Package com.amazonaws.services.rds.model

Class CreateDBInstanceReadReplicaRequest

    • Constructor Detail

      • CreateDBInstanceReadReplicaRequest

        public CreateDBInstanceReadReplicaRequest()
        Default constructor for CreateDBInstanceReadReplicaRequest object. Callers should use the setter or fluent setter (with...) methods to initialize the object after creating it.

      • CreateDBInstanceReadReplicaRequest

        public CreateDBInstanceReadReplicaRequest​(String dBInstanceIdentifier,
                                          String sourceDBInstanceIdentifier)
        Constructs a new CreateDBInstanceReadReplicaRequest object. Callers should use the setter or fluent setter (with...) methods to initialize any additional object members.
        Parameters:
        dBInstanceIdentifier - The DB instance identifier of the Read Replica. This identifier is the unique key that identifies a DB instance. This parameter is stored as a lowercase string.
        sourceDBInstanceIdentifier - The identifier of the DB instance that will act as the source for the Read Replica. Each DB instance can have up to five Read Replicas.

        Constraints:

        • Must be the identifier of an existing MySQL, MariaDB, or PostgreSQL DB instance.
        • Can specify a DB instance that is a MySQL Read Replica only if the source is running MySQL 5.6.
        • Can specify a DB instance that is a PostgreSQL Read Replica only if the source is running PostgreSQL 9.3.5.
        • The specified DB instance must have automatic backups enabled, its backup retention period must be greater than 0.
        • If the source DB instance is in the same region as the Read Replica, specify a valid DB instance identifier.
        • If the source DB instance is in a different region than the Read Replica, specify a valid DB instance ARN. For more information, go to Constructing a Amazon RDS Amazon Resource Name (ARN).

    • Method Detail

      • setDBInstanceIdentifier

        public void setDBInstanceIdentifier​(String dBInstanceIdentifier)

        The DB instance identifier of the Read Replica. This identifier is the unique key that identifies a DB instance. This parameter is stored as a lowercase string.

        Parameters:
        dBInstanceIdentifier - The DB instance identifier of the Read Replica. This identifier is the unique key that identifies a DB instance. This parameter is stored as a lowercase string.

      • getDBInstanceIdentifier

        public String getDBInstanceIdentifier()

        The DB instance identifier of the Read Replica. This identifier is the unique key that identifies a DB instance. This parameter is stored as a lowercase string.

        Returns:
        The DB instance identifier of the Read Replica. This identifier is the unique key that identifies a DB instance. This parameter is stored as a lowercase string.

      • withDBInstanceIdentifier

        public CreateDBInstanceReadReplicaRequest withDBInstanceIdentifier​(String dBInstanceIdentifier)

        The DB instance identifier of the Read Replica. This identifier is the unique key that identifies a DB instance. This parameter is stored as a lowercase string.

        Parameters:
        dBInstanceIdentifier - The DB instance identifier of the Read Replica. This identifier is the unique key that identifies a DB instance. This parameter is stored as a lowercase string.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • setSourceDBInstanceIdentifier

        public void setSourceDBInstanceIdentifier​(String sourceDBInstanceIdentifier)

        The identifier of the DB instance that will act as the source for the Read Replica. Each DB instance can have up to five Read Replicas.

        Constraints:

        • Must be the identifier of an existing MySQL, MariaDB, or PostgreSQL DB instance.
        • Can specify a DB instance that is a MySQL Read Replica only if the source is running MySQL 5.6.
        • Can specify a DB instance that is a PostgreSQL Read Replica only if the source is running PostgreSQL 9.3.5.
        • The specified DB instance must have automatic backups enabled, its backup retention period must be greater than 0.
        • If the source DB instance is in the same region as the Read Replica, specify a valid DB instance identifier.
        • If the source DB instance is in a different region than the Read Replica, specify a valid DB instance ARN. For more information, go to Constructing a Amazon RDS Amazon Resource Name (ARN).
        Parameters:
        sourceDBInstanceIdentifier - The identifier of the DB instance that will act as the source for the Read Replica. Each DB instance can have up to five Read Replicas.

        Constraints:

        • Must be the identifier of an existing MySQL, MariaDB, or PostgreSQL DB instance.
        • Can specify a DB instance that is a MySQL Read Replica only if the source is running MySQL 5.6.
        • Can specify a DB instance that is a PostgreSQL Read Replica only if the source is running PostgreSQL 9.3.5.
        • The specified DB instance must have automatic backups enabled, its backup retention period must be greater than 0.
        • If the source DB instance is in the same region as the Read Replica, specify a valid DB instance identifier.
        • If the source DB instance is in a different region than the Read Replica, specify a valid DB instance ARN. For more information, go to Constructing a Amazon RDS Amazon Resource Name (ARN).

      • getSourceDBInstanceIdentifier

        public String getSourceDBInstanceIdentifier()

        The identifier of the DB instance that will act as the source for the Read Replica. Each DB instance can have up to five Read Replicas.

        Constraints:

        • Must be the identifier of an existing MySQL, MariaDB, or PostgreSQL DB instance.
        • Can specify a DB instance that is a MySQL Read Replica only if the source is running MySQL 5.6.
        • Can specify a DB instance that is a PostgreSQL Read Replica only if the source is running PostgreSQL 9.3.5.
        • The specified DB instance must have automatic backups enabled, its backup retention period must be greater than 0.
        • If the source DB instance is in the same region as the Read Replica, specify a valid DB instance identifier.
        • If the source DB instance is in a different region than the Read Replica, specify a valid DB instance ARN. For more information, go to Constructing a Amazon RDS Amazon Resource Name (ARN).
        Returns:
        The identifier of the DB instance that will act as the source for the Read Replica. Each DB instance can have up to five Read Replicas.

        Constraints:

        • Must be the identifier of an existing MySQL, MariaDB, or PostgreSQL DB instance.
        • Can specify a DB instance that is a MySQL Read Replica only if the source is running MySQL 5.6.
        • Can specify a DB instance that is a PostgreSQL Read Replica only if the source is running PostgreSQL 9.3.5.
        • The specified DB instance must have automatic backups enabled, its backup retention period must be greater than 0.
        • If the source DB instance is in the same region as the Read Replica, specify a valid DB instance identifier.
        • If the source DB instance is in a different region than the Read Replica, specify a valid DB instance ARN. For more information, go to Constructing a Amazon RDS Amazon Resource Name (ARN).

      • withSourceDBInstanceIdentifier

        public CreateDBInstanceReadReplicaRequest withSourceDBInstanceIdentifier​(String sourceDBInstanceIdentifier)

        The identifier of the DB instance that will act as the source for the Read Replica. Each DB instance can have up to five Read Replicas.

        Constraints:

        • Must be the identifier of an existing MySQL, MariaDB, or PostgreSQL DB instance.
        • Can specify a DB instance that is a MySQL Read Replica only if the source is running MySQL 5.6.
        • Can specify a DB instance that is a PostgreSQL Read Replica only if the source is running PostgreSQL 9.3.5.
        • The specified DB instance must have automatic backups enabled, its backup retention period must be greater than 0.
        • If the source DB instance is in the same region as the Read Replica, specify a valid DB instance identifier.
        • If the source DB instance is in a different region than the Read Replica, specify a valid DB instance ARN. For more information, go to Constructing a Amazon RDS Amazon Resource Name (ARN).
        Parameters:
        sourceDBInstanceIdentifier - The identifier of the DB instance that will act as the source for the Read Replica. Each DB instance can have up to five Read Replicas.

        Constraints:

        • Must be the identifier of an existing MySQL, MariaDB, or PostgreSQL DB instance.
        • Can specify a DB instance that is a MySQL Read Replica only if the source is running MySQL 5.6.
        • Can specify a DB instance that is a PostgreSQL Read Replica only if the source is running PostgreSQL 9.3.5.
        • The specified DB instance must have automatic backups enabled, its backup retention period must be greater than 0.
        • If the source DB instance is in the same region as the Read Replica, specify a valid DB instance identifier.
        • If the source DB instance is in a different region than the Read Replica, specify a valid DB instance ARN. For more information, go to Constructing a Amazon RDS Amazon Resource Name (ARN).
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • setDBInstanceClass

        public void setDBInstanceClass​(String dBInstanceClass)

        The compute and memory capacity of the Read Replica.

        Valid Values: db.m1.small | db.m1.medium | db.m1.large | db.m1.xlarge | db.m2.xlarge |db.m2.2xlarge | db.m2.4xlarge | db.m3.medium | db.m3.large | db.m3.xlarge | db.m3.2xlarge | db.m4.large | db.m4.xlarge | db.m4.2xlarge | db.m4.4xlarge | db.m4.10xlarge | db.r3.large | db.r3.xlarge | db.r3.2xlarge | db.r3.4xlarge | db.r3.8xlarge | db.t2.micro | db.t2.small | db.t2.medium | db.t2.large

        Default: Inherits from the source DB instance.

        Parameters:
        dBInstanceClass - The compute and memory capacity of the Read Replica.

        Valid Values: db.m1.small | db.m1.medium | db.m1.large | db.m1.xlarge | db.m2.xlarge |db.m2.2xlarge | db.m2.4xlarge | db.m3.medium | db.m3.large | db.m3.xlarge | db.m3.2xlarge | db.m4.large | db.m4.xlarge | db.m4.2xlarge | db.m4.4xlarge | db.m4.10xlarge | db.r3.large | db.r3.xlarge | db.r3.2xlarge | db.r3.4xlarge | db.r3.8xlarge | db.t2.micro | db.t2.small | db.t2.medium | db.t2.large

        Default: Inherits from the source DB instance.

      • getDBInstanceClass

        public String getDBInstanceClass()

        The compute and memory capacity of the Read Replica.

        Valid Values: db.m1.small | db.m1.medium | db.m1.large | db.m1.xlarge | db.m2.xlarge |db.m2.2xlarge | db.m2.4xlarge | db.m3.medium | db.m3.large | db.m3.xlarge | db.m3.2xlarge | db.m4.large | db.m4.xlarge | db.m4.2xlarge | db.m4.4xlarge | db.m4.10xlarge | db.r3.large | db.r3.xlarge | db.r3.2xlarge | db.r3.4xlarge | db.r3.8xlarge | db.t2.micro | db.t2.small | db.t2.medium | db.t2.large

        Default: Inherits from the source DB instance.

        Returns:
        The compute and memory capacity of the Read Replica.

        Valid Values: db.m1.small | db.m1.medium | db.m1.large | db.m1.xlarge | db.m2.xlarge |db.m2.2xlarge | db.m2.4xlarge | db.m3.medium | db.m3.large | db.m3.xlarge | db.m3.2xlarge | db.m4.large | db.m4.xlarge | db.m4.2xlarge | db.m4.4xlarge | db.m4.10xlarge | db.r3.large | db.r3.xlarge | db.r3.2xlarge | db.r3.4xlarge | db.r3.8xlarge | db.t2.micro | db.t2.small | db.t2.medium | db.t2.large

        Default: Inherits from the source DB instance.

      • withDBInstanceClass

        public CreateDBInstanceReadReplicaRequest withDBInstanceClass​(String dBInstanceClass)

        The compute and memory capacity of the Read Replica.

        Valid Values: db.m1.small | db.m1.medium | db.m1.large | db.m1.xlarge | db.m2.xlarge |db.m2.2xlarge | db.m2.4xlarge | db.m3.medium | db.m3.large | db.m3.xlarge | db.m3.2xlarge | db.m4.large | db.m4.xlarge | db.m4.2xlarge | db.m4.4xlarge | db.m4.10xlarge | db.r3.large | db.r3.xlarge | db.r3.2xlarge | db.r3.4xlarge | db.r3.8xlarge | db.t2.micro | db.t2.small | db.t2.medium | db.t2.large

        Default: Inherits from the source DB instance.

        Parameters:
        dBInstanceClass - The compute and memory capacity of the Read Replica.

        Valid Values: db.m1.small | db.m1.medium | db.m1.large | db.m1.xlarge | db.m2.xlarge |db.m2.2xlarge | db.m2.4xlarge | db.m3.medium | db.m3.large | db.m3.xlarge | db.m3.2xlarge | db.m4.large | db.m4.xlarge | db.m4.2xlarge | db.m4.4xlarge | db.m4.10xlarge | db.r3.large | db.r3.xlarge | db.r3.2xlarge | db.r3.4xlarge | db.r3.8xlarge | db.t2.micro | db.t2.small | db.t2.medium | db.t2.large

        Default: Inherits from the source DB instance.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • setAvailabilityZone

        public void setAvailabilityZone​(String availabilityZone)

        The Amazon EC2 Availability Zone that the Read Replica will be created in.

        Default: A random, system-chosen Availability Zone in the endpoint's region.

        Example: us-east-1d

        Parameters:
        availabilityZone - The Amazon EC2 Availability Zone that the Read Replica will be created in.

        Default: A random, system-chosen Availability Zone in the endpoint's region.

        Example: us-east-1d

      • getAvailabilityZone

        public String getAvailabilityZone()

        The Amazon EC2 Availability Zone that the Read Replica will be created in.

        Default: A random, system-chosen Availability Zone in the endpoint's region.

        Example: us-east-1d

        Returns:
        The Amazon EC2 Availability Zone that the Read Replica will be created in.

        Default: A random, system-chosen Availability Zone in the endpoint's region.

        Example: us-east-1d

      • withAvailabilityZone

        public CreateDBInstanceReadReplicaRequest withAvailabilityZone​(String availabilityZone)

        The Amazon EC2 Availability Zone that the Read Replica will be created in.

        Default: A random, system-chosen Availability Zone in the endpoint's region.

        Example: us-east-1d

        Parameters:
        availabilityZone - The Amazon EC2 Availability Zone that the Read Replica will be created in.

        Default: A random, system-chosen Availability Zone in the endpoint's region.

        Example: us-east-1d

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • setPort

        public void setPort​(Integer port)

        The port number that the DB instance uses for connections.

        Default: Inherits from the source DB instance

        Valid Values: 1150-65535

        Parameters:
        port - The port number that the DB instance uses for connections.

        Default: Inherits from the source DB instance

        Valid Values: 1150-65535

      • getPort

        public Integer getPort()

        The port number that the DB instance uses for connections.

        Default: Inherits from the source DB instance

        Valid Values: 1150-65535

        Returns:
        The port number that the DB instance uses for connections.

        Default: Inherits from the source DB instance

        Valid Values: 1150-65535

      • withPort

        public CreateDBInstanceReadReplicaRequest withPort​(Integer port)

        The port number that the DB instance uses for connections.

        Default: Inherits from the source DB instance

        Valid Values: 1150-65535

        Parameters:
        port - The port number that the DB instance uses for connections.

        Default: Inherits from the source DB instance

        Valid Values: 1150-65535

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • setAutoMinorVersionUpgrade

        public void setAutoMinorVersionUpgrade​(Boolean autoMinorVersionUpgrade)

        Indicates that minor engine upgrades will be applied automatically to the Read Replica during the maintenance window.

        Default: Inherits from the source DB instance

        Parameters:
        autoMinorVersionUpgrade - Indicates that minor engine upgrades will be applied automatically to the Read Replica during the maintenance window.

        Default: Inherits from the source DB instance

      • getAutoMinorVersionUpgrade

        public Boolean getAutoMinorVersionUpgrade()

        Indicates that minor engine upgrades will be applied automatically to the Read Replica during the maintenance window.

        Default: Inherits from the source DB instance

        Returns:
        Indicates that minor engine upgrades will be applied automatically to the Read Replica during the maintenance window.

        Default: Inherits from the source DB instance

      • withAutoMinorVersionUpgrade

        public CreateDBInstanceReadReplicaRequest withAutoMinorVersionUpgrade​(Boolean autoMinorVersionUpgrade)

        Indicates that minor engine upgrades will be applied automatically to the Read Replica during the maintenance window.

        Default: Inherits from the source DB instance

        Parameters:
        autoMinorVersionUpgrade - Indicates that minor engine upgrades will be applied automatically to the Read Replica during the maintenance window.

        Default: Inherits from the source DB instance

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • isAutoMinorVersionUpgrade

        public Boolean isAutoMinorVersionUpgrade()

        Indicates that minor engine upgrades will be applied automatically to the Read Replica during the maintenance window.

        Default: Inherits from the source DB instance

        Returns:
        Indicates that minor engine upgrades will be applied automatically to the Read Replica during the maintenance window.

        Default: Inherits from the source DB instance

      • setIops

        public void setIops​(Integer iops)

        The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for the DB instance.

        Parameters:
        iops - The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for the DB instance.

      • getIops

        public Integer getIops()

        The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for the DB instance.

        Returns:
        The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for the DB instance.

      • withIops

        public CreateDBInstanceReadReplicaRequest withIops​(Integer iops)

        The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for the DB instance.

        Parameters:
        iops - The amount of Provisioned IOPS (input/output operations per second) to be initially allocated for the DB instance.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • setOptionGroupName

        public void setOptionGroupName​(String optionGroupName)

        The option group the DB instance will be associated with. If omitted, the default option group for the engine specified will be used.

        Parameters:
        optionGroupName - The option group the DB instance will be associated with. If omitted, the default option group for the engine specified will be used.

      • getOptionGroupName

        public String getOptionGroupName()

        The option group the DB instance will be associated with. If omitted, the default option group for the engine specified will be used.

        Returns:
        The option group the DB instance will be associated with. If omitted, the default option group for the engine specified will be used.

      • withOptionGroupName

        public CreateDBInstanceReadReplicaRequest withOptionGroupName​(String optionGroupName)

        The option group the DB instance will be associated with. If omitted, the default option group for the engine specified will be used.

        Parameters:
        optionGroupName - The option group the DB instance will be associated with. If omitted, the default option group for the engine specified will be used.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • setPubliclyAccessible

        public void setPubliclyAccessible​(Boolean publiclyAccessible)

        Specifies the accessibility options for the DB instance. A value of true specifies an Internet-facing instance with a publicly resolvable DNS name, which resolves to a public IP address. A value of false specifies an internal instance with a DNS name that resolves to a private IP address.

        Default: The default behavior varies depending on whether a VPC has been requested or not. The following list shows the default behavior in each case.

        • Default VPC:true
        • VPC:false

        If no DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be publicly accessible. If a specific DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be private.

        Parameters:
        publiclyAccessible - Specifies the accessibility options for the DB instance. A value of true specifies an Internet-facing instance with a publicly resolvable DNS name, which resolves to a public IP address. A value of false specifies an internal instance with a DNS name that resolves to a private IP address.

        Default: The default behavior varies depending on whether a VPC has been requested or not. The following list shows the default behavior in each case.

        • Default VPC:true
        • VPC:false

        If no DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be publicly accessible. If a specific DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be private.

      • getPubliclyAccessible

        public Boolean getPubliclyAccessible()

        Specifies the accessibility options for the DB instance. A value of true specifies an Internet-facing instance with a publicly resolvable DNS name, which resolves to a public IP address. A value of false specifies an internal instance with a DNS name that resolves to a private IP address.

        Default: The default behavior varies depending on whether a VPC has been requested or not. The following list shows the default behavior in each case.

        • Default VPC:true
        • VPC:false

        If no DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be publicly accessible. If a specific DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be private.

        Returns:
        Specifies the accessibility options for the DB instance. A value of true specifies an Internet-facing instance with a publicly resolvable DNS name, which resolves to a public IP address. A value of false specifies an internal instance with a DNS name that resolves to a private IP address.

        Default: The default behavior varies depending on whether a VPC has been requested or not. The following list shows the default behavior in each case.

        • Default VPC:true
        • VPC:false

        If no DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be publicly accessible. If a specific DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be private.

      • withPubliclyAccessible

        public CreateDBInstanceReadReplicaRequest withPubliclyAccessible​(Boolean publiclyAccessible)

        Specifies the accessibility options for the DB instance. A value of true specifies an Internet-facing instance with a publicly resolvable DNS name, which resolves to a public IP address. A value of false specifies an internal instance with a DNS name that resolves to a private IP address.

        Default: The default behavior varies depending on whether a VPC has been requested or not. The following list shows the default behavior in each case.

        • Default VPC:true
        • VPC:false

        If no DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be publicly accessible. If a specific DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be private.

        Parameters:
        publiclyAccessible - Specifies the accessibility options for the DB instance. A value of true specifies an Internet-facing instance with a publicly resolvable DNS name, which resolves to a public IP address. A value of false specifies an internal instance with a DNS name that resolves to a private IP address.

        Default: The default behavior varies depending on whether a VPC has been requested or not. The following list shows the default behavior in each case.

        • Default VPC:true
        • VPC:false

        If no DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be publicly accessible. If a specific DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be private.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • isPubliclyAccessible

        public Boolean isPubliclyAccessible()

        Specifies the accessibility options for the DB instance. A value of true specifies an Internet-facing instance with a publicly resolvable DNS name, which resolves to a public IP address. A value of false specifies an internal instance with a DNS name that resolves to a private IP address.

        Default: The default behavior varies depending on whether a VPC has been requested or not. The following list shows the default behavior in each case.

        • Default VPC:true
        • VPC:false

        If no DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be publicly accessible. If a specific DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be private.

        Returns:
        Specifies the accessibility options for the DB instance. A value of true specifies an Internet-facing instance with a publicly resolvable DNS name, which resolves to a public IP address. A value of false specifies an internal instance with a DNS name that resolves to a private IP address.

        Default: The default behavior varies depending on whether a VPC has been requested or not. The following list shows the default behavior in each case.

        • Default VPC:true
        • VPC:false

        If no DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be publicly accessible. If a specific DB subnet group has been specified as part of the request and the PubliclyAccessible value has not been set, the DB instance will be private.

      • getTags

        public List<Tag> getTags()
        Returns:

      • setTags

        public void setTags​(Collection<Tag> tags)
        Parameters:
        tags -

      • setDBSubnetGroupName

        public void setDBSubnetGroupName​(String dBSubnetGroupName)

        Specifies a DB subnet group for the DB instance. The new DB instance will be created in the VPC associated with the DB subnet group. If no DB subnet group is specified, then the new DB instance is not created in a VPC.

        Constraints:

        • Can only be specified if the source DB instance identifier specifies a DB instance in another region.
        • The specified DB subnet group must be in the same region in which the operation is running.
        • All Read Replicas in one region that are created from the same source DB instance must either:
          • Specify DB subnet groups from the same VPC. All these Read Replicas will be created in the same VPC.
          • Not specify a DB subnet group. All these Read Replicas will be created outside of any VPC.

        Constraints: Must contain no more than 255 alphanumeric characters, periods, underscores, spaces, or hyphens. Must not be default.

        Example: mySubnetgroup

        Parameters:
        dBSubnetGroupName - Specifies a DB subnet group for the DB instance. The new DB instance will be created in the VPC associated with the DB subnet group. If no DB subnet group is specified, then the new DB instance is not created in a VPC.

        Constraints:

        • Can only be specified if the source DB instance identifier specifies a DB instance in another region.
        • The specified DB subnet group must be in the same region in which the operation is running.
        • All Read Replicas in one region that are created from the same source DB instance must either:
          • Specify DB subnet groups from the same VPC. All these Read Replicas will be created in the same VPC.
          • Not specify a DB subnet group. All these Read Replicas will be created outside of any VPC.

        Constraints: Must contain no more than 255 alphanumeric characters, periods, underscores, spaces, or hyphens. Must not be default.

        Example: mySubnetgroup

      • getDBSubnetGroupName

        public String getDBSubnetGroupName()

        Specifies a DB subnet group for the DB instance. The new DB instance will be created in the VPC associated with the DB subnet group. If no DB subnet group is specified, then the new DB instance is not created in a VPC.

        Constraints:

        • Can only be specified if the source DB instance identifier specifies a DB instance in another region.
        • The specified DB subnet group must be in the same region in which the operation is running.
        • All Read Replicas in one region that are created from the same source DB instance must either:
          • Specify DB subnet groups from the same VPC. All these Read Replicas will be created in the same VPC.
          • Not specify a DB subnet group. All these Read Replicas will be created outside of any VPC.

        Constraints: Must contain no more than 255 alphanumeric characters, periods, underscores, spaces, or hyphens. Must not be default.

        Example: mySubnetgroup

        Returns:
        Specifies a DB subnet group for the DB instance. The new DB instance will be created in the VPC associated with the DB subnet group. If no DB subnet group is specified, then the new DB instance is not created in a VPC.

        Constraints:

        • Can only be specified if the source DB instance identifier specifies a DB instance in another region.
        • The specified DB subnet group must be in the same region in which the operation is running.
        • All Read Replicas in one region that are created from the same source DB instance must either:
          • Specify DB subnet groups from the same VPC. All these Read Replicas will be created in the same VPC.
          • Not specify a DB subnet group. All these Read Replicas will be created outside of any VPC.

        Constraints: Must contain no more than 255 alphanumeric characters, periods, underscores, spaces, or hyphens. Must not be default.

        Example: mySubnetgroup

      • withDBSubnetGroupName

        public CreateDBInstanceReadReplicaRequest withDBSubnetGroupName​(String dBSubnetGroupName)

        Specifies a DB subnet group for the DB instance. The new DB instance will be created in the VPC associated with the DB subnet group. If no DB subnet group is specified, then the new DB instance is not created in a VPC.

        Constraints:

        • Can only be specified if the source DB instance identifier specifies a DB instance in another region.
        • The specified DB subnet group must be in the same region in which the operation is running.
        • All Read Replicas in one region that are created from the same source DB instance must either:
          • Specify DB subnet groups from the same VPC. All these Read Replicas will be created in the same VPC.
          • Not specify a DB subnet group. All these Read Replicas will be created outside of any VPC.

        Constraints: Must contain no more than 255 alphanumeric characters, periods, underscores, spaces, or hyphens. Must not be default.

        Example: mySubnetgroup

        Parameters:
        dBSubnetGroupName - Specifies a DB subnet group for the DB instance. The new DB instance will be created in the VPC associated with the DB subnet group. If no DB subnet group is specified, then the new DB instance is not created in a VPC.

        Constraints:

        • Can only be specified if the source DB instance identifier specifies a DB instance in another region.
        • The specified DB subnet group must be in the same region in which the operation is running.
        • All Read Replicas in one region that are created from the same source DB instance must either:
          • Specify DB subnet groups from the same VPC. All these Read Replicas will be created in the same VPC.
          • Not specify a DB subnet group. All these Read Replicas will be created outside of any VPC.

        Constraints: Must contain no more than 255 alphanumeric characters, periods, underscores, spaces, or hyphens. Must not be default.

        Example: mySubnetgroup

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • setStorageType

        public void setStorageType​(String storageType)

        Specifies the storage type to be associated with the Read Replica.

        Valid values: standard | gp2 | io1

        If you specify io1, you must also include a value for the Iops parameter.

        Default: io1 if the Iops parameter is specified; otherwise standard

        Parameters:
        storageType - Specifies the storage type to be associated with the Read Replica.

        Valid values: standard | gp2 | io1

        If you specify io1, you must also include a value for the Iops parameter.

        Default: io1 if the Iops parameter is specified; otherwise standard

      • getStorageType

        public String getStorageType()

        Specifies the storage type to be associated with the Read Replica.

        Valid values: standard | gp2 | io1

        If you specify io1, you must also include a value for the Iops parameter.

        Default: io1 if the Iops parameter is specified; otherwise standard

        Returns:
        Specifies the storage type to be associated with the Read Replica.

        Valid values: standard | gp2 | io1

        If you specify io1, you must also include a value for the Iops parameter.

        Default: io1 if the Iops parameter is specified; otherwise standard

      • withStorageType

        public CreateDBInstanceReadReplicaRequest withStorageType​(String storageType)

        Specifies the storage type to be associated with the Read Replica.

        Valid values: standard | gp2 | io1

        If you specify io1, you must also include a value for the Iops parameter.

        Default: io1 if the Iops parameter is specified; otherwise standard

        Parameters:
        storageType - Specifies the storage type to be associated with the Read Replica.

        Valid values: standard | gp2 | io1

        If you specify io1, you must also include a value for the Iops parameter.

        Default: io1 if the Iops parameter is specified; otherwise standard

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • setCopyTagsToSnapshot

        public void setCopyTagsToSnapshot​(Boolean copyTagsToSnapshot)

        True to copy all tags from the Read Replica to snapshots of the Read Replica; otherwise false. The default is false.

        Parameters:
        copyTagsToSnapshot - True to copy all tags from the Read Replica to snapshots of the Read Replica; otherwise false. The default is false.

      • getCopyTagsToSnapshot

        public Boolean getCopyTagsToSnapshot()

        True to copy all tags from the Read Replica to snapshots of the Read Replica; otherwise false. The default is false.

        Returns:
        True to copy all tags from the Read Replica to snapshots of the Read Replica; otherwise false. The default is false.

      • withCopyTagsToSnapshot

        public CreateDBInstanceReadReplicaRequest withCopyTagsToSnapshot​(Boolean copyTagsToSnapshot)

        True to copy all tags from the Read Replica to snapshots of the Read Replica; otherwise false. The default is false.

        Parameters:
        copyTagsToSnapshot - True to copy all tags from the Read Replica to snapshots of the Read Replica; otherwise false. The default is false.
        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • isCopyTagsToSnapshot

        public Boolean isCopyTagsToSnapshot()

        True to copy all tags from the Read Replica to snapshots of the Read Replica; otherwise false. The default is false.

        Returns:
        True to copy all tags from the Read Replica to snapshots of the Read Replica; otherwise false. The default is false.

      • setMonitoringInterval

        public void setMonitoringInterval​(Integer monitoringInterval)

        The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the Read Replica. To disable collecting Enhanced Monitoring metrics, specify 0. The default is 60.

        If MonitoringRoleArn is specified, then you must also set MonitoringInterval to a value other than 0.

        Valid Values: 0, 1, 5, 10, 15, 30, 60

        Parameters:
        monitoringInterval - The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the Read Replica. To disable collecting Enhanced Monitoring metrics, specify 0. The default is 60.

        If MonitoringRoleArn is specified, then you must also set MonitoringInterval to a value other than 0.

        Valid Values: 0, 1, 5, 10, 15, 30, 60

      • getMonitoringInterval

        public Integer getMonitoringInterval()

        The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the Read Replica. To disable collecting Enhanced Monitoring metrics, specify 0. The default is 60.

        If MonitoringRoleArn is specified, then you must also set MonitoringInterval to a value other than 0.

        Valid Values: 0, 1, 5, 10, 15, 30, 60

        Returns:
        The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the Read Replica. To disable collecting Enhanced Monitoring metrics, specify 0. The default is 60.

        If MonitoringRoleArn is specified, then you must also set MonitoringInterval to a value other than 0.

        Valid Values: 0, 1, 5, 10, 15, 30, 60

      • withMonitoringInterval

        public CreateDBInstanceReadReplicaRequest withMonitoringInterval​(Integer monitoringInterval)

        The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the Read Replica. To disable collecting Enhanced Monitoring metrics, specify 0. The default is 60.

        If MonitoringRoleArn is specified, then you must also set MonitoringInterval to a value other than 0.

        Valid Values: 0, 1, 5, 10, 15, 30, 60

        Parameters:
        monitoringInterval - The interval, in seconds, between points when Enhanced Monitoring metrics are collected for the Read Replica. To disable collecting Enhanced Monitoring metrics, specify 0. The default is 60.

        If MonitoringRoleArn is specified, then you must also set MonitoringInterval to a value other than 0.

        Valid Values: 0, 1, 5, 10, 15, 30, 60

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • setMonitoringRoleArn

        public void setMonitoringRoleArn​(String monitoringRoleArn)

        The ARN for the IAM role that permits RDS to send enhanced monitoring metrics to CloudWatch Logs. For example, arn:aws:iam:123456789012:role/emaccess. For information on creating a monitoring role, go to To create an IAM role for Amazon RDS Enhanced Monitoring.

        If MonitoringInterval is set to a value other than 0, then you must supply a MonitoringRoleArn value.

        Parameters:
        monitoringRoleArn - The ARN for the IAM role that permits RDS to send enhanced monitoring metrics to CloudWatch Logs. For example, arn:aws:iam:123456789012:role/emaccess. For information on creating a monitoring role, go to To create an IAM role for Amazon RDS Enhanced Monitoring.

        If MonitoringInterval is set to a value other than 0, then you must supply a MonitoringRoleArn value.

      • getMonitoringRoleArn

        public String getMonitoringRoleArn()

        The ARN for the IAM role that permits RDS to send enhanced monitoring metrics to CloudWatch Logs. For example, arn:aws:iam:123456789012:role/emaccess. For information on creating a monitoring role, go to To create an IAM role for Amazon RDS Enhanced Monitoring.

        If MonitoringInterval is set to a value other than 0, then you must supply a MonitoringRoleArn value.

        Returns:
        The ARN for the IAM role that permits RDS to send enhanced monitoring metrics to CloudWatch Logs. For example, arn:aws:iam:123456789012:role/emaccess. For information on creating a monitoring role, go to To create an IAM role for Amazon RDS Enhanced Monitoring.

        If MonitoringInterval is set to a value other than 0, then you must supply a MonitoringRoleArn value.

      • withMonitoringRoleArn

        public CreateDBInstanceReadReplicaRequest withMonitoringRoleArn​(String monitoringRoleArn)

        The ARN for the IAM role that permits RDS to send enhanced monitoring metrics to CloudWatch Logs. For example, arn:aws:iam:123456789012:role/emaccess. For information on creating a monitoring role, go to To create an IAM role for Amazon RDS Enhanced Monitoring.

        If MonitoringInterval is set to a value other than 0, then you must supply a MonitoringRoleArn value.

        Parameters:
        monitoringRoleArn - The ARN for the IAM role that permits RDS to send enhanced monitoring metrics to CloudWatch Logs. For example, arn:aws:iam:123456789012:role/emaccess. For information on creating a monitoring role, go to To create an IAM role for Amazon RDS Enhanced Monitoring.

        If MonitoringInterval is set to a value other than 0, then you must supply a MonitoringRoleArn value.

        Returns:
        Returns a reference to this object so that method calls can be chained together.

      • toString

        public String toString()
        Returns a string representation of this object; useful for testing and debugging.
        Overrides:
        toString in class Object
        Returns:
        A string representation of this object.
        See Also:
        Object.toString()

      • hashCode

        public int hashCode()
        Overrides:
        hashCode in class Object