\HELP\WIN2K_ME\WIN2K.TXT


                   FN300 series 10/100M PCI Network Adapter
                  ------------------------------------------
                Driver Installation for Microsoft Windows 2000
                ----------------------------------------------


  Getting Started
  ---------------
  The Windows 2000 installation CD is needed to complete this
  installation.

  The following example illustrates the installation of the adapter
  card.  
  It is recommended that you complete the Windows 2000 installation prior
  to inserting the adapter card into the system.

  Insllation procedure
  ---------------------
  1.  Turn off your computer and plug the adapter into an 
      available PCI slot in your computer.

  2.  Turn on the power of your computer to boot the system.

      The Win2000 system will find the hardware and start prompting you 
      for the proper device driver.
           
  3.  Press the right key of th mouse on "my computer",to select "Properties"
      At "System Properties" window, select "Hardware"->"Device Manger".
      In Device Manager, open "Network Adapter",it appers 
        " Realtek RTL8139(A)-base PCI Ethernet Adapter " 
        
  4.  Open the  FN300 series 10/100M PCI Network Adapter Properties
      Select Driver then Click "Update Driver"
      
  5.  Click "Next"
      Select the "Search for a suitable diver for my device (recommended)"
      and click "Next".          
      
  6.  Insert the Drivers disk into the floppy drive.
      Select only "Floppy disk drives" option and click "Next".
      Windows 2000 will indicate that a driver for the device has been
      found.  A floppy disk icon indicates that "a:\FN311.inf" is
      where it is able to locate the device driver.
  
  8.  Click "Next".
      A Digital Signature Not Found window pops up indicating that a    
      Microsoft digital signature does not exist.
      
  9.  Click "Yes" to continue with the installation,
      when "Digital Signature Not Found" window appear 
      Windows 2000 starts copying files into the system.
  
  10.  Click "Finish" to complete the installation.        
      
      Windows 2000 is ready to network afterwards.  It is not necessary
      to reboot the system to start networking.  You can now remove the 
      Driver disk.

  Additional Information
  ----------------------
  To futher customize the system, you can click My Network Places at
  the desktop. Examples of parameters that you can change are computer 
  and workgroup names, IP addresses, and additional network services.

    
