Release Notes

2.2.27:

Framework:

- [Imp] BUG-10482 Page Up, Page Down, Home and End move the selection in lists
        and trees, such as the patch manager and the Xenia wave editor.

JE8086:

- [Fix] MIDI was received and sent at half the speed of the hardware, so dense
        MIDI, a chord or a fast controller movement for example, arrived late.

88emuPlayer:

- [New] Devices: Added support for the SK-88Pro.

- [Imp] Settings: "Hide devices without ROMs" leaves the boards whose ROMs are
        missing out of the device menu. Off by default. Every board stays
        listed while no ROM set is complete at all.

Plugin Manager:

- [Fix] Installing a download that holds nothing to install, as the Standalone
        builds did, said it worked while nothing was installed. It fails and says
        so now.

- [Fix] A long run of installs no longer fails halfway when the server asks it to
        slow down. It waits as long as the server says, or up to two minutes, and
        carries on. A download that stops half way is tried once more.

- [Imp] Fewer requests to the server on every refresh and every install.

- [Fix] Donator builds come from a new server,
        builds.theusualsuspects.io. The old one stopped answering after a long run of
        downloads, so a run of installs failed halfway. Links to donator folders from
        older download posts still work when pasted as a login.

- [Imp] EMU-248 Nothing is ticked on a first start, so a first "Install selected"
        no longer installs every format of every product. What you tick is still
        remembered. "Upgrade all" upgrades everything installed that has an
        update, ticked or not.

- [Fix] EMU-249 The window opens inside the part of the screen the taskbar leaves
        free, instead of reaching behind it on smaller screens.

- [New] EMU-250 Products with an update are listed first, under "Updates
        available", and go back to their category once they are upgraded.

- [Imp] EMU-251 The button that updates the Plugin Manager itself says that it is
        the Plugin Manager, and says when what is on offer is a newer build of the
        same version.

2.2.26:

Framework:

- [Fix] EMU-103 The latency the plugins report to the host left out the delay
        of the resampler, so notes came late: by up to 5 ms with Mame HQ, the
        default, and by less with Legacy. That delay is now measured for each
        resampler setting and reported, so all settings line up. Osirus and
        JE8086 keep their timing with Legacy.

- [Fix] BUG-10393 Parts of the user interface, the input level meters for
        example, stopped updating after the plugin window was closed and
        reopened.

- [Fix] BUG-10407 A parameter that was set to -1 ignored the next change made to
        it in the editor, only the change after that reached the device.

- [Fix] BUG-10391 macOS: The first click into the plugin window did nothing when the
        window was not active yet, only the second one reached the editor.

- [Fix] BUG-10419 While a knob or slider was dragged, tabs and buttons that the
        mouse passed over lit up as if they were hovered.

- [Fix] The mouse wheel over a knob or slider that sits in a scrollable area
        changed its value and scrolled the area at the same time.

- [Fix] BUG-10380 macOS: audio dropouts at small buffer sizes, which got worse
        with macOS 27. The emulation now joins the audio workgroup of the host,
        so Apple Silicon keeps it on the performance cores together with the
        host's own audio processing.

- [Fix] Saving or loading a state while audio was playing could, rarely, crash
        the plugin or save or restore a damaged state, because the emulation
        kept processing audio at the same time. The periodic state backup of
        the DSPBridge server had the same problem.

- [Imp] MCP server: `input_play` feeds an audio file into the audio inputs of
        the plugin and `input_stop` ends it, to test effects and audio inputs
        together with `record_start` and `record_stop`.

- [Imp] MCP server: `read_lcd` returns the text and the LEDs of the display of
        the emulated device, also while the plugin window is closed.

- [Fix] MCP server: A request sent as soon as a plugin appeared in the discovery
        file could hang or crash the host, because the server started before
        the plugin was fully loaded. A request that came in while the plugin
        was removed could crash the host, too. The server now starts once
        loading is done and stops before anything else is removed.

- [Imp] BUG-10220 The Esc key no longer opens the settings page, it is left to
        the host, which uses it to close the plugin window, for example. Esc
        still closes the settings page and ends MIDI Learn mode. The settings
        open from the context menu.

- [Fix] Windows: the plugin files reported version 2.2.14 in their file
        properties no matter which release they were from.

- [Imp] EMU-170 DSPBridge: When the plugin searches the network for a server
        and only finds one with another bridge protocol version, it now says
        so, and that the server and the plugins need to be updated together,
        instead of reporting that no server was found.

- [Imp] DSPBridge: The interface between the plugins and DSPBridgeServer changed
        in this version, and with it the bridge protocol version: update
        DSPBridgeServer together with the plugins. A server of 2.2.25 does not
        load plugins of this version, which would have crashed it, and this
        server does not load plugins of 2.2.25 or older.

- [Fix] BUG-10437 Windows: The "Open skins folder in File Browser" button in the
        settings crashed the host if the folder could not be created, for
        example when the path to the Documents folder contains characters such
        as umlauts. The same applied to exporting a skin and to the "Browse..."
        button for MIDI Learn presets.

- [Fix] BUG-10335 VST3 in Cubase: Loading a patch sometimes changed some of its
        parameters right after it was loaded, so the patch sounded wrong until
        it was loaded again. Soft knobs, such as the knobs below the display of
        Xenia, passed values of the previous patch to the parameters that the
        new patch assigns to them.

- [Fix] BUG-10217 Linux: Products with more than one DSP could crash, rarely,
        most often while they were loaded or removed. Building the LV2 plugin
        crashed for the same reason if a ROM was installed.

- [Fix] BUG-10464 Linux: A note played with the computer keyboard of the host,
        for example in Bitwig Studio, was triggered again and again at the key
        repeat rate while the key was held, once the plugin window had the
        keyboard focus.

- [Fix] BUG-10425 Program changes for a MIDI bank that has a data source in the
        Patch Manager loaded their patch late, so controllers sent right after
        a program change applied to the previous patch. The patch now loads
        right away, in order with the MIDI around it, and of several program
        changes in a row only the last one loads. These program changes now
        also work when the plugin window was never opened, and loading a
        project shows its patches in the Patch Manager when the project is
        loaded into a plugin that is already running.

- [New] Skins can draw lines with a <strokes> element. A skin script gives it
        its lines with Element.As.Strokes(element):setStrokes(lines), one
        table of {x, y} points per line, in dp. The properties color,
        stroke-width, stroke-outline-width and stroke-outline-color style
        them.

- [Fix] Skins: The error message for a wrong argument to a canvas method in a
        skin script named the argument before it, or "bad self" for the first
        one.

- [Fix] DSPBridge: The tcpPort setting of the server had no effect, the server
        always used port 56362.

- [Imp] Ctrl and the mouse wheel, or Ctrl and + and -, change the GUI scale
        in the steps of the GUI Scale menu, Cmd on macOS. A control under the
        mouse that takes the wheel itself keeps it. The GUI Scale menu offers
        400% now, as the settings do.

- [Fix] Ctrl+V in a text field, the patch name for example, could replace the
        current patch with one copied to the clipboard. Ctrl+C and Ctrl+V copy
        and paste the whole patch only when nothing under the mouse or with the
        focus takes them itself.

- [Imp] EMU-78 A tooltip shows the value of the control under the mouse in every
        skin now, also in those that had none so far: Osirus, OsTIrus, JE8086 and
        the Vavra front panel. It can be turned off in the Skins settings.

- [Imp] EMU-85 Displays and other canvases, skin canvases included, update their
        texture in place when their content changes, instead of creating a new
        one each time. That saves memory traffic and graphics driver work while
        a display changes, with OpenGL, Metal and the software renderer.

- [Fix] The lock, link and MIDI Learn icons of a control could stay behind on
        the skin after the control was removed or its page rebuilt, and
        clicking such an icon could crash the plugin.

- [Fix] Loading a state, a project or a preset of the host for example, while
        edits from the editor or the host were still on their way to the
        emulation could apply those edits on top of the loaded sound.

- [Fix] MIDI that an emulated device sent with running status, as the CM-32P
        does, came out as single stray bytes after its first message.

- [Fix] Instruments that receive MIDI at the speed of a hardware MIDI cable,
        JE8086 and the 88emu boards for example, often lost the first note of a
        loop in the host, or cut it off right after it started. A host that
        does not end its audio block at the loop end reports the jump back only
        with the next block, so the first notes of the new pass were taken for
        leftovers of the old one and silenced with them. The loop the host
        reports now places the jump on the sample it happens at.

- [Fix] When the connection to the DSPBridge server was lost, the plugin
        reconnected, or switched to local processing, on the host's audio
        thread, so the host's audio stalled until that was done. It happens in
        the background now, and the plugin stays silent until then.

- [Fix] MIDI Learn, the MIDI output and parameter changes could get in each
        other's way across the host's audio and MIDI threads. That could crash
        the plugin, rarely, for example when a mapping was learned or a project
        was loaded while MIDI was arriving, or when the plugin was removed.

- [Imp] A MIDI output port that sends slower than the plugin feeds it no longer
        holds up the audio. Messages that do not fit into its queue are dropped.

- [Fix] BUG-10481 A plugin closed while its patch manager was still loading,
        which a host also does while it scans plugins, could save a patch
        manager cache without the user's banks and data sources. From then on
        the patch manager showed them empty, until the file
        patchmanagerdb.cache was deleted. A cache that is broken this way still
        has to be deleted once.

- [Fix] Text in a style that the font of a skin does not have, italic for
        example, was not drawn at all. In a skin whose font has no italic
        face, the counts in the patch manager, the "Search..." hints of the
        search fields and the headlines of the settings pages were missing.
        Such text now uses the closest face the font has.

Osirus/OsTIrus:

- [Fix] EMU-243 A file of less than 16 bytes, dropped onto a part or imported
        into the Patch Manager, crashed the host. It is now refused like any
        other file that holds no patch.

- [Fix] BUG-10425 Controllers and parameter changes that arrived while a patch
        was being loaded, for example right after a program change, could get
        lost, in the sound or in the state saved with the project, with or
        without the Patch Manager.

- [Fix] BUG-10425 A MIDI bank number given to a RAM bank in the Patch Manager
        got lost whenever the RAM banks were received again, after loading a
        project for example.

- [Fix] BUG-10215 BUG-10225 A state that the host saved right after loading one,
        or right after the plugin was created, before any audio had been
        processed, contained no sounds at all, and recalling it left the plugin
        as it was. Logic Pro saves projects and plug-in settings at such
        moments, and Reaper does not process a bypassed plugin at all. Instead,
        the plugin sent a dump of all its banks to its MIDI output a moment
        later. Settings saved with an older version need to be saved again.

- [Fix] EMU-161 Certain short SysEx messages from the host or a MIDI input could
        crash the plugin.

- [Fix] BUG-10309 Galaxpel and TrancyTI skins: While filter 1 is in one of the
        Analog modes, Saturation shows "Analog Overdrive" and cannot be changed,
        as in Virus Control. In these modes the Virus ignores the saturation
        type and uses the saturation of its analog filter instead.

- [Imp] BUG-10194 A MASTER TUNE knob tunes the whole instrument, by up to about
        half a semitone up or down, and is saved with the project. The Galaxpel
        skin has it next to PURE TUNING on the ARP | SETTINGS page, the TrancyTI
        skin next to MASTER VOLUME on the COMMON page.

- [Fix] BUG-10306 In Single mode, parameter changes that the plugin sent to its
        MIDI output were addressed to the first part of a Multi instead of the
        Single, so a hardware Virus controlled by the plugin ignored them.
        Patch changes and Multi mode were not affected.

- [Fix] EMU-82 Loading a project told the host that Master Volume, Master Tune,
        MIDI Channel and Device ID had been edited. Ableton Live then turned off
        their automation and switched the track's automation lane to Master
        Tune.

- [Fix] EMU-224 Importing a damaged or modified Virus OS update into the Patch
        Manager could hang it when a preset name contained an unusual character.

- [Fix] EMU-239 MIDI or SysEx that arrived in a burst, for example the
        controllers a DAW sends when playback starts or many parameter changes
        at once, could partly get lost or garble the notes behind it.

- [Fix] EMU-207 The ROM selector kept showing the previous ROM after loading a
        project that uses another one. Switching the ROM reset the DSP clock
        to 100%. A ROM that failed to start stayed selected and was saved with
        the project while the previous one kept running.

Osirus:

- [Fix] BUG-10410 Galaxpel skin: The link button on the right of the filter
        section did nothing. It now selects both filters, as pressing both
        filter SELECT buttons does on the Virus: Resonance, Env Amount and
        Keytrack of the two filters move together, and the setting is saved
        with the patch.

- [Fix] BUG-10305 Galaxpel skin: With the filter link on, the Env Amount
        Velocity and Resonance Velocity knobs of the two filters move together,
        in the filter section and on the ARP page. Before, only Filter 1's Env
        Amount Velocity moved Filter 2's.

- [Fix] EMU-228 Switching to another ROM lost the MIDI bank numbers given to the
        ROM banks in the Patch Manager. Each ROM now keeps its own, also when
        switching back and after reloading.

- [Fix] A new instance without a loaded project or patch played no sound until
        a patch was loaded or a parameter changed.

OsTIrus:

- [Fix] BUG-10420 Audio fed into the input did not come through anymore, neither
        in OsTIrusFX nor with Input Mode Static or Dynamic in OsTIrus.

- [Fix] BUG-10432 TrancyTI skin: FM Mode is greyed out while Oscillator 2 is set
        to HyperSaw, which has no FM, as on the Virus TI.

- [Fix] BUG-10410 TrancyTI skin: The FILTER LINK button was always off after
        loading a patch, also for patches that have it on, such as -INIT-, and
        switching it was not saved with the patch. It now works like FILTER
        LINK in Virus Control and like both filter SELECT buttons on the
        hardware.

- [Imp] EMU-238 Notes play exactly at the sample the host sends them for, as on
        a Virus TI connected via USB, instead of on a grid of 64 samples (up to
        1.45 ms late) as through its MIDI port. The MIDI latency is constant
        now and reported exactly to the host.

- [Fix] EMU-240 In Multi mode, a note could get lost when one of the two DSPs
        was busy. The DSP then hands the note over to the other one, which did
        not receive it, because the two DSPs did not talk to each other. They
        now do, as on the hardware, and parts on the second DSP no longer play
        two samples ahead of the others.

- [Fix] EMU-244 The audio input had left and right swapped in single mode, in
        OsTIrusFX and for parts 1, 3, 5 and so on of a multi. Parts 2, 4, 6
        and so on got one wrong input sample at the start of every block the
        host processes.

- [Imp] MIDI the DSP sends other than SysEx, the notes of the arpeggiator with
        MIDI Arpeggiator Send on for example, reaches the MIDI output now, also
        for parts on the second DSP. It was dropped before. Parameter changes
        echoed as controllers stay internal, as with Virus Control.

Vavra/Xenia:

- [Fix] EMU-168 SysEx from the host or a MIDI input could be mistaken for a
        display or LED update from the emulated device. It then showed up on
        the display and the LEDs, and a short message could crash the plugin.

- [Fix] EMU-213 A SysEx global parameter change with an out-of-range parameter
        number, from the host or a MIDI input, overwrote memory of the plugin
        and could crash it.

- [Fix] EMU-234 A SysEx parameter change or parameter request with an
        out-of-range parameter number, from the host or a MIDI input, could
        crash the plugin or damage the global settings saved with the project.

- [Fix] BUG-10196 A sound that was loaded or edited while the host did not
        process the plugin, for example in a Poly Grid FX slot in Bitwig, was
        not saved with the project until audio had been processed. The
        project came back with the sound from before, for a new instance the
        init sound.

- [Fix] BUG-10440 The plugin hung for good when one audio block brought
        more than 16384 MIDI events, which a host that sets every parameter
        when it loads a plugin can send. The events now follow over the next
        blocks, none is lost.

- [Fix] When the computer was busy, notes and MIDI clock could reach the
        emulated synthesizer up to several hundred milliseconds late, notes
        could get lost, and LFOs synced to MIDI clock ran at the wrong speed.

Vavra:

- [Fix] The audio input had its left and right channels swapped, one of them
        arrived a sample late, and one channel had a glitch every 16 samples.

- [Fix] EMU-162 The emulation could write memory dumps into the working folder
        of the host, and crashed the host if it could not write there.

- [Fix] The first turn of an encoder of the front panel skin moved the value by
        several steps at once.

Xenia:

- [Fix] Storing sounds could, rarely, make the emulation write past the end of
        its display memory.

- [Imp] EMU-166 When no ROM is found, the message now says which files are
        needed: the full ROM as one 256 KB .bin file, or its two halves as two
        128 KB .bin files.

- [Fix] EMU-235 Removing the plugin or closing a project could, rarely, crash
        the host while the emulation was still busy with MIDI it had received.

- [Fix] EMU-226 Without the plugin window open, a patch with its own user
        wavetable and user waves loaded without them, for example through a
        program change, and one saved to the Patch Manager lost them.

NodalRed2x:

- [Fix] BUG-10440 The plugin hung for good when one audio block brought
        more than 16384 MIDI events, as Vavra and Xenia did.

- [Fix] BUG-10400 A state that the host saved after loading one, before any
        audio had been processed, contained the sounds from before the load.
        Logic Pro does that with projects and plug-in settings, so recalling
        them later brought back the previous sounds. Settings saved with an
        older version keep the wrong sounds and need to be saved again.

- [Fix] BUG-10446 The emulation ran 0.1 % slower than the hardware, so it
        played 1.8 cents flat. The Nord Lead 2X runs at 98,304 Hz, not at
        98,200 Hz. Tuning and everything time-based, LFOs, envelopes and the
        arpeggiator, now match the hardware.

- [Imp] BUG-10445 BUG-10216 A PANIC button below the page tabs does what
        SHIFT + DISTORTION does on the hardware: every note stops, also held
        and sustained ones. The Nord Lead 2X ignores the MIDI messages All
        Notes Off and All Sound Off, and so does the emulation, so this is
        the way to stop notes that hang.

- [Imp] BUG-10445 A HOLD button in the arpeggiator section turns Arpeggio
        Hold of the current part on and off, as SHIFT + ARP does on the
        hardware, and its LED lights up while it is on. As on the hardware,
        Hold is not part of a patch and is not saved, and Panic ends it.

- [Imp] EMU-61 Lower CPU load: the two DSPs of the emulation now run side by
        side instead of one waiting for the other's output.

JE8086:

- [New] JP-8080 support. It needs a complete 1 MB flash dump of the JP-8080,
        the firmware in its update .mid files is not enough to boot. Pick it
        in the ROM dropdown at the bottom of the window, which now switches
        between all ROMs that were found.

- [New] JP-8080: The audio inputs reach the Voice Modulator and OSC 2 EXT, the
        left input is INST/LOWER, the right one VOCAL/UPPER. The two EXT IN
        knobs set their levels, and the Voice Modulator page edits all of its
        settings.

- [New] JE8086FX, an FX version, to use the Voice Modulator of the JP-8080 on
        audio tracks.

- [Imp] Considerably lower CPU usage, the emulation of the DSP chips got a lot
        faster.

- [Fix] The first notes could start late when the host sent MIDI tuning data
        ahead of them, they had to wait until all of it was received. The
        JP-8000 does not support MIDI tuning, the data is now ignored.

- [Fix] EMU-164 Dragging a file onto a part name crashed the plugin. Dropping a
        file with one patch onto a part name now loads it into that part.

- [Fix] EMU-165 The first start, while the Patch Manager had no database yet,
        deleted *.cache files directly in the AppData folder (Windows) or the
        Library folder (macOS) and copied *.json and *.syx files from there
        into the Patch Manager folder.

- [Fix] EMU-167 With a plugin latency above zero, a click on a panel button
        reached the emulation at a random moment instead of in order with the
        notes played around it.

- [Imp] The master volume is saved in a new format. Projects of older versions
        load as before, a project saved with this version opens in an older
        version with the master volume at 100%.

- [Fix] BUG-10307 Dense controller data from the host, automation for example,
        delayed the notes played along with it by seconds, and the delay kept
        growing. Controllers are now thinned to what a hardware controller
        sends, the latest value always arriving, so the notes stay on time.

- [Fix] EMU-178 With the DSPBridge, the server ran the first ROM found instead of
        the keyboard ROM the plugin uses itself, so a rack ROM could run
        remotely while the plugin expected a keyboard.

- [Fix] Host automation and the device's replies could change the plugin's copy
        of the current sound at the same time, which could crash the plugin,
        rarely. At startup the Patch Manager could also read its list of ROM
        banks while it was still being filled.

- [Fix] The performances of a rack ROM read one byte past their common block as
        its last parameter, the vocal upper input jack, which could leave it at
        a random value.

88emuPlayer:

- [New] 88EmuCli: `--video` renders a song to an h264/AAC video showing the
        player's window - front panel, display, level meters and playlist -
        alongside its audio. Offline and deterministic like the WAV render, with
        `--fps`, `--video-scale` and `--video-size` to pick the format. Requires
        ffmpeg, which is not shipped with the player.

- [New] Devices: Added support for the MT-32, CM-32L and CM-64 (experimental).

- [New] GM2 reset: "Send GM2 Reset" in the context menu, and GM2 as a choice
        for the reset before each song (`--reset gm2` on the command line).

- [Fix] SC-88VL, SC-88Pro: GM System On was ignored, so a GM reset before a
        song, from the context menu or from the song itself left every part
        as the previous song had set it. Universal Master Volume was ignored
        as well.

- [Fix] MIDI Player: The player no longer quits without a word at startup when a
        file of the last playlist cannot be read. Such an entry keeps its place,
        shown in red, and is skipped when playing. Clicking it tries again and
        says why it fails. Loading a playlist works the same way instead of
        refusing the whole playlist.

- [Fix] 88EmuCli: `--video` could not start ffmpeg on Windows, and failed
        with file paths containing non-ASCII characters.

- [Fix] MIDI Player: RCP loops repeated 127 times or more were played only
        twice, so a track that waits out a long intro with a loop started too
        early. Only a loop that would add thousands of beats is
        still shortened.

- [New] MIDI Player: Karaoke .kar files can be played, dropped onto the playlist
        and rendered with 88EmuCli like any other MIDI file.

- [Imp] MIDI Player: When the player cannot start and was not started from a
        terminal, it shows the reason in a message box.

- [Imp] ROMs: When macOS does not let the player read its ROM folder, it says
        so and explains how to allow it, instead of reporting every ROM as
        missing.

- [Imp] SC-8820: The original dump of the CPU's internal ROM, R02015367, is
        recognized and used in place of the reconstructed one, which still
        works. The CPU is now emulated as the SH7016 it is, so the internal
        ROM is 64 KiB. A 128 KiB dump that holds it twice is recognized too;
        any other 128 KiB sc8820_internal.bin is no longer accepted.

- [Fix] MT-32, CM-32L, CM-32P, CM-64: A song whose tracks are on its second
        MIDI port, as some sequencers saved MT-32 music, stayed silent. Every
        port now reaches the board's one MIDI IN, as on the Sound Canvas.

- [Fix] SC-88, SC-88Pro: SysEx parameters in the 08 and 0C address blocks were
        ignored, among them F0 41 10 42 12 0C 20 04 01 4F F7, which switches
        the SC-88Pro into its SC-88 mode the way SELECT+ALL does.

- [Fix] SC-88 family, SC-8820, SC-8850, NU-10B, MIIG5: A few calculations in
        the XP sound chip relied on behaviour that C++ leaves undefined, which
        an optimising compiler is free to break. The sound does not change.

- [Fix] SC-55 and SC-88 families: When the firmware switched the CPU's A/D
        converter to another group of inputs while a scan was running, the
        converter could stop reporting conversions.

- [Fix] MT-32, CM-32L, CM-32P, CM-64: The CPU's add and subtract with carry
        set the zero flag the way the real chip does, from the result of
        each word, rather than as the manual describes it.

- [Fix] SC-8850, MIIG5: Linking the two XP sound chips could make the audio
        thread wait for a compile worker thread to stop.

- [Fix] The player could crash, rarely, when the device was switched or
        powered on or off, and right after the VALUE knob was pushed on the
        SC-8850, because the window was changed while it was being drawn.

- [Fix] Linux: The player could crash after a device switch while the audio
        or MIDI settings were open: the settings page that was replaced
        stayed registered with the window for its redraws.

- [Fix] SC-88, SC-88VL, SC-88Pro: A data request (RQ1) was never answered.
        The firmware now answers it as on the hardware, for a request that
        starts at a parameter, up to 137 bytes, on either MIDI IN.

- [New] Part Editor, from the context menu or with a double-click on the
        display, for the Sound Canvases from the SC-55 to the SC-8850, the
        boards that run their programs, and the MT-32, CM-32L, CM-32LN, CM-32P
        and CM-64. A mixer with every part's volume, pan and sound, with solo
        and mute on the Sound Canvases, beside the system and effect settings,
        and a page per part with its settings beside the instruments, drum
        sets, timbres or tones to pick from, named from the board's own ROMs.
        Picking one plays a note on the part while the mouse button is down.
        On the LA boards a part's page also edits its timbre, partial by
        partial, with the envelopes drawn, and the rhythm part's page each
        key. Edits reach the board as they are made, and the window follows
        what songs and live input set; a part lights up while MIDI for it
        comes in. Its menu sends the parts or everything to the board,
        receives them back from a board that answers data requests, and saves
        them as a MIDI file that drags onto a track of a host.

- [Imp] CM-32L, CM-32LN, CM-32P, CM-64: A volume knob that matches the bezel.

- [Imp] MT-32: Its own dark artwork instead of the CM-32L's.

- [New] Devices: Added the MV-30 (experimental). Its operating system loads
        from the system disk image, which is part of the ROM set (system
        disks 1.08 and 1.091); the player runs that boot at full speed while
        the device loads. Card slot A takes the same PCM cards as the
        CM-32P. Writing to the disk, the metronome, the tape sync and the
        analog output stage are not emulated yet.

Plugin Manager:

- [New] A program that installs and updates the plugins for you, so that keeping
        them current no longer means downloading archives and unpacking them into
        the right folders by hand. It lists every product with a column per plugin
        format, showing which version is installed and offering every version you
        could have instead - one format at a time, a whole product at once, or
        everything on the page. The effect builds come with the plugin they belong
        to when you ask for them.

- [New] Plugins that are already installed are found where they are, not only in the
        folder this program would put them in: the places each format is normally
        kept are searched too, which on macOS is the system Library and on Linux
        the /usr tree. A first start offers an upgrade of the build you have rather
        than a download of the one you are already running, and that upgrade
        replaces the copy it found instead of leaving a second one behind in
        another folder a host scans.

- [Fix] A plugin unpacked by hand in a format that does not say its version, such
        as a CLAP on Windows, was only ever offered a reinstall. It is offered an
        upgrade now when its file is clearly older than the build on offer.

- [Fix] A Plugin Manager unpacked by hand, which the first install always is, was
        never offered a newer build of its own version. It is now when its file is
        clearly older than that build.

- [Fix] Installing a plugin whose own name ends in FX left an empty folder in
        Documents/The Usual Suspects, named after the rest of its name. Only an
        effect build of a plugin shares that plugin's folder now.

- [Fix] macOS: installing over a plugin that was already there could stop the host
        from loading it at all - in Logic the plugin simply disappeared from the list.
        A plugin on macOS is a sealed bundle, and the update was leaving a file in it
        that the signature does not cover, which is enough for the system to refuse
        the whole plugin. The bundle is now put in place exactly as it was built, and
        a ROM you had kept inside it is moved to the product's roms folder in
        Documents, where the plugin looks for it anyway.

- [Fix] Plugins kept in a folder of their own inside the plugin folder - a
        VST3\The Usual Suspects\ and the like - are found now. They read as not
        installed before, so every one of them was offered as a download, and an
        install put a second copy in the folder above. The search goes all the way
        down, and an upgrade lands on the copy it found.

- [Fix] The stored logins are no longer sitting in the settings file for anyone to read.
        The file was written with the usual permissions, which on macOS and Linux means
        every account on the machine could read it, and the passwords were in it as
        typed. It is now readable by you alone and the passwords are scrambled in it.
        A file from an older version is read as it is and tidied up the next time a
        login is saved, so nothing has to be entered again.

- [Fix] The window no longer stops responding for a minute or more after it opens.
        Finding out which version of an installed LV2 plugin is on disk read a
        file of up to 17 MB one byte at a time, for every plugin, on the thread
        that draws the window. It now opens straight away.

- [Fix] A donator folder can be given as the link from the download post, not only
        as its name. Pasting the link used to build a web address that could not
        work, so the login was refused.

- [Fix] tuspm: adding a donator login with "tuspm login donators" also stored it as
        the team login, replacing the one that was there.

- [Fix] Removing plugins from a folder that needs administrator rights asks for them
        once. It used to ask for every file it removed - the plugin and the changelog
        beside it, in every format, for the plugin and for its effect build.

- [Fix] Declining the administrator prompt during an update no longer counts as an
        update that worked. The new version was written down as installed while the
        old one was still on disk, so the update was never offered again.

- [New] A donator login adds the builds for the products you support to the list.

- [New] tuspm, the same program without a window, for a script or a build machine.

- [New] EMU-153 BUG-10468 The changelog of every product is in the Plugin Manager:
        Changelog on a product's page lists every released version, and for the one
        picked shows what changed in the product apart from what changed for every
        product. A version can be copied as text or as Markdown, and
        "tuspm changelog" writes it to a file. Donator builds bring the changelog of
        their own build, so it is there before it is public.

- [New] A product can bring files besides its plugins - presets, skins and the like -
        which are put into its folder in Documents when it is installed. A file that
        is there already is only replaced when a newer one is published, so changes
        made to it are kept.

- [New] A product you have no use for can be taken out of the list: right-click it
        and choose Hide. Right-click anywhere in the list to bring back everything
        that is hidden. How many are is written next to the number of plugins, so a
        short list never looks like a list with something missing from it.

2.2.25:

88emuPlayer:

- [Fix] MIDI Player: Loading a MIDI file whose SysEx or Meta event is cut short
        by the end of the file, or by a track chunk that is shorter than its
        contents, no longer reads past the data or terminates the player.

- [Fix] ROMs: Make the VEGS-Pro support the SC-88Pro waveroms as well.

2.2.24:

Framework:

- [Fix] The patch manager could hang the interface for minutes on folders
        with tens of thousands of patch files.

- [Fix] DSPBridge: The server took the port of its UDP connection from the
        TCP port setting.

- [Fix] DSPBridge: When a device did not start on the server, the connection
        hung. The server now refuses the device instead.

Osirus:

- [Imp] The part list now shows per-part MIDI activity indicators, same as
        OsTIrus.

88emuPlayer:

- [Fix] MIDI: Deliver System DT1 messages to the SC-88, SC-88VL and SC-88Pro
        firmware, restoring per-part `CHANNEL MSG RX PORT` assignments and
        System Mode Set. Individual parts can layer from the same MIDI input.

2.2.23:

88emuPlayer:

- [New] MIDI Player: The standalone now restores the last playlist automatically.
        Right-click the playlist to load or save portable `.m3u` / `.m3u8`
        playlist files, or add/drop one to append its entries.

- [Fix] MIDI Player: Prevent shortened opening notes in songs with dense
        initial instrument setup. Send safe opening setup ahead of playback
        and let cleanup finish even when the per-song reset is off.

- [Fix] MIDI Player: Recomposer RCP Track Exclusive messages now read their
        SysEx payload from F7 continuation records, so SC-88Pro setup data is
        no longer prefixed with invalid bytes and discarded.

- [Imp] MIDI: Command-line MIDI input options can now assign inputs to
        groups A-D with `--midi-in-a` through `--midi-in-d`. `--midi-in`
        remains the group-A shorthand.

- [Imp] UI: The CM-32P PCM card image can be chosen in the settings and is
        remembered, instead of only through the --pcm-card launch option.

- [Fix] Devices: The front-panel POWER switch and Q shortcut now use standby
        on the SC-55, SC-55mkII, SC-155, SC-155mkII and SC-88VL.

- [New] Devices: Added experimental support for NU-10B and MIIG5 (GM mode only).

2.2.22:

88emuPlayer:

- [Imp] UI: The Settings panel has now a more readable font size.

- [Fix] UI: Restore the standard window border color.

- [Fix] UI: Correct the SC-88Pro USER INST / EFX indicator to display green,
        red or amber according to the front-panel LED controls.

- [Imp] Devices: The PWM-controlled VCA in the CM-32P is now modelled.

- [Fix] Devices: LP chip emulation was using a wrong scaling factor that was
        affecting the total output volume.

- [Fix] Audio: Avoid waiting for the user interface when processing front-panel
        input and updating the display from the audio thread.

- [Fix] MIDI: Preserve outgoing MIDI timing within audio blocks, including when
        analog output emulation uses oversampling.

- [Fix] MIDI Player: Clear sustained and releasing notes on transport changes
        even after an All Notes Off message.

- [Fix] MIDI Player: Wait longer after the per-song reset before starting the
        song. The previous pause was shorter than the reset itself takes to
        reach the device, so songs that set up every part on their first tick
        lost the notes at their start.

- [Fix] macOS: Restore software rendering when Metal initialization fails,
        removing the native Metal view that could leave the window black.

- [Fix] macOS: Support GPUs requiring 4x instead of 2x Metal antialiasing and
        correct Metal texture transfers and unsupported OpenGL calls.

- [Fix] macOS: Release Metal resources when closing or recreating the interface
        to prevent graphics memory usage from growing.

- [Imp] ROMs: Added support for the SC-88Pro correct wave set as 5 separate chips.

2.2.21:

Framework:

- [Fix] BUG-10355 After switching to another ROM, the patch manager could keep
        offering the presets of the previous ROM, taken from its cache, instead
        of the ones of the ROM that is loaded. Tags, favourites, renames and
        MIDI bank numbers of ROM presets and banks are kept.

- [Fix] BUG-10323 Plugin windows could open at their smallest possible size
        and stay that small every time they were opened again. When a host,
        the window manager or a display change asked for a smaller window
        than that, the result was remembered as the chosen scale. It no
        longer is, and a window that was saved that small opens at 100%.

- [Imp] BUG-10322 The skin canvas supports more of the HTML5 2D drawing
        context: linear and radial gradients (createLinearGradient,
        createRadialGradient, addColorStop), clip, clearRect, lineJoin,
        lineCap and ctx.canvas, the canvas element being drawn, whose
        client_width and client_height give its size in pixels. strokeRect
        now centres its outline on the rectangle, as HTML5 does.

- [Imp] DSPBridge: The server is no longer limited to plugins of its own
        version. It can host any plugin version that uses the same bridge
        protocol, so new plugin versions can be copied into the server's
        plugins folder next to the old ones without reinstalling the server.
        A client still gets the exact plugin version it asks for.

- [Fix] DSPBridge: On Windows, the server could corrupt memory and crash
        when a device sent a lot of MIDI at once or had a large state.
        Plugins and server have to be updated together for this, older
        plugins are not loaded by the new server.

88emuPlayer:

- [New] Added comprehensive README, shipped with the binaries.

- [New] Added `88EmuCli` for rendering MIDI files offline.

- [New] Added standalone cli params for scripting and advanced options.

- [Imp] Performance: Removed the additional emulation-worker buffering from
        playback and live MIDI for performance. The player now renders the board
        synchronously.

- [New] Devices: Added support for the original SC-55, SC-155, SC-155mkII,
        SCC-1A and SCB-55.

- [New] Devices: Added the XPGS / G-800 sound engine.

- [New] Devices: Added VE-GS Pro as a separate device.

- [New] Devices: Added experimental SC-8820 emulation.

- [New] Devices: Added experimental CM-32P emulation.

- [New] Devices: Added emulated power on/off button using the Q shortcut.

- [New] Devices: Added “Factory Reset on load” and “Fast Boot (skip intro)”
        settings.

- [Fix] Devices: Firmware that ran past the end of a 64 KB code page crashed the
        player, for example a program ROM booted with the wrong MCU ROM. The
        program counter now wraps to the start of the same page, as on the real
        CPU.

- [New] MIDI Player: Added Recomposer RCP/R36 (V2) and G36 (V3) playback support
        (thanks to masanaohayashi and shingo45endo).

- [New] MIDI Player: Added a configurable GM/GS/MT32 reset before each song.

- [New] MIDI Player: Added a configurable pause between automatically advancing
        songs.

- [Fix] MIDI Player: Starting another song now clears channel controllers and
        pitch bend, including when the per-song reset is Off, preventing the
        previous song's pitch bend from leaving instruments out of tune.
        Transport changes also invalidate file events still waiting in the
        player/engine queues.

- [Fix] MIDI Player: MIDI files with non-ASCII filenames can be opened through
        the Unicode-aware filesystem path, including on Windows.

- [New] Audio: Added selectable left and right hardware output channels,
        remembered separately for each audio backend and device.

- [New] Audio: Added “Use system device” for CoreAudio and Windows Audio
        (WASAPI), enabled by default for configurations without an explicit
        output choice.

- [New] Audio: Added an optional stereo-linked output limiter after the volume
        control, protecting playback and WAV recording when gain is increased.

- [New] Audio: Added optional analog output emulation, including DAC word
        precision and modeled output filtering. Select Off, Auto for the current
        device, or a specific circuit: CM-32P, SC-55, SC-55mkII, SCC-1, G-800,
        SC-88, SC-88VL, SC-88Pro, SC-8820 or SC-8850. Off remains the default.

- [New] MIDI: Each MIDI input can now play one or more independently selected
        part groups A–D, with assignments saved in MIDI settings. Available
        groups depend on the selected device.

- [Imp] MIDI: Expanded virtual MIDI inputs and outputs from A/B to A–D on
        supported platforms, exposing all four SC-8850 groups. Device output
        retains its original group, and launch options can customize the
        port-name prefix.

- [Fix] MIDI: Implemented the SC-88/SC-88Pro firmware's MIDI output path,
        allowing messages such as front-panel bulk dumps to reach the selected
        MIDI output.

- [Fix] MIDI: Forwarded the Yamaha SysEx messages needed to activate the
        SC-88Pro firmware's XG compatibility mode. This exposes the firmware's
        existing compatibility behavior; it does not add full Yamaha XG
        emulation.

- [Fix] MIDI: Paced SC-55mkII MIDI bursts to avoid overflowing the emulated
        controller's input buffer when many events arrive together.

- [New] ROMs: Added custom ROM loading by conventional filename and exact size,
        taking precedence over hash-based discovery. Known images still work
        under arbitrary filenames. Unrecognized or modified content produces a
        warning, with an option to suppress custom-ROM warnings.

- [New] ROMs: Unavailable devices in the device menu now open a ROM requirements
        dialog showing accepted filenames, sizes, hashes, missing components and
        compatible alternatives. The details can be copied, and the ROM folder
        can be opened directly.

- [Imp] ROMs: SC-8850 wave ROMs can now be supplied as two distinct 16 MiB
        banks, including recognized raw XP dump layouts, in addition to the
        existing combined decoded image.

- [Imp] ROMs: Recognized the SC-55mkII GS-28 2.00 image pre-patched with
        shingo45endo's capital-tone-fallback patcher using its default SC-55
        tone and v1 drum options. The player loads the patched image; it does
        not apply the patch itself.

- [Imp] ROMs: Limited automatic ROM searches to the player's data folder and its
        subfolders, avoiding unrelated legacy/product locations. `--rom-dir`
        selects an exclusive alternative folder. ROMs previously found only in
        older search locations must be moved or selected through this option.

- [Imp] ROMs: Optimized wave-ROM descrambling and compatible Pro-wave conversion
        during loading (thanks to hackyourlife).

- [Imp] UI: Reorganized the device menu to keep related models together.

- [Imp] UI: Device and context menus now open in separate scrolling popup
        windows, avoiding clipping at the edge of the player.

- [Imp] UI: Added system-font fallbacks for names containing characters absent
        from the bundled font, including CJK text, and normalized decomposed
        macOS filenames for display.

- [Fix] UI: The SC-8850 SHIFT, DEC and INC keyboard shortcuts now reach the
        corresponding panel controls, including shifted minus/plus keys.

- [Fix] UI: Mouse-wheel input on endless knobs now wraps instead of stopping at
        the ends of the range, including the SC-8850 value encoder.

- [Fix] UI: Clicking an open drop-down's control to dismiss its popup no longer
        immediately reopens it.

- [Fix] UI: On macOS, opening a temporary popup no longer hides the close button
        of windows without minimize/maximize controls.

Vavra:

- [Fix] Saving a sound limited some FX2 values to 29: the Speed of Chorus,
        Flanger, Phaser and Five FX, the Size of Reverb and the Delay time of
        the 5.1 Delay.

2.2.20:

Framework:

- [Fix] Switching the part through the MCP server left Vavra, Xenia, Osirus
        and OsTIrus showing the old part: the part selection did not move and
        the patch manager kept targeting the previous part.

- [Fix] The FX versions of OsTIrus, Vavra and Xenia did not show their device
        specific settings, such as the voice expansion option of Vavra and Xenia.

- [Fix] The DSP Bridge server ignored the plugins folder set in its
        configuration and only loaded plugins from the folder next to its
        executable.

- [Fix] The DSP Bridge server still started a device from a ROM that was
        damaged while being sent to it.

- [Imp] BUG-10327 The DSP Bridge server can now run a device from a regular
        plugin, not only from the server plugins that come with it. The
        plugin has to be the same version as the one in the DAW, and goes
        into the server's plugins folder.

- [Imp] If the DSP Bridge server cannot create the device, the plugin now says
        why, for example that the server has no plugin of that version,
        instead of showing "Error code 4".

- [Fix] BUG-10269 Dragging any edge of the plugin window other than a corner
        made the interface smaller and never larger again. The fixed aspect
        ratio was resolved from the proposed size alone, which always corrects
        the larger of the two dimensions - exactly the one an edge drag
        changes.

- [Fix] VST2 builds that use the fst fallback, which steps in when the
        Steinberg SDK is not present, corrupted the heap the first time the
        host asked for the speaker arrangement. Every channel count was
        affected, a mono bus included, and it could take down the plugin or
        the host.

- [Fix] Clock, start/stop, program change and channel pressure coming from the
        host carried whatever bytes happened to follow them in memory: three
        bytes were read from every message, however short it is.

- [Fix] SysEx that reaches the plugin in pieces was handed to the emulation
        twice, once reassembled and once as the raw fragments, which a
        firmware can read as channel data.

- [Fix] SysEx from a host that frames it twice lost its start byte instead of
        the surplus end byte, leaving a headless message behind.

- [Fix] BUG-10332 BUG-10337 The software renderer drew garbage and could crash
        the plugin with a skin that tiles an image across an area: it read
        past the end of the image instead of repeating it.

- [Fix] The DSP Bridge server kept a device that could not be initialized,
        for example because its firmware did not finish booting, and the
        connection to it hung. The plugin now shows why the device could not
        be created.

- [Fix] On macOS, the packages of the standalone effect plugins never
        contained the script that removes the quarantine flag.

Vavra/Xenia:

- [Fix] The patch manager saw every patch as a duplicate of every other one,
        because Vavra and Xenia never computed the fingerprint it compares:
        "Hide duplicates (by hash)" left a single patch, and finding a patch by
        its content matched all of them. Tags, favourites and renames saved
        before are kept. Once they are saved again by this version, older
        versions no longer show them.

Vavra:

- [Fix] The FM source lists of the oscillators and filters had no entries for
        the external input, so every choice after Noise landed three places
        further down: LFO 1 selected the left external input, Filter Env
        selected LFO 1, and the amp envelope, envelope 3 and envelope 4 could
        not be reached at all. Existing sounds are unaffected, they now show
        the source they actually use.

Xenia:

- [Fix] The dialog shown in demo mode was titled Vavra.


2.2.19:

Framework:

- [Fix] Closing a window while one of its drop-down or context menus was
        still open could crash. The menu removed itself from a document that
        was already tearing down, where every child has been detached from
        its parent before any of them is destroyed.

- [Fix] On macOS, the Metal renderer read the window and view geometry from
        its own render thread. AppKit is not thread-safe, and doing so while
        the message thread rearranges windows - reloading a skin, closing a
        settings window - can corrupt state that only fails much later, in an
        unrelated redraw. The geometry is now taken on the message thread.

- [Fix] On macOS, the interface could freeze or stutter while its window was
        hidden or covered by another one: the Metal render thread waited for
        a drawable while holding the UI lock, up to a second at a time, and
        the message thread starved waiting for it. And once that wait timed
        out, the frame was dropped without telling the update loop, which
        then waited for it forever - the window never updated again.

- [Fix] On Windows and Linux, the OpenGL thread could draw the interface
        while the message thread was changing it, without any lock between
        them. The redraw juce requests on a resize took that path.

- [Fix] With software rendering forced on Windows and Linux, the interface
        was drawn from the top left corner of the window rather than at the
        editor's position, so in a standalone it covered the title bar and
        lost its bottom rows.

- [Fix] After falling back from a software OpenGL rasterizer to the built-in
        software renderer, the interface stopped updating.

- [Fix] The DSP Bridge could crash or freeze the plugin, most often while a
        project was being saved or when the connection to the server stalled.

- [Fix] Picking a skin or a renderer from a menu could crash: choosing it closes
        the window the menu itself lives in, and the menu kept working with what
        was already gone.

- [Fix] After the renderer changed, anything drawn from a cached snapshot - a box
        shadow, for example - stayed invisible for the rest of the session.

- [Fix] Keys held down while the window lost focus stayed down on Linux, and a
        key that auto-repeated was reported as released once per repeat.

- [Fix] The plugin told the host its latency from the audio thread, once per
        block. Hosts answer that by suspending and re-preparing the plugin, so
        playback could be interrupted at any moment.

- [Fix] The interface could stall for as long as a frame took to draw, with
        mouse and keyboard input queuing up behind it, and a redraw that called
        back into the renderer could lock up completely.

88emuPlayer:

- [Fix] Selecting ASIO now waits for an explicit output-device choice,
        avoiding crashes from automatically loading an unsuitable driver.
        Opening the driver's control panel no longer uses a deleted device.

- [Fix] With software rendering forced, the interface was drawn into the top
        left corner of the window on Windows displays running at a scaling
        other than 100%, and mouse positions were off by the same factor. The
        software renderer sized its output in logical pixels while the image
        it draws into is sized in physical ones.

- [Fix] On the SC-8850, the front panel could stop responding after a while
        of playing a song: PART < and PART > did nothing, or a single press
        switched ALL mode on and off. The emulated CPU delivered an interrupt
        the firmware had just requested up to one audio sample late, and in
        that gap the firmware's own task scheduler lost the task that times
        the panel keys. Interrupts now arrive right after the instruction
        that requested them.

- [Fix] Panel switches are released when the window loses focus, so a stuck
        switch can no longer turn every later press into a key combination.

- [Fix] On the SC-88 and SC-88Pro, Display Letter and Display Dot Data
        messages were ignored: the emulated sub-MCU only passed SysEx with
        the GS model ID through to the main CPU, and the display messages
        use model ID 45H. Songs that draw on the level-meter dots now do.

- [Fix] On the SC-55mkII, a dense SysEx stream such as a display dot
        animation produced "Check Sum Error" and "DT1 Data Error" every few
        seconds. The emulated sub-MCU could hand the main CPU the same byte
        twice when its periodic wake-up fell between the CPU reading the
        status and reading the data.

- [Fix] On the SC-88 and SC-88VL, a song that follows its GS Reset with a
        burst of parameter SysEx without the pause the GS spec asks for could
        lock the module up: no sound, no panel. The emulated MIDI wire
        delivered such messages about a fifth faster than a real cable can,
        which drained the firmware's transfer buffers while it was still
        busy with the reset. SysEx is now paced by its full wire length.

- [Fix] Stopping or pausing a song left notes hanging on the SC-8850's part
        groups C and D, and so did removing the song that was playing. Panic
        and the GM/GS reset buttons reached only groups A and B as well. The
        player silenced two MIDI ports where a song can address four.

- [Fix] The player no longer sends MIDI clock to the emulated module.

- [Fix] On Linux the data and ROM folder was $HOME/Documents/The Usual
        Suspects instead of the XDG location the other plugins use. It is now
        $XDG_DATA_HOME (or $HOME/.local/share); the old folder is still read
        so an existing installation keeps finding its ROMs.

- [Fix] The MIDI settings no longer offer "Enable Virtual Port" on Windows.
        PortMidi can only create virtual endpoints on macOS and Linux, so the
        switch never did anything and left a polling thread running.

- [Fix] Added missing ASIO support.

- [Imp] "Force software rendering" now takes effect in the settings window as
        well, not only in the panel. Until now the settings kept drawing with
        the old renderer until they were closed and reopened.

- [Imp] The drop-down lists in the audio and MIDI settings open in a window of
        their own. They are no longer cut off at the edge of the settings
        dialog, and a long list such as the buffer sizes scrolls instead of
        spreading into columns across the whole page.

- [Imp] MIDI settings: the list of MIDI inputs is three times as tall, with one
        compact line per device, and the note about virtual MIDI ports on
        Windows sits below the list instead of crowding the output selector.

- [Fix] Fixed midi receive in the high level sub mcu emulation with midi files
        that send custom LCD messages.

- [Imp] ROM images are now identified by their size and content instead of by
        filename, and subfolders of a ROM search path are searched too. Dumps
        can be renamed or kept in an unsorted collection, either byte order of
        a mask ROM is accepted, and a truncated or unrelated file of the right
        size can no longer be mistaken for a ROM.

- [Imp] A device can only be selected once every ROM it needs is present.
        Incomplete ones are greyed out instead of failing when picked, the
        first complete device is used when the configured one is unavailable,
        and the missing-ROM notice names each image with its size and hash.

- [Imp] Added icon for the app.


2.2.18:

88emuPlayer:

- [New] First internal release.


2.2.17:

Framework:

- [Fix] BUG-10308 Skins: an animation did nothing at all when its keyframes
        name contained an uppercase letter, because the name was folded to
        lower case before it was looked up. Keyframe names are now case
        sensitive, the same as in CSS.

- [New] BUG-10200 Skins can react to notes being played. A skin script can
        now register for note on and note off and draw a keyboard, a velocity
        meter or an activity indicator, which was impossible before because
        notes go straight to the emulated hardware and never reach the
        parameter API. Notes are reported whatever their source and before
        MIDI Learn can consume them, and a note on with velocity 0 is
        reported as the note off it means. See doc/lua_scripting.md.

- [New] BUG-10302 Skins can store their own variables. A skin can now keep
        state the synth knows nothing about, such as which of its knobs it
        has linked together, in one of two scopes: per instance, saved and
        restored with the host project, or global, shared by every instance
        through the plugin config. Reading without naming a scope answers
        from the instance and falls back to the global, so a skin can ship a
        default and let a project override it. Values are numbers or strings
        and a callback reports changes. See doc/lua_scripting.md.

- [Imp] BUG-10273 BUG-10277 Mame HQ is now the default resampler mode, and
        the mode is remembered. A mode stored in a project is still used for
        that project; when a project does not carry one, the mode last
        selected on the settings page applies, and Mame HQ if it was never
        changed. Note that projects saved before this version did not store
        the mode at all while it was set to Legacy, so those open in Mame HQ
        now and need the mode set once if Legacy is wanted.

- [Fix] BUG-10313 Preset files of other plugins failed to import when they
        happened to contain an $f0 and an $f7 byte with arbitrary data in
        between. Such a pair is not a sysex message, but it was read as one,
        after which the importer considered the file parsed and never tried
        the format the file actually is.

Osirus:

- [Fix] Virus A OS 2.52 could not be used at all. The ROM was rejected while
        loading, because that OS carries one firmware chunk less than every
        later one, and it also derailed the emulated DSP while booting, over
        a loop construct that OS 2.80 no longer uses, leaving it silent.
        Both the .mid update files and a flash dump of that OS now work.

- [Fix] Presets imported from the TDM plugin lost their name if the file was
        not named after its position in a factory bank. "A29 Darkroom3" is
        imported as "Darkroom3" as before, but "Autobend BC" was imported as
        "BC" and is now kept as it is.

OsTIrus:

- [New] BUG-10237 TrancyTI skin: a Multi page. The eleventh tab opens a
        column per part with its volume, pan, transpose and detune, its low
        and high key, MIDI channel, output and note steal priority, and its
        enable switch, so the parts of a multi can be set up in one place
        instead of one part at a time. The MIDI channel dropdown now reads
        1 to 16 rather than 0 to 15. Making room for the tab made all eleven
        of them a little narrower.

- [Fix] BUG-10238 TrancyTI skin: the + and - markings around the SLOPE knob
        of the filter, envelope 3, envelope 4 and amplifier envelopes were
        the wrong way round. The panel had + on the left and - on the right,
        while turning the knob to the right raises the value, as every other
        skin shows it.

Vavra:

- [Fix] BUG-10184 Loading a Multi, Drum map or Arrangement asked the device to
        send the dump straight back, which is how the editor stays in sync when
        a single patch is loaded. With a whole arrangement going out at once the
        device answers such a request with what it held when the request was
        made, so late answers overwrote dumps that had only just been sent: the
        first Multi loaded after opening the plugin did nothing at all, and an
        arrangement lost a varying handful of its sixteen parts. Everything is
        now read back once, after the last dump is out.

- [Fix] BUG-10184 Drum maps are listed under the name they carry instead of all
        being called "Drum Map", and a renamed one is saved and exported under
        its new name.

- [Fix] A Drum map that was loaded is now part of the state the host saves, so
        it returns with the project instead of being lost.

- [New] BUG-10184 Patch Manager now supports Multi, Arrangement and
        Drum dumps alongside Singles. They are detected automatically
        on file import and tagged via the new "Type" category. Loading
        an Arrangement (Multi + 16 Singles) switches to Multi mode,
        applies the Multi and distributes the 16 Singles into the
        parts. Arrangements can be saved to user banks via the Save
        menu. Dropping a Multi or Arrangement onto a Part Button
        prompts for confirmation since it replaces more than one part.

Xenia:

- [Fix] BUG-10184 Loading a Multi or Arrangement asked the device to send the
        dump straight back, and those answers arrived late enough to overwrite
        what had just been sent, so the first Multi loaded after opening the
        plugin did nothing. Everything is now read back once, after the last
        dump is out, and the Singles of all parts are refreshed afterwards the
        way Vavra already did it.

- [New] BUG-10184 Patch Manager now supports Multi and Arrangement
        dumps alongside Singles. They are detected automatically on
        file import and tagged via the new "Type" category. Loading an
        Arrangement (Multi + 8 Singles) switches to Multi mode, applies
        the Multi and distributes the 8 Singles into the parts.
        Arrangements can be saved to user banks via the Save menu.
        Dropping a Multi or Arrangement onto a Part Button prompts for
        confirmation since it replaces more than one part.

2.2.16:

Framework:

- [Imp] BUG-10304 Skins can now animate on their own clock. A skin that
        declares an onframe handler on its body receives a frame event
        once per rendered frame, carrying the elapsed time and the time
        since the previous frame, which is what an oscilloscope or a VU
        meter needs. Until now the only way to loop an animation was to
        chain a CSS transition into itself. The rate is capped at 60 Hz,
        follows the refreshRateLimitHz config setting if one is present,
        and drops to nothing while the editor is off screen or while no
        skin asks for it. See doc/lua_scripting.md.

OsTIrus:

- [Fix] BUG-10276 The filter 1 mode buttons did not follow the loaded
        patch. A patch that uses one of the analog modes still showed the
        classic mode row with no button lit, both when loading a patch and
        when stepping through patches, even though the correct mode was
        active. Both rows now follow the parameter, and the AM button
        switches to Analog 1 Pole while the CM button switches back to
        Low Pass.

2.2.15:

Osirus:

- [Fix] EMU-88 Multi mode: changing the MIDI channel, the volume or any
        other per-part multi parameter of a part was ignored if another part
        had previously been set to the same value, and only took effect
        after changing it to a different value and back. These parameters
        were wrongly treated as global settings, which also caused them to
        be reported back to the editor as global settings of part 1.

OsTIrus:

- [Fix] Three spelling mistakes in the user interface: "ENVELOPER FOLLOWER"
        in the effects section, "PHASE INT" in the oscillator section and
        "TRANSPONSE" in the common parameters.

2.2.14:

Framework:

- [Fix] BUG-10281 BUG-10288 BUG-10278 macOS: the plugin failed to load and
        did not pass validation on macOS versions below 14, with dyld
        reporting a missing symbol for std::pmr::get_default_resource. The
        sysex buffer used a std::pmr::vector whose runtime symbols are only
        available on macOS 14 and newer; it now falls back to std::vector
        unless the deployment target is macOS 14 or later.

- [Fix] BUG-10293 macOS: the user interface was rendered even though the
        plugin editor was hidden or minimized, causing a high GPU load. The
        UI is not rendered anymore while it is not visible on screen.

- [Imp] Faster DSP emulation. The emulation core shared by all synths has
        been optimized and now runs about 20% faster on average, measured
        on Windows, Linux and macOS with both Intel/AMD and ARM CPUs. How
        much is gained depends on the patch, some benefit considerably
        more than others. This lowers CPU usage and allows running more
        instances at once.

2.2.9:

Framework:

- [Fix] macOS: emulation threads could lose their realtime status and end
        up being scheduled like background work, causing spikes and
        dropouts. The realtime scheduling parameters were computed with
        wrong units (microseconds instead of Mach time units) and an
        invalid period, and thread QOS classes were never applied.
- [Fix] Linux: thread priorities were never applied due to a bug in the
        priority mapping.
- [Fix] macOS: gradient decorators were rendered incorrectly with the
        Metal renderer and could break the rendering of the whole UI,
        leaving most of it black and seemingly frozen. The gradient
        parameters were uploaded to the GPU with a wrong memory layout.
- [New] macOS: setting disableMetalRenderer to 1 in the plugin config
        file makes the UI render with OpenGL instead of Metal. This
        helps to find out whether a rendering issue is Metal specific.
- [Fix] EMU-80 The MCP screenshot tool now works with the Metal renderer
        on macOS. Previously only the OpenGL path could capture.
- [New] Skins can now use SVG images via the RmlUi SVG plugin (svg
        element and svg() decorator), rendered with LunaSVG.
- [New] Lua binding for the canvas element with an HTML5-compatible 2D
        drawing context (fillStyle, strokeStyle, lineWidth, fillRect,
        strokeRect, beginPath, moveTo, lineTo, rect, arc, ellipse, fill,
        stroke). Skin scripts can draw custom graphics on a canvas.

2.2.7:

Framework:

- [Fix] BUG-10214 Linux: VST2 plugins were named "lib<Name>" because the
        shared object kept the default "lib" prefix. The prefix is now
        cleared so the VST2 is named like the other formats.

Osirus:

- [New] Galaxpel skin: added a Multi editor page with per-part controls
        for editing multi-mode patches.
- [Change] Osirus now ships with the Galaxpel skin only. The Hoverland
        and Trancy skins have been removed from the build. Existing users
        of those skins will fall back to Galaxpel.

2.2.6:

Framework:

- [Fix] EMU-75 Fix intermittent JIT cache crash during DSP boot caused
        by a race in the MmuHelper placeholder restore on Windows.
- [Fix] Fix crash in part button preset menu when comparing patches
        with null source pointers.
- [Fix] BUG-10209 Fix "Overwrite patch" option disappearing from save
        menu after saving once.

OsTIrus:

- [Fix] BUG-10191 TrancyTI skin: fix oversized Reverb disable overlays
        blocking the Feedback knob (applied to RML, removed obsolete JSON).

2.2.5:

Osirus/OsTIrus:

- [Fix] BUG-10201 Part button ROM preset menu now shows a checkmark
        next to the currently selected preset.

OsTIrus:

- [Fix] BUG-10192 TrancyTI skin: fix swapped OSC Wavetable/Wave panels
        and incorrect Filter header showing Envelope 4.
- [Fix] BUG-10204 Fix LFO 2 destination names in mod matrix showing as
        "LFO >" instead of "LFO 2>" and move them after LFO 2 Assign Amt
        in the destination list.
- [Fix] BUG-10191 TrancyTI skin: fix oversized Reverb disable overlays
        blocking the Feedback knob, and tiny scrollbar in Preset Browser.
- [Fix] BUG-10206 Fix Part Volume knobs showing -64 in Multi mode.
        The multi dump parser only accepted PAGE_D (TI globals) but
        dropped PAGE_C (per-part multi params like Part Volume). Now
        accepts both pages.

Framework:

- [Fix] BUG-10199 Fix build errors on macOS ARM64: SSE compiler flags
        were added on non-x86 architectures, and missing cstddef include
        for size_t in dac.h.

2.2.4:

Framework:

- [New] BUG-10179 MIDI Learn: Invert option per mapping. Incoming CC
        values and outgoing feedback can now be inverted (a new
        "Invert" checkbox in the MIDI Learn settings page).
- [Imp] Support parsing of ".mid" files that are not really midi but
        raw sysex
- [Imp] ParameterDescriptions: "toText" now accepts an object form
        {format, scale, offset} that synthesises a value list at load
        time. Lets devices with non-7-bit native parameter ranges
        declare native min/max and produce human-readable display text
        without controller-side scaling.

- [Fix] BUG-10177 Third-party skins: Plugin-specific settings pages
        (e.g. Voice Expansion) are now loaded from the embedded plugin
        binary when a skin is loaded from disk
- [Fix] BUG-10189 Fix crash on the audio thread when a rate-limited
        parameter is automated by the DAW.

Osirus/OsTIrus:

- [New] BUG-10194 Master Tune is now exposed as a public parameter,
        bipolar (signed, +/-64 cents). Available for host automation
- [New] BUG-10184 Patch Manager now supports Multi and Arrangement
        patches alongside Singles. Multi, Arrangement (Multi + 16
        Singles) and Single dumps are detected automatically on file
        import and tagged via the new "Type" category. Arrangement
        loading from Patch Manager switches to Multi mode, applies
        the multi and distributes the 16 referenced Singles into the
        parts. A new "ROM Arrangements" data source exposes factory
        arrangements from Osirus (ABC) ROMs (not available for
        OsTIrus TI ROMs). Arrangements can also be saved to user
        banks via the Save menu. Dropping a Multi or Arrangement onto
        a Part Button prompts for confirmation since the target
        affects more than just that part.

Vavra:

- [Fix] BUG-10172 Voice Expansion: fix audio dropouts and short CPU
        stalls, especially noticeable at small buffer sizes
- [Fix] Fix possible crash during shutdown

Xenia:

- [Fix] Voice Expansion: lower UC-thread latency, reducing audio
        glitches at small buffer sizes (shared fix with Vavra)

2.2.3:

Framework:

- [New] EMU-73 Native Metal renderer for macOS, replacing the
        deprecated OpenGL path. Supports all rendering features
        including backdrop blur, filters, drop shadows, gradients,
        clip masking and MSAA.
- [New] EMU-70 Lua scripting support for skins. Skin authors can use
        Lua scripts in RML files to create dynamic UI behavior, read
        and write synth parameters, and react to parameter changes.
        See doc/lua_scripting.md for documentation.

- [Fix] Fix file drag and drop onto part buttons (patch name, part
        slots) not accepting dropped .syx/.mid files
- [Fix] MIDI Learn: Feedback to host and physical MIDI ports was not
        working
- [Fix] Fix crash on plugin shutdown when a physical MIDI port was
        active and a MIDI event arrived during shutdown (common problem
		for controllers that send MIDI clock)
- [Fix] BUG-10159 CLAP: Fix keyboard input in text fields (cursor
        jumping, digit reordering) on Windows
- [Fix] #262 Restore Windows 7 compatibility
- [Fix] BUG-10144 Fix combo box value mapping for parameters with empty
        entries (e.g. Phaser Stages in Osirus)
- [Fix] BUG-10163 Software renderer: Fix GUI content shifting when
        window is partially off-screen
- [Fix] BUG-10168 Software renderer: Fix triangle rendering ignoring
        scissor clip region (settings dialog overflow)
- [Fix] EMU-42 Patch Manager: Fix file move failures with multiple
        plugin instances in the same DAW
- [Fix] BUG-10166 Fix slider following knob after double-click

Osirus:

- [Imp] Faster startup by extracting factory presets directly from ROM

OsTIrus:

- [Imp] Faster startup by extracting factory presets directly from ROM
- [Imp] Trancy skin: Visual polishing (oscillator, filter, LFO, FX panels,
        filter routing icons, waveform shape buttons)

JE8086:

- [Fix] BUG-10068 Trancy skin: Arp speed parameter now matches front panel
        labels
- [Fix] EMU-58 Trancy skin: Fix settings dialog font size
- [Fix] BUG-10161 Fix saved performances split into separate entries
        after DAW restart

Vavra:

- [New] EMU-48 Voice expansion: Emulates 3x DSP configuration for
        75-voice polyphony. Enable in Settings > DSP/Audio. Setting is
        preserved per instance, default is off

Xenia:

- [New] EMU-48 Voice expansion: Emulates 3x DSP configuration for
        30-voice polyphony. Enable in Settings > DSP/Audio. Setting is
        preserved per instance, default is off

NodalRed2x:

- [Fix] BUG-10113 Trancy skin: Added Program/Performance mode toggle. In
        Program mode (default), loading a patch mutes other slots to prevent
        hanging presets
- [Fix] BUG-10156 Trancy skin: Fix settings dialog rendering issues caused
        by missing font size

2.2.2:

Framework:

- [Imp] BUG-10125 Browser grid view now supports mouse wheel scrolling for
        horizontal navigation
- [Imp] Added parameter linking for individual parameters

- [Fix] EMU-18 Patch Manager: MIDI Banks category now appears for all synths
        (was missing in Xenia, Vavra, and NodalRed2x)
- [Fix] EMU-18 Patch Manager: MIDI bank assignments now persist across
        plugin reloads (added serialization to binary cache)
- [Fix] EMU-18 Patch Manager: MIDI Banks category is now collapsed by default
- [Fix] BUG-10148 Patch Manager: Dragging a folder onto the data sources
        tree now correctly adds it as a folder source instead of a file
- [Fix] Patch Manager: Fix potential crash when scrolling group tree node
        into view after element was destroyed
- [Fix] Software Renderer: Fix UI scaling issue in Bitwig when monitor
        DPI is set above 100%
- [Fix] BUG-10102 Parameter Links: Prevent circular link dependencies that
        caused erratic controller jumps. Bidirectional links are now rejected
        with a user-facing warning dialog
- [Fix] BUG-10111 Linux: Fix crash when loading multiple TUS plugin types
        in the same DAW process, caused by ELF symbol interposition between
        plugin shared objects
- [Fix] BUG-10134 Fixed parameter rate limiting firing too fast due to
        unreliable JUCE timer, causing sluggish wavetable bank cycling
- [Fix] BUG-10117 Combo box mouse wheel scrolling now follows display order
        for custom-ordered dropdowns (e.g. Page Matrix Assign Destination)
- [Fix] Right-click context menu now opens correctly on scrollbar/slider
        elements instead of falling through to the global menu
- [Fix] BUG-10153 Patch Manager: Fix crash when typing in browser search
        columns caused by invalid tree node cast during filtering

JE8086:

- [Imp] EMU-50 Create better default values when doubleclicking on a parameter
- [Imp] BUG-10102 Added parameter locking/linking for JE8086

- [Fix] BUG-10113 Loading a single patch in patch display mode now switches
        key mode to Single to prevent the other layer from staying active

Xenia:

- [Imp] BUG-10134 Reduced wavetable bank cycling rate limit from 250ms to
        100ms for smoother Wave knob interaction

NodalRed2x:

- [Fix] BUG-10010 Master Tune knob now correctly affects tuning (firmware
        protects the value during multi dump processing, fix applies it
        directly to MCU memory)
- [Fix] BUG-10110 Arpeggiator/LFO timing no longer slows down under heavy
        MIDI traffic (CC rate limiting prevents firmware event queue saturation)

OsTIrus:

- [Fix] BUG-10149 Master Volume knob now displays and updates correctly.
        Global parameters were being dropped when received from the device

2.2.1:

Framework:

- [Imp] EMU-6 MIDI Learn Mode: Replaced single-parameter dialog with a 
        full visual overlay mode. Enter via right-click context menu, 
        overlays appear on all parameters showing bound/unbound state.
        Left-click to select a parameter for learning, right-click to 
        clear a mapping. Press Escape to exit MIDI Learn mode.
- [Fix] Removed old MIDI Learn dialog (replaced by overlay mode)
- [Fix] Fix crash when closing plugin while MIDI Learn mode is active

2.2.0:

Framework:

- [Imp] New Settings screen replacing context menu options, with pages for:
        MIDI routing matrix with presets, DSP & Audio (latency, gain,
        DSP clock, resampler mode), and Skin/GUI (skin selection, scale, 
        software renderer toggle)
- [Imp] EMU-6 MIDI Learn: Map any physical MIDI controller to synth 
        parameters with auto-detection of absolute and relative modes.
        Supports CC, Pitch Bend, Aftertouch, and Poly Pressure.
        Includes preset management, conflict detection, and MIDI feedback.
- [Imp] EMU-23 Part buttons: Right-click copy/paste via system clipboard,
        enabling patch transfer between multi and single mode
- [Imp] Add MAME high-quality and lo-fi resampler modes as alternatives 
        to the legacy resampler, selectable per instance in DSP & Audio settings
- [Imp] Optimize MAME resampler: use contiguous scratch buffers in FIR 
        loops, eliminate per-callback heap allocation
- [Imp] EMU-18 Patch Manager: Program change banks — assign MIDI bank 
        numbers to data sources, enabling Bank Select + Program Change to 
        select patches from the patch manager. Factory ROM banks get 
        default assignments. Respects MIDI routing matrix settings.

OsTIrus:

- [Imp] Add sample rate selection to DSP & Audio settings

2.1.4:

Framework:

- [Fix] EMU-42 Patch Manager: Fix threading bugs and file I/O race 
        conditions with multiple plugin instances
- [Fix] Patch Manager: Fix ghost nodes remaining in tree after
        clearing a search filter
- [Fix] Patch Manager: Fix non-matching folder nodes remaining
        visible during tree search filtering
		
Vavra/Xenia:
- [Fix] Fix state not being preserved when reloading
        a DAW session

2.1.3:

JE8086:

- [Fix] Preset no longer preserved when reloading a DAW session

2.1.2:

Framework:

- [Imp] BUG-10120 allow to drag sliders slower by using shift key
- [Imp] BUG-10130 Add IParameterFinder support for VST3 plug-ins
        to support "AI knob" control surfaces

- [Fix] BUG-10135 Patch Manager now works with WSL2 EXT4 mounted drives
- [Fix] BUG-10136 Conditional parameter links now work with mouse wheel
- [Fix] BUG-10133 Parameter values now correctly update when dragging controls quickly
- [Fix] Crash when loading plugin on some Linux distributions

Osirus/OsTIrus:

- [Fix] BUG-10118 Double-clicking in preset name field no longer shows CSS properties

Osirus:

- [Fix] BUG-10106 Hoverland/Galaxpel skins: Rename LFO SHAPE to reverb TYPE
- [Fix] BUG-10106 Galaxpel skin: Reverb Type was not selectable
- [Fix] BUG-10106 Galaxpel skin: Fix swapped 
        parameters LFO 3 Keytrack and LFO 3 Fade In
- [Fix] BUG-10106 Hoverland skin: Fix Envelope Polarity button inverted
- [Fix] BUG-10106 If Cutoff Link is active, Cutoff 2 values are displayed 
        as offset to Cutoff 1 in range -64 to +63

2.1.1:

Framework:

- [Fix] BUG-10089 Crash when unloading plugin while automating a parameter
- [Fix] Warning dialog and broken UI in certain hosts if host alters     
        the locale to something that uses , as decimal point instead of .

JE8086:

- [Imp] Patch Manager: Add support for .pat/.pfm preset files

- [Fix] BUG-10098 Automation parameters not updating when selecting a 
        different patch/performance
- [Fix] Support Patch/Performance Dumps from edit buffers
- [Fix] Patch Manager list might erratically jump when selecting a Performance
- [Fix] Test Console: Fix name of binary and add missing macOS setup script

Osirus/OsTIrus:

- [Imp] BUG-10100 Patch Manager: Add support for .tfx presets from TDM plugin

Osirus:

- [Fix] BUG-10075 swap labels Slot 1 and Slot 3 [Hoverland/Galaxpel skins]
- [Fix] BUG-10106 Galaxpel skin: LFO link buttons had no effect
- [Fix] BUG-10106 Galaxpel skin: Add Pure Tuning parameter to global page
- [Fix] BUG-10106 Galaxpel skin: Fix inverted LFO Env Mode and Poly/Mono buttons

OsTIrus:

- [Fix] BUG-10083 Mode and Type labels were reversed for Delay on FX 2 page

Xenia:

- [Fix] BUG-10057 BP Filter Offset din't display bipolar but unipolar values
- [Fix] BUG-10108 Crash when dragging a wave in the wave editor

2.1.0:

Framework:

- [Fix] BUG-10085 Do not expand factory ROM presets tree node by default
- [Fix] BUG-10084 Linux: Plugin editor cannot be operated after releasing 
        the mouse

JE8086:

- [Sad] Removed the volume knob animation that "emulated" the loose knob
        from the hardware. Apparently most people never owned the hardware 
		and thought it was a bug

OsTIrus:

- [Fix] Automation became incompatible with 2.0.15 due to Chorus Type parameter
        fix. Parameter versioning has been introduced to prevent this in the 
		future. Parameters are now compatible with 2.0.14 and below again.
- [Fix] Fix Serial 6 routing displaying two times "4 Pole" instead of 
		"4 Pole" and "2 Pole"
- [Fix] Typo "DESTENATION" on LFO page
- [Fix] Typo "CUTTOFF" on Filter page
- [Fix] Analogue filter modes button not lit if analogue modes page selected

NodalRed2x:

- [Imp] Added "secret" Notch filter type

2.0.15:

Osirus/OsTIrus:

- [Fix] State not correctly saved in Single Mode

OsTIrus:

- [Fix] Chorus Type displayed the same value regardless of selected part

2.0.14:

Framework:

- [Imp] Implemented software renderer that is used if no compatible OpenGL 
		version is available. Software rendering can be forced via config
		file: Set forceSoftwareRenderer to 1 

- [Fix] Further attempts to improve thread priority for DSP threads on macOS
- [Fix] List view in patch manager might not always refresh correctly when
        selecting a different bank

Osirus/OsTIrus:

- [Fix] Single not properly restored if save state was saved while 
        Multi mode active

JE8086:

- [Imp] JE-8086 is now compatible with DSP Bridge
- [Imp] Added JE test console, a command line tool to test performance by
        rendering the factory demos to a .wav file

2.0.13:

Framework:

- [Imp] Improved compatiblity with Win 7 and older OpenGL versions

JE8086:

- [Fix] At latency setting 0, processing is now done in the audio thread to 
        prevent spikes when app is not in focus
- [Fix] BUG-10060 Remote Control Channel resetting to 1 if set to Off
- [Fix] BUG-10064 Patch/Performance toggle button state not reporting the
        correct state after switching skin
- [Fix] BUG-10060 Performances were saved incorrectly and caused issues when 
		loading them again
- [Fix] BUG-10058 Fix Osc 2 Fine/Wide center values and 
        incorrect parameter value labels

Osirus/OsTIrus:

- [Fix] UI always opened in Single mode even if plugin state was
        saved in Multi mode

OsTIrus:

- [Fix] Part Midi indicators were slow and only refreshed twice per second

Xenia:

- [Fix] BUG-10067 Wave tables not refreshing when opening Wave Editor 
        for the first time
- [Fix] BUG-10066 Wave/Frequency/Phase editor click+drag not working

2.0.12:

NodalRed2x/OsTIrus:

- [Fix] Dropdown texts overlapping with down arrows

2.0.11:

Framework:

- [Fix] BUG-10045 Vertical sliders won't reset to 0 but to -1 on double click
- [Fix] BUG-10051 Do not send gesture begin/end to host if parameter is 
        changed via midi CCs

JE8086:

- [Imp] UI polishing and improvements
- [Fix] Add Remote Midi Channel selection to UI. The Remote Midi Channel is 
        used for the arpeggiator and split key mode. 
		The default value has now changed from 3 to 1 for new instances.
- [Fix] Voice Assign numbers were reversed, now correctly display Upper-Lower
- [Fix] Selecting a Performance in Patch Manager didn't update the selection
        for both parts, causing Patch Manager to select obsolete patches when
		switching between Upper / Lower
- [Fix] BUG-10053 Upper/Lower button state ignored after loading Performance 
        from browser
- [Fix] BUG-10050 No visual feedback when controlling Osc 2 Fine via Midi CC

Osirus:

- [Fix] Incorrect default value for Osc 2 Detune
- [Fix] Galaxpel/Hoverland skins: dropdown texts overlapping with down arrow

OsTIrus:

- [Fix] Dropdown texts overlapping with down arrow

2.0.10:

Framework:

- [Fix] BUG-10043 First GUI event "eaten" on plugin init

2.0.9:

Framework:

- [Fix] Thread priorities were not set correctly on Mac/Linux, solves 
        BUG-10040 Track performance affected by application focus
- [Fix] BUG-10039 Right clicking a menu entry opened a second menu
- [Fix] Reworked UI frame timing to use less resources
- [Fix] Patch Manager: Exported patches may not have consecutive 
        bank/program numbers

JE8086:

- [Imp] Added Performmance/Patch LCD toggle button
- [Imp] UI has been further polished

- [Fix] BUG-10037 Osc Range -12/+12 placement on UI didn't match parameter value

2.0.8:

Framework:

- [Imp] Patch Manager: Setting to hide duplicates by name & hash are now 
        remembered when reopening the plugin

- [Fix] Random tooltips shown when resizing the plugin window
- [Fix] BUG-10035 Automation randomly stopped working in some hosts due to UI 
        sending automation events back to host
- [Fix] EMU-25 focused parameter keeps dragged element in focus

JE8086:

- [Imp] Default Master Volume and maximum Master Volume increased by 12 dB
- [Imp] Expose Master Volume and Master Tune as automatable parameters
- [Imp] Velocity/Control Assign has been redesigned, now uses new
        graphics for knobs/sliders
- [Imp] Patch Manager design improved to match the overall synth design
- [Imp] Overall UI polishing and improvements

- [Fix] Oscillator Shift dropdown was reversed, causing mouse wheel to work
		in the wrong direction
- [Fix] Automating a parameter while both parts were selected cuased the other
		part to be modified too and caused some hosts to disable the automation
		lane
- [Fix] Some Midi CCs updated the UI but didn't modify the patch because CC mode
        was set to Mode 1 instead of Mode 2

2.0.7:

JE8086:

- [Fix] Incorrect parameter range for Velocity & Control Assign for Oscillator 2
        Range and Fine/Wide
- [Fix] Possibly lost midi events when automating many parameters at once

2.0.6:

Framework:

- [Fix] [UI] Pressing a button should not set the "checked" pseudo-class, that is what
		the "active" state is for. BUG-10026 Furthermore, checked state was kept when 
		moving out of the button while holding the mouse button down.
- [Fix] [UI] Missing repaint if parameter changed via Midi CC causing sliders to jump
- [Fix] Possible crash when resizing the editor window

JE8086:

- [Fix] MIDI timing issues due to synchronization problems, more prominent when rendering
- [Fix] Some controls only affected Upper Part even if Lower Part was selected:
        Amp Pan / Amp LFO1 Depth / Bend Range Up & Down / Transpose
- [Fix] Damaged MIDI files when exporting patches via drag & drop

2.0.5:

JE8086:

- [Imp] UI polishing and improvements
- [Imp] Support MIDI Control Changes for all parameters according
        to specification of original hardware

- [Fix] Performances were saved in a broken state
- [Fix] Much better MIDI timing & correction of reported latency to host
- [Fix] Save menu for Performances didn't show "Performance" but "Patch Upper"

2.0.4:

Framework:

- [Imp] Add ability to cycle through drop down entries and radio button groups 
        via mouse wheel

- [Fix] Fix inverted mouse wheel on Mac if natural scrolling is enabled

JE8086:

- [Fix] Slow boot when opening the plugin for the first time
- [Fix] Validate ROM content before attempting to boot the device to prevent crashes due to
        other ROMs in the same folder that might not belong to the synth
- [Fix] Default Master Volume is now higher and the highest possible value has been increased
        too. Furhtermore, the displayed percentage values have been adjusted to show
		lower values overall

2.0.3:

Framework:

- [Imp] DSP Bridge: The last connected host is now stored as part of the plugin state
        and is reconnected to automatically on next plugin load.
		If a connection cannot be established, the plugin will display a warning message
		and will automatically fall back to local processing.

- [Fix] BUG-10016 Added OpenGL 2 renderer as fallback if OpenGL 3.3 is not supported to
		fix crashes on older hardware / Raspberry Pi
- [Fix] BUG-10013 Sliders can now be adjusted via mouse wheel.
- [Fix] BUG-10014 Patch Manager: Child data sources were still visible even
        if parent node closed.
- [Fix] BUG-10017 Tooltips could exceed screen bounds in some cases
- [Fix] Patch Manager: List entry was being force-selected when being dragged
- [Fix] Patch Manager: Patch list didn't refresh after renaming a patch
- [Fix] Patch Manager: Drag & Drop from patch list to patch slot of UI (depending on plugin) 
        not working
- [Fix] Wrong initial state of toggle buttons bound to a parameter
- [Fix] Toggle buttons that are part of a radio group shouldn't disable when clicked again
- [Fix] Vertical sliders being reversed when bound to a parameter
- [Fix] Erratic behaviour of tooltips/focused parameters when multiple parameters 
        are automated
- [Fix] Focused parameter display & tooltips not working for sliders

Xenia:

- [Fix] BUG-10017 Tooltips were placed too far away from knobs

NodalRed2x:

- [Fix] Knobs might not refresh when VM map is switched on/offq

2.0.2:

Framework:

- [Fix] Disable all DSP Bridge related network activity if DSP Bridge is
        not explicitly enabled via config file.
- [Fix] Context Menus didn't open via Ctrl+Click on macOS.
- [Fix] Plugins consumed all keyboard events regardless of if they were
 		actually handled or not. This caused issues in various hosts. For example,
		it prevented using the space bar to toggle playback while the plugin was
		focused.
- [Fix] Content flickering in some hosts when resizing the plugin window to odd 
        aspect ratios

NodalRed2x:

- [Fix] Fix incorrect Arpeggiator timing on excessive MIDI activity

Osirus/OsTIrus:

- [Fix] Changed default Master Volume from 92 to 127. Master Volume only affects
		The first stereo output and caused different levels when using multiple outputs.
		The default value of 92 was initially chosen to match the TI hardware in USB mode
		but as it affects output pair 1 only it caused more confusion than benefits.
		In OsTIrus, the Master Volume can be adjusted if needed via the global page.
		If you need the TI-matching volume of 92 it can easily be restored by double clicking 
		the knob.
		Note that saved projects are not affected, only new instances will use the new default.

Vavra:

- [Imp] Added patch names below part select buttons

- [Fix] Oscillator Shape knobs were continous instead of stepped
- [Fix] Initial state of multi mode button not restored when reopening UI

Xenia:

- [Fix] MIDI LED was not working

2.0.1:

Framework:

- [Imp] Incresed size of RmlUi debugger

- [Fix] Knobs didn't respect the selected part and always displayed/modified part 1
- [Fix] Patch Manager: Data sources were not sorted
- [Fix] Patch Manager: List/Grid cell sizes height increased to cover descenders of letters like 'g' or 'y'
- [Fix] UI didn't repaint immediately when parameter is modified via automation or MIDI
- [Fix] Skin conversion didn't work when skin was in the legacy location next to the plugin
- [Fix] Multiple context menus could be opened at the same time

Xenia:

- [Fix] Wave Editor: Copy to selected Table menu now uses a grid to 
        prevent that the menu is too long to fit on screen
- [Fix] Octave knobs were not in steps but continuous
- [Fix] Fix patch manager grid cell width not covering standard patch name size

Vavra:

- [Fix] Octave knobs were not in steps but continuous
- [Fix] Fix patch manager grid cell width not covering standard patch name size

NodalRed2x:

- [Fix] Master Volume knob not working

2.0.0:

Framework:

- [Imp] Juce GUI has been replaced with RmlUi, a HTML/CSS based UI framework.
		This allows to create more complex and visually appealing UI skins.
		More information can be found at
		https://dsp56300.wordpress.com/2025/08/19/rmlui-new-gui-rendering-engine-skinning-system/

Osirus/OsTIrus:

- [Imp] Patch Manager: Added support to extract presets from 
        SoundDiver .lib files

Xenia/Vavra:

- [Fix] Fix possible crash related to the LCD

1.4.5

Framework:

- [Fix] Physical MIDI input was not disabled when changing port from any
        valid input to none
- [Fix] The program name was always returned as "default" even if previously
        modified via the host. This fixes incorrect host preset names after 
		a rename in Logic, Reaper and possibly other hosts
- [Fix] Various issues if root path contains non-ASCII characters

DSP Bridge:

- [Fix] Plugin might crash if an invalid UDP packet is received

Xenia:

- [Imp] Add support to load MW1 user waves & tables
- [Imp] Add support for UPAW and Speech tables
- [Imp] Add ability to export to .syx instead of .mid via drag & drop by 
        holding shift while dragging
- [Imp] Add export of wave tables as .mid, .syx and .wav via context menu

- [Fix] User Tables might sound incorrect because they were not always 
        transmitted to the device when being selected

- [Fix] UI: BP Offset values were displayed as unsigned instead of signed 
        for dual filter

Vavra:

- [Fix] UI didn't react to parameter changes via MIDI controller messages

1.4.4

NodalRed2x:

- [Fix] It was no longer possible to add new files/folders to patch manager

Xenia:

- [Imp] Add support to load patches from files that include custom waves and
        wavetables
- [Imp] Wave Editor has been added to create/import/export custom Waves and
        Control Tables
- [Imp] Custom Waves/Control Tables are now exported with the Patch when
        exporting via Patch Manager

- [Fix] Checksum of exported patches was incorrect due to bug in documentation
- [Fix] Emulator might get stuck while "Reorganising Memory"
- [Fix] UI didn't react to parameter changes via MIDI controller messages

OsTIrus:

- [Imp] UI has been reworked with larger filter knobs, better routing visualization,
        selectors for the filter type and more changes to make the plugin 
		more visually appealing

1.4.3

NodalRed2x:

- [Imp] Added option to export patches from patch manager as .nl2 format, which 
        includes patch names. This was previously always the case for .syx and .mid
		exports but has now been restricted to .nl2 to ensure compatibility of .syx
		and .mid exports with hardware devices

- [Fix] Fix plugin getting stuck after 12 hours of use

1.4.2

Framework:

- [Imp] Skinning System: Added ability to add parameter bindings to labels
- [Imp] Skinning System: Added roughly CSS-based styling system. This allows to
        move properties that are common to all buttons/knobs/etc to a single style
		to prevent that they need to be repeated for each element.
		Export the latest NodalRed2x skin to see the new format

- [Imp] Downgraded to Juce 7 to regain compatibility with Windows 7 & fix font
        rendering issues on macOS      

NodalRed2x:

- [Imp] Fix possible race condition in UC/DSP synchronization that may have been the
        reason for a deadlock, causing the plugin to hang the DAW. Note that we cannot 
		reproduce the issue on our test systems, please report back if the issue has 
		been resolved

1.4.1

Framework:

- [Imp] Allow to find patches with similar parameter setting by right clicking on 
        a knob and selecting "Find similar..."
- [Imp] Allow to add a patch to a user bank by dragging it onto the free space of
        the patch list

- [Imp] [Skins] Add new option "boldRootItems" to tree view style to disable that root
        items are displayed in bold font (default 1 = enabled)
- [Imp] [Skins] Add new option "antialiasing" for label style to disable antialiased
        font rendering (default 1 = enabled)

- [Fix] Patch Manager might report file access errors that are not relevant
- [Fix] Renamed patches might be displayed with previous name when loaded

Osirus:

- [Imp] test console: Add support for Virus B demo song

NodalRed2x:

- [Imp] VM Map indicators are now displayed relative to the current parameter value
- [Imp] VM Map indicators are now hidden if the parameter is zero
- [Imp] VM Map mode can now be toggled via shift key
- [Imp] Patches now use the name of the source file as patch name if the file contains
        exactly one patch (requires refreshing the data source via context menu)

- [Fix] Parameter automation was not smooth if multiple slots were mapped to the same
        MIDI channel

Xenia:

- [Fix] Mouse wheel not working on Aliasing and Time Quant knobs

1.4.0

Framework:

- [Imp] Upgraded to Juce 8.0.3 which uses Direct2D on Windows for faster UI rendering
- [Imp] Patch Manager now stores its database in the user documents folder, next
        to skins and roms:
        c:\Users\<username>\Documents\The Usual Suspects\<synthname>\patchmanager (Win)
        ~/Documents/The Usual Suspects/<synthname>/patchmanager (Mac)
        [XDG_DATA_HOME or ~/.local/share]/The Usual Suspects/<synthname>/patchmanager (Linux)
        Any existing database in the old location is automatically migrated to
        the new one.
- [Imp] Config file location has been changed and is now located in a subfolder
        "config" next to the other folders. Existing configurations in legacy
        locations are migrated automatically.

NodalRed2x:

- [Fix] LFO2 rate & range didn't have red VM map overlay dots
- [Fix] VM Map overlay dots always displayed values for slot A

Osirus/OsTIrus:

- [Fix] Add support to load Arrangement Dumps that contain 16 Singles and one Multi
- [Fix] Bank Selects in Multi Mode selected Bank - 1
- [Fix] Program Changes in Multi Mode not executed without previous Bank Select > 0
- [Fix] Bank Selects and Program Changes in Multi Mode treated MIDI channel as part 
        number even if parts were mapped to a different MIDI channel
- [Fix] UI didn't react to MIDI Program Changes

OsTIrus:

- [Imp] Cutoff 2 is not displayed as an offset to Cutoff 1 if Cutoff Link is active

- [Fix] Duplicated factory presets and lost favourites when switching between
        TI2 and Snow mode
- [Fix] DSP crashed when loading a patch while parameters are locked
- [Fix] .vtibackup files may have been imported incompletely

Vavra:

- [Imp] Display LFO speed values as bars/beats if in clocked mode

1.3.21

DSP:

- [Imp] Performance improvements

Framework:

- [Imp] Added new entry to 'Skins' submenu to open the skins folder in the default
        file browser
- [Imp] All MacOS builds now include a script to remove quaratine attributes
- [Imp] The default skin folder has changed. Custom skins are now supposed to be in:

        c:\Users\<username>\Documents\The Usual Suspects\<synthname>\skins (Win)
		~/Documents/The Usual Suspects/<synthname>/skins (Mac)
		[XDG_DATA_HOME or ~/.local/share]/The Usual Suspects/<synthname>/skins (Linux)

		Existing skins in the old location are still supported to ensure backwards
		compatibility

- [Imp] ROMs are now also searched for in the following directories

        c:\Users\<username>\Documents\The Usual Suspects\<synthname>\roms (Win)
		~/Documents/The Usual Suspects/<synthname>/roms (Mac)
		[XDG_DATA_HOME or ~/.local/share]/The Usual Suspects/<synthname>/roms (Linux)

		For backwards compatibility, it is also possible to copy ROMs next to the 
		plugins as it was before

- [Imp] If a firmware is missing, the target folder is now being opened to prevent
        that a user has to search for it manually

- [Fix] FX plugins didn't apply latency when being processed as bypassed, causing the
        signal to appear early
- [Fix] Tooltips didn't refresh correctly in some hosts / plugin formats
- [Fix] Redraw issues in Bitwig on Windows if DPI is set to a value != 100%
- [Fix] VST3: Hosts didn't pick up new parameter values when switching presets or 
        loading state

NodalRed2x:

- [Imp] Added indicator around knobs to show the current VMMap parameter value

- [Fix] Display a proper message if the plugin is loaded without ROM

OsTIrus:

- [Fix] Some parameters couldn't be automated in some hosts due to DSP echoing 
        parameter changes back, causing some hosts to tread them as "edits", disabling
		automation lanes (e.g. Ableton, Logic)

Xenia:

- [Fix] Initial UI state might be incorrect, not showing the preset that was loaded

1.3.20

Framework:

- [Imp] Strip path names from skin names in GUI Skin submenu (mkruselj)

- [Fix] Patch Manager: Lost Favourites/Tags/User Banks if plugin closed before scan
        finished
- [Fix] Crash when dragging a patch from Patch Manager to a part slot
- [Fix] Crash when dragging a patch on an empty area in grid view
- [Fix] Drag target slot rectangles displayed in grid view for areas without content
- [Fix] Continue MIDI clock generation while DAW sequencer is stopped

NodalRed2x:

- [Imp] Support performances from .nl2 patch dumps

- [Fix] Region Locking is now implemented
- [Fix] UI state not updated when loading preset via DAW
- [Fix] Synth lost state of previously loaded DAW preset after switching the active part
- [Fix] Negative VM MAP values were displayed as maximum positive values after loading
        a patch or DAW state
- [Fix] Performances saved via "Store" button couldn't be loaded
- [Fix] Crash when storing a performance via "Store" button while slot A is selected
- [Fix] Patches with a different device ID failed to load
- [Fix] Parameter tooltips for VM map parameters displayed values for the non-VM 
        versions when hovering
- [Fix] Crash when toggling filter distortion on a part that shares the same MIDI
        channel with another part
- [Fix] Arpeggiator stopped while DAW sequencer not running

Vavra:

- [Imp] Mixer balance knobs now reset to center instead of total left

- [Fix] Arpeggiator stopped while DAW sequencer not running

Xenia:

- [Fix] Typos in play parameter names (mkruselj)
- [Fix] Arp not working in Multi mode
- [Fix] Arpeggiator stopped while DAW sequencer not running

1.3.19

Framework:

- [Imp] Patch Manager: Added options to reveal a datasource in the default
        File Browser of the OS

- [Fix] CLAP: Ranges of discrete parameters were not reported properly, 
        causing automation issues
- [Fix] Context menu for text edit fields was twice as large as intended
- [Fix] LV2 plugins were packaged into a a Unix like subfolder for Mac/Win

Osirus:

- [Fix] FX settings were not restored in Multi Mode
- [Fix] Too many waveforms displayed for Oscillator 1/2

Xenia:

- [Imp] MW1 card dumps are now supported in Patch Manager

- [Fix] UI not updating when loading DAW preset
- [Fix] Play Parameters didn't show the bound parameter value while being 
        adjusted
- [Fix] Play Parameter knobs didn't adapt range of bound parameter

NodalRed2x:

- [Imp] Added Performance & Global settings page
- [Imp] Added support for physical MIDI ports
- [Imp] Added support for .nl2 patch dump format that includes patch names

- [Fix] MIDI Program Change messages caused corrupted audio

1.3.18

Framework:

- [Imp] Physical MIDI port selection is now stored per instance

- [Fix] Physical MIDI ports were not opened before GUI was opened

NodalRed2x:

- [Imp] Implement Morph parameters / VM Map button
- [Imp] Implement Master Volume
- [Imp] Implement Arp Toggle LED/Button
- [Imp] Implement Octave LED

- [Fix] Do not attempt to boot a rom that is not for N2x

Vavra:

- [Imp] Physical MIDI in/out can now be selected via global context menu

Xenia:

- [Fix] Do not expose parameters for parts 9-16 as the machine only has 8
- [Fix] Physical MIDI in/out port selectors didn't work
- [Fix] LFO 2 rate knob in sync mode adjusting LFO 1 instead of LFO 2

1.3.17 (2024.08.04)

Framework:

- [Imp] Patch Manager: Added grid layout, you can switch between list and 
        grid layout via context menu

- [Fix] LV2 plugins were packaged incorrectly (#199)

Vavra:

- [Fix] Font when renaming a patch was too large
- [Fix] Microcontroller timing

Xenia:

- [Imp] Added support for MW1 bank dumps, i.e. one sysex with 
        multiple patches

- [Fix] Font when renaming a patch was too large
- [Fix] Microcontroller timing
- [Fix] Multi parameters were not initialized correctly
- [Fix] Global channel was not initialized to channel 1 which might have
        caused issues depending on the used firmware

1.3.16 (2024.07.14)

Framework:

- [Fix] Patch Manager: Last selected patch was not always restored properly

Vavra:

- [Imp] Performance improvements

- [Fix] Do not crash on right click in device skin
- [Fix] Reset filter keytrack to 0% on double click, not -200%

Xenia:

- [Imp] Performance improvements
- [Imp] Added support for MW1 patches
- [Imp] FX delay times are now displayed as note length + BPM as on hardware

- [Fix] Initial state of Multi Mode button was always off even though the device
        might have booted with Multi Mode enabled
- [Fix] Part selection was not reset to part 1 if switched from Multi to Single
        mode

1.3.15 (2024.07.06)

Framework:

- [Imp] Patches can now be imported via drag & drop. You can drag .mid, .syx, 
        .vstpreset, .fxb, .fxp files into the plugin to load them. You can drop
        patches on a part to load them directly, drop them on the patch manager
        data sources to add them as new source or drop them onto the user banks
        area to add a new user bank or add them to an existing one
- [Imp] Patches can now be dragged to external applications or the desktop. This
        will export MIDI files. You can drag parts, data sources or an arbitrary
        number of selected patches from the patch list
- [Imp] You can now drag parts from one instances to a part of another instance
        of the same plugin kind to copy/paste patches across instances
- [Imp] The patch of the currently selected part can now be copied & pasted via 
        Ctrl/Cmd C/V or via context menu. This copying is text based so that you 
        can share presets easily in forums etc.
- [Imp] A data source can now be dragged onto tags to modify all patches at once
- [Imp] Parameters now have their own context menu. In this context menu you can:
        - Lock/unlock a region
        - Copy/paste a region
        - Link/unlink regions across parts
- [Imp] Added parameter linking across parts. If you link a region of a part to 
        another part, knob movements/automation data/MIDI controls for the 
        source part are forwarded to all parts linked. This eases automation
        for layered instruments
- [Imp] Region locks are now per part instead of being global
- [Imp] Region locks are indicated by displaying an overlay next to each locked
        parameter.
- [Imp] Rotaries operated via mouse wheel now increment/decrement in single 
        steps while shift is pressed
- [Imp] Tooltip duration shortened to 1.5 seconds (mkruselj)
- [Imp] Parameter tooltips are now constrained to the plugin window (mkruselj)

- [Fix] Patch export as .mid created broken midi files
- [Fix] Corrupted data was sent to physical midi output (if selected) at plugin startup
- [Fix] Parameter change information in LCDs and tooltips were flickering if one knob
        was modified via mouse while another one was modified via automation or MIDI

Osirus/OsTIrus:

- [Imp] Added support to read presets from .vtibackup files in patch manager
- [Imp] Support extraction of multiple preset formats from a single file, e.g. if a
        Cubase .cpr is used as data source, both TI and Powercore presets are now
        extracted

- [Fix] MIDI Control Change "Bank Select MSB" destroyed the active preset, causing 
        it to sound different when reloaded
- [Fix] A MIDI feedback could occur between emulator and hardware connected via physical
        MIDI ports
- [Fix] Remote control via hardware was not possible if hardware is running in Single 
        mode and Page A parameters were sent as control changes
- [Fix] Editor didn't update knobs if parameters are modified via MIDI control changes 
        by using the physical midi input port
- [Fix] Patch Manager: Categories might be empty and plugin crashes when loading a patch

OsTIrus:

- [Fix] Arpeggiator pattern was always displayed for part 1 regardless of part selection
- [Fix] Modulation sources "Filter Envelope" and "LFO2 Unipolar" didn't work/were swapped

Osirus:

- [Imp] Add support for Virus A .mid OS update firmware file

Vavra/Xenia:

- [Imp] Added support for lock regions

- [Fix] Excessive parameter changes were sent to host when loading a preset

Vavra:

- [Fix] Filter mod amount values displayed unsigned values even though the parameter
        is signed
- [Fix] Patch Manager related options were not shown when pressing the 'Save' button

Xenia:

- [Imp] UI polishing in various areas (mkruselj)
- [Imp] Improve parameter names & values (mkruselj)
- [Imp] Added buttons to the top section to select the previous/next patch

1.3.14

Framework:

- [Imp] Rename "db" to "dB" in all gain context menus (mkruselj)
- [Imp] Column breaks for dropdown menu based parameters improved (mkruselj)
- [Imp] Selecting the same skin again reloads it, useful for skin
        developers (mkruselj)

Patch Manager:

- [Fix] Typo "Deleted Selected" in patch context menu (mkruselj)

OsTIrus:

- [Imp] Modulation Destinations are now sorted

Vavra:

- [Imp] Update default/reset values for various parameters (mkruselj)
- [Imp] Adjust naming of various labels (mkruselj)

- [Fix] MC68331 thread was not set to high priority

Xenia:

- [Imp] Adjusted/improved parameter value lists and default values (mkruselj)
- [Imp] Filter "Extra" parameter label is updated according to the selected 
        filter type (mkruselj)
- [Imp] Adjust various labels to match hardware naming (mkruselj)
- [Imp] Add support for Microwave 1 patches.
- [Imp] Added tag "MW Model" with tags for MW1 and MW2(/XT(k))

- [Fix] Left/Right channels reversed (mkruselj)
- [Fix] MC68331 thread was not set to high priority
- [Fix] Midi In/Out selectors had Filter 1 Type parameter attached

1.3.13

Framework:

- [Imp] Added warning message if running under Rosetta as performance will be bad
- [Imp] Added 'Panic' menu to send All Notes Off / reboot device

- [Fix] Do not crash if a skin cannot be loaded

Patch Manager:

- [Imp] Added context menu setting to hide duplicates by name
- [Imp] Added options to add/remove patches to/from tags, categories & favourites 
        via context menu
- [Imp] "Save" buttons now have more options: Allow to save to any 
        existing user bank or create a new one automatically if there is none yet
- [Fix] Name of user bank not displayed in patch information panel
- [Fix] Fix possible crash when loading cache
- [Fix] List ordering incorrect when being loaded from cache
- [Fix] Tags/Favourites got lost in some circumstances

Osirus:

- [Imp] Added support for Virus Rack and Rack XL OS via .mid file

- [Fix] Older Virus B firmware 4.58 failed to load
- [Fix] Patch Manager: Factory presets were not refreshed when ROM is switched

Osirus/OsTIrus:

- [Imp] Allow to select global midi channel via context menu if not in Multi Mode

OsTIrus:

- [Fix] Removed Tone knob for Curry & Chili overdrive modes as it doesn't have any effect
- [Fix] Oscillator 2 Interpolation & Local Detune knobs were swapped
- [Fix] Removed delay mode parameter from tape delays
- [Fix] Midi Controller 40 displayed Vocoder Carrier Center Frequency instead of Cutoff 
        in LCD
- [Fix] LCD text was not properly vertically centered

Vavra:

- [Fix] Modulation Slot amounts didn't reset to center on double click
- [Fix] Remove unused "Factory" category from patch manager as Vavra doesn't contain
        any factory presets

1.3.12

Framework:

- [Fix] VST3 plugins were rejected by some hosts on macOS

OsTIrus:

- [Imp] Add ability to turn off pulsating logo animation, either click on the logo or
        toggle it via context menu

- [Fix] Delay Time knob is now disabled if not applicable
- [Fix] Invalid bytes embedded in sysex messages
- [Fix] Some patch parameters might have shown incorrect values after copying a part

Vavra:

- [Fix] Invalid sysex messages sent to plugin midi output

1.3.11

Framework:

- [Imp] Added disclaimer about ROM usage
- [Imp] Add warning message if a Midi port cannot be opened because it is already in use
- [Imp] Third-party skins are now expected to be in a folder that is named like the plugin:
        skins_PlugName, for example skins_Osirus.
        Currently selected skins are still loaded and you can export the current skin to
        disk to create the new folder automatically. Move other skins to the new
        folder manually.

Patch Manager:

- [Imp] Database is now cached so subsequent loads are faster. If a datasource needs to be
        updated, right click and select "Refresh" to force a rescan
- [Imp] Added a default text "Search..." to search boxes independent from the used skin
- [Imp] Allow to add multiple files/folders at once when adding datasources

- [Fix] Info about selected patch not updated when patch renamed or tags modified

Osirus/OsTIrus:

- [Imp] Adjusted default Master Volume to 92 to match the TI hardware in USB mode

- [Fix] Plugin may crash if a patch data source folder contains files not belonging to presets

OsTIrus:

- [Fix] Midi indicators on parts blocked mouse clicks, making it difficult to select a part
- [Fix] Added missing Reverb Predelay knob if predelay clock is set to Off
- [Fix] Removed invalid entry in Arp clock selection
- [Fix] Do not crash if no ROM is found

1.3.10

Vavra:

- [Fix] AU validation got stuck
- [Fix] LCD color being fully transparent if not specified in skin

Osirus/OsTIrus:

- [Fix] Part volume knob for part 1 was bound to selected part instead of part 1
- [Fix] Selecting a ROM preset via part drop down didn't work after switching to
        another ROM

OsTIrus:

- [Fix] Corrupted audio on ARM CPUs
- [Fix] Soft Knob 3 destination wasn't loaded from existing patches

1.3.9

DSP:

- [Imp] Small performance optimizations

- [Fix] DSP thread not set to high priority on Mac/Linux

Framework:

- [Imp] Upgraded Juce to version 7.0.10
- [Imp] Plugin window can now have an arbitrary size by dragging the bottom right corner
- [Imp] Added support for the LV2 plugin format
- [Imp] Added options to Save button to allow storing the current preset in a user bank

- [Fix] VST3 packaging corrected for Windows & Linux to match specification as stated at
        https://steinbergmedia.github.io/vst3_dev_portal/pages/Technical+Documentation/Locations+Format/Plugin+Format.html
- [Fix] Patch Manager: Failed to parse folder that contains UTF-8 characters
- [Fix] Patch Manager: Selection was not updated when a part is saved to a user bank
- [Fix] Knob movement via mouse wheel didn't update automation & parameter display

Osirus/OsTIrus:

- [Imp] Multiple ROMs are now supported. The ROM can be chosen from the dropdown, the
        selected ROM is saved in the DAW plugin state. Note that the ROM content
        is not saved, only the filename. If the ROM cannot be found when reopening
        a project, the first one that is found is used instead.
- [Imp] Added support for Virus A

- [Fix] Crash if preset is selected in Single mode while parameters are locked
- [Fix] Part Volume knob did not work in Single mode

OsTIrus:

- [Imp] Reduced host CPU consumption
- [Imp] Soft Knobs are now implemented
- [Imp] Add ability to switch between TI2 and TI Snow
- [Imp] Added LFO LEDs (TI2 only, because the Snow doesn't have LFO LEDs)
- [Imp] Added part activity indicator LEDs
- [Imp] Added pulsating Logo animation that existed on the hardware too
- [Imp] GUI: Added Snow Logo on Snow Device / added Snow part view
- [Imp] Added Master Volume in Common Section
- [Imp] Added Arp user pattern visualization

- [Fix] Notes were dropped when the DSP reached its internal maximum of 55 voices
        Note that this behaviour can still occur if you overclock the DSP. There is
        currently no way around it if the firmware is not patched
- [Fix] Some patches generated corrupted audio, for example 'AoilioA BC'
- [Fix] Chorus Mix and Chorus Mix 2 had the same automation name
- [Fix] Hyper Chorus did not work
- [Fix] Various GUI issues in FX sections Distortion, Characters, Chorus, Filterbank, Reverb
- [Fix] Cutoff 2 is reset to center on double click instead of max
- [Fix] Fixed typo in Matrix Section
- [Fix] Performance issues when tweaking knobs

microQ:

- [Fix] Added missing Attack Level parameter that was missing for all envelopes

1.3.8 (2024.03.11)

DSP:

- [Imp] Small performance improvements

Framework:

- [Imp] Second click on root tree items of category tree deselects the item
- [Imp] Patch Manager: "Uncategorized" has been moved into the Categories group

- [Fix] Patch Manager: Missing patches if a directory contains files with unicode characters

OsTIrus:

- [Imp] Reported latency slightly adjusted for better midi timing

- [Fix] Part Detune knob displayed incorrect value and didn't update while being moved

- [Imp] Reset Oscillator shape to Saw on double click

1.3.7

Framework:

- [Imp] Patch Manager: A category can now be deselected via second mouse click to remove 
                       any category filter
- [Imp] Patch Manager: Root tree items (Factory Patches, Datasources) are no longer 
                       auto-expand upon load
- [Imp] Patch Manager: data source names are now shortened

- [Imp] Inform that changing plugin latency blocks while being in use might cause synchronization
        problems

- [Fix] Patch Manager: No error message was displayed if a user bank cannot be written to disk
- [Fix] Patch Manager: It was not possible to add presets to a newly created tag until another
                       data source was selected

Osirus/OsTIrus:

- [Imp] Disabled poly pressure to control Page B parameters to prevent accidental patch changes 
        by keyboards that emit MPE messages
- [Fix] Locking parameter regions didn't work properly on older version presets and may 
        have caused silence or invalid presets

OsTIrus:

- [Imp] Device samplerate of 48 Khz is now supported, previously only 44,1 KHz was used for the
        Emulation. If 44,1 KHz or 48 Khz is used is automatically determined based on the
        host samplerate.
- [Imp] The DSP code supports more samplerates than the hardware device was able to handle and
        ranges from 32 Khz to 96 Khz. The samplerate can be overwritten in the advanced options 
        context menu. The chosen samplerate is preserved as part of the plugin state.
        Note that higher samplerates may reduce the voice count if the DSP is not overclocked.
- [Imp] Added Master Volume knob to common page

- [Fix] Classic Oscillator waveform names were shifted by one
- [Fix] Added missing Modulation Matrix Destinations
- [Fix] Oscillator 2 FM Amount not shown in percent but as values 0-127
- [Fix] Delay/Tape Delay Feedback displayed wrong percentage values
- [Fix] Comb Filter Frequency did not display note numbers but percentage values

1.3.6 (2024.03.03)

DSP:

- [Imp] Performance improvements

- [Fix] Crash on x86 processors in various circumstances

Framework:

- [Fix] PatchManager: Edit field not refreshing text while typing in some hosts when adding 
        a user bank or favourite

Osirus:

- [Fix] Crash when loading Virus B OS 4.58

1.3.5 (2024.03.01)

DSP:

- [Imp] Reduced host memory consumption
- [Imp] Performance improvements

Framework:

- [Imp] Patch Manager: Add "Locate" context menu entry for patch to select the data source that contains it

Osirus/OsTIrus:

- [Fix] It was not possible to select a part preset via left-click menu on macOS

OsTIrus:

- [Fix] GUI displayed parts as disabled in multi mode if any other part than the first one was selected
- [Fix] B/C presets failed to load via patch manager
- [Fix] B/C presets stored to a user bank might sound incorrect after load
- [Fix] Plugin may hang if large buffer sizes are used
- [Fix] AU validation failed if TI rom was present

Vavra:

- [Imp] LCD text color can now be adjusted via skin (export included skin and search
        for "lcdTextColor" in json)

- [Fix] Phase of input was not correct

1.3.4 (TBD)

DSP:

- [Imp] Small performance improvements when JIT compiler needs to recompile code

Framework:

- [Imp] Patch Manager: Add tooltip for data source to show the full path in case its cut off
- [Imp] Patch Manager: Columns can now be resized by dragging
- [Imp] The DSP can now be underclocked/overclocked via context menu between 50% and 200%. This is
        an advanced setting that needs to be confirmed before activation

- [Fix] Patch Manager: Fix subfolders not enumerated on Mac & Linux
- [Fix] Add missing .vstpreset, .fxb and .cpr file extensions to file selector when loading a patch via "Load" button
- [Fix] Parameter value change by double-click on knob to reset it was not sent to host for automation
- [Fix] Linked parameters confused Bitwig / Ableton and other hosts
- [Fix] Long plugin loading times in some hosts due to excessive initial parameter automation updates
- [Fix] Part context menu and global context menu opened at the same time on right click

OsTIrus:

- [Imp] Removed ROM banks that are empty anyway
- [Imp] GUI has been reworked slightly and many GUI related issues have been fixed
- [Fix] Cutoff, Filter Env by Velocity and Filter Resonance by Velocity were linked 
        when Filter Link is active

Vavra:

- [Fix] Possible crash in midi processing code

Osirus:

- [Imp] Parameter regions can now be locked/unlocked via a context menu. Locked parameters do not change
        when a preset is loaded. This is useful for example if you want to keep an Arp pattern
        while searching for a preset, etc.

Osirus/OsTIrus:

- [Imp] Added output gain adjustment to context menu (already present in Vavra before)
- [Imp] The Midi Receive Channel of a part in Multi Mode can now be adjusted by right clicking on the part select button
- [Imp] Patch Manager: Allow to drag & drop patches from patch list to part slots
- [Imp] Patches can now be copied to other parts via drag & drop
- [Imp] Parameter regions can now be locked/unlocked via a context menu. Locked parameters do not change
        when a preset is loaded. This is useful for example if you want to keep an Arp pattern
        while searching for a preset, etc.

1.3.3 (2024.02.07)

- [Imp] Patch Manager added. The patch manager replaced the old preset browser and provides a modern 
        user experience to manage presets.
        Introduction:  https://dsp56300.wordpress.com/2024/02/06/patch-manager-introduction/

Osirus:

- [Imp] Support more file formats to load presets from. All supported formats now are:
       .syx/.mid Virus A/B/C/TI/TI2 preset dumps
       .fxb/.vstpreset Presets saved by DAW from Virus Powercore and Virus TI Control Software
       .cpr Cubase Project Files
       .mid Virus A/B/C OS Update files that include Factory Presets

- [Fix] Virus A presets from a very old firmware failed to load

1.2.25 (2023.01.08)

- [Imp] DSP56300 plugins are now also available in CLAP plugin format

- [Fix] Preset export created incorrect preset if exported from any part but the first
- [Fix] Multi controls (part volume & pan) did not respond anymore after switching the active part and displayed incorrect values
- [Fix] Performance issues when using automation
- [Fix] Controls may have displayed incorrect values if a preset was loaded from an older Virus version
- [Fix] Do not attempt to process invalid Single Dump SysEx message the part number is invalid
- [Fix] Possible Audio Input crackling issues (Depending on the host sample rate)

1.2.24 (2022.12.16)

- [Fix] AU validation failed on MacOS (1.2.23 regression)
- [Fix] Incorrect waveform labels for Oscillator 1 & 2 (Wave 2-63 => Wave 3-64)

1.2.23 (2022.12.12)

- [Imp] Faster startup time
- [Fix] Fix delay/reverb and other global or part specific parameters to work incorrectly (1.2.22 regression)

1.2.22 (2022.12.08):

Osirus:
- [Imp] LCD parameter changes are now also displayed for Dropdown Menus, Toggle Switches or when modified via Midi or Automation
- [Imp] Parameter link toggle switches now work as intended

- [Fix] Fix GUI scaling issues on various platforms / hosts
- [Fix] Fix weird sizes of popup menus
- [Fix] Do not open our own popup menu when right clicking while editing the patch name

1.2.21 (2022.12.06):

Osirus:
- [Imp] ROM file will now also be found if put next to the binary in the component folder (VST3 and AU builds)
- [Imp] Prev/Next buttons now select preset browser patches instead of ROM patches if a preset browser patch was selected last
- [Imp] More save options have been added, either save one Single, or the current arrangement (if in Multi mode) or a whole bank
- [Imp] All save options now support saving as either .syx or as .mid

- [Fix] Plugin may not emit any sound after the plugin state was restored (if part of a previously saved project)
- [Fix] Some UI elements didn't update their state correctly
- [Fix] UI may send incorrect control changes back to DSP after changing patches
- [Fix] Loading multiple Singles via bank load (file with more than one Single) didn't load all Singles but only the last one
- [Fix] GUI related crash after switching skins
- [Fix] Latency setting was not applied before editor opened

Test Console:
- Fix demo song couldn't be loaded from ROM

DSP:
- Performance improvements (5-10%)
- Stability improvemens
- Large speedup of code (re)generation. Results in faster startup time, reduces hiccups in Multi mode and when changing patches

1.2.20 (2022.07.29):

- [Imp] Performance has improved by 10% - 20% depending on the use case
- [Imp] Additional performance improvements by reducing the amount of dynamic code that has to be rebuilt. Improves Multi Mode and Demo Playback
- [Imp] Pure Tuning can now be adjusted in global settings (Hoverland skin only), thanks to @samstaton

- [Fix] The 128 RAM Multis are now stored in plugin state, fixes #110
- [Fix] Parameter "Assign 4 Amount" displayed values from 0 to 127 instead of -64 to +63, fixes #99
- [Fix] Preset prev/next buttons do not work before a preset is selected via dropdown menu, fixes #98
- [Fix] Unusual install location on linux, now /usr/local/lib/vst(3) is used, fixes #87

1.2.19 (2022.05.25):

- [Fix] Preset changes were discarded because the last selected patch browser preset was always loaded when opening UI

1.2.18 (2022.05.23):

- [Imp] Multichannel output support, the plugin now exposes three stereo outputs to the DAW
- [Imp] Remember last used file & patch in patch browser
- [Imp] Add ability to adjust plugin latency
- [Imp] Performance improvements
- [Imp] [Galaxpel Skin] integrate latest improvements by @galaxpel, thx a lot!
- [Imp] Add support for generic tab groups to allow skins to use different tab layouts or none at all. Export one of the integrated ones to see how it works.

- [Fix] [Hoverland Skin] many knobs were not bipolar even though they should (thx to ylmrx)
- [Fix] Preset version not always detected correctly in patch browser list
- [Fix] Possible latency issue for the FX version

1.2.17 (2022.04.07):

- [Fix] Reported latency values slightly adjusted, now different for FX and Synth versions of plugins
- [Fix] [UI Trancy] Osc 3 Wave Select not working, modifies Osc 1 Wave Select instead
- [Fix] [UI Hoverland/Galaxpel] Missing Reverb Room Type selection
- [Fix] Knobs modified multiple parts in Multi Mode after switching the active part several times
- [Fix] Hovering knobs always displayed values for part 1 even if another part was selected
- [Fix] Oscillator Semitone knobs had a range larger than supported by the hardware, now limited to -48 ... +48
- [Fix] Initial state of play mode selectors always displayed Single even when plugin restored in Multi mode

1.2.16 (2022.04.04):

- [Imp] Included the skin by @galaxpel#1604 

- [Fix] Adjusted reported latency after having done some more precise measurements
- [Fix] Fix DSP emulation JIT compiler issue resulted in corrupted sound

1.2.15 (2022.03.26):

- [Fix] Skin files were not correctly loaded from disk
- [Fix] [UI Hoverland] LFO3 destination was a duplicate of LFO2 destination
- [Fix] [UI Hoverland] MidEQ Gain & Freq were duplicates of LowEQ Gain & Freq
- [Fix] [UI Trancy] Broken Part Volume & Pan knobs

1.2.14 (2022.03.25):

- [Imp] Performance improved in some circumstances when JIT compiler had to regenerate code
- [Imp] Drop down menus with lots of entries now use multiple columns

- [Fix] UI skins were not found on disk (Mac/Linux)
- [Fix] [UI Trancy] Size of some labels reduced to be able to display more text
- [Fix] [UI Trancy] Unison Mode switch did not work

1.2.13 (2022.03.23):

UI only release

The UI system has been rewritten and is now data-driven which allows custom skins.

Some smaller changes & improvements have been integrated while reimplementing the UI

- Debug-style drop down boxes in the upper left corner have been removed and replaced by a right-click context menu
- UI base scale has been adjusted so that both skins have about the same size
- The current skin can be exported to disk by right clicking and selecting "Export" in the context menu
- Additional skins that are found in the "skins" folder next to the plugin can be selected in the context menu
- Focused parameters now display the correct text instead of displaying a generic value of 0-127

Hoverland skin specific:
- Debug-style Single/Multi play mode switch buttons have been replaced with better graphics
- Version number & Donate Info have moved to the bottom and use the skin text color
- The duplicated Presets tab has been removed as a presets button was already there
- The info about the loaded ROM has been moved to the upper right and is prepared for runtime ROM switching (not implemented yet)
- Physical MIDI port selection has moved to the global page

1.2.12 (2022.03.17):

- [Imp] Both skins are now part of one plugin, the skin can be switched from a drop down menu in the upper left corner

- [Fix] AU validation failed on Mac
- [Fix] Virus Powercore banks failed to load
- [Fix] Toggle switches displayed the opposing state (Suboscillator Type, LFO Poly/Mono switches)
- [Fix] Small Hoverland UI tweaks

1.2.11 (2022.03.10):

- [Imp] The plugin is now available as FX unit. The FX unit has a different plugin ID so both can be used at the same time
- [Imp] Dark skin is now included in official builds, thanks to @trancy for creating the skin
- [Imp] Added linux builds for aarch64 aka ARMv8

- [Fix] Rewritten midi clock code to fix various out-of-sync-issues for arps, delays, etc
- [Fix] drop downs for Reverb Room Type and Delay LFO Type displayed too many entries

1.2.10 (2022.03.04):

- [Imp] UI knobs now react to parameter changes via Midi Control Change, Poly Pressure and Sysex
- [Imp] Patches loaded via "Load" button that only contain a single preset are now loaded to the edit buffer of the selected part
- [Imp] Emulation performance improvements (5% - 10%)

- [Fix] Presets were not always loaded correctly
- [Fix] Loading of presets didn't (properly) update the UI
- [Fix] Patch Browser failed to load some midi file which resulted in no presets being displayed
- [Fix] Patch Browser didn't display the proper Virus Model in all circumstances
- [Fix] Midi bank select (sent as Midi CC) was off-by-one in single mode
- [Fix] Part bank select and part program change (as sysex) didn't work for single mode
- [Fix] Various midi clock issues due to midi clock start event being missing
- [Fix] "Assign3 Destination3" was named "Assign2 Destination3" (automation name)
- [Fix] "Assign3 Amount3" was named "Assign2 Amount3" (automation name)
- [Fix] Osc 1 & 2 Wave Select parameter was off-by-one
- [Fix] Key follow base UI element not working
- [Fix] Do not crash when attempting to load a preset that is not a Virus preset

1.2.6 (2022.02.26):

- [Imp] UI knobs now react to parameter changes via Midi Control Change, Poly Pressure and Sysex
- [Imp] Patches loaded via "Load" button that only contain a single preset are now loaded to the edit buffer of the selected part
- [Imp] Emulation performance improvements (5% - 10%)

- [Fix] Presets were not always loaded correctly
- [Fix] Loading of presets didn't (properly) update the UI
- [Fix] Patch Browser failed to load some midi file which resulted in no presets being displayed
- [Fix] Patch Browser didn't display the proper Virus Model in all circumstances
- [Fix] Midi bank select (sent as Midi CC) was off-by-one in single mode
- [Fix] Part bank select and part program change (as sysex) didn't work for single mode
- [Fix] Various midi clock issues due to midi clock start event being missing
- [Fix] "Assign3 Destination3" was named "Assign2 Destination3" (automation name)
- [Fix] "Assign3 Amount3" was named "Assign2 Amount3" (automation name)
- [Fix] Osc 1 & 2 Wave Select parameter was off-by-one
- [Fix] Key follow base UI element not working
- [Fix] Do not crash when attempting to load a preset that is not a Virus preset

1.2.5 (2022.01.29):

- [Imp] Performance improvements between 5% - 10%
- [Imp] Additional performance improvements for ARMv8 based CPUs (including Apple M1)

- [Fix] CPU spikes in complex patches or multi mode
- [Fix] Part Select buttons were visually broken (always appeared as being selected)
- [Fix] Presets were stored with incorrect version number, causing Virus B & C features to be disabled by the DSP when being loaded (Reverb, Osc 3, EQ, ....)
- [Fix] Preset was corrupted when saving to an already existing file
- [Fix] Some presets caused the emu to crash

1.2.5b (2022.01.29):

- [Imp] Smaller general performance improvements
- [Imp] Additional performance improvements for ARMv8 based CPUs (including Apple M1)

- [Fix] Some presets caused the emu to crash

1.2.5a (2022.01.26):

- [Imp] Smaller general performance improvements
- [Imp] Additional performance improvements for ARMv8 based CPUs (including Apple M1)

- [Fix] CPU spikes in complex patches or multi mode
- [Fix] Part Select buttons were visually broken (always appeared as being selected)
- [Fix] Presets were stored with incorrect version number, causing Virus B & C features to be disabled by the DSP when being loaded (Reverb, Osc 3, EQ, ....)
- [Fix] Preset was corrupted when saving to an already existing file
- [Fix] Some presets caused the emu to crash

1.2.4c (2022.01.18):

- [Fix] Freezing of plugins for some seconds because DSP skipped processing peripheral devices in certain circumstances

1.2.4b (2022.01.18):

- [Fix] Possible crash at startup
- [Fix] Plugin doesn't emit any sound in some circumstances
- [Fix] Possible crash when closing editor window, reopening it and switching presets
- [Fix] Possible crash when invalid sysex message received
- [Fix] Memory leaks
- [Fix] Broken Combo Box selection
- [Fix] Preset name not being displayed after reopening editor window

1.2.4 (2022.01.18):

- [Imp] UI scale selector. Higher quality image assets for larger sizes will be included in a future release.
- [Imp] Name search in patch browser.
- [Imp] Show transpose column in patch browser.
- [Imp] Right click a directory in patch browser to dedupe and add all syx/midi files within to the patch list.
- [Imp] Mouse hover now shows parameter value.
- [Imp] Scroll wheel now cycles through combobox options.
- [Imp] DSP emulation code has been optimized and is now 10% to 20% faster

- [Change] Save preset location now defaults to the patch browsers last directory
- [Change] Multi-Single removed.
- [Change] In multi mode, FX are no longer applied when loading a patch. (previously they did on part 1 only)

- [Fix] Reverb/Delay now show correct controls for the selected mode.
- [Fix] Some parameters in UI showing wrong values in multi mode.
- [Fix] Moving parameters now sends automation to DAW.
- [Fix] Crash when loading second instance on some platforms.
- [Fix] Crash when removing track
- [Fix] Some better double click default values

1.2.3 (2022.01.14):

- [Imp] Add double click to edit preset name.
- [Imp] Add missing reverb controls. 
- [Imp] Connect unassigned GUI controls (Bend, Category, SoftKnob config, Input follower)
- [Imp] Control changes now show their value in the main display
- [Imp] Add Part Volume and part pan control
- [Imp] Add Multi-Single mode.
- [Imp] Add part output selection for main and aux buses.
- [Imp] Sync internal virus clock to host bpm
- [Imp] Patch Browser sorting by column headers
- [Imp] Flag for TI patches in browser.

- [Fix] Fix selected part not being remembered when reopening editor
- [Fix] Patch browser not switching if selected index doesn't change.
- [Fix] Double now click resets to to center instead of 0 on bipolar controls.
- [Fix] Matrix slot 4/5/6 not working on C rom.
- [Fix] Osc sync button
- [Fix] Crash when removing the track with GUI open in some DAWs.
- [Fix] Update some art assets

1.2.2 (2022.01.08):

- [Imp] First version that uses the new User Interface instead of the temporary one

1.2.1 (2022.01.03):

- [Change] Switch default play mode to Single
- [Imp] Add ability to load a sound bank via Midi/Sysex (thx to @balls)
- [Imp] Added native Midi ports support to allow to make it easier to use external editors for the emulator (thx to @balls)
- [Imp] Add ability to resize temporary UI (thx to @lol_catz)
- [Imp] Oscillator 3 Mode is now a dropdown menu instead of a Slider (thx to @lol_catz)

- [Fix] Fix presets sent via Sysex to Bank A were stored in Bank B
- [Fix] Fix parameter changes not remembered in single mode if sent for part 0
- [Fix] Fix master tune being off after reloading a project
- [Fix] Added missing distortion curves (thx to @balls)
- [Fix] Various parameter range or naming issues (thx to @lol_catz)

1.2.0 (2021.09.23):

- [Imp] A temporary GUI has been added that allows to: modify parameters without needing external editors and allows to switch presets 
- [Imp] All parameters can now be automated from a DAW

- [Fix] Sysex event processing is now more responsive
- [Fix] Version number displayed as x.yz instead of x.y.z

1.1.9 (2021.08.12):

- [Imp] An arm64 JIT recompiler has been implemented, which gives a large performance boost on Apple M1, Raspberry Pi and other arm64 based CPUs
- [Imp] Default Master Volume is now set to 127 instead of 100
- [Imp] Small performance improvements on x64

- [Fix] plugin did not remember Single/Multi mode switch
- [Fix] MIDI clock events confused DSP and corrupted other MIDI events, such as Pitch Bend and others.
- [Fix] ROM location search did not find any ROM in certain circumstances
- [Fix] state restore after reopening plugin sent default presets before sending the correct ones
- [Fix] plugin not responding to MIDI Sysex "Global Request"

1.1.8:

- Fix plugin failing AU validation on Mac OS
- Fix plugin getting stuck if block size is larger than 4096
- Small performance improvements in DSP code

1.1.7:

- MIDI: Support Global, Total, Arrangement and Controller Dump requests
- Plugin state is now saved in host/project. The saved state includes global parameters, the RAM banks A & B, the current Multi (in Multi mode) plus all Singles referenced by that Multi and the current Single in Single mode
- Plugin latency is now reported to host, fixes audio offsets when bouncing and other synchronization issues
- Fix midi timing when using large block sizes
- Fix possible FPU denormalization issue in resampling code causing high CPU load(Bearbeitet)
- Fix issue that may have caused CPU hickups when running host at 44,1 Khz or below
- Fix MIDI clock not forwarded to DSP when running in Single mode
