PCMCIA Ethernet/Fax/Modem                                          May 1996

		IBM Lan Support and Lan Services Installation

 Contents
 
	Introduction
	Getting Started
	Support Options        
	Copyrights, Trademarks, and Disclaimers

 Getting Started
 
	IBM Lan Support 2.x (see below for Lan Services 4.x)
	
	Please use Method 1 or 2 for this installation

        Method 1 -- Using the .NIF file: (Must use LM28IBM.NIF)
	Insert the LAN Support diskette in Drive A.
	Run the install program.

	     A:\> DXMAID [Enter]

	The following message then appears:

	     "Do you have driver diskettes?"  [Yes]

	Use the Spacebar to switch between "no" and "yes".

	After copying LAN Support, specify the drive and path of the
	 DOS NDIS files.

	     For example: A:\NDIS2 [Enter]

	The installation procedure terminates after copying the
	 necessary file.

	Method 2 -- Modifying the contents of the CONFIG.SYS and
	 PROTOCOL.INI files after installing other NICs:

        Copy the LMNDIS.DOS file to the directory where your IBM LAN
	 Support program resides.

	Modify the NDIS device driver statement in the CONFIG.SYS
	 as follows:

             DEVICE = [drive]:\path\LMNDIS.DOS

	Modify the PROTOCOL.INI file as follows:

             BINDINGS = LM28IBM_NIF
		       :
		       :
             [LM28IBM_NIF]
             DRIVERNAME = LMNDIS$

	IBM LAN Services v4.x
	
	Execute the installation program from the IBM DOS LAN SERVICES 
	 diskette

	     Type: >a:\install

	From the Network card field, select "Network card not shown in list
	 below...".

	Specify the path for the corresponding oemsetup.inf file of the OEM
	 driver intended for use.  Then, press Enter. The program then
	 displays the driver name.

	Check that the driver configuration is correct.

	Complete the installation, restart your system to use the DOS LAN
	 Services.

  Support Options
  
	We are consistently improving and upgrading our drivers. you are
	welcomed at any time to browse through our BBS, and download any
	drivers, utilities and help files.

        If you still cannot get the LanModem working properly, our
	technical experts are always ready to help.  Please be at your
        computer, have your LanModem, Drivers Disk, and the following
	information available:

	* Version number of CARDEN.EXE or any drivers you are
	  running
	* The extact text of any error message displayed on your screen
	* The type of computer
	* The type of network

  Copyrights, Trademarks, and Disclaimers
  
  All references to MS, Windows, Win95, Windows 95, Windows NT, WinNT are
  rights reserved by Microsoft Corporation
 
  All references to Nvl., ODI, Netware, NW, IPX, IPXODI, and LSL are rights
  reserved by Novell Corporation
 
  Further rights reserved to their respective corporations
 
