head     1.1;
branch   1.1.1;
access   ;
symbols  initial:1.1.1.1 diogenes:1.1.1;
locks    ; strict;
comment  @# @;


1.1
date     2008.01.16.19.01.36;  author fellnhofer;  state Exp;
branches 1.1.1.1;
next     ;
commitid        122547a751ef4567;

1.1.1.1
date     2008.01.16.19.01.36;  author fellnhofer;  state Exp;
branches ;
next     ;
commitid        122547a751ef4567;


desc
@@



1.1
log
@Initial revision
@
text
@##############################################################
#
# Xilinx Core Generator version J.36
# Date: Wed Nov 21 14:17:31 2007
#
##############################################################
#
#  This file contains the customisation parameters for a
#  Xilinx CORE Generator IP GUI. It is strongly recommended
#  that you do not manually alter this file as it may cause
#  unexpected and unsupported behavior.
#
##############################################################
#
# BEGIN Project Options
SET addpads = False
SET asysymbol = False
SET busformat = BusFormatAngleBracketNotRipped
SET createndf = False
SET designentry = VHDL
SET device = xc3s500e
SET devicefamily = spartan3e
SET flowvendor = Other
SET formalverification = False
SET foundationsym = False
SET implementationfiletype = Ngc
SET package = fg320
SET removerpms = False
SET simulationfiles = Behavioral
SET speedgrade = -5
SET verilogsim = False
SET vhdlsim = True
# END Project Options
# BEGIN Select
SELECT Single_Port_Block_Memory family Xilinx,_Inc. 6.2
# END Select
# BEGIN Parameters
CSET active_clock_edge=Rising_Edge_Triggered
CSET additional_output_pipe_stages=0
CSET component_name=dmem
CSET depth=1024
CSET disable_warning_messages=true
CSET enable_pin=false
CSET enable_pin_polarity=Active_High
CSET global_init_value=0
CSET handshaking_pins=false
CSET has_limit_data_pitch=false
CSET init_pin=false
CSET init_value=0
CSET initialization_pin_polarity=Active_High
CSET limit_data_pitch=18
CSET load_init_file=false
CSET port_configuration=Read_And_Write
CSET primitive_selection=Optimize_For_Area
CSET register_inputs=false
CSET select_primitive=16kx1
CSET width=32
CSET write_enable_polarity=Active_High
CSET write_mode=Read_After_Write
# END Parameters
GENERATE
# CRC: 7fa4fc1e

@


1.1.1.1
log
@
@
text
@@