% NOTE -- ONLY EDIT THE .Rnw FILE!!!  The .tex file is
% likely to be overwritten.
%
%\VignetteIndexEntry{Visualizing Gates with Flow Cytometry Data}
%\VignetteDepends{flowViz}
%\VignetteKeywords{}
%\VignettePackage{flowViz}
\documentclass[11pt]{article}

\SweaveOpts{keep.source=TRUE,pdf=TRUE,eps=FALSE}


\newcommand{\scscst}{\scriptscriptstyle}
\newcommand{\scst}{\scriptstyle}
\newcommand{\Rfunction}[1]{{\texttt{#1}}}
\newcommand{\Rcode}[1]{{\texttt{#1}}}
\newcommand{\Robject}[1]{{\texttt{#1}}}
\newcommand{\Rpackage}[1]{{\textsf{#1}}}
\newcommand{\Rdata}[1]{{\textsf{#1}}}
\newcommand{\Rclass}[1]{{\textit{#1}}}



\title{Gates/filters in Flow Cytometry Data Visualization} 
\date{\today}



\usepackage[text={7.5in,9in},centering]{geometry}
\usepackage{Sweave}
\setkeys{Gin}{width=0.95\textwidth}
\usepackage[round]{natbib}

\usepackage{graphicx}
\usepackage{url}
\usepackage{hyperref}

% \usepackage{setspace}
% \setlength{\parindent}{0in}



\begin{document}
\maketitle

\begin{abstract}
  The \Rpackage{flowViz} package provides tools for visualization of
  flow cytometry data.  This document describes the support for
  visualizing gates (a.k.a. filters).
\end{abstract}


<<loadPackage, echo=false,results=hide>>=
library(flowViz)
@


\section{Introduction}
Tools to read in and otherwise manipulate flow cytometry data are
implemented in the \Rpackage{flowCore} package.  The
\Rpackage{flowViz} package provides visualization support for such
data.  In this document we give examples dealing with gated or
filtered data. Please consult the online documentation for more
details on the high-level visualization functions used here.




\subsection{Filters and filter results}
The \Rpackage{flowCore} package defines the concepts of
\Rclass{filters} and \Rclass{filterResults}.  Filters are abstract
entities defined in terms of markers that are measured on the flow
instrument as different channels, whereas a filter result is the
result of applying a filter to one or more \Rclass{flowFrames} (data
objects representing individual FCM experiments).  Some filters are
data driven, while some are not. We will later see how this
distinction has an impact on their plotting. All abstractions of
filters or gates inherit from class \Rclass{filter}, whereas objects
generated as the result of applying a filter inherit from class
\Rclass{filterResult}.


\subsection{Visualization}
Before we discuss how to visualize gates in \Rpackage{flowViz}, we need
to point out that this may only be reasonable for certain types of the
many possible plots, namely one-dimensional density plots and
two-dimensional scatter plots. Over time we might add gate-plotting
support for other plot types as well. There are two principal ways to
add gates to a flow cytometry plot; either we render the outlines of
the gate region (for both one and two-dimensional plots), or we
highlight the points within a gate region by distinctive color,
glyphs, or point size (this applies for two-dimensional plots
only). It only makes sense to visualize the boundaries of a filter if
it has a (one or two dimensional) geometric representation.  This is
true for rectangle, ellipsoid and polygon gates, which are all
frequently used.  It is also true for some data driven gates,
e.g. \Rclass{norm2Filter} gates, which have a (data dependent)
spherical representation.  Also, it makes sense to draw gate
boundaries only when plotting (some of) the channels that define the
gate.

Visualizing \Rclass{filterResults} is more general.  Specifically, the
result of applying a filter is usually a logical (\Rcode{TRUE} or
\Rcode{FALSE}) vector for each cell, or more generally, a
\Rclass{factor} (as long as we restrict ourselves to non-fuzzy
filters).  This can be used as a grouping variable within a display,
also when plotting channels other than those defining the gate.

All data-driven filters depend on the \Rclass{filterResult} to be
computed in order to plot them. The user doesn't have to worry about
this fact, as the software will implicitly compute these objects if
necessary. However, realizing filters and creating
\Rclass{filterResult} is often computationally intense and
time-consuming, and in many cases makes sense to explicitly create
the \Rclass{filterResult} once and pass it on to the plotting
functions instead of the input filter. In the course of this manual,
\Rclass{filter} objects and \Rclass{filterResults} may be used
interchangeably, unless stated otherwise.



\subsection{Example Data}
We use the \Rdata{GvHD} data set to provide some examples. It come as
a serialized \Rclass{flowSet} with the \Rpackage{flowViz} package and
the interested user is referred to its documentation for details. For
the purpose of this demonstration it is sufficient to know that the
\Robject{phenoData} slot of the \Robject{GvHD} set contains several
factor variables, \Robject{Patient} and \Robject{Visit} two of the
most descriptive ones. In general, all \Rclass{flowSets} contain an
implicit \Robject{name} variable which is is used as the default
conditioning variable in all of \Rpackage{flowViz's} high-level
plotting functions.
<<loadData>>=
library(flowViz)
data(GvHD)
head(pData(GvHD))
@ 
%
The set is quite large and reducing it to a reasonable subset will
speed up things for our interactive demonstration purpose. Due to
various constrains (data size, complexity of computations, limitations
in the \Rpackage{grid} software underlying the \Rpackage{lattice} and
\Rpackage{flowViz} packages), rendering plots is usually not
instantaneous. It usually takes a little bit of time to output
complex panel layouts. When producing postscript output, the user
should be aware that file size may become an issue, and we will
address solutions for this problem at the end of this document.

The \Rpackage{lattice} package offers inline subsetting capabilities
for all high level plotting functions though the \Robject{subset}
argument, and this functionality (like most of the other typical
\Rpackage{lattice} concepts) is also available for all derived
plotting methods in \Rpackage{flowCore}. The general idea here is that
all symbols defined in either the formula or one of the special
arguments like \Robject{subset} are evaluated in the context of the
\Rclass{flowFrame's} \Robject{phenoData} data frame or the raw data
matrix. This is a slight extension of the fundamental
\Rpackage{lattice} idea necessitated by the fact that raw data and
annotation data are stored separately in a \Rpackage{flowSet}.
<<subsetLattice, eval=FALSE>>=
xyplot(`SSC-H` ~ `FSC-H` | Visit, data=GvHD,
       subset=Patient=="6")
@ 
%
Inline subsetting is useful to change plots on the fly, or to play
around with various panel arrangements. However, we still pass the
whole \Robject{GvHD} object down to the plotting function, potentially
increasing memory usage and decreasing performance due to unnecessary
heavy copying operations. Since we only want to use the subset for
patient 6 in the following examples, it makes sense to directly subset
the \Rclass{flowSet}.
<<subsetFlowCore>>=
GvHD <- GvHD[pData(GvHD)$Patient==6]
@ 
%
We also want to transform some of the fluorescence channels to an
adequate log-like scale. A good choice is the \Rfunction{asinh}
function which can deal with negative values.
<<transform>>=
tf <- transformList(from=colnames(GvHD)[3:7], tfun=asinh)
GvHD <- tf %on% GvHD
@ 
%
For details on this step, please see the documentation of the
\Rfunction{transformList} and \Rfunction{\%on\%} functions in the
\Rpackage{flowCore} package.


\section{Filters in scatter plots}
Trellis scatter plots are created using \Rfunction{xyplot} methods.
The \Rfunction{xyplot} method for \Rclass{flowSet} objects supports
filters through the \Rcode{filter} argument. As mentioned before, its
value can either be an object inheriting from class \Rclass{filter} or
a \Rclass{filterResult} (a \Rclass{filterResultList} of multiple
\Rclass{filterResults} for \Rclass{flowSets}).

The key concepts here are that
\begin{itemize}
  
\item \Rclass{filters} and \Rclass{filterResults} can be used
  interchangeably. Providing \Rcode{filterResults} directly may
  increase performance for data-driven filters.
  
\item visualization of \Rclass{filters} depends on the type of
  rendering.  For example, with \Rcode{smooth=TRUE}, filters are
  visualized geometrically, which makes sense only under certain
  circumstances (e.g. display axes matching filter parameters, the
  \Rclass{filter} class has a geometric represention). For scatter
  plots of individual dots for all events (\Rcode{smooth=FALSE}),
  filters are visualized through grouping and/or geometric filter
  outlines; the former makes sense more generally, as display
  variables need not match filter parameters. Grouping has the
  drawback of overplotting.  The effect of overplotting can be reduced
  somewhat using transparency, but scalability issues remain.  We may
  try dealing with this at some point if it becomes enough of a
  hassle.
  
\item the software will check for matching parameters and available
  visualization representations as much as possible, yet finally it is
  up to the user to construct reasonable calls to the plotting
  functions.
\end{itemize}


\subsection{Simple Geometric Filter Types}
Visualization of most of the typical FCM filter types is straight
forward and doesn't require the computation of
\Rclass{filterResult}. All parameters (e.g. min and max values in a
recangular gate) are unambigously defined in the \Rclass{filter}
object. We will start with a simple \Rclass{rectangleGate} in the
\Robject{FSC-H} and \Robject{SSC-H} dimensions.
%
<<simpleRG, fig=TRUE, include=FALSE, echo=TRUE, prefix=FALSE, height=4.5, width=8>>= 
rgate <- rectangleGate("FSC-H"=c(0, 400),"SSC-H"=c(-50, 300))
print(xyplot(`SSC-H` ~ `FSC-H` | Visit, data=GvHD, filter=rgate))
@

\begin{figure}[htb]
  \centering
  \includegraphics{./simpleRG}
  \label{fig:simpleRG}
  \caption{A simple \Rclass{rectangleGate} visualization in the
    \Robject{FSC-H}-\Robject{SSC-H} xyplo.}
\end{figure}


As default for smoothed scatter plots, the gate boundaries are
drawn. Orientation of the gate will be handled by the plotting
function and the user doesn't have to worry about the order of
arguments when defining the \Rclass{filter}. The software also decides
on a reasonable two-dimensional geometric representation of more
complex filters. E.g., we can add a third dimension to the
\Rclass{rectangleGate} and still achive the same visualization in the
\Robject{FSC-H} and \Robject{SSC-H} dimensions.
<<threeDRG>>=
rgate2 <- rgate * rectangleGate("FL1-H"=c(2, 4))
xyplot(`SSC-H` ~ `FSC-H` | Visit, data=GvHD, filter=rgate2)
@ 
%
Most of the customization options defined in the \Rpackage{lattice}
package will also work here. A more detailed discussion about the
filter-specific graphical settings will follow in one of the later
sections.

For the non-smoothed rendering (i.e., all events are plotted as
individual points), the default filter visualization uses
different colors for the different subpopulations, as shown in
Figure~\ref{fig:.nonSmoothScatter}.
%
%
<<nonSmoothScatter>>=
xyplot(`SSC-H` ~ `FSC-H` | Visit, data=GvHD, filter=rgate, smooth=FALSE)
@
%
\begin{figure}[htb]
  \centering
<<plotnonSmoothScatter, fig=TRUE, include=FALSE, echo=FALSE, results=hide, prefix=FALSE, height=4.5, width=8>>=
print(plot(trellis.last.object()))
@
  \includegraphics{./plotnonSmoothScatter}
  \label{fig:nonSmoothScatter}
  \caption{Filter visualization in a non-smooth xyplot.}
\end{figure}
%
Additionally, We can add the \Rclass{filter} boundaries to the plot
using the \Robject{outline} argument.
%
<<nonSmoothScatterOutline>>=
xyplot(`SSC-H` ~ `FSC-H` | Visit, data=GvHD, filter=rgate,
smooth=FALSE, outline=TRUE)
@ 
%
%
\begin{figure}[htb]
  \centering
<<plotnonSmoothScatterOutline, fig=TRUE, include=FALSE, echo=FALSE, results=hide, prefix=FALSE, height=4.5, width=8>>=
print(plot(trellis.last.object()))
@
  \includegraphics{./plotnonSmoothScatterOutline}
  \label{fig:nonSmoothScatterOutline}
  \caption{Rectangle gate with outline in the  the
    \Rclass{FSC-H}-\Rclass{FL4-H} non-smooth xyplot.}
\end{figure}
%

The constraint for a valid two-dimensional representation doesn't
apply any more for this type of rendering. Since each event is
represented by a single point on the plot, we can visualize
arbitrarily complex \Rclass{filters} using different colors or point
glyphs for the different sub-populations.  However this implies that
we need to evaluate each filter, i.e., we need to figure out which of
the events are in and which are outside of the filter. We will see in
a minute how we can optimize these operations. Going back to our
three-dimensional rectangle, we notice that not all points within the
rectangle are also color red, because the additional third dimension
further reduced the selection of positive events in the
\Robject{FSC-H} and \Robject{SSC-H} dimensions. The result is shown in 
Figure~\ref{fig:nonSmoothScatter2}

<<nonSmoothScatterOutline2>>=
xyplot(`SSC-H` ~ `FSC-H` | Visit, data=GvHD, filter=rgate2,
       smooth=FALSE, outline=TRUE)
@ 
%
\begin{figure}[htb]
  \centering
<<plotnonSmoothScatter2, fig=TRUE, include=FALSE, echo=FALSE, results=hide, prefix=FALSE, height=4.5, width=8>>=
print(plot(trellis.last.object()))
@
\includegraphics{./plotnonSmoothScatter2}
  \label{fig:nonSmoothScatter2}
  \caption{Three-dimensional rectange gate with outline in the
    \Rclass{FSC-H}-\Rclass{FL4-H} non-smooth xyplot.} 
\end{figure}



Overplotting is a potential problem for this representation. As a
matter of fact, it is problematic for all visualization approaches of
high-volume FCM data that try to display individual events rather than
some form of summary statistic like density estimates. Partial
transparency can alliviate some of these shortcomings but this
approach does not scale well and has certain technical limitations on
graphic devices that don't support transparency. We will see in one of
the following sections how to enable partial transparency in scatter
plots.

\subsection{Data-Driven Filters}
Data-driven filters don't have a natural geometric representation a
priori; they are data-driven. Once all parameters are estimated, we
can usually derive such a representation from the
\Rclass{filterResult}. There is only a small subet of \Rclass{filter}
classes for which this is not directly possible
(\Rclass{kmeansFilter}, \Rclass{timeFilter}), although one might be
able to fall back to approximations like convex hulls or similar. So
far, \Rpackage{flowViz} has nor support for plotting gate outlines of
these filter types, and they are silently ignored when passed on as
argument \Robject{filter} to any of the high-level plotting
functions. As shown in the previous example, the absence of a
two-dimensional spherical representation only poses a problem when
trying to plot filter boundaries, the non-smooth representation of
individual events is available for virtually all \Rclass{filter}
types.

In the following example, we first compute the \Rclass{filterResults}
of a \Rclass{norm2Filter} in \Robject{FSC-H} and \Robject{SSC-H} for
each frame in our \Robject{GvHD} \Rclass{flowSet} and plot their
geometric elliptic representation.


<<norm2Filter>>=
n2Filter <- norm2Filter("SSC-H", "FSC-H", scale=2, filterId="Lymphocytes")
n2Filter.results <- filter(GvHD, n2Filter)
xyplot(`SSC-H` ~ `FSC-H` | Visit, data=GvHD, filter=n2Filter.results)
@ 
%
\begin{figure}[htb]
  \centering
<<plotnorm2Filter, fig=TRUE, include=FALSE, echo=FALSE, results=hide, prefix=FALSE, height=4.5, width=8>>=
print(plot(trellis.last.object()))
@
  \includegraphics{./plotnorm2Filter}
  \label{fig:norm2Filter}
  \caption{Gate defined by \Robject{norm2Filter} in the \Rclass{FSC-H} and
    \Rclass{FL4-H} channels.}
\end{figure}


There are data-driven filter types that may result in more than just
one sub-population. \Rclass{curv1Filters} and \Rclass{curv2Filters}
are a prominent example. In the next code chunk we use a
\Rclass{curv2Filter} to identify high-density areas in the
\Robject{FSC-H} and \Robject{FL4-H} projections of the data.


<<curv2Filter>>=
c2f <- curv2Filter("FSC-H", "FL4-H", bwFac=1.8)
c2f.results <- filter(GvHD, c2f)
xyplot(`FL4-H` ~ `FSC-H` | Visit, data=GvHD, filter=c2f.results)
@ 
%
\begin{figure}[htb]
  \centering
<<plotcurv2Filter, fig=TRUE, include=FALSE, echo=FALSE, results=hide, prefix=FALSE, height=4.5, width=8>>=
print(plot(trellis.last.object()))
@
  \includegraphics{./plotcurv2Filter}
  \label{fig:norm2Filter}
  \caption{High density areas identified by \Robject{curv2Filter} in the
    \Rclass{FSC-H} and \Rclass{FL4-H} dimensions.}
\end{figure}



This is a good example for a case where passing the
\Rclass{filterResult} instead of the \Rclass{filter} helps to optimize
computation time. Depending on the hardware it can take quite a while
to complete the extensive computations necessary for the
identification of siginficant high-density areas in two
dimensions. Imagine you want to make slight changes to your plot (and
producing good graphical output is almost always an iterative
approach); having to recompute the \Rpackage{filterResult} on each
iteration would be very time-cosuming and annoying at best.

\section{Filters in one-dimensional density plots}
The \Rpackage{lattice} package provides the high-level
\Rfunction{densityplot} function to draw one-dimensional Kernel
density estimates of univariate data. Density estimates are a
generalization of the well-known histograms; instead of drawing boxes
of relative or absolute frequencies of binned observations, a
continous relative density is displayed, usually beautified by
applying a smoother function with an appropriate bandwidth. The
\Rfunction{densityplot} methods in the \Rpackage{flowViz} package
assume an implicit conditioning variable (the measurement channel or
channels) and display the density estimates of all frames for one
channel as a stacked layout. This has proven to be a useful
visualization, since the direct comparison of univariate channel
distributions is of great interest in many FCM application, however the
typically large number of samples makes superimposing in a single
display impratical. See the documention of \Rfunction{densityplot} for
more details.

In one-dimensional density plots it only makes sense to plot filter
boundaries. The densities are basically a summary of the distribution
of events for a particular channel, and there is no real notion of
individual events any more. Similar to the \Rfunction{xyplot} methods,
we can pass \Rclass{filters} or \Rclass{filterResults} to the function
as optional argument \Robject{filter}. We decided to indicate gate
boundaries by different shading of the the respective integrals of the
density regions rather than simply adding vertical lines. These tend
to be distracting in the stacked layout or are often partly masked by
overplotting of neighbouring density areas.

<<densityplots>>=
densityplot(~ `FSC-H`, GvHD, filter=curv1Filter("FSC-H"))
@ 
%
\begin{figure}[htb]
  \centering
<<plotdensityplots, fig=TRUE, include=FALSE, echo=FALSE, results=hide, prefix=FALSE, height=4.5, width=8>>=
print(plot(trellis.last.object()))
@
  \includegraphics{plotdensityplots}
  \label{fig:densityplots}
  \caption{High density areas identified by \Rclass{curv1Filter}.}
\end{figure}

The situation gets slightly more complex when we are conditioning on
multiple FCM channels. In this case, filter has to be a list of equal
length as the number of channels that are supposed to be displayed
(i.e., the number of panels). Each list item may contain one of the
familiar objects of class \Rclass{filter}, \Rclass{filterResult},
\Rclass{filterResultList}, or \Robject{NULL} in case no filter should
be plotted at all for a given panel.




<<multDensityplots>>=
densityplot(~ ., GvHD, channels=c("FSC-H", "SSC-H", "FL1-H"), 
filter=list(curv1Filter("FSC-H"), NULL, rgate2))
@ 
%

\begin{figure}[htb]
  \centering
<<plotmultDensityplots, fig=TRUE, include=FALSE, echo=FALSE, results=hide, prefix=FALSE, height=4, width=8>>=
print(plot(trellis.last.object()))
@
    \includegraphics{plotmultDensityplots}
  \label{fig:multDensityplots}
  \caption{Multiple densityplots with combination of \Rclass{rectangleGate} and
    \Rclass{curv2Filter}.}
\end{figure}


Note that by default the scale of the x axis has been adjusted for
each panel. This is contrary to the default settings in the
\Rpackage{lattice} package and can be reversed using appropriate
settings in in the \Robject{scales} argument.

\section{Plotting parameters}
\Rpackage{Lattice} graphics are a great tool to easily create
informative and consise data visualization with a minimal amount of
code. Most of its default graphical parameters are well thought
through. However, there is also a wealth of customization available,
and we refer readers to the package's documentation as well as
%% Deepayan Sarkar's excellent book 
\citet{Sarkar} for details. With
respect to \Rpackage{flowViz}, it should suffice to mention that
customization follows the exact same principles defined in the
\Rpackage{lattice} package. As a matter of fact, most customization
actually happens at the level of the underlying \Rpackage{lattice}
software. The facts to mention are:

\begin{itemize}
\item There are session-wide global defaults that can be queried and
  set using the \Rfunction{flowViz.par.get} and
  \Rfunction{flowViz.par.set} functions. These are extensions to the
  \Rfunction{trellis.par.get} and \Rfunction{trellis.par.set}
  functions in the \Rpackage{lattice} package, and work in exactly the
  same way. All graphical parameters that are not defined in
  \Rpackage{flowViz} are directly passed on to \Rpackage{lattice}.
  
\item Parameters can also be set for a single function call using the
  \Robject{par.settings} argument. These setting take precedence over
  global settings.
  
\item Parameters are split up into logical categories and have to be
  provided as named lists or lists of lists. The categories directly
  relevant for filter plotting are \Robject{gate},
  \Robject{gate.density}, and \Robject{gate.text}, the basic
  \Rpackage{flowViz} settings are controlled by the
  \Robject{flow.symbol} category. See the documentation for
  \Rfunction{flowViz.par.set} for a complete list of available
  parameters. All additional graphical parameters (like \Robject{cex},
  \Robject{pch} and \Robject{col}) known from the \Rpackage{lattice}
  high-level plotting functions are also still available.
  
\end{itemize}

<<Pars1>>=
xyplot(`SSC-H` ~ `FSC-H` | Visit, data=GvHD, filter=rgate,
       par.settings=list(gate=list(fill="black", alpha=0.2)))
@ 
%
\begin{figure}[htb]
  \centering
<<plotPars1, fig=TRUE, include=FALSE, echo=FALSE, results=hide, prefix=FALSE, height=4.5, width=8>>=
print(plot(trellis.last.object()))
@
  \includegraphics{./plotPars1}
  \label{fig:Pars1}
  \caption{Transparent rectangate gate (\Rclass{rectangleGate}) in the 
     \Robject{FSC-H}-\Robject{FL4-H} xyplot as using the \Robject{per.ettings}
     argument.} 
\end{figure}


We could have achieved the same customization by changing the session defaults:
<<plotPars2, eval=FALSE>>=
flowViz.par.set(gate=list(fill="black", alpha=0.2))
xyplot(`SSC-H` ~ `FSC-H` | Visit, data=GvHD, filter=rgate)
@
%
Depending on the rendering, the graphical parameters may have slightly
different effects. The \Robject{col} parameters for instance sets the
line color for filter boundaries and the point color for non-smooth
scatter plots (and also the outline if \Robject{outline=TRUE}). In the
following code sample we try to make use of partial transparency to
address the problem of overplotting. Dense regions of the plot with
many overplotted points will apprear darker. Although this is better
than using opaque colors, lots of the underlying structure could still
be hidden and we strongly emphasize the advantages of smoothed scatter
plots for vizualization of FCM data.


<<Pars3>>=
xyplot(`SSC-H` ~ `FSC-H` | Visit, data=GvHD, filter=rgate,
       smooth=FALSE, 
       par.settings=list(gate=list(col="orange", alpha=0.04,
                                   pch=20, cex=0.7),
                         flow.symbol=list(alpha=0.04, pch=20, cex=0.7)))
@ 
%
\begin{figure}[htb]
  \centering
<<plotPars3, fig=TRUE, include=FALSE, echo=FALSE, results=hide, prefix=FALSE, height=4.2, width=8>>=
print(plot(trellis.last.object()))
@
  \includegraphics{./plotPars3}
  \label{fig:Pars3}
  \caption{Rectangate gate
    (\Rclass{rectangleGate}) in the  \Robject{FSC-H}-\Robject{FL4-H}
    non-smooth xyplot as using the \Robject{per.ettings} argument. }
\end{figure}




For multiple population filters, R ordinary recycling rules apply, and
we can spice up out plot of the \Rclass{curv2Filter} results by using
a different color for each sub-population.


<<Pars4>>=
xyplot(`FL4-H` ~ `FSC-H` | Visit, data=GvHD, filter=c2f.results,
par.settings=list(gate=list(fill=rainbow(10), alpha=0.5, col="transparent")))
@ 
%
\begin{figure}[htb]
  \centering
<<plotPars4, fig=TRUE, include=FALSE, echo=FALSE, results=hide, prefix=FALSE, height=4.5, width=8>>=
print(plot(trellis.last.object()))
@
  \includegraphics{./plotPars4}
  \label{fig:Pars4}
  \caption{High density areas in the \Robject{FSC-H}-\Robject{FL4-H}
    xyplot using lists of graphical paremeters.} 
\end{figure}





Sometimes it helps to add population names to a
plot. \Rpackage{flowCore} provides default names for each
\Rclass{filter} and their associated results, but the user is free to
pass their own custom names. The interface is very simple: argument
\Robject{names} either takes a logical scalar (default names are used
if \Robject{TRUE}) or a character vector. Again, recycing rules apply
when there are multiple sub-populations (unless default names are uses
in which case the software provides a reasonable choice).

<<norm2FilterNames>>=
xyplot(`SSC-H` ~ `FSC-H` | Visit, data=GvHD, filter=n2Filter.results, 
       names=TRUE, 
       par.settings=list(gate=list(fill="black", alpha=0.2, 
                                   col="transparent"),
                         gate.text=list(col="darkred", alpha=0.7, cex=0.6)))
@ 
%
\begin{figure}[htb]
  \centering
<<plotnorm2FilterNames, fig=TRUE, include=FALSE, echo=FALSE, results=hide, prefix=FALSE, height=4.5, width=8>>=
print(plot(trellis.last.object()))
@
  \includegraphics{plotnorm2FilterNames}
  \label{fig:norm2FilterNames}
  \caption{Displaying population names.}
\end{figure}





\section{Restrictions on the formula interface}
We mentioned before that all elements of the formulae used in
\Rpackage{flowViz} are evaluated in the context of either the raw data
matrix or the \Robject{phenoData} slot. This implies that formula
components can themselves be valid R expressions including function
calls. To a certain extend this is true, and the user might be able to
produce reasonable graphical output by evaluating expressions on
existing data or annotation objects, however we strongly discourage
this use. The software makes certain assumptions on the relationship
between gate definitions and data, the most prominent one being that
both are on the same scale. The use of expressions in
\Rpackage{flowViz} potentially changes the scale of the raw data, in
which case the gate representation doesn't make much sense
anymore. Furthermore, FCM data is naturally censored (by the available
measurement range of the instrument) and we try to protect the user
from irritating visual artifacts caused by the piling up of events on
the margins of the data range. This is most notable in the
one-dimensional densityplots, where densities are only computed within
the data range, and margin events are added as vertical
bars. Similarily, in the two-dimensional smoothed scatter plots, we
display margin events as ticks around the actual data display. Again,
changing the scale of the data would potentially invalidate many of
the necessary computations.

In summary, \Rpackage{lattice} encourages the use of expressions in the formula
interface and for the sake of customizability we didn't want to
exclude this feature completely in the \Rpackage{flowViz} methods.
However, the tool has to be used with great care, particularly when
plotting gates.



\section{Filters in parallel coodinate plots}
Although the \Rcode{filter} argument does not make much sense except
in scatter plots, \Rcode{filterResults} can be used for grouping in
other contexts.  So far, only the \Rfunction{parallel} method supports
this syntax.

<<parCoord>>=
parallel(~ . | Visit, GvHD, filter=n2Filter.results, alpha = 0.01)
@ 

\begin{figure}[htb]
  \centering
<<plotparCoord, fig=TRUE, include=FALSE, echo=FALSE, results=hide, prefix=FALSE, height=6, width=8>>=
print(plot(trellis.last.object()))
@
  \includegraphics{./plotparCoord}
  \label{fig:parCoord}
  \caption{Parallel coordinates plot all channels excluding time.}
\end{figure}




\clearpage

\bibliographystyle{plainnat} 
\bibliography{cytoref}

\end{document}
