
This ZIP archive contains the ZyXEL firmware v1.51(A.00) | 06/25/1999
for the ZyXEL Prestige 2864I ISDN router.

Also included is the factory default setting file "ROMFILE0". You will 
not need it unless you must reset all the Prestige's parameters, including
the SMT password. Please see "How To Upgrade Prestige" section in release
notes for how to upgrade your Prestige.


There exist three ZIP files:
----------------------------------------------------
p2864ie.zip for "European (DSS1)" ISDN switch type
p2864ia.zip for "American (USA)"  ISDN switch types
p2864ig.zip for "German (1TR6)"   ISDN switch type
----------------------------------------------------
Choose the correct file for your area. 
Each has a binary file for your region !


The contents of these ZIP files are:
------------------------------------
README.TXT ................ This file

RAS3-B.BIN ................ binary RAS firmware v1.51(A.00) | 06/25/1999
                            use the command 'ATUR' to flash!

p2864iE.BIN ............... binary ISDN firmware v4.13e
                            for European (DSS1) ISDN switch type
                            use the commands 'ATIS', 'ATRS', 'ATUPX' to flash!
or
p2864iA.BIN ............... binary ISDN firmware v4.13e
                            for American (USA) ISDN switch types
                            use the commands 'ATIS', 'ATRS', 'ATUPX' to flash!
or
p2864iG.BIN ............... binary ISDN firmware v4.13e
                            for German (1TR6) ISDN switch type
                            use the commands 'ATIS', 'ATRS', 'ATUPX' to flash!

ROMFILE0 .................. Factory default settings for P2864I
                            use the command 'ATUR3' to flash!

p2864i_v1.51(A.00).pdf .... Release Notes, Adobe Portable Format (Acrobat)
p2864i_v1.51(A.00).rtf ....       -"-    , Rich Tech Format
p2864i_v1.51(A.00).doc ....       -"-    , Microsoft WinWord9x/6.0 format

ZPKTTOOL.EXE .............. ZyXEL's "PKT-TOOL", PPP and IP packet interpreter
                            v0.14 - for DOS
                            use Prestige's CI command sequences:
                            1.) sys trcl cl
                            2.) sys trcl sw on
                            3.) sys trcp sw on
                            4.) ... connect to remote node
                                    for example: isdn dial 1
                            5.) ... disconnect from remote node
                                    for example: isdn drop all
                            6.) sys trcl disp
                            7.) save the dumped tracelog with PKT/PPP/IP data to
                                an ASCII text file.
                            8.) start ZPKT-tool and 'load file', input the name
                                of previous stored ASCII text file.
                            9.) the ZPKT-tool will now interpret all the dumped
                                HEX data and will display the PPP and IP Protocol.
                                You may save this interpreted data into another
                                ASCII text file for further study.


electronic greetings from Vienna, Austria
Manfred Recla
**********************************************************
 ZyXEL European File Distribution - Coordination Center
 E-Mail: support@europe.zyxel.com
 FTP:    ftp://ftp.europe.zyxel.com
 WWW:    http://www.europe.zyxel.com
 NEWS:   news://news.europe.zyxel.com
**********************************************************

