\HELP\SCO\SCOOPEN.TXT

                     FN300 series 10/100M PCI Network Adapter
                  ---------------------------------------------
            MDI Driver Installation for SCO OpenServer version 5.0
            ------------------------------------------------------
    
  Installation Procedure
  ----------------------
  1. Login SCO OpenServer as root user. (On maintenance mode)

  2. Using "custom" to install the driver

     A. Prepare an image file

       Copy "FN311mdi" onto SCO OpenServer and rename it to "VOL.000.000"

            # mkdir /usr/test
            # mount -f DOS /dev/fd0 /mnt
            # cp /mnt/<PATH>/FN311mdi /usr/test/VOL.000.000

              <PATH> is the driver directory.

    B. Execute "custom"

       /* A menu selection screen will be popped up */
       Using [->] key to move cursor to "Software" menu item then
       press [] key to get into pull down menu then move to
       "Install New..." and press [ENTER] key


          ?Begin Installation on scosysv ?
          ?                                                  ?
          ? What host (machine) do you want to install from? ?
          ?                                                  ?
          ? Ŀ ?
          ? ?*> From scosysv                              ??
          ? ? > From another host                         ??
          ?  ?
          ?                                                  ?
          ?
          [ Continue ]        [ Cancel ]         [ Help]     ?
          ?

       Select From scoopen and use [TAB] key to move cursor to [Continue]
       then press [ENTER] key and press [] key to get into pull down menu

          ?Select Media ?
          ?                                                             ?
          ? Insert media, and select media device.                      ?
          ?                                                             ?
          ?              Ŀ ?
          ? Media Device:|Floppy Disk Driver 0_____________________|v??
          ?              ͻ ?
          ?               Ŀ                    ?
          ?               *Floppy Disk Driver 0                     ?
          ?                Media Images                             ?
          ĺٺĺ
          [ Continue ]    ͼ          [  Help  ]?
          ͼ


       -> Select "Media Images" and use [TAB] key to move cursor to
          [ Continue ] then press [ENTER] key then press [ENTER] key
          again

   Enter Image Directory ?
  ?                                                                     ?
  ?Enter the full path to the directory containing media images.        ?
  ?                                                                     ?
  ?Image Directory: |/usr/test________________________________________| ?
  ?                                                                     ?
  ?Note: media images must follow the naming convention VOL.000.000,etc.?
  ?                                                                     ?
  ?                                                                     ?
  ?                                                                     ?
  ĺ
  [   OK   ]                     [ Cancel ]                   [  Help  ]?
  ͼ

            -> Input the path name where VOL.000.000 is located as above
               path name is /usr/test


   Enter Image Directory ͻ
  ?                                                                      ?
  ?Installing: FN300 series 10/100M PCI Network Adapter                         ?
  ?                                                                      ?
  ?Install the selected software or patches.                             ?
  ?                                                                      ?
  ?
  [ Install ]     [ More Option ]      [ Cancel  ]     [  Help  ]        ?
  ?

        Using [TAB] key to move cursor to [ Install ] then press [ENTER] key

        After the installation process the following message is displayed,


                        Question ?
                       ?    Installation complete     ?
                       ?
                       ?           [ OK ]             ?
                       ?

        Press [Enter] key then you will find out that

            FN300 series 10/100M PCI Network Adapter        

        is added to the package list

        Using [<-] key to move cursor back to "Host" menu item then
        press [] key to get into pull down menu then move to "Exit"
        then press [ENTER] key

        Now that the driver is installed in the system successfully.


  5. Using "netconfig" to configure the driver

   /* A menu selection screen will be popped up */
   At "Hardware" menu item press [] key to get into pull down menu then
   move to "Add new LAN adapter" then press [ENTER] key

   If you got a PCI NIC inserted on your machine, it will list as following:


  Add new LAN adapter ͻ
 The following adapters have been found:                                  ?
 Ŀ?
 * Adapter Controller - PCI Bus                                         
                                                                        
                                                                        
                                                                        
                                                                        
 ?
 [ Configure hardware not listed above... ]                               ?
 ?
 [ Continue ]                     [  Cancel  ]                  [  Help  ]?
 ?

       Using [TAB] key to move to "Configure hardware not listed above..."
       then press [ENTER] key


   Add new LAN adapter ?
  Select network adapter to be added:                                     ?
  Ŀ
  *   3Com EtherLink 16/16TP Adapter                                    ^?
                     .                                                  *?
                     .                                                  *?
                     .                                                  *?
                     .                                                  *?
                                                                        *?
      FN300 series 10/100M PCI Network Adapter                                      *?
                     .                                                  
                     .                                                  
                     .                                                  
                     .                                                  v?
  ٺ
  ĺ
  [ Continue ]                   [  Cancel  ]                   [  Help  ]?
  ͼ

  Using [] key to move to "FN300 series 10/100M PCI Network Adapter" then    
  press  [ENTER] key.

    Network Driver Configuration ?
   ?                                                                    ?
   Enter the configuration of FN300 series 10/100M PCI Network Adapter:             ?
   ?                                                                    ?
   ?               Ŀ                       ?
   ?    PCI Bus#:  | 0_______________________|v?                      ?
   ?                                      ?
   ?               Ŀ                       ?
   ? PCI Device#:  | 0_______________________|v?                      ?
   ?                                      ?
   ?                                                                    ?
   ?                                                                    ?
   ??
   [   OK   ]                     [ Cancel ]                 [  Help  ] ?
   ?
                                

   The above screen let you fill the information of where your PCI adapter
   is located by specifying PCI Bus#, and PCI Device#.

   Note: If you are not sure about the PCI parameters or your PCI Device#
          can not be found in the list, leave them as default values.
          Continue with the following installation.  After the driver is
          installed and the system re-linked, reboot the system.  The driver
          will search for the PCI Adapter automatically.


   ?Information ?
   ?--  Please verify adapter is set to the configuration just entered?
   ?
   ?                             [ OK ]                               ?
   ?

   Press [ENTER] key.


   Add Protocol ͻ
  Select one networking product to be added to                            ?
  PFN300 series 10/100M PCI Network Adapter:                                   ?
  Ŀ
   HW FN300 series 10/100M PCI Network Adapter                                      
  *   - SCO IPX/SPX                                                     
      - SCO TCP/IP                                                      
                                                                        
                                                                        
  ٺ
  ĺ
  [  Add   ]                     [ Cancel ]                     [  Help  ]?
  ͼ

   Using [] key to move cursor to "SCO TCP/IP" then press [ENTER] key.

    SCO TCP/IP Configuration ?
   ?                                                        ?
   ?                                                        ?
   ?                                                        ?
   ?                                                        ?
   ? Local Host Name:  |scoopen_____________| [ Advanced   ]?
   ?      IP Address:  |192.9.200.1_________|   Options...  ?
   ?         Netmask:  |255.255.255.0_______|               ?
   Broadcast Address:  |192.9.200.255_______|               ?
   ?     Domain Name:  |scoopen.com_________|               ?
   ? TCP connections:  |256_________________|               ?
   ?     Pseudo ttys:  |32__________________|               ?
   ?                                                        ?
   ?                                                        ?
   ?
   ?                                                        ?
   ?[   OK   ]             [ Cancel ]            [  Help   ]?
   ?                                                        ?
   ?

  Input the required information then use [TAB] key to move cursor to "OK"
  then press [ENTER] key.

   Message ͻ
  ?                                                                        ?
  ?                                                                        ?
  ?The following products were successfully configured into the system     ?
  ?SCO TCP/IP                                                              ?
  ?PCI Adapter WOL for RTL8139D - PCI Bus#0,PCI Device#13,PCI              ?
  ?                                                                        ?
  ??
  [ OK ]                                                          [ Help ] ?
  ?

   Press [ENTER] key

   At "Hardware" menu item press [] key to get into pull down menu then
   move to "Exit" then press [ENTER] key

   Question ?
  ?    The Unix Kernel must be re-linked before the changes?
  ???  made here will have an effect.                      ?
  ?    Do you want to re-link the kernel now?              ?
  ?
  ?[  YES   ]                                      [ NO  ] ?
  ?

   Press [ENTER] key

   Do you want this kernel to boot by default (y/n)    y

   Do you want the kernel environment rebuilt (y/n)    y

 6. Reboot unix

   # init 0


  Another way to specify driver's PCI parameters  
  ----------------------------------------------
  Another way to modify PCI parameters is at booting
  time, shown as below:
  1. Specify PCI Bus#, PCI Device# and PCI Function#

       Boot
       : unix net.mdi=f3a(0) net.params=(pcb:0,pcd:14,pcf:0)

  2. Auto-search PCI adapter card

       Boot
       : unix net.mdi=f3a(0)


  Note:    The IRQ number must match with the value set in ROM-BIOS
           before you specify this value, please check it.
           The IRQ for PCI bus can be accessed by pressing [DEL] key when
           system is power on and choose the proper select item to set
           IRQ for PCI bus.

           Example: ROM PCI/ISA BIOS (2A4X5C31)
                    PCI/GREEN FUNCTION SETUP
                    AWARD SOFTWARE, INC.

           Press [DEL] key  -->  PCI/GREEN FUNCTION SETUP

                                 Slot 3 Using INT# : A-PIRQ1
                                           .
                                           .
                                           .
                                 PIRQ1# Connect IRQ: 5 By Single
                                                       ~


