Package: block-badips Version: 0.8.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 56 Depends: bash, ipset, iptables, curl | wget, util-linux, grep, coreutils, sed, gawk | mawk Suggests: bash-completion Filename: all/block-badips_0.8.0-1_all.deb Size: 17046 MD5sum: cf6afde3282326673e348ca77882815a SHA1: e3dc953747afe001e715055f294632ea870d90c8 SHA256: d5253f643568b04466672dfd6364ad38ca08b87b4189bb8fd512843849a24020 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Block IPs of known brute-force attackers Downloads a list of IPv4 and IPv6 addresses and ranges, by default from blocklist.de, loads it into ipsets and drops their traffic with one iptables rule per address family in the PREROUTING chain of the raw table. Invalid, too broad or suddenly much shorter lists are refused. Package: blocklist-updater Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 56 Depends: python3 (>= 3.9) Suggests: bash-completion Filename: all/blocklist-updater_0.2-1_all.deb Size: 13484 MD5sum: 4d6df50c03b6dab3d676af24abbf73b9 SHA1: 796272b1082f85a12ff12b67c26a3f3256e0aeec SHA256: d8616d1d1b0806dedcb8dc27d3383d76c10f75d22c62de0f75d8e97605ddce45 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/blocklist-updater Description: Download, validate and merge IP blocklists Downloads IP blocklists from several providers (Spamhaus DROP, AbuseIPDB, blocklist.de, CINS Army, Emerging Threats, GreenSnow, DShield and others), validates them and merges them into one list, e.g. for block-badips. Broken downloads keep the previous list, private, reserved and own networks are never published, and stale lists age out. . Each provider is a section in /etc/blocklists/blocklists.conf and is switched on by enabling its timer update-blocklist@
.timer. No unit is enabled on installation; the units run as www-data. Package: cron-check-nagios Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: monitoring-plugins-nagios, mailx, cron Filename: all/cron-check-nagios_0-0_all.deb Size: 2942 MD5sum: 76da7943099fd7afebfe2e7ddc431837 SHA1: 6aae4b06cbb24c7585d8394f446f48b8f3ecc08c SHA256: 2f489f37f3b2e8d7232c67f2a99c66f84cb9c65542746b7b9f352c63101095b9 Section: libs Priority: optional Description: Provides a script that can be executed via cron to see if nagios is still up and running. If nagios is down or last log entry longer than a minute ago, a mail is sent to root. Package: iipsrv Version: 1.3-1 Architecture: amd64 Maintainer: Thomas Wagner Installed-Size: 441 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, libavif13 (>= 0.9.3), libc6 (>= 2.34), libfcgi0ldbl (>= 2.4.2), libgcc-s1 (>= 3.3.1), libgomp1 (>= 4.9), libjpeg8 (>= 8c), libmemcached11, libopenjp2-7 (>= 2.0.0), libpng16-16 (>= 1.6.2-1), libstdc++6 (>= 11), libtiff5 (>= 4.0.3), libwebp7, libwebpmux3 Filename: amd64/iipsrv_1.3-1_amd64.deb Size: 177128 MD5sum: 7775574f720712ca572e50b2c054405d SHA1: de2650bc97db6c3f25c117c66e59690665bfce42 SHA256: fd843d49b2f101d98cf0c9e4708388e012d57d982caa45f112b694041733c40e Section: web Priority: optional Homepage: https://iipimage.sourceforge.io Description: IIPImage server for high resolution images iipsrv is a fast FastCGI image server for streaming and dynamically transforming high resolution and scientific images. It speaks the IIP, IIIF, Zoomify and DeepZoom protocols and reads tiled multi-resolution TIFF and JPEG2000 images; output can be JPEG, PNG, WebP, AVIF or TIFF. . It runs behind a web server such as Apache, nginx or lighttpd through FastCGI. The iipsrv.service unit starts it as a standalone FastCGI daemon listening on port 9000; settings go to /etc/default/iipsrv. . This is a newer upstream release than the iipimage-server package of the distribution, installed as /usr/sbin/iipsrv. Package: journald-remote-follower-rsyslog Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 39 Depends: python3 (>= 3.7), python3-systemd, systemd-journal-remote Recommends: rsyslog-relp Filename: all/journald-remote-follower-rsyslog_0.1-1_all.deb Size: 9624 MD5sum: 8ef0c00e02b590018ae37562674a6321 SHA1: 902f09c2066a43beebedfd4d47695886a3fb158e SHA256: e50c5e52b1e7f416a1374d7ed869124847bf4d8c8d3dcf1239a63f6f61c811c5 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/journald-remote-follower-rsyslog Description: Forward systemd-journal-remote journals to rsyslog in arrival order rsyslog's imjournal with Remote="on" merges the local and the remote journals by time and skips entries that are uploaded late. This program reads only the journals that systemd-journal-remote receives, follows them in the order the entries were written and sends every entry to rsyslog's imrelp input. The journal cursor is saved only after rsyslog acknowledged the entries, so delivery is at least once. A backfill mode sends the entries of a time range that are missing from rsyslog's per-host files. . The service is installed but not enabled; rsyslog has to be configured first, see the example in the documentation. Package: kvm-guest-update Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: bash (>= 4), coreutils, jq, libvirt-clients, bsdutils Suggests: bash-completion Filename: all/kvm-guest-update_0.3-1_all.deb Size: 14840 MD5sum: 6530088040c86d4d9e902ce727cefe07 SHA1: 72ec438aca5adc285019f788134d841d9d26c7e4 SHA256: 08503f6825ebb80079373cb1c1509fef559344d5151fab9e10be1802b3c81622 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/kvm-guest-update Description: Update Debian and openSUSE Leap VMs through the QEMU guest agent Updates the running Debian and openSUSE Leap VMs of a KVM host through the QEMU guest agent, so no SSH access or password is needed in the VMs. . Each VM is checked before its upgrade and skipped if the package manager would ask a question (changed conffiles, dependency problems, packages to be removed, licenses). Skipped VMs are logged with priority err for a log monitor. Afterwards every VM is checked for a needed reboot; VMs are never rebooted. The upgrade runs in each VM as a transient systemd unit, so it finishes even when the guest agent is upgraded or the script interrupted. Hooks in the VMs can run commands before and after the upgrade. Package: monitoring-plugins-apcaccess Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: apcupsd, python3 Filename: all/monitoring-plugins-apcaccess_0-0_all.deb Size: 3404 MD5sum: 40c06f37bbc79f5c72413e4da5a08e34 SHA1: f844f2ac8521da90f9ebe3e2b99de39283fe223e SHA256: f5bbd5c4e240c07b359c2e279fa4fbee7607beced95183fe309e603dc904ef20 Section: libs Priority: optional Description: Uses apcaccess to retrieve data from a running apcupsd. Package: monitoring-plugins-bareos-job Version: 1.2-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 271 Depends: python3 (>= 3.7), python3-psycopg2 Filename: all/monitoring-plugins-bareos-job_1.2-2_all.deb Size: 231892 MD5sum: 9cc41b7684e3e42d197e16811d262f4f SHA1: 45069a50fb474bcb7f8c456df11a438465e4917b SHA256: ddc7d2fdf722e1adf59560ed19e26a3517ee1e70b4318223eba95e15fc610b65 Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-job Description: Nagios/Icinga plugin to check a Bareos backup job Checks a specific Bareos backup job via the Bareos PostgreSQL catalog, optionally only its most recent run, and reports files, size, duration and age as performance data. Package: monitoring-plugins-bareos-pool Version: 1.0-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 43 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-pool_1.0-2_all.deb Size: 14640 MD5sum: 6371d6ae9676de0be797ca27d8d09642 SHA1: 9ceb4678a6d1c4b71a1d942cb39c0a290eae5706 SHA256: 2f644a8634fb586e65d51fdc6bb75f684342c2b66e59b79195dd71f104b24f26 Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-pool Description: Nagios/Icinga plugin to check the tapes in Bareos pools Checks the number of tapes in a Bareos pool via the Bareos PostgreSQL catalog, and the number of volumes overdue for recycling back to the scratch pool. check_bareos_pool_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-bareos-tape Version: 1.1-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-tape_1.1-2_all.deb Size: 14958 MD5sum: 957781b574465bf659a41945e9b37fe6 SHA1: fc4da5776bbd804b13cfac0c9505eefa10c1ec8b SHA256: 5e269736b08904f7b47c2ab16c82c137752e1715e85f894a1a105e94af196e14 Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-tape Description: Nagios/Icinga plugin to check the lifecycle of Bareos tapes Checks the lifecycle state of Bareos tape volumes via the Bareos PostgreSQL catalog: recycle count, mount count, write errors, tape age and volume status. check_bareos_tape_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-block-badips Source: block-badips Version: 0.8.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 24 Depends: sudo, bash, grep, ipset, iptables Suggests: bash-completion Filename: all/monitoring-plugins-block-badips_0.8.0-1_all.deb Size: 5358 MD5sum: da495a2cb42af94d2066d83678deb157 SHA1: 905aa16f0d8714e17908239c5fbcbc7f93ead04e SHA256: 2bec136ad1290c344ec0f474501b6e34a2113799fff82fb7d2e2c44c4845b908 Section: libs Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Nagios/Icinga plugin to check the blocklists of block-badips Checks the number of blocked entries, the age of the last update, ipsets that no rule uses and nearly full ipsets. A sudoers snippet for the user nagios is included. Package: monitoring-plugins-btrfs-sysfs Version: 0.4-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 45 Depends: python3 (>= 3.7), util-linux Recommends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-btrfs-sysfs_0.4-1_all.deb Size: 13956 MD5sum: a2eaf70d74d8aea9f6027982386a9cb7 SHA1: 2b72a115bd237256976ace40c19c980abb2051d9 SHA256: c999c811eb6b4fdaa62e96c84bc59dcbedbfd10a38ef16f703f44265b38f6c6c Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/check_btrfs_sysfs Description: Nagios/Icinga plugin to check btrfs space and device errors without root Monitoring plugin for btrfs file systems. It reads /sys/fs/btrfs, which every user can read, so it needs no root, no sudo and no btrfs ioctls. It checks the local machine, or a remote host over SSH, where nothing has to be installed. . It checks the unallocated space, the metadata usage including the global reserve, optionally the data usage, the error counters of each device and the quota (qgroup) limit of the mounted subvolume, and hints at a balance when allocated data chunks are mostly unused. Package: monitoring-plugins-cups-printer Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: cups-client Filename: all/monitoring-plugins-cups-printer_0-0_all.deb Size: 3084 MD5sum: 5f2311b3541c54717d99e5ba811332fd SHA1: 7a4ca2bb345898420442c69d3b6a97c05a5ac4c7 SHA256: ba597dbc5a109c8226746283f58d2897373428051a3d560710ed2dc4f8a9a880 Section: libs Priority: optional Description: Checks if cups provides a certain printer. Package: monitoring-plugins-cups-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: cups-client Filename: all/monitoring-plugins-cups-queue_0-0_all.deb Size: 4288 MD5sum: 131e696ae2ed348529e077841d29cd80 SHA1: 15622352acc4fb646d25def8e0d47e87b3552b6b SHA256: e0c50574ca4a30ba68234d279753d1287e479ee9f11230f7e6399abd9aa9f7bb Section: libs Priority: optional Description: Checks the length of a printer queue in cupsd. Package: monitoring-plugins-dd-wrt-inet-access Source: monitoring-plugins-dd-wrt Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-dd-wrt-inet-access_0.2-1_all.deb Size: 3290 MD5sum: aafb5d160137225788b75df957c450f1 SHA1: 1b54229026f8440c5cfa6d720ebb22d627116094 SHA256: e1dbd4272aaefe9522861731482e980b51140825806ebbd1d30b0f5afa36f44b Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check if a router running dd-wrt has internet connection Logs in via ssh on a router running dd-wrt and tries to access a certain website with w3m to check if internet access is given. Package: monitoring-plugins-dd-wrt-ps Source: monitoring-plugins-dd-wrt Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-dd-wrt-ps_0.2-1_all.deb Size: 3416 MD5sum: 079e0d6a80fd9b79d5a1ab9d06ed781a SHA1: d90258ac4ea67c567595ef59ed0cec0dcb1af92d SHA256: 4ca988ad3b9fd54ec2bddf069331c63f223e58f251fadb4a8e775a1b44c7375b Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check running processes on a dd-wrt router Logs in via ssh on a router running dd-wrt and checks with a list of given processes if all of them are running. Package: monitoring-plugins-dns-pl Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Filename: all/monitoring-plugins-dns-pl_0-0_all.deb Size: 9386 MD5sum: 8f93d8f15e2e436963f672283c45513a SHA1: 6eb4b90476b1e4c308888efdbe0a94bb403def0e SHA256: ab5c60a0e6fd5ddcb2dc6fef00b722188d746de342a53d097ee43386200edb44 Section: libs Priority: optional Description: Uses perl to query a DNS server and checks the response. See https://github.com/thorfi/nagios-bind9-plugin. Package: monitoring-plugins-esphome-sensor Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 55 Depends: python3 (>= 3.8), python3-requests Recommends: python3-aioesphomeapi Suggests: bash-completion Filename: all/monitoring-plugins-esphome-sensor_0.3.1-1_all.deb Size: 15552 MD5sum: ede4214a639d28272f8190870c52ff4a SHA1: 861894a2573b978b6f74bea8320f04b22ab96d95 SHA256: a333972867fe20b2b5d228f19a697c1bee46e674b04a430618ba6a76e92d3b8d Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_esphome_sensor Description: Checks ESPHome devices via the native API or web_server v3 Checks ESPHome devices via either the web_server (version 3) HTTP JSON API (with optional HTTP basic auth) or the native API component (with optional plaintext password or Noise PSK encryption key). Supports checking a numeric sensor/text_sensor value against thresholds (-c may be smaller than -w), the time offset of a sensor against the local clock or an NTP server, and a boolean expression over multiple binary_sensor entities. --mode api additionally requires the python3 module aioesphomeapi to be installed separately. Package: monitoring-plugins-exim-queue Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: exim4-daemon-light | exim4-daemon-heavy Recommends: sudo Suggests: bash-completion Filename: all/monitoring-plugins-exim-queue_0.1-1_all.deb Size: 5498 MD5sum: a44ae4d9cf26f155a814ca46df532191 SHA1: f5f971f8ee8435742337523de31e027f1b99a5f4 SHA256: 10c28ae4959fad51640d9ed251297ca619a04b8af7a992ce19b10fd40edfbc8c Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_exim_queue Description: Nagios/Icinga plugin to check the exim mail queue Checks the exim mail queue: the number of messages, and optionally frozen messages and the age of the oldest message, with thresholds for each and all values in the performance data. As only exim admin users may list the queue, it can run exim with sudo. Package: monitoring-plugins-file-age2 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Filename: all/monitoring-plugins-file-age2_0-0_all.deb Size: 3710 MD5sum: e7b6a3a108f2be166fc9f03e1edf25c9 SHA1: 5ef7101b9824a424d729b938c21d6b166e78ffd0 SHA256: 09179f35fff8e565d81209cb2c35daa559762e2934bf114b7f4a8c1a4ebc5e93 Section: libs Priority: optional Description: Check file age and size but has a mode to not report error on missing files. Thus file-age2 is suitable for lock files. Package: monitoring-plugins-file-exists Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Filename: all/monitoring-plugins-file-exists_0-0_all.deb Size: 2782 MD5sum: a036fe2b9dea92de451a1b464131c0a4 SHA1: 5d2c5e5d6fb4d21b9ef6774909d040d7591e28d0 SHA256: 1541dd1971c8b77512c7ab6177173cadcc4a8e93d34c3be89f1e2c77c83dcfe1 Section: libs Priority: optional Description: Uses test command to check if a file exists. Can also be used for device files /dev/*. Package: monitoring-plugins-fileage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3 Filename: all/monitoring-plugins-fileage_0-0_all.deb Size: 3858 MD5sum: 2f7e3696d7c5d006c535477a23551dd5 SHA1: 44c7670f412f652b58dd95ad31798946f0538937 SHA256: 13394a002b52750793faad4f4e605da8025776e5c317b13a6d663b5bab71a53a Section: libs Priority: optional Description: Checks if a file is younger than a certain age. Useful for checking arbitrary daemons that write to files periodically. Package: monitoring-plugins-flexlm-server Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 35 Depends: python3 (>= 3.7) Recommends: openssh-client Suggests: bash-completion Breaks: monitoring-plugins-flexlm (<< 1) Replaces: monitoring-plugins-flexlm (<< 1) Filename: all/monitoring-plugins-flexlm-server_0.3-1_all.deb Size: 10286 MD5sum: 7451042669b2381bc1f0c788ba16b34a SHA1: ddf96c001f911cd9b033747dc398829cded2823d SHA256: 929606b252baf63307a3a22b48d21c62ed560373b7ce6c0b734a61bd0dd6bc59 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_flexlm_server Description: Nagios/Icinga plugin to check FlexLM license servers Nagios/Icinga plugin that checks a FlexLM (FlexNet Publisher) license server with lmutil, written in Python 3 with the standard library only. . It checks that the license server and all vendor daemons are up, reports the usage of every feature as performance data, and alerts on the days until the earliest expiry of any feature. lmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-folder Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: libmonitoring-plugin-perl Filename: all/monitoring-plugins-folder_0-0_all.deb Size: 4712 MD5sum: e6afd7ed5312019282d29a05814e2f77 SHA1: cef3d6da60dcb29cf0dc4965e87ebc16f4978975 SHA256: 7df0e7abca32fd442317bff9520ae394ce7b9037492d741fc1b4809b8dcd14ad Section: libs Priority: optional Description: Checks files in a given folder for count, total size and age, using thresholds in monitoring-plugins format. Package: monitoring-plugins-ftp Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-ftp_0-0_all.deb Size: 3448 MD5sum: fecd37ada778ad2646cf9de069bfab5f SHA1: 73ef365416ca366109d736c442a6fb1cc0f70380 SHA256: e56a6882ed6f2255deba1dd3e5420f3d7ab1edec88144959bff31273bab699aa Section: libs Priority: optional Description: Checks if an ftp server is up and running by logging in. Package: monitoring-plugins-gitlab Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 38 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-gitlab_0.3-1_all.deb Size: 11928 MD5sum: 5215873f4304ecc39f19b7940a3b28b4 SHA1: 7cf4029ec3bb6994f02e1f06e160e2369f647f01 SHA256: 69ddb9aa22ba8bea4778b0329bec5f2af9afa853e96023904badecb6d5ebfb67 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_gitlab Description: Nagios/Icinga plugin to check a GitLab instance Nagios/Icinga plugin for GitLab, written in Python 3 with the standard library only. It queries the GitLab REST API, so the monitoring host needs nothing but network access and an access token. . Modes: * health: does the API answer, which version runs, and how fast * token: how many days the monitoring token itself is still valid * stats: users, projects, groups, issues and merge requests * sidekiq: background job processing and backlog * migrations: failed or unfinished batched background migrations * rotate: renews the access token before it expires, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-hassio Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3, python3-requests Filename: all/monitoring-plugins-hassio_0-0_all.deb Size: 4094 MD5sum: 796bc1f8ef7301347c40a9e96c10eca2 SHA1: 62405541d6b78e62937b0b98195e4cbe6d4caa2e SHA256: 9356af691179650e30c229eed9170f80a0fc52c91a892da21b8c4de26168c09c Section: libs Priority: optional Description: Queries sensors of a Home Assistant instance via its REST API and compares their states against expected string, timestamp or numeric values. Package: monitoring-plugins-homeassistant-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 47 Depends: python3 (>= 3.8) Suggests: bash-completion Filename: all/monitoring-plugins-homeassistant-sensor_0.2.1-1_all.deb Size: 13428 MD5sum: de1bca0c9d1f5aebfda83f648a78af0e SHA1: 499bc1c6fe7618b9619f2e187b4859a1e587cfa8 SHA256: 67fd73d953131330fd5c6516f9b0fc8d81d4b0ca19d356873252ab9a32a69a08 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_homeassistant_sensor Description: Checks Home Assistant entities via its REST API Checks Home Assistant entities via its REST API, with a long-lived access token. Supports checking a numeric state or attribute against thresholds (-c may be smaller than -w), that one entity stays above or below another by a margin (e.g. a wall temperature above the dew point), how long ago an entity last reported, the time offset of a timestamp entity, a boolean expression over on/off entities, and a regular expression against a state. Unavailable entities are CRITICAL by default. Package: monitoring-plugins-immich Version: 0.4.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 35 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-immich_0.4.1-1_all.deb Size: 10408 MD5sum: dfb6aeabb6987de0214bafbcf45dfbbe SHA1: 28dd25d6d23dc709e6e402348b92be49a07daa21 SHA256: c9a73ca765ab487e6b55953c354866a09f697a4d1d42bcab7e695a338c219898 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_immich Description: Nagios/Icinga plugin to check an Immich instance Nagios/Icinga plugin for Immich, written in Python 3 with the standard library only. It queries the Immich REST API, so the monitoring host needs nothing but network access and an API token. . Modes: * health: does the server answer its ping endpoint, and how fast * storage: how much of the storage is used * stats: how many photos and videos are stored, and how much space they use * rotate: gives the API key a new secret, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-influxdb-data-age Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 36 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-influxdb-data-age_0.2.1-1_all.deb Size: 10318 MD5sum: 49afe54d70ae01d8a20420050444626c SHA1: f2db7d783716f8908cecb47ce4c67416a4d652f1 SHA256: 5bfec4a35cdb039cdef0ed91c41778eefbd7f34f62951bc2e6da7a4231d98d72 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_influxdb_data_age Description: Nagios/Icinga plugin to check the age of the newest data in InfluxDB Nagios/Icinga plugin that checks how old the newest data is that an InfluxDB 2 Flux query returns, to catch measurements that stopped arriving. Written in Python 3 with the standard library only. The plugin was check_influxdb_data_age.py in the monitoring-plugins collection; that name is kept as a link. Package: monitoring-plugins-ipmi-power Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: freeipmi, ipmitool Filename: all/monitoring-plugins-ipmi-power_0-0_all.deb Size: 3320 MD5sum: 69e0667f625637bef337c2763b044b8b SHA1: f3a424bf42c971395553804eba60b8489de164b6 SHA256: 5769554f2e02161e57ad1e84ef589b3517ee1f2e853b0c00f3dd82664c4783e2 Section: libs Priority: optional Description: Uses ipmitool from freeipmi to check is a system is powered. Useful as master for service dependencies. Package: monitoring-plugins-ipmi-sensor3 Version: 3.14-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 70 Depends: perl:any, freeipmi-tools (>= 0.5.1), libipc-run-perl Conflicts: monitoring-plugins-ipmi-sensor1, monitoring-plugins-ipmi-sensor2 Filename: all/monitoring-plugins-ipmi-sensor3_3.14-2_all.deb Size: 28548 MD5sum: 95e1f1de9fbe63ec2b65fe335cb7bb3b SHA1: 265c80d2c8ab6a6195f9c67da97ed07913f4a902 SHA256: 633c65d68c58d0040c00cb31c51aae215bfbd4a7640948f11d4060406f5dc477 Section: net Priority: optional Homepage: https://github.com/thomas-krenn/check_ipmi_sensor_v3 Description: Nagios/Icinga plugin to check IPMI sensors using FreeIPMI This plugin uses FreeIPMI tools to check IPMI sensors. Sensors can be checked all at once, in groups, or individually. Performance data is provided. Package: monitoring-plugins-isg-wpm-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 62 Depends: python3 (>= 3.8) Suggests: bash-completion Filename: all/monitoring-plugins-isg-wpm-sensor_0.2.1-1_all.deb Size: 17644 MD5sum: e6e2ab14930f5d558b5ed502b252b9c4 SHA1: 05030fb4472275c9774070bf8b410426ee60d17d SHA256: 8d682ba8bc5e53df945948dfa97b5a69bf7b48a518566d06c5898f51d38c22f9 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_isg_wpm_sensor Description: Checks Stiebel Eltron heat pumps with WPM via Modbus TCP of the ISG Checks a Stiebel Eltron heat pump with a heat pump manager WPM (WPMsystem, WPM 3, WPM 3i) via the Modbus TCP interface of the Internet Service Gateway (ISG web with the Modbus TCP/IP software extension). Supports checking a numeric value against thresholds (-c may be smaller than -w), that one value stays above or below another by a margin, a boolean expression over pumps and status bits, a regular expression against a coded value such as the operating mode, and faults and bus errors. The plugin only reads registers. Package: monitoring-plugins-jitsi Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: python3-requests Filename: all/monitoring-plugins-jitsi_0-0_all.deb Size: 4932 MD5sum: f5276ee64991335e10f450fe333ddf5e SHA1: d012cd0ec7115dedc2bac084b9bfab69f543f600 SHA256: 93d98f802bd8ad910585f3309a44ce880392938591efc4d509aae7e4968e6d7b Section: libs Priority: optional Description: Uses jitsi's JVB API to optain statistics from jitsi services. Package: monitoring-plugins-linux-raid Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Conflicts: nagios-plugins-linuxraid Replaces: nagios-plugins-linuxraid Filename: all/monitoring-plugins-linux-raid_0-0_all.deb Size: 3742 MD5sum: e6e90e78ed9678b7b8c268018884fc48 SHA1: 5159c71d045345e5ea560504f9a8a3f7ef7e9768 SHA256: cf459851dfff952dba90bdf8d221e9adbc7ab168c7a841f735f922d03610aff9 Section: libs Priority: optional Description: This plugin checks the status of a local Linux software RAID via the /proc/mdstat interface. Package: monitoring-plugins-mailq Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: perl, monitoring-plugins-common Filename: all/monitoring-plugins-mailq_0-0_all.deb Size: 7832 MD5sum: b393b5cd857976c82f032883b958e250 SHA1: a5080b2e361e547e0bed3b1a59c0be77d9952f0d SHA256: 37909b115c894a56c66f1fdaa01a906847edef055226bd87b5589418a3d30449 Section: libs Priority: optional Description: Checks the mail queue length via mailq/qmail-qstat, autodetecting or selecting sendmail, postfix, qmail, exim or nullmailer. Package: monitoring-plugins-mem Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: procps, gawk Filename: all/monitoring-plugins-mem_0-0_all.deb Size: 3238 MD5sum: bd1a70d4ec8af1b4eef3a87d0bfe0824 SHA1: f14377e42ede548327e4beb31f6bd10d4e338f10 SHA256: 1eb9a414b55c784a7ef51ce08a0916b1ea72fe17a5edda5cba48e49e3b67ef62 Section: libs Priority: optional Description: Uses command free to get free (buffered or unused) memory. Package: monitoring-plugins-nextcloud Version: 0.4.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-nextcloud_0.4.1-1_all.deb Size: 12188 MD5sum: 93bf9078276574ff6e841a4175bbc845 SHA1: b2d559f0ca5d60489fc9d1220157b683dcd0664f SHA256: 92efb2fd479894c834df05531586d22f19b0bd9ca434b92e8689c0a436cc086b Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_nextcloud Description: Nagios/Icinga plugin to check a Nextcloud instance Nagios/Icinga plugin for Nextcloud, written in Python 3 with the standard library only. The health mode reads the unauthenticated status.php, every other mode reads the REST API of the serverinfo app. . Modes: * health: is the instance installed, out of maintenance mode and answering * cpu: the load average of the server * memory: the RAM and swap usage of the server * freespace: the free space of the data directory * storage: files, users, storages and database size * users: the number of recently active users * apps: the number of apps with an available update * rotate: replaces the app password, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-nfs-health Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: gawk, bc Filename: all/monitoring-plugins-nfs-health_0-0_all.deb Size: 5694 MD5sum: 5fe11a3bdc4ea89909395af04c309454 SHA1: 36e915354ef65af0a63a3bd6a52e9c330996a855 SHA256: 952b50167518f0cf7190817b9532276f33b81a296f164e3b3b23a50e4d7d9d64 Section: libs Priority: optional Description: Checks status and health of a nfs server. Package: monitoring-plugins-ntrip-caster Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 50 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-ntrip-caster_0.3.1-1_all.deb Size: 15268 MD5sum: 6dedc25b178900ec3fda7df450b6a436 SHA1: 3ccfc999206cdf31826cf578cf8606ff43965456 SHA256: 0a82964d72b95d887495d4b4ee7f8ea0512a123250c92c9d4fdc8501863f5a64 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_ntrip_caster Description: Nagios/Icinga plugin to check NTRIP casters Nagios/Icinga plugin that checks whether an NTRIP caster serves current GNSS correction data, written in Python 3 with the standard library only. . Modes: * sourcetable: complete sourcetable, caster clock and a listed mountpoint * stream: valid RTCM3 data and the age of the newest observation epoch . The stream mode decodes the observation epochs of GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS and NavIC messages and compares them with the local clock. It also reports the satellites per constellation and the mean C/N0, and can alert on them, on the station position from 1005/1006 and on message types that must arrive. Package: monitoring-plugins-ntrip-clients Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: bash, gawk | mawk, iproute2, sudo Filename: all/monitoring-plugins-ntrip-clients_0.1-1_all.deb Size: 6802 MD5sum: be66597a4020dd361805a9ac6c0084a2 SHA1: 3b112f5b906107dd01ed76012e5c32f0d3185f51 SHA256: aecca2ca3f20ddfa461aa210a0fcd4e142e74391a3b986a32b26ae7ffa4981f7 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_ntrip_clients Description: Nagios/Icinga plugin to check the clients of a local NTRIP caster Checks how many clients are connected to a local NTRIP caster, e.g. RTKLIB str2str with an ntripc:// output as used by RTKBase. str2str accepts at most 32 clients and never times out clients that send no valid request, so scanners can take all slots while the service keeps running. . It reports the accepted clients, the stale clients and the connections waiting in the listen queue. The plugin needs root or the caster's user; a sudoers snippet for the user nagios is included. Package: monitoring-plugins-nvidia-smi Version: 0.1.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 47 Depends: python3 Suggests: bash-completion Filename: all/monitoring-plugins-nvidia-smi_0.1.1-1_all.deb Size: 12882 MD5sum: 123ab1ea4515b1aa5e589a3c2429c246 SHA1: b7487346a01d13795512b5b0a537f9c068a7f0a7 SHA256: d44950a97052d18d2b8aa29537ad70c2724eb2ccd5688857bdc439856f542662 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_nvidia_smi Description: Nagios/Icinga plugin to check NVIDIA GPUs via nvidia-smi Nagios/Icinga plugin that checks NVIDIA GPUs with nvidia-smi: temperature, power, clocks and the reasons they are lowered, memory, load, fan, PCIe link and ECC, with all values in the performance data. Python 3 with the standard library only. . It supersedes check_nvidia_smi_temperature (monitoring-plugins-nvidia-smi-temperature); both can be installed. . Requires the proprietary NVIDIA driver (providing nvidia-smi) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-nvidia-smi-temperature Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 20 Suggests: bash-completion Filename: all/monitoring-plugins-nvidia-smi-temperature_0.2-1_all.deb Size: 4102 MD5sum: 4be901654a75e3d7981d6f59e6cc63cd SHA1: 1d3007a17dca5215bb8881f4a8989bd195ee9fbe SHA256: 8f69058763527b193f350de549db7244cd8a3bff240b926ff8f8d7e03e42e4b2 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_nvidia_smi_temperature Description: Checks NVIDIA GPU temperatures via nvidia-smi Uses nvidia-smi to check the temperature of one or more NVIDIA GPUs. Requires the proprietary NVIDIA driver (providing nvidia-smi) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-openvpn Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: python3 Filename: all/monitoring-plugins-openvpn_0-0_all.deb Size: 5240 MD5sum: 4b424d5fc6dedb96c69118c439be7dd1 SHA1: 8482c5172c173b5e09215832c874cc3c66b9c42a SHA256: 4626c28dda748109376f6fdd57c358af2aa3d8f80d4c0332d0ba6329fb927ccb Section: libs Priority: optional Description: Check if an OpenVPN server runs on a given UDP or TCP port. Package: monitoring-plugins-openwrt Version: 0.5.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 66 Depends: python3 (>= 3.7), openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-openwrt_0.5.2-1_all.deb Size: 20066 MD5sum: e46c43712801f2e82a75099fd9791a6e SHA1: 19e63792d6dc6982c52c67022fe1e89bb7876b5f SHA256: 1abfe6648c96ee58a10558a7dd8cb9cbd8c5391ac77ffa8710ade3be445687fc Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_openwrt Description: Agentless Nagios/Icinga plugin for OpenWrt devices via SSH Agentless Nagios/Icinga plugin for OpenWrt devices. All checks run over SSH with tools of a default OpenWrt image (BusyBox, ubus, uci, opkg/apk, and wg for WireGuard), so nothing has to be installed on the device. . Checks: memory, disk, load, uptime, conntrack table, netifd interfaces, wifi radios and clients, WireGuard handshake age, procd services, upgradable packages, banIP block lists, temperatures, and the internet access of the device (DNS, ping, HTTP(S)). Thresholds use the standard range format, and all checks print performance data. Package: monitoring-plugins-part-db Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 63 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-part-db_0.3-1_all.deb Size: 19604 MD5sum: bd61d1a723fc61e673a28d9c9f744aba SHA1: 899059e6ab6447961e459771789e954b096dc13f SHA256: 1840700efad6d4cd7f889d3b0d0be68ba47854597421ac457d21b0870cb6d9b5 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_part-db Description: Nagios/Icinga plugin to check a Part-DB instance Nagios/Icinga plugin for Part-DB (https://github.com/Part-DB/Part-DB-server), usable with Nagios, Naemon, Icinga and anything else speaking the monitoring plugins API. It queries the Part-DB REST API and, for the frontend check, its web UI, so the monitoring host needs only network access and an API token. . Modes of check_part-db: * health: API reachability, token validity, database answer * web: web frontend response and TLS certificate expiry * stats: counts of parts, categories, footprints, suppliers * stock: parts below their configured minimum amount * token: days until the API token expires, CRITICAL below 30 . Only the Python 3 standard library is used. Package: monitoring-plugins-podman Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 31 Depends: python3 (>= 3.7), sudo Recommends: podman Suggests: bash-completion Filename: all/monitoring-plugins-podman_0.2-1_all.deb Size: 9240 MD5sum: 9efe1dd08fe4e38b9f01c1dc24b73a2d SHA1: 761f5df170c8762d870beb6b621dda02bf13ae38 SHA256: b2f73b6a2e9f9c27c5c1f8573e314cd613e8771b5a69f0736bd0bc192f6f7d25 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_podman Description: Nagios/Icinga plugin to check the containers of a rootless podman user Nagios/Icinga plugin that checks the containers of a rootless podman user via sudo, written in Python 3 with the standard library only. . It checks that every container is running, reports CPU, memory, network and block I/O usage of each as performance data, and alerts when a container gets close to its memory limit. It needs a NOPASSWD sudoers rule for "podman ps" and "podman stats" as the rootless user, and lingering for that user; see the README. Package: monitoring-plugins-postfix-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: postfix Filename: all/monitoring-plugins-postfix-queue_0-0_all.deb Size: 3306 MD5sum: 479976bf6e7c3b0fc8cce2b6e5461be1 SHA1: 23ea30821432e9afa9ac18fa205dc7d2a4616e66 SHA256: 6416bd36fe9b6933998fba7b93a65dde0908aaf695ff5427649374cfdc22af96 Section: libs Priority: optional Description: Uses mailq to check the length of the queue of postfix. Package: monitoring-plugins-postfix-relay Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 29 Depends: postfix, python3 (>= 3.7) Recommends: sudo Suggests: bash-completion Filename: all/monitoring-plugins-postfix-relay_0.2-1_all.deb Size: 8848 MD5sum: 42308cabbb2c2b46713bde4bb511dadd SHA1: 381f9d155ddcd248a5dbade8840e4ea09a9a0457 SHA256: 9ac7285fe3166e107c500f5aa4bb0e3e3b36d9a080f6a9d5a62cf973f669d2b3 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_postfix_relay Description: Nagios/Icinga plugin to check that Postfix can log in to its relays Nagios/Icinga plugin that checks that Postfix can log in to the relays it sends through, written in Python 3 with the standard library only. . It tests the relayhost and every relay in sender_dependent_relayhost_maps: connection, STARTTLS and SASL login with the credentials Postfix itself would use (also by sender, smtp_sender_dependent_authentication), and optionally MAIL FROM/RCPT TO without sending. Relays and logins come from the Postfix configuration, so no password is needed in the monitoring configuration. It needs root for the SASL password map, e.g. through a NOPASSWD sudoers rule; see the README. Package: monitoring-plugins-printer-php Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 47 Depends: php-cli, php-snmp Suggests: bash-completion Filename: all/monitoring-plugins-printer-php_0.2-1_all.deb Size: 14278 MD5sum: 5a2ef37ff41a378667fce65dec91c736 SHA1: e5cb46c98bd743614de37736c8637e0d20210a30 SHA256: 6c3e8f50f61a14d3d454bc0d4d48b3187ce4cb18fc02884cc5bcfb762cb11fdd Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_printer Description: Nagios/Icinga plugin to check a printer via SNMP Checks a printer via SNMP: toner and ink levels, paper trays, covers, hardware, the alert table and page counters. It uses the standard Printer-MIB and Host Resources MIB, so it works with most network printers, plus private MIBs of Ricoh and Kyocera. . Named check_printer.php (not check_printer) since Debian's monitoring-plugins-contrib package already ships its own, different, check_printer. Package: monitoring-plugins-proxy Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: wget, bc, gawk Filename: all/monitoring-plugins-proxy_0-0_all.deb Size: 4282 MD5sum: 712bf13423b045613bba76f4ca46f873 SHA1: 746ff64a3374c5e49eedc6190daeacd4d0aabae5 SHA256: 6817bb237db6c36553ab8836ef1314985f6bce6ea6a39dec18433a14a57523c1 Section: libs Priority: optional Description: Uses wget to obtain a file directly and through a proxy. Then it compares if the files are identical. Caution: lot's of websites include the time in their source code. These will be always different. Package: monitoring-plugins-psu-power Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 26 Depends: bash, coreutils, gawk | mawk, grep, ipmitool, sudo Suggests: bash-completion Filename: all/monitoring-plugins-psu-power_0.2-1_all.deb Size: 8986 MD5sum: a69ed6bc04d412fba77e883b19373e61 SHA1: fc880bbbf62f9089146c61c1d5fc5ecfbd4bb23a SHA256: 64459c5616de436da367175339b6b4bbaaaea0379dd5f587dfc76a2581068dcd Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_psu_power Description: Nagios/Icinga plugin to check power consumption and PSU health via PMBus Nagios/Icinga plugin that reads the power supplies of a server over the BMC with IPMI Master Write-Read (PMBus): input power of each PSU and their sum, input voltage, temperature and fan speed, with thresholds for the total power and performance data. . ipmitool needs root (/dev/ipmi0), so the plugin calls it through sudo; the README has a sudoers example that allows only the PMBus reads. The probe script in the documentation finds the PSU addresses on the I2C bus. Package: monitoring-plugins-raspberry-voltage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-raspberry-voltage_0-0_all.deb Size: 3618 MD5sum: 97f7871149536a29079189fa446ab8b6 SHA1: 22db7fa35c46265e9889805ae4b19c2d4ee79417 SHA256: f8664e97010c625e654da8c2c207c55338a9fb091886afcfaae80590c18e9470 Section: libs Priority: optional Description: Uses vcgencmd to report the core, sdram_c, sdram_i and sdram_p voltage rails as performance data, and checks vcgencmd get_throttled for under-voltage of the power supply. Requires vcgencmd (provided by Raspberry Pi OS's userland tools) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-remote-load Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 20 Depends: bc, openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-remote-load_0.2-1_all.deb Size: 3992 MD5sum: 49b988852ac8fc25e4b5c1f3f20b9642 SHA1: 814ec230302ceef96f2d81316dac04db2fd7abda SHA256: 7c12169281e52fadeaf779fb8dafed28980f75003fd1ca3404cb8b8e1841c615 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_remote_load Description: Check /proc/loadavg via ssh Connects via ssh to a remote machine, reads /proc/loadavg, and checks the 1 m, 5 m and 15 m averages. Package: monitoring-plugins-reprise-server Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 33 Depends: python3 (>= 3.7) Recommends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-reprise-server_0.2-1_all.deb Size: 9628 MD5sum: 81b83e78641820fbd08fcc4fafba3fb1 SHA1: a0d1b65d50e7e5a230433f14c9a4018c5e772dc3 SHA256: 90215c861b701e85cb498bcae87d43adb77776b75a3afd4f429a1f38abaaeb6c Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_reprise_server Description: Nagios/Icinga plugin to check Reprise License Manager servers Nagios/Icinga plugin that checks a Reprise License Manager (RLM) server with rlmutil, written in Python 3 with the standard library only. . It checks that the rlm server and its ISV servers are up, reports the usage of every product as performance data, and alerts on the days until the earliest expiry of any product. rlmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-sensor Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 29 Depends: jq, lm-sensors Suggests: bash-completion Filename: all/monitoring-plugins-sensor_0.1-1_all.deb Size: 7266 MD5sum: 2da3d2e004b9ff8af418ffb5bb420fa3 SHA1: d9cfd4de575263e2fda009e723c4779db56e7e02 SHA256: 705ef68b2ccc022e9d3e6ddff6b471dee3c4c0cbbc7bda670d3ed3fb6eecd271 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_sensor Description: Nagios/Icinga plugin to check hardware sensors read by lm-sensors Checks a hardware sensor read by lm-sensors, such as a temperature, fan speed or voltage, against the limits and alarms of the chip or against given levels, with the value in the performance data. It reads the JSON of both newer (sensors -J) and older (sensors -j) lm-sensors, and lists the sensors with -l. Package: monitoring-plugins-smb Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: smbclient, monitoring-plugins-common Filename: all/monitoring-plugins-smb_0-0_all.deb Size: 3036 MD5sum: daa8c1f2ff91b18a60c527ec3821b194 SHA1: 01c2ff960876b4a4f505c1d5e1072393d5d8af26 SHA256: b6c1e483225154958a39689f17cd32cb7d7e95e0ae7f215456cbaa24bb272729 Section: libs Priority: optional Description: Uses smbclient to connect anonymously to a samba server. Package: monitoring-plugins-snmp-printer-supply Source: monitoring-plugins-snmp-printer Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: snmp Suggests: bash-completion Filename: all/monitoring-plugins-snmp-printer-supply_0.3-1_all.deb Size: 5274 MD5sum: a0c14dcba737f17f7024311aa1e8d07a SHA1: e6a8b38f0337d779fec12e387f7bea1fbe05e56a SHA256: 5c1288e09e1c0e4cc89dc59497d72db2daf1a340aba954a6d185712375c20060 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_snmp_printer Description: Checks the supplies and trays of a printer via SNMP Uses snmpwalk to connect to a printer and check its supplies and the paper level of its trays. Package: monitoring-plugins-ssh-date Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: python3, openssh-client Filename: all/monitoring-plugins-ssh-date_0-0_all.deb Size: 3260 MD5sum: aa3edb3a960c602e90feba556a74c99f SHA1: 7203728ef4353a2f498102018167d74aa89104c1 SHA256: 9174ab7fdc71ade2727544b316d90a136c986633456430cc5972312c3a6ff758 Section: libs Priority: optional Description: Uses ssh to run "date -R" on a remote host and compares the result to the local date and time to detect clock drift. Package: monitoring-plugins-ssl-cert Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 292 Depends: openssl Filename: all/monitoring-plugins-ssl-cert_0-0_all.deb Size: 49560 MD5sum: 46f2ab5f6b5fcd56eaed07408d910713 SHA1: e7a2a25efd6164820ec07aab66e24d14179e0780 SHA256: 25ea6fa3bce246ad212d18c4bb021a9d80a4309c29b43a541f60079d03d69f90 Section: libs Priority: optional Description: Uses openssl to check validity, expiration and other properties of X.509 certificates. See https://github.com/matteocorti/check_ssl_cert. Package: monitoring-plugins-storcli Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: bash, coreutils, grep, jq, sudo Suggests: bash-completion Filename: all/monitoring-plugins-storcli_0.2-1_all.deb Size: 9002 MD5sum: c6e961ef1e81454132cdb0f622c4b1c6 SHA1: c3b5f7ea20dbaf4a065da75c92c7589238f7b673 SHA256: f7ddbcb64ad836d74fbf0ab9d2ba1fe8475b2fb36865fbc0a0c253dca618dac4 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_storcli Description: Nagios/Icinga plugin to check MegaRAID controllers via storcli Nagios/Icinga plugin that checks Broadcom/LSI MegaRAID controllers with storcli64: controller, virtual drive and physical drive states, media and other errors, predictive failures, and the temperatures of the drives and the controller (ROC), with performance data. . storcli64 itself is not included; install it from Broadcom. storcli needs root, so the plugin calls it through sudo; the README has a sudoers example that allows only the two read-only calls. Package: monitoring-plugins-stun-turn Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-stun-turn_0.2.1-1_all.deb Size: 11414 MD5sum: afe21b0b24074611ba463c28a2dba279 SHA1: 43f0cbc7acc8dfc32f89345140c34fc30120261b SHA256: f1bf98ac790e7c2f14bc51cfc160fef3df81aa1a1d7aaa0dc69e1e4441aa4a0e Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_stun_turn Description: Nagios/Icinga plugin to check STUN/TURN servers Nagios/Icinga plugin for STUN/TURN servers such as coturn, written in Python 3 with the standard library only. . Modes: * stun: binding request, mapped address and response time * turn: authentication challenge, or with credentials (long-term or the shared secret of the TURN REST API) a relay allocation that is released again . Both modes work over UDP, TCP and TLS and check the TLS certificate. Package: monitoring-plugins-systemd-service Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-systemd-service_0-0_all.deb Size: 3208 MD5sum: fcb480a9e4682ee7aa5e8cb4376da33c SHA1: f9b2c449b0a00f505c396410a42ca3dce9ea89b3 SHA256: 4c234feadb11f47824eeef2344fe6a24a9126acf8c6a610b312634514b78fb4d Section: libs Priority: optional Description: For a *.service it checks if it is prestent, enabled and alive. Extension for openSUSE: also check is a mountpoint is active. Package: monitoring-plugins-systemd-sh Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: openssh-client, systemd Suggests: bash-completion Filename: all/monitoring-plugins-systemd-sh_0.3-1_all.deb Size: 5672 MD5sum: 5c6613c0bafec56c80a30536e9f5e59a SHA1: d2304fea57788c6929eb6e9aa6985715f37d5559 SHA256: cdfb9b0af25eda33ff0cd758966a498b530bf149a197088245e26971d4f7daf5 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_systemd.sh Description: Nagios/Icinga plugin to check failed systemd units and the boot time Checks systemd on a local or remote machine via systemctl: the boot time, failed units, and services that have to be running. Package: monitoring-plugins-tasmota-sensor Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 42 Depends: python3 (>= 3.8), python3-requests Suggests: bash-completion Filename: all/monitoring-plugins-tasmota-sensor_0.3.1-1_all.deb Size: 12184 MD5sum: f8e8a29eeecd34532e95ee9bfd964e7b SHA1: dfecbbb5e7578c6c1aaa6ef8ae94408c690d413c SHA256: 7c2198b4d26153b95585b4c7671fec6cbcfad9744acaab2d3bf596f77259f9e1 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tasmota_sensor Description: Checks Tasmota devices via the HTTP command API Checks Tasmota devices via the HTTP command API (/cm?cmnd=...). Supports checking a numeric sensor value against thresholds (-c may be smaller than -w), the time offset of the device's own reported time against the local clock or an NTP server, a boolean expression over POWER-style relay states, and a regular expression match against a sensor field's value. Package: monitoring-plugins-tftp Version: 0.1.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: tftp-hpa Suggests: bash-completion Filename: all/monitoring-plugins-tftp_0.1.2-1_all.deb Size: 5228 MD5sum: 131233483e091c8db1a7c15318a8504b SHA1: a1d3896fb0356b7e01fbbb8fe1546cba04eb6147 SHA256: 884a41f89f47545ca11be83acb9eb13c8c4d4bfd361c717a465971bc65caefd3 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tftp Description: Nagios/Icinga plugin to check that a TFTP server serves a file Checks a TFTP server, e.g. for PXE boot, by downloading a file with the tftp-hpa client. A file that is served is OK, a TFTP error such as "file not found" is a WARNING, and no answer is CRITICAL. The download time and the file size go into the performance data, with thresholds for both. Package: monitoring-plugins-thermal-zone0 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-thermal-zone0_0-0_all.deb Size: 3248 MD5sum: 2e024ae84889dca09b0268b0f0a20363 SHA1: 7241d1ee72ba4d089a3262c3653b9cf852253f76 SHA256: 62404ee2da543026aa7d4e7a13be46a2e2b852270f2eb854f2729b8988bbc87d Section: libs Priority: optional Description: Reads /sys/class/thermal/thermal_zone0/temp to check the SoC/board temperature, as found on Raspberry Pi and many other ARM boards. Package: monitoring-plugins-tor-proxy Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: curl | wget Suggests: bash-completion Filename: all/monitoring-plugins-tor-proxy_0.3-1_all.deb Size: 6290 MD5sum: 512c63fe71ec0b3f2f0e3761f8c7ddd1 SHA1: 5012cc8d09b2dbffbb0032fd4a8d3372489c2b71 SHA256: 6d889c8282b49f0d4cdaaec2d2b61538956d81bc7608ba56f9c223dc9b0daef6 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tor_proxy Description: Nagios/Icinga plugin to check that a proxy exits to the Tor network Nagios/Icinga plugin that checks whether a proxy exits to the Tor network, by asking the check service of the Tor Project through it. Works with SOCKS proxies such as Tor itself and HTTP proxies such as Privoxy in front of Tor, using curl or wget; SOCKS proxies need curl. Package: monitoring-plugins-ts3 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: expect Filename: all/monitoring-plugins-ts3_0-0_all.deb Size: 3240 MD5sum: 42710ff74ca1a3b73774f58d91293559 SHA1: 6ff0101746e088435d548220a071905e26c16d62 SHA256: 91d673970fc2dcf7a4a2ede76dd3c2fb004472c1e56d6f7cfe58ddef039c50ad Section: libs Priority: optional Description: Connects to the dataport of a teamspeak server and checks for its characterstic respone. Package: monitoring-plugins-vdr-diskusage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, gawk Filename: all/monitoring-plugins-vdr-diskusage_0-0_all.deb Size: 3634 MD5sum: 13a4872f0296de5e695accf0e616fd6c SHA1: a54640566d33691bb349258b2929b8b855cade56 SHA256: a61c703def196d93a91857fc11d62ecd388e9d00e6e215782857fc610b89f18f Section: libs Priority: optional Description: Uses svdrpsend to check disk utilization of VDR. Package: monitoring-plugins-vdr-signalstrength Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, vdr-plugin-femon Filename: all/monitoring-plugins-vdr-signalstrength_0-0_all.deb Size: 3864 MD5sum: 6d0f0f9995092c71ac2cc10b48be752c SHA1: 0a605430f3d1aa81093f79af3c8d39ff7ab0c91f SHA256: 16d3fb615e4d6368b197cff5a6205475637ab9559fea8427501e8a1c70c7033e Section: libs Priority: optional Description: Uses svdrpsend to connect to a VDR using the femon plugin. Package: monitoring-plugins-zyxel-hw-monitor Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 68 Depends: snmp, gawk | mawk Recommends: python3 Suggests: bash-completion Filename: all/monitoring-plugins-zyxel-hw-monitor_0.2-1_all.deb Size: 9144 MD5sum: f54fcac5112899a11a48b35f1a5af6ba SHA1: 668b1a232175c1d5bdcaba4b2bd24f569c5f7ec5 SHA256: 342d3a6b89acf5039a2122f094b075bd124e90aceac61a23716edd8668d3af27 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_zyxel_hw_monitor Description: Nagios/Icinga plugins to check Zyxel devices via SNMP Plugins for monitoring Zyxel devices via SNMP, based on the ZYXEL-HW-MONITOR-MIB and ZYXEL-ES-COMMON MIBs. They are compatible with Nagios, Icinga and other monitoring systems supporting Nagios plugins. . Included checks: * check_zyxel-cpu: CPU usage (%) * check_zyxel-mem: memory usage (%) * check_zyxel-flash: flash usage (%) * check_zyxel-fan: fan RPM (indexed sensor) * check_zyxel-temperature: temperature (indexed sensor) * check_zyxel-voltage: voltage (indexed sensor) * check_zyxel-power: power source status (indexed source) * check_zyxel-time: switch time skew against an NTP server or local time . All plugins use numeric OIDs, so no MIB files are needed on the monitoring host. SNMPv2c and SNMPv3 are supported. Package: mqtt2logger Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 65 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, python3 (>= 3.7), python3-paho-mqtt, python3-yaml Suggests: bash-completion Filename: all/mqtt2logger_0.2.1-1_all.deb Size: 15840 MD5sum: 94f1dba1323536d659268b064c5f2e55 SHA1: a3cc9a25d85bb18ff9e31b638fc7d0c51441d645 SHA256: dc54fbe99637cf77661572e1ab4afd1f09e6e850c922f52f76816577fad86ca2 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/mqtt2logger Description: Forward the MQTT logs of ESPHome and Tasmota devices to rsyslog and journald Subscribes to the log topics of ESPHome and Tasmota devices on an MQTT broker and forwards each log line to rsyslog (RFC 5424, with the device as host name) and to systemd-journald, each configurable. Severity and time stamp are taken from the messages where they contain them. A persistent MQTT session lets the broker keep QoS 1 messages while the daemon is down, and queues keep messages while rsyslog or journald are unavailable. The systemd service runs as the user mqtt2logger and is not enabled by default. Package: purge-postfix-mails Version: 0.4-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 24 Depends: jq (>= 1.6), postfix (>= 3.1) Suggests: bash-completion Filename: all/purge-postfix-mails_0.4-1_all.deb Size: 4928 MD5sum: b74a69a6ff79dfbc6a9723e6610988f6 SHA1: 5413500f2fc5aa49e6bae0dc7a5203deaa5302ff SHA256: 6722c3ba392f03619b3378870b01313a29bf23f21fd9570165f1a9c839a023c2 Section: mail Priority: optional Homepage: https://github.com/Aikhjarto/purge_postfix_mails Description: Scripts to break a mail loop by purging undeliverable mails from Postfix Scripts that break a mail loop in Postfix, as caused by a machine mailing its admin about every logged error while the relayhost is unreachable, by deleting the queued mails that cannot be delivered: * purge_postfix_mailer_daemon.sh deletes bounces, mails to postmaster@myorigin and queued mails that mention postmaster or MAILER-DAEMON of myorigin * purge_postfix_mails.sh additionally deletes deferred mails the relayhost refused * purge_postfix_per_recipient.sh deletes the mails to given recipients * purge_postfix_per_sender.sh deletes the mails from given senders Package: rapl-mqtt Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: python3 (>= 3.9), mosquitto-clients Filename: all/rapl-mqtt_0.1-1_all.deb Size: 5730 MD5sum: 8ecae035257573d93ff77970fd49eed4 SHA1: 53089fecfa91553e0953ef3a13c368062d186679 SHA256: 6bfb78f515f440b1dea668c8c9daa7c5078ed6dae79749b1629c3362c688e0fa Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/rapl-mqtt Description: Publish the CPU's RAPL power to MQTT Reads the energy counters of the CPU's RAPL (Intel since Sandy Bridge, AMD since Zen) and publishes the average power of each zone (package, cores, DRAM) in watts to an MQTT broker, once a minute. Home Assistant MQTT discovery configs are published too, so the zones show up as power sensors. . Options for the service go into RAPL_MQTT_OPTS in /etc/default/rapl-mqtt, e.g. RAPL_MQTT_OPTS="--broker mqtt.example.lan"; the default broker is localhost. The service is not enabled on installation. Package: rsyslog-maillog Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 33 Depends: rsyslog Filename: all/rsyslog-maillog_0.1-1_all.deb Size: 7078 MD5sum: 4debb6fcec3b12e2e8009ba2a4cce2f6 SHA1: 5d63e064c71270f4fb5a152b467a5531bae7e8fe SHA256: 4a14b36b5151976e38599bcdb466b030e434e067c7bcc0c41b0a61164a5cd6c7 Section: admin Priority: optional Homepage: https://github.com/Aihjarto/rsyslog-maillog Description: This project provides a config for forwarding important log lines in rsyslog via postfix. Package: vdradmin-am Version: 3.6.13-1.1 Architecture: all Maintainer: Debian VDR Team Installed-Size: 1366 Depends: perl:any, libio-compress-perl, libtemplate-perl, liburi-perl, libio-socket-inet6-perl, libsocket6-perl, liblocale-gettext-perl | libintl-perl, libwww-perl, adduser, libtemplate-plugin-javascript-perl, libcgi-pm-perl Suggests: vdr (>= 1.7.15), libauthen-sasl-perl, vdr-plugin-epgsearch (>= 0.9.23) Conflicts: vdradmin Replaces: vdradmin Provides: vdradmin Filename: all/vdradmin-am_3.6.13-1.1_all.deb Size: 297928 MD5sum: 6024e40d2ba5dcb4467fc9cbdece4a78 SHA1: d450900e24425c5aea92a7cffefc63b33a7b6264 SHA256: e3022727d60d5d95a50c8b97814c50a952c6e05cd569f1d1f5f42eefac729b91 Section: video Priority: optional Homepage: http://andreas.vdr-developer.org/vdradmin-am/index.html Description: Web-based administration tool for vdr vdradmin-am provides a webinterface for managing the Linux Video Disk Recorder (vdr) Package: vm-boot-order-2 Version: 0.3.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 42 Depends: python3 (>= 3.7), python3-libvirt Recommends: sysstat Suggests: bash-completion Filename: all/vm-boot-order-2_0.3.2-1_all.deb Size: 11850 MD5sum: 52e1120dd24af62abf43360332d6626e SHA1: ca01740e43a57af57ff605ac823cbf9d7960621e SHA256: 6e1d347dfdf23d768418eeed25c6bde1c8b4ea01dfd1246259671ffc2cce9264 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/vm-boot-order-2 Description: Start libvirt VMs in order at boot and shut them down in parallel Starts libvirt VMs one after another in a configured order at boot, and shuts them down in parallel at system shutdown. After starting a VM, it waits up to a configured time, or until the I/O load of a configured disk drops, before starting the next one. At shutdown, VMs that do not stop within a timeout are powered off. . The service is installed but not enabled. Configure the VMs in /etc/vm-boot-order-2.conf, check it with "vm-boot-order-2.py status", and disable libvirt autostart for those VMs.