%
% NOTE -- ONLY EDIT graph.Rnw!!!
% graph.tex file will get overwritten.
%
%\VignetteIndexEntry{Graph}
%\VignetteDepends{graph}
%\VignetteKeywords{Graph}
%\VignettePackage{graph}
\documentclass{article}

\usepackage{hyperref}

\textwidth=6.2in
\textheight=8.5in
%\parskip=.3cm
\oddsidemargin=.1in
\evensidemargin=.1in
\headheight=-.3in


\newcommand{\Rfunction}[1]{{\texttt{#1}}}
\newcommand{\Rmethod}[1]{{\texttt{#1}}}

\newcommand{\Robject}[1]{{\texttt{#1}}}
\newcommand{\Rpackage}[1]{{\textit{#1}}}
\newcommand{\Rclass}[1]{{\textit{#1}}}


\newcommand{\classdef}[1]{%
  {\em #1}
}

\begin{document}
\title{How To use the graph package}

\maketitle

\section{Introduction}

The \Rpackage{graph} package provides an implementation of graphs
(the kind with nodes and edges) in R. Software infrastructure is
provided by three different, but related packages,
\begin{description}
\item[graph] Provides the basic class definitions and functionality.
\item[RBGL] Provides an interface to graph algorithms (such as
shortest path, connectivity etc).
\item[Rgraphviz] Provides rendering functionality. Different layout
algorithms are provided and node plotting, line type, color etc
parameters can be controlled by the user.
\end{description}

A short description of the R classes and methods is given at the end
of this document. But here, we begin by creating some graphs and
performing different operations on those graphs.

The reader will benefit greatly from also have the
\Rpackage{Rgraphviz} package available and from using it to render the
different graphs as they proceed through these notes.


\section{Getting Started}

We will first create a graph and then spend some time examining some
of the different functions that can be applied to the graph.
We will create a random graph as the basis for our explorations (but
will delay explaining the creation of this graph until
Section~\ref{sec:rg}).

First we attach the \Rpackage{graph} package and create a random graph
(this is based on the Erdos-Renyi model for random graphs).

<<g1>>=
library(graph)
set.seed(123)
g1 = randomEGraph(LETTERS[1:15], edges=100)
g1
@

We can next list the nodes in our graph, or ask for the degree (since
this is an undirected graph we do not distinguish between in-degree
and out-degree). For any node in \Robject{g1} we can find out which
nodes are adjacent to it using the \Rfunction{adj} function. Or we can find
out which nodes are accessible from it using the \Rfunction{acc} function.
Both functions are \textit{vectorized}, that is, the user can supply a
vector of node names, and each returns a named list. The names of the
list elements correspond to the names of the nodes that were supplied.
For \Rfunction{acc} the elements of the list are named vectors, the names
correspond to the nodes that can be reached and the values correspond
to their distance from the starting node.


<<simplefuns>>=
nodes(g1)
degree(g1)
adj(g1, "A")
acc(g1, c("E", "G"))
@


One can obtain subgraphs of a given graph by specifying the set of
nodes that they are interested in. A subgraph is actually a copy of
the relevant part of the original graph. A subgraph is the set of
specified nodes plus any edges between them. We can also compute the
boundary of a subgraph. The boundary is the set of all nodes in the
original graph that have an edge to the specified subgraph. The
\Rfunction{boundary} returns a named list with one component for each
node in the subgraph. The elements of this list are vectors which
contain all nodes in the original graph that have an edge to that
element of the subgraph.

We also demonstrate two edge related functions in the code chunk
below. One retrieves all edges from a graph and is called
\Rfunction{edges} while the other retrieves the edge weights and is
called \Rfunction{edgeWeights}.

<<subG>>=

 sg1 = subGraph(c("A", "E", "F","L"), g1)
 boundary(sg1, g1)

 edges(sg1)
 edgeWeights(sg1)

@

\subsection{Some Algebraic Manipulations}

The examples here originally came from Chris Volinsky at AT\&T, but
have been modified in places as the \Rpackage{graph} package has evolved.
In the code chunk below we demonstrate how to create a graph
\textit{from scratch}. In this code chunk two graphs are created,
\Robject{gR} and \Robject{gR2}, the first is undirected while the
second is a directed graph.

<<example1>>=
V <- LETTERS[1:4]
edL1 <- vector("list", length=4)
names(edL1) <- V
for(i in 1:4)
  edL1[[i]] <- list(edges=c(2,1,4,3)[i], weights=sqrt(i))
gR <- new("graphNEL", nodes=V, edgeL=edL1)

edL2 <- vector("list", length=4)
names(edL2) <- V
for(i in 1:4)
  edL2[[i]] <- list(edges=c(2,1,2,1)[i], weights=sqrt(i))
gR2 <- new("graphNEL", nodes=V, edgeL=edL2, edgemode="directed")

@

New graphs can be constructed from these graphs in many different
ways but in all cases the existing graph itself is not altered, but
rather a copy is made and the changes are carried out on that copy.
Nodes and or edges can be added to the graphs using the functions
\Rfunction{addNode}, \Rfunction{addEdge}, \Rfunction{removeNode} and
\Rfunction{removeEdge}. All functions will take a vector of nodes or
edges and add or remove all of them at one time. One other function in
this family is \Rfunction{combineNodes}, this function takes a vector
of nodes and a graph and combines those nodes into a single new node
(the name of which must be supplied). The function
\Rfunction{clearNode} removes all edges to the specified nodes.

<<addNodes>>=

gX = addNode(c("E", "F"), gR)
gX
gX2 = addEdge(c("E", "F", "F"), c("A", "D", "E"), gX, c(1,2,3))
gX2

gR3 = combineNodes(c("A","B"), gR, "W")
gR3

clearNode("A", gX)

@

When working with directed graphs it is sometimes of interest to find
the \textit{underlying} graph. This is the graph with all edge
orientation removed. The function \Rfunction{ugraph} provides this
functionality.
<<combine>>=

##find the underlying graph
ugraph(gR2)

@

Other operations that can be carried out on graphs, that are of some
interest, are unions, intersections and complements. We have take a
rather specialized definition of these operations and it is not one
that is widely used, but it is very useful for the bioinformatics and
computational biology projects that we are working on.

For two or more graphs all with \textbf{the same nodes} we define:
\begin{description}
\item[union] to be the graph with the same set of nodes as the inputs
and edges between any two nodes that were connected in any one graph.
\item[intersection] to be the graph with the same set of nodes as the
inputs and with edges between two nodes if there was an edge in all graphs.
\item[complement] to be the graph with the same set of nodes as its
input and edges in the complement if there were none in the original graph.
\end{description}

In the code chunk below we generate a random graph and then
demonstrate the concepts of union, intersection and complement.

<<unions>>=
set.seed(123)
gR3 <- randomGraph(LETTERS[1:4], M<-1:2, p=.5)

 x1 <-  intersection(gR,gR3)
 x1

 x2 <-  union(gR,gR3)
 x2

 x3 <- complement(gR)

 x3

@

Notice that while the graphs \Robject{gR} and \Robject{gR2} have
different sets of edge weights these are lost when the
\Rmethod{union}, \Rmethod{intersection} and \Rmethod{complement} are taken.
It is not clear how they should be treated and in the current
implementation they are ignored and replaced by weight 1 in the
output.

\section{Random Graphs}
\label{sec:rg}
Three basic strategies for finding random graphs have been implemented:
\begin{description}
\item[randomEGraph] A random edge graph. In this graph edges are
randomly generated according to a specified probability, or the number
of edges can be specified and they are randomly assigned.
\item[randomGraph] For this graph the number of nodes is specified as
well as some latent factor. The user provides both the node labels and
a factor with some fixed number of levels. Each node is randomly
assigned levels of the factor and then edges are created between nodes
that share the same levels of the factor.
\item[randomNodeGraph] A random graph with a pre-specified node
distribution is generated.
\end{description}

The function \Rfunction{randomEGraph} will generate graphs using the
random edge model. In the code chunk below we generate a graph,
\Robject{g1} on 12
nodes (with labels from the first 12 letters of the alphabet) and
specify that the probability of each edge existing is $0.1$.
The graph \Robject{g2} is on the same set of nodes but we specify that
it will contain 20 edges.

<<randomEGraph>>=
set.seed(333)
V = letters[1:12]
g1 = randomEGraph(V, .1)
g1
g2 = randomEGraph(V, edges=20)
g2

@

The function \Rfunction{randomGraph} generates graphs according to the
latent variable model. In the code chunk bel
<<randomGraph>>=
set.seed(23)
V <- LETTERS[1:20]
M <- 1:4
g1 <- randomGraph(V, M, .2)
@

Our last example involves the generating random graphs with a
prespecified node degree distribution. In the example below we require
a node degree distribution of 1, 1, 2 and 4. We note that self-loops
are allowed (and if someone wants to provide the code to eliminate
them, we would be glad to have it).


<<randomNodeGraph>>=
    set.seed(123)
     c1 <- c(1,1,2,4)
     names(c1) <- letters[1:4]

     g1 <- randomNodeGraph(c1)



@


\section{Some Graph Algorithms}

In addition to the simple algebraic operations that we have
demonstrated in the preceeding sections of this document we also have
available implementations of some more sophisticated graph
algorithms. If possible though, one should use the algorithms provided
in the \Rpackage{RBGL}.

The function \Rfunction{connComp} returns a list of the connected
components of the given graph.  For a \textit{directed graph} or
\textit{digraph} the underlying graph is the graph that results from
removing all direction from the edges. This can be achieved using the
function \Rfunction{ugraph}. A weakly connected component of a digraph
is one that is a connected component of the underlying graph and this
is the default behavior of \Rfunction{connComp}.

<<rGraph>>=
 g1

 g1cc <- connComp(g1)
 g1cc

 g1.sub <- subGraph(g1cc[[2]], g1)
 g1.sub

@

Another useful set of graph algorithms are the so-called searching
algorithm. For the \Rpackage{graph} package we have implemented the
depth first searching algorithm as described in Algorithm 4.2.1 of
\cite{GrossYellen}. More efficient and comprehensive algorithms are
available through the \Rpackage{RBGL} package. The returned value is a
named vector. The names correspond to the nodes of the graph and the
values correspond to the distance (often the number of steps) or sum
of the edgeweights along the path to that node.

<<dfs>>=
DFS(gX2, "E")

@

\section{Special Types of Graphs}

We have found it useful to define a few special types or classes of
graphs for some bioinformatic problems but they likely have broader
applicability. All of the functions described above should have
methods for these special types of graphs (although we may not yet
have implemented all of them, please let the maintainer know if you
detect any omissions).

First is the \Robject{clusterGraph}. A cluster graph is a graph where
the nodes are separated into groups or clusters. Within a cluster all
nodes are connected (a complete graph) but between clusters there are
no edges. Such graphs are useful representations of the output of
clustering algorithms.

<<clusterGraph>>=

cG1 <- new("clusterGraph", clusters=list(a=c(1,2,3), b=c(4,5,6)))
cG1
acc(cG1, c("1", "2"))

@

The other special type of graph that we have implemented is based on
distances. This graph is completely connected but the edge weights
come from inter-node distances (perhaps computed from an expression
experiment).

<<distanceGraph>>=
set.seed(123)
x <- rnorm(26)
names(x) <- letters
library(stats)
d1 <- dist(x)
g1 <- new("distGraph", Dist=d1)
g1

@


\section{Coercion}

There are very many different ways to represent graphs. The one chosen
for our basic implementation is a node and edge-list
representation. However, many others use an adjacency matrix
representation. We provide a number of different tools that should
help users coerce graphs between the different representations.

Coercion from an adjacency matrix to a \Rclass{graphNEL} object
requires a numeric matrix with both row and column names. These are
taken to define the nodes of the graph and the edge weights in the
resultant graph are determined by the values in the array (weights
zero are taken to indicate the absence of an edge).

The function \Rfunction{ftM2adjM} converts a \textit{from-to} matrix
into an adjacency matrix. Conversion to a \Rclass{graphNEL} graph can
be carried out using the \Rfunction{as} method for that class.

An \texttt{aM} is an affiliation matrix which is frequently used in social
networks analysis.  The rows of \texttt{aM} represent actors, and the
columns represent events.  A one, \texttt{1}, in the ith row and jth
column represents the affiliation of the ith actor with the jth event.
The function \Rfunction{aM2bpG} coerces a \texttt{aM} into an instance
of the \Rclass{graphNEL} where the nodes are both the actors and the
events (there is currently no bipartite graph representation, although
one could be added).

The two functions \Rfunction{sparseM2Graph} and
\Rfunction{graph2SparseM} provide coercion between \Rclass{graphNEL}
instances and sparse matrix representations. Currently we rely on the
\Rpackage{SparseM} of Koncker and Ng for the sparse matrix
implementation.


@
\subsection{Classes}

We briefly review some of the class structure here and refer the
reader to the technical documentation for this package for more details.


The basic class, \Rclass{graph}, is a virtual class and all other
classes will extend this class. There are three main implementations
available. Which is best will depend on the particular data set and
what the user wants to do with it. The only slot defined in the
virtual class is \Robject{edgemode} which can be either
\textit{directed} or \textit{undirected} indicating whether the edges
are directed or not.

The class \Rclass{graphNEL} is a node and edge-list representation of
a graph. That is the graph is comprised of two components a list of
nodes and a list of the out edges for each node.

The class \Rclass{graphAM} is an adjacency matrix implementation. It
will be developed next and will use the \Rpackage{SparseM} package if
it is available.

The class \Rclass{clusterGraph} is a special form of graph for
clustering. In this graph each cluster is a completely connected
component (a clique) and there are no between cluster edges.

\end{document}

