\HELP\WIN2000\WIN2K.TXT


                   ZyXEL FN312 10/100 PCI Adapter
                  ------------------------------------------
                Driver Installation for Microsoft Windows 2000
                ----------------------------------------------


  Getting Started
  ---------------
  The Windows 2000 installation CD is needed to complete this
  installation.

  The following example illustrates the installation of the adapter
  card.  
  It is recommended that you complete the Windows 2000 installation
  prior to inserting the adapter card into the system.

  Insllation procedure
  ---------------------
  1.  Turn off your computer and plug the adapter into an 
      available PCI slot in your computer.

  2.  Turn on the power of your computer to boot the system.

      The Win2000 system will find the hardware "Ethernet Controller"
      and start prompting you for the proper device driver.
      Click on "Next" of the "Found new Hardware Wizard".
           
  3.  Select the "Search for a suitable driver for my device
      (recommended)", and then clikc on the "Next".
        
  4.  Select the "Specify a location", and click on "Next".
      
  5.  Insert the Drivers diskette into the floppy drive.
      Select the "Browse" to indicate the location to "A:\WIN2000",
      and click on "O.K.".
      
  6.  Windows will then found a driver for this device, and show you
      "To install the driver Windows found, click on Next.
                 a:\win2000\FN312.inf"
      Then. click on "Next" for sure. 
  
  7.  A Digital Signature Not Found window pops up indicating that a    
      Microsoft digital signature does not exist.
      
  8.  Click "Yes" to continue with the driver installation when
      "Digital Signature Not Found" window appear.
      Windows 2000 starts copying files into the system.
  
  9.  Click "Finish" to complete the installation.        
      
      Windows 2000 is ready to network afterwards.  It is not necessary
      to reboot the system to start networking.  You can now remove the 
      Driver disk.

  Additional Information
  ----------------------
  To futher customize the system, you can click My Network Places at
  the desktop. Examples of parameters that you can change are computer 
  and workgroup names, IP addresses, and additional network services.

    
