Group = PolygonSeederAlgorithm

  # Seeds the polygon with Control Points by creating a grid, the centermost grid
  # is placed in the center of the polygon. Then, one Control Point is placed in the
  # center of each grid where there is overlap at that center of that grid square.
  # The following XSpacing/YSpacing parameters denote the dimensions of the grid.
  Name             = Grid

  # The minimum thickness required to seed the polygon with Control Points. A
  # thickness of 1.0 means that the polygon is a square. A thickness of 0.5
  # means that the polygon is a 2:1 rectangle.  A thickness of 0.25 means that
  # the polygon is a 4:1 rectangle, and so forth.
  # Any polygon with a thickness less than MinimumThickness will not be seeded.
  MinimumThickness = 0.3

  # The minimum area (in square meters) required to seed the polygon with
  # Control Points. Any polygon with an area less than MinimumArea will not be
  # seeded.
  MinimumArea      = 10

  # The spacing in meters between Control Points in the X direction. One
  # Control Point will be placed every XSpacing meters in the X direction.
  # This combined with the YSpacing, will create a grid of Control Points
  # across the polygon.
  XSpacing         = 1500

  # The spacing in meters between Control Points in the Y direction. One
  # Control Point will be placed every YSpacing meters in the Y direction.
  # This combined with the XSpacing, will create a grid of Control Points
  # across the polygon.
  YSpacing         = 1500

End_Group
