\HELP\WFW311\WFW311.TXT

                     FN300 series 10/100M PCI Network Adapter
                  ---------------------------------------------
         Driver Installation for Microsoft Windows for Workgroups 3.11
         -------------------------------------------------------------

  Installation Procedure
  ----------------------
  The following installation procedure uses the PCI adapter as an exmple.
  

  1.  In Program Manager, open "Network" -> "Network Setup" -> "Drivers".

  2.  In the "Network Drivers" window, select "Add Adapter".

  3.  When installing the LAN driver, Windows for Workgroups will present a
      list of all available drivers.  But the driver is
      not included in the system software.  Select "Unlisted or Updated 
      Network Adapter" for adapters not in the driver list.

  4.  Windows for Workgroups will ask for the drive/directory path con-
      taining the  driver.  Provide the path to the OEMSETUP.INF file
      in the \WFW311 directory.

        eg. A:\WFW311 when installing from the provided driver disk.

  5.  Click OK. then Show "FN300 series 10/100M PCI Network Adapter"
     
  6.  Select the "FN300 series 10/100M PCI Network Adapter". then Close.
    
      At this point, the driver has been properly copied and the
      installation would proceed to the next step.  Please refer to your
      Windows for Workgroups installation guide for the correct procedures.

      After the initial installation, the drivers will be
      permanently installed into the Windows for Workgroups system.
      Subsequent accesses to the network driver list will include these
      drivers as options.

  