This is a port of GNU UnRTF 0.21.1 to MSDOS/DJGPP.


1.:     DJGPP specific changes.
        =======================

        To compile this package you will need a version of libsupp that provides
        snprintf() and vnsprnt().  Also the libiconv package will be required to
        compile the sources.  As usual all DJGPP specific changes to the sources
        are documented in the diffs dile stored in the /djgpp subdirectory.  Of
        corse, if you do not want to compile the sources you do not need to
        download and install both library packages at all.


2.:     Installing the binary package.
        ==============================

2.1.:   Copy the binary distribution into the top DJGPP installation directory,
        just unzip it preserving the directory structure running *ONE* of the
        following commands:
          unzip32 urtf211b.zip      or
          djtarx urtf211b.zip       or
          pkunzip -d urtf211b.zip

2.2.:   Read the man page and the html formated docs to become familiar with
        the product.


3.:     Building the binaries from sources.
        ===================================

3.1.:   To build the binaries you will need the following binary packages:
          djdev203.zip (patch level 2, see the djdev203.dsm or a later version)
          bsh205bbr3.zip (or a later but NOT a prior version)
          gccNNNb.zip, bnuNNNb.zip, makNNNb.zip,
          filNNNb.zip, shlNNNb.zip, txtNNb.zip,
        where NNN corresponds to the current versions.
        All this packages can be found in the v2gnu directory of any
        ftp.delorie.com mirror.

3.2.:   Create a temporary directory and copy the source package into the
        directory. If you download the source distribution from one of the
        DJGPP archives, just unzip it preserving the directory structure
        running *ONE* of the following commands:
          unzip32 urtf211s.zip      or
          djtarx urtf211s.zip       or
          pkunzip -d urtf211s.zip

3.3.:   If for some reason you want to reconfigure the package cd into the top
        srcdir (unrtf-0.211) and run the following commands:
          del djgpp\config.cache
          make distclean
          djgpp\config

        Please note that you *MUST* delete the config.cache file in the /djgpp
        subdir or you will not really reconfigure the sources because the
        configuration informations will be read from the cache file instead
        of being newly computed.
        To build the programs in a directory other than where the sources are,
        you must add the parameter that specifies the source directory,
        e.g:
          x:\src\gnu\unrtf-0.211\djgpp\config x:/src/gnu/unrtf-0.211

        Lets assume you want to build the binaries in a directory placed on a
        different drive (z:\build in this case) from where the sources are,
        then you will run the following commands:
          z:
          md \build
          cd \build
          x:\src\gnu\unrtf-0.211\djgpp\config x:/src/gnu/unrtf-0.211

        The order of the options and the srcdir option does not matter. You
        *MUST* use forward slashes to specify the source directory.

        The batch file will set same environment variables, make MSDOS specific
        modifications to the Makefile.ins and supply all other needed options
        to the configure script.

3.4.:   To compile the package run from the top srcdir the command:
          make

3.5.:   Now you can run the testsuite by issuing the command:
          make check
        No check shall fail.  Please note that the testsuite will not work until
        you have not installed the binaries.

3.6.:   To install the binary, info docs and man pages run the following command
        from the top srcdir:
          make install

        This will install the products into your DJGPP installation tree given
        by the default prefix "/dev/env/DJDIR". If you prefer to install them
        into some other directory you will have to set prefix to the appropiate
        value.
        Example:
          make install prefix=z:/some/other/dir



        Send GNU UnRTF specific bug reports to <bug-unrtf@gnu.org>.
        Send suggestions and bug reports concerning the DJGPP port to
        comp.os.msdos.djgpp or <djgpp@delorie.com>.


Enjoy.

        Guerrero, Juan Manuel <juan.guerrero@gmx.de>
