! /usr/lib/X11/xmodmap.std - Modified on 15.5.97 by ggiambon@g26.ethz.ch
! Use this modmap only with the supplied swiss keymap.
! I´m not a Linux-Expert, I´m not sure the swiss keymap file and
! this xmodmap will work correctly under Linux and/or X.
!                   USE IT AT YOUR OWN RISK !
!
! $XFree86: xc/programs/Xserver/hw/xfree86/etc/xmodmap.std,v 3.4 1996/02/04 09:09:12 dawes Exp $
!
! Standard key mapping for XFree86 (for US keyboards).
!
! This file can be fed to xmodmap to restore the default mapping.
!
! $XConsortium: xmodmap.std /main/6 1995/11/12 20:18:01 kaleb $
!
! First, clear the modifiers
!
!clear    shift
!clear    lock
!clear    control
!clear    mod1
!clear    mod2
!clear    mod3
!clear    mod4
!clear    mod5
!
! Set the mapping for each key
!
keycode   8 = grave asciitilde
!keycode   9 = Escape
!keycode  10 = 1 exclam
!keycode  11 = 2 at
keycode  11 = 3 asterisk numbersign
keycode  12 = 4 ccedilla degree
!keycode  13 = 4 dollar
!keycode  14 = 5 percent
!keycode  15 = 6 asciicircum
!keycode  16 = 7 ampersand
!keycode  17 = 8 asterisk
!keycode  18 = 9 parenleft
!keycode  19 = 0 parenright
!keycode  20 = minus underscore
!keycode  21 = equal plus
!keycode  22 = BackSpace
!keycode  23 = Tab
!keycode  24 = q Q
!keycode  25 = w W
!keycode  26 = e E
!keycode  27 = r R
!keycode  28 = t T
!keycode  29 = y Y
!keycode  30 = u U
!keycode  31 = i I
!keycode  32 = o O
!keycode  33 = p P
!keycode  34 = bracketleft braceleft
keycode  35 = quotedbl exclam
!;eycode  35 = bracketright braceright
!keycode  36 = Return
!keycode  37 = Control_L
!keycode  38 = a A
!keycode  39 = s S
!keycode  40 = d D
!keycode  41 = f F
!keycode  42 = g G
!keycode  43 = h H
!keycode  44 = j J
!keycode  45 = k K
!keycode  46 = l L
!keycode  47 = semicolon colon
!keycode  48 = apostrophe quotedbl
!keycode  49 = grave asciitilde
!keycode  50 = Shift_L
!keycode  51 = backslash bar
!keycode  52 = z Z
!keycode  53 = x X
!keycode  54 = c C
!keycode  55 = v V
!keycode  56 = b B
!keycode  57 = n N
!keycode  58 = m M
!keycode  59 = comma less
!keycode  60 = period greater
!keycode  61 = slash question
!keycode  62 = Shift_R
!keycode  63 = KP_Multiply
!keycode  64 = Alt_L Meta_L
!keycode  65 = space
!keycode  66 = Caps_Lock
!keycode  67 = F1
!keycode  68 = F2
!keycode  69 = F3
!keycode  70 = F4
!keycode  71 = F5
!keycode  72 = F6
!keycode  73 = F7
!keycode  74 = F8
!keycode  75 = F9
!keycode  76 = F10
!keycode  77 = Num_Lock
!keycode  78 = Multi_key
!keycode  79 = KP_Home KP_7
!keycode  80 = KP_Up KP_8
!keycode  81 = KP_Prior KP_9
!keycode  82 = KP_Subtract
!keycode  83 = KP_Left KP_4
!keycode  84 = NoSymbol KP_5
!keycode  85 = KP_Right KP_6
!keycode  86 = KP_Add
!keycode  87 = KP_End KP_1
!keycode  88 = KP_Down KP_2
!keycode  89 = KP_Next KP_3
!keycode  90 = KP_Insert KP_0
!keycode  91 = KP_Delete KP_Decimal
!keycode  92 = X386Sys_Req
!keycode  93 =
!keycode  94 =
!keycode  95 = F11
!keycode  96 = F12
!! keycodes 97-107 are not available on 84-key keyboards
!keycode  97 = Home
!keycode  98 = Up
!keycode  99 = Prior
!keycode 100 = Left
!keycode 101 = Begin
!keycode 102 = Right
!keycode 103 = End
!keycode 104 = Down
!keycode 105 = Next
!keycode 106 = Insert
!keycode 107 = Delete
!keycode 108 = KP_Enter
!keycode 109 = Control_R
!keycode 110 = Pause
!keycode 111 = Print
!keycode 112 = KP_Divide
!keycode 113 = Alt_R Meta_R
!keycode 114 = Break
! keycodes 115-117 are only available on some extended keyboards
! (e.g., Microsoft's ergonomic keyboard).
!keycode 115 = Meta_L
!keycode 116 = Meta_R
!keycode 117 = Menu
!
! Set the modifiers
!
!add     shift   = Shift_L Shift_R
!add     lock    = Caps_Lock
!add     control = Control_L Control_R
!add     mod1    = Alt_L Alt_R
! If you have ServerNumlock set in your XF86Config, you can comment out
!add     mod2    = Num_Lock
!
!
!
! If you use any of the special default key mappings in Xconfig, they should be
! duplicated in this file.  Mappings should be added before the section above
! which sets the modifiers.
!
!  For the key specs:
!     LeftAlt     =>  keycode  64
!     RightAlt    =>  keycode 113
!     AltGr       =>  keycode 113
!     ScrollLock  =>  keycode  78
!     RightCtl    =>  keycode 109
!     
!  For the mappings:
!     Meta        =>  Alt_L Meta_L
!                     Alt_R Meta_R
!     Compose     =>  Multi_key
!     ModeShift   =>  Mode_switch
!     ModeLock    =>  Mode_switch X386Mode_Lock
!     ScrollLock  =>  Scroll_Lock
!     Control     =>  Control_R
!    
!  If you use ModeShift or ModeLock, the following modifier must be set:
!
!add     mod5    = Mode_switch
!
!  For example, to get the equivalent of:
!
!  ScrollLock  ModeLock
!  RightAlt    ModeShift
!  LeftAlt     Meta
!  RightCtl    Compose
!
!  use the following:
!
!keycode  78 = Mode_switch X386Mode_Lock
!keycode 113 = Mode_switch
!keycode  64 = Alt_L Meta_L
!keycode 109 = Multi_key
!
!add    mod5   = Mode_switch

! When using ServerNumLock in your XF86Config, the following codes/symbols
! are available in place of 79-81, 83-85, 87-91
!keycode  136 = KP_7
!keycode  137 = KP_8
!keycode  138 = KP_9
!keycode  139 = KP_4
!keycode  140 = KP_5
!keycode  141 = KP_6
!keycode  142 = KP_1
!keycode  143 = KP_2
!keycode  144 = KP_3
!keycode  145 = KP_0
!keycode  146 = KP_Decimal
!keycode  147 = Home
!keycode  148 = Up
!keycode  149 = Prior
!keycode  150 = Left
!keycode  151 = Begin
!keycode  152 = Right
!keycode  153 = End
!keycode  154 = Down
!keycode  155 = Next
!keycode  156 = Insert
!keycode  157 = Delete