Class JDBCPreparedStatement

java.lang.Object
org.hsqldb.jdbc.JDBCPreparedStatement
All Implemented Interfaces:
AutoCloseable, PreparedStatement, Statement, Wrapper
Direct Known Subclasses:
JDBCCallableStatement
public class JDBCPreparedStatement extends Object implements PreparedStatement
An object that represents a precompiled SQL statement.

A SQL statement is precompiled and stored in a PreparedStatement object. This object can then be used to efficiently execute this statement multiple times.

Note: The setter methods (setShort, setString, and so on) for setting IN parameter values must specify types that are compatible with the defined SQL type of the input parameter. For instance, if the IN parameter has SQL type INTEGER, then the method setInt should be used.

If arbitrary parameter type conversions are required, the method setObject should be used with a target SQL type.

In the following example of setting a parameter, con represents an active connection: 

  BigDecimal sal = new BigDecimal("153833.00");
  PreparedStatement pstmt = con.prepareStatement("UPDATE EMPLOYEES
                                    SET SALARY = ? WHERE ID = ?");
  pstmt.setBigDecimal(1, sal);
  pstmt.setInt(2, 110592);

HSQLDB-Specific Information:

From version 2.0, the implementation meets the JDBC specification requirement that any existing ResultSet is closed when execute() or executeQuery() methods are called. The connection property close_result=true is required for this behaviour.

JDBCPreparedStatement objects are backed by a true compiled parametric representation. Hence, there are now significant performance gains to be had by using a JDBCPreparedStatement object in preference to a JDBCStatement object when a short-running SQL statement is to be executed more than once.

When it can be otherwise avoided, it should be considered poor practice to fully prepare (construct), parameterize, execute, fetch and close a JDBCParameterMetaData object for each execution cycle. Indeed, because the prepare and execute phases both represent a round-trip to the engine, this practice is likely to be noticeably less performant for short-running statements (and possibly even orders of magnitude less performant over network connections for short-running statements) than the equivalent process using JDBCStatement objects, albeit far more convenient, less error prone and certainly much less resource-intensive, especially when large binary and character values are involved, due to the optimized parameterization facility.

Instead, when developing an application that is not totally oriented toward the execution of ad hoc SQL, it is recommended to expend some effort toward identifying the SQL statements that are good candidates for regular reuse and adapting the structure of the application accordingly. Often, this is done by recording the text of candidate SQL statements in an application resource object (which has the nice side-benefit of isolating and hiding differences in SQL dialects across different drivers) and caching for possible reuse the PreparedStatement objects derived from the recorded text.

Starting with 2.0, when built under a JDBC 4 environment, statement caching can be transparently enabled or disabled on a statement-by-statement basis by invoking setPoolable(true | false), respectively, upon Statement objects of interest.

Multi thread use:

A PreparedStatement object is stateful and should not normally be shared by multiple threads. If it has to be shared, the calls to set the parameters, calls to add batch statements, the execute call and any post-execute calls should be made within a block synchronized on the PreparedStatement Object.

(fredt@users)
(campbell-burnet@users)

Since:
JDK 1.1, HSQLDB 1.9.0
Author:
Campbell Burnet (campbell-burnet@users dot sourceforge.net), Fred Toussi (fredt@users dot sourceforge.net)
See Also:

  • Field Summary

    Fields inherited from interface Statement

    CLOSE_ALL_RESULTS, CLOSE_CURRENT_RESULT, EXECUTE_FAILED, KEEP_CURRENT_RESULT, NO_GENERATED_KEYS, RETURN_GENERATED_KEYS, SUCCESS_NO_INFO

  • Method Summary

    Modifier and Type
    Method
    Description
    void
    addBatch()
    Adds a set of parameters to this PreparedStatement object's batch of commands.
    void
    addBatch(String sql)
    This method should always throw if called for a PreparedStatement or CallableStatement.
    void
    cancel()
    Cancels this Statement object if both the DBMS and driver support aborting an SQL statement.
    void
    clearBatch()
    Empties this Statement object's current list of SQL commands.
    void
    clearParameters()
    Clears the current parameter values immediately.
    void
    clearWarnings()
    Clears all the warnings reported on this Statement object.
    void
    close()
    Does the specialized work required to free this object's resources and that of its parent class.
    void
    closeOnCompletion()
    Specifies that this Statement will be closed when all its dependent result sets are closed.
    boolean
    execute()
    Executes the SQL statement in this PreparedStatement object, which may be any kind of SQL statement.
    boolean
    execute(String sql)
    This method should always throw if called for a PreparedStatement or CallableStatement.
    boolean
    execute(String sql, int autoGeneratedKeys)
     
    boolean
    execute(String sql, int[] columnIndexes)
     
    boolean
    execute(String sql, String[] columnNames)
     
    int[]
    executeBatch()
    Submits a batch of commands to the database for execution and if all commands execute successfully, returns an array of update counts.
    long[]
    executeLargeBatch()
    Submits a batch of commands to the database for execution and if all commands execute successfully, returns an array of update counts.
    long
    executeLargeUpdate()
    Executes the SQL statement in this PreparedStatement object, which must be an SQL Data Manipulation Language (DML) statement, such as INSERT, UPDATE or DELETE; or an SQL statement that returns nothing, such as a DDL statement.
    ResultSet
    executeQuery()
    Executes the SQL query in this PreparedStatement object and returns the ResultSet object generated by the query.
    ResultSet
    executeQuery(String sql)
    This method should always throw if called for a PreparedStatement or CallableStatement.
    int
    executeUpdate()
    Executes the SQL statement in this PreparedStatement object, which must be an SQL Data Manipulation Language (DML) statement, such as INSERT, UPDATE or DELETE; or an SQL statement that returns nothing, such as a DDL statement.
    int
    executeUpdate(String sql)
    This method should always throw if called for a PreparedStatement or CallableStatement.
    int
    executeUpdate(String sql, int autoGeneratedKeys)
    Statement methods that must be overridden in this class and throw an exception.
    int
    executeUpdate(String sql, int[] columnIndexes)
     
    int
    executeUpdate(String sql, String[] columnNames)
     
    Connection
    getConnection()
    Retrieves the Connection object that produced this Statement object.
    int
    getFetchDirection()
    Retrieves the direction for fetching rows from database tables that is the default for result sets generated from this Statement object.
    int
    getFetchSize()
    Retrieves the number of result set rows that is the default fetch size for ResultSet objects generated from this Statement object.
    ResultSet
    getGeneratedKeys()
    Retrieves any auto-generated keys created as a result of executing this Statement object.
    long
    getLargeMaxRows()
    Retrieves the maximum number of rows that a ResultSet object produced by this Statement object can contain.
    long
    getLargeUpdateCount()
    Retrieves the current result as an update count; if the result is a ResultSet object or there are no more results, -1 is returned.
    int
    getMaxFieldSize()
    Retrieves the maximum number of bytes that can be returned for character and binary column values in a ResultSet object produced by this Statement object.
    int
    getMaxRows()
    Retrieves the maximum number of rows that a ResultSet object produced by this Statement object can contain.
    ResultSetMetaData
    getMetaData()
    Retrieves a ResultSetMetaData object that contains information about the columns of the ResultSet object that will be returned when this PreparedStatement object is executed.
    boolean
    getMoreResults()
    Moves to this Statement object's next result, returns true if it is a ResultSet object, and implicitly closes any current ResultSet object(s) obtained with the method getResultSet.
    boolean
    getMoreResults(int current)
    Moves to this Statement object's next result, deals with any current ResultSet object(s) according to the instructions specified by the given flag, and returns true if the next result is a ResultSet object.
    ParameterMetaData
    getParameterMetaData()
    Retrieves the number, types and properties of this PreparedStatement object's parameters.
    org.hsqldb.result.ResultMetaData
    getParameterMetaDataDirect()
     
    int
    getQueryTimeout()
    Retrieves the number of seconds the driver will wait for a Statement object to execute.
    ResultSet
    getResultSet()
    Retrieves the current result as a ResultSet object.
    int
    getResultSetConcurrency()
    Retrieves the result set concurrency for ResultSet objects generated by this Statement object.
    int
    getResultSetHoldability()
    Retrieves the result set holdability for ResultSet objects generated by this Statement object.
    JDBCResultSetMetaData
    getResultSetMetaData()
     
    int
    getResultSetType()
    Retrieves the result set type for ResultSet objects generated by this Statement object.
    String
    getSQL()
     
    long
    getStatementID()
     
    int
    getUpdateCount()
    Retrieves the current result as an update count; if the result is a ResultSet object or there are no more results, -1 is returned.
    SQLWarning
    getWarnings()
    Retrieves the first warning reported by calls on this Statement object.
    boolean
    isClosed()
    Retrieves whether this Statement object has been closed.
    boolean
    isCloseOnCompletion()
    Returns a value indicating whether this Statement will be closed when all its dependent result sets are closed.
    boolean
    isPoolable()
    Returns a value indicating whether the Statement is poolable or not.
    boolean
    isRowCount()
     
    boolean
    isWrapperFor(Class<?> iface)
    Returns true if this either implements the interface argument or is directly or indirectly a wrapper for an object that does.
    void
    setArray(int parameterIndex, Array x)
    Sets the designated parameter to the given java.sql.Array object.
    void
    setAsciiStream(int parameterIndex, InputStream x)
    Sets the designated parameter to the given input stream.
    void
    setAsciiStream(int parameterIndex, InputStream x, int length)
    Sets the designated parameter to the given input stream, which will have the specified number of bytes.
    void
    setAsciiStream(int parameterIndex, InputStream x, long length)
    Sets the designated parameter to the given input stream, which will have the specified number of bytes.
    void
    setBigDecimal(int parameterIndex, BigDecimal x)
    Sets the designated parameter to the given java.math.BigDecimal value.
    void
    setBinaryStream(int parameterIndex, InputStream x)
    Sets the designated parameter to the given input stream.
    void
    setBinaryStream(int parameterIndex, InputStream x, int length)
    Sets the designated parameter to the given input stream, which will have the specified number of bytes.
    void
    setBinaryStream(int parameterIndex, InputStream x, long length)
    Sets the designated parameter to the given input stream, which will have the specified number of bytes.
    void
    setBlob(int parameterIndex, InputStream inputStream)
    Sets the designated parameter to a InputStream object.
    void
    setBlob(int parameterIndex, InputStream inputStream, long length)
    Sets the designated parameter to a InputStream object.
    void
    setBlob(int parameterIndex, Blob x)
    Sets the designated parameter to the given java.sql.Blob object.
    void
    setBoolean(int parameterIndex, boolean x)
    Sets the designated parameter to the given Java boolean value.
    void
    setByte(int parameterIndex, byte x)
    Sets the designated parameter to the given Java byte value.
    void
    setBytes(int parameterIndex, byte[] x)
    Sets the designated parameter to the given Java array of bytes.
    void
    setCharacterStream(int parameterIndex, Reader reader)
    Sets the designated parameter to the given Reader object.
    void
    setCharacterStream(int parameterIndex, Reader reader, int length)
    Sets the designated parameter to the given Reader object, which is the given number of characters long.
    void
    setCharacterStream(int parameterIndex, Reader reader, long length)
    Sets the designated parameter to the given Reader object, which is the given number of characters long.
    void
    setClob(int parameterIndex, Reader reader)
    Sets the designated parameter to a Reader object.
    void
    setClob(int parameterIndex, Reader reader, long length)
    Sets the designated parameter to a Reader object.
    void
    setClob(int parameterIndex, Clob x)
    Sets the designated parameter to the given java.sql.Clob object.
    void
    setCursorName(String name)
    Sets the SQL cursor name to the given String, which will be used by subsequent Statement object execute methods.
    void
    setDate(int parameterIndex, Date x)
    Sets the designated parameter to the given java.sql.Date value using the default time zone of the virtual machine that is running the application.
    void
    setDate(int parameterIndex, Date x, Calendar cal)
    Sets the designated parameter to the given java.sql.Date value, using the given Calendar object.
    void
    setDouble(int parameterIndex, double x)
    Sets the designated parameter to the given Java double value.
    void
    setEscapeProcessing(boolean enable)
    Sets escape processing on or off.
    void
    setFetchDirection(int direction)
    Gives the driver a hint as to the direction in which rows will be processed in ResultSet objects created using this Statement object.
    void
    setFetchSize(int rows)
    Gives the JDBC driver a hint as to the number of rows that should be fetched from the database when more rows are needed for ResultSet objects generated by this Statement.
    void
    setFloat(int parameterIndex, float x)
    Sets the designated parameter to the given Java float value.
    void
    setInt(int parameterIndex, int x)
    Sets the designated parameter to the given Java int value.
    void
    setLargeMaxRows(long max)
    Sets the limit for the maximum number of rows that any ResultSet object generated by this Statement object can contain to the given number.
    void
    setLong(int parameterIndex, long x)
    Sets the designated parameter to the given Java long value.
    void
    setMaxFieldSize(int max)
    Sets the limit for the maximum number of bytes in a ResultSet Sets the limit for the maximum number of bytes that can be returned for character and binary column values in a ResultSet object produced by this Statement object.
    void
    setMaxRows(int max)
    Sets the limit for the maximum number of rows that any ResultSet object generated by this Statement object can contain to the given number.
    void
    setNCharacterStream(int parameterIndex, Reader value)
    Sets the designated parameter to a Reader object.
    void
    setNCharacterStream(int parameterIndex, Reader value, long length)
    Sets the designated parameter to a Reader object.
    void
    setNClob(int parameterIndex, Reader reader)
    Sets the designated parameter to a Reader object.
    void
    setNClob(int parameterIndex, Reader reader, long length)
    Sets the designated parameter to a Reader object.
    void
    setNClob(int parameterIndex, NClob value)
    Sets the designated parameter to a java.sql.NClob object.
    void
    setNString(int parameterIndex, String value)
    Sets the designated parameter to the given String object.
    void
    setNull(int parameterIndex, int sqlType)
    Sets the designated parameter to SQL NULL.
    void
    setNull(int parameterIndex, int sqlType, String typeName)
    Sets the designated parameter to SQL NULL.
    void
    setObject(int parameterIndex, Object x)
    Sets the value of the designated parameter using the given object.
    void
    setObject(int parameterIndex, Object x, int targetSqlType)
    Sets the value of the designated parameter with the given object.
    void
    setObject(int parameterIndex, Object x, int targetSqlType, int scaleOrLength)
    Sets the value of the designated parameter with the given object.
    void
    setObject(int parameterIndex, Object x, SQLType targetSqlType)
    Sets the value of the designated parameter with the given object.
    void
    setObject(int parameterIndex, Object x, SQLType targetSqlType, int scaleOrLength)
    Sets the value of the designated parameter with the given object.
    void
    setPoolable(boolean poolable)
    Requests that a Statement be pooled or not pooled.
    void
    setQueryTimeout(int seconds)
    Sets the number of seconds the driver will wait for a Statement object to execute to the given number of seconds.
    void
    setRef(int parameterIndex, Ref x)
    Sets the designated parameter to the given REF(<structured-type>) value.
    void
    setRowId(int parameterIndex, RowId x)
    Sets the designated parameter to the given java.sql.RowId object.
    void
    setShort(int parameterIndex, short x)
    Sets the designated parameter to the given Java short value.
    void
    setSQLXML(int parameterIndex, SQLXML xmlObject)
    Sets the designated parameter to the given java.sql.SQLXML object.
    void
    setString(int parameterIndex, String x)
    Sets the designated parameter to the given Java String value.
    void
    setTime(int parameterIndex, Time x)
    Sets the designated parameter to the given java.sql.Time value.
    void
    setTime(int parameterIndex, Time x, Calendar cal)
    Sets the designated parameter to the given java.sql.Time value, using the given Calendar object.
    void
    setTimestamp(int parameterIndex, Timestamp x)
    Sets the designated parameter to the given java.sql.Timestamp value.
    void
    setTimestamp(int parameterIndex, Timestamp x, Calendar cal)
    Sets the designated parameter to the given java.sql.Timestamp value, using the given Calendar object.
    void
    setUnicodeStream(int parameterIndex, InputStream x, int length)
    Deprecated.
    Use setCharacterStream
    void
    setURL(int parameterIndex, URL x)
    Sets the designated parameter to the given java.net.URL value.
    String
    toString()
    Retrieves a String representation of this object.
    <T> T
    unwrap(Class<T> iface)
    Returns an object that implements the given interface to allow access to non-standard methods, or standard methods not exposed by the proxy.

    Methods inherited from class Object

    equals, getClass, hashCode, notify, notifyAll, wait, wait, wait

    Methods inherited from interface Statement

    closeOnCompletion, enquoteIdentifier, enquoteLiteral, enquoteNCharLiteral, executeLargeUpdate, executeLargeUpdate, executeLargeUpdate, executeLargeUpdate, isCloseOnCompletion, isSimpleIdentifier

  • Method Details

    • executeQuery

      public ResultSet executeQuery() throws SQLException
      Executes the SQL query in this PreparedStatement object and returns the ResultSet object generated by the query.
      Specified by:
      executeQuery in interface PreparedStatement
      Returns:
      a ResultSet object that contains the data produced by the query; never null
      Throws:
      SQLException - if a database access error occurs; this method is called on a closed PreparedStatement or the SQL statement does not return a ResultSet object
      SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement

    • executeUpdate

      public int executeUpdate() throws SQLException
      Executes the SQL statement in this PreparedStatement object, which must be an SQL Data Manipulation Language (DML) statement, such as INSERT, UPDATE or DELETE; or an SQL statement that returns nothing, such as a DDL statement.
      Specified by:
      executeUpdate in interface PreparedStatement
      Returns:
      either (1) the row count for SQL Data Manipulation Language (DML) statements or (2) 0 for SQL statements that return nothing
      Throws:
      SQLException - if a database access error occurs; this method is called on a closed PreparedStatement or the SQL statement returns a ResultSet object
      SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement

    • setNull

      public void setNull(int parameterIndex, int sqlType) throws SQLException
      Sets the designated parameter to SQL NULL.

      Note: You must specify the parameter's SQL type.

      HSQLDB-Specific Information:

      HSQLDB currently ignores the sqlType argument.
      Specified by:
      setNull in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      sqlType - the SQL type code defined in java.sql.Types
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if sqlType is a ARRAY, BLOB, CLOB, DATALINK, JAVA_OBJECT, NCHAR, NCLOB, NVARCHAR, LONGNVARCHAR, REF, ROWID, SQLXML or STRUCT data type and the JDBC driver does not support this data type

    • setBoolean

      public void setBoolean(int parameterIndex, boolean x) throws SQLException
      Sets the designated parameter to the given Java boolean value. The driver converts this to an SQL BIT or BOOLEAN value when it sends it to the database.

      HSQLDB-Specific Information:

      HSQLDB supports BOOLEAN type for boolean values. This method can also be used to set the value of a parameter of the SQL type BIT(1), which is a bit string consisting of a 0 or 1.
      Specified by:
      setBoolean in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • setByte

      public void setByte(int parameterIndex, byte x) throws SQLException
      Sets the designated parameter to the given Java byte value. The driver converts this to an SQL TINYINT value when it sends it to the database.
      Specified by:
      setByte in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • setShort

      public void setShort(int parameterIndex, short x) throws SQLException
      Sets the designated parameter to the given Java short value. The driver converts this to an SQL SMALLINT value when it sends it to the database.
      Specified by:
      setShort in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • setInt

      public void setInt(int parameterIndex, int x) throws SQLException
      Sets the designated parameter to the given Java int value. The driver converts this to an SQL INTEGER value when it sends it to the database.
      Specified by:
      setInt in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • setLong

      public void setLong(int parameterIndex, long x) throws SQLException
      Sets the designated parameter to the given Java long value. The driver converts this to an SQL BIGINT value when it sends it to the database.
      Specified by:
      setLong in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • setFloat

      public void setFloat(int parameterIndex, float x) throws SQLException
      Sets the designated parameter to the given Java float value. The driver converts this to an SQL REAL value when it sends it to the database.

      HSQLDB-Specific Information:

      Since 1.7.1, HSQLDB handles Java positive/negative Infinity and NaN float values consistent with the Java Language Specification; these special values are now correctly stored to and retrieved from the database.
      Specified by:
      setFloat in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • setDouble

      public void setDouble(int parameterIndex, double x) throws SQLException
      Sets the designated parameter to the given Java double value. The driver converts this to an SQL DOUBLE value when it sends it to the database.

      HSQLDB-Specific Information:

      Since 1.7.1, HSQLDB handles Java positive/negative Infinity and NaN double values consistent with the Java Language Specification; these special values are now correctly stored to and retrieved from the database.
      Specified by:
      setDouble in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • setBigDecimal

      public void setBigDecimal(int parameterIndex, BigDecimal x) throws SQLException
      Sets the designated parameter to the given java.math.BigDecimal value. The driver converts this to an SQL NUMERIC value when it sends it to the database.
      Specified by:
      setBigDecimal in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • setString

      public void setString(int parameterIndex, String x) throws SQLException
      Sets the designated parameter to the given Java String value. The driver converts this to an SQL VARCHAR or LONGVARCHAR value (depending on the argument's size relative to the driver's limits on VARCHAR values) when it sends it to the database.

      HSQLDB-Specific Information:

      Including 2.0, HSQLDB represents all XXXCHAR values internally as java.lang.String objects; there is no appreciable difference between CHAR, VARCHAR and LONGVARCHAR.
      Specified by:
      setString in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • setBytes

      public void setBytes(int parameterIndex, byte[] x) throws SQLException
      Sets the designated parameter to the given Java array of bytes. The driver converts this to an SQL VARBINARY or LONGVARBINARY (depending on the argument's size relative to the driver's limits on VARBINARY values) when it sends it to the database.

      HSQLDB-Specific Information:

      Including 2.0, HSQLDB represents all XXXBINARY values the same way internally; there is no appreciable difference between BINARY, VARBINARY and LONGVARBINARY as far as JDBC is concerned.
      Specified by:
      setBytes in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • setDate

      public void setDate(int parameterIndex, Date x) throws SQLException
      Sets the designated parameter to the given java.sql.Date value using the default time zone of the virtual machine that is running the application. The driver converts this to an SQL DATE value when it sends it to the database.

      HSQLDB-Specific Information:

      When a setXXX method is used to set a parameter of type TIMESTAMP WITH TIME ZONE or TIME WITH TIME ZONE the time zone of the client application is used as time zone
      Specified by:
      setDate in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • setTime

      public void setTime(int parameterIndex, Time x) throws SQLException
      Sets the designated parameter to the given java.sql.Time value. The driver converts this to an SQL TIME value when it sends it to the database.

      HSQLDB-Specific Information:

      When a setXXX method is used to set a parameter of type TIMESTAMP WITH TIME ZONE or TIME WITH TIME ZONE the time zone of the client application is used as time zone
      Specified by:
      setTime in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • setTimestamp

      public void setTimestamp(int parameterIndex, Timestamp x) throws SQLException
      Sets the designated parameter to the given java.sql.Timestamp value. The driver converts this to an SQL TIMESTAMP value when it sends it to the database.

      HSQLDB-Specific Information:

      When a setXXX method is used to set a parameter of type TIMESTAMP WITH TIME ZONE or TIME WITH TIME ZONE the time zone of the client application is used as time zone.

      When this method is used to set a parameter of type TIME or TIME WITH TIME ZONE, then the nanosecond value of the Timestamp object will be used if the TIME parameter accepts fractional seconds.

      Specified by:
      setTimestamp in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • setAsciiStream

      public void setAsciiStream(int parameterIndex, InputStream x, int length) throws SQLException
      Sets the designated parameter to the given input stream, which will have the specified number of bytes. When a very large ASCII value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.InputStream. Data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from ASCII to the database char format.

      Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

      HSQLDB-Specific Information:

      From HSQLDB 2.0 this method uses the US-ASCII character encoding to convert bytes from the stream into the characters of a String.

      This method does not use streaming to send the data, whether the target is a CLOB or other binary object.

      For long streams (larger than a few megabytes) with CLOB targets, it is more efficient to use a version of setCharacterStream which takes the a length parameter.

      Specified by:
      setAsciiStream in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the Java input stream that contains the ASCII parameter value
      length - the number of bytes in the stream
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • setUnicodeStream

      @Deprecated public void setUnicodeStream(int parameterIndex, InputStream x, int length) throws SQLException
      Deprecated.
      Use setCharacterStream
      Sets the designated parameter to the given input stream, which will have the specified number of bytes. When a very large Unicode value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.InputStream object. The data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from Unicode to the database char format. The byte format of the Unicode stream must be a Java UTF-8, as defined in the Java Virtual Machine Specification.

      Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

      HSQLDB-Specific Information:

      Starting with 2.0, this method behaves according to the JDBC4 specification (the stream is treated as though it has UTF-8 encoding. This method is deprecated: please use setCharacterStream(...) instead.
      Specified by:
      setUnicodeStream in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - a java.io.InputStream object that contains the Unicode parameter value
      length - the number of bytes in the stream
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method

    • setBinaryStream

      public void setBinaryStream(int parameterIndex, InputStream x, int length) throws SQLException
      Sets the designated parameter to the given input stream, which will have the specified number of bytes. When a very large binary value is input to a LONGVARBINARY parameter, it may be more practical to send it via a java.io.InputStream object. The data will be read from the stream as needed until end-of-file is reached.

      Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

      HSQLDB-Specific Information:

      Since 1.7.2, this method works according to the standard.
      Specified by:
      setBinaryStream in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the java input stream which contains the binary parameter value
      length - the number of bytes in the stream
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement

    • clearParameters

      public void clearParameters() throws SQLException
      Clears the current parameter values immediately.

      In general, parameter values remain in force for repeated use of a statement. Setting a parameter value automatically clears its previous value. However, in some cases it is useful to immediately release the resources used by the current parameter values; this can be done by calling the method clearParameters.

      Specified by:
      clearParameters in interface PreparedStatement
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed PreparedStatement

    • setObject

      public void setObject(int parameterIndex, Object x, int targetSqlType) throws SQLException
      Sets the value of the designated parameter with the given object. This method is similar to setObject(int parameterIndex, Object x, int targetSqlType, int scaleOrLength), except that it assumes a scale of zero.

      HSQLDB-Specific Information:

      Since 1.7.2, this method supports conversions listed in the conversion table B-5 of the JDBC 3 specification.
      Specified by:
      setObject in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the object containing the input parameter value
      targetSqlType - the SQL type (as defined in java.sql.Types) to be sent to the database
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support the specified targetSqlType
      See Also:

    • setObject

      public void setObject(int parameterIndex, Object x) throws SQLException

      Sets the value of the designated parameter using the given object.

      The JDBC specification specifies a standard mapping from Java Object types to SQL types. The given argument will be converted to the corresponding SQL type before being sent to the database.

      Note that this method may be used to pass database- specific abstract data types, by using a driver-specific Java type. If the object is of a class implementing the interface SQLData, the JDBC driver should call the method SQLData.writeSQL to write it to the SQL data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, RowId, SQLXML or Array, the driver should pass it to the database as a value of the corresponding SQL type.

      Note: Not all databases allow for a non-typed Null to be sent to the backend. For maximum portability, the setNull or the setObject(int parameterIndex, Object x, int sqlType) method should be used instead of setObject(int parameterIndex, Object x).

      Note: This method throws an exception if there is an ambiguity, for example, if the object is of a class implementing more than one of the interfaces named above.

      HSQLDB-Specific Information:

      Since 1.7.2, this method supports conversions listed in the conversion table B-5 of the JDBC 3 specification.
      Specified by:
      setObject in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the object containing the input parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs; this method is called on a closed PreparedStatement or the type of the given object is ambiguous

    • execute

      public boolean execute() throws SQLException
      Executes the SQL statement in this PreparedStatement object, which may be any kind of SQL statement. Some prepared statements return multiple results; the execute method handles these complex statements as well as the simpler form of statements handled by the methods executeQuery and executeUpdate.

      The execute method returns a boolean to indicate the form of the first result. You must call either the method getResultSet or getUpdateCount to retrieve the result; you must call getMoreResults to move to any subsequent result(s).

      HSQLDB-Specific Information:

      If the statement is a call to a PROCEDURE, it may return multiple fetchable results.
      Specified by:
      execute in interface PreparedStatement
      Returns:
      true if the first result is a ResultSet object; false if the first result is an update count or there is no result
      Throws:
      SQLException - if a database access error occurs; this method is called on a closed PreparedStatement or an argument is supplied to this method
      SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement
      See Also:

    • addBatch

      public void addBatch() throws SQLException
      Adds a set of parameters to this PreparedStatement object's batch of commands.

      HSQLDB-Specific Information:

      Since 1.7.2, this feature is supported.
      Specified by:
      addBatch in interface PreparedStatement
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed PreparedStatement
      Since:
      JDK 1.2
      See Also:

    • setCharacterStream

      public void setCharacterStream(int parameterIndex, Reader reader, int length) throws SQLException
      Sets the designated parameter to the given Reader object, which is the given number of characters long. When a very large UNICODE value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.Reader object. The data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from UNICODE to the database char format.

      Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

      HSQLDB-Specific Information:

      From HSQLDB 2.0 this method uses streaming to send data when the target is a CLOB.

      HSQLDB represents CHARACTER and related SQL types as UTF16 Unicode internally, so this method does not perform any conversion.

      Specified by:
      setCharacterStream in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      reader - the java.io.Reader object that contains the Unicode data
      length - the number of characters in the stream
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      Since:
      JDK 1.2

    • setRef

      public void setRef(int parameterIndex, Ref x) throws SQLException
      Sets the designated parameter to the given REF(<structured-type>) value. The driver converts this to an SQL REF value when it sends it to the database.

      HSQLDB-Specific Information:

      Including 2.0 HSQLDB does not support the SQL REF type. Calling this method throws an exception.
      Specified by:
      setRef in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - an SQL REF value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.2

    • setBlob

      public void setBlob(int parameterIndex, Blob x) throws SQLException
      Sets the designated parameter to the given java.sql.Blob object. The driver converts this to an SQL BLOB value when it sends it to the database.

      HSQLDB-Specific Information:

      For parameters of type Blob, setBlob works normally.

      In addition since 1.7.2, setBlob is supported for BINARY and VARBINARY parameters. In this context, the Blob object is hard-limited to those of length less than or equal to Integer.MAX_VALUE. In practice, soft limits such as available heap and maximum disk usage per file (such as the transaction log) dictate a much smaller maximum length.

      For BINARY and VARBINARY parameter types setBlob(i,x) is roughly equivalent (null and length handling not shown) to: 

      setBinaryStream(i, x.getBinaryStream(), (int) x.length());
      Specified by:
      setBlob in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - a Blob object that maps an SQL BLOB value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.2

    • setClob

      public void setClob(int parameterIndex, Clob x) throws SQLException
      Sets the designated parameter to the given java.sql.Clob object. The driver converts this to an SQL CLOB value when it sends it to the database.

      HSQLDB-Specific Information:

      For parameters of type Clob, setClob works normally.

      In addition since 1.7.2, setClob is supported for CHARACTER and VARCHAR parameters. In this context, the Clob object is hard-limited to those of length less than or equal to Integer.MAX_VALUE. In practice, soft limits such as available heap and maximum disk usage per file (such as the transaction log) dictate a much smaller maximum length.

      For CHARACTER and VARCHAR parameter types setClob(i,x) is roughly equivalent (null and length handling not shown) to: 

      setCharacterStream(i, x.getCharacterStream(), (int) x.length());
      Specified by:
      setClob in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - a Clob object that maps an SQL CLOB value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.2

    • setArray

      public void setArray(int parameterIndex, Array x) throws SQLException
      Sets the designated parameter to the given java.sql.Array object. The driver converts this to an SQL ARRAY value when it sends it to the database.

      HSQLDB-Specific Information:

      From version 2.0, HSQLDB supports the SQL ARRAY type.
      Specified by:
      setArray in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - an Array object that maps an SQL ARRAY value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.2

    • getMetaData

      public ResultSetMetaData getMetaData() throws SQLException
      Retrieves a ResultSetMetaData object that contains information about the columns of the ResultSet object that will be returned when this PreparedStatement object is executed.

      Because a PreparedStatement object is precompiled, it is possible to know about the ResultSet object that it will return without having to execute it. Consequently, it is possible to invoke the method getMetaData on a PreparedStatement object rather than waiting to execute it and then invoking the ResultSet.getMetaData method on the ResultSet object that is returned.

      NOTE: Using this method may be expensive for some drivers due to the lack of underlying DBMS support.

      HSQLDB-Specific Information:

      Since 1.7.2, this feature is supported and is inexpensive as it is backed by underlying DBMS support. If the statement generates an update count, then null is returned.
      Specified by:
      getMetaData in interface PreparedStatement
      Returns:
      the description of a ResultSet object's columns or null if the driver cannot return a ResultSetMetaData object
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.2

    • setDate

      public void setDate(int parameterIndex, Date x, Calendar cal) throws SQLException
      Sets the designated parameter to the given java.sql.Date value, using the given Calendar object. The driver uses the Calendar object to construct an SQL DATE value, which the driver then sends to the database. With a Calendar object, the driver can calculate the date taking into account a custom timezone. If no Calendar object is specified, the driver uses the default timezone, which is that of the virtual machine running the application.
      Specified by:
      setDate in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      cal - the Calendar object the driver will use to construct the date
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      Since:
      JDK 1.2

    • setTime

      public void setTime(int parameterIndex, Time x, Calendar cal) throws SQLException
      Sets the designated parameter to the given java.sql.Time value, using the given Calendar object. The driver uses the Calendar object to construct an SQL TIME value, which the driver then sends to the database. With a Calendar object, the driver can calculate the time taking into account a custom timezone. If no Calendar object is specified, the driver uses the default timezone, which is that of the virtual machine running the application.

      HSQLDB-Specific Information:

      When a setXXX method is used to set a parameter of type TIMESTAMP WITH TIME ZONE or TIME WITH TIME ZONE the time zone (including Daylight Saving Time) of the Calendar is used as time zone for the value.
      Specified by:
      setTime in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      cal - the Calendar object the driver will use to construct the time
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      Since:
      JDK 1.2

    • setTimestamp

      public void setTimestamp(int parameterIndex, Timestamp x, Calendar cal) throws SQLException
      Sets the designated parameter to the given java.sql.Timestamp value, using the given Calendar object. The driver uses the Calendar object to construct an SQL TIMESTAMP value, which the driver then sends to the database. With a Calendar object, the driver can calculate the timestamp taking into account a custom timezone. If no Calendar object is specified, the driver uses the default timezone, which is that of the virtual machine running the application.

      HSQLDB-Specific Information:

      When a setXXX method is used to set a parameter of type TIMESTAMP WITH TIME ZONE or TIME WITH TIME ZONE the time zone (including Daylight Saving Time) of the Calendar is used as time zone.

      In this case, if the Calendar argument is null, then the default Calendar for the clients JVM is used as the Calendar

      When this method is used to set a parameter of type TIME or TIME WITH TIME ZONE, then the nanosecond value of the Timestamp object is used if the TIME parameter accepts fractional seconds.

      Specified by:
      setTimestamp in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      cal - the Calendar object the driver will use to construct the timestamp
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      Since:
      JDK 1.2

    • setNull

      public void setNull(int parameterIndex, int sqlType, String typeName) throws SQLException
      Sets the designated parameter to SQL NULL. This version of the method setNull should be used for user-defined types and REF type parameters. Examples of user-defined types include: STRUCT, DISTINCT, JAVA_OBJECT, and named array types.

      Note: To be portable, applications must give the SQL type code and the fully-qualified SQL type name when specifying a NULL user-defined or REF parameter. In the case of a user-defined type the name is the type name of the parameter itself. For a REF parameter, the name is the type name of the referenced type. If a JDBC driver does not need the type code or type name information, it may ignore it. Although it is intended for user-defined and Ref parameters, this method may be used to set a null parameter of any JDBC type. If the parameter does not have a user-defined or REF type, the given typeName is ignored.

      HSQLDB-Specific Information:

      HSQLDB simply ignores the sqlType and typeName arguments.
      Specified by:
      setNull in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      sqlType - a value from java.sql.Types
      typeName - the fully-qualified name of an SQL user-defined type; ignored if the parameter is not a user-defined type or REF
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if sqlType is a ARRAY, BLOB, CLOB, DATALINK, JAVA_OBJECT, NCHAR, NCLOB, NVARCHAR, LONGNVARCHAR, REF, ROWID, SQLXML or STRUCT data type and the JDBC driver does not support this data type or if the JDBC driver does not support this method
      Since:
      JDK 1.2

    • executeBatch

      public int[] executeBatch() throws SQLException
      Submits a batch of commands to the database for execution and if all commands execute successfully, returns an array of update counts. The int elements of the array that is returned are ordered to correspond to the commands in the batch, which are ordered according to the order in which they were added to the batch. The elements in the array returned by the method executeBatch may be one of the following:
      1. A number greater than or equal to zero -- indicates that the command was processed successfully and is an update count giving the number of rows in the database that were affected by the command's execution
      2. A value of SUCCESS_NO_INFO -- indicates that the command was processed successfully but that the number of rows affected is unknown

        If one of the commands in a batch update fails to execute properly, this method throws a BatchUpdateException, and a JDBC driver may or may not continue to process the remaining commands in the batch. However, the driver's behavior must be consistent with a particular DBMS, either always continuing to process commands or never continuing to process commands. If the driver continues processing after a failure, the array returned by the method BatchUpdateException.getUpdateCounts will contain as many elements as there are commands in the batch, and at least one of the elements will be the following:

      3. A value of EXECUTE_FAILED -- indicates that the command failed to execute successfully and occurs only if a driver continues to process commands after a command fails

      A driver is not required to implement this method. The possible implementations and return values have been modified in the Java 2 SDK, Standard Edition, version 1.3 to accommodate the option of continuing to process commands in a batch update after a BatchUpdateException object has been thrown.

      HSQLDB-Specific Information:

      Starting with HSQLDB 1.7.2, this feature is supported.

      HSQLDB stops execution of commands in a batch when one of the commands results in an exception. The size of the returned array equals the number of commands that were executed successfully.

      Specified by:
      executeBatch in interface Statement
      Returns:
      an array of update counts containing one element for each command in the batch. The elements of the array are ordered according to the order in which commands were added to the batch.
      Throws:
      SQLException - if a database access error occurs, this method is called on a closed Statement or the driver does not support batch statements. Throws BatchUpdateException (a subclass of SQLException) if one of the commands sent to the database fails to execute properly or attempts to return a result set.
      Since:
      JDK 1.3
      See Also:

    • setEscapeProcessing

      public void setEscapeProcessing(boolean enable) throws SQLException
      Sets escape processing on or off.

      HSQLDB-Specific Information:

      As per JDBC spec, calling this method has no effect.
      Specified by:
      setEscapeProcessing in interface Statement
      Parameters:
      enable - true to enable escape processing; false to disable it
      Throws:
      SQLException - if a database access error occurs

    • addBatch

      public void addBatch(String sql) throws SQLException
      This method should always throw if called for a PreparedStatement or CallableStatement.
      Specified by:
      addBatch in interface Statement
      Parameters:
      sql - ignored
      Throws:
      SQLException - always

    • executeQuery

      public ResultSet executeQuery(String sql) throws SQLException
      This method should always throw if called for a PreparedStatement or CallableStatement.
      Specified by:
      executeQuery in interface Statement
      Parameters:
      sql - ignored
      Returns:
      nothing
      Throws:
      SQLException - always

    • execute

      public boolean execute(String sql) throws SQLException
      This method should always throw if called for a PreparedStatement or CallableStatement.
      Specified by:
      execute in interface Statement
      Parameters:
      sql - ignored
      Returns:
      nothing
      Throws:
      SQLException - always

    • executeUpdate

      public int executeUpdate(String sql) throws SQLException
      This method should always throw if called for a PreparedStatement or CallableStatement.
      Specified by:
      executeUpdate in interface Statement
      Parameters:
      sql - ignored
      Returns:
      nothing
      Throws:
      SQLException - always

    • close

      public void close() throws SQLException
      Does the specialized work required to free this object's resources and that of its parent class.
      Specified by:
      close in interface AutoCloseable
      Specified by:
      close in interface Statement
      Throws:
      SQLException - if a database access error occurs

    • toString

      public String toString()
      Retrieves a String representation of this object.

      The representation is of the form:

      class-name@hash[sql=[char-sequence], parameters=[p1, ...pi, ...pn]]

      p1, ...pi, ...pn are the String representations of the currently set parameter values that will be used with the non-batch execution methods.

      Overrides:
      toString in class Object
      Returns:
      a String representation of this object

    • setURL

      public void setURL(int parameterIndex, URL x) throws SQLException
      Sets the designated parameter to the given java.net.URL value. The driver converts this to an SQL DATALINK value when it sends it to the database.

      HSQLDB-Specific Information:

      Including 2.0, HSQLDB does not support the DATALINK SQL type for which this method is intended. Calling this method throws an exception.
      Specified by:
      setURL in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the java.net.URL object to be set
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.4, HSQL 1.7.0

    • getParameterMetaData

      public ParameterMetaData getParameterMetaData() throws SQLException
      Retrieves the number, types and properties of this PreparedStatement object's parameters.

      HSQLDB-Specific Information:

      Since 1.7.2, this feature is supported.
      Specified by:
      getParameterMetaData in interface PreparedStatement
      Returns:
      a ParameterMetaData object that contains information about the number, types and properties for each parameter marker of this PreparedStatement object
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed PreparedStatement
      Since:
      JDK 1.4, HSQL 1.7.0
      See Also:

    • executeUpdate

      public int executeUpdate(String sql, int autoGeneratedKeys) throws SQLException
      Statement methods that must be overridden in this class and throw an exception.
      Specified by:
      executeUpdate in interface Statement
      Throws:
      SQLException

    • execute

      public boolean execute(String sql, int autoGeneratedKeys) throws SQLException
      Specified by:
      execute in interface Statement
      Throws:
      SQLException

    • executeUpdate

      public int executeUpdate(String sql, int[] columnIndexes) throws SQLException
      Specified by:
      executeUpdate in interface Statement
      Throws:
      SQLException

    • execute

      public boolean execute(String sql, int[] columnIndexes) throws SQLException
      Specified by:
      execute in interface Statement
      Throws:
      SQLException

    • executeUpdate

      public int executeUpdate(String sql, String[] columnNames) throws SQLException
      Specified by:
      executeUpdate in interface Statement
      Throws:
      SQLException

    • execute

      public boolean execute(String sql, String[] columnNames) throws SQLException
      Specified by:
      execute in interface Statement
      Throws:
      SQLException

    • getMoreResults

      public boolean getMoreResults(int current) throws SQLException
      Moves to this Statement object's next result, deals with any current ResultSet object(s) according to the instructions specified by the given flag, and returns true if the next result is a ResultSet object.

      There are no more results when the following is true: 

          // stmt is a Statement object
    ((stmt.getMoreResults(current) == false) && (stmt.getUpdateCount() == -1))

      HSQLDB-Specific Information:

      HSQLDB supports this feature.

      This is used with CallableStatement objects that return multiple ResultSet objects.

      Specified by:
      getMoreResults in interface Statement
      Parameters:
      current - one of the following Statement constants indicating what should happen to current ResultSet objects obtained using the method getResultSet: Statement.CLOSE_CURRENT_RESULT, Statement.KEEP_CURRENT_RESULT, or Statement.CLOSE_ALL_RESULTS
      Returns:
      true if the next result is a ResultSet object; false if it is an update count or there are no more results
      Throws:
      SQLException - if a database access error occurs, this method is called on a closed Statement or the argument supplied is not one of the following: Statement.CLOSE_CURRENT_RESULT, Statement.KEEP_CURRENT_RESULT, or Statement.CLOSE_ALL_RESULTS
      Since:
      JDK 1.4, HSQLDB 1.7
      See Also:

    • getGeneratedKeys

      public ResultSet getGeneratedKeys() throws SQLException
      Retrieves any auto-generated keys created as a result of executing this Statement object. If this Statement object did not generate any keys, an empty ResultSet object is returned.

      Note:If the columns which represent the auto-generated keys were not specified, the JDBC driver implementation will determine the columns which best represent the auto-generated keys.

      HSQLDB-Specific Information:

      Starting with version 2.0, HSQLDB supports this feature with single-row and multi-row insert, update and merge statements.

      This method returns a result set only if the executeUpdate methods that was used is one of the three methods that have the extra parameter indicating return of generated keys

      If the executeUpdate method did not specify the columns which represent the auto-generated keys the IDENTITY column or GENERATED column(s) of the table are returned.

      The executeUpdate methods with column indexes or column names return the post-insert or post-update values of the specified columns, whether the columns are generated or not. This allows values that have been modified by execution of triggers to be returned.

      If column names or indexes provided by the user in the executeUpdate() method calls do not correspond to table columns (incorrect names or indexes larger than the column count), an empty result is returned.

      Specified by:
      getGeneratedKeys in interface Statement
      Returns:
      a ResultSet object containing the auto-generated key(s) generated by the execution of this Statement object
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.4, HSQLDB 1.7

    • getResultSetHoldability

      public int getResultSetHoldability() throws SQLException
      Retrieves the result set holdability for ResultSet objects generated by this Statement object.
      Specified by:
      getResultSetHoldability in interface Statement
      Returns:
      either ResultSet.HOLD_CURSORS_OVER_COMMIT or ResultSet.CLOSE_CURSORS_AT_COMMIT
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      Since:
      JDK 1.4, HSQLDB 1.7

    • isClosed

      public boolean isClosed()
      Retrieves whether this Statement object has been closed. A Statement is closed if the method close has been called on it, or if it is automatically closed.
      Specified by:
      isClosed in interface Statement
      Returns:
      true if this Statement object is closed; false if it is still open
      Since:
      JDK 1.6, HSQLDB 2.0

    • setRowId

      public void setRowId(int parameterIndex, RowId x) throws SQLException
      Sets the designated parameter to the given java.sql.RowId object. The driver converts this to a SQL ROWID value when it sends it to the database
      Specified by:
      setRowId in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.6, HSQLDB 2.0

    • setNString

      public void setNString(int parameterIndex, String value) throws SQLException
      Sets the designated parameter to the given String object. The driver converts this to a SQL NCHAR or NVARCHAR or LONGNVARCHAR value (depending on the argument's size relative to the driver's limits on NVARCHAR values) when it sends it to the database.
      Specified by:
      setNString in interface PreparedStatement
      Parameters:
      parameterIndex - of the first parameter is 1, the second is 2, ...
      value - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; if a database access error occurs; or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.6, HSQLDB 2.0

    • setNCharacterStream

      public void setNCharacterStream(int parameterIndex, Reader value, long length) throws SQLException
      Sets the designated parameter to a Reader object. The Reader reads the data till end-of-file is reached. The driver does the necessary conversion from Java character format to the national character set in the database.
      Specified by:
      setNCharacterStream in interface PreparedStatement
      Parameters:
      parameterIndex - of the first parameter is 1, the second is 2, ...
      value - the parameter value
      length - the number of characters in the parameter data.
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; if a database access error occurs; or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.6, HSQLDB 2.0

    • setNClob

      public void setNClob(int parameterIndex, NClob value) throws SQLException
      Sets the designated parameter to a java.sql.NClob object. The driver converts this to a SQL NCLOB value when it sends it to the database.
      Specified by:
      setNClob in interface PreparedStatement
      Parameters:
      parameterIndex - of the first parameter is 1, the second is 2, ...
      value - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; if a database access error occurs; or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.6, HSQLDB 2.0

    • setClob

      public void setClob(int parameterIndex, Reader reader, long length) throws SQLException
      Sets the designated parameter to a Reader object. The reader must contain the number of characters specified by length otherwise a SQLException will be generated when the PreparedStatement is executed. This method differs from the setCharacterStream (int, Reader, int) method because it informs the driver that the parameter value should be sent to the server as a CLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARCHAR or a CLOB
      Specified by:
      setClob in interface PreparedStatement
      Parameters:
      parameterIndex - index of the first parameter is 1, the second is 2, ...
      reader - An object that contains the data to set the parameter value to.
      length - the number of characters in the parameter data.
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs; this method is called on a closed PreparedStatement or if the length specified is less than zero.
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.6, HSQLDB 2.0

    • setBlob

      public void setBlob(int parameterIndex, InputStream inputStream, long length) throws SQLException
      Sets the designated parameter to a InputStream object. The Inputstream must contain the number of characters specified by length otherwise a SQLException will be generated when the PreparedStatement is executed. This method differs from the setBinaryStream (int, InputStream, int) method because it informs the driver that the parameter value should be sent to the server as a BLOB. When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARBINARY or a BLOB

      HSQLDB-Specific Information:

      In HSQLDB 2.0, this method uses streaming to send the data when the stream is assigned to a BLOB target. For other binary targets the stream is read on the client side and a byte array is sent.
      Specified by:
      setBlob in interface PreparedStatement
      Parameters:
      parameterIndex - index of the first parameter is 1, the second is 2, ...
      inputStream - An object that contains the data to set the parameter value to.
      length - the number of bytes in the parameter data.
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs; this method is called on a closed PreparedStatement; if the length specified is less than zero or if the number of bytes in the InputStream does not match the specified length.
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.6, HSQLDB 2.0

    • setNClob

      public void setNClob(int parameterIndex, Reader reader, long length) throws SQLException
      Sets the designated parameter to a Reader object. The reader must contain the number of characters specified by length otherwise a SQLException will be generated when the PreparedStatement is executed. This method differs from the setCharacterStream (int, Reader, int) method because it informs the driver that the parameter value should be sent to the server as a NCLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGNVARCHAR or a NCLOB
      Specified by:
      setNClob in interface PreparedStatement
      Parameters:
      parameterIndex - index of the first parameter is 1, the second is 2, ...
      reader - An object that contains the data to set the parameter value to.
      length - the number of characters in the parameter data.
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if the length specified is less than zero; if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.6, HSQLDB 2.0

    • setSQLXML

      public void setSQLXML(int parameterIndex, SQLXML xmlObject) throws SQLException
      Sets the designated parameter to the given java.sql.SQLXML object. The driver converts this to an SQL XML value when it sends it to the database.
      Specified by:
      setSQLXML in interface PreparedStatement
      Parameters:
      parameterIndex - index of the first parameter is 1, the second is 2, ...
      xmlObject - a SQLXML object that maps an SQL XML value
      Throws:
      SQLException - if a database access error occurs, this method is called on a closed PreparedStatement or the java.xml.transform.Result, Writer or OutputStream has not been closed for the SQLXML object
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      JDK 1.6, HSQLDB 2.0

    • setObject

      public void setObject(int parameterIndex, Object x, int targetSqlType, int scaleOrLength) throws SQLException

      Sets the value of the designated parameter with the given object. If the second argument is an InputStream then the stream must contain the number of bytes specified by scaleOrLength. If the second argument is a Reader then the reader must contain the number of characters specified by scaleOrLength. If these conditions are not true the driver will generate a SQLException when the prepared statement is executed.

      The given Java object will be converted to the given targetSqlType before being sent to the database. If the object has a custom mapping (is of a class implementing the interface SQLData), the JDBC driver should call the method SQLData.writeSQL to write it to the SQL data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, or Array, the driver should pass it to the database as a value of the corresponding SQL type.

      Note that this method may be used to pass database-specific abstract data types.

      Specified by:
      setObject in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the object containing the input parameter value
      targetSqlType - the SQL type (as defined in java.sql.Types) to be sent to the database. The scale argument may further qualify this type.
      scaleOrLength - for java.sql.Types.DECIMAL or java.sql.Types.NUMERIC types, this is the number of digits after the decimal point. For Java Object types InputStream and Reader, this is the length of the data in the stream or reader. For all other types, this value will be ignored.
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs; this method is called on a closed PreparedStatement or if the Java Object specified by x is an InputStream or Reader object and the value of the scale parameter is less than zero
      SQLFeatureNotSupportedException - if the JDBC driver does not support the specified targetSqlType
      See Also:

    • setAsciiStream

      public void setAsciiStream(int parameterIndex, InputStream x, long length) throws SQLException
      Sets the designated parameter to the given input stream, which will have the specified number of bytes. When a very large ASCII value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.InputStream. Data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from ASCII to the database char format.

      Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

      HSQLDB-Specific Information:

      From HSQLDB 2.0 this method uses the US-ASCII character encoding to convert bytes from the stream into the characters of a String.

      This method does not use streaming to send the data, whether the target is a CLOB or other binary object.

      For long streams (larger than a few megabytes) with CLOB targets, it is more efficient to use a version of setCharacterStream which takes the a length parameter.

      Specified by:
      setAsciiStream in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the Java input stream that contains the ASCII parameter value
      length - the number of bytes in the stream
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      Since:
      JDK 1.6, HSQLDB 2.0

    • setBinaryStream

      public void setBinaryStream(int parameterIndex, InputStream x, long length) throws SQLException
      Sets the designated parameter to the given input stream, which will have the specified number of bytes. When a very large binary value is input to a LONGVARBINARY parameter, it may be more practical to send it via a java.io.InputStream object. The data will be read from the stream as needed until end-of-file is reached.

      Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

      HSQLDB-Specific Information:

      This method uses streaming to send the data when the stream is assigned to a BLOB target. For other binary targets the stream is read on the client side and a byte array is sent.
      Specified by:
      setBinaryStream in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the java input stream which contains the binary parameter value
      length - the number of bytes in the stream
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      Since:
      JDK 1.6, HSQLDB 2.0

    • setCharacterStream

      public void setCharacterStream(int parameterIndex, Reader reader, long length) throws SQLException
      Sets the designated parameter to the given Reader object, which is the given number of characters long. When a very large UNICODE value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.Reader object. The data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from UNICODE to the database char format.

      Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

      HSQLDB-Specific Information:

      This method uses streaming to send data when the target is a CLOB.
      Specified by:
      setCharacterStream in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      reader - the java.io.Reader object that contains the Unicode data
      length - the number of characters in the stream
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      Since:
      JDK 1.6, HSQLDB 2.0

    • setAsciiStream

      public void setAsciiStream(int parameterIndex, InputStream x) throws SQLException
      Sets the designated parameter to the given input stream. When a very large ASCII value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.InputStream. Data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from ASCII to the database char format.

      Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

      Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setAsciiStream which takes a length parameter.

      HSQLDB-Specific Information:

      In HSQLDB 2.0, this method does not use streaming to send the data, whether the target is a CLOB or other binary object. For long streams (larger than a few megabytes), it is more efficient to use a version of setCharacterStream which takes the a length parameter.
      Specified by:
      setAsciiStream in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the Java input stream that contains the ASCII parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      1.6

    • setBinaryStream

      public void setBinaryStream(int parameterIndex, InputStream x) throws SQLException
      Sets the designated parameter to the given input stream. When a very large binary value is input to a LONGVARBINARY parameter, it may be more practical to send it via a java.io.InputStream object. The data will be read from the stream as needed until end-of-file is reached.

      Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

      Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setBinaryStream which takes a length parameter.

      HSQLDB-Specific Information:

      This method does not use streaming to send the data, whether the target is a CLOB or other binary object.

      For long streams (larger than a few megabytes) with CLOB targets, it is more efficient to use a version of setCharacterStream which takes the a length parameter.

      Specified by:
      setBinaryStream in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the java input stream which contains the binary parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      1.6

    • setCharacterStream

      public void setCharacterStream(int parameterIndex, Reader reader) throws SQLException
      Sets the designated parameter to the given Reader object. When a very large UNICODE value is input to a LONGVARCHAR parameter, it may be more practical to send it via a java.io.Reader object. The data will be read from the stream as needed until end-of-file is reached. The JDBC driver will do any necessary conversion from UNICODE to the database char format.

      Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

      Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setCharacterStream which takes a length parameter.

      HSQLDB-Specific Information:

      In HSQLDB 2.0, this method does not use streaming to send the data, whether the target is a CLOB or other binary object. For long streams (larger than a few megabytes), it is more efficient to use a version of setCharacterStream which takes the a length parameter.
      Specified by:
      setCharacterStream in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      reader - the java.io.Reader object that contains the Unicode data
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      1.6

    • setNCharacterStream

      public void setNCharacterStream(int parameterIndex, Reader value) throws SQLException
      Sets the designated parameter to a Reader object. The Reader reads the data till end-of-file is reached. The driver does the necessary conversion from Java character format to the national character set in the database.

      Note: This stream object can either be a standard Java stream object or your own subclass that implements the standard interface.

      Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setNCharacterStream which takes a length parameter.

      Specified by:
      setNCharacterStream in interface PreparedStatement
      Parameters:
      parameterIndex - of the first parameter is 1, the second is 2, ...
      value - the parameter value
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; if a database access error occurs; or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      1.6

    • setClob

      public void setClob(int parameterIndex, Reader reader) throws SQLException
      Sets the designated parameter to a Reader object. This method differs from the setCharacterStream (int, Reader) method because it informs the driver that the parameter value should be sent to the server as a CLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARCHAR or a CLOB

      Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setClob which takes a length parameter.

      Specified by:
      setClob in interface PreparedStatement
      Parameters:
      parameterIndex - index of the first parameter is 1, the second is 2, ...
      reader - An object that contains the data to set the parameter value to.
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs; this method is called on a closed PreparedStatementor if parameterIndex does not correspond to a parameter marker in the SQL statement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      1.6

    • setBlob

      public void setBlob(int parameterIndex, InputStream inputStream) throws SQLException
      Sets the designated parameter to a InputStream object. This method differs from the setBinaryStream (int, InputStream) method because it informs the driver that the parameter value should be sent to the server as a BLOB. When the setBinaryStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGVARBINARY or a BLOB

      Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setBlob which takes a length parameter.

      Specified by:
      setBlob in interface PreparedStatement
      Parameters:
      parameterIndex - index of the first parameter is 1, the second is 2, ...
      inputStream - An object that contains the data to set the parameter value to.
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs; this method is called on a closed PreparedStatement or if parameterIndex does not correspond to a parameter marker in the SQL statement,
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      1.6

    • setNClob

      public void setNClob(int parameterIndex, Reader reader) throws SQLException
      Sets the designated parameter to a Reader object. This method differs from the setCharacterStream (int, Reader) method because it informs the driver that the parameter value should be sent to the server as a NCLOB. When the setCharacterStream method is used, the driver may have to do extra work to determine whether the parameter data should be sent to the server as a LONGNVARCHAR or a NCLOB

      Note: Consult your JDBC driver documentation to determine if it might be more efficient to use a version of setNClob which takes a length parameter.

      Specified by:
      setNClob in interface PreparedStatement
      Parameters:
      parameterIndex - index of the first parameter is 1, the second is 2, ...
      reader - An object that contains the data to set the parameter value to.
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if the driver does not support national character sets; if the driver can detect that a data conversion error could occur; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method
      Since:
      1.6

    • getMaxFieldSize

      public int getMaxFieldSize() throws SQLException
      Retrieves the maximum number of bytes that can be returned for character and binary column values in a ResultSet object produced by this Statement object. This limit applies only to BINARY, VARBINARY, LONGVARBINARY, CHAR, VARCHAR, NCHAR, NVARCHAR, LONGNVARCHAR and LONGVARCHAR columns. If the limit is exceeded, the excess data is silently discarded.

      HSQLDB-Specific Information:

      HSQLDB always returns zero, meaning there is no limit.
      Specified by:
      getMaxFieldSize in interface Statement
      Returns:
      the current column size limit for columns storing character and binary values; zero means there is no limit
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      See Also:

    • setMaxFieldSize

      public void setMaxFieldSize(int max) throws SQLException
      Sets the limit for the maximum number of bytes in a ResultSet Sets the limit for the maximum number of bytes that can be returned for character and binary column values in a ResultSet object produced by this Statement object. This limit applies only to BINARY, VARBINARY, LONGVARBINARY, CHAR, VARCHAR, NCHAR, NVARCHAR, LONGNVARCHAR and LONGVARCHAR fields. If the limit is exceeded, the excess data is silently discarded. For maximum portability, use values greater than 256.

      HSQLDB-Specific Information:

      To present, calls to this method are simply ignored; HSQLDB always stores the full number of bytes when dealing with any of the field types mentioned above. These types all have an absolute maximum element upper bound determined by the Java array index limit java.lang.Integer.MAX_VALUE. For XXXBINARY types, this translates to Integer.MAX_VALUE bytes. For XXXCHAR types, this translates to 2 * Integer.MAX_VALUE bytes (2 bytes / character).

      In practice, field sizes are limited to values much smaller than the absolute maximum element upper bound, in particular due to limits imposed on the maximum available Java heap memory.

      Specified by:
      setMaxFieldSize in interface Statement
      Parameters:
      max - the new column size limit in bytes; zero means there is no limit
      Throws:
      SQLException - if a database access error occurs, this method is called on a closed Statement or the condition max >= 0 is not satisfied
      See Also:

    • getMaxRows

      public int getMaxRows() throws SQLException
      Retrieves the maximum number of rows that a ResultSet object produced by this Statement object can contain. If this limit is exceeded, the excess rows are silently dropped.
      Specified by:
      getMaxRows in interface Statement
      Returns:
      the current maximum number of rows for a ResultSet object produced by this Statement object; zero means there is no limit
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      See Also:

    • setMaxRows

      public void setMaxRows(int max) throws SQLException
      Sets the limit for the maximum number of rows that any ResultSet object generated by this Statement object can contain to the given number. If the limit is exceeded, the excess rows are silently dropped.
      Specified by:
      setMaxRows in interface Statement
      Parameters:
      max - the new max rows limit; zero means there is no limit
      Throws:
      SQLException - if a database access error occurs, this method is called on a closed Statement or the condition max >= 0 is not satisfied
      See Also:

    • getQueryTimeout

      public int getQueryTimeout() throws SQLException
      Retrieves the number of seconds the driver will wait for a Statement object to execute. If the limit is exceeded, a SQLException is thrown.

      HSQLDB-Specific Information:

      To present, HSQLDB always returns zero, meaning there is no limit.
      Specified by:
      getQueryTimeout in interface Statement
      Returns:
      the current query timeout limit in seconds; zero means there is no limit
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      See Also:

    • setQueryTimeout

      public void setQueryTimeout(int seconds) throws SQLException
      Sets the number of seconds the driver will wait for a Statement object to execute to the given number of seconds. If the limit is exceeded, an SQLException is thrown. A JDBC driver must apply this limit to the execute, executeQuery and executeUpdate methods. JDBC driver implementations may also apply this limit to ResultSet methods (consult your driver vendor documentation for details).

      HSQLDB-Specific Information:

      The maximum number of seconds to wait is 32767.
      Specified by:
      setQueryTimeout in interface Statement
      Parameters:
      seconds - the new query timeout limit in seconds; zero means there is no limit
      Throws:
      SQLException - if a database access error occurs, this method is called on a closed Statement or the condition seconds >= 0 is not satisfied
      See Also:

    • cancel

      public void cancel() throws SQLException
      Cancels this Statement object if both the DBMS and driver support aborting an SQL statement. This method can be used by one thread to cancel a statement that is being executed by another thread.

      HSQLDB-Specific Information:

      HSQLDB version 2.3.4 and later supports aborting an SQL query or data update statement.
      Specified by:
      cancel in interface Statement
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method

    • getWarnings

      public SQLWarning getWarnings() throws SQLException
      Retrieves the first warning reported by calls on this Statement object. Subsequent Statement object warnings will be chained to this SQLWarning object.

      The warning chain is automatically cleared each time a statement is (re)executed. This method may not be called on a closed Statement object; doing so will cause an SQLException to be thrown.

      Note: If you are processing a ResultSet object, any warnings associated with reads on that ResultSet object will be chained on it rather than on the Statement object that produced it.

      HSQLDB-Specific Information:

      From 1.9 HSQLDB, produces Statement warnings.
      Specified by:
      getWarnings in interface Statement
      Returns:
      the first SQLWarning object or null if there are no warnings
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement

    • clearWarnings

      public void clearWarnings() throws SQLException
      Clears all the warnings reported on this Statement object. After a call to this method, the method getWarnings will return null until a new warning is reported for this Statement object.

      HSQLDB-Specific Information:

      Supported in HSQLDB 1.9.
      Specified by:
      clearWarnings in interface Statement
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement

    • setCursorName

      public void setCursorName(String name) throws SQLException
      Sets the SQL cursor name to the given String, which will be used by subsequent Statement object execute methods. This name can then be used in SQL positioned update or delete statements to identify the current row in the ResultSet object generated by this statement. If the database does not support positioned update/delete, this method is a noop. To ensure that a cursor has the proper isolation level to support updates, the cursor's SELECT statement should have the form SELECT FOR UPDATE. If FOR UPDATE is not present, positioned updates may fail.

      Note: By definition, the execution of positioned updates and deletes must be done by a different Statement object than the one that generated the ResultSet object being used for positioning. Also, cursor names must be unique within a connection.

      HSQLDB-Specific Information:

      Including 2.0, HSQLDB does not support named cursors; calls to this method are ignored.
      Specified by:
      setCursorName in interface Statement
      Parameters:
      name - the new cursor name, which must be unique within a connection
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      SQLFeatureNotSupportedException - if the JDBC driver does not support this method

    • getResultSet

      public ResultSet getResultSet() throws SQLException
      Retrieves the current result as a ResultSet object. This method should be called only once per result.

      HSQLDB-Specific Information:

      Without an interceding call to executeXXX, each invocation of this method will produce a new, initialized ResultSet instance referring to the current result, if any.
      Specified by:
      getResultSet in interface Statement
      Returns:
      the current result as a ResultSet object or null if the result is an update count or there are no more results
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      See Also:

    • getUpdateCount

      public int getUpdateCount() throws SQLException
      Retrieves the current result as an update count; if the result is a ResultSet object or there are no more results, -1 is returned. This method should be called only once per result.
      Specified by:
      getUpdateCount in interface Statement
      Returns:
      the current result as an update count; -1 if the current result is a ResultSet object or there are no more results
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      See Also:

    • getMoreResults

      public boolean getMoreResults() throws SQLException
      Moves to this Statement object's next result, returns true if it is a ResultSet object, and implicitly closes any current ResultSet object(s) obtained with the method getResultSet.

      There are no more results when the following is true: 

          // stmt is a Statement object
    ((stmt.getMoreResults() == false) && (stmt.getUpdateCount() == -1))
      Specified by:
      getMoreResults in interface Statement
      Returns:
      true if the next result is a ResultSet object; false if it is an update count or there are no more results
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      See Also:

    • setFetchDirection

      public void setFetchDirection(int direction) throws SQLException
      Gives the driver a hint as to the direction in which rows will be processed in ResultSet objects created using this Statement object. The default value is ResultSet.FETCH_FORWARD.

      Note that this method sets the default fetch direction for result sets generated by this Statement object. Each result set has its own methods for getting and setting its own fetch direction.

      HSQLDB-Specific Information:

      Up to 1.8.0.x, HSQLDB supports only FETCH_FORWARD; Setting any other value would throw an SQLException stating that the operation is not supported.

      Starting with 2.0, HSQLDB accepts any valid value.

      Specified by:
      setFetchDirection in interface Statement
      Parameters:
      direction - the initial direction for processing rows
      Throws:
      SQLException - if a database access error occurs, this method is called on a closed Statement or the given direction is not one of ResultSet.FETCH_FORWARD, ResultSet.FETCH_REVERSE, or ResultSet.FETCH_UNKNOWN
      Since:
      JDK 1.2
      See Also:

    • getFetchDirection

      public int getFetchDirection() throws SQLException
      Retrieves the direction for fetching rows from database tables that is the default for result sets generated from this Statement object. If this Statement object has not set a fetch direction by calling the method setFetchDirection, the return value is implementation-specific.

      HSQLDB-Specific Information:

      Up to 1.8.0.x, HSQLDB always returned FETCH_FORWARD. Starting with 2.0, HSQLDB returns FETCH_FORWARD by default, or whatever value has been explicitly assigned by invoking setFetchDirection. .
      Specified by:
      getFetchDirection in interface Statement
      Returns:
      the default fetch direction for result sets generated from this Statement object
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      Since:
      JDK 1.2
      See Also:

    • setFetchSize

      public void setFetchSize(int rows) throws SQLException
      Gives the JDBC driver a hint as to the number of rows that should be fetched from the database when more rows are needed for ResultSet objects generated by this Statement. If the value specified is zero, then the hint is ignored. The default value is zero.

      HSQLDB-Specific Information:

      HSQLDB uses the specified value as a hint, but may process more or fewer rows than specified.
      Specified by:
      setFetchSize in interface Statement
      Parameters:
      rows - the number of rows to fetch
      Throws:
      SQLException - if a database access error occurs, this method is called on a closed Statement or the condition {@code rows >= 0} is not satisfied.
      Since:
      JDK 1.2
      See Also:

    • getFetchSize

      public int getFetchSize() throws SQLException
      Retrieves the number of result set rows that is the default fetch size for ResultSet objects generated from this Statement object. If this Statement object has not set a fetch size by calling the method setFetchSize, the return value is implementation-specific.
      HSQLDB-Specific Information

      HSQLDB returns 0 by default, or the fetch size specified by setFetchSize

      Specified by:
      getFetchSize in interface Statement
      Returns:
      the default fetch size for result sets generated from this Statement object
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      Since:
      JDK 1.2
      See Also:

    • getResultSetConcurrency

      public int getResultSetConcurrency() throws SQLException
      Retrieves the result set concurrency for ResultSet objects generated by this Statement object.

      HSQLDB-Specific Information:

      HSQLDB supports CONCUR_READ_ONLY and CONCUR_READ_UPDATEBLE concurrency.
      Specified by:
      getResultSetConcurrency in interface Statement
      Returns:
      either ResultSet.CONCUR_READ_ONLY or ResultSet.CONCUR_UPDATABLE
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      Since:
      JDK 1.2

    • getResultSetType

      public int getResultSetType() throws SQLException
      Retrieves the result set type for ResultSet objects generated by this Statement object.

      HSQLDB-Specific Information:

      HSQLDB 1.7.0 and later versions support TYPE_FORWARD_ONLY and TYPE_SCROLL_INSENSITIVE.
      Specified by:
      getResultSetType in interface Statement
      Returns:
      one of ResultSet.TYPE_FORWARD_ONLY, ResultSet.TYPE_SCROLL_INSENSITIVE, or ResultSet.TYPE_SCROLL_SENSITIVE
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      Since:
      JDK 1.2

    • clearBatch

      public void clearBatch() throws SQLException
      Empties this Statement object's current list of SQL commands.

      NOTE: Support of an ability to batch updates is optional.

      HSQLDB-Specific Information:

      Starting with HSQLDB 1.7.2, this feature is supported.
      Specified by:
      clearBatch in interface Statement
      Throws:
      SQLException - if a database access error occurs, this method is called on a closed Statement or the driver does not support batch updates
      Since:
      JDK 1.2
      See Also:

    • getConnection

      public Connection getConnection() throws SQLException
      Retrieves the Connection object that produced this Statement object.
      Specified by:
      getConnection in interface Statement
      Returns:
      the connection that produced this statement
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      Since:
      JDK 1.2

    • setPoolable

      public void setPoolable(boolean poolable) throws SQLException
      Requests that a Statement be pooled or not pooled. The value specified is a hint to the statement pool implementation indicating whether the application wants the statement to be pooled. It is up to the statement pool manager as to whether the hint is used.

      The poolable value of a statement is applicable to both internal statement caches implemented by the driver and external statement caches implemented by application servers and other applications.

      By default, a Statement is not poolable when created, and a PreparedStatement and CallableStatement are poolable when created.

      Specified by:
      setPoolable in interface Statement
      Parameters:
      poolable - requests that the statement be pooled if true and that the statement not be pooled if false
      Throws:
      SQLException - if this method is called on a closed Statement
      Since:
      JDK 1.6, HSQLDB 2.0

    • isPoolable

      public boolean isPoolable() throws SQLException
      Returns a value indicating whether the Statement is poolable or not.
      Specified by:
      isPoolable in interface Statement
      Returns:
      true if the Statement is poolable; false otherwise
      Throws:
      SQLException - if this method is called on a closed Statement
      Since:
      JDK 1.6, HSQLDB 2.0
      See Also:

    • unwrap

      public <T> T unwrap(Class<T> iface) throws SQLException
      Returns an object that implements the given interface to allow access to non-standard methods, or standard methods not exposed by the proxy. If the receiver implements the interface then the result is the receiver or a proxy for the receiver. If the receiver is a wrapper and the wrapped object implements the interface then the result is the wrapped object or a proxy for the wrapped object. Otherwise return the result of calling unwrap recursively on the wrapped object or a proxy for that result. If the receiver is not a wrapper and does not implement the interface, then an SQLException is thrown.
      Specified by:
      unwrap in interface Wrapper
      Parameters:
      iface - A Class defining an interface that the result must implement.
      Returns:
      an object that implements the interface. May be a proxy for the actual implementing object.
      Throws:
      SQLException - If no object found that implements the interface
      Since:
      JDK 1.6, HSQLDB 2.0

    • isWrapperFor

      public boolean isWrapperFor(Class<?> iface) throws SQLException
      Returns true if this either implements the interface argument or is directly or indirectly a wrapper for an object that does. Returns false otherwise. If this implements the interface then return true, else if this is a wrapper then return the result of recursively calling isWrapperFor on the wrapped object. If this does not implement the interface and is not a wrapper, return false. This method should be implemented as a low-cost operation compared to unwrap so that callers can use this method to avoid expensive unwrap calls that may fail. If this method returns true then calling unwrap with the same argument should succeed.
      Specified by:
      isWrapperFor in interface Wrapper
      Parameters:
      iface - a Class defining an interface.
      Returns:
      true if this implements the interface or directly or indirectly wraps an object that does.
      Throws:
      SQLException - if an error occurs while determining whether this is a wrapper for an object with the given interface.
      Since:
      JDK 1.6, HSQLDB 2.0

    • getLargeUpdateCount

      public long getLargeUpdateCount() throws SQLException
      Retrieves the current result as an update count; if the result is a ResultSet object or there are no more results, -1 is returned. This method should be called only once per result.

      This method should be used when the returned row count may exceed Integer.MAX_VALUE.

      The public implementation will throw UnsupportedOperationException

      Specified by:
      getLargeUpdateCount in interface Statement
      Returns:
      the current result as an update count; -1 if the current result is a ResultSet object or there are no more results
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      Since:
      1.8
      See Also:

    • setLargeMaxRows

      public void setLargeMaxRows(long max) throws SQLException
      Sets the limit for the maximum number of rows that any ResultSet object generated by this Statement object can contain to the given number. If the limit is exceeded, the excess rows are silently dropped.

      This method should be used when the row limit may exceed Integer.MAX_VALUE.

      The default implementation will throw UnsupportedOperationException

      Specified by:
      setLargeMaxRows in interface Statement
      Parameters:
      max - the new max rows limit; zero means there is no limit
      Throws:
      SQLException - if a database access error occurs, this method is called on a closed Statement or the condition max >= 0 is not satisfied
      Since:
      1.8
      See Also:

    • getLargeMaxRows

      public long getLargeMaxRows() throws SQLException
      Retrieves the maximum number of rows that a ResultSet object produced by this Statement object can contain. If this limit is exceeded, the excess rows are silently dropped.

      This method should be used when the returned row limit may exceed Integer.MAX_VALUE.

      The default implementation will return 0

      Specified by:
      getLargeMaxRows in interface Statement
      Returns:
      the current maximum number of rows for a ResultSet object produced by this Statement object; zero means there is no limit
      Throws:
      SQLException - if a database access error occurs or this method is called on a closed Statement
      Since:
      1.8
      See Also:

    • executeLargeBatch

      public long[] executeLargeBatch() throws SQLException
      Submits a batch of commands to the database for execution and if all commands execute successfully, returns an array of update counts. The long elements of the array that is returned are ordered to correspond to the commands in the batch, which are ordered according to the order in which they were added to the batch. The elements in the array returned by the method executeLargeBatch may be one of the following:
      1. A number greater than or equal to zero -- indicates that the command was processed successfully and is an update count giving the number of rows in the database that were affected by the command's execution
      2. A value of SUCCESS_NO_INFO -- indicates that the command was processed successfully but that the number of rows affected is unknown

        If one of the commands in a batch update fails to execute properly, this method throws a BatchUpdateException, and a JDBC driver may or may not continue to process the remaining commands in the batch. However, the driver's behavior must be consistent with a particular DBMS, either always continuing to process commands or never continuing to process commands. If the driver continues processing after a failure, the array returned by the method BatchUpdateException.getLargeUpdateCounts will contain as many elements as there are commands in the batch, and at least one of the elements will be the following:

      3. A value of EXECUTE_FAILED -- indicates that the command failed to execute successfully and occurs only if a driver continues to process commands after a command fails

      This method should be used when the returned row count may exceed Integer.MAX_VALUE.

      The default implementation will throw UnsupportedOperationException

      Specified by:
      executeLargeBatch in interface Statement
      Returns:
      an array of update counts containing one element for each command in the batch. The elements of the array are ordered according to the order in which commands were added to the batch.
      Throws:
      SQLException - if a database access error occurs, this method is called on a closed Statement or the driver does not support batch statements. Throws BatchUpdateException (a subclass of SQLException) if one of the commands sent to the database fails to execute properly or attempts to return a result set.
      SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement
      Since:
      1.8
      See Also:

    • setObject

      public void setObject(int parameterIndex, Object x, SQLType targetSqlType, int scaleOrLength) throws SQLException

      Sets the value of the designated parameter with the given object. If the second argument is an InputStream then the stream must contain the number of bytes specified by scaleOrLength. If the second argument is a Reader then the reader must contain the number of characters specified by scaleOrLength. If these conditions are not true the driver will generate a SQLException when the prepared statement is executed.

      The given Java object will be converted to the given targetSqlType before being sent to the database. If the object has a custom mapping (is of a class implementing the interface SQLData), the JDBC driver should call the method SQLData.writeSQL to write it to the SQL data stream. If, on the other hand, the object is of a class implementing Ref, Blob, Clob, NClob, Struct, java.net.URL, or Array, the driver should pass it to the database as a value of the corresponding SQL type.

      Note that this method may be used to pass database-specific abstract data types.

      The default implementation will throw SQLFeatureNotSupportedException

      Specified by:
      setObject in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the object containing the input parameter value
      targetSqlType - the SQL type to be sent to the database. The scale argument may further qualify this type.
      scaleOrLength - for java.sql.JDBCType.DECIMAL or java.sql.JDBCType.NUMERIC types, this is the number of digits after the decimal point. For Java Object types InputStream and Reader, this is the length of the data in the stream or reader. For all other types, this value will be ignored.
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement or if the Java Object specified by x is an InputStream or Reader object and the value of the scale parameter is less than zero
      SQLFeatureNotSupportedException - if the JDBC driver does not support the specified targetSqlType
      Since:
      1.8
      See Also:

    • setObject

      public void setObject(int parameterIndex, Object x, SQLType targetSqlType) throws SQLException
      Sets the value of the designated parameter with the given object. This method is similar to setObject(int parameterIndex, Object x, SQLType targetSqlType, int scaleOrLength), except that it assumes a scale of zero.

      The default implementation will throw SQLFeatureNotSupportedException

      Specified by:
      setObject in interface PreparedStatement
      Parameters:
      parameterIndex - the first parameter is 1, the second is 2, ...
      x - the object containing the input parameter value
      targetSqlType - the SQL type to be sent to the database
      Throws:
      SQLException - if parameterIndex does not correspond to a parameter marker in the SQL statement; if a database access error occurs or this method is called on a closed PreparedStatement
      SQLFeatureNotSupportedException - if the JDBC driver does not support the specified targetSqlType
      Since:
      1.8
      See Also:

    • executeLargeUpdate

      public long executeLargeUpdate() throws SQLException
      Executes the SQL statement in this PreparedStatement object, which must be an SQL Data Manipulation Language (DML) statement, such as INSERT, UPDATE or DELETE; or an SQL statement that returns nothing, such as a DDL statement.

      This method should be used when the returned row count may exceed Integer.MAX_VALUE.

      The default implementation will throw UnsupportedOperationException

      Specified by:
      executeLargeUpdate in interface PreparedStatement
      Returns:
      either (1) the row count for SQL Data Manipulation Language (DML) statements or (2) 0 for SQL statements that return nothing
      Throws:
      SQLException - if a database access error occurs; this method is called on a closed PreparedStatement or the SQL statement returns a ResultSet object
      SQLTimeoutException - when the driver has determined that the timeout value that was specified by the setQueryTimeout method has been exceeded and has at least attempted to cancel the currently running Statement
      Since:
      1.8

    • getSQL

      public String getSQL()

    • getStatementID

      public long getStatementID()

    • isRowCount

      public boolean isRowCount()

    • getResultSetMetaData

      public JDBCResultSetMetaData getResultSetMetaData()

    • getParameterMetaDataDirect

      public org.hsqldb.result.ResultMetaData getParameterMetaDataDirect()

    • closeOnCompletion

      public void closeOnCompletion() throws SQLException
      Specifies that this Statement will be closed when all its dependent result sets are closed. If execution of the Statement does not produce any result sets, this method has no effect.

      Note: Multiple calls to closeOnCompletion do not toggle the effect on this Statement. However, a call to closeOnCompletion does effect both the subsequent execution of statements, and statements that currently have open, dependent, result sets.

      Throws:
      SQLException - if this method is called on a closed Statement
      Since:
      JDK 1.7, HSQLDB 2.0.1

    • isCloseOnCompletion

      public boolean isCloseOnCompletion() throws SQLException
      Returns a value indicating whether this Statement will be closed when all its dependent result sets are closed.
      Returns:
      true if the Statement will be closed when all of its dependent result sets are closed; false otherwise
      Throws:
      SQLException - if this method is called on a closed Statement
      Since:
      JDK 1.7, HSQLDB 2.0.1