This is a port of GNU grep 2.7  to MSDOS/DJGPP.

1.:     DJGPP specific changes.
        =======================

        To be able to compile a working grep binary using djdev203 certain
        adjustments to $DJDIR/include/conio.h are needed so the name clash
        between gnulib's gettext wrapper and BORLAND's compatibility gettext
        is resolved.  To solve this issue you will need to apply the conio
        patch provided in the /djgpp directory.  This patch will change your
        djdev203 version of conio.h to the djdev204 version concerning the
        gettext naming.
        When paths are checked to be directories, the code has been changed to
        use access() instead of stat().  Due to amount of work that it is to
        compute the stat of the file, using access() should give certain speed
        improvement.
        This port offers colorization support.  Please read the documentation
        to learn how the default colors used can be changed.
        This port also offers perl-regexp (pcre) support so if you want to
        compile the sources you will have to install pcre library first.  This
        is available as:
          ftp://ftp.delorie.com/pub/djgpp/current/v2tk/pcre810b.zip
        or
          ftp://ftp.delorie.com/pub/djgpp/beta/v2tk/pcre810b.zip
        If you do not like this you will have to reconfigure and recompile the
        port passing the "no-pcre" command line option to config.bat.
        By default, the port is compiled with pcre support.
        To build this port and run the testsuite you will need LFN support.
        If you use djdev204 you will have to adjust your /dev/env/DJDIR/include/time.h.
        The _rdtsc declaration and definition both needs static as qualifier
        and the extern qualifier removed from the declaration.

        As usual, all djgpp specific files (config.bat, diffs, README files,
        etc.) are located in the djgpp subdir.

        For further information about GNU grep please read the info docs and NEWS file.


2.:     Installing the binary package.
        ==============================

2.1.:   Copy the binary distribution into the top DJGPP installation directory,
        just unzip it preserving the directory structure running *ONE* of the
        following commands:
          unzip32 grep27b.zip      or
          djtarx grep27b.zip       or
          pkunzip -d grep27b.zip


3.:     Building the binaries from sources.
        ===================================

3.1.:   Create a temporary directory and copy the source package into the
        directory.  If you download the source distribution from one of the
        DJGPP sites, just unzip it preserving the directory structure
        running *ONE* of the following commands:
          unzip32 grep27s.zip      or
          djtarx grep27s.zip       or
          pkunzip -d grep27s.zip

3.2.:   To build the binaries you will need the following binary packages:
          djdev203.zip (or a later but NOT a prior version)
          bsh205bbr3.zip (or a later but NOT a prior version)
          gccNNNb.zip, gppNNN.zip, bnuNNNb.zip, makNNNb.zip, filNNNb.zip,
          shlNNNb.zip, txtNNNb.zip, txiNNNb.zip, grepNNNb.zip, sedNNNb.zip,
          pcreNNNb.zip and gwkNNNb.zip.

        If you want to run the check you will need also:
          difNNNb.zip and mktmpNNNb.zip

        NNN represents the latest version number of the binary packages.  All
        this packages can be found in the /v2gnu directory of any
        ftp.delorie.com mirror.
        You will need bsh205bbr3.zip or later and *NOT* a prior version or
        the build will fail.  The same applies to djdev203.zip.

3.3.:   If for some reason you want to reconfigure the package cd into the top
        srcdir (grep-2.7) and run the following commands:
          del djgpp\config.cache
          make clean
          djgpp\config

        Please note that you *MUST* delete the config.cache file in the djgpp
        subdir or you will not really reconfigure the sources because the
        configuration informations will be read from the cache file instead
        of being newly computed.
        To build the programs in a directory other than where the sources are,
        you must add the parameter that specifies the source directory,
        e.g:
          x:\src\gnu\grep-2.7\djgpp\config x:/src/gnu/grep-2.7

        Lets assume you want to build the binaries in a directory placed on a
        different drive (z:\build in this case) from where the sources are,
        then you will run the following commands:
          z:
          md \build
          cd \build
          x:\src\gnu\grep-2.7\djgpp\config x:/src/gnu/grep-2.7

        The order of the options and the srcdir option does not matter.  You
        *MUST* use forward slashes to specify the source directory.

        The batch file will set same environment variables, make MSDOS specific
        modifications to the Makefile.in's and supply all other needed options
        to the configure script.

3.4.:   To compile the package run from the top srcdir the command:
          make

3.5.:   Now you can run the tests if you like.  Start the command:
          make check

        The yesno test will fail.  This is not a port issue.

3.6.:   To install the binaries, and info docs run the following command from
        the top srcdir:
          make install

        This will install the products into your DJGPP installation tree given
        by the default prefix "/dev/env/DJDIR".  If you prefer to install them
        into some other directory you will have to set prefix to the appropriate
        value:
          make install prefix=z:/some/other/place



        Send GNU grep specific bug reports to <bug-grep@gnu.org>.
        Send suggestions and bug reports concerning the DJGPP port to
        comp.os.msdos.djgpp or <djgpp@delorie.com>.


Enjoy.

        Guerrero, Juan Manuel <juan.guerrero@gmx.de>
