----- Original Message -----
Sent: Wednesday, May 15, 2002 12:43
PM
Subject: [openrisc] Parallel Cable
III
Hi,
here is a description of the JTAG Cable I found at
the xilinx web page
/Michael
Voxi
Xilinx Answer
Record # 3418: Cable - Is there a schematic for the Parallel Cable
III
(JTAG Cable)?
PROBLEM
DESCRIPTION:
--------------------
Keywords: JTAG, parallel,
schematic, cable, serial
Urgency: Standard
General
Description:
Where is a schematic of the parallel cable
III?
SOLUTION 1:
-----------
The version 2 schematic of the
JTAG/Parallel download cable is on the web
at:
http://www.xilinx.com/support/programr/files/0380507.pdf
The
additions to the schematic are the U1 & U2 components that are fed to
the
DONE pin.
For your parallel cable to work w/the schematic, make
sure your parallel cable
serial # is greater than 5000 (i.e. JT-00996 won't
work w/the current schematic
on the web)
----- End forwarded
message -----
http://support.xilinx.com
Xilinx
Answer Record # 3418: Cable - Is there a schematic for the Parallel Cable III
(JTAG Cable)?
Problem Description:
Keywords: JTAG, parallel, schematic, cable, serial
Urgency:
Standard
General Description:
Where is a schematic of the parallel
cable III?
Solution 1:
The version 2 schematic of the JTAG/Parallel download cable is on the web
at:
(http://www.xilinx.com/support/programr/files/0380507.pdf)
The additions to the schematic are the U1 & U2 components that are
fed to the DONE pin.
For your parallel cable to work w/the schematic,
make sure your parallel cable serial # is greater than 5000 (i.e. JT-00996
won't work w/the current schematic on the web)