Source: iem-plugin-suite
Section: sound
Priority: optional
Maintainer: 3rdp4r7yr3p0 <3rdp4r7yr3p0@gmail.com>
Build-Depends:
 debhelper-compat (= 13),
 build-essential, cmake, dh-exec, dpkg-dev, juce-8.0.10-src, ladspa-sdk, libasound2-dev, libcurl4-openssl-dev, libfftw3-dev, libfontconfig-dev, libfreetype-dev, libglu1-mesa-dev, libjack-jackd2-dev, libx11-dev, libxcomposite-dev, libxcursor-dev, libxext-dev, libxinerama-dev, libxrandr-dev, libxrender-dev, lv2-dev, mesa-common-dev, pkgconf, vst2sdk,
Standards-Version: 4.6.2
Rules-Requires-Root: no
Homepage: https://plugins.iem.at
Vcs-Git: https://git.iem.at/audioplugins/IEMPluginSuite.git
Vcs-Browser: https://git.iem.at/audioplugins/IEMPluginSuite

Package: iem-plugin-suite
Architecture: all
Depends: iem-plugin-suite-standalone, iem-plugin-suite-lv2, iem-plugin-suite-vst, iem-plugin-suite-vst3,
Description: The IEM Plug-in Suite is a free and Open-Source audio plugin suite (Meta-Package).
 The IEM Plug-in Suite is a free and Open-Source audio plugin suite including
 Ambisonic plug-ins up to 7th order created by staff and students of the
 Institute of Electronic Music and Acoustics.
 .
 This Meta-Package provides an easier way to install ALL the "IEM" Plugins.

Package: iem-plugin-suite-standalone
Architecture: all
Depends: iem-allradecoder-standalone, iem-binauraldecoder-standalone, iem-coordinateconverter-standalone, iem-directionalcompressor-standalone, iem-directivityshaper-standalone, iem-distancecompensator-standalone, iem-dualdelay-standalone, iem-energyvisualizer-standalone, iem-fdnreverb-standalone, iem-granularencoder-standalone, iem-matrixmultiplier-standalone, iem-multibandcompressor-standalone, iem-multiencoder-standalone, iem-multieq-standalone, iem-omnicompressor-standalone, iem-probedecoder-standalone, iem-roomencoder-standalone, iem-scenerotator-standalone, iem-simpledecoder-standalone, iem-stereoencoder-standalone, iem-toolbox-standalone,
Description: The IEM Plug-in Suite is a free and Open-Source audio plugin suite (Meta-Package).
 The IEM Plug-in Suite is a free and Open-Source audio plugin suite including
 Ambisonic plug-ins up to 7th order created by staff and students of the
 Institute of Electronic Music and Acoustics.
 .
 This Meta-Package provides an easier way to install ALL the "IEM" Standalone
 Applications.

Package: iem-plugin-suite-lv2
Architecture: all
Depends: iem-allradecoder-lv2, iem-binauraldecoder-lv2, iem-coordinateconverter-lv2, iem-directionalcompressor-lv2, iem-directivityshaper-lv2, iem-distancecompensator-lv2, iem-dualdelay-lv2, iem-energyvisualizer-lv2, iem-fdnreverb-lv2, iem-granularencoder-lv2, iem-matrixmultiplier-lv2, iem-multibandcompressor-lv2, iem-multiencoder-lv2, iem-multieq-lv2, iem-omnicompressor-lv2, iem-probedecoder-lv2, iem-roomencoder-lv2, iem-scenerotator-lv2, iem-simpledecoder-lv2, iem-stereoencoder-lv2, iem-toolbox-lv2,
Description: The IEM Plug-in Suite is a free and Open-Source audio plugin suite (Meta-Package).
 The IEM Plug-in Suite is a free and Open-Source audio plugin suite including
 Ambisonic plug-ins up to 7th order created by staff and students of the
 Institute of Electronic Music and Acoustics.
 .
 This Meta-Package provides an easier way to install ALL the "IEM" LV2
 Plugins.

Package: iem-plugin-suite-vst
Architecture: all
Depends: iem-allradecoder-vst, iem-binauraldecoder-vst, iem-coordinateconverter-vst, iem-directionalcompressor-vst, iem-directivityshaper-vst, iem-distancecompensator-vst, iem-dualdelay-vst, iem-energyvisualizer-vst, iem-fdnreverb-vst, iem-granularencoder-vst, iem-matrixmultiplier-vst, iem-multibandcompressor-vst, iem-multiencoder-vst, iem-multieq-vst, iem-omnicompressor-vst, iem-probedecoder-vst, iem-roomencoder-vst, iem-scenerotator-vst, iem-simpledecoder-vst, iem-stereoencoder-vst, iem-toolbox-vst,
Description: The IEM Plug-in Suite is a free and Open-Source audio plugin suite (Meta-Package).
 The IEM Plug-in Suite is a free and Open-Source audio plugin suite including
 Ambisonic plug-ins up to 7th order created by staff and students of the
 Institute of Electronic Music and Acoustics.
 .
 This Meta-Package provides an easier way to install ALL the "IEM" VST
 Plugins.

Package: iem-plugin-suite-vst3
Architecture: all
Depends: iem-allradecoder-vst3, iem-binauraldecoder-vst3, iem-coordinateconverter-vst3, iem-directionalcompressor-vst3, iem-directivityshaper-vst3, iem-distancecompensator-vst3, iem-dualdelay-vst3, iem-energyvisualizer-vst3, iem-fdnreverb-vst3, iem-granularencoder-vst3, iem-matrixmultiplier-vst3, iem-multibandcompressor-vst3, iem-multiencoder-vst3, iem-multieq-vst3, iem-omnicompressor-vst3, iem-probedecoder-vst3, iem-roomencoder-vst3, iem-scenerotator-vst3, iem-simpledecoder-vst3, iem-stereoencoder-vst3, iem-toolbox-vst3,
Description: The IEM Plug-in Suite is a free and Open-Source audio plugin suite (Meta-Package).
 The IEM Plug-in Suite is a free and Open-Source audio plugin suite including
 Ambisonic plug-ins up to 7th order created by staff and students of the
 Institute of Electronic Music and Acoustics.
 .
 This Meta-Package provides an easier way to install ALL the "IEM" VST3
 Plugins.

Package: iem-allradecoder
Architecture: all
Depends: iem-allradecoder-standalone, iem-allradecoder-lv2, iem-allradecoder-vst, iem-allradecoder-vst3,
Description: IEM Suite AllRADecoder (Meta-Package).
 With the AllRADecoder you can design an Ambisonic decoder for an arbitrary
 loudspeaker layout using the AllRAD approach.
 .
 This Meta-Package provides an easier way to install the "AllRADecoder"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-allradecoder-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite AllRADecoder (Standalone Application).
 With the AllRADecoder you can design an Ambisonic decoder for an arbitrary
 loudspeaker layout using the AllRAD approach.
 .
 This package provides the "AllRADecoder" Standalone Application from "IEM".

Package: iem-allradecoder-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite AllRADecoder (LV2 Plugin).
 With the AllRADecoder you can design an Ambisonic decoder for an arbitrary
 loudspeaker layout using the AllRAD approach.
 .
 This package provides the "AllRADecoder" LV2 Plugin from "IEM".

Package: iem-allradecoder-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite AllRADecoder (VST Plugin).
 With the AllRADecoder you can design an Ambisonic decoder for an arbitrary
 loudspeaker layout using the AllRAD approach.
 .
 This package provides the "AllRADecoder" VST Plugin from "IEM".

Package: iem-allradecoder-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite AllRADecoder (VST3 Plugin).
 With the AllRADecoder you can design an Ambisonic decoder for an arbitrary
 loudspeaker layout using the AllRAD approach.
 .
 This package provides the "AllRADecoder" VST3 Plugin from "IEM".

Package: iem-binauraldecoder
Architecture: all
Depends: iem-binauraldecoder-standalone, iem-binauraldecoder-lv2, iem-binauraldecoder-vst, iem-binauraldecoder-vst3,
Description: IEM Suite BinauralDecoder (Meta-Package).
 The BinauralDecoder renders the Ambisonic input signal to a binaural
 headphone signal using the MagLS approach.
 .
 This Meta-Package provides an easier way to install the "BinauralDecoder"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-binauraldecoder-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite BinauralDecoder (Standalone Application).
 The BinauralDecoder renders the Ambisonic input signal to a binaural
 headphone signal using the MagLS approach.
 .
 This package provides the "BinauralDecoder" Standalone Application from
 "IEM".

Package: iem-binauraldecoder-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite BinauralDecoder (LV2 Plugin).
 The BinauralDecoder renders the Ambisonic input signal to a binaural
 headphone signal using the MagLS approach.
 .
 This package provides the "BinauralDecoder" LV2 Plugin from "IEM".

Package: iem-binauraldecoder-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite BinauralDecoder (VST Plugin).
 The BinauralDecoder renders the Ambisonic input signal to a binaural
 headphone signal using the MagLS approach.
 .
 This package provides the "BinauralDecoder" VST Plugin from "IEM".

Package: iem-binauraldecoder-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite BinauralDecoder (VST3 Plugin).
 The BinauralDecoder renders the Ambisonic input signal to a binaural
 headphone signal using the MagLS approach.
 .
 This package provides the "BinauralDecoder" VST3 Plugin from "IEM".

Package: iem-coordinateconverter
Architecture: all
Depends: iem-coordinateconverter-standalone, iem-coordinateconverter-lv2, iem-coordinateconverter-vst, iem-coordinateconverter-vst3,
Description: IEM Suite CoordinateConverter (Meta-Package).
 The CoordinateConverter converts VST parameters from a spherical
 representation to a cartesian, and vice versa.
 .
 This Meta-Package provides an easier way to install the
 "CoordinateConverter" Standalone Application and LV2, VST, VST3 Plugin(s)
 from "IEM".

Package: iem-coordinateconverter-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite CoordinateConverter (Standalone Application).
 The CoordinateConverter converts VST parameters from a spherical
 representation to a cartesian, and vice versa.
 .
 This package provides the "CoordinateConverter" Standalone Application from
 "IEM".

Package: iem-coordinateconverter-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite CoordinateConverter (LV2 Plugin).
 The CoordinateConverter converts VST parameters from a spherical
 representation to a cartesian, and vice versa.
 .
 This package provides the "CoordinateConverter" LV2 Plugin from "IEM".

Package: iem-coordinateconverter-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite CoordinateConverter (VST Plugin).
 The CoordinateConverter converts VST parameters from a spherical
 representation to a cartesian, and vice versa.
 .
 This package provides the "CoordinateConverter" VST Plugin from "IEM".

Package: iem-coordinateconverter-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite CoordinateConverter (VST3 Plugin).
 The CoordinateConverter converts VST parameters from a spherical
 representation to a cartesian, and vice versa.
 .
 This package provides the "CoordinateConverter" VST3 Plugin from "IEM".

Package: iem-directionalcompressor
Architecture: all
Depends: iem-directionalcompressor-standalone, iem-directionalcompressor-lv2, iem-directionalcompressor-vst, iem-directionalcompressor-vst3,
Description: IEM Suite DirectionalCompressor (Meta-Package).
 The DirectionalCompressor is a more sophisticated Ambisonic
 compressor/limiter which lets you control the dynamics for different spatial
 regions.
 .
 This Meta-Package provides an easier way to install the
 "DirectionalCompressor" Standalone Application and LV2, VST, VST3 Plugin(s)
 from "IEM".

Package: iem-directionalcompressor-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DirectionalCompressor (Standalone Application).
 The DirectionalCompressor is a more sophisticated Ambisonic
 compressor/limiter which lets you control the dynamics for different spatial
 regions.
 .
 This package provides the "DirectionalCompressor" Standalone Application
 from "IEM".

Package: iem-directionalcompressor-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DirectionalCompressor (LV2 Plugin).
 The DirectionalCompressor is a more sophisticated Ambisonic
 compressor/limiter which lets you control the dynamics for different spatial
 regions.
 .
 This package provides the "DirectionalCompressor" LV2 Plugin from "IEM".

Package: iem-directionalcompressor-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DirectionalCompressor (VST Plugin).
 The DirectionalCompressor is a more sophisticated Ambisonic
 compressor/limiter which lets you control the dynamics for different spatial
 regions.
 .
 This package provides the "DirectionalCompressor" VST Plugin from "IEM".

Package: iem-directionalcompressor-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DirectionalCompressor (VST3 Plugin).
 The DirectionalCompressor is a more sophisticated Ambisonic
 compressor/limiter which lets you control the dynamics for different spatial
 regions.
 .
 This package provides the "DirectionalCompressor" VST3 Plugin from "IEM".

Package: iem-directivityshaper
Architecture: all
Depends: iem-directivityshaper-standalone, iem-directivityshaper-lv2, iem-directivityshaper-vst, iem-directivityshaper-vst3,
Description: IEM Suite DirectivityShaper (Meta-Package).
 This plugin let’s you filter your input signal into four independent
 bands, to which different directivity patterns can be applied to. Also the
 bands can be spatially panned.
 .
 This Meta-Package provides an easier way to install the "DirectivityShaper"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-directivityshaper-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DirectivityShaper (Standalone Application).
 This plugin let’s you filter your input signal into four independent
 bands, to which different directivity patterns can be applied to. Also the
 bands can be spatially panned.
 .
 This package provides the "DirectivityShaper" Standalone Application from
 "IEM".

Package: iem-directivityshaper-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DirectivityShaper (LV2 Plugin).
 This plugin let’s you filter your input signal into four independent
 bands, to which different directivity patterns can be applied to. Also the
 bands can be spatially panned.
 .
 This package provides the "DirectivityShaper" LV2 Plugin from "IEM".

Package: iem-directivityshaper-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DirectivityShaper (VST Plugin).
 This plugin let’s you filter your input signal into four independent
 bands, to which different directivity patterns can be applied to. Also the
 bands can be spatially panned.
 .
 This package provides the "DirectivityShaper" VST Plugin from "IEM".

Package: iem-directivityshaper-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DirectivityShaper (VST3 Plugin).
 This plugin let’s you filter your input signal into four independent
 bands, to which different directivity patterns can be applied to. Also the
 bands can be spatially panned.
 .
 This package provides the "DirectivityShaper" VST3 Plugin from "IEM".

Package: iem-distancecompensator
Architecture: all
Depends: iem-distancecompensator-standalone, iem-distancecompensator-lv2, iem-distancecompensator-vst, iem-distancecompensator-vst3,
Description: IEM Suite DistanceCompensator (Meta-Package).
 With the DistanceCompensator you can insert the distances from the listening
 position to each loudspeaker and the plug-in will calculate the needed
 delays and gains in order to compensate for distance differences.
 .
 This Meta-Package provides an easier way to install the
 "DistanceCompensator" Standalone Application and LV2, VST, VST3 Plugin(s)
 from "IEM".

Package: iem-distancecompensator-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DistanceCompensator (Standalone Application).
 With the DistanceCompensator you can insert the distances from the listening
 position to each loudspeaker and the plug-in will calculate the needed
 delays and gains in order to compensate for distance differences.
 .
 This package provides the "DistanceCompensator" Standalone Application from
 "IEM".

Package: iem-distancecompensator-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DistanceCompensator (LV2 Plugin).
 With the DistanceCompensator you can insert the distances from the listening
 position to each loudspeaker and the plug-in will calculate the needed
 delays and gains in order to compensate for distance differences.
 .
 This package provides the "DistanceCompensator" LV2 Plugin from "IEM".

Package: iem-distancecompensator-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DistanceCompensator (VST Plugin).
 With the DistanceCompensator you can insert the distances from the listening
 position to each loudspeaker and the plug-in will calculate the needed
 delays and gains in order to compensate for distance differences.
 .
 This package provides the "DistanceCompensator" VST Plugin from "IEM".

Package: iem-distancecompensator-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DistanceCompensator (VST3 Plugin).
 With the DistanceCompensator you can insert the distances from the listening
 position to each loudspeaker and the plug-in will calculate the needed
 delays and gains in order to compensate for distance differences.
 .
 This package provides the "DistanceCompensator" VST3 Plugin from "IEM".

Package: iem-dualdelay
Architecture: all
Depends: iem-dualdelay-standalone, iem-dualdelay-lv2, iem-dualdelay-vst, iem-dualdelay-vst3,
Description: IEM Suite DualDelay (Meta-Package).
 The DualDelay is the plug-in-version of our RotationalDelay we first used
 for the Al Di Meola concert. There are two delay-lines, which can be
 configured independently.
 .
 This Meta-Package provides an easier way to install the "DualDelay"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-dualdelay-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DualDelay (Standalone Application).
 The DualDelay is the plug-in-version of our RotationalDelay we first used
 for the Al Di Meola concert. There are two delay-lines, which can be
 configured independently.
 .
 This package provides the "DualDelay" Standalone Application from "IEM".

Package: iem-dualdelay-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DualDelay (LV2 Plugin).
 The DualDelay is the plug-in-version of our RotationalDelay we first used
 for the Al Di Meola concert. There are two delay-lines, which can be
 configured independently.
 .
 This package provides the "DualDelay" LV2 Plugin from "IEM".

Package: iem-dualdelay-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DualDelay (VST Plugin).
 The DualDelay is the plug-in-version of our RotationalDelay we first used
 for the Al Di Meola concert. There are two delay-lines, which can be
 configured independently.
 .
 This package provides the "DualDelay" VST Plugin from "IEM".

Package: iem-dualdelay-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite DualDelay (VST3 Plugin).
 The DualDelay is the plug-in-version of our RotationalDelay we first used
 for the Al Di Meola concert. There are two delay-lines, which can be
 configured independently.
 .
 This package provides the "DualDelay" VST3 Plugin from "IEM".

Package: iem-energyvisualizer
Architecture: all
Depends: iem-energyvisualizer-standalone, iem-energyvisualizer-lv2, iem-energyvisualizer-vst, iem-energyvisualizer-vst3,
Description: IEM Suite EnergyVisualizer (Meta-Package).
 The EnergyVisualizer visualizes the energy distribution on the sphere of
 the Ambisonic input signal using a Hammer-Aitoff projection (a spherical
 projection which is area-preserving).
 .
 This Meta-Package provides an easier way to install the "EnergyVisualizer"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-energyvisualizer-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite EnergyVisualizer (Standalone Application).
 The EnergyVisualizer visualizes the energy distribution on the sphere of
 the Ambisonic input signal using a Hammer-Aitoff projection (a spherical
 projection which is area-preserving).
 .
 This package provides the "EnergyVisualizer" Standalone Application from
 "IEM".

Package: iem-energyvisualizer-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite EnergyVisualizer (LV2 Plugin).
 The EnergyVisualizer visualizes the energy distribution on the sphere of
 the Ambisonic input signal using a Hammer-Aitoff projection (a spherical
 projection which is area-preserving).
 .
 This package provides the "EnergyVisualizer" LV2 Plugin from "IEM".

Package: iem-energyvisualizer-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite EnergyVisualizer (VST Plugin).
 The EnergyVisualizer visualizes the energy distribution on the sphere of
 the Ambisonic input signal using a Hammer-Aitoff projection (a spherical
 projection which is area-preserving).
 .
 This package provides the "EnergyVisualizer" VST Plugin from "IEM".

Package: iem-energyvisualizer-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite EnergyVisualizer (VST3 Plugin).
 The EnergyVisualizer visualizes the energy distribution on the sphere of
 the Ambisonic input signal using a Hammer-Aitoff projection (a spherical
 projection which is area-preserving).
 .
 This package provides the "EnergyVisualizer" VST3 Plugin from "IEM".

Package: iem-fdnreverb
Architecture: all
Depends: iem-fdnreverb-standalone, iem-fdnreverb-lv2, iem-fdnreverb-vst, iem-fdnreverb-vst3,
Description: IEM Suite FdnReverb (Meta-Package).
 The FdnReverb is a Feedback-Delay-Network reverberation. You can use it with
 single audio signals but also with Ambisonic signals, leading to a spatial
 and temporal diffuse reverberation.
 .
 This Meta-Package provides an easier way to install the "FdnReverb"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-fdnreverb-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite FdnReverb (Standalone Application).
 The FdnReverb is a Feedback-Delay-Network reverberation. You can use it with
 single audio signals but also with Ambisonic signals, leading to a spatial
 and temporal diffuse reverberation.
 .
 This package provides the "FdnReverb" Standalone Application from "IEM".

Package: iem-fdnreverb-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite FdnReverb (LV2 Plugin).
 The FdnReverb is a Feedback-Delay-Network reverberation. You can use it with
 single audio signals but also with Ambisonic signals, leading to a spatial
 and temporal diffuse reverberation.
 .
 This package provides the "FdnReverb" LV2 Plugin from "IEM".

Package: iem-fdnreverb-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite FdnReverb (VST Plugin).
 The FdnReverb is a Feedback-Delay-Network reverberation. You can use it with
 single audio signals but also with Ambisonic signals, leading to a spatial
 and temporal diffuse reverberation.
 .
 This package provides the "FdnReverb" VST Plugin from "IEM".

Package: iem-fdnreverb-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite FdnReverb (VST3 Plugin).
 The FdnReverb is a Feedback-Delay-Network reverberation. You can use it with
 single audio signals but also with Ambisonic signals, leading to a spatial
 and temporal diffuse reverberation.
 .
 This package provides the "FdnReverb" VST3 Plugin from "IEM".

Package: iem-granularencoder
Architecture: all
Depends: iem-granularencoder-standalone, iem-granularencoder-lv2, iem-granularencoder-vst, iem-granularencoder-vst3,
Description: IEM Suite GranularEncoder (Meta-Package).
 The GranularEncoder takes a mono or stereo input signal, and encodes short
 ‘grains’ of audio into the Ambisonic domain.
 .
 This Meta-Package provides an easier way to install the "GranularEncoder"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-granularencoder-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite GranularEncoder (Standalone Application).
 The GranularEncoder takes a mono or stereo input signal, and encodes short
 ‘grains’ of audio into the Ambisonic domain.
 .
 This package provides the "GranularEncoder" Standalone Application from
 "IEM".

Package: iem-granularencoder-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite GranularEncoder (LV2 Plugin).
 The GranularEncoder takes a mono or stereo input signal, and encodes short
 ‘grains’ of audio into the Ambisonic domain.
 .
 This package provides the "GranularEncoder" LV2 Plugin from "IEM".

Package: iem-granularencoder-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite GranularEncoder (VST Plugin).
 The GranularEncoder takes a mono or stereo input signal, and encodes short
 ‘grains’ of audio into the Ambisonic domain.
 .
 This package provides the "GranularEncoder" VST Plugin from "IEM".

Package: iem-granularencoder-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite GranularEncoder (VST3 Plugin).
 The GranularEncoder takes a mono or stereo input signal, and encodes short
 ‘grains’ of audio into the Ambisonic domain.
 .
 This package provides the "GranularEncoder" VST3 Plugin from "IEM".

Package: iem-matrixmultiplier
Architecture: all
Depends: iem-matrixmultiplier-standalone, iem-matrixmultiplier-lv2, iem-matrixmultiplier-vst, iem-matrixmultiplier-vst3,
Description: IEM Suite MatrixMultiplier (Meta-Package).
 With the MatrixMultiplier you can load a configuration which contains a
 TransformationMatrix object which will be applied to the input signal.
 .
 This Meta-Package provides an easier way to install the "MatrixMultiplier"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-matrixmultiplier-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MatrixMultiplier (Standalone Application).
 With the MatrixMultiplier you can load a configuration which contains a
 TransformationMatrix object which will be applied to the input signal.
 .
 This package provides the "MatrixMultiplier" Standalone Application from
 "IEM".

Package: iem-matrixmultiplier-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MatrixMultiplier (LV2 Plugin).
 With the MatrixMultiplier you can load a configuration which contains a
 TransformationMatrix object which will be applied to the input signal.
 .
 This package provides the "MatrixMultiplier" LV2 Plugin from "IEM".

Package: iem-matrixmultiplier-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MatrixMultiplier (VST Plugin).
 With the MatrixMultiplier you can load a configuration which contains a
 TransformationMatrix object which will be applied to the input signal.
 .
 This package provides the "MatrixMultiplier" VST Plugin from "IEM".

Package: iem-matrixmultiplier-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MatrixMultiplier (VST3 Plugin).
 With the MatrixMultiplier you can load a configuration which contains a
 TransformationMatrix object which will be applied to the input signal.
 .
 This package provides the "MatrixMultiplier" VST3 Plugin from "IEM".

Package: iem-multibandcompressor
Architecture: all
Depends: iem-multibandcompressor-standalone, iem-multibandcompressor-lv2, iem-multibandcompressor-vst, iem-multibandcompressor-vst3,
Description: IEM Suite MultiBandCompressor (Meta-Package).
 The MultiBandCompressor splits your Ambisonic signal into four bands and
 compresses them individually.
 .
 This Meta-Package provides an easier way to install the
 "MultiBandCompressor" Standalone Application and LV2, VST, VST3 Plugin(s)
 from "IEM".

Package: iem-multibandcompressor-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MultiBandCompressor (Standalone Application).
 The MultiBandCompressor splits your Ambisonic signal into four bands and
 compresses them individually.
 .
 This package provides the "MultiBandCompressor" Standalone Application from
 "IEM".

Package: iem-multibandcompressor-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MultiBandCompressor (LV2 Plugin).
 The MultiBandCompressor splits your Ambisonic signal into four bands and
 compresses them individually.
 .
 This package provides the "MultiBandCompressor" LV2 Plugin from "IEM".

Package: iem-multibandcompressor-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MultiBandCompressor (VST Plugin).
 The MultiBandCompressor splits your Ambisonic signal into four bands and
 compresses them individually.
 .
 This package provides the "MultiBandCompressor" VST Plugin from "IEM".

Package: iem-multibandcompressor-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MultiBandCompressor (VST3 Plugin).
 The MultiBandCompressor splits your Ambisonic signal into four bands and
 compresses them individually.
 .
 This package provides the "MultiBandCompressor" VST3 Plugin from "IEM".

Package: iem-multiencoder
Architecture: all
Depends: iem-multiencoder-standalone, iem-multiencoder-lv2, iem-multiencoder-vst, iem-multiencoder-vst3,
Description: IEM Suite MultiEncoder (Meta-Package).
 With the MultiEncoder you can encode multiple sources with just one plug-in.
 Select your desired number of input sources in the upper left corner (up to
 64).
 .
 This Meta-Package provides an easier way to install the "MultiEncoder"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-multiencoder-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MultiEncoder (Standalone Application).
 With the MultiEncoder you can encode multiple sources with just one plug-in.
 Select your desired number of input sources in the upper left corner (up to
 64).
 .
 This package provides the "MultiEncoder" Standalone Application from "IEM".

Package: iem-multiencoder-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MultiEncoder (LV2 Plugin).
 With the MultiEncoder you can encode multiple sources with just one plug-in.
 Select your desired number of input sources in the upper left corner (up to
 64).
 .
 This package provides the "MultiEncoder" LV2 Plugin from "IEM".

Package: iem-multiencoder-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MultiEncoder (VST Plugin).
 With the MultiEncoder you can encode multiple sources with just one plug-in.
 Select your desired number of input sources in the upper left corner (up to
 64).
 .
 This package provides the "MultiEncoder" VST Plugin from "IEM".

Package: iem-multiencoder-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MultiEncoder (VST3 Plugin).
 With the MultiEncoder you can encode multiple sources with just one plug-in.
 Select your desired number of input sources in the upper left corner (up to
 64).
 .
 This package provides the "MultiEncoder" VST3 Plugin from "IEM".

Package: iem-multieq
Architecture: all
Depends: iem-multieq-standalone, iem-multieq-lv2, iem-multieq-vst, iem-multieq-vst3,
Description: IEM Suite MultiEQ (Meta-Package).
 The MultiEQ is a simple multi-channel equalizer, filtering up to 64 audio
 channels. Each of the six filters can be switched on and of, and different
 filter types can be selected.
 .
 This Meta-Package provides an easier way to install the "MultiEQ" Standalone
 Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-multieq-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MultiEQ (Standalone Application).
 The MultiEQ is a simple multi-channel equalizer, filtering up to 64 audio
 channels. Each of the six filters can be switched on and of, and different
 filter types can be selected.
 .
 This package provides the "MultiEQ" Standalone Application from "IEM".

Package: iem-multieq-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MultiEQ (LV2 Plugin).
 The MultiEQ is a simple multi-channel equalizer, filtering up to 64 audio
 channels. Each of the six filters can be switched on and of, and different
 filter types can be selected.
 .
 This package provides the "MultiEQ" LV2 Plugin from "IEM".

Package: iem-multieq-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MultiEQ (VST Plugin).
 The MultiEQ is a simple multi-channel equalizer, filtering up to 64 audio
 channels. Each of the six filters can be switched on and of, and different
 filter types can be selected.
 .
 This package provides the "MultiEQ" VST Plugin from "IEM".

Package: iem-multieq-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite MultiEQ (VST3 Plugin).
 The MultiEQ is a simple multi-channel equalizer, filtering up to 64 audio
 channels. Each of the six filters can be switched on and of, and different
 filter types can be selected.
 .
 This package provides the "MultiEQ" VST3 Plugin from "IEM".

Package: iem-omnicompressor
Architecture: all
Depends: iem-omnicompressor-standalone, iem-omnicompressor-lv2, iem-omnicompressor-vst, iem-omnicompressor-vst3,
Description: IEM Suite OmniCompressor (Meta-Package).
 The OmniCompressor is an Ambisonic compressor which can also be used as a
 limiter. It works like a regular audio compressor.
 .
 This Meta-Package provides an easier way to install the "OmniCompressor"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-omnicompressor-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite OmniCompressor (Standalone Application).
 The OmniCompressor is an Ambisonic compressor which can also be used as a
 limiter. It works like a regular audio compressor.
 .
 This package provides the "OmniCompressor" Standalone Application from
 "IEM".

Package: iem-omnicompressor-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite OmniCompressor (LV2 Plugin).
 The OmniCompressor is an Ambisonic compressor which can also be used as a
 limiter. It works like a regular audio compressor.
 .
 This package provides the "OmniCompressor" LV2 Plugin from "IEM".

Package: iem-omnicompressor-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite OmniCompressor (VST Plugin).
 The OmniCompressor is an Ambisonic compressor which can also be used as a
 limiter. It works like a regular audio compressor.
 .
 This package provides the "OmniCompressor" VST Plugin from "IEM".

Package: iem-omnicompressor-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite OmniCompressor (VST3 Plugin).
 The OmniCompressor is an Ambisonic compressor which can also be used as a
 limiter. It works like a regular audio compressor.
 .
 This package provides the "OmniCompressor" VST3 Plugin from "IEM".

Package: iem-probedecoder
Architecture: all
Depends: iem-probedecoder-standalone, iem-probedecoder-lv2, iem-probedecoder-vst, iem-probedecoder-vst3,
Description: IEM Suite ProbeDecoder (Meta-Package).
 The ProbeDecoder is a little tool to sample/decode the Ambisonic input
 signal for one specific direction and listen to the output, mostly used for
 testing purposes.
 .
 This Meta-Package provides an easier way to install the "ProbeDecoder"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-probedecoder-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite ProbeDecoder (Standalone Application).
 The ProbeDecoder is a little tool to sample/decode the Ambisonic input
 signal for one specific direction and listen to the output, mostly used for
 testing purposes.
 .
 This package provides the "ProbeDecoder" Standalone Application from "IEM".

Package: iem-probedecoder-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite ProbeDecoder (LV2 Plugin).
 The ProbeDecoder is a little tool to sample/decode the Ambisonic input
 signal for one specific direction and listen to the output, mostly used for
 testing purposes.
 .
 This package provides the "ProbeDecoder" LV2 Plugin from "IEM".

Package: iem-probedecoder-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite ProbeDecoder (VST Plugin).
 The ProbeDecoder is a little tool to sample/decode the Ambisonic input
 signal for one specific direction and listen to the output, mostly used for
 testing purposes.
 .
 This package provides the "ProbeDecoder" VST Plugin from "IEM".

Package: iem-probedecoder-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite ProbeDecoder (VST3 Plugin).
 The ProbeDecoder is a little tool to sample/decode the Ambisonic input
 signal for one specific direction and listen to the output, mostly used for
 testing purposes.
 .
 This package provides the "ProbeDecoder" VST3 Plugin from "IEM".

Package: iem-roomencoder
Architecture: all
Depends: iem-roomencoder-standalone, iem-roomencoder-lv2, iem-roomencoder-vst, iem-roomencoder-vst3,
Description: IEM Suite RoomEncoder (Meta-Package).
 The RoomEncoder is so far the most complex and computation-intensive plug-in
 within the IEM Plug-in Suite.
 .
 This Meta-Package provides an easier way to install the "RoomEncoder"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-roomencoder-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite RoomEncoder (Standalone Application).
 The RoomEncoder is so far the most complex and computation-intensive plug-in
 within the IEM Plug-in Suite.
 .
 This package provides the "RoomEncoder" Standalone Application from "IEM".

Package: iem-roomencoder-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite RoomEncoder (LV2 Plugin).
 The RoomEncoder is so far the most complex and computation-intensive plug-in
 within the IEM Plug-in Suite.
 .
 This package provides the "RoomEncoder" LV2 Plugin from "IEM".

Package: iem-roomencoder-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite RoomEncoder (VST Plugin).
 The RoomEncoder is so far the most complex and computation-intensive plug-in
 within the IEM Plug-in Suite.
 .
 This package provides the "RoomEncoder" VST Plugin from "IEM".

Package: iem-roomencoder-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite RoomEncoder (VST3 Plugin).
 The RoomEncoder is so far the most complex and computation-intensive plug-in
 within the IEM Plug-in Suite.
 .
 This package provides the "RoomEncoder" VST3 Plugin from "IEM".

Package: iem-scenerotator
Architecture: all
Depends: iem-scenerotator-standalone, iem-scenerotator-lv2, iem-scenerotator-vst, iem-scenerotator-vst3,
Description: IEM Suite SceneRotator (Meta-Package).
 The SceneRotator is an Ambisonic rotator plug-in, which rotates the
 Ambisonic scene, hence the name.
 .
 This Meta-Package provides an easier way to install the "SceneRotator"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-scenerotator-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite SceneRotator (Standalone Application).
 The SceneRotator is an Ambisonic rotator plug-in, which rotates the
 Ambisonic scene, hence the name.
 .
 This package provides the "SceneRotator" Standalone Application from "IEM".

Package: iem-scenerotator-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite SceneRotator (LV2 Plugin).
 The SceneRotator is an Ambisonic rotator plug-in, which rotates the
 Ambisonic scene, hence the name.
 .
 This package provides the "SceneRotator" LV2 Plugin from "IEM".

Package: iem-scenerotator-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite SceneRotator (VST Plugin).
 The SceneRotator is an Ambisonic rotator plug-in, which rotates the
 Ambisonic scene, hence the name.
 .
 This package provides the "SceneRotator" VST Plugin from "IEM".

Package: iem-scenerotator-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite SceneRotator (VST3 Plugin).
 The SceneRotator is an Ambisonic rotator plug-in, which rotates the
 Ambisonic scene, hence the name.
 .
 This package provides the "SceneRotator" VST3 Plugin from "IEM".

Package: iem-simpledecoder
Architecture: all
Depends: iem-simpledecoder-standalone, iem-simpledecoder-lv2, iem-simpledecoder-vst, iem-simpledecoder-vst3,
Description: IEM Suite SimpleDecoder (Meta-Package).
 The SimpleDecoder reads JSON configuration files and decodes the Ambisonic
 input signal to loudspeaker signals. You can create these configuration
 files with the AllRADecoder.
 .
 This Meta-Package provides an easier way to install the "SimpleDecoder"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-simpledecoder-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite SimpleDecoder (Standalone Application).
 The SimpleDecoder reads JSON configuration files and decodes the Ambisonic
 input signal to loudspeaker signals. You can create these configuration
 files with the AllRADecoder.
 .
 This package provides the "SimpleDecoder" Standalone Application from "IEM".

Package: iem-simpledecoder-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite SimpleDecoder (LV2 Plugin).
 The SimpleDecoder reads JSON configuration files and decodes the Ambisonic
 input signal to loudspeaker signals. You can create these configuration
 files with the AllRADecoder.
 .
 This package provides the "SimpleDecoder" LV2 Plugin from "IEM".

Package: iem-simpledecoder-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite SimpleDecoder (VST Plugin).
 The SimpleDecoder reads JSON configuration files and decodes the Ambisonic
 input signal to loudspeaker signals. You can create these configuration
 files with the AllRADecoder.
 .
 This package provides the "SimpleDecoder" VST Plugin from "IEM".

Package: iem-simpledecoder-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite SimpleDecoder (VST3 Plugin).
 The SimpleDecoder reads JSON configuration files and decodes the Ambisonic
 input signal to loudspeaker signals. You can create these configuration
 files with the AllRADecoder.
 .
 This package provides the "SimpleDecoder" VST3 Plugin from "IEM".

Package: iem-stereoencoder
Architecture: all
Depends: iem-stereoencoder-standalone, iem-stereoencoder-lv2, iem-stereoencoder-vst, iem-stereoencoder-vst3,
Description: IEM Suite StereoEncoder (Meta-Package).
 Use the StereoEncoder plug-in to encode mono or stereo audio signals into
 the Ambisonic domain.
 .
 This Meta-Package provides an easier way to install the "StereoEncoder"
 Standalone Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-stereoencoder-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite StereoEncoder (Standalone Application).
 Use the StereoEncoder plug-in to encode mono or stereo audio signals into
 the Ambisonic domain.
 .
 This package provides the "StereoEncoder" Standalone Application from "IEM".

Package: iem-stereoencoder-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite StereoEncoder (LV2 Plugin).
 Use the StereoEncoder plug-in to encode mono or stereo audio signals into
 the Ambisonic domain.
 .
 This package provides the "StereoEncoder" LV2 Plugin from "IEM".

Package: iem-stereoencoder-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite StereoEncoder (VST Plugin).
 Use the StereoEncoder plug-in to encode mono or stereo audio signals into
 the Ambisonic domain.
 .
 This package provides the "StereoEncoder" VST Plugin from "IEM".

Package: iem-stereoencoder-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite StereoEncoder (VST3 Plugin).
 Use the StereoEncoder plug-in to encode mono or stereo audio signals into
 the Ambisonic domain.
 .
 This package provides the "StereoEncoder" VST3 Plugin from "IEM".

Package: iem-toolbox
Architecture: all
Depends: iem-toolbox-standalone, iem-toolbox-lv2, iem-toolbox-vst, iem-toolbox-vst3,
Description: IEM Suite ToolBox (Meta-Package).
 This is a small plug-in with a growing set of handy features. For now, you
 can flip the Ambisonic input signal along the x, y and/or z axis.
 .
 This Meta-Package provides an easier way to install the "ToolBox" Standalone
 Application and LV2, VST, VST3 Plugin(s) from "IEM".

Package: iem-toolbox-standalone
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite ToolBox (Standalone Application).
 This is a small plug-in with a growing set of handy features. For now, you
 can flip the Ambisonic input signal along the x, y and/or z axis.
 .
 This package provides the "ToolBox" Standalone Application from "IEM".

Package: iem-toolbox-lv2
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite ToolBox (LV2 Plugin).
 This is a small plug-in with a growing set of handy features. For now, you
 can flip the Ambisonic input signal along the x, y and/or z axis.
 .
 This package provides the "ToolBox" LV2 Plugin from "IEM".

Package: iem-toolbox-vst
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite ToolBox (VST Plugin).
 This is a small plug-in with a growing set of handy features. For now, you
 can flip the Ambisonic input signal along the x, y and/or z axis.
 .
 This package provides the "ToolBox" VST Plugin from "IEM".

Package: iem-toolbox-vst3
Architecture: any
Depends: ${shlibs:Depends}, ${misc:Depends},
Description: IEM Suite ToolBox (VST3 Plugin).
 This is a small plug-in with a growing set of handy features. For now, you
 can flip the Ambisonic input signal along the x, y and/or z axis.
 .
 This package provides the "ToolBox" VST3 Plugin from "IEM".

