fcd.h

Go to the documentation of this file.

/* -*- c++ -*- */
/*
 * Copyright 2011-2013 Free Software Foundation, Inc.
 *
 * GNU Radio is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 3, or (at your option)
 * any later version.
 *
 * GNU Radio is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with GNU Radio; see the file COPYING.  If not, write to
 * the Free Software Foundation, Inc., 51 Franklin Street,
 * Boston, MA 02110-1301, USA.
 */
 
#ifndef INCLUDED_FCDPROPLUS_FCD_H
#define INCLUDED_FCDPROPLUS_FCD_H
 
#include <fcdproplus/api.h>
#include <gnuradio/hier_block2.h>
 
#include <string>
 
namespace gr {
  namespace fcdproplus {
 
    /*!
     * \brief Funcube Dongle source block.
     * \ingroup fcdproplus
     *
     * \details
     * This class provides a Funcube Dongle source block by wrapping
     * the USB audio interface and the USB HID control interface of
     * the Funcube Dongle into one convenient source block.
     *
     * The Funcube Dongle needs to have firmware 18f or later for the
     * control interface to work properly. As of early 2011, FCDs
     * still come with firmware 18b. You can use qthid 2.2 (not 3) to
     * upgrade the firmware: http://qthid.sf.net
     */
    class FCDPROPLUS_API fcd : virtual public gr::hier_block2
    {
    public:
      typedef boost::shared_ptr<fcd> sptr;
 
      /*!
       * \brief Return a shared_ptr to a new instance of fcd_source_c.
       *
       * \details
       * This is effectively the public constructor. To avoid accidental
       * use of raw pointers, fcd_source_c's constructor is private.
       * fcd_make_source_c is the public interface for creating new
       * instances.
       */
      static sptr make(const std::string device_name = "");
 
      /*! \brief Set frequency with Hz resolution.
       *  \param freq The frequency in Hz
       *
       * This is a convenience function that uses float parameter in
       * order to allow using engineering notation in GRC.
       *
       */
      virtual void set_freq(float freq) = 0;
 
 
      /*! \brief Set LNA gain.
       *  \param gain The new gain in dB.
       *
       * Set the LNA gain in the FCD. Valid range is -5 to
       * 30. Although the LNA gain in the FCD takes enumerated values
       * corresponding to 2.5 dB steps, you can can call this method
       * with any float value and it will be rounded to the nearest
       * valid value.
       *
       * By default the LNA gain is set to 20 dB and this is a good value for
       * most cases. In noisy areas you may try to reduce the gain.
       */
      virtual void set_lna_gain(float gain) = 0;
 
      /*! \brief Set mixer gain.
       *  \param gain The new gain in dB.
       *
       * Set the mixer gain in the FCD. Valid values are +4 and +12 dB.
       *
       * By default the mixer gain is set to +12 dB and this is a good
       * value for most cases. In noisy areas you may try to reduce
       * the gain.
       */
      virtual void set_mixer_gain(float gain) = 0;
 
      /*! \brief Set new frequency correction.
       *  \param ppm The new frequency correction in parts per million
       *
       * Version 1.1 FCDs (S/N 810 or later) need a correction of -12
       * ppm.  Earlier FCDs need roughly -120 ppm (default for
       * gr-fcd).
       *
       * Ref: http://www.funcubedongle.com/?p=617
       */
      virtual void set_freq_corr(int ppm) = 0;
 
      /*! \brief Set DC offset correction.
       *  \param _dci DC correction for I component (-1.0 to 1.0)
       *  \param _dcq DC correction for Q component (-1.0 to 1.0)
       *
       * Set DC offset correction in the device. Default is 0.0.
       */
      virtual void set_dc_corr(double _dci, double _dcq) = 0;
 
      /*! \brief Set IQ phase and gain balance.
       *  \param _gain The gain correction (-1.0 to 1.0)
       *  \param _phase The phase correction (-1.0 to 1.0)
       *
       * Set IQ phase and gain balance in the device. The default values
       * are 0.0 for phase and 1.0 for gain.
       */
      virtual void set_iq_corr(double _gain, double _phase) = 0;
    };
 
  } /* namespace fcd */
} /* namespace gr */
 
#endif /* INCLUDED_FCDPROPLUS_FCD_H */