9170dd64b600764b31dc87cbbb45fef3651b9a SHA256: 0ee5b0580a03d31f6755dae9f02359d5310d04d0a6f432c7c6a4283e86bacba0 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_nvidia_smi_temperature Description: Checks NVIDIA GPU temperatures via nvidia-smi Uses nvidia-smi to check the temperature of one or more NVIDIA GPUs. Requires the proprietary NVIDIA driver (providing nvidia-smi) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-openvpn Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: python3 Filename: all/monitoring-plugins-openvpn_0-0_all.deb Size: 5256 MD5sum: 62c9d4bb650c05f0599ca2832c6674ed SHA1: 5d91938140f8e17e4af6339fa8952a5660ade218 SHA256: bbfa4ee73d5c7909a28d71e6eb5f36335a0b04faf03878dd2841551dadb5a165 Section: libs Priority: optional Description: Check if an OpenVPN server runs on a given UDP or TCP port. Package: monitoring-plugins-openwrt Version: 0.5.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 66 Depends: python3 (>= 3.7), openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-openwrt_0.5.2-1_all.deb Size: 19752 MD5sum: e57a6edcb36ba0018fd2900635af728c SHA1: 3bed6961ed4c4df9dbdc8278369e4a859faff082 SHA256: 5964d155bf6c13838ca3e9d7202eebb2c5f0d3b77a7c49d7ca90a2b7fae4baea Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_openwrt Description: Agentless Nagios/Icinga plugin for OpenWrt devices via SSH Agentless Nagios/Icinga plugin for OpenWrt devices. All checks run over SSH with tools of a default OpenWrt image (BusyBox, ubus, uci, opkg/apk, and wg for WireGuard), so nothing has to be installed on the device. . Checks: memory, disk, load, uptime, conntrack table, netifd interfaces, wifi radios and clients, WireGuard handshake age, procd services, upgradable packages, banIP block lists, temperatures, and the internet access of the device (DNS, ping, HTTP(S)). Thresholds use the standard range format, and all checks print performance data. Package: monitoring-plugins-part-db Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 63 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-part-db_0.3-1_all.deb Size: 19624 MD5sum: e82c0f8aa7227ab13c69d42daf593bc3 SHA1: 804b2cfbbbd13775c1634cdb17e05519cf5157bc SHA256: f0183b85889a6e6375bbd6b17ec0072cedb2176f627a15013450898edeb56591 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_part-db Description: Nagios/Icinga plugin to check a Part-DB instance Nagios/Icinga plugin for Part-DB (https://github.com/Part-DB/Part-DB-server), usable with Nagios, Naemon, Icinga and anything else speaking the monitoring plugins API. It queries the Part-DB REST API and, for the frontend check, its web UI, so the monitoring host needs only network access and an API token. . Modes of check_part-db: * health: API reachability, token validity, database answer * web: web frontend response and TLS certificate expiry * stats: counts of parts, categories, footprints, suppliers * stock: parts below their configured minimum amount * token: days until the API token expires, CRITICAL below 30 . Only the Python 3 standard library is used. Package: monitoring-plugins-podman Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 31 Depends: python3 (>= 3.7), sudo Recommends: podman Suggests: bash-completion Filename: all/monitoring-plugins-podman_0.2-1_all.deb Size: 9244 MD5sum: 4b8d639064712e90d57164a658219e6c SHA1: 6c263d3c88b19b9d70812a2d227b34109a67efcc SHA256: 7fb10fd034c5e80aeb663e695492149bc4381cacada83f765b4f30fc63852177 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_podman Description: Nagios/Icinga plugin to check the containers of a rootless podman user Nagios/Icinga plugin that checks the containers of a rootless podman user via sudo, written in Python 3 with the standard library only. . It checks that every container is running, reports CPU, memory, network and block I/O usage of each as performance data, and alerts when a container gets close to its memory limit. It needs a NOPASSWD sudoers rule for "podman ps" and "podman stats" as the rootless user, and lingering for that user; see the README. Package: monitoring-plugins-postfix-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: postfix Filename: all/monitoring-plugins-postfix-queue_0-0_all.deb Size: 3330 MD5sum: 2ed138a274b73f3e2e3a38d3c39d6572 SHA1: 121e37665db289ee6cc4c4c6a10df217e16abed9 SHA256: 6539a6b9cb4e4e4dae9f940a4fea72232df62d009eadb60b28127baa7121e506 Section: libs Priority: optional Description: Uses mailq to check the length of the queue of postfix. Package: monitoring-plugins-postfix-relay Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 29 Depends: postfix, python3 (>= 3.7) Recommends: sudo Suggests: bash-completion Filename: all/monitoring-plugins-postfix-relay_0.2-1_all.deb Size: 8860 MD5sum: 80cf64d11cb9cf71d7f97917ee7ef25f SHA1: ff9c61efa336a2ebcad80a0e2544fff1f86b8181 SHA256: 9ed06e68545ef2ea2f86e9a365e2dbdc8fa95bdbb18dc26b0b3e78bb1dcdd871 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_postfix_relay Description: Nagios/Icinga plugin to check that Postfix can log in to its relays Nagios/Icinga plugin that checks that Postfix can log in to the relays it sends through, written in Python 3 with the standard library only. . It tests the relayhost and every relay in sender_dependent_relayhost_maps: connection, STARTTLS and SASL login with the credentials Postfix itself would use (also by sender, smtp_sender_dependent_authentication), and optionally MAIL FROM/RCPT TO without sending. Relays and logins come from the Postfix configuration, so no password is needed in the monitoring configuration. It needs root for the SASL password map, e.g. through a NOPASSWD sudoers rule; see the README. Package: monitoring-plugins-printer-php Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 47 Depends: php-cli, php-snmp Suggests: bash-completion Filename: all/monitoring-plugins-printer-php_0.2-1_all.deb Size: 14290 MD5sum: 9b955def6aa5633a6e91bf814c5231ee SHA1: a5beed6f171ab590d5ecc4917a4ae42b2ed9a077 SHA256: 69958f5990e09b6a8418109984f5940184c7cf997d061b16e22d7c2c99272c05 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_printer Description: Nagios/Icinga plugin to check a printer via SNMP Checks a printer via SNMP: toner and ink levels, paper trays, covers, hardware, the alert table and page counters. It uses the standard Printer-MIB and Host Resources MIB, so it works with most network printers, plus private MIBs of Ricoh and Kyocera. . Named check_printer.php (not check_printer) since Debian's monitoring-plugins-contrib package already ships its own, different, check_printer. Package: monitoring-plugins-proxy Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: wget, bc, gawk Filename: all/monitoring-plugins-proxy_0-0_all.deb Size: 4294 MD5sum: 4a39ac8b94201382f9ef41b05c80f722 SHA1: 60b8ec290ad4f6ad4a8e2ee34d8dd1c70a18f9cc SHA256: a01d7b7204aa3bc77d8f87cd24fa30be8c096c0f221a2d0d769f0c5fd45828ed Section: libs Priority: optional Description: Uses wget to obtain a file directly and through a proxy. Then it compares if the files are identical. Caution: lot's of websites include the time in their source code. These will be always different. Package: monitoring-plugins-psu-power Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 26 Depends: bash, coreutils, gawk | mawk, grep, ipmitool, sudo Suggests: bash-completion Filename: all/monitoring-plugins-psu-power_0.2-1_all.deb Size: 8994 MD5sum: 3444ac80be6e874dfe39d61266d86ea0 SHA1: ce18b43d117e632a68d81147da23db4e699f872d SHA256: 6ae7605791c4564f9cacdd218ae2182331b4974a675e86fe17b74244d7078327 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_psu_power Description: Nagios/Icinga plugin to check power consumption and PSU health via PMBus Nagios/Icinga plugin that reads the power supplies of a server over the BMC with IPMI Master Write-Read (PMBus): input power of each PSU and their sum, input voltage, temperature and fan speed, with thresholds for the total power and performance data. . ipmitool needs root (/dev/ipmi0), so the plugin calls it through sudo; the README has a sudoers example that allows only the PMBus reads. The probe script in the documentation finds the PSU addresses on the I2C bus. Package: monitoring-plugins-raspberry-voltage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-raspberry-voltage_0-0_all.deb Size: 3630 MD5sum: d04983f81862fd2fe0900b10cd5a1a06 SHA1: 90890b7bc6c8beffce35b4b7615d3576adcbeba2 SHA256: 5e2ad47694f1f7c4caef9493e28b49596d4c0409a30a07c597ffe6f2df070d32 Section: libs Priority: optional Description: Uses vcgencmd to report the core, sdram_c, sdram_i and sdram_p voltage rails as performance data, and checks vcgencmd get_throttled for under-voltage of the power supply. Requires vcgencmd (provided by Raspberry Pi OS's userland tools) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-remote-load Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 20 Depends: bc, openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-remote-load_0.2-1_all.deb Size: 4010 MD5sum: 2211113c512a74faff3aebd416f67cc1 SHA1: 05ae86bf9647be5dbc6496c4c39aacf593f576dc SHA256: 0a05bef55c030712d1086994bb07049576c46fcffa3ee26aa27e9b761449882c Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_remote_load Description: Check /proc/loadavg via ssh Connects via ssh to a remote machine, reads /proc/loadavg, and checks the 1 m, 5 m and 15 m averages. Package: monitoring-plugins-reprise-server Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 33 Depends: python3 (>= 3.7) Recommends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-reprise-server_0.2-1_all.deb Size: 9626 MD5sum: fa4141f8908609bf63bc94f2966eddde SHA1: 7fefbd1dab1c4e18a150aa4dd46b1306bc1d08a8 SHA256: 8d47c6d60e7c925a6368be324e7f55e2b445ba5af0f0fd5094ae0ea584a8b2be Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_reprise_server Description: Nagios/Icinga plugin to check Reprise License Manager servers Nagios/Icinga plugin that checks a Reprise License Manager (RLM) server with rlmutil, written in Python 3 with the standard library only. . It checks that the rlm server and its ISV servers are up, reports the usage of every product as performance data, and alerts on the days until the earliest expiry of any product. rlmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-sensor Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 29 Depends: jq, lm-sensors Suggests: bash-completion Filename: all/monitoring-plugins-sensor_0.1-1_all.deb Size: 7286 MD5sum: 2b374bf5c075d38389f251fae8327269 SHA1: e29347dce0b8b3209eb0a41cdce881d00e19d008 SHA256: 46c4bb3921451295493678b522d2ba4d17d1773ef44365432e5d476ea9a0fb32 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_sensor Description: Nagios/Icinga plugin to check hardware sensors read by lm-sensors Checks a hardware sensor read by lm-sensors, such as a temperature, fan speed or voltage, against the limits and alarms of the chip or against given levels, with the value in the performance data. It reads the JSON of both newer (sensors -J) and older (sensors -j) lm-sensors, and lists the sensors with -l. Package: monitoring-plugins-smb Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: smbclient, monitoring-plugins-common Filename: all/monitoring-plugins-smb_0-0_all.deb Size: 3044 MD5sum: 0133a4dfe1efdd3bb729b92498dab164 SHA1: 55c4447c8224e03011fb9524e1ecb3edc8c3ff1b SHA256: fa957d66df03e4730805c93cefddf8c0a64f415ae4af8f7831d581ef3893102f Section: libs Priority: optional Description: Uses smbclient to connect anonymously to a samba server. Package: monitoring-plugins-snmp-printer-supply Source: monitoring-plugins-snmp-printer Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: snmp Suggests: bash-completion Filename: all/monitoring-plugins-snmp-printer-supply_0.3-1_all.deb Size: 5286 MD5sum: c47821dc9ee78362400378786e6e178d SHA1: a3004939cca7327f310f9c845217d08f80d23c82 SHA256: 3d06270511b7b5b8ff110309419dfb78219f5660e44f9c91c71cf24786af099a Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_snmp_printer Description: Checks the supplies and trays of a printer via SNMP Uses snmpwalk to connect to a printer and check its supplies and the paper level of its trays. Package: monitoring-plugins-ssh-date Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: python3, openssh-client Filename: all/monitoring-plugins-ssh-date_0-0_all.deb Size: 3274 MD5sum: fb623bce5f979117d7f9bcbcf9c32118 SHA1: 4b3d131960e826d940c3ba8d0b3c12fce6a795cc SHA256: 1cefa4a53a6444dcab8f9bfd3c3642946e8a2185738339c1b0d5228b10129649 Section: libs Priority: optional Description: Uses ssh to run "date -R" on a remote host and compares the result to the local date and time to detect clock drift. Package: monitoring-plugins-ssl-cert Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 292 Depends: openssl Filename: all/monitoring-plugins-ssl-cert_0-0_all.deb Size: 49514 MD5sum: 65814cf25c849f5e0a2405cc7ad82e13 SHA1: fe1ff7956dae1f94aa100a5ee4a73770db6ad887 SHA256: ce4b66121d8024bd372d9f62255ee0e969fff39111620553dca63dec36ab7e92 Section: libs Priority: optional Description: Uses openssl to check validity, expiration and other properties of X.509 certificates. See https://github.com/matteocorti/check_ssl_cert. Package: monitoring-plugins-storcli Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: bash, coreutils, grep, jq, sudo Suggests: bash-completion Filename: all/monitoring-plugins-storcli_0.2-1_all.deb Size: 9018 MD5sum: b31e4026a14270ea963e81af648176cf SHA1: 1512502777ddc62654bcf14c3f672dab5e8638b4 SHA256: 0163964a166b1cbfb121eb270e279daa5bec53afacf5b245a35b2de0d81a7f0d Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_storcli Description: Nagios/Icinga plugin to check MegaRAID controllers via storcli Nagios/Icinga plugin that checks Broadcom/LSI MegaRAID controllers with storcli64: controller, virtual drive and physical drive states, media and other errors, predictive failures, and the temperatures of the drives and the controller (ROC), with performance data. . storcli64 itself is not included; install it from Broadcom. storcli needs root, so the plugin calls it through sudo; the README has a sudoers example that allows only the two read-only calls. Package: monitoring-plugins-stun-turn Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-stun-turn_0.2.1-1_all.deb Size: 11414 MD5sum: 57245e3afe80797428797c716704c908 SHA1: 95116b20598678c9c4e395e86528568b35c2769c SHA256: aed80f4fe8876fedcbd4038760f97b64f8a640bfa8d9365e0a9a8eed1fa7b50b Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_stun_turn Description: Nagios/Icinga plugin to check STUN/TURN servers Nagios/Icinga plugin for STUN/TURN servers such as coturn, written in Python 3 with the standard library only. . Modes: * stun: binding request, mapped address and response time * turn: authentication challenge, or with credentials (long-term or the shared secret of the TURN REST API) a relay allocation that is released again . Both modes work over UDP, TCP and TLS and check the TLS certificate. Package: monitoring-plugins-systemd Version: 5.0.0-0 Architecture: all Maintainer: Debian Python Team Installed-Size: 83 Depends: python3 (>= 3.9), python3-nagiosplugin, systemd, default-dbus-system-bus | dbus-system-bus Suggests: python3-gi Filename: all/monitoring-plugins-systemd_5.0.0-0_all.deb Size: 18352 MD5sum: 1f0a0843e9f0f1d8e9a8ead2f41a2d46 SHA1: 35a44c2714b4be054d7148cd47c724e39029f625 SHA256: 28e2aa66ae0fc300262cd60569cc36b48e7c70c39e07cffc50960bb11c91006c Section: net Priority: optional Homepage: https://github.com/Josef-Friedrich/check_systemd Description: systemd plugin for nagios compatible monitoring systems This systemd check for nagios compatible monitoring systems will report a degraded systemd to your monitoring solution. It can also be used to monitor individual systemd services and timers units. Package: monitoring-plugins-systemd-service Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-systemd-service_0-0_all.deb Size: 3224 MD5sum: fff950d630ddd60ac52e257593572d96 SHA1: 7dcf1f5781c9ea97a6027b497d873ab5d2348af4 SHA256: 0a595a359aecaac7f0155d8271e5f3166208a335fe309e4a10fa66383ab85c83 Section: libs Priority: optional Description: For a *.service it checks if it is prestent, enabled and alive. Extension for openSUSE: also check is a mountpoint is active. Package: monitoring-plugins-systemd-sh Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: openssh-client, systemd Suggests: bash-completion Filename: all/monitoring-plugins-systemd-sh_0.3-1_all.deb Size: 5686 MD5sum: 4de075628f98a3db2c60c84ca4c43d71 SHA1: 682d2f7a8122f6ffada2173a3384e42f784f58ba SHA256: 71eac7676485dfcf0ae907ba6d62050d4c75beb4580bbe21cd3671cb3fa4ed03 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_systemd.sh Description: Nagios/Icinga plugin to check failed systemd units and the boot time Checks systemd on a local or remote machine via systemctl: the boot time, failed units, and services that have to be running. Package: monitoring-plugins-tasmota-sensor Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 42 Depends: python3 (>= 3.8), python3-requests Suggests: bash-completion Filename: all/monitoring-plugins-tasmota-sensor_0.3.1-1_all.deb Size: 12188 MD5sum: 27a569a5f4fe34f83acffdab4bae8ca4 SHA1: b0ec803bf582dd17e42102a6eb56bd067422a8f9 SHA256: 0d66cbb3b567fcc0aa71f66cb3cfae149ea79a6b253b607759b9824687457d64 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tasmota_sensor Description: Checks Tasmota devices via the HTTP command API Checks Tasmota devices via the HTTP command API (/cm?cmnd=...). Supports checking a numeric sensor value against thresholds (-c may be smaller than -w), the time offset of the device's own reported time against the local clock or an NTP server, a boolean expression over POWER-style relay states, and a regular expression match against a sensor field's value. Package: monitoring-plugins-tftp Version: 0.1.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: tftp-hpa Suggests: bash-completion Filename: all/monitoring-plugins-tftp_0.1.2-1_all.deb Size: 5244 MD5sum: 888ada32ed101818c569910f3be2396c SHA1: 2e6474adc7cfd95c1fcb027934eb2ce2d0b30ceb SHA256: 900f3969f72cbc2aef4ef8e8722030c2453aa71614cae7d93c47f1a2b08b1fdd Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tftp Description: Nagios/Icinga plugin to check that a TFTP server serves a file Checks a TFTP server, e.g. for PXE boot, by downloading a file with the tftp-hpa client. A file that is served is OK, a TFTP error such as "file not found" is a WARNING, and no answer is CRITICAL. The download time and the file size go into the performance data, with thresholds for both. Package: monitoring-plugins-thermal-zone0 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-thermal-zone0_0-0_all.deb Size: 3266 MD5sum: cf262c31eede6126a3396f7bf47a285e SHA1: 29c503a0c69452d14ab2272abd16a0c2c4b32355 SHA256: 38b23edb39d8cbaa3aa07ff0fb420227be46ab303ed8ddb0d358ae5578953834 Section: libs Priority: optional Description: Reads /sys/class/thermal/thermal_zone0/temp to check the SoC/board temperature, as found on Raspberry Pi and many other ARM boards. Package: monitoring-plugins-tor-proxy Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: curl | wget Suggests: bash-completion Filename: all/monitoring-plugins-tor-proxy_0.3-1_all.deb Size: 6294 MD5sum: 5de0ad6543646467218ca5cbe21c043d SHA1: ed57b6d2c808400b749b1880644c30cc3bd40a92 SHA256: fb20dafaed6a4250308041156f083c70b87572ce934020d2c9f16f17b0ee2fc5 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tor_proxy Description: Nagios/Icinga plugin to check that a proxy exits to the Tor network Nagios/Icinga plugin that checks whether a proxy exits to the Tor network, by asking the check service of the Tor Project through it. Works with SOCKS proxies such as Tor itself and HTTP proxies such as Privoxy in front of Tor, using curl or wget; SOCKS proxies need curl. Package: monitoring-plugins-ts3 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: expect Filename: all/monitoring-plugins-ts3_0-0_all.deb Size: 3264 MD5sum: f7b84536cd75ba39afc31fb8fb2b27f0 SHA1: df7239d0922522f1d6347387c536496b2659c144 SHA256: 14f82b847ea8f35ee7e867f47a4512b8f9b963dc1d5660bda7803952caae1e9b Section: libs Priority: optional Description: Connects to the dataport of a teamspeak server and checks for its characterstic respone. Package: monitoring-plugins-vdr-diskusage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, gawk Filename: all/monitoring-plugins-vdr-diskusage_0-0_all.deb Size: 3648 MD5sum: d715fdcea448ae9059efb76fe160a47e SHA1: 4238d0c5668744ffb99a3920c14c920826a88ca9 SHA256: 38bf024c5fa0694381ad3ccfdf69f1caa5140741e59ae71873ef795b9af1fe1c Section: libs Priority: optional Description: Uses svdrpsend to check disk utilization of VDR. Package: monitoring-plugins-vdr-signalstrength Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, vdr-plugin-femon Filename: all/monitoring-plugins-vdr-signalstrength_0-0_all.deb Size: 3874 MD5sum: e0fe6d1af20141c003d4b202c10069f7 SHA1: f3c7c946087247ae4fd3f6c209603b9198005e76 SHA256: 99b25257286f042edb21a0f933bf8ef2003ff45572a794f3c100f410ac5de728 Section: libs Priority: optional Description: Uses svdrpsend to connect to a VDR using the femon plugin. Package: monitoring-plugins-zyxel-hw-monitor Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 68 Depends: snmp, gawk | mawk Recommends: python3 Suggests: bash-completion Filename: all/monitoring-plugins-zyxel-hw-monitor_0.2-1_all.deb Size: 9170 MD5sum: 0e9412336f0b167cb0e43734516cc1fd SHA1: 432de0b47b9c76d5dc655b8c758dc52a27f1e8b2 SHA256: a5693e2dcafb1fb9545a8ec5ad14e7026f25ad3be8fc2f150bc932d6dda8f28a Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_zyxel_hw_monitor Description: Nagios/Icinga plugins to check Zyxel devices via SNMP Plugins for monitoring Zyxel devices via SNMP, based on the ZYXEL-HW-MONITOR-MIB and ZYXEL-ES-COMMON MIBs. They are compatible with Nagios, Icinga and other monitoring systems supporting Nagios plugins. . Included checks: * check_zyxel-cpu: CPU usage (%) * check_zyxel-mem: memory usage (%) * check_zyxel-flash: flash usage (%) * check_zyxel-fan: fan RPM (indexed sensor) * check_zyxel-temperature: temperature (indexed sensor) * check_zyxel-voltage: voltage (indexed sensor) * check_zyxel-power: power source status (indexed source) * check_zyxel-time: switch time skew against an NTP server or local time . All plugins use numeric OIDs, so no MIB files are needed on the monitoring host. SNMPv2c and SNMPv3 are supported. Package: mqtt2logger Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 65 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, python3 (>= 3.7), python3-paho-mqtt, python3-yaml Suggests: bash-completion Filename: all/mqtt2logger_0.2.1-1_all.deb Size: 15836 MD5sum: d673765c71a5aac20d74582f27921a0e SHA1: efbc2aa2b6eb3c885452cb45df96d94f627452e2 SHA256: 075a9c8679966b53863b4403a847021139c4d2a396e92a571a364bcc151009d0 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/mqtt2logger Description: Forward the MQTT logs of ESPHome and Tasmota devices to rsyslog and journald Subscribes to the log topics of ESPHome and Tasmota devices on an MQTT broker and forwards each log line to rsyslog (RFC 5424, with the device as host name) and to systemd-journald, each configurable. Severity and time stamp are taken from the messages where they contain them. A persistent MQTT session lets the broker keep QoS 1 messages while the daemon is down, and queues keep messages while rsyslog or journald are unavailable. The systemd service runs as the user mqtt2logger and is not enabled by default. Package: purge-postfix-mails Version: 0.4-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 24 Depends: jq (>= 1.6), postfix (>= 3.1) Suggests: bash-completion Filename: all/purge-postfix-mails_0.4-1_all.deb Size: 4934 MD5sum: 55cdfd54f1d8f7b6f0d2ac5bf456408d SHA1: 23de33c5ade0eabc00aae8efae7dd09461808e40 SHA256: 96137eefe1edd1a7f106944f90b209dfbcc972f8fba8c9108fbb6096fa7b6f2d Section: mail Priority: optional Homepage: https://github.com/Aikhjarto/purge_postfix_mails Description: Scripts to break a mail loop by purging undeliverable mails from Postfix Scripts that break a mail loop in Postfix, as caused by a machine mailing its admin about every logged error while the relayhost is unreachable, by deleting the queued mails that cannot be delivered: * purge_postfix_mailer_daemon.sh deletes bounces, mails to postmaster@myorigin and queued mails that mention postmaster or MAILER-DAEMON of myorigin * purge_postfix_mails.sh additionally deletes deferred mails the relayhost refused * purge_postfix_per_recipient.sh deletes the mails to given recipients * purge_postfix_per_sender.sh deletes the mails from given senders Package: rapl-mqtt Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 26 Depends: python3 (>= 3.9), mosquitto-clients Filename: all/rapl-mqtt_0.1-1_all.deb Size: 5746 MD5sum: f67680fa28c7916aac880a2744aed276 SHA1: e9d2cb83697e062f6f44e019f822ed9e0d03bc1f SHA256: bb60c7231c7bbeafc1f651b400fbcb0a461a3ac40fe5fde481da9ae64a6ba6a7 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/rapl-mqtt Description: Publish the CPU's RAPL power to MQTT Reads the energy counters of the CPU's RAPL (Intel since Sandy Bridge, AMD since Zen) and publishes the average power of each zone (package, cores, DRAM) in watts to an MQTT broker, once a minute. Home Assistant MQTT discovery configs are published too, so the zones show up as power sensors. . Options for the service go into RAPL_MQTT_OPTS in /etc/default/rapl-mqtt, e.g. RAPL_MQTT_OPTS="--broker mqtt.example.lan"; the default broker is localhost. The service is not enabled on installation. Package: rsyslog-maillog Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 33 Depends: rsyslog Filename: all/rsyslog-maillog_0.1-1_all.deb Size: 7102 MD5sum: 7c897880fa623a6316d2c1b307ee557e SHA1: cc8954c026670ef51bfd940c6db5d9bdffee2107 SHA256: a5bc5e1054d31b0f3ddbba5c1d97cf7168741ab1fc66117e09f2576c7d48d6cd Section: admin Priority: optional Homepage: https://github.com/Aihjarto/rsyslog-maillog Description: This project provides a config for forwarding important log lines in rsyslog via postfix. Package: vdradmin-am Version: 3.6.13-1.1 Architecture: all Maintainer: Debian VDR Team Installed-Size: 1360 Depends: perl:any, libio-compress-perl, libtemplate-perl, liburi-perl, libio-socket-inet6-perl, libsocket6-perl, liblocale-gettext-perl | libintl-perl, libwww-perl, adduser, libtemplate-plugin-javascript-perl, libcgi-pm-perl Suggests: vdr (>= 1.7.15), libauthen-sasl-perl, vdr-plugin-epgsearch (>= 0.9.23) Conflicts: vdradmin Replaces: vdradmin Provides: vdradmin Filename: all/vdradmin-am_3.6.13-1.1_all.deb Size: 285702 MD5sum: be5f46f30c3b3df50519f109e98f2d24 SHA1: 472856da0f65ed04e90c7ce676e23a13e3712faf SHA256: 0ff0f725db8f2762f5fc8078937c0ce0171dc978d740d87006c4efc0940371e4 Section: video Priority: optional Homepage: http://andreas.vdr-developer.org/vdradmin-am/index.html Description: Web-based administration tool for vdr vdradmin-am provides a webinterface for managing the Linux Video Disk Recorder (vdr) Package: vm-boot-order-2 Version: 0.3.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 43 Depends: python3 (>= 3.7), python3-libvirt Recommends: sysstat Suggests: bash-completion Filename: all/vm-boot-order-2_0.3.2-1_all.deb Size: 11858 MD5sum: ccc36aa68103a67dbadb978b9dd07e7a SHA1: 84f6dc8dc48d27518088652c0e1b7f05d63b38eb SHA256: 6c038491251b91612f8f3cc4cca7f67c8e05f3d8c6186cd603a8f2c436dcef10 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/vm-boot-order-2 Description: Start libvirt VMs in order at boot and shut them down in parallel Starts libvirt VMs one after another in a configured order at boot, and shuts them down in parallel at system shutdown. After starting a VM, it waits up to a configured time, or until the I/O load of a configured disk drops, before starting the next one. At shutdown, VMs that do not stop within a timeout are powered off. . The service is installed but not enabled. Configure the VMs in /etc/vm-boot-order-2.conf, check it with "vm-boot-order-2.py status", and disable libvirt autostart for those VMs.