CI Command Reference

CI Command Reference

System Related Command
ISDN Command
Ethernet Command
TCP/IP Protocol Command

C/I command is a set of command-based user interface can be entered from SMT Menu 24.8. It is recommended to configure Prestige through SMT and PNC.

Command Syntax and General User Interface

C/I has the following command syntax:

command <face | device > subcommand [Parma]
command subcommand [Parma]
command ? | help
command subcommand ? | help

General user interface:

1.	?	Shows the following commands and all major (sub)commands
2	exit	Returns to SMT

Main Menu

Main Menu command summary:

1.	sys	for system wide configuration
2.	ether	for LAN debugging
3.	isdn	for ISDN firmware
4.	ip	for Internet TCP/IP protocol family

System Related Commands

Cmd	Sub-cmd	Sub-cmd	Parameter	Description
sys	callhist	display		Display the call history
	callhist	remove	entry	Remove entry from call history
	conutrycode		0xd8 ~ 0xff	Set country code
	edit		<filename>	Edit a text file
	extraphnum	add	<set 1-3><1st phone number> [2nd phone number	Add phone number(s) to set 1-3
	extraphnum	display		Dislay extra phone numbers
	extraphnum	node	<node number>	Set extra phone numbers to node n
	extraphnum	remove	<set 1-3>	Remove set
	extraphnum	reset		Reset all extra phone number
	feature			Display feature bit
	hostname		new hostname	Edit hostname of Prestige
	log	online		Syslog related commands
	log	disp		Display the log
	log	clear		Clear the log
	stdio		[second]	Change terminal timeout value
	syslog	server	<server IP address>	Identify the UNIX syslog server
	syslog	facility	<number>	Choose what kind of facility should we use
	syslog	type	<hex number>	Choose what category can we send out
	syslog	mode	<on\|off>	Enable/disable syslog function
	trcdisp			Display packet trace online
	trclog	call		Display call event
	trclog	switch	<on\|off>	Trun on\|off trace log
	trclog	type	<value>	Set trace type of trace log
	trclog	level	<value>	Set trace level of trace log#: 1-10
	trclog	disp		Display trace log
	trclog	online	[on\|off]	Turn on/off online display
	trcpacket			Packet trace related commands
	trcpacket	create	<net#><encase>	max. net#:64 ; max. encase: 256
	trcpacket	destroy		Packet trace related
	trcpacket	type	<lan\|wan1\|wan2] <none\|incoming\|outgoing\|bothway>	Set the types of packets to be logged
	trcpacket	switch	[on\|off]	Turn on\|off the packet trace
	trcpacket	disp		Display packet trace
	trcpaket	up	<IPAddr><UdpPort>	Send packet trace to other system
	version			Display RAS code and driver version
	view			Display RAS code and driver version
	wdog	switch	[on\|off]	Set on\|off watch log
	wdog	cnt	<value>	Display watchdog count value:0-34463
	socket			Display socket status
	filter	disp		Display filter statistic counters
	filter	clear		Clear filter statistic counters
	cpu			Display CPU load

ISDN Commands

Cmd	Sub-cmd	Sub-cmd	Parameter	Description
isdn	config			Display ISDN configuration, block, line, channel
	fw	analyzer	[on\|off]	Turn on/off ISDN EPA trace
	fw	analyzer	disp	Display ISDN EPA trace with decoding
	fw	analyzer	dump	Dump ISDN EPA trace with binary
	oos		bri0~bri3	Set channel out of service
	is		bri0 ~ bri3	Set channel in service

Ethernet Commands

Cmd	Sub-cmd	Sun-cmd	Parameter	Description
ether	config			Display Ethernet configuration
	driver	cnt	disp<ch-name>	Display Ethernet counter
	driver	status	<ch-name>	Display Ethernet status
	version			Display Ethernet version

TCP/IP Protocol Commands

<hostid> format : xxx.xxx.xxx.xxx (Ip Address)
<ether addr> format : xx.xx.xx.xx.xx.xx
<iface> : enif0
<gw> : gateway ip address

Cmd	Sub-cmd	Sub-cmd	Parameter	Description
ip	address			Display host IP address
	arp	status		Display IP ARP status
	dhcp	<iface-name>	client release	Release DHCP client IP
	dhcp	<iface-name>	client renew	Renew DHCP client IP
	dhcp	<iface-name>	status	Display iface DHCP information
	dns	table		Display DNS table
	dns	status	[disp\|clear]	Display or clear DNS statistics
	icmp	status	[display\|clear]	Display or clear ICMP statistics
	icmp	discovery	<iface>[on\|off]	ICMP router discovery
	ifconfig			Display interface configuration
	nat	iface <iface>	disp	Display current NAT statistics
	ping		<hostid>[<size><time-interval>]	Ping remote host
	route	status		Display remote host
	route	add	<hostid>/[<bits>] <gw> [<metric>]	Add route to specific iface
	route	addprivate	<hostid>/[<bits>] <gw> [<metric>]	Add private route
	route	drop	<hostid/bits>	Drop a route
	status			Display ip statistic counters
	sua	disp		Display single user account statistic
	udp	status		Display udp statistic counters
	rip	status		Display rip statistic counters
	tftp	status		Display tftp statistic counters
	tcp	status		Display tcp statistic counters