Package: block-badips Version: 0.8.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 56 Depends: bash, ipset, iptables, curl | wget, util-linux, grep, coreutils, sed, gawk | mawk Suggests: bash-completion Filename: all/block-badips_0.8.0-1_all.deb Size: 17072 MD5sum: 8bf0017323df0ae0271796f2b9752d8d SHA1: 90422a894f1d02ee7bbbd5a55d55eb19646cfd73 SHA256: 0225e8fc88ce290d7c554d32690c8da36fdda8cf19a16ddbe500f7f5a5cb1d8b Section: net Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Block IPs of known brute-force attackers Downloads a list of IPv4 and IPv6 addresses and ranges, by default from blocklist.de, loads it into ipsets and drops their traffic with one iptables rule per address family in the PREROUTING chain of the raw table. Invalid, too broad or suddenly much shorter lists are refused. Package: blocklist-updater Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 56 Depends: python3 (>= 3.9) Suggests: bash-completion Filename: all/blocklist-updater_0.2-1_all.deb Size: 13446 MD5sum: 47830a5626c0635b58b3885fca1463d2 SHA1: 769a3a69242414db9a43438bc56dddc9d1605d83 SHA256: 73f476c12881f64e03fa4cca7ac34526d80a6ba7cdb3aacee0519efb1e4e73df Section: net Priority: optional Homepage: https://github.com/Aikhjarto/blocklist-updater Description: Download, validate and merge IP blocklists Downloads IP blocklists from several providers (Spamhaus DROP, AbuseIPDB, blocklist.de, CINS Army, Emerging Threats, GreenSnow, DShield and others), validates them and merges them into one list, e.g. for block-badips. Broken downloads keep the previous list, private, reserved and own networks are never published, and stale lists age out. . Each provider is a section in /etc/blocklists/blocklists.conf and is switched on by enabling its timer update-blocklist@
.timer. No unit is enabled on installation; the units run as www-data. Package: cron-check-nagios Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: monitoring-plugins-nagios, mailx, cron Filename: all/cron-check-nagios_0-0_all.deb Size: 2960 MD5sum: 27cc4a2382ea303463c533fd996b3b4c SHA1: 467f269b93554a735c33091cf26ceb7a5e5c1f14 SHA256: 463dfde4e45ae6c3efca9b86acc87b5adb60ef038ea54894104466bd4d38e1c8 Section: libs Priority: optional Description: Provides a script that can be executed via cron to see if nagios is still up and running. If nagios is down or last log entry longer than a minute ago, a mail is sent to root. Package: iipsrv Version: 1.3-1 Architecture: amd64 Maintainer: Thomas Wagner Installed-Size: 500 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, libavif16 (>= 1.2.1), libc6 (>= 2.38), libfcgi0t64 (>= 2.4.2), libgcc-s1 (>= 3.3.1), libgomp1 (>= 4.9), libjpeg8 (>= 8c), libmemcached11t64 (>= 1.1.4), libopenjp2-7 (>= 2.0.0), libpng16-16t64 (>= 1.6.46), libstdc++6 (>= 11), libtiff6 (>= 4.0.3), libwebp7 (>= 1.5.0), libwebpmux3 (>= 1.5.0) Filename: amd64/iipsrv_1.3-1_amd64.deb Size: 196390 MD5sum: eb1251e37601e385eb6aac3960c72b83 SHA1: a424f5f1b45c728b8b458f1a82051425789fca3a SHA256: 3b84886d3d625194db43374f2c6979769f1ee391b61709fd05ab55c5ae1caf17 Section: web Priority: optional Homepage: https://iipimage.sourceforge.io Description: IIPImage server for high resolution images iipsrv is a fast FastCGI image server for streaming and dynamically transforming high resolution and scientific images. It speaks the IIP, IIIF, Zoomify and DeepZoom protocols and reads tiled multi-resolution TIFF and JPEG2000 images; output can be JPEG, PNG, WebP, AVIF or TIFF. . It runs behind a web server such as Apache, nginx or lighttpd through FastCGI. The iipsrv.service unit starts it as a standalone FastCGI daemon listening on port 9000; settings go to /etc/default/iipsrv. . This is a newer upstream release than the iipimage-server package of the distribution, installed as /usr/sbin/iipsrv. Package: journald-remote-follower-rsyslog Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 39 Depends: python3 (>= 3.7), python3-systemd, systemd-journal-remote Recommends: rsyslog-relp Filename: all/journald-remote-follower-rsyslog_0.1-1_all.deb Size: 9622 MD5sum: 7392bb64944be8f258230e529daa74eb SHA1: 5556c96aa8d75652674090a95752c5387d9faeb0 SHA256: 5b8234d8ab6bfa3b4cd097a8a4c8ebcf364f66a8266132f7fd68a831447413a8 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/journald-remote-follower-rsyslog Description: Forward systemd-journal-remote journals to rsyslog in arrival order rsyslog's imjournal with Remote="on" merges the local and the remote journals by time and skips entries that are uploaded late. This program reads only the journals that systemd-journal-remote receives, follows them in the order the entries were written and sends every entry to rsyslog's imrelp input. The journal cursor is saved only after rsyslog acknowledged the entries, so delivery is at least once. A backfill mode sends the entries of a time range that are missing from rsyslog's per-host files. . The service is installed but not enabled; rsyslog has to be configured first, see the example in the documentation. Package: kvm-guest-update Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: bash (>= 4), coreutils, jq, libvirt-clients, bsdutils Suggests: bash-completion Filename: all/kvm-guest-update_0.3-1_all.deb Size: 14842 MD5sum: c76b706e35086cfe3436966a33c45279 SHA1: 73ce8ffd0619ac3f85292ed2f56c3ff56309a16c SHA256: 737d5a9109a41c35a3a2678ffd4298bb157580eb66985302b95899720485a379 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/kvm-guest-update Description: Update Debian and openSUSE Leap VMs through the QEMU guest agent Updates the running Debian and openSUSE Leap VMs of a KVM host through the QEMU guest agent, so no SSH access or password is needed in the VMs. . Each VM is checked before its upgrade and skipped if the package manager would ask a question (changed conffiles, dependency problems, packages to be removed, licenses). Skipped VMs are logged with priority err for a log monitor. Afterwards every VM is checked for a needed reboot; VMs are never rebooted. The upgrade runs in each VM as a transient systemd unit, so it finishes even when the guest agent is upgraded or the script interrupted. Hooks in the VMs can run commands before and after the upgrade. Package: logherald Version: 0.3.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 117 Depends: python3 (>= 3.7), python3-yaml, systemd Recommends: go-sendxmpp Suggests: bash-completion, rsyslog Filename: all/logherald_0.3.2-1_all.deb Size: 32204 MD5sum: 5dfd5bf5d06c47d40b581b153344698d SHA1: 27326746650a13e824b438f3a9f92591a7ded536 SHA256: 4b738c7863ae926d40eb878c4406c7d67372d16bf7db4aa1d7409f58dc197d33 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/logherald Description: Filtered log messages by mail and XMPP, as digests and in batches Selects log messages by severity and by include and exclude rules on host, program, facility, message and systemd unit, and sends them by mail and XMPP (go-sendxmpp). "logherald digest" sends a digest of a time span from the systemd journal and the files rsyslog writes, with messages in both counted once; a systemd timer runs it every hour, not enabled by default. "logherald stream" reads the messages rsyslog's omprog writes to its stdin and sends them in batches, after a number of messages or seconds; an example rsyslog configuration is included but not activated. Package: monitoring-plugins-apcaccess Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: apcupsd, python3 Filename: all/monitoring-plugins-apcaccess_0-0_all.deb Size: 3422 MD5sum: f7b033a43d3fa857831044cf0d8b6e85 SHA1: a31efdc0e59c7dc0462168fa11048d72cd0f4d16 SHA256: 1cc31548a3cfcc0642807b273464707a176d004d6b631b444f590c2390379eac Section: libs Priority: optional Description: Uses apcaccess to retrieve data from a running apcupsd. Package: monitoring-plugins-bareos-job Version: 1.2-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 271 Depends: python3 (>= 3.7), python3-psycopg2 Filename: all/monitoring-plugins-bareos-job_1.2-2_all.deb Size: 231240 MD5sum: 69473e4ade4c8df7449a004dfc5486c0 SHA1: fee48c7965d56fed53b23272824b59f6b5030493 SHA256: 52a2c90e3a982654d54f4e6342298780dc79aed27b22306213da0247dcf2e41e Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-job Description: Nagios/Icinga plugin to check a Bareos backup job Checks a specific Bareos backup job via the Bareos PostgreSQL catalog, optionally only its most recent run, and reports files, size, duration and age as performance data. Package: monitoring-plugins-bareos-pool Version: 1.0-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 43 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-pool_1.0-2_all.deb Size: 14650 MD5sum: b7f46a5bb13c2dc3857859e59bbe3157 SHA1: fa8cbda82b32cbe5faadc65d3c98bcf7c13ebc17 SHA256: 60ceb1db92cfbb7368663918f54c5fdc902c2162404c562a57f8827916735b58 Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-pool Description: Nagios/Icinga plugin to check the tapes in Bareos pools Checks the number of tapes in a Bareos pool via the Bareos PostgreSQL catalog, and the number of volumes overdue for recycling back to the scratch pool. check_bareos_pool_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-bareos-tape Version: 1.1-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-tape_1.1-2_all.deb Size: 14972 MD5sum: 99e3f9e0afae1f634bed9d9c3e2d7828 SHA1: 1a81bd1d4822a3d6a096ded16f371df110cc98f9 SHA256: 42a4ef06a2816cf4feb6a5430e54b4777ea1b370afd67aedb5dfbdf0418b6ded Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-tape Description: Nagios/Icinga plugin to check the lifecycle of Bareos tapes Checks the lifecycle state of Bareos tape volumes via the Bareos PostgreSQL catalog: recycle count, mount count, write errors, tape age and volume status. check_bareos_tape_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-block-badips Source: block-badips Version: 0.8.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 24 Depends: sudo, bash, grep, ipset, iptables Suggests: bash-completion Filename: all/monitoring-plugins-block-badips_0.8.0-1_all.deb Size: 5372 MD5sum: 1d7e716c38c2dc5e9236bb469677195e SHA1: bb82994bb23d6138a3b57d2a93449883b92f3dd1 SHA256: 82a77490b47d2e09b5e386c77775a22fee14a895e6e9fa023f4a10da584cf7d1 Section: libs Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Nagios/Icinga plugin to check the blocklists of block-badips Checks the number of blocked entries, the age of the last update, ipsets that no rule uses and nearly full ipsets. A sudoers snippet for the user nagios is included. Package: monitoring-plugins-btrfs-sysfs Version: 0.4-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 45 Depends: python3 (>= 3.7), util-linux Recommends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-btrfs-sysfs_0.4-1_all.deb Size: 13968 MD5sum: 3e254395b09c43d653b21cb35e28db18 SHA1: 4e69289c5e8155f279dcb52887f06d625a5631a1 SHA256: 152e65b6dc9777704f6cbef65abede42af6e05694485b1f76e6b0d50a8a3227a Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/check_btrfs_sysfs Description: Nagios/Icinga plugin to check btrfs space and device errors without root Monitoring plugin for btrfs file systems. It reads /sys/fs/btrfs, which every user can read, so it needs no root, no sudo and no btrfs ioctls. It checks the local machine, or a remote host over SSH, where nothing has to be installed. . It checks the unallocated space, the metadata usage including the global reserve, optionally the data usage, the error counters of each device and the quota (qgroup) limit of the mounted subvolume, and hints at a balance when allocated data chunks are mostly unused. Package: monitoring-plugins-cups-printer Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: cups-client Filename: all/monitoring-plugins-cups-printer_0-0_all.deb Size: 3094 MD5sum: 4901e2bcdbfbf50d1011e7a9940d007c SHA1: 0dd1b4598d181f5ab2553120f070afa7067913dc SHA256: dc0bae97371d56f7672bb7f43b3c791e821d5250939a8323bb181b0185e93d06 Section: libs Priority: optional Description: Checks if cups provides a certain printer. Package: monitoring-plugins-cups-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: cups-client Filename: all/monitoring-plugins-cups-queue_0-0_all.deb Size: 4304 MD5sum: 01b1f5bac23a4b88dfa0b2543a99dace SHA1: 1617669d8fdbe641781243f11ee1fa0ec990dbf8 SHA256: b33a9e7cab83c92adb02a06f79fcfcd3a7c4511d1ce9462cbacbb9651615c1e3 Section: libs Priority: optional Description: Checks the length of a printer queue in cupsd. Package: monitoring-plugins-dd-wrt-inet-access Source: monitoring-plugins-dd-wrt Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-dd-wrt-inet-access_0.2-1_all.deb Size: 3304 MD5sum: 30bfac9924a7b6af7ed20728bcb293ca SHA1: 1ece37d936541c38dbb2b6235f12486071830136 SHA256: f50b86b3bf6f239b57540a33153927c3ad5ec7c083db7c9523a191ca7b7a473f Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check if a router running dd-wrt has internet connection Logs in via ssh on a router running dd-wrt and tries to access a certain website with w3m to check if internet access is given. Package: monitoring-plugins-dd-wrt-ps Source: monitoring-plugins-dd-wrt Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-dd-wrt-ps_0.2-1_all.deb Size: 3430 MD5sum: ce9ab4b0188adede1f9e7b46b78304d3 SHA1: 85afc9bf6c577bbaa37e1df5d491888687a65526 SHA256: a3d107defeb840e1b10caea39366948439d85527ba7dadbe453936301b1068b0 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check running processes on a dd-wrt router Logs in via ssh on a router running dd-wrt and checks with a list of given processes if all of them are running. Package: monitoring-plugins-dns-pl Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Filename: all/monitoring-plugins-dns-pl_0-0_all.deb Size: 9400 MD5sum: 64fd64d12eb2fcef1d288ac1993881ff SHA1: c089215a7432580ad38f6004c454af6f51da5638 SHA256: 08d09bf6ac053680294472a5a5359ce442e492bf0e884a7036f0866c92fc4ebf Section: libs Priority: optional Description: Uses perl to query a DNS server and checks the response. See https://github.com/thorfi/nagios-bind9-plugin. Package: monitoring-plugins-esphome-sensor Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 55 Depends: python3 (>= 3.8), python3-requests Recommends: python3-aioesphomeapi Suggests: bash-completion Filename: all/monitoring-plugins-esphome-sensor_0.3.1-1_all.deb Size: 15554 MD5sum: 32e9f3af881fa72e12dea487f5c53884 SHA1: f2c3a8ff46b4b576c73ee886d789a7e937eb99a3 SHA256: c9941924ef95091f4296bc0c66dc9ff1eea8ab8acbad52bc6f3c3ae0e806fff6 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_esphome_sensor Description: Checks ESPHome devices via the native API or web_server v3 Checks ESPHome devices via either the web_server (version 3) HTTP JSON API (with optional HTTP basic auth) or the native API component (with optional plaintext password or Noise PSK encryption key). Supports checking a numeric sensor/text_sensor value against thresholds (-c may be smaller than -w), the time offset of a sensor against the local clock or an NTP server, and a boolean expression over multiple binary_sensor entities. --mode api additionally requires the python3 module aioesphomeapi to be installed separately. Package: monitoring-plugins-exim-queue Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: exim4-daemon-light | exim4-daemon-heavy Recommends: sudo Suggests: bash-completion Filename: all/monitoring-plugins-exim-queue_0.1-1_all.deb Size: 5512 MD5sum: 08c2f0087e7cae5e1ae91732ff9e1d53 SHA1: ff1765a73aab11c9ccb3b032fee85dfcfa13be68 SHA256: ba6e7506cdd0399704fc33755635e09aeebbb6e42aab87d797dd790a57ed59f9 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_exim_queue Description: Nagios/Icinga plugin to check the exim mail queue Checks the exim mail queue: the number of messages, and optionally frozen messages and the age of the oldest message, with thresholds for each and all values in the performance data. As only exim admin users may list the queue, it can run exim with sudo. Package: monitoring-plugins-file-age2 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Filename: all/monitoring-plugins-file-age2_0-0_all.deb Size: 3730 MD5sum: 468d96361a399db20dc8b6168a46be03 SHA1: c91371f4eccd43249b2cf249d470ed196796eee8 SHA256: a931add0a56146b4a22ef353c28f9d4ea6f940a021929ae2894080d05dbcd831 Section: libs Priority: optional Description: Check file age and size but has a mode to not report error on missing files. Thus file-age2 is suitable for lock files. Package: monitoring-plugins-file-exists Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Filename: all/monitoring-plugins-file-exists_0-0_all.deb Size: 2796 MD5sum: cd8927c6586c6043afb8c7440e001a12 SHA1: 751483a41293d0dee44dd6c712abf5a6383cbe87 SHA256: 12a8effdb3b5ecbc536c5a6b6c0be3e653dee1c5b6deda06bc7e427abdfc8f3b Section: libs Priority: optional Description: Uses test command to check if a file exists. Can also be used for device files /dev/*. Package: monitoring-plugins-fileage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3 Filename: all/monitoring-plugins-fileage_0-0_all.deb Size: 3878 MD5sum: b93dd3532447c1b35d5cc0be8d1908d3 SHA1: 1c7e1e13057282e04cd9f8cebb3d8f0bfba07528 SHA256: 656057f2609c6c9c52f21d8cf4061c2c60befbdad927e2273eb4649d32d24e59 Section: libs Priority: optional Description: Checks if a file is younger than a certain age. Useful for checking arbitrary daemons that write to files periodically. Package: monitoring-plugins-flexlm-server Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 35 Depends: python3 (>= 3.7) Recommends: openssh-client Suggests: bash-completion Breaks: monitoring-plugins-flexlm (<< 1) Replaces: monitoring-plugins-flexlm (<< 1) Filename: all/monitoring-plugins-flexlm-server_0.3-1_all.deb Size: 10280 MD5sum: 1eae1fce1594d1378d5bcbff2b812dd2 SHA1: b7b48f1aa32a44bdb93df1d45ec65e06885c4312 SHA256: 1fc6f03a144f24d07f4c39f421f17c45acf3e206ff3bd744a49a3b18c4ae91c2 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_flexlm_server Description: Nagios/Icinga plugin to check FlexLM license servers Nagios/Icinga plugin that checks a FlexLM (FlexNet Publisher) license server with lmutil, written in Python 3 with the standard library only. . It checks that the license server and all vendor daemons are up, reports the usage of every feature as performance data, and alerts on the days until the earliest expiry of any feature. lmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-folder Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: libmonitoring-plugin-perl Filename: all/monitoring-plugins-folder_0-0_all.deb Size: 4734 MD5sum: ea66864e4088ab82a6bf00e70423b8b1 SHA1: 8dbf969c95601b9f3cad043ca9668321f50e86a6 SHA256: a3e57a934e220e03e14f308cf87812c2e460514d9d614e5a3463f082789a5c43 Section: libs Priority: optional Description: Checks files in a given folder for count, total size and age, using thresholds in monitoring-plugins format. Package: monitoring-plugins-ftp Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-ftp_0-0_all.deb Size: 3464 MD5sum: e3ab31718e4571b0e801bb33fc44c10d SHA1: ee6b4aa81ddc0b1c9b41e0c6218cb621f57ec4cb SHA256: 17d0c2bdee2cddcaed10989bb3660e1209a3950eb90b79e91f2b6e09791e08ce Section: libs Priority: optional Description: Checks if an ftp server is up and running by logging in. Package: monitoring-plugins-gitlab Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 38 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-gitlab_0.3-1_all.deb Size: 11932 MD5sum: 4b157c609124d65697c7894927123dcd SHA1: f2d5e83bd9b997e87fd8c34aaf8521eb5d4f144b SHA256: cfb737682211186ceb3aa0b6b7a89bcc3852ec7f5e4c925fbe042769fb19c1ec Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_gitlab Description: Nagios/Icinga plugin to check a GitLab instance Nagios/Icinga plugin for GitLab, written in Python 3 with the standard library only. It queries the GitLab REST API, so the monitoring host needs nothing but network access and an access token. . Modes: * health: does the API answer, which version runs, and how fast * token: how many days the monitoring token itself is still valid * stats: users, projects, groups, issues and merge requests * sidekiq: background job processing and backlog * migrations: failed or unfinished batched background migrations * rotate: renews the access token before it expires, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-hassio Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3, python3-requests Filename: all/monitoring-plugins-hassio_0-0_all.deb Size: 4118 MD5sum: 51089869bf0b8732f4932ada89593cb4 SHA1: 12c457a70a91471851456b959b3afd06aae8bd01 SHA256: a4b5f2747a463a7eed16f6b378af1f5bfa6001fc00331e110923b2c945082d09 Section: libs Priority: optional Description: Queries sensors of a Home Assistant instance via its REST API and compares their states against expected string, timestamp or numeric values. Package: monitoring-plugins-homeassistant-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 47 Depends: python3 (>= 3.8) Suggests: bash-completion Filename: all/monitoring-plugins-homeassistant-sensor_0.2.1-1_all.deb Size: 13436 MD5sum: 4920bbe32716c3a608c95487dae3d643 SHA1: d846e9928ccb59a9050f69545c5cf0ad001787ae SHA256: 90616878d00ee65ee4d6e210267332c7c1de53d5468a2022b8e0de7554e8f6a3 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_homeassistant_sensor Description: Checks Home Assistant entities via its REST API Checks Home Assistant entities via its REST API, with a long-lived access token. Supports checking a numeric state or attribute against thresholds (-c may be smaller than -w), that one entity stays above or below another by a margin (e.g. a wall temperature above the dew point), how long ago an entity last reported, the time offset of a timestamp entity, a boolean expression over on/off entities, and a regular expression against a state. Unavailable entities are CRITICAL by default. Package: monitoring-plugins-immich Version: 0.4.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 35 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-immich_0.4.1-1_all.deb Size: 10414 MD5sum: ac6c768e4e47cce25d526e3dadaea25b SHA1: 375c8d634ca47416208829bc99b9fc9a0f536491 SHA256: b3c688282e81fc7d58f569c4ef6515b4903170666d5c3fb8d10d698c1ab38f90 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_immich Description: Nagios/Icinga plugin to check an Immich instance Nagios/Icinga plugin for Immich, written in Python 3 with the standard library only. It queries the Immich REST API, so the monitoring host needs nothing but network access and an API token. . Modes: * health: does the server answer its ping endpoint, and how fast * storage: how much of the storage is used * stats: how many photos and videos are stored, and how much space they use * rotate: gives the API key a new secret, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-influxdb Version: 0.2.1-1 Architecture: amd64 Maintainer: Thomas Wagner Installed-Size: 7482 Depends: libc6 (>= 2.34) Filename: amd64/monitoring-plugins-influxdb_0.2.1-1_amd64.deb Size: 2543870 MD5sum: 5ca08893b70aed8c62cc5775eca60bc2 SHA1: 349c549d74f80e402a07a38049cf367cdfdba564 SHA256: 7286184bddb7cba893f6ed1b3d3832dcc24090bbcd3a1f90f4b00e7b15a33ec1 Section: net Priority: optional Homepage: https://github.com/NETWAYS/check_influxdb Description: Nagios/Icinga plugin to check InfluxDB Icinga/Nagios check plugin for InfluxDB written in Go. It can check the health endpoint of an InfluxDB instance and evaluate the result of a Flux query against thresholds. . Both InfluxDB 1.8 (with the /health endpoint) and 2.x are supported. Package: monitoring-plugins-influxdb-data-age Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 36 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-influxdb-data-age_0.2.1-1_all.deb Size: 10328 MD5sum: d6b20e019b9daa4c6ed31b86b11514a7 SHA1: bd9356b2f14fcf909a57ff62cd381816707940c7 SHA256: 2044a6b828845516a8b4b9db863bb90b21984a6d0673666aa477ff6aa46116f8 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_influxdb_data_age Description: Nagios/Icinga plugin to check the age of the newest data in InfluxDB Nagios/Icinga plugin that checks how old the newest data is that an InfluxDB 2 Flux query returns, to catch measurements that stopped arriving. Written in Python 3 with the standard library only. The plugin was check_influxdb_data_age.py in the monitoring-plugins collection; that name is kept as a link. Package: monitoring-plugins-ipmi-power Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: freeipmi, ipmitool Filename: all/monitoring-plugins-ipmi-power_0-0_all.deb Size: 3346 MD5sum: d936fd640c3e91850ed24304624e4d97 SHA1: a8264554854bbd07c7b6d2f2984ed969e99798d0 SHA256: 20d1cf2bf0711ec00a096907eb8fe298cde3ad4c3832a21dbaa8e1b2577f2685 Section: libs Priority: optional Description: Uses ipmitool from freeipmi to check is a system is powered. Useful as master for service dependencies. Package: monitoring-plugins-ipmi-sensor3 Version: 3.14-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 70 Depends: perl:any, freeipmi-tools (>= 0.5.1), libipc-run-perl Conflicts: monitoring-plugins-ipmi-sensor1, monitoring-plugins-ipmi-sensor2 Filename: all/monitoring-plugins-ipmi-sensor3_3.14-2_all.deb Size: 28044 MD5sum: b428844b63df6bc69f88734363b63b25 SHA1: 672fc5723b7dc6bf60397712cc95cb78dea16bdb SHA256: b4d7ac25f3d69af1aa4c47d6bffcd736bd53d3e920eded6716609eb1e35d4e4b Section: net Priority: optional Homepage: https://github.com/thomas-krenn/check_ipmi_sensor_v3 Description: Nagios/Icinga plugin to check IPMI sensors using FreeIPMI This plugin uses FreeIPMI tools to check IPMI sensors. Sensors can be checked all at once, in groups, or individually. Performance data is provided. Package: monitoring-plugins-isg-wpm-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 62 Depends: python3 (>= 3.8) Suggests: bash-completion Filename: all/monitoring-plugins-isg-wpm-sensor_0.2.1-1_all.deb Size: 17650 MD5sum: e852c5f03aff10c295dc7b0e0950c94d SHA1: e01406c091c8133b871663a36c29d06ab2a2e8b3 SHA256: c7bcc54aa2cd8afdd8764d9d5fd67a3d30681dde721df1f84837be5f4777a8a3 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_isg_wpm_sensor Description: Checks Stiebel Eltron heat pumps with WPM via Modbus TCP of the ISG Checks a Stiebel Eltron heat pump with a heat pump manager WPM (WPMsystem, WPM 3, WPM 3i) via the Modbus TCP interface of the Internet Service Gateway (ISG web with the Modbus TCP/IP software extension). Supports checking a numeric value against thresholds (-c may be smaller than -w), that one value stays above or below another by a margin, a boolean expression over pumps and status bits, a regular expression against a coded value such as the operating mode, and faults and bus errors. The plugin only reads registers. Package: monitoring-plugins-jitsi Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: python3-requests Filename: all/monitoring-plugins-jitsi_0-0_all.deb Size: 4948 MD5sum: 9a415defcc70061bde90906f23dd1cda SHA1: 3d50507475254b302734559611780c8041746c8a SHA256: b867a7ec5d9d1e14b0b7965b46df5ad7382184930bc68c460c470cc2ff4fcf8c Section: libs Priority: optional Description: Uses jitsi's JVB API to optain statistics from jitsi services. Package: monitoring-plugins-linux-raid Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Conflicts: nagios-plugins-linuxraid Replaces: nagios-plugins-linuxraid Filename: all/monitoring-plugins-linux-raid_0-0_all.deb Size: 3758 MD5sum: 7354dec782a74433e0364b05d4e1e89a SHA1: cf60e1922836a2e4acea17e4ad4721ba8d0c65a7 SHA256: 3b2dda2ea62292cbd4c1ebc593b33e2edeece7f2a2379203267e971945dadff9 Section: libs Priority: optional Description: This plugin checks the status of a local Linux software RAID via the /proc/mdstat interface. Package: monitoring-plugins-mailq Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: perl, monitoring-plugins-common Filename: all/monitoring-plugins-mailq_0-0_all.deb Size: 7854 MD5sum: a127e46f65e35e37fb7bcdf096ce4b70 SHA1: b98128875b0eb5f880b4727cc6915139098fae52 SHA256: c22e2981c67c5d96bf2e76eca9bdb0805f76dfa0c60da6ced4e3d115442e3753 Section: libs Priority: optional Description: Checks the mail queue length via mailq/qmail-qstat, autodetecting or selecting sendmail, postfix, qmail, exim or nullmailer. Package: monitoring-plugins-mem Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: procps, gawk Filename: all/monitoring-plugins-mem_0-0_all.deb Size: 3250 MD5sum: f6650fded5d79c1b082ac9396477c411 SHA1: e13c6033dd53d21da37b3c67934078afaae941ff SHA256: e41349ca8e9a58eb3584011d668256dfe56826fee73d354a597f2f1563b16445 Section: libs Priority: optional Description: Uses command free to get free (buffered or unused) memory. Package: monitoring-plugins-mqtt Version: 5.1+git20260211.003f5cf-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 32 Depends: python3, python3-paho-mqtt (>= 2) Suggests: python3-jsonpath-rw Filename: all/monitoring-plugins-mqtt_5.1+git20260211.003f5cf-1_all.deb Size: 10532 MD5sum: 5504be2eab1156d1943bc34cba2bebc0 SHA1: faf274efd0341254c61d0af1c55186869e0408a6 SHA256: 04c06f0ae94dad4538725d753a21e42719a7d62f95b0509db54942862b2f6ff4 Section: net Priority: optional Homepage: https://github.com/jpmens/check-mqtt Description: Nagios/Icinga plugin to check a value published on a MQTT broker Subscribes to a topic on a MQTT broker, optionally after publishing to it, and checks that the payload arrives in time and matches given criteria: a value compared with an operator, or a Python expression for warning and critical. The round trip time is reported as performance data. Supports TLS, authentication and MQTT 3.1, 3.1.1 and 5. JSON payloads can be queried with a JSONPath expression when jsonpath-rw is installed. Package: monitoring-plugins-mqtt-topic-age Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 89 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, python3-paho-mqtt, python3:any Suggests: bash-completion Filename: all/monitoring-plugins-mqtt-topic-age_0.2.1-1_all.deb Size: 20454 MD5sum: 478fbc9d786932500a13f6c282b0e3d8 SHA1: 24e7f5f640f8aa77bd41d6557b50cf13db799cd9 SHA256: a3913e9edaedf9a29d9075e31f89f06d680620932bf3c01718f9a1ca2c1973bd Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_mqtt_topic_age Description: Nagios/Icinga plugin to check when messages last arrived on MQTT topics Checks when messages last arrived on MQTT topics, or how many arrived recently. mqtt_message_timestamp_logger, a daemon that runs as a systemd service, subscribes to the topics and records the arrival times in an SQLite database, which check_mqtt_topic_age reads; so the check needs no connection to the broker and cannot miss a message published between two checks. . Topic filters may use the MQTT wildcards, and every topic is checked on its own, so one live sensor cannot hide a dead one. Package: monitoring-plugins-nextcloud Version: 0.4.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-nextcloud_0.4.1-1_all.deb Size: 12192 MD5sum: 8e7fc2fd925abcc6ab5c61ee2b89e8f1 SHA1: e47a8dcc50d60003336327df6d5f7bfbace72703 SHA256: 7253e2cee01a820742f1f87d991ea4714f4ec11d3e0b365afb685781b729b78a Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_nextcloud Description: Nagios/Icinga plugin to check a Nextcloud instance Nagios/Icinga plugin for Nextcloud, written in Python 3 with the standard library only. The health mode reads the unauthenticated status.php, every other mode reads the REST API of the serverinfo app. . Modes: * health: is the instance installed, out of maintenance mode and answering * cpu: the load average of the server * memory: the RAM and swap usage of the server * freespace: the free space of the data directory * storage: files, users, storages and database size * users: the number of recently active users * apps: the number of apps with an available update * rotate: replaces the app password, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-nfs-health Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: gawk, bc Filename: all/monitoring-plugins-nfs-health_0-0_all.deb Size: 5710 MD5sum: c0c3fe953e95708b05a827559e16574c SHA1: 2e6add289e6594fefd7fa2d2f5360be79f3b332e SHA256: 14417d3290f02190ba7aba14d0b084492bc25910a8a8da8428d9133ab41246c4 Section: libs Priority: optional Description: Checks status and health of a nfs server. Package: monitoring-plugins-ntrip-caster Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 50 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-ntrip-caster_0.3.1-1_all.deb Size: 15278 MD5sum: 3b031115d648f4e8d0f1cee36caa7377 SHA1: eb573ea729b9b6afce9e4db1ab2f6d2047d14841 SHA256: 887c7217114c6bc4f6c4a88bd68107817c29a4f083fd53247dc1f33502e09ddb Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_ntrip_caster Description: Nagios/Icinga plugin to check NTRIP casters Nagios/Icinga plugin that checks whether an NTRIP caster serves current GNSS correction data, written in Python 3 with the standard library only. . Modes: * sourcetable: complete sourcetable, caster clock and a listed mountpoint * stream: valid RTCM3 data and the age of the newest observation epoch . The stream mode decodes the observation epochs of GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS and NavIC messages and compares them with the local clock. It also reports the satellites per constellation and the mean C/N0, and can alert on them, on the station position from 1005/1006 and on message types that must arrive. Package: monitoring-plugins-ntrip-clients Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: bash, gawk | mawk, iproute2, sudo Filename: all/monitoring-plugins-ntrip-clients_0.1-1_all.deb Size: 6808 MD5sum: dcd3b3e2e42674a7b982819adee85533 SHA1: d394f0326086820e6ada0ccb435324565c6a7c65 SHA256: 78747c9ed20828322e7a6480d41b619732dd29e9ad3556e48ba7edce88b80258 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_ntrip_clients Description: Nagios/Icinga plugin to check the clients of a local NTRIP caster Checks how many clients are connected to a local NTRIP caster, e.g. RTKLIB str2str with an ntripc:// output as used by RTKBase. str2str accepts at most 32 clients and never times out clients that send no valid request, so scanners can take all slots while the service keeps running. . It reports the accepted clients, the stale clients and the connections waiting in the listen queue. The plugin needs root or the caster's user; a sudoers snippet for the user nagios is included. Package: monitoring-plugins-nvidia-smi Version: 0.1.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 47 Depends: python3 Suggests: bash-completion Filename: all/monitoring-plugins-nvidia-smi_0.1.1-1_all.deb Size: 12888 MD5sum: 3e70a41113f723fa9d8af69d62c6bd2d SHA1: e6f758989d97da0ec0197cabfbeed2e87e592647 SHA256: 32ea468b889da20a0677e0923c27d297fc31cc2370a6dbb4c7cd4b1505ba5202 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_nvidia_smi Description: Nagios/Icinga plugin to check NVIDIA GPUs via nvidia-smi Nagios/Icinga plugin that checks NVIDIA GPUs with nvidia-smi: temperature, power, clocks and the reasons they are lowered, memory, load, fan, PCIe link and ECC, with all values in the performance data. Python 3 with the standard library only. . It supersedes check_nvidia_smi_temperature (monitoring-plugins-nvidia-smi-temperature); both can be installed. . Requires the proprietary NVIDIA driver (providing nvidia-smi) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-nvidia-smi-temperature Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 20 Suggests: bash-completion Filename: all/monitoring-plugins-nvidia-smi-temperature_0.2-1_all.deb Size: 4112 MD5sum: 8c94bb762af49ccd8c0afdfe87223015 SHA1: 0a9170dd64b600764b31dc87cbbb45fef3651b9a SHA256: 0ee5b0580a03d31f6755dae9f02359d5310d04d0a6f432c7c6a4283e86bacba0 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_nvidia_smi_temperature Description: Checks NVIDIA GPU temperatures via nvidia-smi Uses nvidia-smi to check the temperature of one or more NVIDIA GPUs. Requires the proprietary NVIDIA driver (providing nvidia-smi) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-openvpn Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: python3 Filename: all/monitoring-plugins-openvpn_0-0_all.deb Size: 5256 MD5sum: 0e40adf9143cadcaa45f503aac57de6a SHA1: 881f1d1cbf12b55ba2bebcd4fba25e4a3c9ca9e8 SHA256: 9f8cf3ccb5ac4871ec258bd5d2de28754ac2de0d6c45b3f69d727907d10f8cc1 Section: libs Priority: optional Description: Check if an OpenVPN server runs on a given UDP or TCP port. Package: monitoring-plugins-openwrt Version: 0.5.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 66 Depends: python3 (>= 3.7), openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-openwrt_0.5.2-1_all.deb Size: 19752 MD5sum: e57a6edcb36ba0018fd2900635af728c SHA1: 3bed6961ed4c4df9dbdc8278369e4a859faff082 SHA256: 5964d155bf6c13838ca3e9d7202eebb2c5f0d3b77a7c49d7ca90a2b7fae4baea Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_openwrt Description: Agentless Nagios/Icinga plugin for OpenWrt devices via SSH Agentless Nagios/Icinga plugin for OpenWrt devices. All checks run over SSH with tools of a default OpenWrt image (BusyBox, ubus, uci, opkg/apk, and wg for WireGuard), so nothing has to be installed on the device. . Checks: memory, disk, load, uptime, conntrack table, netifd interfaces, wifi radios and clients, WireGuard handshake age, procd services, upgradable packages, banIP block lists, temperatures, and the internet access of the device (DNS, ping, HTTP(S)). Thresholds use the standard range format, and all checks print performance data. Package: monitoring-plugins-part-db Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 63 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-part-db_0.3-1_all.deb Size: 19624 MD5sum: e82c0f8aa7227ab13c69d42daf593bc3 SHA1: 804b2cfbbbd13775c1634cdb17e05519cf5157bc SHA256: f0183b85889a6e6375bbd6b17ec0072cedb2176f627a15013450898edeb56591 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_part-db Description: Nagios/Icinga plugin to check a Part-DB instance Nagios/Icinga plugin for Part-DB (https://github.com/Part-DB/Part-DB-server), usable with Nagios, Naemon, Icinga and anything else speaking the monitoring plugins API. It queries the Part-DB REST API and, for the frontend check, its web UI, so the monitoring host needs only network access and an API token. . Modes of check_part-db: * health: API reachability, token validity, database answer * web: web frontend response and TLS certificate expiry * stats: counts of parts, categories, footprints, suppliers * stock: parts below their configured minimum amount * token: days until the API token expires, CRITICAL below 30 . Only the Python 3 standard library is used. Package: monitoring-plugins-podman Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 31 Depends: python3 (>= 3.7), sudo Recommends: podman Suggests: bash-completion Filename: all/monitoring-plugins-podman_0.2-1_all.deb Size: 9244 MD5sum: 4b8d639064712e90d57164a658219e6c SHA1: 6c263d3c88b19b9d70812a2d227b34109a67efcc SHA256: 7fb10fd034c5e80aeb663e695492149bc4381cacada83f765b4f30fc63852177 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_podman Description: Nagios/Icinga plugin to check the containers of a rootless podman user Nagios/Icinga plugin that checks the containers of a rootless podman user via sudo, written in Python 3 with the standard library only. . It checks that every container is running, reports CPU, memory, network and block I/O usage of each as performance data, and alerts when a container gets close to its memory limit. It needs a NOPASSWD sudoers rule for "podman ps" and "podman stats" as the rootless user, and lingering for that user; see the README. Package: monitoring-plugins-postfix-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: postfix Filename: all/monitoring-plugins-postfix-queue_0-0_all.deb Size: 3330 MD5sum: 63a6671c276295b448ab54bea9f00d76 SHA1: 47574092eba210ccc7777250b042dcbe7ebfc31b SHA256: acf05d9ccaac3ff58b3f9326d52eee7f9ff7344a724fa7394c594401d9e7a44f Section: libs Priority: optional Description: Uses mailq to check the length of the queue of postfix. Package: monitoring-plugins-postfix-relay Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 29 Depends: postfix, python3 (>= 3.7) Recommends: sudo Suggests: bash-completion Filename: all/monitoring-plugins-postfix-relay_0.2-1_all.deb Size: 8866 MD5sum: cf99a225bf0858802065a519b808bed3 SHA1: 6e7a2cc7d4989b9604c491d3f74c77c727a29086 SHA256: 575a5820604269b5d9bc65dbc70671b201f41368fcfc18f1b3c6ec237cfea297 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_postfix_relay Description: Nagios/Icinga plugin to check that Postfix can log in to its relays Nagios/Icinga plugin that checks that Postfix can log in to the relays it sends through, written in Python 3 with the standard library only. . It tests the relayhost and every relay in sender_dependent_relayhost_maps: connection, STARTTLS and SASL login with the credentials Postfix itself would use (also by sender, smtp_sender_dependent_authentication), and optionally MAIL FROM/RCPT TO without sending. Relays and logins come from the Postfix configuration, so no password is needed in the monitoring configuration. It needs root for the SASL password map, e.g. through a NOPASSWD sudoers rule; see the README. Package: monitoring-plugins-printer-php Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 47 Depends: php-cli, php-snmp Suggests: bash-completion Filename: all/monitoring-plugins-printer-php_0.2-1_all.deb Size: 14290 MD5sum: 9b955def6aa5633a6e91bf814c5231ee SHA1: a5beed6f171ab590d5ecc4917a4ae42b2ed9a077 SHA256: 69958f5990e09b6a8418109984f5940184c7cf997d061b16e22d7c2c99272c05 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_printer Description: Nagios/Icinga plugin to check a printer via SNMP Checks a printer via SNMP: toner and ink levels, paper trays, covers, hardware, the alert table and page counters. It uses the standard Printer-MIB and Host Resources MIB, so it works with most network printers, plus private MIBs of Ricoh and Kyocera. . Named check_printer.php (not check_printer) since Debian's monitoring-plugins-contrib package already ships its own, different, check_printer. Package: monitoring-plugins-proxy Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: wget, bc, gawk Filename: all/monitoring-plugins-proxy_0-0_all.deb Size: 4298 MD5sum: b944683fea687fb8e514cb55d32148b2 SHA1: bd588f54a4e0a9552b9cda9f6d308327555bf35d SHA256: 575967b0e4d156af0d48e8b79974ada33217eecd0802d549f3af9ba0457bfb89 Section: libs Priority: optional Description: Uses wget to obtain a file directly and through a proxy. Then it compares if the files are identical. Caution: lot's of websites include the time in their source code. These will be always different. Package: monitoring-plugins-psu-power Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 26 Depends: bash, coreutils, gawk | mawk, grep, ipmitool, sudo Suggests: bash-completion Filename: all/monitoring-plugins-psu-power_0.2-1_all.deb Size: 8994 MD5sum: 3444ac80be6e874dfe39d61266d86ea0 SHA1: ce18b43d117e632a68d81147da23db4e699f872d SHA256: 6ae7605791c4564f9cacdd218ae2182331b4974a675e86fe17b74244d7078327 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_psu_power Description: Nagios/Icinga plugin to check power consumption and PSU health via PMBus Nagios/Icinga plugin that reads the power supplies of a server over the BMC with IPMI Master Write-Read (PMBus): input power of each PSU and their sum, input voltage, temperature and fan speed, with thresholds for the total power and performance data. . ipmitool needs root (/dev/ipmi0), so the plugin calls it through sudo; the README has a sudoers example that allows only the PMBus reads. The probe script in the documentation finds the PSU addresses on the I2C bus. Package: monitoring-plugins-raspberry-voltage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-raspberry-voltage_0-0_all.deb Size: 3628 MD5sum: 2ad352d65991ea4b796e40b195eba4f7 SHA1: f9145216749876ea55ba1c04735c935d186cec00 SHA256: 30d77435e17da52a48f6294cb5801050d364732153f527b0507017e62b488a2a Section: libs Priority: optional Description: Uses vcgencmd to report the core, sdram_c, sdram_i and sdram_p voltage rails as performance data, and checks vcgencmd get_throttled for under-voltage of the power supply. Requires vcgencmd (provided by Raspberry Pi OS's userland tools) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-remote-load Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 20 Depends: bc, openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-remote-load_0.2-1_all.deb Size: 4010 MD5sum: 2211113c512a74faff3aebd416f67cc1 SHA1: 05ae86bf9647be5dbc6496c4c39aacf593f576dc SHA256: 0a05bef55c030712d1086994bb07049576c46fcffa3ee26aa27e9b761449882c Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_remote_load Description: Check /proc/loadavg via ssh Connects via ssh to a remote machine, reads /proc/loadavg, and checks the 1 m, 5 m and 15 m averages. Package: monitoring-plugins-reprise-server Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 33 Depends: python3 (>= 3.7) Recommends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-reprise-server_0.2-1_all.deb Size: 9626 MD5sum: fa4141f8908609bf63bc94f2966eddde SHA1: 7fefbd1dab1c4e18a150aa4dd46b1306bc1d08a8 SHA256: 8d47c6d60e7c925a6368be324e7f55e2b445ba5af0f0fd5094ae0ea584a8b2be Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_reprise_server Description: Nagios/Icinga plugin to check Reprise License Manager servers Nagios/Icinga plugin that checks a Reprise License Manager (RLM) server with rlmutil, written in Python 3 with the standard library only. . It checks that the rlm server and its ISV servers are up, reports the usage of every product as performance data, and alerts on the days until the earliest expiry of any product. rlmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-sensor Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 29 Depends: jq, lm-sensors Suggests: bash-completion Filename: all/monitoring-plugins-sensor_0.1-1_all.deb Size: 7286 MD5sum: 2b374bf5c075d38389f251fae8327269 SHA1: e29347dce0b8b3209eb0a41cdce881d00e19d008 SHA256: 46c4bb3921451295493678b522d2ba4d17d1773ef44365432e5d476ea9a0fb32 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_sensor Description: Nagios/Icinga plugin to check hardware sensors read by lm-sensors Checks a hardware sensor read by lm-sensors, such as a temperature, fan speed or voltage, against the limits and alarms of the chip or against given levels, with the value in the performance data. It reads the JSON of both newer (sensors -J) and older (sensors -j) lm-sensors, and lists the sensors with -l. Package: monitoring-plugins-smb Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: smbclient, monitoring-plugins-common Filename: all/monitoring-plugins-smb_0-0_all.deb Size: 3044 MD5sum: 067d65c2ee1a38bc465da083540af9c5 SHA1: cb4ba4630601b2049141d1ea6891611f54fd162d SHA256: 99d1fc9c80fe0b59d2aa6b3c60345c61e2ca54c52ad232d777e54ea0c629deaf Section: libs Priority: optional Description: Uses smbclient to connect anonymously to a samba server. Package: monitoring-plugins-snmp-printer-supply Source: monitoring-plugins-snmp-printer Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: snmp Suggests: bash-completion Filename: all/monitoring-plugins-snmp-printer-supply_0.3-1_all.deb Size: 5286 MD5sum: c47821dc9ee78362400378786e6e178d SHA1: a3004939cca7327f310f9c845217d08f80d23c82 SHA256: 3d06270511b7b5b8ff110309419dfb78219f5660e44f9c91c71cf24786af099a Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_snmp_printer Description: Checks the supplies and trays of a printer via SNMP Uses snmpwalk to connect to a printer and check its supplies and the paper level of its trays. Package: monitoring-plugins-ssh-date Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: python3, openssh-client Filename: all/monitoring-plugins-ssh-date_0-0_all.deb Size: 3276 MD5sum: 5a18ad627023a415c9734eabb81c64e9 SHA1: 3f9e7db7eed206d0411a4ad5b5ef5542464857ae SHA256: 578d976875724ab9cbffdf2387312b241586c04b6b5778711abe7ebf2930a0d4 Section: libs Priority: optional Description: Uses ssh to run "date -R" on a remote host and compares the result to the local date and time to detect clock drift. Package: monitoring-plugins-ssl-cert Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 292 Depends: openssl Filename: all/monitoring-plugins-ssl-cert_0-0_all.deb Size: 49512 MD5sum: fd2027a5f283676a33ad07fb704c060c SHA1: e8550fa7b96381854e3759bff0709fd7ba991367 SHA256: cae0d3bc63eda7486550e7b127633ce74904ad1a57b4865aceb8e90a351e228d Section: libs Priority: optional Description: Uses openssl to check validity, expiration and other properties of X.509 certificates. See https://github.com/matteocorti/check_ssl_cert. Package: monitoring-plugins-storcli Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: bash, coreutils, grep, jq, sudo Suggests: bash-completion Filename: all/monitoring-plugins-storcli_0.2-1_all.deb Size: 9018 MD5sum: b31e4026a14270ea963e81af648176cf SHA1: 1512502777ddc62654bcf14c3f672dab5e8638b4 SHA256: 0163964a166b1cbfb121eb270e279daa5bec53afacf5b245a35b2de0d81a7f0d Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_storcli Description: Nagios/Icinga plugin to check MegaRAID controllers via storcli Nagios/Icinga plugin that checks Broadcom/LSI MegaRAID controllers with storcli64: controller, virtual drive and physical drive states, media and other errors, predictive failures, and the temperatures of the drives and the controller (ROC), with performance data. . storcli64 itself is not included; install it from Broadcom. storcli needs root, so the plugin calls it through sudo; the README has a sudoers example that allows only the two read-only calls. Package: monitoring-plugins-stun-turn Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-stun-turn_0.2.1-1_all.deb Size: 11414 MD5sum: 57245e3afe80797428797c716704c908 SHA1: 95116b20598678c9c4e395e86528568b35c2769c SHA256: aed80f4fe8876fedcbd4038760f97b64f8a640bfa8d9365e0a9a8eed1fa7b50b Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_stun_turn Description: Nagios/Icinga plugin to check STUN/TURN servers Nagios/Icinga plugin for STUN/TURN servers such as coturn, written in Python 3 with the standard library only. . Modes: * stun: binding request, mapped address and response time * turn: authentication challenge, or with credentials (long-term or the shared secret of the TURN REST API) a relay allocation that is released again . Both modes work over UDP, TCP and TLS and check the TLS certificate. Package: monitoring-plugins-systemd Version: 5.0.0-0 Architecture: all Maintainer: Debian Python Team Installed-Size: 83 Depends: python3 (>= 3.9), python3-nagiosplugin, systemd, default-dbus-system-bus | dbus-system-bus Suggests: python3-gi Filename: all/monitoring-plugins-systemd_5.0.0-0_all.deb Size: 18488 MD5sum: d2c413e9af9cb78d1fcc3337d4e8acef SHA1: 12f7ecf9a6b66d7b1249af470b3ee25879a055f3 SHA256: 32092a4b2914d1b819f8fedb22e70a99f32b59c379c0f126de4d7f4bce0e87ae Section: net Priority: optional Homepage: https://github.com/Josef-Friedrich/check_systemd Description: systemd plugin for nagios compatible monitoring systems This systemd check for nagios compatible monitoring systems will report a degraded systemd to your monitoring solution. It can also be used to monitor individual systemd services and timers units. Package: monitoring-plugins-systemd-service Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-systemd-service_0-0_all.deb Size: 3228 MD5sum: 33e732cd6be3e6a07d36b8d7e5b9d88a SHA1: f59895cb4c2b0f3b1cfabb918fd34fd386dc7e07 SHA256: d8c72a3ebcd8624394e676519dbe281ddf150c6ecaaaa1696d4276fba0d61ffb Section: libs Priority: optional Description: For a *.service it checks if it is prestent, enabled and alive. Extension for openSUSE: also check is a mountpoint is active. Package: monitoring-plugins-systemd-sh Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: openssh-client, systemd Suggests: bash-completion Filename: all/monitoring-plugins-systemd-sh_0.3-1_all.deb Size: 5686 MD5sum: 4de075628f98a3db2c60c84ca4c43d71 SHA1: 682d2f7a8122f6ffada2173a3384e42f784f58ba SHA256: 71eac7676485dfcf0ae907ba6d62050d4c75beb4580bbe21cd3671cb3fa4ed03 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_systemd.sh Description: Nagios/Icinga plugin to check failed systemd units and the boot time Checks systemd on a local or remote machine via systemctl: the boot time, failed units, and services that have to be running. Package: monitoring-plugins-tasmota-sensor Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 42 Depends: python3 (>= 3.8), python3-requests Suggests: bash-completion Filename: all/monitoring-plugins-tasmota-sensor_0.3.1-1_all.deb Size: 12188 MD5sum: 27a569a5f4fe34f83acffdab4bae8ca4 SHA1: b0ec803bf582dd17e42102a6eb56bd067422a8f9 SHA256: 0d66cbb3b567fcc0aa71f66cb3cfae149ea79a6b253b607759b9824687457d64 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tasmota_sensor Description: Checks Tasmota devices via the HTTP command API Checks Tasmota devices via the HTTP command API (/cm?cmnd=...). Supports checking a numeric sensor value against thresholds (-c may be smaller than -w), the time offset of the device's own reported time against the local clock or an NTP server, a boolean expression over POWER-style relay states, and a regular expression match against a sensor field's value. Package: monitoring-plugins-tftp Version: 0.1.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: tftp-hpa Suggests: bash-completion Filename: all/monitoring-plugins-tftp_0.1.2-1_all.deb Size: 5244 MD5sum: 888ada32ed101818c569910f3be2396c SHA1: 2e6474adc7cfd95c1fcb027934eb2ce2d0b30ceb SHA256: 900f3969f72cbc2aef4ef8e8722030c2453aa71614cae7d93c47f1a2b08b1fdd Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tftp Description: Nagios/Icinga plugin to check that a TFTP server serves a file Checks a TFTP server, e.g. for PXE boot, by downloading a file with the tftp-hpa client. A file that is served is OK, a TFTP error such as "file not found" is a WARNING, and no answer is CRITICAL. The download time and the file size go into the performance data, with thresholds for both. Package: monitoring-plugins-thermal-zone0 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-thermal-zone0_0-0_all.deb Size: 3266 MD5sum: 38b4e879c63a45b8de6185cb440f9d9b SHA1: d261f582aa276bcffd7a63748494ec52d4c55bb1 SHA256: b3e8c6c3102fe40b66c42ab60ee325a3b6a3efcaac732c5db99fe00c5e83b586 Section: libs Priority: optional Description: Reads /sys/class/thermal/thermal_zone0/temp to check the SoC/board temperature, as found on Raspberry Pi and many other ARM boards. Package: monitoring-plugins-tor-proxy Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: curl | wget Suggests: bash-completion Filename: all/monitoring-plugins-tor-proxy_0.3-1_all.deb Size: 6294 MD5sum: 5de0ad6543646467218ca5cbe21c043d SHA1: ed57b6d2c808400b749b1880644c30cc3bd40a92 SHA256: fb20dafaed6a4250308041156f083c70b87572ce934020d2c9f16f17b0ee2fc5 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tor_proxy Description: Nagios/Icinga plugin to check that a proxy exits to the Tor network Nagios/Icinga plugin that checks whether a proxy exits to the Tor network, by asking the check service of the Tor Project through it. Works with SOCKS proxies such as Tor itself and HTTP proxies such as Privoxy in front of Tor, using curl or wget; SOCKS proxies need curl. Package: monitoring-plugins-ts3 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: expect Filename: all/monitoring-plugins-ts3_0-0_all.deb Size: 3262 MD5sum: 2d88fdb5c6af30f03afefc0586718051 SHA1: 9ed9d6d7e708370367156736aa0b16ea8318a714 SHA256: 09486d62f22738927111b668223404f48eee0e9d514afe59c801bdc434acbc98 Section: libs Priority: optional Description: Connects to the dataport of a teamspeak server and checks for its characterstic respone. Package: monitoring-plugins-vdr-diskusage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, gawk Filename: all/monitoring-plugins-vdr-diskusage_0-0_all.deb Size: 3646 MD5sum: 13ddb31960165727261e13e4727d922c SHA1: b80973cc8a77bc07145289aaa7b2bfe256906a1c SHA256: 585b066d2c614a70046c1beb4cb4381d18f7edf89fbfcbdfa9481e35adbeea41 Section: libs Priority: optional Description: Uses svdrpsend to check disk utilization of VDR. Package: monitoring-plugins-vdr-signalstrength Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, vdr-plugin-femon Filename: all/monitoring-plugins-vdr-signalstrength_0-0_all.deb Size: 3874 MD5sum: f21773d6448658b869c9f867505a8b8b SHA1: 65112d08594efd0ea1b4625072c086bfc73c2327 SHA256: 822a62f67b593ed1c22407044346bf6bc36682cceece8006f7f1eeffbfc65f82 Section: libs Priority: optional Description: Uses svdrpsend to connect to a VDR using the femon plugin. Package: monitoring-plugins-zyxel-hw-monitor Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 68 Depends: snmp, gawk | mawk Recommends: python3 Suggests: bash-completion Filename: all/monitoring-plugins-zyxel-hw-monitor_0.2-1_all.deb Size: 9170 MD5sum: 0e9412336f0b167cb0e43734516cc1fd SHA1: 432de0b47b9c76d5dc655b8c758dc52a27f1e8b2 SHA256: a5693e2dcafb1fb9545a8ec5ad14e7026f25ad3be8fc2f150bc932d6dda8f28a Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_zyxel_hw_monitor Description: Nagios/Icinga plugins to check Zyxel devices via SNMP Plugins for monitoring Zyxel devices via SNMP, based on the ZYXEL-HW-MONITOR-MIB and ZYXEL-ES-COMMON MIBs. They are compatible with Nagios, Icinga and other monitoring systems supporting Nagios plugins. . Included checks: * check_zyxel-cpu: CPU usage (%) * check_zyxel-mem: memory usage (%) * check_zyxel-flash: flash usage (%) * check_zyxel-fan: fan RPM (indexed sensor) * check_zyxel-temperature: temperature (indexed sensor) * check_zyxel-voltage: voltage (indexed sensor) * check_zyxel-power: power source status (indexed source) * check_zyxel-time: switch time skew against an NTP server or local time . All plugins use numeric OIDs, so no MIB files are needed on the monitoring host. SNMPv2c and SNMPv3 are supported. Package: mqtt2logger Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 64 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, python3 (>= 3.7), python3-paho-mqtt, python3-yaml Suggests: bash-completion Filename: all/mqtt2logger_0.2.1-1_all.deb Size: 15812 MD5sum: e4e64a0d3e86bd40b4eb502844d7e587 SHA1: 106aae3207ea9cb0ea8cd80426787a063ff8f62c SHA256: f5eda81fa9e52909529a91f5e55ba08c68986c76628d73f4f3973b41da24981a Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/mqtt2logger Description: Forward the MQTT logs of ESPHome and Tasmota devices to rsyslog and journald Subscribes to the log topics of ESPHome and Tasmota devices on an MQTT broker and forwards each log line to rsyslog (RFC 5424, with the device as host name) and to systemd-journald, each configurable. Severity and time stamp are taken from the messages where they contain them. A persistent MQTT session lets the broker keep QoS 1 messages while the daemon is down, and queues keep messages while rsyslog or journald are unavailable. The systemd service runs as the user mqtt2logger and is not enabled by default. Package: purge-postfix-mails Version: 0.4-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 24 Depends: jq (>= 1.6), postfix (>= 3.1) Suggests: bash-completion Filename: all/purge-postfix-mails_0.4-1_all.deb Size: 4934 MD5sum: 55cdfd54f1d8f7b6f0d2ac5bf456408d SHA1: 23de33c5ade0eabc00aae8efae7dd09461808e40 SHA256: 96137eefe1edd1a7f106944f90b209dfbcc972f8fba8c9108fbb6096fa7b6f2d Section: mail Priority: optional Homepage: https://github.com/Aikhjarto/purge_postfix_mails Description: Scripts to break a mail loop by purging undeliverable mails from Postfix Scripts that break a mail loop in Postfix, as caused by a machine mailing its admin about every logged error while the relayhost is unreachable, by deleting the queued mails that cannot be delivered: * purge_postfix_mailer_daemon.sh deletes bounces, mails to postmaster@myorigin and queued mails that mention postmaster or MAILER-DAEMON of myorigin * purge_postfix_mails.sh additionally deletes deferred mails the relayhost refused * purge_postfix_per_recipient.sh deletes the mails to given recipients * purge_postfix_per_sender.sh deletes the mails from given senders Package: rapl-mqtt Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: python3 (>= 3.9), mosquitto-clients Filename: all/rapl-mqtt_0.1-1_all.deb Size: 5722 MD5sum: 34b0decc3c13d7ac83acf6dee3f6889d SHA1: f738e3369cacc3abaf3084eddc8c66b02cf9d248 SHA256: 5fa35a97039202730dc3527b48796e424c8357da20cbf2917c16e48af9ea1dca Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/rapl-mqtt Description: Publish the CPU's RAPL power to MQTT Reads the energy counters of the CPU's RAPL (Intel since Sandy Bridge, AMD since Zen) and publishes the average power of each zone (package, cores, DRAM) in watts to an MQTT broker, once a minute. Home Assistant MQTT discovery configs are published too, so the zones show up as power sensors. . Options for the service go into RAPL_MQTT_OPTS in /etc/default/rapl-mqtt, e.g. RAPL_MQTT_OPTS="--broker mqtt.example.lan"; the default broker is localhost. The service is not enabled on installation. Package: rsyslog-maillog Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 33 Depends: rsyslog Filename: all/rsyslog-maillog_0.1-1_all.deb Size: 7104 MD5sum: a3867f894b91e028632112cb82cd7890 SHA1: 7facd974b0dc3ad2c7f72244743829401b190236 SHA256: 428168cad4cd09349a52d72dfda3dea1f93982e65dc2854b3dd8b9b12e79fe1d Section: admin Priority: optional Homepage: https://github.com/Aihjarto/rsyslog-maillog Description: This project provides a config for forwarding important log lines in rsyslog via postfix. Package: vdradmin-am Version: 3.6.13-1.1 Architecture: all Maintainer: Debian VDR Team Installed-Size: 1360 Depends: perl:any, libio-compress-perl, libtemplate-perl, liburi-perl, libio-socket-inet6-perl, libsocket6-perl, liblocale-gettext-perl | libintl-perl, libwww-perl, adduser, libtemplate-plugin-javascript-perl, libcgi-pm-perl Suggests: vdr (>= 1.7.15), libauthen-sasl-perl, vdr-plugin-epgsearch (>= 0.9.23) Conflicts: vdradmin Replaces: vdradmin Provides: vdradmin Filename: all/vdradmin-am_3.6.13-1.1_all.deb Size: 290322 MD5sum: 4da3919315ab1de8a3f6607941452675 SHA1: 9c20d96f3717d97830e1d08dd5cba6c084264360 SHA256: 8fbce73f7a8e9a16ee1e4fbc893c3d3a3d884e46a1363df6438825b4105c3cf8 Section: video Priority: optional Homepage: http://andreas.vdr-developer.org/vdradmin-am/index.html Description: Web-based administration tool for vdr vdradmin-am provides a webinterface for managing the Linux Video Disk Recorder (vdr) Package: vm-boot-order-2 Version: 0.3.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 42 Depends: python3 (>= 3.7), python3-libvirt Recommends: sysstat Suggests: bash-completion Filename: all/vm-boot-order-2_0.3.2-1_all.deb Size: 11834 MD5sum: 5b63e06da52b0e844dad68b82bc9369b SHA1: 1711f7fdc94da35f78bc06cc250e34dfb30420d1 SHA256: cceac9c5c027c784f1794cbe8664175b918bbf820c640b48b3b5e245d4ec18d3 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/vm-boot-order-2 Description: Start libvirt VMs in order at boot and shut them down in parallel Starts libvirt VMs one after another in a configured order at boot, and shuts them down in parallel at system shutdown. After starting a VM, it waits up to a configured time, or until the I/O load of a configured disk drops, before starting the next one. At shutdown, VMs that do not stop within a timeout are powered off. . The service is installed but not enabled. Configure the VMs in /etc/vm-boot-order-2.conf, check it with "vm-boot-order-2.py status", and disable libvirt autostart for those VMs.