 =============================================================
	Release Notes on ZyXEL ISDN Configuration Manager V 3.23   11/04/1998
 =============================================================


¡¸. New features
=================

1.Support omni.net LCD+M, including TA F/W upgrade and interal modem
  protocol selection. 

2.Support Elite 2864I which F/W is v3.00 or higher

3.Support T-online service when country code is equal to 237 (German)

4.Add context sensitive help(press F1 will invoke help)

5.Provide more informational messages via the status bar

6.Add menu "LCD Time Settings" to set LCD time when TA's model
  is omni.net LCD/LCD+M.(Setting LCD Time from status bar is removed)

7.New menu arrangement, such as "phone services", "use Second DTE Port" etc.

8.Change memu item "Configuration settings" to "General settings"

9.Brand-new graphics user interface for DSS1 phone services.

10.For USA phone services, ICM will enable/disable releated controls with
   respect to current switch settings

11.Remove capi from ICM installation program. CAPI has it's own installation
   program from now on.



¡¸. Fixed bugs
===============

1.User interface response time is sluggish.

2.The Outgoing Protocol Control pull down list is not read-only.

3.Some errors related to B-channel protocol settings.For example,
  B-channel protocol Auto and V110 for USA were not correctly
  implemented.

4.Cannot open COM port xyz, where x is equal to 1, 2, 3, or 4.

5."phone services" for Elite 2864I doesn't work properly.

6."File save/retrieving" cannot really save/restore TA's settings.

7.Other miscellaneous bugs.
		   