Package: block-badips Version: 0.8.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 56 Depends: bash, ipset, iptables, curl | wget, util-linux, grep, coreutils, sed, gawk | mawk Suggests: bash-completion Filename: all/block-badips_0.8.0-1_all.deb Size: 17076 MD5sum: d98b44230f1e429c59e3a633b61a90ed SHA1: 15f5d2360e5f28b92380d144c8cd433196ac106c SHA256: 7aeec87e041e87cf2289a074c9ef72e95697033211a30ecd103adbd37a73a6b4 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Block IPs of known brute-force attackers Downloads a list of IPv4 and IPv6 addresses and ranges, by default from blocklist.de, loads it into ipsets and drops their traffic with one iptables rule per address family in the PREROUTING chain of the raw table. Invalid, too broad or suddenly much shorter lists are refused. Package: blocklist-updater Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 56 Depends: python3 (>= 3.9) Suggests: bash-completion Filename: all/blocklist-updater_0.2-1_all.deb Size: 13450 MD5sum: 4de4be10fdaccc312896f0cfd35f37ef SHA1: b44ba7c1dab68e2a945e283cad53d909e3c33a43 SHA256: b6d207f8096f6604bbb5126d5dd3605ac061bb0fcb373ca18c9d825d3cabe239 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/blocklist-updater Description: Download, validate and merge IP blocklists Downloads IP blocklists from several providers (Spamhaus DROP, AbuseIPDB, blocklist.de, CINS Army, Emerging Threats, GreenSnow, DShield and others), validates them and merges them into one list, e.g. for block-badips. Broken downloads keep the previous list, private, reserved and own networks are never published, and stale lists age out. . Each provider is a section in /etc/blocklists/blocklists.conf and is switched on by enabling its timer update-blocklist@
.timer. No unit is enabled on installation; the units run as www-data. Package: cron-check-nagios Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: monitoring-plugins-nagios, mailx, cron Filename: all/cron-check-nagios_0-0_all.deb Size: 2958 MD5sum: c2dff4be8d4bb603d57a5f2d5dceb318 SHA1: 9ecc933360bf6608e8151cbd659b99070abb0aca SHA256: 4dcc2d7e6861fe16edfc4d1674e9a99150bfd22757aa87d3dc6b4c274dea90e3 Section: libs Priority: optional Description: Provides a script that can be executed via cron to see if nagios is still up and running. If nagios is down or last log entry longer than a minute ago, a mail is sent to root. Package: iipsrv Version: 1.3-1 Architecture: amd64 Maintainer: Thomas Wagner Installed-Size: 444 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, libavif16 (>= 1.0.4), libc6 (>= 2.38), libfcgi0t64 (>= 2.4.2), libgcc-s1 (>= 3.3.1), libgomp1 (>= 4.9), libjpeg8 (>= 8c), libmemcached11t64 (>= 1.1.4), libopenjp2-7 (>= 2.0.0), libpng16-16t64 (>= 1.6.2), libstdc++6 (>= 11), libtiff6 (>= 4.0.3), libwebp7 (>= 1.3.2), libwebpmux3 (>= 1.3.2) Filename: amd64/iipsrv_1.3-1_amd64.deb Size: 177326 MD5sum: 031431efbad5609f424cd913da16a6ce SHA1: 44478897964c4dcf8cd9b60be3abfa04b8310b36 SHA256: 17e48d8e88803bf18b21b20d820c0fd75edbc061bab2ec3446f6a4217e6dd065 Section: web Priority: optional Homepage: https://iipimage.sourceforge.io Description: IIPImage server for high resolution images iipsrv is a fast FastCGI image server for streaming and dynamically transforming high resolution and scientific images. It speaks the IIP, IIIF, Zoomify and DeepZoom protocols and reads tiled multi-resolution TIFF and JPEG2000 images; output can be JPEG, PNG, WebP, AVIF or TIFF. . It runs behind a web server such as Apache, nginx or lighttpd through FastCGI. The iipsrv.service unit starts it as a standalone FastCGI daemon listening on port 9000; settings go to /etc/default/iipsrv. . This is a newer upstream release than the iipimage-server package of the distribution, installed as /usr/sbin/iipsrv. Package: journald-remote-follower-rsyslog Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 39 Depends: python3 (>= 3.7), python3-systemd, systemd-journal-remote Recommends: rsyslog-relp Filename: all/journald-remote-follower-rsyslog_0.1-1_all.deb Size: 9632 MD5sum: fe10af471b1727de75cbb72e4aa39706 SHA1: 341933b3b6810b6662f12d8a2a4c462ffa0a66ad SHA256: f6c91c0056e6a213bf829e56f710ede4fd0192ff07c5071b79222e6c8b666fb6 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/journald-remote-follower-rsyslog Description: Forward systemd-journal-remote journals to rsyslog in arrival order rsyslog's imjournal with Remote="on" merges the local and the remote journals by time and skips entries that are uploaded late. This program reads only the journals that systemd-journal-remote receives, follows them in the order the entries were written and sends every entry to rsyslog's imrelp input. The journal cursor is saved only after rsyslog acknowledged the entries, so delivery is at least once. A backfill mode sends the entries of a time range that are missing from rsyslog's per-host files. . The service is installed but not enabled; rsyslog has to be configured first, see the example in the documentation. Package: kvm-guest-update Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: bash (>= 4), coreutils, jq, libvirt-clients, bsdutils Suggests: bash-completion Filename: all/kvm-guest-update_0.3-1_all.deb Size: 14842 MD5sum: c76b706e35086cfe3436966a33c45279 SHA1: 73ce8ffd0619ac3f85292ed2f56c3ff56309a16c SHA256: 737d5a9109a41c35a3a2678ffd4298bb157580eb66985302b95899720485a379 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/kvm-guest-update Description: Update Debian and openSUSE Leap VMs through the QEMU guest agent Updates the running Debian and openSUSE Leap VMs of a KVM host through the QEMU guest agent, so no SSH access or password is needed in the VMs. . Each VM is checked before its upgrade and skipped if the package manager would ask a question (changed conffiles, dependency problems, packages to be removed, licenses). Skipped VMs are logged with priority err for a log monitor. Afterwards every VM is checked for a needed reboot; VMs are never rebooted. The upgrade runs in each VM as a transient systemd unit, so it finishes even when the guest agent is upgraded or the script interrupted. Hooks in the VMs can run commands before and after the upgrade. Package: logherald Version: 0.3.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 117 Depends: python3 (>= 3.7), python3-yaml, systemd Recommends: go-sendxmpp Suggests: bash-completion, rsyslog Filename: all/logherald_0.3.2-1_all.deb Size: 32208 MD5sum: d764c1e661b7dbfc41ccc324363771d7 SHA1: c46c976cc119c725af21a5254779d4e5bd9a7f5b SHA256: 3eed39d5772ee8ea2d3bdffb4716c0fb7b4755725d601b6edc64690393e777e6 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/logherald Description: Filtered log messages by mail and XMPP, as digests and in batches Selects log messages by severity and by include and exclude rules on host, program, facility, message and systemd unit, and sends them by mail and XMPP (go-sendxmpp). "logherald digest" sends a digest of a time span from the systemd journal and the files rsyslog writes, with messages in both counted once; a systemd timer runs it every hour, not enabled by default. "logherald stream" reads the messages rsyslog's omprog writes to its stdin and sends them in batches, after a number of messages or seconds; an example rsyslog configuration is included but not activated. Package: monitoring-plugins-apcaccess Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: apcupsd, python3 Filename: all/monitoring-plugins-apcaccess_0-0_all.deb Size: 3424 MD5sum: f6de5a151aa88e12486b154c1ae008c2 SHA1: 4167ea447d0ad3a02d2b1bf6812bdca77a48b449 SHA256: a788daba026df9443d221e8b027be8671e7324c97ebccdf78b314d2b33b46a5c Section: libs Priority: optional Description: Uses apcaccess to retrieve data from a running apcupsd. Package: monitoring-plugins-bareos-job Version: 1.2-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 271 Depends: python3 (>= 3.7), python3-psycopg2 Filename: all/monitoring-plugins-bareos-job_1.2-2_all.deb Size: 231240 MD5sum: 69473e4ade4c8df7449a004dfc5486c0 SHA1: fee48c7965d56fed53b23272824b59f6b5030493 SHA256: 52a2c90e3a982654d54f4e6342298780dc79aed27b22306213da0247dcf2e41e Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-job Description: Nagios/Icinga plugin to check a Bareos backup job Checks a specific Bareos backup job via the Bareos PostgreSQL catalog, optionally only its most recent run, and reports files, size, duration and age as performance data. Package: monitoring-plugins-bareos-pool Version: 1.0-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 43 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-pool_1.0-2_all.deb Size: 14650 MD5sum: b6bcd97f5ca8a210dd548f76a11b223e SHA1: 3ead4912fff61c0feac40842e13ca974adc1c673 SHA256: 98d4ebb51def9ea00d83d6ed429e557ed1c5762586778913802e15a304287b9b Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-pool Description: Nagios/Icinga plugin to check the tapes in Bareos pools Checks the number of tapes in a Bareos pool via the Bareos PostgreSQL catalog, and the number of volumes overdue for recycling back to the scratch pool. check_bareos_pool_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-bareos-tape Version: 1.1-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-tape_1.1-2_all.deb Size: 14972 MD5sum: 99e3f9e0afae1f634bed9d9c3e2d7828 SHA1: 1a81bd1d4822a3d6a096ded16f371df110cc98f9 SHA256: 42a4ef06a2816cf4feb6a5430e54b4777ea1b370afd67aedb5dfbdf0418b6ded Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-tape Description: Nagios/Icinga plugin to check the lifecycle of Bareos tapes Checks the lifecycle state of Bareos tape volumes via the Bareos PostgreSQL catalog: recycle count, mount count, write errors, tape age and volume status. check_bareos_tape_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-block-badips Source: block-badips Version: 0.8.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 24 Depends: sudo, bash, grep, ipset, iptables Suggests: bash-completion Filename: all/monitoring-plugins-block-badips_0.8.0-1_all.deb Size: 5372 MD5sum: 1d7e716c38c2dc5e9236bb469677195e SHA1: bb82994bb23d6138a3b57d2a93449883b92f3dd1 SHA256: 82a77490b47d2e09b5e386c77775a22fee14a895e6e9fa023f4a10da584cf7d1 Section: libs Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Nagios/Icinga plugin to check the blocklists of block-badips Checks the number of blocked entries, the age of the last update, ipsets that no rule uses and nearly full ipsets. A sudoers snippet for the user nagios is included. Package: monitoring-plugins-btrfs-sysfs Version: 0.4-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 45 Depends: python3 (>= 3.7), util-linux Recommends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-btrfs-sysfs_0.4-1_all.deb Size: 13968 MD5sum: 3e254395b09c43d653b21cb35e28db18 SHA1: 4e69289c5e8155f279dcb52887f06d625a5631a1 SHA256: 152e65b6dc9777704f6cbef65abede42af6e05694485b1f76e6b0d50a8a3227a Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/check_btrfs_sysfs Description: Nagios/Icinga plugin to check btrfs space and device errors without root Monitoring plugin for btrfs file systems. It reads /sys/fs/btrfs, which every user can read, so it needs no root, no sudo and no btrfs ioctls. It checks the local machine, or a remote host over SSH, where nothing has to be installed. . It checks the unallocated space, the metadata usage including the global reserve, optionally the data usage, the error counters of each device and the quota (qgroup) limit of the mounted subvolume, and hints at a balance when allocated data chunks are mostly unused. Package: monitoring-plugins-cups-printer Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: cups-client Filename: all/monitoring-plugins-cups-printer_0-0_all.deb Size: 3092 MD5sum: 1fe0b4d111a268f728e4d7fccf1aa79d SHA1: 38ffd095a8c0a306547d8cd14c836a948fb4705e SHA256: 02486f239dc44146be3dad7725ae7f0fd55a76787b1db20e256a398fa73f379c Section: libs Priority: optional Description: Checks if cups provides a certain printer. Package: monitoring-plugins-cups-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: cups-client Filename: all/monitoring-plugins-cups-queue_0-0_all.deb Size: 4302 MD5sum: aebbad5b56e22c8137ed23a336a2452d SHA1: 406255358df9358011ecbe94d727810cf3c075de SHA256: d1aec9a20fb3dc4bfe58bb0ff93d49b8e299510bb0d7bc081318565f239c9ea4 Section: libs Priority: optional Description: Checks the length of a printer queue in cupsd. Package: monitoring-plugins-dd-wrt-inet-access Source: monitoring-plugins-dd-wrt Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-dd-wrt-inet-access_0.2-1_all.deb Size: 3304 MD5sum: 30bfac9924a7b6af7ed20728bcb293ca SHA1: 1ece37d936541c38dbb2b6235f12486071830136 SHA256: f50b86b3bf6f239b57540a33153927c3ad5ec7c083db7c9523a191ca7b7a473f Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check if a router running dd-wrt has internet connection Logs in via ssh on a router running dd-wrt and tries to access a certain website with w3m to check if internet access is given. Package: monitoring-plugins-dd-wrt-ps Source: monitoring-plugins-dd-wrt Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-dd-wrt-ps_0.2-1_all.deb Size: 3430 MD5sum: ce9ab4b0188adede1f9e7b46b78304d3 SHA1: 85afc9bf6c577bbaa37e1df5d491888687a65526 SHA256: a3d107defeb840e1b10caea39366948439d85527ba7dadbe453936301b1068b0 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check running processes on a dd-wrt router Logs in via ssh on a router running dd-wrt and checks with a list of given processes if all of them are running. Package: monitoring-plugins-dns-pl Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Filename: all/monitoring-plugins-dns-pl_0-0_all.deb Size: 9398 MD5sum: 8460052e5bb748165d28e5ecd98e22f6 SHA1: 77a4462b3ef1f9c07c91d34b61433a8b9771c364 SHA256: 53bceca6ffb14d8730622716176ba27beea0152443b9d03c12f478f4a98fc54f Section: libs Priority: optional Description: Uses perl to query a DNS server and checks the response. See https://github.com/thorfi/nagios-bind9-plugin. Package: monitoring-plugins-esphome-sensor Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 55 Depends: python3 (>= 3.8), python3-requests Recommends: python3-aioesphomeapi Suggests: bash-completion Filename: all/monitoring-plugins-esphome-sensor_0.3.1-1_all.deb Size: 15554 MD5sum: 32e9f3af881fa72e12dea487f5c53884 SHA1: f2c3a8ff46b4b576c73ee886d789a7e937eb99a3 SHA256: c9941924ef95091f4296bc0c66dc9ff1eea8ab8acbad52bc6f3c3ae0e806fff6 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_esphome_sensor Description: Checks ESPHome devices via the native API or web_server v3 Checks ESPHome devices via either the web_server (version 3) HTTP JSON API (with optional HTTP basic auth) or the native API component (with optional plaintext password or Noise PSK encryption key). Supports checking a numeric sensor/text_sensor value against thresholds (-c may be smaller than -w), the time offset of a sensor against the local clock or an NTP server, and a boolean expression over multiple binary_sensor entities. --mode api additionally requires the python3 module aioesphomeapi to be installed separately. Package: monitoring-plugins-exim-queue Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: exim4-daemon-light | exim4-daemon-heavy Recommends: sudo Suggests: bash-completion Filename: all/monitoring-plugins-exim-queue_0.1-1_all.deb Size: 5512 MD5sum: 08c2f0087e7cae5e1ae91732ff9e1d53 SHA1: ff1765a73aab11c9ccb3b032fee85dfcfa13be68 SHA256: ba6e7506cdd0399704fc33755635e09aeebbb6e42aab87d797dd790a57ed59f9 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_exim_queue Description: Nagios/Icinga plugin to check the exim mail queue Checks the exim mail queue: the number of messages, and optionally frozen messages and the age of the oldest message, with thresholds for each and all values in the performance data. As only exim admin users may list the queue, it can run exim with sudo. Package: monitoring-plugins-file-age2 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Filename: all/monitoring-plugins-file-age2_0-0_all.deb Size: 3726 MD5sum: 40877e1e670a0c580ef5520236e63d0d SHA1: 9c6b96529e0b17bb944c7d1ff17431e21c63f631 SHA256: 5f66686d358bd9e4b69880f96ac22f6887b1ec679ea86b57d338666d762cf738 Section: libs Priority: optional Description: Check file age and size but has a mode to not report error on missing files. Thus file-age2 is suitable for lock files. Package: monitoring-plugins-file-exists Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Filename: all/monitoring-plugins-file-exists_0-0_all.deb Size: 2796 MD5sum: 5ec238de637780447ec3a70d051a55dc SHA1: 107c7429fa23ea443d23c67b08d5b20140bf4df6 SHA256: 93db2234d9dcbf730d89d384edf28d9e1662de1f502fc671a32b4547870b7013 Section: libs Priority: optional Description: Uses test command to check if a file exists. Can also be used for device files /dev/*. Package: monitoring-plugins-fileage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3 Filename: all/monitoring-plugins-fileage_0-0_all.deb Size: 3870 MD5sum: f06805add41b25191c50abb753d6e843 SHA1: 0ce4471212b90d0db8f78c8c3b4fe24edabd45b8 SHA256: fa022a3fa0f9bf8d9fa4098980542fda2a61a05edbfc9e392f4bcbce6fae7790 Section: libs Priority: optional Description: Checks if a file is younger than a certain age. Useful for checking arbitrary daemons that write to files periodically. Package: monitoring-plugins-flexlm-server Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 35 Depends: python3 (>= 3.7) Recommends: openssh-client Suggests: bash-completion Breaks: monitoring-plugins-flexlm (<< 1) Replaces: monitoring-plugins-flexlm (<< 1) Filename: all/monitoring-plugins-flexlm-server_0.3-1_all.deb Size: 10280 MD5sum: 1eae1fce1594d1378d5bcbff2b812dd2 SHA1: b7b48f1aa32a44bdb93df1d45ec65e06885c4312 SHA256: 1fc6f03a144f24d07f4c39f421f17c45acf3e206ff3bd744a49a3b18c4ae91c2 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_flexlm_server Description: Nagios/Icinga plugin to check FlexLM license servers Nagios/Icinga plugin that checks a FlexLM (FlexNet Publisher) license server with lmutil, written in Python 3 with the standard library only. . It checks that the license server and all vendor daemons are up, reports the usage of every feature as performance data, and alerts on the days until the earliest expiry of any feature. lmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-folder Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: libmonitoring-plugin-perl Filename: all/monitoring-plugins-folder_0-0_all.deb Size: 4726 MD5sum: d823157b84da79b5258c2a38e02e417b SHA1: f3f61167180244bd4f89238877ccc0883af944c2 SHA256: 97c09714c766fac34ef965e858d0ae7e05c57ea539034588a29443360a0fdebb Section: libs Priority: optional Description: Checks files in a given folder for count, total size and age, using thresholds in monitoring-plugins format. Package: monitoring-plugins-ftp Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-ftp_0-0_all.deb Size: 3460 MD5sum: 55bc5d2c766f4fd19b834e1bf66030a4 SHA1: 333f29dfc11625bdf5cf3b560328360efca01184 SHA256: 7e24a1a19db2ddd5e21434e5a4e1dce305840eebe6451fb94675c77a9c54f500 Section: libs Priority: optional Description: Checks if an ftp server is up and running by logging in. Package: monitoring-plugins-gitlab Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 38 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-gitlab_0.3-1_all.deb Size: 11932 MD5sum: 4b157c609124d65697c7894927123dcd SHA1: f2d5e83bd9b997e87fd8c34aaf8521eb5d4f144b SHA256: cfb737682211186ceb3aa0b6b7a89bcc3852ec7f5e4c925fbe042769fb19c1ec Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_gitlab Description: Nagios/Icinga plugin to check a GitLab instance Nagios/Icinga plugin for GitLab, written in Python 3 with the standard library only. It queries the GitLab REST API, so the monitoring host needs nothing but network access and an access token. . Modes: * health: does the API answer, which version runs, and how fast * token: how many days the monitoring token itself is still valid * stats: users, projects, groups, issues and merge requests * sidekiq: background job processing and backlog * migrations: failed or unfinished batched background migrations * rotate: renews the access token before it expires, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-hassio Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3, python3-requests Filename: all/monitoring-plugins-hassio_0-0_all.deb Size: 4110 MD5sum: f854f5a0bd606c6de9235199ee30d037 SHA1: 193683ec18155ff558f794e44818304e2a9c6ce8 SHA256: 14b75dd669aec56b006ff6e4a80778f3247376fe443e1e0ab7c06c357ed1fbdf Section: libs Priority: optional Description: Queries sensors of a Home Assistant instance via its REST API and compares their states against expected string, timestamp or numeric values. Package: monitoring-plugins-homeassistant-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 47 Depends: python3 (>= 3.8) Suggests: bash-completion Filename: all/monitoring-plugins-homeassistant-sensor_0.2.1-1_all.deb Size: 13436 MD5sum: 4920bbe32716c3a608c95487dae3d643 SHA1: d846e9928ccb59a9050f69545c5cf0ad001787ae SHA256: 90616878d00ee65ee4d6e210267332c7c1de53d5468a2022b8e0de7554e8f6a3 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_homeassistant_sensor Description: Checks Home Assistant entities via its REST API Checks Home Assistant entities via its REST API, with a long-lived access token. Supports checking a numeric state or attribute against thresholds (-c may be smaller than -w), that one entity stays above or below another by a margin (e.g. a wall temperature above the dew point), how long ago an entity last reported, the time offset of a timestamp entity, a boolean expression over on/off entities, and a regular expression against a state. Unavailable entities are CRITICAL by default. Package: monitoring-plugins-immich Version: 0.4.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 35 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-immich_0.4.1-1_all.deb Size: 10414 MD5sum: ac6c768e4e47cce25d526e3dadaea25b SHA1: 375c8d634ca47416208829bc99b9fc9a0f536491 SHA256: b3c688282e81fc7d58f569c4ef6515b4903170666d5c3fb8d10d698c1ab38f90 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_immich Description: Nagios/Icinga plugin to check an Immich instance Nagios/Icinga plugin for Immich, written in Python 3 with the standard library only. It queries the Immich REST API, so the monitoring host needs nothing but network access and an API token. . Modes: * health: does the server answer its ping endpoint, and how fast * storage: how much of the storage is used * stats: how many photos and videos are stored, and how much space they use * rotate: gives the API key a new secret, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-influxdb-data-age Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 36 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-influxdb-data-age_0.2.1-1_all.deb Size: 10328 MD5sum: d6b20e019b9daa4c6ed31b86b11514a7 SHA1: bd9356b2f14fcf909a57ff62cd381816707940c7 SHA256: 2044a6b828845516a8b4b9db863bb90b21984a6d0673666aa477ff6aa46116f8 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_influxdb_data_age Description: Nagios/Icinga plugin to check the age of the newest data in InfluxDB Nagios/Icinga plugin that checks how old the newest data is that an InfluxDB 2 Flux query returns, to catch measurements that stopped arriving. Written in Python 3 with the standard library only. The plugin was check_influxdb_data_age.py in the monitoring-plugins collection; that name is kept as a link. Package: monitoring-plugins-ipmi-power Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: freeipmi, ipmitool Filename: all/monitoring-plugins-ipmi-power_0-0_all.deb Size: 3340 MD5sum: 964db705676556c92a88812a50657770 SHA1: 10ed3ce14b49565337071d4aeb7298edab8eb67f SHA256: 71cc3e83bfeeb2c8f32a24b58a4e6299a490fd41cc20349cd0d46cc1b091865a Section: libs Priority: optional Description: Uses ipmitool from freeipmi to check is a system is powered. Useful as master for service dependencies. Package: monitoring-plugins-ipmi-sensor3 Version: 3.14-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 70 Depends: perl:any, freeipmi-tools (>= 0.5.1), libipc-run-perl Conflicts: monitoring-plugins-ipmi-sensor1, monitoring-plugins-ipmi-sensor2 Filename: all/monitoring-plugins-ipmi-sensor3_3.14-2_all.deb Size: 28044 MD5sum: b428844b63df6bc69f88734363b63b25 SHA1: 672fc5723b7dc6bf60397712cc95cb78dea16bdb SHA256: b4d7ac25f3d69af1aa4c47d6bffcd736bd53d3e920eded6716609eb1e35d4e4b Section: net Priority: optional Homepage: https://github.com/thomas-krenn/check_ipmi_sensor_v3 Description: Nagios/Icinga plugin to check IPMI sensors using FreeIPMI This plugin uses FreeIPMI tools to check IPMI sensors. Sensors can be checked all at once, in groups, or individually. Performance data is provided. Package: monitoring-plugins-isg-wpm-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 62 Depends: python3 (>= 3.8) Suggests: bash-completion Filename: all/monitoring-plugins-isg-wpm-sensor_0.2.1-1_all.deb Size: 17650 MD5sum: bcf8192e260176c373e9dd9ee1366c89 SHA1: 181ee0e119b6d754b97d87165b250ff93b6efe0b SHA256: 6dfc25e3971c51fe64e8239938b98c476707b2c598df9d3f9a00b3230bfda85a Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_isg_wpm_sensor Description: Checks Stiebel Eltron heat pumps with WPM via Modbus TCP of the ISG Checks a Stiebel Eltron heat pump with a heat pump manager WPM (WPMsystem, WPM 3, WPM 3i) via the Modbus TCP interface of the Internet Service Gateway (ISG web with the Modbus TCP/IP software extension). Supports checking a numeric value against thresholds (-c may be smaller than -w), that one value stays above or below another by a margin, a boolean expression over pumps and status bits, a regular expression against a coded value such as the operating mode, and faults and bus errors. The plugin only reads registers. Package: monitoring-plugins-jitsi Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: python3-requests Filename: all/monitoring-plugins-jitsi_0-0_all.deb Size: 4950 MD5sum: 15473b5504c866247b647fdf97f9cc91 SHA1: 3a2cb0a2e24fc977f210727bf9bac2a20d83f1a3 SHA256: d9dee16bd220ba6278f427279b44f095b97c2275c899342eee098804e9ce5057 Section: libs Priority: optional Description: Uses jitsi's JVB API to optain statistics from jitsi services. Package: monitoring-plugins-linux-raid Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Conflicts: nagios-plugins-linuxraid Replaces: nagios-plugins-linuxraid Filename: all/monitoring-plugins-linux-raid_0-0_all.deb Size: 3760 MD5sum: fc0f47568129b3a736dc69934c99c31d SHA1: 0be365725ec8e544f9ba9565949e5f8fcca616c1 SHA256: a6eb652fa5f4f0459e3e3131aae48a2d323b16bd6af8674f933c5d3b55d2c684 Section: libs Priority: optional Description: This plugin checks the status of a local Linux software RAID via the /proc/mdstat interface. Package: monitoring-plugins-mailq Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: perl, monitoring-plugins-common Filename: all/monitoring-plugins-mailq_0-0_all.deb Size: 7852 MD5sum: 31a9d20bbf67ad0633ba294e50786f4e SHA1: 377621c8d1475002d73589d484f108329d8a5bb5 SHA256: f5c215ae4dca1f58fd8a630bda53ad092c186cc90a8c8ee5522c11dea19fdefe Section: libs Priority: optional Description: Checks the mail queue length via mailq/qmail-qstat, autodetecting or selecting sendmail, postfix, qmail, exim or nullmailer. Package: monitoring-plugins-mem Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: procps, gawk Filename: all/monitoring-plugins-mem_0-0_all.deb Size: 3250 MD5sum: e9d17dac16520437f96ac3426ce763fe SHA1: d19690d152c184d167bd3f9ee8a43bcc4ff2d981 SHA256: e7f042624dfea30c68a3c3f7ca5564def9bd5731e3f828dfb1f33a490b9f8a4c Section: libs Priority: optional Description: Uses command free to get free (buffered or unused) memory. Package: monitoring-plugins-mqtt-topic-age Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 89 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, python3-paho-mqtt, python3:any Suggests: bash-completion Filename: all/monitoring-plugins-mqtt-topic-age_0.2.1-1_all.deb Size: 20474 MD5sum: 3667e448d4456eebe8ea8310d100899d SHA1: e510b386d2a1559074ba64f6450eaf3898e51544 SHA256: 06966f44e514080d741852459ac0845346be26da5cfa2e7d92f6c428fa7b7570 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_mqtt_topic_age Description: Nagios/Icinga plugin to check when messages last arrived on MQTT topics Checks when messages last arrived on MQTT topics, or how many arrived recently. mqtt_message_timestamp_logger, a daemon that runs as a systemd service, subscribes to the topics and records the arrival times in an SQLite database, which check_mqtt_topic_age reads; so the check needs no connection to the broker and cannot miss a message published between two checks. . Topic filters may use the MQTT wildcards, and every topic is checked on its own, so one live sensor cannot hide a dead one. Package: monitoring-plugins-nextcloud Version: 0.4.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-nextcloud_0.4.1-1_all.deb Size: 12192 MD5sum: 8e7fc2fd925abcc6ab5c61ee2b89e8f1 SHA1: e47a8dcc50d60003336327df6d5f7bfbace72703 SHA256: 7253e2cee01a820742f1f87d991ea4714f4ec11d3e0b365afb685781b729b78a Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_nextcloud Description: Nagios/Icinga plugin to check a Nextcloud instance Nagios/Icinga plugin for Nextcloud, written in Python 3 with the standard library only. The health mode reads the unauthenticated status.php, every other mode reads the REST API of the serverinfo app. . Modes: * health: is the instance installed, out of maintenance mode and answering * cpu: the load average of the server * memory: the RAM and swap usage of the server * freespace: the free space of the data directory * storage: files, users, storages and database size * users: the number of recently active users * apps: the number of apps with an available update * rotate: replaces the app password, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-nfs-health Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: gawk, bc Filename: all/monitoring-plugins-nfs-health_0-0_all.deb Size: 5710 MD5sum: 8dd7801e8cb48a34a2a101c412566e74 SHA1: e7978d2f5c229f81ba75d6c72c21a3da1af37205 SHA256: 4c182bf9a7dc6081bd106ab4920e9784960f11220319fc7b7c86b192786c6990 Section: libs Priority: optional Description: Checks status and health of a nfs server. Package: monitoring-plugins-ntrip-caster Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 50 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-ntrip-caster_0.3.1-1_all.deb Size: 15278 MD5sum: 3b031115d648f4e8d0f1cee36caa7377 SHA1: eb573ea729b9b6afce9e4db1ab2f6d2047d14841 SHA256: 887c7217114c6bc4f6c4a88bd68107817c29a4f083fd53247dc1f33502e09ddb Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_ntrip_caster Description: Nagios/Icinga plugin to check NTRIP casters Nagios/Icinga plugin that checks whether an NTRIP caster serves current GNSS correction data, written in Python 3 with the standard library only. . Modes: * sourcetable: complete sourcetable, caster clock and a listed mountpoint * stream: valid RTCM3 data and the age of the newest observation epoch . The stream mode decodes the observation epochs of GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS and NavIC messages and compares them with the local clock. It also reports the satellites per constellation and the mean C/N0, and can alert on them, on the station position from 1005/1006 and on message types that must arrive. Package: monitoring-plugins-ntrip-clients Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: bash, gawk | mawk, iproute2, sudo Filename: all/monitoring-plugins-ntrip-clients_0.1-1_all.deb Size: 6808 MD5sum: dcd3b3e2e42674a7b982819adee85533 SHA1: d394f0326086820e6ada0ccb435324565c6a7c65 SHA256: 78747c9ed20828322e7a6480d41b619732dd29e9ad3556e48ba7edce88b80258 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_ntrip_clients Description: Nagios/Icinga plugin to check the clients of a local NTRIP caster Checks how many clients are connected to a local NTRIP caster, e.g. RTKLIB str2str with an ntripc:// output as used by RTKBase. str2str accepts at most 32 clients and never times out clients that send no valid request, so scanners can take all slots while the service keeps running. . It reports the accepted clients, the stale clients and the connections waiting in the listen queue. The plugin needs root or the caster's user; a sudoers snippet for the user nagios is included. Package: monitoring-plugins-nvidia-smi Version: 0.1.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 47 Depends: python3 Suggests: bash-completion Filename: all/monitoring-plugins-nvidia-smi_0.1.1-1_all.deb Size: 12888 MD5sum: 3e70a41113f723fa9d8af69d62c6bd2d SHA1: e6f758989d97da0ec0197cabfbeed2e87e592647 SHA256: 32ea468b889da20a0677e0923c27d297fc31cc2370a6dbb4c7cd4b1505ba5202 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_nvidia_smi Description: Nagios/Icinga plugin to check NVIDIA GPUs via nvidia-smi Nagios/Icinga plugin that checks NVIDIA GPUs with nvidia-smi: temperature, power, clocks and the reasons they are lowered, memory, load, fan, PCIe link and ECC, with all values in the performance data. Python 3 with the standard library only. . It supersedes check_nvidia_smi_temperature (monitoring-plugins-nvidia-smi-temperature); both can be installed. . Requires the proprietary NVIDIA driver (providing nvidia-smi) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-nvidia-smi-temperature Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 20 Suggests: bash-completion Filename: all/monitoring-plugins-nvidia-smi-temperature_0.2-1_all.deb Size: 4112 MD5sum: 8c94bb762af49ccd8c0afdfe87223015 SHA1: 0a9170dd64b600764b31dc87cbbb45fef3651b9a SHA256: 0ee5b0580a03d31f6755dae9f02359d5310d04d0a6f432c7c6a4283e86bacba0 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_nvidia_smi_temperature Description: Checks NVIDIA GPU temperatures via nvidia-smi Uses nvidia-smi to check the temperature of one or more NVIDIA GPUs. Requires the proprietary NVIDIA driver (providing nvidia-smi) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-openvpn Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: python3 Filename: all/monitoring-plugins-openvpn_0-0_all.deb Size: 5254 MD5sum: 27f041258e15796795f3cdec0c58318d SHA1: 357faf6bc709242e54f94bed92c227f2bdf7b08f SHA256: 49dbf3d75584c3a72de1a82480e481087dd00bced921201bd4e8abd0602f7475 Section: libs Priority: optional Description: Check if an OpenVPN server runs on a given UDP or TCP port. Package: monitoring-plugins-openwrt Version: 0.5.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 66 Depends: python3 (>= 3.7), openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-openwrt_0.5.2-1_all.deb Size: 19752 MD5sum: e57a6edcb36ba0018fd2900635af728c SHA1: 3bed6961ed4c4df9dbdc8278369e4a859faff082 SHA256: 5964d155bf6c13838ca3e9d7202eebb2c5f0d3b77a7c49d7ca90a2b7fae4baea Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_openwrt Description: Agentless Nagios/Icinga plugin for OpenWrt devices via SSH Agentless Nagios/Icinga plugin for OpenWrt devices. All checks run over SSH with tools of a default OpenWrt image (BusyBox, ubus, uci, opkg/apk, and wg for WireGuard), so nothing has to be installed on the device. . Checks: memory, disk, load, uptime, conntrack table, netifd interfaces, wifi radios and clients, WireGuard handshake age, procd services, upgradable packages, banIP block lists, temperatures, and the internet access of the device (DNS, ping, HTTP(S)). Thresholds use the standard range format, and all checks print performance data. Package: monitoring-plugins-part-db Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 63 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-part-db_0.3-1_all.deb Size: 19624 MD5sum: e82c0f8aa7227ab13c69d42daf593bc3 SHA1: 804b2cfbbbd13775c1634cdb17e05519cf5157bc SHA256: f0183b85889a6e6375bbd6b17ec0072cedb2176f627a15013450898edeb56591 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_part-db Description: Nagios/Icinga plugin to check a Part-DB instance Nagios/Icinga plugin for Part-DB (https://github.com/Part-DB/Part-DB-server), usable with Nagios, Naemon, Icinga and anything else speaking the monitoring plugins API. It queries the Part-DB REST API and, for the frontend check, its web UI, so the monitoring host needs only network access and an API token. . Modes of check_part-db: * health: API reachability, token validity, database answer * web: web frontend response and TLS certificate expiry * stats: counts of parts, categories, footprints, suppliers * stock: parts below their configured minimum amount * token: days until the API token expires, CRITICAL below 30 . Only the Python 3 standard library is used. Package: monitoring-plugins-podman Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 31 Depends: python3 (>= 3.7), sudo Recommends: podman Suggests: bash-completion Filename: all/monitoring-plugins-podman_0.2-1_all.deb Size: 9244 MD5sum: 4b8d639064712e90d57164a658219e6c SHA1: 6c263d3c88b19b9d70812a2d227b34109a67efcc SHA256: 7fb10fd034c5e80aeb663e695492149bc4381cacada83f765b4f30fc63852177 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_podman Description: Nagios/Icinga plugin to check the containers of a rootless podman user Nagios/Icinga plugin that checks the containers of a rootless podman user via sudo, written in Python 3 with the standard library only. . It checks that every container is running, reports CPU, memory, network and block I/O usage of each as performance data, and alerts when a container gets close to its memory limit. It needs a NOPASSWD sudoers rule for "podman ps" and "podman stats" as the rootless user, and lingering for that user; see the README. Package: monitoring-plugins-postfix-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: postfix Filename: all/monitoring-plugins-postfix-queue_0-0_all.deb Size: 3328 MD5sum: 4b452fc6799cc008e9a5d332e6be677f SHA1: 1d2e52569fe8428eb6546b0adc0b2ebe87036be5 SHA256: 704d80d6d6f03fab2d969be163c4f20e88e55b74361f282404a574229778a91d Section: libs Priority: optional Description: Uses mailq to check the length of the queue of postfix. Package: monitoring-plugins-postfix-relay Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 29 Depends: postfix, python3 (>= 3.7) Recommends: sudo Suggests: bash-completion Filename: all/monitoring-plugins-postfix-relay_0.2-1_all.deb Size: 8858 MD5sum: 0654e30df6faa6039d4eeee710c52e16 SHA1: 5a8b06238b9362cf9ef18c107ad32bc409200d89 SHA256: aae73f103077aed512f90cc108a1834e7bbb4ddd831b3a6933b7c0ef9ebedb84 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_postfix_relay Description: Nagios/Icinga plugin to check that Postfix can log in to its relays Nagios/Icinga plugin that checks that Postfix can log in to the relays it sends through, written in Python 3 with the standard library only. . It tests the relayhost and every relay in sender_dependent_relayhost_maps: connection, STARTTLS and SASL login with the credentials Postfix itself would use (also by sender, smtp_sender_dependent_authentication), and optionally MAIL FROM/RCPT TO without sending. Relays and logins come from the Postfix configuration, so no password is needed in the monitoring configuration. It needs root for the SASL password map, e.g. through a NOPASSWD sudoers rule; see the README. Package: monitoring-plugins-printer-php Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 47 Depends: php-cli, php-snmp Suggests: bash-completion Filename: all/monitoring-plugins-printer-php_0.2-1_all.deb Size: 14290 MD5sum: 9b955def6aa5633a6e91bf814c5231ee SHA1: a5beed6f171ab590d5ecc4917a4ae42b2ed9a077 SHA256: 69958f5990e09b6a8418109984f5940184c7cf997d061b16e22d7c2c99272c05 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_printer Description: Nagios/Icinga plugin to check a printer via SNMP Checks a printer via SNMP: toner and ink levels, paper trays, covers, hardware, the alert table and page counters. It uses the standard Printer-MIB and Host Resources MIB, so it works with most network printers, plus private MIBs of Ricoh and Kyocera. . Named check_printer.php (not check_printer) since Debian's monitoring-plugins-contrib package already ships its own, different, check_printer. Package: monitoring-plugins-proxy Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: wget, bc, gawk Filename: all/monitoring-plugins-proxy_0-0_all.deb Size: 4294 MD5sum: 51df3bd2ac863f1965d0d624b7aec85b SHA1: 3681dc2c0ce85ad6be075d185b0c6f74b778bc5f SHA256: a8a43c62112158dd788e283246ec4e4b2d62ed36bded39271b23817459feeab9 Section: libs Priority: optional Description: Uses wget to obtain a file directly and through a proxy. Then it compares if the files are identical. Caution: lot's of websites include the time in their source code. These will be always different. Package: monitoring-plugins-psu-power Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 26 Depends: bash, coreutils, gawk | mawk, grep, ipmitool, sudo Suggests: bash-completion Filename: all/monitoring-plugins-psu-power_0.2-1_all.deb Size: 8994 MD5sum: 3444ac80be6e874dfe39d61266d86ea0 SHA1: ce18b43d117e632a68d81147da23db4e699f872d SHA256: 6ae7605791c4564f9cacdd218ae2182331b4974a675e86fe17b74244d7078327 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_psu_power Description: Nagios/Icinga plugin to check power consumption and PSU health via PMBus Nagios/Icinga plugin that reads the power supplies of a server over the BMC with IPMI Master Write-Read (PMBus): input power of each PSU and their sum, input voltage, temperature and fan speed, with thresholds for the total power and performance data. . ipmitool needs root (/dev/ipmi0), so the plugin calls it through sudo; the README has a sudoers example that allows only the PMBus reads. The probe script in the documentation finds the PSU addresses on the I2C bus. Package: monitoring-plugins-raspberry-voltage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-raspberry-voltage_0-0_all.deb Size: 3630 MD5sum: eba384b181c939685d251b35cdae72f3 SHA1: 376915f14db8bf81fa3f4a548d249f1ff3e69ee9 SHA256: ce2c1acbf66f9dbeecf75a0dcfde4dcb3d8dc1d7c9d865164b55fddb84d74599 Section: libs Priority: optional Description: Uses vcgencmd to report the core, sdram_c, sdram_i and sdram_p voltage rails as performance data, and checks vcgencmd get_throttled for under-voltage of the power supply. Requires vcgencmd (provided by Raspberry Pi OS's userland tools) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-remote-load Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 20 Depends: bc, openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-remote-load_0.2-1_all.deb Size: 4010 MD5sum: 2211113c512a74faff3aebd416f67cc1 SHA1: 05ae86bf9647be5dbc6496c4c39aacf593f576dc SHA256: 0a05bef55c030712d1086994bb07049576c46fcffa3ee26aa27e9b761449882c Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_remote_load Description: Check /proc/loadavg via ssh Connects via ssh to a remote machine, reads /proc/loadavg, and checks the 1 m, 5 m and 15 m averages. Package: monitoring-plugins-reprise-server Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 33 Depends: python3 (>= 3.7) Recommends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-reprise-server_0.2-1_all.deb Size: 9626 MD5sum: fa4141f8908609bf63bc94f2966eddde SHA1: 7fefbd1dab1c4e18a150aa4dd46b1306bc1d08a8 SHA256: 8d47c6d60e7c925a6368be324e7f55e2b445ba5af0f0fd5094ae0ea584a8b2be Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_reprise_server Description: Nagios/Icinga plugin to check Reprise License Manager servers Nagios/Icinga plugin that checks a Reprise License Manager (RLM) server with rlmutil, written in Python 3 with the standard library only. . It checks that the rlm server and its ISV servers are up, reports the usage of every product as performance data, and alerts on the days until the earliest expiry of any product. rlmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-sensor Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 29 Depends: jq, lm-sensors Suggests: bash-completion Filename: all/monitoring-plugins-sensor_0.1-1_all.deb Size: 7286 MD5sum: 2b374bf5c075d38389f251fae8327269 SHA1: e29347dce0b8b3209eb0a41cdce881d00e19d008 SHA256: 46c4bb3921451295493678b522d2ba4d17d1773ef44365432e5d476ea9a0fb32 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_sensor Description: Nagios/Icinga plugin to check hardware sensors read by lm-sensors Checks a hardware sensor read by lm-sensors, such as a temperature, fan speed or voltage, against the limits and alarms of the chip or against given levels, with the value in the performance data. It reads the JSON of both newer (sensors -J) and older (sensors -j) lm-sensors, and lists the sensors with -l. Package: monitoring-plugins-smb Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: smbclient, monitoring-plugins-common Filename: all/monitoring-plugins-smb_0-0_all.deb Size: 3044 MD5sum: c7bca26502cc8ca4b0fbfda5680476ea SHA1: 1fcb22f369a53ff026c10ae8949c1e7fdd92c935 SHA256: b2c21cfa80f59dc8e2bde4565d7eabd332de95096ca10ad43e249abdd41fb552 Section: libs Priority: optional Description: Uses smbclient to connect anonymously to a samba server. Package: monitoring-plugins-snmp-printer-supply Source: monitoring-plugins-snmp-printer Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: snmp Suggests: bash-completion Filename: all/monitoring-plugins-snmp-printer-supply_0.3-1_all.deb Size: 5286 MD5sum: c47821dc9ee78362400378786e6e178d SHA1: a3004939cca7327f310f9c845217d08f80d23c82 SHA256: 3d06270511b7b5b8ff110309419dfb78219f5660e44f9c91c71cf24786af099a Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_snmp_printer Description: Checks the supplies and trays of a printer via SNMP Uses snmpwalk to connect to a printer and check its supplies and the paper level of its trays. Package: monitoring-plugins-ssh-date Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: python3, openssh-client Filename: all/monitoring-plugins-ssh-date_0-0_all.deb Size: 3276 MD5sum: a2099e68fce0c9f9a8b3d0639157b991 SHA1: c5a69da3222fe24a52e158da6d9d5286efdf5adb SHA256: 72dadcc118951f14d753e07fc73bf05463b527cae3498f0e3b6ffa689a9deb05 Section: libs Priority: optional Description: Uses ssh to run "date -R" on a remote host and compares the result to the local date and time to detect clock drift. Package: monitoring-plugins-ssl-cert Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 292 Depends: openssl Filename: all/monitoring-plugins-ssl-cert_0-0_all.deb Size: 49582 MD5sum: cc426e7f562dddcd43239a5802e1a6de SHA1: d1211a493084238ece20924d3acfccf6a9a6f1c2 SHA256: de4049424d13677c14422ee1e42bed57dd0576b3b3739e20a566a4de7dab131d Section: libs Priority: optional Description: Uses openssl to check validity, expiration and other properties of X.509 certificates. See https://github.com/matteocorti/check_ssl_cert. Package: monitoring-plugins-storcli Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: bash, coreutils, grep, jq, sudo Suggests: bash-completion Filename: all/monitoring-plugins-storcli_0.2-1_all.deb Size: 9018 MD5sum: b31e4026a14270ea963e81af648176cf SHA1: 1512502777ddc62654bcf14c3f672dab5e8638b4 SHA256: 0163964a166b1cbfb121eb270e279daa5bec53afacf5b245a35b2de0d81a7f0d Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_storcli Description: Nagios/Icinga plugin to check MegaRAID controllers via storcli Nagios/Icinga plugin that checks Broadcom/LSI MegaRAID controllers with storcli64: controller, virtual drive and physical drive states, media and other errors, predictive failures, and the temperatures of the drives and the controller (ROC), with performance data. . storcli64 itself is not included; install it from Broadcom. storcli needs root, so the plugin calls it through sudo; the README has a sudoers example that allows only the two read-only calls. Package: monitoring-plugins-stun-turn Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-stun-turn_0.2.1-1_all.deb Size: 11414 MD5sum: 57245e3afe80797428797c716704c908 SHA1: 95116b20598678c9c4e395e86528568b35c2769c SHA256: aed80f4fe8876fedcbd4038760f97b64f8a640bfa8d9365e0a9a8eed1fa7b50b Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_stun_turn Description: Nagios/Icinga plugin to check STUN/TURN servers Nagios/Icinga plugin for STUN/TURN servers such as coturn, written in Python 3 with the standard library only. . Modes: * stun: binding request, mapped address and response time * turn: authentication challenge, or with credentials (long-term or the shared secret of the TURN REST API) a relay allocation that is released again . Both modes work over UDP, TCP and TLS and check the TLS certificate. Package: monitoring-plugins-systemd Version: 5.0.0-0 Architecture: all Maintainer: Debian Python Team Installed-Size: 83 Depends: python3 (>= 3.9), python3-nagiosplugin, systemd, default-dbus-system-bus | dbus-system-bus Suggests: python3-gi Filename: all/monitoring-plugins-systemd_5.0.0-0_all.deb Size: 18488 MD5sum: d2c413e9af9cb78d1fcc3337d4e8acef SHA1: 12f7ecf9a6b66d7b1249af470b3ee25879a055f3 SHA256: 32092a4b2914d1b819f8fedb22e70a99f32b59c379c0f126de4d7f4bce0e87ae Section: net Priority: optional Homepage: https://github.com/Josef-Friedrich/check_systemd Description: systemd plugin for nagios compatible monitoring systems This systemd check for nagios compatible monitoring systems will report a degraded systemd to your monitoring solution. It can also be used to monitor individual systemd services and timers units. Package: monitoring-plugins-systemd-service Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-systemd-service_0-0_all.deb Size: 3224 MD5sum: c3d6a61dc94e6653d06bb38540edd281 SHA1: 6e594094a939048fd7c3c01167bb7011e46406b9 SHA256: 22d4fd550b3e5f11fe907bde4b2e6586d85aa4907be7f801fe126887fcc0ddb1 Section: libs Priority: optional Description: For a *.service it checks if it is prestent, enabled and alive. Extension for openSUSE: also check is a mountpoint is active. Package: monitoring-plugins-systemd-sh Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: openssh-client, systemd Suggests: bash-completion Filename: all/monitoring-plugins-systemd-sh_0.3-1_all.deb Size: 5686 MD5sum: 4de075628f98a3db2c60c84ca4c43d71 SHA1: 682d2f7a8122f6ffada2173a3384e42f784f58ba SHA256: 71eac7676485dfcf0ae907ba6d62050d4c75beb4580bbe21cd3671cb3fa4ed03 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_systemd.sh Description: Nagios/Icinga plugin to check failed systemd units and the boot time Checks systemd on a local or remote machine via systemctl: the boot time, failed units, and services that have to be running. Package: monitoring-plugins-tasmota-sensor Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 42 Depends: python3 (>= 3.8), python3-requests Suggests: bash-completion Filename: all/monitoring-plugins-tasmota-sensor_0.3.1-1_all.deb Size: 12188 MD5sum: 27a569a5f4fe34f83acffdab4bae8ca4 SHA1: b0ec803bf582dd17e42102a6eb56bd067422a8f9 SHA256: 0d66cbb3b567fcc0aa71f66cb3cfae149ea79a6b253b607759b9824687457d64 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tasmota_sensor Description: Checks Tasmota devices via the HTTP command API Checks Tasmota devices via the HTTP command API (/cm?cmnd=...). Supports checking a numeric sensor value against thresholds (-c may be smaller than -w), the time offset of the device's own reported time against the local clock or an NTP server, a boolean expression over POWER-style relay states, and a regular expression match against a sensor field's value. Package: monitoring-plugins-tftp Version: 0.1.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: tftp-hpa Suggests: bash-completion Filename: all/monitoring-plugins-tftp_0.1.2-1_all.deb Size: 5244 MD5sum: 888ada32ed101818c569910f3be2396c SHA1: 2e6474adc7cfd95c1fcb027934eb2ce2d0b30ceb SHA256: 900f3969f72cbc2aef4ef8e8722030c2453aa71614cae7d93c47f1a2b08b1fdd Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tftp Description: Nagios/Icinga plugin to check that a TFTP server serves a file Checks a TFTP server, e.g. for PXE boot, by downloading a file with the tftp-hpa client. A file that is served is OK, a TFTP error such as "file not found" is a WARNING, and no answer is CRITICAL. The download time and the file size go into the performance data, with thresholds for both. Package: monitoring-plugins-thermal-zone0 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-thermal-zone0_0-0_all.deb Size: 3268 MD5sum: 6b1a70ab0cff0ffca4295e995cbd1fe9 SHA1: 08023aca1c9aaf2e3e7ce946927730c44c174aef SHA256: c25b5233da3ee803e975f5f37289701b11a0e87dafcc01820b660d3d39081ea1 Section: libs Priority: optional Description: Reads /sys/class/thermal/thermal_zone0/temp to check the SoC/board temperature, as found on Raspberry Pi and many other ARM boards. Package: monitoring-plugins-tor-proxy Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: curl | wget Suggests: bash-completion Filename: all/monitoring-plugins-tor-proxy_0.3-1_all.deb Size: 6294 MD5sum: 5de0ad6543646467218ca5cbe21c043d SHA1: ed57b6d2c808400b749b1880644c30cc3bd40a92 SHA256: fb20dafaed6a4250308041156f083c70b87572ce934020d2c9f16f17b0ee2fc5 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tor_proxy Description: Nagios/Icinga plugin to check that a proxy exits to the Tor network Nagios/Icinga plugin that checks whether a proxy exits to the Tor network, by asking the check service of the Tor Project through it. Works with SOCKS proxies such as Tor itself and HTTP proxies such as Privoxy in front of Tor, using curl or wget; SOCKS proxies need curl. Package: monitoring-plugins-ts3 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: expect Filename: all/monitoring-plugins-ts3_0-0_all.deb Size: 3260 MD5sum: efe5b24f7a29270706c7cf3669fbc72b SHA1: 7bf363274da6b49c84e711fd7a4114469e8019cb SHA256: bcf4a45d9e7301029cbea804111e926c139de05f7741c00bcf00ae0ce1cec3b7 Section: libs Priority: optional Description: Connects to the dataport of a teamspeak server and checks for its characterstic respone. Package: monitoring-plugins-vdr-diskusage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, gawk Filename: all/monitoring-plugins-vdr-diskusage_0-0_all.deb Size: 3646 MD5sum: a5841e807a0436f37f4b71ad51bf1e73 SHA1: 9aa08234a9c3738a629a21e298f5a23ca5108532 SHA256: 8fd74a1c75f6f42b22fb757e9cd04bdccdd788390453ad40628c0008e7380f72 Section: libs Priority: optional Description: Uses svdrpsend to check disk utilization of VDR. Package: monitoring-plugins-vdr-signalstrength Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, vdr-plugin-femon Filename: all/monitoring-plugins-vdr-signalstrength_0-0_all.deb Size: 3872 MD5sum: 68bec85b2007f3a02a0d613d46f0a327 SHA1: 3e6e49e4fd86d2f1962b49f57dc5f1bf4d6d6c0b SHA256: e982953a8cbf0f09fcaacb3081c8351bad416938b33e6d00c15cb1f644b062e1 Section: libs Priority: optional Description: Uses svdrpsend to connect to a VDR using the femon plugin. Package: monitoring-plugins-zyxel-hw-monitor Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 68 Depends: snmp, gawk | mawk Recommends: python3 Suggests: bash-completion Filename: all/monitoring-plugins-zyxel-hw-monitor_0.2-1_all.deb Size: 9170 MD5sum: 0e9412336f0b167cb0e43734516cc1fd SHA1: 432de0b47b9c76d5dc655b8c758dc52a27f1e8b2 SHA256: a5693e2dcafb1fb9545a8ec5ad14e7026f25ad3be8fc2f150bc932d6dda8f28a Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_zyxel_hw_monitor Description: Nagios/Icinga plugins to check Zyxel devices via SNMP Plugins for monitoring Zyxel devices via SNMP, based on the ZYXEL-HW-MONITOR-MIB and ZYXEL-ES-COMMON MIBs. They are compatible with Nagios, Icinga and other monitoring systems supporting Nagios plugins. . Included checks: * check_zyxel-cpu: CPU usage (%) * check_zyxel-mem: memory usage (%) * check_zyxel-flash: flash usage (%) * check_zyxel-fan: fan RPM (indexed sensor) * check_zyxel-temperature: temperature (indexed sensor) * check_zyxel-voltage: voltage (indexed sensor) * check_zyxel-power: power source status (indexed source) * check_zyxel-time: switch time skew against an NTP server or local time . All plugins use numeric OIDs, so no MIB files are needed on the monitoring host. SNMPv2c and SNMPv3 are supported. Package: mqtt2logger Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 64 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, python3 (>= 3.7), python3-paho-mqtt, python3-yaml Suggests: bash-completion Filename: all/mqtt2logger_0.2.1-1_all.deb Size: 15816 MD5sum: 9579849afae0b61f00cf320087301678 SHA1: 9fe18739a300222f4dccc778e98ba66ec5bbfb48 SHA256: 6ab5c9a0a90a8016aaa424b5f0080ba5e0e1fa7d8dc616acbe335bdcbaabfc60 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/mqtt2logger Description: Forward the MQTT logs of ESPHome and Tasmota devices to rsyslog and journald Subscribes to the log topics of ESPHome and Tasmota devices on an MQTT broker and forwards each log line to rsyslog (RFC 5424, with the device as host name) and to systemd-journald, each configurable. Severity and time stamp are taken from the messages where they contain them. A persistent MQTT session lets the broker keep QoS 1 messages while the daemon is down, and queues keep messages while rsyslog or journald are unavailable. The systemd service runs as the user mqtt2logger and is not enabled by default. Package: purge-postfix-mails Version: 0.4-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 24 Depends: jq (>= 1.6), postfix (>= 3.1) Suggests: bash-completion Filename: all/purge-postfix-mails_0.4-1_all.deb Size: 4934 MD5sum: 55cdfd54f1d8f7b6f0d2ac5bf456408d SHA1: 23de33c5ade0eabc00aae8efae7dd09461808e40 SHA256: 96137eefe1edd1a7f106944f90b209dfbcc972f8fba8c9108fbb6096fa7b6f2d Section: mail Priority: optional Homepage: https://github.com/Aikhjarto/purge_postfix_mails Description: Scripts to break a mail loop by purging undeliverable mails from Postfix Scripts that break a mail loop in Postfix, as caused by a machine mailing its admin about every logged error while the relayhost is unreachable, by deleting the queued mails that cannot be delivered: * purge_postfix_mailer_daemon.sh deletes bounces, mails to postmaster@myorigin and queued mails that mention postmaster or MAILER-DAEMON of myorigin * purge_postfix_mails.sh additionally deletes deferred mails the relayhost refused * purge_postfix_per_recipient.sh deletes the mails to given recipients * purge_postfix_per_sender.sh deletes the mails from given senders Package: rapl-mqtt Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: python3 (>= 3.9), mosquitto-clients Filename: all/rapl-mqtt_0.1-1_all.deb Size: 5726 MD5sum: fd7cb2819a13150bdfe4326d2b36fba3 SHA1: 5f2360cc0b1b92381075a3b02be7cbb69935d2fb SHA256: 06807d8c852ea2fe532d88f55d0840500e9acad142c4430069f59defb222c9d4 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/rapl-mqtt Description: Publish the CPU's RAPL power to MQTT Reads the energy counters of the CPU's RAPL (Intel since Sandy Bridge, AMD since Zen) and publishes the average power of each zone (package, cores, DRAM) in watts to an MQTT broker, once a minute. Home Assistant MQTT discovery configs are published too, so the zones show up as power sensors. . Options for the service go into RAPL_MQTT_OPTS in /etc/default/rapl-mqtt, e.g. RAPL_MQTT_OPTS="--broker mqtt.example.lan"; the default broker is localhost. The service is not enabled on installation. Package: rsyslog-maillog Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 33 Depends: rsyslog Filename: all/rsyslog-maillog_0.1-1_all.deb Size: 7102 MD5sum: 099d7f89b24f5485d94f64e299a4b446 SHA1: a53b1af8923bbf144c1c5ba69ef9e2c73b885b13 SHA256: 57d4d702a450c5e545a1c5db33c3144b97c2807fe78fa9fad7e7bc450bc94194 Section: admin Priority: optional Homepage: https://github.com/Aihjarto/rsyslog-maillog Description: This project provides a config for forwarding important log lines in rsyslog via postfix. Package: vdradmin-am Version: 3.6.13-1.1 Architecture: all Maintainer: Debian VDR Team Installed-Size: 1360 Depends: perl:any, libio-compress-perl, libtemplate-perl, liburi-perl, libio-socket-inet6-perl, libsocket6-perl, liblocale-gettext-perl | libintl-perl, libwww-perl, adduser, libtemplate-plugin-javascript-perl, libcgi-pm-perl Suggests: vdr (>= 1.7.15), libauthen-sasl-perl, vdr-plugin-epgsearch (>= 0.9.23) Conflicts: vdradmin Replaces: vdradmin Provides: vdradmin Filename: all/vdradmin-am_3.6.13-1.1_all.deb Size: 290422 MD5sum: 408e4719690d6a7940b0e066a18549b9 SHA1: 05b55a2c434a1251c42012d3f2c32596d32f8e0a SHA256: e7605cd0f8abaa2106652a7a66beeff0a6f1f3da519a76387438ce2e866f1197 Section: video Priority: optional Homepage: http://andreas.vdr-developer.org/vdradmin-am/index.html Description: Web-based administration tool for vdr vdradmin-am provides a webinterface for managing the Linux Video Disk Recorder (vdr) Package: vm-boot-order-2 Version: 0.3.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 42 Depends: python3 (>= 3.7), python3-libvirt Recommends: sysstat Suggests: bash-completion Filename: all/vm-boot-order-2_0.3.2-1_all.deb Size: 11840 MD5sum: b6cbe41006fc8cdb5cff48ee99d82537 SHA1: 0a69dde7acb5b67b0872b07d767caab71a2fc4c5 SHA256: a58dfa22870a9bba5a8403957dae6d60845771e7c1442a09290ea6a195233d39 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/vm-boot-order-2 Description: Start libvirt VMs in order at boot and shut them down in parallel Starts libvirt VMs one after another in a configured order at boot, and shuts them down in parallel at system shutdown. After starting a VM, it waits up to a configured time, or until the I/O load of a configured disk drops, before starting the next one. At shutdown, VMs that do not stop within a timeout are powered off. . The service is installed but not enabled. Configure the VMs in /etc/vm-boot-order-2.conf, check it with "vm-boot-order-2.py status", and disable libvirt autostart for those VMs.