head	1.1;
access;
symbols
	bg2_23:1.1
	bg2_22:1.1
	bg2_21:1.1
	bg2_20:1.1
	bg2_16:1.1
	bg2_15:1.1
	bg2_12:1.1
	bg2_07:1.1
	isorc2008_submission:1.1
	handbook_alpha_edition:1.1
	jtres2007_submission:1.1;
locks; strict;
comment	@# @;


1.1
date	2007.05.26.13.16.13;	author martin;	state Exp;
branches;
next	;
commitid	614b4658331c4567;


desc
@@


1.1
log
@move old docu
@
text
@--
--	pins for jop on bb board
--
--
--	general
--
	|clk :	INPUT_PIN = 55;
-- reset comes from max7032
	|reset :	INPUT_PIN = 124;
--
--	ram/flash
--
--	d1..d7 are fix
--
	|d0 :	BIDIR_PIN = 102;
	|d1 :	BIDIR_PIN = 109;
	|d2 :	BIDIR_PIN = 110;
	|d3 :	BIDIR_PIN = 111;
	|d4 :	BIDIR_PIN = 112;
	|d5 :	BIDIR_PIN = 113;
	|d6 :	BIDIR_PIN = 114;
	|d7 :	BIDIR_PIN = 116;
--
--	pinout for TSOP ram/flash 'above' acex
--
	|a0 :	OUTPUT_PIN = 101;
	|a1 :	OUTPUT_PIN = 100;
	|a2 :	OUTPUT_PIN = 99;
	|a3 :	OUTPUT_PIN = 98;
-- pin 16 to 1 of ram
	|a4 :	OUTPUT_PIN = 117;
	|a5 :	OUTPUT_PIN = 118;
	|a6 :	OUTPUT_PIN = 119;
	|a7 :	OUTPUT_PIN = 120;
	|a12 :	OUTPUT_PIN = 121;
	|a14 :	OUTPUT_PIN = 122;
	|a16 :	OUTPUT_PIN = 128;
	|a18 :	OUTPUT_PIN = 130;
	|a15 :	OUTPUT_PIN = 131;
	|a17 :	OUTPUT_PIN = 132;
	|nwr :	OUTPUT_PIN = 133;
	|a13 :	OUTPUT_PIN = 135;
	|a8 :	OUTPUT_PIN = 136;
	|a9 :	OUTPUT_PIN = 137;
	|a11 :	OUTPUT_PIN = 138;
-- pin 30 to 32 of ram
	|nram_cs :	OUTPUT_PIN = 140;
	|a10 :	OUTPUT_PIN = 7;
	|nrd :	OUTPUT_PIN = 8;
-- to max7032 pld
	|nrom_cs :	OUTPUT_PIN = 9;
-- to watch dog
	|wd :	OUTPUT_PIN = 10;
--
--	display
--
	|disp_rs :	OUTPUT_PIN = 97;
	|disp_nwr :	OUTPUT_PIN = 96;
	|disp_e :	OUTPUT_PIN = 95;
	|disp_d4 :	OUTPUT_PIN = 92;
	|disp_d5 :	OUTPUT_PIN = 91;
	|disp_d6 :	OUTPUT_PIN = 90;
	|disp_d7 :	OUTPUT_PIN = 89;
--
--	keyboard
--
	|key_in0 :	INPUT_PIN = 20;
	|key_in1 :	INPUT_PIN = 21;
	|key_in2 :	INPUT_PIN = 22;
	|key_in3 :	INPUT_PIN = 23;
	|key_out0 :	OUTPUT_PIN = 26;
	|key_out1 :	OUTPUT_PIN = 27;
	|key_out2 :	OUTPUT_PIN = 28;
	|key_out3 :	OUTPUT_PIN = 29;
--
--	triac out
--
	|p1_auf_ab :	OUTPUT_PIN = 30;
	|p2_auf :	OUTPUT_PIN = 31;
	|p3_auf :	OUTPUT_PIN = 32;
	|p2_ab :	OUTPUT_PIN = 33;
	|p3_ab :	OUTPUT_PIN = 36;
--
--	opto in
--
	|null_i :	INPUT_PIN = 37;
	|p1_i :	INPUT_PIN = 38;
	|p2_i :	INPUT_PIN = 39;
	|p3_i :	INPUT_PIN = 41;
	|p1_u :	INPUT_PIN = 42;
	|p2_u :	INPUT_PIN = 43;
	|p3_u :	INPUT_PIN = 44;
--
--	sensor input
--
	|sens_u :	INPUT_PIN = 67;
	|sens_o :	INPUT_PIN = 68;
	|sens_i :	INPUT_PIN = 69;
--
--	tast, leds
--
	|auf_t :	INPUT_PIN = 126;
	|ab_t :	INPUT_PIN = 125;
	|not_stop :	INPUT_PIN = 12;
	|tuer :	INPUT_PIN = 13;
	|led1 :	OUTPUT_PIN = 14;
	|led2 :	OUTPUT_PIN = 17;
	|led3 :	OUTPUT_PIN = 18;
	|led4 :	OUTPUT_PIN = 19;
--
--	main switch
--
	|u15kv_res :	OUTPUT_PIN = 60;
	|u15kv_set :	OUTPUT_PIN = 62;
	|loben_res :	OUTPUT_PIN = 63;
	|loben_set :	OUTPUT_PIN = 64;
	|schuetz :	OUTPUT_PIN = 65;
--
--	serial lines
--
--		use exp connector for now
--
	|txd :	OUTPUT_PIN = 46;
	|ncts :	INPUT_PIN = 47;
	|rxd :	INPUT_PIN = 48;
	|nrts :	OUTPUT_PIN = 49;

	|s1_txd :	OUTPUT_PIN = 51;
	|s1_ncts :	INPUT_PIN = 54;
	|s1_rxd :	INPUT_PIN = 56;
	|s1_nrts :	OUTPUT_PIN = 59;
--
--	expansion
--
	|iadc_sdi3 :	INPUT_PIN = 88;
	|iadc_sdo3 :	OUTPUT_PIN = 87;
	|iadc_sdi2 :	INPUT_PIN = 86;
	|iadc_sdo2 :	OUTPUT_PIN = 83;
	|iadc_sdi1 :	INPUT_PIN = 82;
	|iadc_sdo1 :	OUTPUT_PIN = 81;
	|exp6 :	OUTPUT_PIN = 80;
	|exp7 :	OUTPUT_PIN = 79;
	|exp8 :	OUTPUT_PIN = 78;
	|exp9 :	INPUT_PIN = 73;			-- really for temp adc sdi
	|exp10 :	OUTPUT_PIN = 72;	-- really for temp adc sdo
	|exp11 :	OUTPUT_PIN = 70;	-- really for temp adc gnd
***************************************************************
--
--	pins used for ehternet card
--
	|isa_d0 :	BIDIR_PIN = 88;		-- instead of exp
	|isa_d1 :	BIDIR_PIN = 87;
	|isa_d2 :	BIDIR_PIN = 86;
	|isa_d3 :	BIDIR_PIN = 83;
	|isa_d4 :	BIDIR_PIN = 82;
	|isa_d5 :	BIDIR_PIN = 81;
	|isa_d6 :	BIDIR_PIN = 80;
	|isa_d7 :	BIDIR_PIN = 79;
	|isa_reset :	OUTPUT_PIN = 78;

	|isa_a0 :	OUTPUT_PIN = 20;	-- instead of key_*
	|isa_a1 :	OUTPUT_PIN = 21;
	|isa_a2 :	OUTPUT_PIN = 22;
	|isa_a3 :	OUTPUT_PIN = 23;
	|isa_a4 :	OUTPUT_PIN = 26;
	|isa_nior :	OUTPUT_PIN = 27;
	|isa_niow :	OUTPUT_PIN = 28;
	|isa_nc :	OUTPUT_PIN = 29;
@