----------------------------------------- Version 12.4.0-Build26.48 2020-04-19T17:47:38 ----------------------------------------- Patch: SUSE-2014-85 Released: Tue Nov 4 16:29:29 2014 Summary: Recommended update for dirmngr Severity: moderate References: 901845 Description: This update for dirmngr fixes a segmentation fault at start up. (bnc#901845) ----------------------------------------- Patch: SUSE-2014-66 Released: Thu Nov 6 06:23:15 2014 Summary: Recommended update for gcc48 Severity: moderate References: 899871 Description: This update for gcc48 fixes a performance degradation issue caused by generation of unneeded code whe using option -pg. ----------------------------------------- Patch: SUSE-2014-97 Released: Fri Nov 28 10:20:32 2014 Summary: Security update for file Severity: moderate References: 888308,902367,CVE-2014-3710 Description: file was updated to fix one security issue. This security issue was fixed: - Out-of-bounds read in elf note headers (CVE-2014-3710). This non-security issues was fixed: - Correctly identify GDBM files created by libgdbm4 (bnc#888308). ----------------------------------------- Patch: SUSE-2014-113 Released: Tue Dec 2 18:17:57 2014 Summary: Security update for cpio Severity: moderate References: 658010,907456,CVE-2014-9112 Description: This cpio security update fixes the following buffer overflow issue and two non security issues: - fix an OOB write with cpio -i (bnc#907456) (CVE-2014-9112) - prevent cpio from extracting over a symlink (bnc#658010) - fix a truncation check in mt ----------------------------------------- Patch: SUSE-2015-16 Released: Thu Dec 11 09:25:27 2014 Summary: Security update for libksba Severity: moderate References: 907074,CVE-2014-9087 Description: This libksba update fixes the following security issue: - bnc#907074: buffer overflow in OID processing (CVE-2014-9087) ----------------------------------------- Patch: SUSE-2014-126 Released: Fri Dec 19 20:16:00 2014 Summary: Security update for file Severity: moderate References: 910252,910253,CVE-2014-8116,CVE-2014-8117 Description: This file update fixes the following security issues: - bsc#910252: multiple denial of service issues (resource consumption) (CVE-2014-8116) - bsc#910253: denial of service issue (resource consumption) (CVE-2014-8117) ----------------------------------------- Patch: SUSE-2014-124 Released: Mon Dec 22 09:33:18 2014 Summary: Security update for libssh Severity: moderate References: 910790,CVE-2014-8132 Description: This libssh update fixes the following security issue: - bsc#910790: Double free on dangling pointers in initial key exchange packet (CVE-2014-8132). ----------------------------------------- Patch: SUSE-2015-50 Released: Thu Jan 15 16:33:18 2015 Summary: Recommended update for ca-certificates-mozilla Severity: moderate References: 888534 Description: The system root SSL certificates were updated to match Mozilla NSS 2.2. Some removed/disabled 1024 bit certificates were temporarily reenabled/readded, as openssl and gnutls have a different handling of intermediates than mozilla nss and would otherwise not recognize SSL certificates from commonly used sites like Amazon. Updated to 2.2 (bnc#888534) - The following CAs were added: + COMODO_RSA_Certification_Authority codeSigning emailProtection serverAuth + GlobalSign_ECC_Root_CA_-_R4 codeSigning emailProtection serverAuth + GlobalSign_ECC_Root_CA_-_R5 codeSigning emailProtection serverAuth + USERTrust_ECC_Certification_Authority codeSigning emailProtection serverAuth + USERTrust_RSA_Certification_Authority codeSigning emailProtection serverAuth + VeriSign-C3SSA-G2-temporary-intermediate-after-1024bit-removal - The following CAs were changed: + Equifax_Secure_eBusiness_CA_1 remote code signing and https trust, leave email trust + Verisign_Class_3_Public_Primary_Certification_Authority_-_G2 only trust emailProtection - Updated to 2.1 (bnc#888534) - The following 1024-bit CA certificates were removed - Entrust.net Secure Server Certification Authority - ValiCert Class 1 Policy Validation Authority - ValiCert Class 2 Policy Validation Authority - ValiCert Class 3 Policy Validation Authority - TDC Internet Root CA - The following CA certificates were added: - Certification Authority of WoSign - CA 沃通根证书 - DigiCert Assured ID Root G2 - DigiCert Assured ID Root G3 - DigiCert Global Root G2 - DigiCert Global Root G3 - DigiCert Trusted Root G4 - QuoVadis Root CA 1 G3 - QuoVadis Root CA 2 G3 - QuoVadis Root CA 3 G3 - The Trust Bits were changed for the following CA certificates - Class 3 Public Primary Certification Authority - Class 3 Public Primary Certification Authority - Class 2 Public Primary Certification Authority - G2 - VeriSign Class 2 Public Primary Certification Authority - G3 - AC Raíz Certicámara S.A. - NetLock Uzleti (Class B) Tanusitvanykiado - NetLock Expressz (Class C) Tanusitvanykiado Temporary reenable some root ca trusts, as openssl/gnutls have trouble using intermediates as root CA. - GTE CyberTrust Global Root - Thawte Server CA - Thawte Premium Server CA - ValiCert Class 1 VA - ValiCert Class 2 VA - RSA Root Certificate 1 - Entrust.net Secure Server CA - America Online Root Certification Authority 1 - America Online Root Certification Authority 2 ----------------------------------------- Patch: SUSE-2015-40 Released: Thu Jan 15 18:35:11 2015 Summary: Security update for rpm Severity: important References: 892431,906803,908128,911228,CVE-2013-6435,CVE-2014-8118 Description: This rpm update fixes the following security and non-security issues: - bnc#908128: Check for bad invalid name sizes (CVE-2014-8118) - bnc#906803: Create files with mode 0 (CVE-2013-6435) - bnc#892431: Honor --noglob in install mode - bnc#911228: Fix noglob patch, it broke files with space. ----------------------------------------- Patch: SUSE-2015-76 Released: Fri Jan 30 15:01:03 2015 Summary: Security update for elfutils Severity: moderate References: 911662,CVE-2014-9447 Description: elfutils was updated to fix one security issue. This security issue was fixed: - Directory traversal vulnerability in the read_long_names function (CVE-2014-9447). ----------------------------------------- Patch: SUSE-2015-121 Released: Tue Feb 3 16:30:16 2015 Summary: Recommended update for pam Severity: low References: 912922 Description: This update for pam fixes updating of NIS passwords. ----------------------------------------- Patch: SUSE-2015-275 Released: Wed Mar 18 18:21:44 2015 Summary: Recommended update for procps Severity: low References: 901202,908516 Description: This update for procps provides the following fixes: - Add description of pgrep's --list-full parameter to usage instructions (--help). (bsc#901202) - Fix handling of arguments to -s option in free(1). (bsc#908516) - Correct package name in descriptions: procps, not props. ----------------------------------------- Patch: SUSE-2015-296 Released: Thu Jun 11 15:46:59 2015 Summary: Security update for libgcrypt Severity: moderate References: 896202,896435,898003,899524,900275,900276,905483,920057,928740,929919,CVE-2014-3591 Description: This update of libgcrypt fixes one security issue and brings various FIPS 140-2 related improvements. libgcrypt now uses ciphertext blinding for Elgamal decryption (CVE-2014-3591) FIPS 140-2 related changes: * The library performs its self-tests when the module is complete (the -hmac file is also installed). * Added a NIST 800-90a compliant DRBG. * Change DSA key generation to be FIPS 186-4 compliant. * Change RSA key generation to be FIPS 186-4 compliant. * Enable HW support in fips mode (bnc#896435) * Make DSA selftest use 2048 bit keys (bnc#898003) * Added ECDSA selftests and add support for it to the CAVS testing framework (bnc#896202) * Various CAVS testing improvements. ----------------------------------------- Patch: SUSE-2015-361 Released: Wed Jul 15 08:26:27 2015 Summary: Recommended update for gcc48, libffi48, libgcj48 Severity: moderate References: 889990,917169,919274,922534,924525,924687,927993,930176,934689 Description: The system compiler gcc48 was updated to the GCC 4.8.5 release, fixing a lot of bugs and bringing some improvements. It includes various bug fixes found by our customers: * Fixes bogus integer overflow in constant expression. [bnc#934689] * Fixes ICE with atomics on aarch64. [bnc#930176] * Includes fix for -imacros bug. [bnc#917169] * Includes fix for incorrect -Warray-bounds warnings. [bnc#919274] * Includes updated -mhotpatch for s390x. [bnc#924525] * Includes fix for ppc64le issue with doubleword vector extract. [bnc#924687] * Includes patches to allow building against ISL 0.14. * Backport rework of the memory allocator for C++ exceptions used in OOM situations. [bnc#889990] * Fix a reload issue on S390 (GCC PR66306). * Avoid accessing invalid memory when passing aggregates by value. [bnc#922534] ----------------------------------------- Patch: SUSE-2015-422 Released: Tue Jul 28 06:25:51 2015 Summary: The Toolchain module containing GCC 5.2 Severity: low References: 926412,936050,937823 Description: This update contains the release of the new SUSE Linux Enterprise Toolchain module. Its major feature is the GNU Compiler Collection 5.2, please see https://gcc.gnu.org/gcc-5/changes.html for important changes. This update also includes a version update of binutils to 2.25 release branch to provide features and bugfixes. Following features have been added to binutils: * IBM zSeries z13 hardware support (fate#318036, bnc#936050). * various IBM Power8 improvements (fate#318238, bnc#926412). * AVX512 support on the Intel EM64T platform (fate#318520). The GNU Debugger gdb was updated to version 7.9.1 bringing various features and lots of bugfixes. Also IBM zSeries z13 hardware support has been added to gdb. (fate#318039) ----------------------------------------- Patch: SUSE-2015-500 Released: Mon Aug 17 11:36:33 2015 Summary: Security update for libgcrypt Severity: moderate References: 920057,938343,CVE-2015-0837 Description: This update fixes the following issues: Security: * Fixed data-dependent timing variations in modular exponentiation [related to CVE-2015-0837, Last-Level Cache Side-Channel Attacks are Practical] (bsc#920057) Bugfixes: * don't drop privileges when locking secure memory (bsc#938343) ----------------------------------------- Patch: SUSE-2015-530 Released: Wed Aug 26 03:07:07 2015 Summary: Recommended update for sed Severity: low References: 933029 Description: This update for sed fixes the behavior of --follow-symlinks when reading from the standard input (stdin). The behavior of 'sed --follow-symlinks -' is now identical to 'sed -'. In both cases, sed will read from the standard input and no longer from a file named '-'. ----------------------------------------- Patch: SUSE-2015-568 Released: Wed Sep 16 13:30:12 2015 Summary: Recommended update for grep Severity: low References: 920386 Description: This update for grep fixes undefined behaviour with -P and non-utf-8 data. ----------------------------------------- Patch: SUSE-2015-660 Released: Thu Oct 1 10:54:19 2015 Summary: Security update for libssh Severity: moderate References: 928323,CVE-2015-3146 Description: The encryption library libssh was updated to fix one security issue. The following vulnerability was fixed: * CVE-2015-3146: Unauthenticated remote attackers could crash the server or client with specially crafted packages. ----------------------------------------- Patch: SUSE-2015-922 Released: Tue Dec 22 08:44:25 2015 Summary: Security update for gpg2 Severity: moderate References: 918089,918090,952347,955753,CVE-2015-1606,CVE-2015-1607 Description: The gpg2 package was updated to fix the following security and non security issues: - CVE-2015-1606: Fixed invalid memory read using a garbled keyring (bsc#918089). - CVE-2015-1607: Fixed memcpy with overlapping ranges (bsc#918090). - bsc#955753: Fixed a regression of 'gpg --recv' due to keyserver import filter (also boo#952347). ----------------------------------------- Patch: SUSE-2015-869 Released: Wed Dec 23 10:01:16 2015 Summary: Recommended update for libksba Severity: moderate References: 926826 Description: The libksba package was updated to fix the following security issues: - Fixed an integer overflow, an out of bounds read and a stack overflow issues (bsc#926826). ----------------------------------------- Patch: SUSE-2015-862 Released: Wed Dec 23 17:40:51 2015 Summary: Recommended update for acl Severity: moderate References: 945899 Description: This update for acl provides the following fixes: - Fix segmentation fault of getfacl -e on overly long group name. - Make sure that acl_from_text() always sets errno when it fails. - Fix memory and resource leaks in getfacl. ----------------------------------------- Patch: SUSE-2016-46 Released: Fri Jan 8 12:37:34 2016 Summary: Recommended update for gcr, gnome-keyring, libgcrypt, libsecret Severity: moderate References: 932232 Description: This update for gcr, gnome-keyring, libgcrypt, libsecret fixes issues when the system operates in FIPS mode. The various GNOME libraries and tool have been changed to use the default libgcrypt allocators. GNOME keyring was changed not to use MD5 anymore. libgcrypt was adjusted to free the DRBG on exit to avoid crashes. ----------------------------------------- Patch: SUSE-2016-359 Released: Tue Mar 1 16:48:55 2016 Summary: Security update for libssh Severity: moderate References: 965875,CVE-2016-0739 Description: This update for libssh fixes the following issues: - CVE-2016-0739: Fix Weakness in diffie-hellman secret key generation. (bsc#965875) ----------------------------------------- Patch: SUSE-2016-371 Released: Thu Mar 3 15:58:18 2016 Summary: Recommended update for insserv-compat Severity: low References: 960820 Description: This update for insserv-compat fixes the name of the ntpd service. ----------------------------------------- Patch: SUSE-2016-462 Released: Wed Mar 16 18:17:59 2016 Summary: Recommended update for libcap Severity: low References: 967838 Description: This update for libcap adds two new capabilities (CAP_WAKE_ALARM and CAP_BLOCK_SUSPEND) which are available in Linux Kernel 3.12. ----------------------------------------- Patch: SUSE-2016-543 Released: Fri Apr 1 18:44:16 2016 Summary: Recommended update for libgcrypt Severity: moderate References: 970882 Description: This update for libgcrypt fixes a crash in GPG key generation when operating in FIPS mode. (bsc#970882) ----------------------------------------- Patch: SUSE-2016-565 Released: Wed Apr 6 16:26:42 2016 Summary: Security update for gcc5 Severity: moderate References: 939460,945842,952151,953831,954002,955382,962765,964468,966220,968771,CVE-2015-5276 Description: The GNU Compiler Collection was updated to version 5.3.1, which brings several fixes and enhancements. The following security issue has been fixed: - Fix C++11 std::random_device short read issue that could lead to predictable randomness. (CVE-2015-5276, bsc#945842) The following non-security issues have been fixed: - Enable frame pointer for TARGET_64BIT_MS_ABI when stack is misaligned. Fixes internal compiler error when building Wine. (bsc#966220) - Fix a PowerPC specific issue in gcc-go that broke compilation of newer versions of Docker. (bsc#964468) - Fix HTM built-ins on PowerPC. (bsc#955382) - Fix libgo certificate lookup. (bsc#953831) - Suppress deprecated-declarations warnings for inline definitions of deprecated virtual methods. (bsc#939460) - Build s390[x] with '--with-tune=z9-109 --with-arch=z900' on SLE11 again. (bsc#954002) - Revert accidental libffi ABI breakage on aarch64. (bsc#968771) - On x86_64, set default 32bit code generation to -march=x86-64 rather than -march=i586. - Add experimental File System TS library. ----------------------------------------- Patch: SUSE-2016-587 Released: Fri Apr 8 17:06:56 2016 Summary: Recommended update for ca-certificates-mozilla Severity: moderate References: 973042 Description: The root SSL certificate store ca-certificates-mozilla was updated to version 2.7 of the Mozilla NSS equivalent. (bsc#973042) - Newly added CAs: * CA WoSign ECC Root * Certification Authority of WoSign * Certification Authority of WoSign G2 * Certinomis - Root CA * Certum Trusted Network CA 2 * CFCA EV ROOT * COMODO RSA Certification Authority * DigiCert Assured ID Root G2 * DigiCert Assured ID Root G3 * DigiCert Global Root G2 * DigiCert Global Root G3 * DigiCert Trusted Root G4 * Entrust Root Certification Authority - EC1 * Entrust Root Certification Authority - G2 * GlobalSign * IdenTrust Commercial Root CA 1 * IdenTrust Public Sector Root CA 1 * OISTE WISeKey Global Root GB CA * QuoVadis Root CA 1 G3 * QuoVadis Root CA 2 G3 * QuoVadis Root CA 3 G3 * Staat der Nederlanden EV Root CA * Staat der Nederlanden Root CA - G3 * S-TRUST Universal Root CA * SZAFIR ROOT CA2 * TÜRKTRUST Elektronik Sertifika Hizmet Sağlayıcısı H5 * TÜRKTRUST Elektronik Sertifika Hizmet Sağlayıcısı H6 * USERTrust ECC Certification Authority * USERTrust RSA Certification Authority * 沃通根证书 - Removed CAs: * AOL CA * A Trust nQual 03 * Buypass Class 3 CA 1 * CA Disig * Digital Signature Trust Co Global CA 1 * Digital Signature Trust Co Global CA 3 * E Guven Kok Elektronik Sertifika Hizmet Saglayicisi * NetLock Expressz (Class C) Tanusitvanykiado * NetLock Kozjegyzoi (Class A) Tanusitvanykiado * NetLock Minositett Kozjegyzoi (Class QA) Tanusitvanykiado * NetLock Uzleti (Class B) Tanusitvanykiado * SG TRUST SERVICES RACINE * Staat der Nederlanden Root CA * TC TrustCenter Class 2 CA II * TC TrustCenter Universal CA I * TDC Internet Root CA * UTN DATACorp SGC Root CA * Verisign Class 1 Public Primary Certification Authority - G2 * Verisign Class 3 Public Primary Certification Authority * Verisign Class 3 Public Primary Certification Authority - G2 - Removed server trust from: * AC Raíz Certicámara S.A. * ComSign Secured CA * NetLock Uzleti (Class B) Tanusitvanykiado * NetLock Business (Class B) Root * NetLock Expressz (Class C) Tanusitvanykiado * TC TrustCenter Class 3 CA II * TURKTRUST Certificate Services Provider Root 1 * TURKTRUST Certificate Services Provider Root 2 * Equifax Secure Global eBusiness CA-1 * Verisign Class 4 Public Primary Certification Authority G3 - Enable server trust for: * Actalis Authentication Root CA ----------------------------------------- Patch: SUSE-2016-636 Released: Mon Apr 18 09:18:19 2016 Summary: Security update for libgcrypt Severity: moderate References: 965902,CVE-2015-7511 Description: libgcrypt was updated to fix one security issue. This security issue was fixed: - CVE-2015-7511: Side-channel attack on ECDH with Weierstrass curves (bsc#965902). ----------------------------------------- Patch: SUSE-2016-643 Released: Tue Apr 19 09:23:39 2016 Summary: Recommended update for bzip2 Severity: low References: 970260 Description: This update for bzip2 fixes the following issues: - Fix bzgrep wrapper that always returns 0 as exit code when working on multiple archives, even when the pattern is not found. ----------------------------------------- Patch: SUSE-2016-835 Released: Wed May 25 18:27:30 2016 Summary: Recommended update for libgcrypt Severity: moderate References: 979629 Description: This update for libgcrypt fixes the following issue: - Fix failing reboot after installing fips pattern (bsc#979629) ----------------------------------------- Patch: SUSE-2016-898 Released: Tue Jun 7 09:48:12 2016 Summary: Security update for expat Severity: important References: 979441,980391,CVE-2015-1283,CVE-2016-0718 Description: This update for expat fixes the following issues: Security issue fixed: - CVE-2016-0718: Fix Expat XML parser that mishandles certain kinds of malformed input documents. (bsc#979441) - CVE-2015-1283: Fix multiple integer overflows. (bnc#980391) ----------------------------------------- Patch: SUSE-2016-900 Released: Tue Jun 7 10:58:37 2016 Summary: Security update for libksba Severity: moderate References: 979261,979906,CVE-2016-4574,CVE-2016-4579 Description: This update for libksba fixes the following issues: - CVE-2016-4579: Out-of-bounds read in _ksba_ber_parse_tl() - CVE-2016-4574: two OOB read access bugs (remote DoS) (bsc#979261) Also adding reliability fixes from v1.3.4. ----------------------------------------- Patch: SUSE-2016-987 Released: Wed Jun 22 14:32:18 2016 Summary: Recommended update for procps Severity: low References: 981616 Description: This update for procps fixes the following issues: - Improve pmap(1) to be compatible with kernel 4.4. (bsc#981616) ----------------------------------------- Patch: SUSE-2016-1028 Released: Thu Jul 7 11:50:47 2016 Summary: Recommended update for findutils Severity: moderate References: 986935 Description: This update for findutils fixes the following issues: - find -exec + would not pass all arguments for certain specific filename lengths (bsc#986935) ----------------------------------------- Patch: SUSE-2016-1205 Released: Thu Aug 11 15:02:18 2016 Summary: Recommended update for rpm Severity: low References: 829717,894610,940315,953532,965322,967728 Description: This update for rpm provides the following fixes: - Add is_opensuse and leap_version macros to suse_macros. (bsc#940315) - Add option to make postinstall scriptlet errors fatal. (bsc#967728) - Normalize big blocksizes to 4096 bytes. (bsc#894610, bsc#829717, bsc#965322) - Fix updating of sources/patches when recursing because of a BuildArch. (bsc#953532) ----------------------------------------- Patch: SUSE-2016-1247 Released: Fri Aug 19 12:58:39 2016 Summary: Security update for cracklib Severity: moderate References: 992966,CVE-2016-6318 Description: This update for cracklib fixes the following issues: - Add patch to fix a buffer overflow in GECOS parser (bsc#992966 CVE-2016-6318) ----------------------------------------- Patch: SUSE-2016-1326 Released: Thu Sep 8 11:37:44 2016 Summary: Security update for perl Severity: moderate References: 928292,932894,967082,984906,987887,988311,CVE-2015-8853,CVE-2016-1238,CVE-2016-2381,CVE-2016-6185 Description: This update for Perl fixes the following issues: - CVE-2016-6185: Xsloader looking at a '(eval)' directory. (bsc#988311) - CVE-2016-1238: Searching current directory for optional modules. (bsc#987887) - CVE-2015-8853: Regular expression engine hanging on bad utf8. (bsc) - CVE-2016-2381: Environment dup handling bug. (bsc#967082) - 'Insecure dependency in require' error in taint mode. (bsc#984906) - Memory leak in 'use utf8' handling. (bsc#928292) - Missing lock prototype to the debugger. (bsc#932894) ----------------------------------------- Patch: SUSE-2016-1358 Released: Thu Sep 15 20:54:21 2016 Summary: Optional update for gcc6 Severity: low References: 983206 Description: This update ships the GNU Compiler Collection (GCC) in version 6.2. This update is shipped in two parts: - SUSE Linux Enterprise Server 12 and Desktop: The runtime libraries libgcc_s1, libstdc++6, libatomic1, libgomp1, libitm1 and some others can now be used by GCC 6 built binaries. - SUSE Linux Enterprise 12 Toolchain Module: The Toolchain module received the GCC 6 compiler suite with this update. Changes: - The default mode for C++ is now -std=gnu++14 instead of -std=gnu++98. Generic Optimization improvements: - UndefinedBehaviorSanitizer gained a new sanitization option, -fsanitize=bounds-strict, which enables strict checking of array bounds. In particular, it enables -fsanitize=bounds as well as instrumentation of flexible array member-like arrays. - Type-based alias analysis now disambiguates accesses to different pointers. This improves precision of the alias oracle by about 20-30% on higher-level C++ programs. Programs doing invalid type punning of pointer types may now need -fno-strict-aliasing to work correctly. - Alias analysis now correctly supports weakref and alias attributes. This makes it possible to access both a variable and its alias in one translation unit which is common with link-time optimization. - Value range propagation now assumes that the this pointer of C++ member functions is non-null. This eliminates common null pointer checks but also breaks some non-conforming code-bases (such as Qt-5, Chromium, KDevelop). As a temporary work-around -fno-delete-null-pointer-checks can be used. Wrong code can be identified by using -fsanitize=undefined. - Various Link-time optimization improvements. - Inter-procedural optimization improvements: - Basic jump threading is now performed before profile construction and inline analysis, resulting in more realistic size and time estimates that drive the heuristics of the of inliner and function cloning passes. - Function cloning now more aggressively eliminates unused function parameters. - Compared to GCC 5, the GCC 6 release series includes a much improved implementation of the OpenACC 2.0a specification. C language specific improvements: - Version 4.5 of the OpenMP specification is now supported in the C and C++ compilers. - Source locations for the C and C++ compilers are now tracked as ranges, rather than just points, making it easier to identify the subexpression of interest within a complicated expression. In addition, there is now initial support for precise diagnostic locations within strings, - Diagnostics can now contain 'fix-it hints', which are displayed in context underneath the relevant source code. - The C and C++ compilers now offer suggestions for misspelled field names. - New command-line options have been added for the C and C++ compilers: - -Wshift-negative-value warns about left shifting a negative value. - -Wshift-overflow warns about left shift overflows. This warning is enabled by default. -Wshift-overflow=2 also warns about left-shifting 1 into the sign bit. - -Wtautological-compare warns if a self-comparison always evaluates to true or false. This warning is enabled by -Wall. - -Wnull-dereference warns if the compiler detects paths that trigger erroneous or undefined behavior due to dereferencing a null pointer. This option is only active when -fdelete-null-pointer-checks is active, which is enabled by optimizations in most targets. The precision of the warnings depends on the optimization options used. - -Wduplicated-cond warns about duplicated conditions in an if-else-if chain. - -Wmisleading-indentation warns about places where the indentation of the code gives a misleading idea of the block structure of the code to a human reader. This warning is enabled by -Wall. - The C and C++ compilers now emit saner error messages if merge-conflict markers are present in a source file. C improvements: - It is possible to disable warnings when an initialized field of a structure or a union with side effects is being overridden when using designated initializers via a new warning option -Woverride-init-side-effects. - A new type attribute scalar_storage_order applying to structures and unions has been introduced. It specifies the storage order (aka endianness) in memory of scalar fields in structures or unions. C++ improvements: - The default mode has been changed to -std=gnu++14. - C++ Concepts are now supported when compiling with -fconcepts. - -flifetime-dse is more aggressive in dead-store elimination in situations where a memory store to a location precedes a constructor to that memory location. - G++ now supports C++17 fold expressions, u8 character literals, extended static_assert, and nested namespace definitions. - G++ now allows constant evaluation for all non-type template arguments. - G++ now supports C++ Transactional Memory when compiling with -fgnu-tm. libstdc++ improvements: - Extensions to the C++ Library to support mathematical special functions (ISO/IEC 29124:2010), thanks to Edward Smith-Rowland. - Experimental support for C++17. - An experimental implementation of the File System TS. - Experimental support for most features of the second version of the Library Fundamentals TS. This includes polymorphic memory resources and array support in shared_ptr, thanks to Fan You. - Some assertions checked by Debug Mode can now also be enabled by _GLIBCXX_ASSERTIONS. The subset of checks enabled by the new macro have less run-time overhead than the full _GLIBCXX_DEBUG checks and don't affect the library ABI, so can be enabled per-translation unit. Fortran improvements: - Fortran 2008 SUBMODULE support. - Fortran 2015 EVENT_TYPE, EVENT_POST, EVENT_WAIT, and EVENT_QUERY support. - Improved support for Fortran 2003 deferred-length character variables. - Improved support for OpenMP and OpenACC. - The MATMUL intrinsic is now inlined for straightforward cases if front-end optimization is active. The maximum size for inlining can be set to n with the -finline-matmul-limit=n option and turned off with -finline-matmul-limit=0. - The -Wconversion-extra option will warn about REAL constants which have excess precision for their kind. - The -Winteger-division option has been added, which warns about divisions of integer constants which are truncated. This option is included in -Wall by default. Architecture improvements: - AArch64 received a lot of improvements. IA-32/x86-64 improvements: - GCC now supports the Intel CPU named Skylake with AVX-512 extensions through -march=skylake-avx512. The switch enables the following ISA extensions: AVX-512F, AVX512VL, AVX-512CD, AVX-512BW, AVX-512DQ. - Support for new AMD instructions monitorx and mwaitx has been added. This includes new intrinsic and built-in support. It is enabled through option -mmwaitx. The instructions monitorx and mwaitx implement the same functionality as the old monitor and mwait instructions. In addition mwaitx adds a configurable timer. The timer value is received as third argument and stored in register %ebx. - x86-64 targets now allow stack realignment from a word-aligned stack pointer using the command-line option -mstackrealign or __attribute__ ((force_align_arg_pointer)). This allows functions compiled with a vector-aligned stack to be invoked from objects that keep only word-alignment. - Support for address spaces __seg_fs, __seg_gs, and __seg_tls. These can be used to access data via the %fs and %gs segments without having to resort to inline assembly. - Support for AMD Zen (family 17h) processors is now available through the -march=znver1 and -mtune=znver1 options. PowerPC / PowerPC64 / RS6000 improvements: - PowerPC64 now supports IEEE 128-bit floating-point using the __float128 data type. In GCC 6, this is not enabled by default, but you can enable it with -mfloat128. The IEEE 128-bit floating-point support requires the use of the VSX instruction set. IEEE 128-bit floating-point values are passed and returned as a single vector value. The software emulator for IEEE 128-bit floating-point support is only built on PowerPC GNU/Linux systems where the default CPU is at least power7. On future ISA 3.0 systems (POWER 9 and later), you will be able to use the -mfloat128-hardware option to use the ISA 3.0 instructions that support IEEE 128-bit floating-point. An additional type (__ibm128) has been added to refer to the IBM extended double type that normally implements long double. This will allow for a future transition to implementing long double with IEEE 128-bit floating-point. - Basic support has been added for POWER9 hardware that will use the recently published OpenPOWER ISA 3.0 instructions. The following new switches are available: - -mcpu=power9: Implement all of the ISA 3.0 instructions supported by the compiler. - -mtune=power9: In the future, apply tuning for POWER9 systems. Currently, POWER8 tunings are used. - -mmodulo: Generate code using the ISA 3.0 integer instructions (modulus, count trailing zeros, array index support, integer multiply/add). - -mpower9-fusion: Generate code to suitably fuse instruction sequences for a POWER9 system. - -mpower9-dform: Generate code to use the new D-form (register+offset) memory instructions for the vector registers. - -mpower9-vector: Generate code using the new ISA 3.0 vector (VSX or Altivec) instructions. - -mpower9-minmax: Reserved for future development. - -mtoc-fusion: Keep TOC entries together to provide more fusion opportunities. - New constraints have been added to support IEEE 128-bit floating-point and ISA 3.0 instructions. - Support has been added for __builtin_cpu_is() and __builtin_cpu_supports(), allowing for very fast access to AT_PLATFORM, AT_HWCAP, and AT_HWCAP2 values. This requires use of glibc 2.23 or later. - All hardware transactional memory builtins now correctly behave as memory barriers. Programmers can use #ifdef __TM_FENCE__ to determine whether their 'old' compiler treats the builtins as barriers. - Split-stack support has been added for gccgo on PowerPC64 for both big- and little-endian (but not for 32-bit). The gold linker from at least binutils 2.25.1 must be available in the PATH when configuring and building gccgo to enable split stack. (The requirement for binutils 2.25.1 applies to PowerPC64 only.) The split-stack feature allows a small initial stack size to be allocated for each goroutine, which increases as needed. - GCC on PowerPC now supports the standard lround function. - The 'q', 'S', 'T', and 't' asm-constraints have been removed. - The 'b', 'B', 'm', 'M', and 'W' format modifiers have been removed. S/390, System z, IBM z Systems improvements: - Support for the IBM z13 processor has been added. When using the -march=z13 option, the compiler will generate code making use of the new instructions and registers introduced with the vector extension facility. The -mtune=z13 option enables z13 specific instruction scheduling without making use of new instructions. - Compiling code with -march=z13 reduces the default alignment of vector types bigger than 8 bytes to 8. This is an ABI change and care must be taken when linking modules compiled with different arch levels which interchange variables containing vector type values. For newly compiled code the GNU linker will emit a warning. - The -mzvector option enables a C/C++ language extension. This extension provides a new keyword vector which can be used to define vector type variables. (Note: This is not available when enforcing strict standard compliance e.g. with -std=c99. Either enable GNU extensions with e.g. -std=gnu99 or use __vector instead of vector.) - Additionally a set of overloaded builtins is provided which is partially compatible to the PowerPC Altivec builtins. In order to make use of these builtins the vecintrin.h header file needs to be included. - The new command line options -march=native, and -mtune=native are now available on native IBM z Systems. Specifying these options will cause GCC to auto-detect the host CPU and rewrite these options to the optimal setting for that system. If GCC is unable to detect the host CPU these options have no effect. - The IBM z Systems port now supports target attributes and pragmas. Please refer to the documentation for details of available attributes and pragmas as well as usage instructions. - -fsplit-stack is now supported as part of the IBM z Systems port. This feature requires a recent gold linker to be used. - Support for the g5 and g6 -march=/-mtune= CPU level switches has been deprecated and will be removed in a future GCC release. -m31 from now on defaults to -march=z900 if not specified otherwise. -march=native on a g5/g6 machine will default to -march=z900. An even more detailed list of features can be found at: https://gcc.gnu.org/gcc-6/changes.html ----------------------------------------- Patch: SUSE-2016-1370 Released: Wed Sep 21 12:58:14 2016 Summary: Security update for libgcrypt Severity: moderate References: 994157,CVE-2016-6313 Description: This update for libgcrypt fixes the following issues: - RNG prediction vulnerability (bsc#994157, CVE-2016-6313) ----------------------------------------- Patch: SUSE-2016-1614 Released: Mon Nov 7 20:01:31 2016 Summary: Recommended update for shadow Severity: low References: 1002975 Description: This update for shadow fixes the following issues: - Set file modes according to the permissions package and don't attempt to manipulate them in %files section. (bsc#1002975) ----------------------------------------- Patch: SUSE-2016-1744 Released: Fri Dec 2 11:42:41 2016 Summary: Security update for pcre Severity: moderate References: 906574,924960,933288,933878,936227,942865,957566,957567,957598,957600,960837,971741,972127,CVE-2014-8964,CVE-2015-2325,CVE-2015-2327,CVE-2015-2328,CVE-2015-3210,CVE-2015-3217,CVE-2015-5073,CVE-2015-8380,CVE-2015-8381,CVE-2015-8382,CVE-2015-8383,CVE-2015-8384,CVE-2015-8385,CVE-2015-8386,CVE-2015-8387,CVE-2015-8388,CVE-2015-8389,CVE-2015-8390,CVE-2015-8391,CVE-2015-8392,CVE-2015-8393,CVE-2015-8394,CVE-2015-8395,CVE-2016-1283,CVE-2016-3191 Description: This update for pcre to version 8.39 (bsc#972127) fixes several issues. If you use pcre extensively please be aware that this is an update to a new version. Please make sure that your software works with the updated version. This version fixes a number of vulnerabilities that affect pcre and applications using the libary when accepting untrusted input as regular expressions or as part thereof. Remote attackers could have caused the application to crash, disclose information or potentially execute arbitrary code. These security issues were fixed: - CVE-2014-8964: Heap-based buffer overflow in PCRE allowed remote attackers to cause a denial of service (crash) or have other unspecified impact via a crafted regular expression, related to an assertion that allows zero repeats (bsc#906574). - CVE-2015-2325: Heap buffer overflow in compile_branch() (bsc#924960). - CVE-2015-3210: Heap buffer overflow in pcre_compile2() / compile_regex() (bsc#933288) - CVE-2015-3217: PCRE Library Call Stack Overflow Vulnerability in match() (bsc#933878). - CVE-2015-5073: Library Heap Overflow Vulnerability in find_fixedlength() (bsc#936227). - bsc#942865: heap overflow in compile_regex() - CVE-2015-8380: The pcre_exec function in pcre_exec.c mishandled a // pattern with a \01 string, which allowed remote attackers to cause a denial of service (heap-based buffer overflow) or possibly have unspecified other impact via a crafted regular expression, as demonstrated by a JavaScript RegExp object encountered by Konqueror (bsc#957566). - CVE-2015-2327: PCRE mishandled certain patterns with internal recursive back references, which allowed remote attackers to cause a denial of service (segmentation fault) or possibly have unspecified other impact via a crafted regular expression, as demonstrated by a JavaScript RegExp object encountered by Konqueror (bsc#957567). - bsc#957598: Various security issues - CVE-2015-8381: Heap Overflow in compile_regex() (bsc#957598). - CVE-2015-8382: Regular Expression Uninitialized Pointer Information Disclosure Vulnerability (ZDI-CAN-2547)(bsc#957598). - CVE-2015-8383: Buffer overflow caused by repeated conditional group(bsc#957598). - CVE-2015-8384: Buffer overflow caused by recursive back reference by name within certain group(bsc#957598). - CVE-2015-8385: Buffer overflow caused by forward reference by name to certain group(bsc#957598). - CVE-2015-8386: Buffer overflow caused by lookbehind assertion(bsc#957598). - CVE-2015-8387: Integer overflow in subroutine calls(bsc#957598). - CVE-2015-8388: Buffer overflow caused by certain patterns with an unmatched closing parenthesis(bsc#957598). - CVE-2015-8389: Infinite recursion in JIT compiler when processing certain patterns(bsc#957598). - CVE-2015-8390: Reading from uninitialized memory when processing certain patterns(bsc#957598). - CVE-2015-8391: Some pathological patterns causes pcre_compile() to run for a very long time(bsc#957598). - CVE-2015-8392: Buffer overflow caused by certain patterns with duplicated named groups(bsc#957598). - CVE-2015-8393: Information leak when running pcgrep -q on crafted binary(bsc#957598). - CVE-2015-8394: Integer overflow caused by missing check for certain conditions(bsc#957598). - CVE-2015-8395: Buffer overflow caused by certain references(bsc#957598). - CVE-2015-2328: PCRE mishandled the /((?(R)a|(?1)))+/ pattern and related patterns with certain recursion, which allowed remote attackers to cause a denial of service (segmentation fault) or possibly have unspecified other impact via a crafted regular expression (bsc#957600). - CVE-2016-1283: The pcre_compile2 function in pcre_compile.c in PCRE mishandled certain patterns with named subgroups, which allowed remote attackers to cause a denial of service (heap-based buffer overflow) or possibly have unspecified other impact via a crafted regular expression (bsc#960837). - CVE-2016-3191: The compile_branch function in pcre_compile.c in pcre2_compile.c mishandled patterns containing an (*ACCEPT) substring in conjunction with nested parentheses, which allowed remote attackers to execute arbitrary code or cause a denial of service (stack-based buffer overflow) via a crafted regular expression (bsc#971741). These non-security issues were fixed: - JIT compiler improvements - performance improvements - The Unicode data tables have been updated to Unicode 7.0.0. ----------------------------------------- Patch: SUSE-2016-1782 Released: Fri Dec 9 13:35:02 2016 Summary: Recommended update for systemd Severity: moderate References: 1001790,1004289,1005404,1006372,1006690,989831,991443 Description: This update for systemd provides the following fixes: - Allow to redirect confirmation messages to a different console. (bsc#1006690) - Do not bind a mount unit to a device, if it was from mountinfo. (bsc#989831) - Decrease systemd-nspawn's non-fatal mount errors to debug level. (bsc#1004289) - Don't emit space usage message right after opening the persistent journal. (bsc#991443) - Change owner of /var/log/journal/remote and create /var/lib/systemd/journal-upload. (bsc#1006372) - Document that *KeyIgnoreInhibited only apply to a subset of locks. - Revert 'logind: really handle *KeyIgnoreInhibited options in logind.conf'. (bsc#1001790, bsc#1005404) - Revert 'kbd-model-map: add more mappings offered by Yast'. - Don't busy loop when we get a notification message we can't process. - Rename kbd-model-map-extra into kbd-model-map.legacy. - Add kbd-model-map-extra file which contains the additional maps needed by YaST. - Drop localfs.service: unused and not needed anymore. ----------------------------------------- Patch: SUSE-2016-1827 Released: Thu Dec 15 12:41:10 2016 Summary: Security update for pcre Severity: moderate References: 906574,924960,933288,933878,936227,942865,957566,957567,957598,957600,960837,971741,972127,CVE-2014-8964,CVE-2015-2325,CVE-2015-2327,CVE-2015-2328,CVE-2015-3210,CVE-2015-3217,CVE-2015-5073,CVE-2015-8380,CVE-2015-8381,CVE-2015-8382,CVE-2015-8383,CVE-2015-8384,CVE-2015-8385,CVE-2015-8386,CVE-2015-8387,CVE-2015-8388,CVE-2015-8389,CVE-2015-8390,CVE-2015-8391,CVE-2015-8392,CVE-2015-8393,CVE-2015-8394,CVE-2015-8395,CVE-2016-1283,CVE-2016-3191 Description: This update for pcre to version 8.39 (bsc#972127) fixes several issues. If you use pcre extensively please be aware that this is an update to a new version. Please make sure that your software works with the updated version. This version fixes a number of vulnerabilities that affect pcre and applications using the libary when accepting untrusted input as regular expressions or as part thereof. Remote attackers could have caused the application to crash, disclose information or potentially execute arbitrary code. These security issues were fixed: - CVE-2014-8964: Heap-based buffer overflow in PCRE allowed remote attackers to cause a denial of service (crash) or have other unspecified impact via a crafted regular expression, related to an assertion that allows zero repeats (bsc#906574). - CVE-2015-2325: Heap buffer overflow in compile_branch() (bsc#924960). - CVE-2015-3210: Heap buffer overflow in pcre_compile2() / compile_regex() (bsc#933288) - CVE-2015-3217: PCRE Library Call Stack Overflow Vulnerability in match() (bsc#933878). - CVE-2015-5073: Library Heap Overflow Vulnerability in find_fixedlength() (bsc#936227). - bsc#942865: heap overflow in compile_regex() - CVE-2015-8380: The pcre_exec function in pcre_exec.c mishandled a // pattern with a \01 string, which allowed remote attackers to cause a denial of service (heap-based buffer overflow) or possibly have unspecified other impact via a crafted regular expression, as demonstrated by a JavaScript RegExp object encountered by Konqueror (bsc#957566). - CVE-2015-2327: PCRE mishandled certain patterns with internal recursive back references, which allowed remote attackers to cause a denial of service (segmentation fault) or possibly have unspecified other impact via a crafted regular expression, as demonstrated by a JavaScript RegExp object encountered by Konqueror (bsc#957567). - bsc#957598: Various security issues - CVE-2015-8381: Heap Overflow in compile_regex() (bsc#957598). - CVE-2015-8382: Regular Expression Uninitialized Pointer Information Disclosure Vulnerability (ZDI-CAN-2547)(bsc#957598). - CVE-2015-8383: Buffer overflow caused by repeated conditional group(bsc#957598). - CVE-2015-8384: Buffer overflow caused by recursive back reference by name within certain group(bsc#957598). - CVE-2015-8385: Buffer overflow caused by forward reference by name to certain group(bsc#957598). - CVE-2015-8386: Buffer overflow caused by lookbehind assertion(bsc#957598). - CVE-2015-8387: Integer overflow in subroutine calls(bsc#957598). - CVE-2015-8388: Buffer overflow caused by certain patterns with an unmatched closing parenthesis(bsc#957598). - CVE-2015-8389: Infinite recursion in JIT compiler when processing certain patterns(bsc#957598). - CVE-2015-8390: Reading from uninitialized memory when processing certain patterns(bsc#957598). - CVE-2015-8391: Some pathological patterns causes pcre_compile() to run for a very long time(bsc#957598). - CVE-2015-8392: Buffer overflow caused by certain patterns with duplicated named groups(bsc#957598). - CVE-2015-8393: Information leak when running pcgrep -q on crafted binary(bsc#957598). - CVE-2015-8394: Integer overflow caused by missing check for certain conditions(bsc#957598). - CVE-2015-8395: Buffer overflow caused by certain references(bsc#957598). - CVE-2015-2328: PCRE mishandled the /((?(R)a|(?1)))+/ pattern and related patterns with certain recursion, which allowed remote attackers to cause a denial of service (segmentation fault) or possibly have unspecified other impact via a crafted regular expression (bsc#957600). - CVE-2016-1283: The pcre_compile2 function in pcre_compile.c in PCRE mishandled certain patterns with named subgroups, which allowed remote attackers to cause a denial of service (heap-based buffer overflow) or possibly have unspecified other impact via a crafted regular expression (bsc#960837). - CVE-2016-3191: The compile_branch function in pcre_compile.c in pcre2_compile.c mishandled patterns containing an (*ACCEPT) substring in conjunction with nested parentheses, which allowed remote attackers to execute arbitrary code or cause a denial of service (stack-based buffer overflow) via a crafted regular expression (bsc#971741). These non-security issues were fixed: - JIT compiler improvements - performance improvements - The Unicode data tables have been updated to Unicode 7.0.0. ----------------------------------------- Patch: SUSE-2016-1841 Released: Fri Dec 16 14:57:16 2016 Summary: Recommended update for suse-build-key Severity: moderate References: 1014151 Description: This update for suse-build-key extends the lifetime of the build@suse.de GPG key that is signing the SUSE Linux Enterprise 12 repositories. (bsc#1014151) UID: pub 2048R/39DB7C82 2013-01-31 [expires: 2020-12-06] uid SuSE Package Signing Key ----------------------------------------- Patch: SUSE-2016-1863 Released: Wed Dec 21 10:41:35 2016 Summary: Recommended updated for pth Severity: low References: 1013286 Description: This update adds the 32bit version of libpth20 to SUSE Linux Enterprise 12 SP1 and 12 SP2. ----------------------------------------- Patch: SUSE-2017-6 Released: Tue Jan 3 15:01:58 2017 Summary: Recommended update for systemd Severity: moderate References: 1012390,1012591,1012818,1013989,1015515,909418,912715,945340,953807,963290,990538 Description: This update for systemd fixes the following issues: - core: Make mount units from /proc/self/mountinfo possibly bind to a device. Fixes unmounting issues when ejecting CDs or DVDs. (bsc#909418, bsc#912715, bsc#945340) - fstab-generator: Remove bogus condition that leads to warnings on boot. (bsc#1013989) - coredumpctl: Let gdb handle the SIGINT signal. (bsc#1012591) - Ship kbd-model-map with the correct contents. (bsc#1015515) - rules: Set SYSTEMD_READY=0 on DM_UDEV_DISABLE_OTHER_RULES_FLAG=1 only with ADD event. (bsc#963290, bsc#990538) - tmpfiles: Don't skip path_set_perms on error. (bsc#953807) - nspawn: Properly handle image/directory paths that are symbolic links. (bsc#1012390) - systemctl: Fix 'is-enabled' exit status on failure when executed in chroot. (bsc#1012818) ----------------------------------------- Patch: SUSE-2017-32 Released: Mon Jan 9 11:50:42 2017 Summary: Recommended update for dirmngr Severity: low References: 994794 Description: This update for dirmngr enables support for daemon mode. ----------------------------------------- Patch: SUSE-2017-47 Released: Wed Jan 11 11:42:43 2017 Summary: Recommended update for systemd Severity: important References: 1018214,1018399 Description: This update for systemd fixes the following two issues: - A regression in the previous update (SUSE-RU-2017:0013-1, bsc#909418) could have caused systemd to freeze. (bsc#1018399) - Warnings emitted when udev socket units are restarted during package upgrade were silenced. (bsc#1018214) ----------------------------------------- Patch: SUSE-2017-149 Released: Wed Jan 25 09:17:08 2017 Summary: Security update for systemd Severity: important References: 1012266,1014560,1014566,1020601,997682,CVE-2016-10156 Description: This update for systemd fixes the following issues: This security issue was fixed: - CVE-2016-10156: Fix permissions set on permanent timer timestamp files, preventing local unprivileged users from escalating privileges (bsc#1020601). These non-security issues were fixed: - Fix permission set on /var/lib/systemd/linger/* - install: follow config_path symlink (#3362) - install: fix disable when /etc/systemd/system is a symlink (bsc#1014560) - run: make --slice= work in conjunction with --scope (bsc#1014566) - core: don't dispatch load queue when setting Slice= for transient units - systemctl: remove duplicate entries showed by list-dependencies (#5049) (bsc#1012266) - rule: don't automatically online standby memory on s390x (bsc#997682) ----------------------------------------- Patch: SUSE-2017-185 Released: Thu Feb 2 18:22:37 2017 Summary: Security update for cpio Severity: moderate References: 1020108,963448,CVE-2016-2037 Description: This update for cpio fixes two issues. This security issue was fixed: - CVE-2016-2037: The cpio_safer_name_suffix function in util.c in cpio allowed remote attackers to cause a denial of service (out-of-bounds write) via a crafted cpio file (bsc#963448). This non-security issue was fixed: - bsc#1020108: Always use 32 bit CRC to prevent checksum errors for files greater than 32MB ----------------------------------------- Patch: SUSE-2017-192 Released: Fri Feb 3 18:46:05 2017 Summary: Security update for libxml2 Severity: moderate References: 1005544,1010675,1013930,1014873,1017497,CVE-2016-4658,CVE-2016-9318,CVE-2016-9597 Description: This update for libxml2 fixes the following issues: * CVE-2016-4658: use-after-free error could lead to crash [bsc#1005544] * Fix NULL dereference in xpointer.c when in recovery mode [bsc#1014873] * CVE-2016-9597: An XML document with many opening tags could have caused a overflow of the stack not detected by the recursion limits, allowing for DoS (bsc#1017497). For CVE-2016-9318 we decided not to ship a fix since it can break existing setups. Please take appropriate actions if you parse untrusted XML files and use the new -noxxe flag if possible (bnc#1010675, bnc#1013930). ----------------------------------------- Patch: SUSE-2017-212 Released: Wed Feb 8 13:07:24 2017 Summary: Security update for expat Severity: moderate References: 983215,983216,CVE-2012-6702,CVE-2016-5300 Description: This update for expat fixes the following security issues: - CVE-2012-6702: Expat, when used in a parser that has not called XML_SetHashSalt or passed it a seed of 0, made it easier for context-dependent attackers to defeat cryptographic protection mechanisms via vectors involving use of the srand function. (bsc#983215) - CVE-2016-5300: The XML parser in Expat did not use sufficient entropy for hash initialization, which allowed context-dependent attackers to cause a denial of service (CPU consumption) via crafted identifiers in an XML document. NOTE: this vulnerability exists because of an incomplete fix for CVE-2012-0876. (bsc#983216) ----------------------------------------- Patch: SUSE-2017-261 Released: Mon Feb 20 11:00:28 2017 Summary: Recommended update for dirmngr Severity: low References: 1019276 Description: This update for dirmngr fixes the following issues: - Properly initialize the dirmngr tmpfilesd files right away and not just during reboot - Own the /usr/lib/tmpfiles.d/ folder as it is needed in older systemds wrt (bsc#1019276) - Proprely require logrotate as we need it for the dirmngr configs ----------------------------------------- Patch: SUSE-2017-389 Released: Thu Mar 16 14:16:43 2017 Summary: Recommended update for systemd Severity: moderate References: 1004094,1006687,1019470,1022014,1022047,1025598,995936 Description: This update for systemd provides the following fixes: - core: Fix memory leak in transient units. (bsc#1025598) - core: Destroy all name watching bus slots when we are kicked off the bus. (bsc#1006687) - sd-event: Fix incorrect assertion. (bsc#995936, bsc#1022014) - journald: Don't flush to /var/log/journal before we get asked to. (bsc#1004094) - core: Downgrade warning about duplicate device names. (bsc#1022047) - units: Remove no longer needed ldconfig service. (bsc#1019470) ----------------------------------------- Patch: SUSE-2017-439 Released: Tue Mar 21 10:48:47 2017 Summary: Recommended update for netcfg Severity: low References: 1028305,959693 Description: This update for netcfg provides the following fixes: - Update script to generate services to use UTF8 by default. (bsc#1028305) - Repack services.bz2 with latest from upstream and adjust the script to not add all the names and emails at the bottom of the file. (bsc#959693) ----------------------------------------- Patch: SUSE-2017-580 Released: Wed Apr 12 23:58:47 2017 Summary: Recommended update for cpio Severity: important References: 1028410 Description: This update for cpio fixes the following issues: - A regression caused cpio to crash for tar and ustar archive types [bsc#1028410] ----------------------------------------- Patch: SUSE-2017-732 Released: Wed May 10 14:03:43 2017 Summary: Recommended update for procps Severity: low References: 1030621 Description: This update for procps fixes the following issues: - Command w(1) with option -n doesn't work. (bsc#1030621) ----------------------------------------- Patch: SUSE-2017-735 Released: Wed May 10 15:43:46 2017 Summary: Recommended update for gpg2 Severity: low References: 1036736,986783 Description: This update for gpg2 provides the following fixes: - Do not install CAcert and other root certificates which are not needed with Let's Encrypt. (bsc#1036736) - Initialize the trustdb before import attempt. (bsc#986783) ----------------------------------------- Patch: SUSE-2017-751 Released: Thu May 11 17:14:30 2017 Summary: Recommended update for systemd Severity: moderate References: 1010220,1025398,1025886,1028263,1028610,1029183,1029691,1030290,1031355,1032538,1032660,1033855,1034565,955770 Description: This update for systemd provides the following fixes: - logind: Update empty and 'infinity' handling for [User]TasksMax. (bsc#1031355) - importd: Support SUSE style checksums. (fate#322054) - journal: Don't remove leading spaces. (bsc#1033855) - Make sure all swap units are ordered before the swap target. (bsc#955770, bsc#1034565) - hwdb: Fix warning 'atkbd serio0: Unknown key pressed'. (bsc#1010220) - logind: Restart logind on package update only on SLE12 distros. (bsc#1032660) - core: Treat masked files as 'unchanged'. (bsc#1032538) - units: Move Before deps for quota services to remote-fs.target. (bsc#1028263) - udev: Support predictable ifnames on vio buses. (bsc#1029183) - udev: Add a persistent rule for ibmvnic devices. (bsc#1029183) - units: Do not throw a warning in emergency mode if plymouth is not installed. (bsc#1025398) - core: Downgrade 'Time has been changed' message to debug level. (bsc#1028610) - vconsole: Don't do GIO_SCRNMAP / GIO_UNISCRNMAP. (bsc#1029691) - udev-rules: Perform whitespace replacement for symlink subst values. (bsc#1025886) - Consider chroot updates in fix-machines-subvol-for-rollbacks.sh. (bsc#1030290) ----------------------------------------- Patch: SUSE-2017-794 Released: Tue May 16 15:41:09 2017 Summary: Security update for bash Severity: moderate References: 1010845,1035371,CVE-2016-9401 Description: This update for bash fixes an issue that could lead to syntax errors when parsing scripts that use expr(1) inside loops. Additionally, the popd build-in now ensures that the normalized stack offset is within bounds before trying to free that stack entry. This fixes a segmentation fault. ----------------------------------------- Patch: SUSE-2017-865 Released: Wed May 24 16:23:20 2017 Summary: Security update for pam Severity: moderate References: 1015565,1037824,934920,CVE-2015-3238 Description: This update for pam fixes the following issues: - CVE-2015-3238: pam_unix in conjunction with SELinux allowed for DoS attacks (bsc#934920). - log a hint to syslog if /etc/nologin is present, but empty (bsc#1015565). - If /etc/nologin is present, but empty, log a hint to syslog. (bsc#1015565) - Added support for libowcrypt.so, if present, to configure support for BLOWFISH (bsc#1037824) ----------------------------------------- Patch: SUSE-2017-891 Released: Tue May 30 22:28:21 2017 Summary: Security update for libxml2 Severity: moderate References: 1039063,1039064,1039066,1039069,1039661,981114,CVE-2016-1839,CVE-2017-9047,CVE-2017-9048,CVE-2017-9049,CVE-2017-9050 Description: This update for libxml2 fixes the following issues: - CVE-2017-9047, CVE-2017-9048: The function xmlSnprintfElementContent in valid.c was vulnerable to a stack buffer overflow (bsc#1039063, bsc#1039064) - CVE-2017-9049: The function xmlDictComputeFastKey in dict.c was vulnerable to a heap-based buffer over-read. (bsc#1039066) - CVE-2017-9050: The function xmlDictAddString was vulnerable to a heap-based buffer over-read (bsc#1039661) - CVE-2016-1839: heap-based buffer overflow (xmlDictAddString func) (bnc#1039069) ----------------------------------------- Patch: SUSE-2017-907 Released: Thu Jun 1 14:23:36 2017 Summary: Recommended update for shadow Severity: low References: 1003978,1031643 Description: This update for shadow fixes the following issues: - Dynamically added users via pam_group are not listed in groups databases but are still valid. (bsc#1031643) - useradd(8) and groupadd(8) performance issue when using SSSD. Previously the entire possible UID/GID was iterated to find an available UID/GID. This could take long time over a network device. Instead, find available UID/GID locally, and then check only those values over network. (bsc#1003978) ----------------------------------------- Patch: SUSE-2017-918 Released: Tue Jun 6 12:35:44 2017 Summary: Recommended update for libsemanage, selinux-policy Severity: moderate References: 1020143,1032445,1035818,1038189 Description: This update for libsemanage, selinux-policy fixes the following issues: - Limit to policy version 29 by default. - Fix policy module build failures and wrong policy path on SLE 12 SP2 (bsc#1038189, bsc#1035818, bsc#1020143, bsc#1032445) ----------------------------------------- Patch: SUSE-2017-939 Released: Mon Jun 12 10:56:22 2017 Summary: Security update for libxml2 Severity: moderate References: 1039063,1039064,1039066,1039069,1039661,CVE-2017-9047,CVE-2017-9048,CVE-2017-9049,CVE-2017-9050 Description: This update for libxml2 fixes the following security issues: * CVE-2017-9050: A heap-based buffer over-read in xmlDictAddString (bsc#1039069, bsc#1039661) * CVE-2017-9049: A heap-based buffer overflow in xmlDictComputeFastKey (bsc#1039066) * CVE-2017-9048: A stack overflow vulnerability in xmlSnprintfElementContent (bsc#1039063) * CVE-2017-9047: A stack overflow vulnerability in xmlSnprintfElementContent (bsc#1039064) ----------------------------------------- Patch: SUSE-2017-959 Released: Wed Jun 14 14:38:11 2017 Summary: Recommended update for gcc5 Severity: low References: 1043580 Description: This update for gcc5 fixes the version of libffi in its pkg-config configuration file. ----------------------------------------- Patch: SUSE-2017-962 Released: Wed Jun 14 16:33:07 2017 Summary: Security update for openldap2 Severity: moderate References: 1009470,1037396,1041764,972331,CVE-2017-9287 Description: This update for openldap2 fixes the following issues: Security issues fixed: - CVE-2017-9287: A double free vulnerability in the mdb backend during search with page size 0 was fixed (bsc#1041764) Non security bugs fixed: - Let OpenLDAP read system-wide certificates by default and don't hide the error if the user-specified CA location cannot be read. (bsc#1009470) - Fix an uninitialised variable that causes startup failure (bsc#1037396) - Fix an issue with transaction management that can cause server crash (bsc#972331) ----------------------------------------- Patch: SUSE-2017-985 Released: Mon Jun 19 14:57:41 2017 Summary: Security update for libgcrypt Severity: moderate References: 1042326,931932,CVE-2017-9526 Description: This update for libgcrypt fixes the following issues: - CVE-2017-9526: Store the session key in secure memory to ensure that constant time point operations are used in the MPI library. (bsc#1042326) - Don't require secure memory for the fips selftests, this prevents the 'Oops, secure memory pool already initialized' warning. (bsc#931932) ----------------------------------------- Patch: SUSE-2017-1036 Released: Mon Jun 26 08:12:24 2017 Summary: Security update for libxml2 Severity: moderate References: 1024989,1044337,CVE-2017-0663,CVE-2017-5969 Description: This update for libxml2 fixes the following issues: Security issues fixed: * CVE-2017-0663: Fixed a heap buffer overflow in xmlAddID (bsc#1044337) * CVE-2017-5969: Fixed a NULL pointer deref in xmlDumpElementContent (bsc#1024989) ----------------------------------------- Patch: SUSE-2017-1040 Released: Mon Jun 26 13:22:26 2017 Summary: Recommended update for libsemanage, policycoreutils Severity: low References: 1043237 Description: This update for libsemanage, policycoreutils fixes the following issue: - Show version numbers of modules where they are available (bsc#1043237) ----------------------------------------- Patch: SUSE-2017-1082 Released: Fri Jun 30 10:54:06 2017 Summary: Recommended update for dirmngr Severity: low References: 1045943 Description: This update for dirmngr provides the following fix: - Change logrotate from Requires to Recommends (bsc#1045943) ----------------------------------------- Patch: SUSE-2017-1086 Released: Fri Jun 30 15:36:17 2017 Summary: Security update for libxml2 Severity: moderate References: 1044887,1044894,CVE-2017-7375,CVE-2017-7376 Description: This update for libxml2 fixes the following issues: Security issues fixed: * CVE-2017-7376: Increase buffer space for port in HTTP redirect support (bsc#1044887) * CVE-2017-7375: Prevent unwanted external entity reference [bsc#1044894, ] ----------------------------------------- Patch: SUSE-2017-1104 Released: Tue Jul 4 16:13:55 2017 Summary: Security update for systemd Severity: moderate References: 1004995,1029102,1029516,1036873,1038865,1040258,1040614,1040942,1043758,982303,CVE-2017-9217 Description: This update for systemd fixes the following issues: Security issue fixed: - CVE-2017-9217: resolved: Fix null pointer p->question dereferencing that could lead to resolved aborting (bsc#1040614) The update also fixed several non-security bugs: - core/mount: Use the '-c' flag to not canonicalize paths when calling /bin/umount - automount: Handle expire_tokens when the mount unit changes its state (bsc#1040942) - automount: Rework propagation between automount and mount units - build: Make sure tmpfiles.d/systemd-remote.conf get installed when necessary - build: Fix systemd-journal-upload installation - basic: Detect XEN Dom0 as no virtualization (bsc#1036873) - virt: Make sure some errors are not ignored - fstab-generator: Do not skip Before= ordering for noauto mountpoints - fstab-gen: Do not convert device timeout into seconds when initializing JobTimeoutSec - core/device: Use JobRunningTimeoutSec= for device units (bsc#1004995) - fstab-generator: Apply the _netdev option also to device units (bsc#1004995) - job: Add JobRunningTimeoutSec for JOB_RUNNING state (bsc#1004995) - job: Ensure JobRunningTimeoutSec= survives serialization (bsc#1004995) - rules: Export NVMe WWID udev attribute (bsc#1038865) - rules: Introduce disk/by-id (model_serial) symbolic links for NVMe drives - rules: Add rules for NVMe devices - sysusers: Make group shadow support configurable (bsc#1029516) - core: When deserializing a unit, fully restore its cgroup state (bsc#1029102) - core: Introduce cg_mask_from_string()/cg_mask_to_string() - core:execute: Fix handling failures of calling fork() in exec_spawn() (bsc#1040258) - Fix systemd-sysv-convert when a package starts shipping service units (bsc#982303) The database might be missing when upgrading a package which was shipping no sysv init scripts nor unit files (at the time --save was called) but the new version start shipping unit files. - Disable group shadow support (bsc#1029516) - Only check signature job error if signature job exists (bsc#1043758) ----------------------------------------- Patch: SUSE-2017-1116 Released: Thu Jul 6 11:37:18 2017 Summary: Security update for libgcrypt Severity: moderate References: 1046607,CVE-2017-7526 Description: This update for libgcrypt fixes the following issues: - CVE-2017-7526: Hardening against a local side-channel attack in RSA key handling has been added (bsc#1046607) ----------------------------------------- Patch: SUSE-2017-1119 Released: Fri Jul 7 11:23:20 2017 Summary: Recommended update for ncurses Severity: important References: 1000662,1046853,1046858,CVE-2017-10684,CVE-2017-10685 Description: This update for ncurses fixes the following issues: Security issues fixed: - CVE-2017-10684: Possible RCE via stack-based buffer overflow in the fmt_entry function. (bsc#1046858) - CVE-2017-10685: Possible RCE with format string vulnerability in the fmt_entry function. (bsc#1046853) Bugfixes: - Drop patch ncurses-5.9-environment.dif as YaST2 ncurses GUI does not need it anymore and as well as it causes bug bsc#1000662 ----------------------------------------- Patch: SUSE-2017-1160 Released: Fri Jul 14 17:20:26 2017 Summary: Recommended update for openldap2 Severity: low References: 1031702 Description: This update for openldap2 provides the following fix: - Fix a regression in handling of non-blocking connection (bsc#1031702) ----------------------------------------- Patch: SUSE-2017-1174 Released: Wed Jul 19 11:12:51 2017 Summary: Security update for systemd, dracut Severity: important References: 1032029,1033238,1037120,1040153,1040968,1043900,1045290,1046750,986216,CVE-2017-9445 Description: This update for systemd and dracut fixes the following issues: Security issues fixed: - CVE-2017-9445: Possible out-of-bounds write triggered by a specially crafted TCP payload from a DNS server. (bsc#1045290) Non-security issues fixed in systemd: - Automounter issue in combination with NFS volumes (bsc#1040968) - Missing symbolic link for SAS device in /dev/disk/by-path (bsc#1040153) - Add minimal support for boot.d/* scripts in systemd-sysv-convert (bsc#1046750) Non-security issues fixed in dracut: - Bail out if module directory does not exist. (bsc#1043900) - Suppress bogus error message. (bsc#1032029) - Fix module force loading with systemd. (bsc#986216) - Ship udev files required by systemd. (bsc#1040153) - Ignore module resolution errors (e.g. with kgraft). (bsc#1037120) ----------------------------------------- Patch: SUSE-2017-1222 Released: Wed Jul 26 17:15:18 2017 Summary: Recommended update for procps Severity: low References: 1034563,1039941 Description: This update for procps provides the following fixes: - Make pmap handle LazyFree in /proc/smaps (bsc#1034563) - Allow reading and writing content lines longer than 1024 characters under /proc/sys (bsc#1039941) - Avoid printing messages when /proc/sys/net/ipv6/conf/*/stable_secret is not set ----------------------------------------- Patch: SUSE-2017-1245 Released: Thu Aug 3 10:43:15 2017 Summary: Security update for systemd Severity: moderate References: 1004995,1029102,1029516,1032029,1033238,1036873,1037120,1038865,1040153,1040258,1040614,1040942,1040968,1043758,1043900,1045290,1046750,982303,986216,CVE-2017-9217,CVE-2017-9445 Description: This update for systemd provides several fixes and enhancements. Security issues fixed: - CVE-2017-9217: Null pointer dereferencing that could lead to resolved aborting. (bsc#1040614) - CVE-2017-9445: Possible out-of-bounds write triggered by a specially crafted TCP payload from a DNS server. (bsc#1045290) The update also fixed several non-security bugs: - core/mount: Use the '-c' flag to not canonicalize paths when calling /bin/umount - automount: Handle expire_tokens when the mount unit changes its state (bsc#1040942) - automount: Rework propagation between automount and mount units - build: Make sure tmpfiles.d/systemd-remote.conf get installed when necessary - build: Fix systemd-journal-upload installation - basic: Detect XEN Dom0 as no virtualization (bsc#1036873) - virt: Make sure some errors are not ignored - fstab-generator: Do not skip Before= ordering for noauto mountpoints - fstab-gen: Do not convert device timeout into seconds when initializing JobTimeoutSec - core/device: Use JobRunningTimeoutSec= for device units (bsc#1004995) - fstab-generator: Apply the _netdev option also to device units (bsc#1004995) - job: Add JobRunningTimeoutSec for JOB_RUNNING state (bsc#1004995) - job: Ensure JobRunningTimeoutSec= survives serialization (bsc#1004995) - rules: Export NVMe WWID udev attribute (bsc#1038865) - rules: Introduce disk/by-id (model_serial) symbolic links for NVMe drives - rules: Add rules for NVMe devices - sysusers: Make group shadow support configurable (bsc#1029516) - core: When deserializing a unit, fully restore its cgroup state (bsc#1029102) - core: Introduce cg_mask_from_string()/cg_mask_to_string() - core:execute: Fix handling failures of calling fork() in exec_spawn() (bsc#1040258) - Fix systemd-sysv-convert when a package starts shipping service units (bsc#982303) The database might be missing when upgrading a package which was shipping no sysv init scripts nor unit files (at the time --save was called) but the new version start shipping unit files. - Disable group shadow support (bsc#1029516) - Only check signature job error if signature job exists (bsc#1043758) - Automounter issue in combination with NFS volumes (bsc#1040968) - Missing symbolic link for SAS device in /dev/disk/by-path (bsc#1040153) - Add minimal support for boot.d/* scripts in systemd-sysv-convert (bsc#1046750) ----------------------------------------- Patch: SUSE-2017-1279 Released: Mon Aug 7 14:46:40 2017 Summary: Security update for ncurses Severity: moderate References: 1046853,1046858,1047964,1047965,1049344,CVE-2017-10684,CVE-2017-10685,CVE-2017-11112,CVE-2017-11113 Description: This update for ncurses fixes the following issues: Security issues fixed: - CVE-2017-11112: Illegal address access in append_acs. (bsc#1047964) - CVE-2017-11113: Dereferencing NULL pointer in _nc_parse_entry. (bsc#1047965) - CVE-2017-10684, CVE-2017-10685: Add modified upstream fix from ncurses 6.0 to avoid broken termcap format (bsc#1046853, bsc#1046858, bsc#1049344) ----------------------------------------- Patch: SUSE-2017-1316 Released: Thu Aug 10 13:54:27 2017 Summary: Recommended update for cyrus-sasl Severity: moderate References: 1014471,1026825,1044840,938657 Description: This update for cyrus-sasl provides the following fixes: - Fix SASL GSSAPI mechanism acceptor wrongly returns zero maxbufsize - Fix unknown authentication mechanism: kerberos5 (bsc#1026825) - Really use SASLAUTHD_PARAMS variable (bsc#938657) - Make sure /usr/sbin/rcsaslauthd exists - Add /usr/sbin/rcsaslauthd symbolic link to /usr/sbin/service (bsc#1014471) - Silence 'GSSAPI client step 1' debug log message (bsc#1044840) ----------------------------------------- Patch: SUSE-2017-1326 Released: Fri Aug 11 16:59:04 2017 Summary: Security update for libxml2 Severity: low References: 1038444,CVE-2017-8872 Description: This update for libxml2 fixes the following issues: Security issues fixed: - CVE-2017-8872: Out-of-bounds read in htmlParseTryOrFinish. (bsc#1038444) ----------------------------------------- Patch: SUSE-2017-1330 Released: Mon Aug 14 18:41:29 2017 Summary: Recommended update for sed Severity: low References: 954661 Description: This update for sed provides the following fixes: - Don't terminate with a segmentation fault if close of last file descriptor fails. (bsc#954661) ----------------------------------------- Patch: SUSE-2017-1333 Released: Tue Aug 15 17:59:30 2017 Summary: Optional update for libverto Severity: low References: 1029561 Description: This update adds the libverto library to OpenStack Cloud Magnum Orchestration channels. ----------------------------------------- Patch: SUSE-2017-1334 Released: Tue Aug 15 20:09:03 2017 Summary: Recommended update for systemd Severity: important References: 1048679,874665 Description: This update for systemd fixes the following issues: - compat-rules: Don't rely on ID_SERIAL when generating 'by-id' links for NVMe devices. (bsc#1048679) - fstab-generator: Handle NFS 'bg' mounts correctly. (bsc#874665, fate#323464) - timesyncd: Don't use compiled-in list if FallbackNTP has been configured explicitly. ----------------------------------------- Patch: SUSE-2017-1347 Released: Fri Aug 18 11:03:57 2017 Summary: Recommended update for procps Severity: important References: 1053409 Description: This update for procps fixes the following issues: - Fix a regression introduced in a previous update that would result in sysctl dying with a SIGSEGV error (bsc#1053409). ----------------------------------------- Patch: SUSE-2017-1349 Released: Fri Aug 18 12:31:07 2017 Summary: Recommended update for lua51 Severity: low References: 1051626 Description: This update for lua51 provides the following fixes: - Add Lua(API) and Lua(devel) symbols to fix building of lua51-luasocket. (bsc#1051626) ----------------------------------------- Patch: SUSE-2017-1390 Released: Fri Aug 25 15:14:27 2017 Summary: Security update for libzypp Severity: important References: 1009745,1036659,1038984,1043218,1045735,1046417,1047785,1048315,CVE-2017-7435,CVE-2017-7436,CVE-2017-9269 Description: The Software Update Stack was updated to receive fixes and enhancements. libzypp: - CVE-2017-7435, CVE-2017-7436, CVE-2017-9269: Fix GPG check workflows, mainly for unsigned repositories and packages. (bsc#1045735, bsc#1038984) - Fix gpg-pubkey release (creation time) computation. (bsc#1036659) - Update lsof blacklist. (bsc#1046417) - Re-probe on refresh if the repository type changes. (bsc#1048315) - Propagate proper error code to DownloadProgressReport. (bsc#1047785) - Allow to trigger an appdata refresh unconditionally. (bsc#1009745) - Support custom repo variables defined in /etc/zypp/vars.d. yast2-pkg-bindings: - Do not crash when the repository URL is not defined. (bsc#1043218) ----------------------------------------- Patch: SUSE-2017-1419 Released: Wed Aug 30 15:38:22 2017 Summary: Security update for expat Severity: moderate References: 1047236,1047240,CVE-2016-9063,CVE-2017-9233 Description: This update for expat fixes the following issues: - CVE-2016-9063: Possible integer overflow to fix inside XML_Parse leading to unexpected behaviour (bsc#1047240) - CVE-2017-9233: External Entity Vulnerability could lead to denial of service (bsc#1047236) ----------------------------------------- Patch: SUSE-2017-1439 Released: Fri Sep 1 15:31:05 2017 Summary: Recommended update for systemd Severity: important References: 1045384,1045987,1046268,1047379,1048605 Description: This update for systemd fixes the following issues: - Revert fix for bsc#1004995 which could have caused boot failure on LVM (bsc#1048605) - compat-rules: drop the bogus 'import everything' rule (bsc#1046268) - core: use an AF_UNIX/SOCK_DGRAM socket for cgroup agent notification (bsc#1045384 bsc#1047379) - udev/path_id: introduce support for NVMe devices (bsc#1045987) ----------------------------------------- Patch: SUSE-2017-1447 Released: Mon Sep 4 15:38:20 2017 Summary: Security update for libzypp, zypper Severity: important References: 1008325,1038984,1045735,1047785,1054088,1054671,1055920,CVE-2017-7436 Description: The Software Update Stack was updated to receive fixes and enhancements. libzypp: - Adapt to work with GnuPG 2.1.23. (bsc#1054088) - Support signing with subkeys. (bsc#1008325) - Enhance sort order for media.1/products. (bsc#1054671) zypper: - Also show a gpg key's subkeys. (bsc#1008325) - Improve signature check callback messages. (bsc#1045735) - Add options to tune the GPG check settings. (bsc#1045735) - Adapt download callback to report and handle unsigned packages. (bsc#1038984, CVE-2017-7436) - Report missing/optional files as 'not found' rather than 'error'. (bsc#1047785) ----------------------------------------- Patch: SUSE-2017-1450 Released: Mon Sep 4 16:36:07 2017 Summary: Recommended update for insserv-compat Severity: low References: 1035062,944903 Description: This update for insserv-compat fixes the following issues: - Add /etc/init.d hierarchy from former 'filesystem' package. (bsc#1035062) - Fix directory argument parsing. (bsc#944903) - Add perl(Getopt::Long) to list of requirements. ----------------------------------------- Patch: SUSE-2017-1453 Released: Mon Sep 4 21:23:50 2017 Summary: Recommended update for libgcrypt Severity: moderate References: 1043333,1046659,1047008 Description: This update for libgcrypt fixes the following issues: - libgcrypt stored an open file descriptor to the random device in a static variable between invocations. gnome-keyring-daemon on initialization reopened descriptors 0-2 with /dev/null which caused an infinite loop when libgcrypt attempted to read from the random device (bsc#1043333) - Avoid seeding the DRBG during FIPS power-up selftests (bsc#1046659) * don't call gcry_drbg_instantiate() in healthcheck sanity test to save entropy * turn off blinding for RSA decryption in selftests_rsa to avoid allocation of a random integer - fix a bug in gcry_drbg_healthcheck_sanity() which caused skipping some of the tests (bsc#1046659) - dlsym returns PLT address on s390x, dlopen libgcrypt20.so before calling dlsym (bsc#1047008) ----------------------------------------- Patch: SUSE-2017-1644 Released: Mon Oct 9 07:52:24 2017 Summary: Security update for krb5 Severity: moderate References: 1032680,1054028,1056995,903543,CVE-2017-11462 Description: This update for krb5 fixes several issues. This security issue was fixed: - CVE-2017-11462: Prevent automatic security context deletion to prevent double-free (bsc#1056995) These non-security issues were fixed: - Set 'rdns' and 'dns_canonicalize_hostname' to false in krb5.conf in order to improve client security in handling service principle names. (bsc#1054028) - Prevent kadmind.service startup failure caused by absence of LDAP service. (bsc#903543) - Remove main package's dependency on systemd (bsc#1032680) ----------------------------------------- Patch: SUSE-2017-1796 Released: Fri Oct 27 21:25:06 2017 Summary: Recommended update for pcre Severity: moderate References: 1058722 Description: This update for pcre fixes the following issues: - Fixed the pcre stack frame size detection because modern compilers break it due to cloning and inlining pcre match() function (bsc#1058722) ----------------------------------------- Patch: SUSE-2017-1826 Released: Wed Nov 8 08:47:17 2017 Summary: Security update for krb5 Severity: important References: 1065274,CVE-2017-15088 Description: This update for krb5 fixes the following issues: Security issues fixed: - CVE-2017-15088: A buffer overflow in get_matching_data() was fixed that could under specific circumstances be used to execute code (bsc#1065274) ----------------------------------------- Patch: SUSE-2017-1829 Released: Wed Nov 8 08:50:00 2017 Summary: Security update for shadow Severity: moderate References: 1023895,1052261,980486,CVE-2017-12424 Description: This update for shadow fixes several issues. This security issue was fixed: - CVE-2017-12424: The newusers tool could have been forced to manipulate internal data structures in ways unintended by the authors. Malformed input may have lead to crashes (with a buffer overflow or other memory corruption) or other unspecified behaviors (bsc#1052261). These non-security issues were fixed: - bsc#1023895: Fixed man page to not contain invalid options and also prevent warnings when using these options in certain settings - bsc#980486: Reset user in /var/log/tallylog because of the usage of pam_tally2 ----------------------------------------- Patch: SUSE-2017-1881 Released: Wed Nov 22 16:29:58 2017 Summary: Security update for file Severity: moderate References: 1009966,1063269,910252,910253,913650,913651,917152,996511,CVE-2014-8116,CVE-2014-8117,CVE-2014-9620,CVE-2014-9621,CVE-2014-9653 Description: The GNU file utility was updated to version 5.22. Security issues fixed: - CVE-2014-9621: The ELF parser in file allowed remote attackers to cause a denial of service via a long string. (bsc#913650) - CVE-2014-9620: The ELF parser in file allowed remote attackers to cause a denial of service via a large number of notes. (bsc#913651) - CVE-2014-9653: readelf.c in file did not consider that pread calls sometimes read only a subset of the available data, which allows remote attackers to cause a denial of service (uninitialized memory access) or possibly have unspecified other impact via a crafted ELF file. (bsc#917152) - CVE-2014-8116: The ELF parser (readelf.c) in file allowed remote attackers to cause a denial of service (CPU consumption or crash) via a large number of (1) program or (2) section headers or (3) invalid capabilities. (bsc#910253) - CVE-2014-8117: softmagic.c in file did not properly limit recursion, which allowed remote attackers to cause a denial of service (CPU consumption or crash) via unspecified vectors. (bsc#910253) Version update to file version 5.22 * add indirect relative for TIFF/Exif * restructure elf note printing to avoid repeated messages * add note limit, suggested by Alexander Cherepanov * Bail out on partial pread()'s (Alexander Cherepanov) * Fix incorrect bounds check in file_printable (Alexander Cherepanov) * PR/405: ignore SIGPIPE from uncompress programs * change printable -> file_printable and use it in more places for safety * in ELF, instead of '(uses dynamic libraries)' when PT_INTERP is present print the interpreter name. Version update to file version 5.21 * there was an incorrect free in magic_load_buffers() * there was an out of bounds read for some pascal strings * there was a memory leak in magic lists * don't interpret strings printed from files using the current locale, convert them to ascii format first. * there was an out of bounds read in elf note reads Update to file version 5.20 * recognize encrypted CDF documents * add magic_load_buffers from Brooks Davis * add thumbs.db support Additional non-security bug fixes: * Fixed a memory corruption during rpmbuild (bsc#1063269) * Backport of a fix for an increased printable string length as found in file 5.30 (bsc#996511) * file command throws 'Composite Document File V2 Document, corrupt: Can't read SSAT' error against excel 97/2003 file format. (bsc#1009966) ----------------------------------------- Patch: SUSE-2017-1903 Released: Fri Nov 24 16:19:37 2017 Summary: Security update for perl Severity: moderate References: 1047178,1057721,1057724,999735,CVE-2017-12837,CVE-2017-12883,CVE-2017-6512 Description: This update for perl fixes the following issues: Security issues fixed: - CVE-2017-12837: Heap-based buffer overflow in the S_regatom function in regcomp.c in Perl 5 before 5.24.3-RC1 and 5.26.x before 5.26.1-RC1 allows remote attackers to cause a denial of service (out-of-bounds write) via a regular expression with a '\N{}' escape and the case-insensitive modifier. (bnc#1057724) - CVE-2017-12883: Buffer overflow in the S_grok_bslash_N function in regcomp.c in Perl 5 before 5.24.3-RC1 and 5.26.x before 5.26.1-RC1 allows remote attackers to disclose sensitive information or cause a denial of service (application crash) via a crafted regular expression with an invalid '\N{U+...}' escape. (bnc#1057721) - CVE-2017-6512: Race condition in the rmtree and remove_tree functions in the File-Path module before 2.13 for Perl allows attackers to set the mode on arbitrary files via vectors involving directory-permission loosening logic. (bnc#1047178) Bug fixes: - backport set_capture_string changes from upstream (bsc#999735) - reformat baselibs.conf as source validator workaround ----------------------------------------- Patch: SUSE-2017-1916 Released: Fri Nov 24 20:15:01 2017 Summary: Recommended update for libgcrypt Severity: important References: 1043333,1059723 Description: This update for libgcrypt provides the following fix: - Fix a regression in a previous update which caused libgcrypt to leak file descriptors causing failures when starting rtkit-daemon. (bsc#1059723) ----------------------------------------- Patch: SUSE-2017-1917 Released: Mon Nov 27 13:32:07 2017 Summary: Optional update for gcc7 Severity: low References: 1056437,1062591,1062592 Description: The GNU Compiler GCC 7 is being added to the Toolchain Module by this update. New features: - Support for specific IBM Power9 processor instructions. - Support for specific IBM zSeries z14 processor instructions. - New packages cross-npvtx-gcc7 and nvptx-tools added to the Toolchain Module for specific NVIDIA Card offload support. The update also supplies gcc7 compatible libstdc++, libgcc_s1 and other gcc derived libraries for the base products of SUSE Linux Enterprise 12. Various optimizers have been improved in GCC 7, several of bugs fixed, quite some new warnings added and the error pin-pointing and fix-suggestions have been greatly improved. The GNU Compiler page for GCC 7 contains a summary of all the changes that have happened: https://gcc.gnu.org/gcc-7/changes.html ----------------------------------------- Patch: SUSE-2017-1965 Released: Thu Nov 30 12:48:45 2017 Summary: Recommended update for libsolv, libzypp, zypper Severity: moderate References: 1047233,1053671,1057188,1057634,1058695,1058783,1059065,1061384,1062561,1064999,661410 Description: The Software Update Stack was updated to receive fixes and enhancements. libsolv: - Many fixes and improvements for cleandeps. - Always create dup rules for 'distupgrade' jobs. - Use recommends also for ordering packages. - Fix splitprovides handling with addalreadyrecommended turned off. (bsc#1059065) - Expose solver_get_recommendations() in bindings. - Fix bug in solver_prune_to_highest_prio_per_name resulting in bad output from solver_get_recommendations(). - Support 'without' and 'unless' dependencies. - Use same heuristic as upstream to determine source RPMs. - Fix memory leak in bindings. - Add pool_best_solvables() function. - Fix 64bit integer parsing from RPM headers. - Enable bzip2 and xz/lzma compression support. - Enable complex/rich dependencies on distributions with RPM 4.13+. libzypp: - Fix media handling in presence of a repo path prefix. (bsc#1062561) - Fix RepoProvideFile ignoring a repo path prefix. (bsc#1062561) - Remove unused legacy notify-message script. (bsc#1058783) - Support multiple product licenses in repomd. (fate#322276) - Propagate 'rpm --import' errors. (bsc#1057188) - Fix typos in zypp.conf. zypper: - Locale: Fix possible segmentation fault. (bsc#1064999) - Add summary hint if product is better updated by a different command. This is mainly used by rolling distributions like openSUSE Tumbleweed to remind their users to use 'zypper dup' to update (not zypper up or patch). (bsc#1061384) - Unify '(add|modify)(repo|service)' property related arguments. - Fixed 'add' commands supporting to set only a subset of properties. - Introduced '-f/-F' as preferred short option for --[no-]refresh in all four commands. (bsc#661410, bsc#1053671) - Fix missing package names in installation report. (bsc#1058695) - Differ between unsupported and packages with unknown support status. (bsc#1057634) - Return error code '107' if an RPM's %post configuration script fails, but only if ZYPPER_ON_CODE12_RETURN_107=1 is set in the environment. (bsc#1047233) ----------------------------------------- Patch: SUSE-2017-1966 Released: Thu Nov 30 13:45:24 2017 Summary: Recommended update for systemd Severity: moderate References: 1004995,1035386,1039099,1040800,1045472,1048605,1050152,1053137,1053595,1055641,1063249 Description: This update for systemd fixes the following issues: - unit: When JobTimeoutSec= is turned off, implicitly turn off JobRunningTimeoutSec= too. (bsc#1048605, bsc#1004995) - compat-rules: Generate compat by-id symlinks with 'nvme' prefix missing and warn users that have broken symlinks. (bsc#1063249) - compat-rules: Allow to specify the generation number through the kernel command line. - scsi_id: Fixup prefix for pre-SPC inquiry reply. (bsc#1039099) - tmpfiles: Remove old ICE and X11 sockets at boot. - tmpfiles: Silently ignore any path that passes through autofs. (bsc#1045472) - pam_logind: Skip leading /dev/ from PAM_TTY field before passing it on. - shared/machine-pool: Fix another mkfs.btrfs checking. (bsc#1053595) - shutdown: Fix incorrect fscanf() result check. - shutdown: Don't remount,ro network filesystems. (bsc#1035386) - shutdown: Don't be fooled when detaching DM devices with BTRFS. (bsc#1055641) - bash-completion: Add support for --now. (bsc#1053137) - Add convert-lib-udev-path.sh script to convert /lib/udev directory into a symlink pointing to /usr/lib/udev when upgrading from SLE11. (bsc#1050152) - Add a rule to teach hotplug to offline containers transparently. (bsc#1040800) ----------------------------------------- Patch: SUSE-2017-1968 Released: Thu Nov 30 19:49:33 2017 Summary: Recommended update for coreutils Severity: low References: 1026567,1043059,965780 Description: This update for coreutils provides the following fixes: - Fix df(1) to no longer interact with excluded file system types, so for example specifying -x nfs no longer hangs with problematic nfs mounts. (bsc#1026567) - Ensure df -l no longer interacts with dummy file system types, so for example no longer hangs with problematic NFS mounted via system.automount(5). (bsc#1043059) - Significantly speed up df(1) for huge mount lists. (bsc#965780) ----------------------------------------- Patch: SUSE-2017-2021 Released: Fri Dec 8 10:11:04 2017 Summary: Recommended update for file Severity: moderate References: 1070878,1070958 Description: This update for file fixes detection of JPEG files. ----------------------------------------- Patch: SUSE-2018-4 Released: Tue Jan 2 15:58:20 2018 Summary: Recommended update for libzypp, zypper Severity: moderate References: 1057640,1067605,1068708,1071466,969569 Description: The Software Update Stack was updated to receive fixes and enhancements. libzypp: - Don't store duplicated locks. (bsc#969569) - Fix default for solver.allowNameChange. (bsc#1071466) - Don't filter procs with a different mnt namespace. (bsc#1068708) - Support repo variables in an URIs host:port component. (bsc#1057640, bsc#1067605) zypper: - Update manpage regarding custom repository variable fixes. (bsc#1057640, bsc#1067605) ----------------------------------------- Patch: SUSE-2018-86 Released: Wed Jan 17 09:38:17 2018 Summary: Security update for ncurses Severity: moderate References: 1056127,1056128,1056129,1056131,1056132,1056136,CVE-2017-13728,CVE-2017-13729,CVE-2017-13730,CVE-2017-13731,CVE-2017-13732,CVE-2017-13733 Description: This update for ncurses fixes the following issues: Security issues fixed: - CVE-2017-13728: Fix infinite loop in the next_char function in comp_scan.c (bsc#1056136). - CVE-2017-13730: Fix illegal address access in the function _nc_read_entry_source() (bsc#1056131). - CVE-2017-13733: Fix illegal address access in the fmt_entry function (bsc#1056127). - CVE-2017-13729: Fix illegal address access in the _nc_save_str (bsc#1056132). - CVE-2017-13732: Fix illegal address access in the function dump_uses() (bsc#1056128). - CVE-2017-13731: Fix illegal address access in the function postprocess_termcap() (bsc#1056129). ----------------------------------------- Patch: SUSE-2018-146 Released: Thu Jan 25 11:44:23 2018 Summary: Recommended update for openldap2 Severity: moderate References: 1064397,1065083 Description: This update for openldap2 provides the following fixes: - Fix a leak of sockets in case of unsuccessful connection attempts. (bsc#1065083) - Fix a crash that would happen under heavy load when using back-relay. (bsc#1064397) ----------------------------------------- Patch: SUSE-2018-209 Released: Tue Jan 30 10:53:43 2018 Summary: Security update for ncurses Severity: moderate References: 1056126,1056127,1056128,1056129,1056131,1056132,1056136,CVE-2017-13728,CVE-2017-13729,CVE-2017-13730,CVE-2017-13731,CVE-2017-13732,CVE-2017-13733,CVE-2017-13734 Description: This update for ncurses fixes several issues. These security issues were fixed: - CVE-2017-13734: Prevent illegal address access in the _nc_safe_strcat function in strings.c that might have lead to a remote denial of service attack (bsc#1056126). - CVE-2017-13733: Prevent illegal address access in the fmt_entry function in progs/dump_entry.c that might have lead to a remote denial of service attack (bsc#1056127). - CVE-2017-13732: Prevent illegal address access in the function dump_uses() in progs/dump_entry.c that might have lead to a remote denial of service attack (bsc#1056128). - CVE-2017-13731: Prevent illegal address access in the function postprocess_termcap() in parse_entry.c that might have lead to a remote denial of service attack (bsc#1056129). - CVE-2017-13730: Prevent illegal address access in the function _nc_read_entry_source() in progs/tic.c that might have lead to a remote denial of service attack (bsc#1056131). - CVE-2017-13729: Prevent illegal address access in the _nc_save_str function in alloc_entry.c that might have lead to a remote denial of service attack (bsc#1056132). - CVE-2017-13728: Prevent infinite loop in the next_char function in comp_scan.c that might have lead to a remote denial of service attack (bsc#1056136). ----------------------------------------- Patch: SUSE-2018-213 Released: Tue Jan 30 14:36:40 2018 Summary: Security update for systemd Severity: moderate References: 1048510,1065276,1066156,1068251,1070428,1071558,1074254,1075724,1076308,897422,CVE-2017-15908,CVE-2018-1049 Description: This update for systemd fixes several issues. This security issue was fixed: - CVE-2018-1049: Prevent race that can lead to DoS when using automounts (bsc#1076308). These non-security issues were fixed: - core: don't choke if a unit another unit triggers vanishes during reload - delta: don't ignore PREFIX when the given argument is PREFIX/SUFFIX - delta: extend skip logic to work on full directory paths (prefix+suffix) (bsc#1070428) - delta: check if a prefix needs to be skipped only once - delta: skip symlink paths when split-usr is enabled (#4591) - sysctl: use raw file descriptor in sysctl_write (#7753) - sd-netlink: don't take possesion of netlink fd from caller on failure (bsc#1074254) - Fix the regexp used to detect broken by-id symlinks in /etc/crypttab It was missing the following case: '/dev/disk/by-id/cr_-xxx'. - sysctl: disable buffer while writing to /proc (bsc#1071558) - Use read_line() and LONG_LINE_MAX to read values configuration files. (bsc#1071558) - sysctl: no need to check for eof twice - def: add new constant LONG_LINE_MAX - fileio: add new helper call read_line() as bounded getline() replacement - service: Don't stop unneeded units needed by restarted service (#7526) (bsc#1066156) - gpt-auto-generator: fix the handling of the value returned by fstab_has_fstype() in add_swap() (#6280) - gpt-auto-generator: disable gpt auto logic for swaps if at least one is defined in fstab (bsc#897422) - fstab-util: introduce fstab_has_fstype() helper - fstab-generator: ignore root=/dev/nfs (#3591) - fstab-generator: don't process root= if it happens to be 'gpt-auto' (#3452) - virt: use XENFEAT_dom0 to detect the hardware domain (#6442, #6662) (#7581) (bsc#1048510) - analyze: replace --no-man with --man=no in the man page (bsc#1068251) - udev: net_setup_link: don't error out when we couldn't apply link config (#7328) - Add missing /etc/systemd/network directory - Fix parsing of features in detect_vm_xen_dom0 (#7890) (bsc#1048510) - sd-bus: use -- when passing arguments to ssh (#6706) - systemctl: make sure we terminate the bus connection first, and then close the pager (#3550) - sd-bus: bump message queue size (bsc#1075724) - tmpfiles: downgrade warning about duplicate line ----------------------------------------- Patch: SUSE-2018-214 Released: Tue Jan 30 14:37:42 2018 Summary: Security update for libtasn1 Severity: moderate References: 1076832,CVE-2018-6003 Description: This update for libtasn1 fixes one issue. This security issue was fixed: - CVE-2018-6003: Prevent a stack exhaustion in _asn1_decode_simple_ber (lib/decoding.c) when decoding BER encoded structure allowed for DoS (bsc#1076832). ----------------------------------------- Patch: SUSE-2018-265 Released: Tue Feb 6 14:58:28 2018 Summary: Recommended update for ca-certificates-mozilla Severity: moderate References: 1010996,1071152,1071390 Description: This update for ca-certificates-mozilla fixes the following issues: The system SSL root certificate store was updated to Mozilla certificate version 2.22 from January 2018. (bsc#1071152 bsc#1071390 bsc#1010996) We removed the old 1024 bit legacy CAs that were temporary left in to allow in-chain root certificates as openssl is now able to handle it. Further changes coming from Mozilla: - New Root CAs added: * Amazon Root CA 1: (email protection, server auth) * Amazon Root CA 2: (email protection, server auth) * Amazon Root CA 3: (email protection, server auth) * Amazon Root CA 4: (email protection, server auth) * Certplus Root CA G1: (email protection, server auth) * Certplus Root CA G2: (email protection, server auth) * D-TRUST Root CA 3 2013: (email protection) * GDCA TrustAUTH R5 ROOT: (server auth) * Hellenic Academic and Research Institutions ECC RootCA 2015: (email protection, server auth) * Hellenic Academic and Research Institutions RootCA 2015: (email protection, server auth) * ISRG Root X1: (server auth) * LuxTrust Global Root 2: (server auth) * OpenTrust Root CA G1: (email protection, server auth) * OpenTrust Root CA G2: (email protection, server auth) * OpenTrust Root CA G3: (email protection, server auth) * SSL.com EV Root Certification Authority ECC: (server auth) * SSL.com EV Root Certification Authority RSA R2: (server auth) * SSL.com Root Certification Authority ECC: (email protection, server auth) * SSL.com Root Certification Authority RSA: (email protection, server auth) * Symantec Class 1 Public Primary Certification Authority - G4: (email protection) * Symantec Class 1 Public Primary Certification Authority - G6: (email protection) * Symantec Class 2 Public Primary Certification Authority - G4: (email protection) * Symantec Class 2 Public Primary Certification Authority - G6: (email protection) * TrustCor ECA-1: (email protection, server auth) * TrustCor RootCert CA-1: (email protection, server auth) * TrustCor RootCert CA-2: (email protection, server auth) * TUBITAK Kamu SM SSL Kok Sertifikasi - Surum 1: (server auth) - Removed root CAs: * AddTrust Public Services Root * AddTrust Public CA Root * AddTrust Qualified CA Root * ApplicationCA - Japanese Government * Buypass Class 2 CA 1 * CA Disig Root R1 * CA WoSign ECC Root * Certification Authority of WoSign G2 * Certinomis - Autorité Racine * Certum Root CA * China Internet Network Information Center EV Certificates Root * CNNIC ROOT * Comodo Secure Services root * Comodo Trusted Services root * ComSign Secured CA * EBG Elektronik Sertifika Hizmet Sağlayıcısı * Equifax Secure CA * Equifax Secure eBusiness CA 1 * Equifax Secure Global eBusiness CA * GeoTrust Global CA 2 * IGC/A * Juur-SK * Microsec e-Szigno Root CA * PSCProcert * Root CA Generalitat Valenciana * RSA Security 2048 v3 * Security Communication EV RootCA1 * Sonera Class 1 Root CA * StartCom Certification Authority * StartCom Certification Authority G2 * S-TRUST Authentication and Encryption Root CA 2005 PN * Swisscom Root CA 1 * Swisscom Root EV CA 2 * TÜBİTAK UEKAE Kök Sertifika Hizmet Sağlayıcısı - Sürüm 3 * TÜRKTRUST Elektronik Sertifika Hizmet Sağlayıcısı * TÜRKTRUST Elektronik Sertifika Hizmet Sağlayıcısı H6 * UTN USERFirst Hardware Root CA * UTN USERFirst Object Root CA * VeriSign Class 3 Secure Server CA - G2 * Verisign Class 1 Public Primary Certification Authority * Verisign Class 2 Public Primary Certification Authority - G2 * Verisign Class 3 Public Primary Certification Authority * WellsSecure Public Root Certificate Authority * Certification Authority of WoSign * WoSign China - Removed Code Signing rights from a lot of CAs (not listed here). - Removed Server Auth rights from: * AddTrust Low-Value Services Root * Camerfirma Chambers of Commerce Root * Camerfirma Global Chambersign Root * Swisscom Root CA 2 ----------------------------------------- Patch: SUSE-2018-276 Released: Thu Feb 8 17:47:43 2018 Summary: Security update for libxml2 Severity: moderate References: 1077993,1078806,1078813,CVE-2016-5131,CVE-2017-15412,CVE-2017-5130 Description: This update for libxml2 fixes one issue. This security issue was fixed: - CVE-2017-15412: Prevent use after free when calling XPath extension functions that allowed remote attackers to cause DoS or potentially RCE (bsc#1077993) - CVE-2016-5131: Use-after-free vulnerability in libxml2 allowed remote attackers to cause a denial of service or possibly have unspecified other impact via vectors related to the XPointer range-to function. (bsc#1078813) - CVE-2017-5130: Fixed a potential remote buffer overflow in function xmlMemoryStrdup() (bsc#1078806) ----------------------------------------- Patch: SUSE-2018-291 Released: Mon Feb 12 11:50:39 2018 Summary: Recommended update for bash Severity: low References: 1057452,1076909 Description: This update for bash provides the following fix: - Allow process group assignment on all kernel versions to fix the usage of debug traps. (bsc#1057452) - Fix a crash when filesystem is full. (bsc#1076909) - Enable multi-byte characters by default. ----------------------------------------- Patch: SUSE-2018-336 Released: Wed Feb 21 14:26:52 2018 Summary: Security update for libdb-4_8 Severity: moderate References: 1043886 Description: This update for libdb-4_8 fixes the following issues: - A DB_CONFIG file in the current working directory allowed local users to obtain sensitive information via a symlink attack involving a setgid or setuid application using libdb-4_8. (bsc#1043886) ----------------------------------------- Patch: SUSE-2018-355 Released: Mon Feb 26 16:34:46 2018 Summary: Security update for systemd Severity: moderate References: 1057974,1068588,1071224,1071311,1075801,1077925,CVE-2017-18078 Description: This update for systemd fixes the following issues: Security issue fixed: - CVE-2017-18078: tmpfiles: refuse to chown()/chmod() files which are hardlinked, unless protected_hardlinks sysctl is on. This could be used by local attackers to gain privileges (bsc#1077925) Non Security issues fixed: - core: use id unit when retrieving unit file state (#8038) (bsc#1075801) - cryptsetup-generator: run cryptsetup service before swap unit (#5480) - udev-rules: all values can contain escaped double quotes now (#6890) - strv: fix buffer size calculation in strv_join_quoted() - tmpfiles: change ownership of symlinks too - stdio-bridge: Correctly propagate error - stdio-bridge: remove dead code - remove bus-proxyd (bsc#1057974) - core/timer: Prevent timer looping when unit cannot start (bsc#1068588) - Make systemd-timesyncd use the openSUSE NTP servers by default Previously systemd-timesyncd used the Google Public NTP servers time{1..4}.google.com - Don't ship /usr/lib/systemd/system/tmp.mnt at all (bsc#1071224) But we still ship a copy in /var. Users who want to use tmpfs on /tmp are supposed to add a symlink in /etc/ pointing to the copy shipped in /var. To support the update path we automatically create the symlink if tmp.mount in use is located in /usr. - Enable systemd-networkd on Leap distros only (bsc#1071311) ----------------------------------------- Patch: SUSE-2018-439 Released: Fri Mar 9 14:05:22 2018 Summary: Security update for augeas Severity: low References: 1054171,CVE-2017-7555 Description: This update for augeas fixes the following issues: Security issue fixed: - CVE-2017-7555: Fix a memory corruption bug could have lead to arbitrary code execution by passing crafted strings that would be mis-handled by parse_name() (bsc#1054171). ----------------------------------------- Patch: SUSE-2018-446 Released: Mon Mar 12 13:13:55 2018 Summary: Security update for shadow Severity: moderate References: 1081294,CVE-2018-7169 Description: This update for shadow fixes the following issues: - CVE-2018-7169: Fixed an privilege escalation in newgidmap, which allowed an unprivileged user to be placed in a user namespace where setgroups(2) is allowed. (bsc#1081294) ----------------------------------------- Patch: SUSE-2018-465 Released: Thu Mar 15 07:38:52 2018 Summary: Recommended update for systemd Severity: moderate References: 1075743,1078358,1081170 Description: This update for systemd fixes the following issues: - Add dmi/id conditions to 80-acpi-container-hotplug.rules to restrict the rule that it can only be triggered on Huawei Kunlun 9008, 9016 and 9032 machines. (bsc#1078358, bsc#1081170, bsc#1075743) ----------------------------------------- Patch: SUSE-2018-472 Released: Thu Mar 15 10:47:40 2018 Summary: Recommended update for libsolv, libzypp, zypper Severity: low References: 1074687,1075449,1076415,1079334,953130 Description: This update for libsolv, libzypp and zypper provides the following fixes: libsolv: - Fix a bug that could make fileconflict detection very slow in some cases. (bnc#953130) - Add new configuration options: ENABLE_RPMDB_LIBRPM and ENABLE_RPMPKG_LIBRPM. - Add a new function to change the whatprovides data: pool_set_whatprovides. - Significant improvements in the selection code. libzypp: - Make sure deleted keys are also removed from rpmdb. (bsc#1075449) - plugin: Don't reject header values containing ':'. (bsc#1074687) - RpmDb::checkPackage: Fix parsing localized rpm output. (bsc#1076415) zypper: - Do not recommend cron as it is not a direct dependency of zypper. (bsc#1079334) ----------------------------------------- Patch: SUSE-2018-560 Released: Wed Mar 28 16:39:25 2018 Summary: Recommended update for suse-build-key Severity: moderate References: 1082022,1085512 Description: This update for suse-build-key fixes the following issues: - The lifetime of the SUSE Linux Enterprise 11 signing key was extended (bsc#1085512) - A new security@suse.de E-Mail key was added (bsc#1082022) pub rsa4096/0x21FE92322BA9E067 2018-03-15 [SC] [expires: 2020-03-14] Key fingerprint = EC7C 5EAB 2C34 09A6 4F3B BE6E 21FE 9232 2BA9 E067 uid SUSE Security Team uid SUSE Security Team sub rsa4096/0xFF97314EC1E11A0E 2018-03-15 [E] [expires: 2020-03-14] ----------------------------------------- Patch: SUSE-2018-567 Released: Thu Mar 29 14:02:08 2018 Summary: Security update for krb5 Severity: moderate References: 1057662,1081725,1083926,1083927,CVE-2018-5729,CVE-2018-5730 Description: This update for krb5 provides the following fixes: Security issues fixed: - CVE-2018-5730: DN container check bypass by supplying special crafted data (bsc#1083927). - CVE-2018-5729: Null pointer dereference in kadmind or DN container check bypass by supplying special crafted data (bsc#1083926). Non-security issues fixed: - Make it possible for legacy applications (e.g. SAP Netweaver) to remain compatible with newer Kerberos. System administrators who are experiencing this kind of compatibility issues may set the environment variable GSSAPI_ASSUME_MECH_MATCH to a non-empty value, and make sure the environment variable is visible and effective to the application startup script. (bsc#1057662) - Fix a GSS failure in legacy applications by not indicating deprecated GSS mechanisms in gss_indicate_mech() list. (bsc#1081725) ----------------------------------------- Patch: SUSE-2018-586 Released: Wed Apr 4 11:51:00 2018 Summary: Recommended update for aaa_base Severity: low References: 1025743,1036895,1038549,1049577,1052182,1079674 Description: This update for aaa_base provides the following fixes: - Support changing PS1 even for mksh and user root. (bsc#1036895) - Unset unused variables on profile files. (bsc#1049577) - Unset id in csh.cshrc instead of profile.csh. (bsc#1049577) - Allow that personal ~/.bashrc is read again. (bsc#1052182) - Avoid that IFS becomes global in _ls ksh shell function. (bsc#1079674, bsc#1025743) - Replace 'cat > file' by 'mv -f ... file' in pre/post to fix issues with clients having these files mmapped. (bsc#1038549) ----------------------------------------- Patch: SUSE-2018-730 Released: Wed Apr 25 14:14:41 2018 Summary: Security update for perl Severity: moderate References: 1082216,1082233,1082234,CVE-2018-6797,CVE-2018-6798,CVE-2018-6913 Description: This update for perl fixes the following issues: Security issues fixed: - CVE-2018-6913: Fixed space calculation issues in pp_pack.c (bsc#1082216). - CVE-2018-6798: Fixed heap buffer overflow in regexec.c (bsc#1082233). - CVE-2018-6797: Fixed sharp-s regexp overflow (bsc#1082234). ----------------------------------------- Patch: SUSE-2018-736 Released: Wed Apr 25 14:23:49 2018 Summary: Recommended update for libsolv, libzypp Severity: moderate References: 1075978,1077635,1079991,1082318,1086602 Description: This update for libsolv, libzypp provides the following fixes: Changes in libsolv: - Make sure the product file comes from /etc/products.d for the fallback product search. (bsc#1086602) - Also make use of suggests for ordering packages. (bsc#1077635) - Fix bad assignment in solution refinement that led to a memory leak. (bsc#1075978) - Use license tag instead of doc in the spec file. (bsc#1082318) Changes in libzypp: - Make sure the product file comes from /etc/products.d for the fallback product search. (bsc#1086602) - Fix a memory leak in Digest.cc. (bsc#1075978) - Add /var/lib/gdm to CheckAccessDeleted blacklist to prevent showing superfluous `zypper ps -s` messages. (bsc#1079991) ----------------------------------------- Patch: SUSE-2018-779 Released: Wed May 2 22:16:26 2018 Summary: Recommended update for rpm Severity: low References: 1003714,1027925,1069934 Description: This update for rpm provides the following fixes: - Fix find-lang.sh to handle special case of .qm file paths correctly. (bsc#1027925) - Add %sle_version macro to suse_macros. (bsc#1003714) - Added a %rpm_vercmp macro which accepts two versions as parameters and returns -1, 0, 1 if the first version is less than, equal or greater than the second version respectively. - Added a %pkg_version macro that accepts a package or capability name as argument and returns the version number of the installed package. If no package provides the argument, it returns the string '~~~'. - Added a %pkg_vcmp macro that accepts 3 parameters. The first parameter is a package name or provided capability name, the second argument is an operator ( < <= = >= > != ) and the third parameter is a version string to be compared to the installed version of the first argument. - Added a %pkg_version_cmp macro which accepts a package or capability name as first argument and a version number as second argument and returns -1, 0, 1 or '~~~'. The number values have the same meaning as in %rpm_vercmp and the '~~~' string is returned if the package or capability can't be found. (bsc#1069934) ----------------------------------------- Patch: SUSE-2018-797 Released: Mon May 7 07:07:38 2018 Summary: Recommended update for gcc7 Severity: important References: 1061667,1068967,1074621,1083290,1083946,1084812,1087550,1087930 Description: This update for gcc7 to 7.3 release fixes the following issues: - Update to GCC 7.3 release and further updated to gcc-7-branch head (r258812). - The Spectre v2 mitigation patch for s390x is now included. [bsc#1083946] - Adds backport of x86 retpoline support via -mindirect-branch=, -mfunction-return= and friends. [bsc#1074621] - Update includes a fix for chromium build failure. [bsc#1083290] - Various AArch64 compile fixes are included: * Picks fix to no longer enable -mpc-relative-literal-loads by default with --enable-fix-cortex-a53-843419. * Enable --enable-fix-cortex-a53-843419 for aarch64. [bsc#1084812] [bsc#1087930] * Enable --enable-fix-cortex-a53-835769 for aarch64. * Contains fix for PR82445 which is about a RPI1 bootloader miscompile. [bsc#1061667] * Fixed bogus stack probe instruction on ARM. [bsc#1068967] - Revert the ios_base::failure ABI back to compatible behavior with the default ABI. [bsc#1087550] - Fix nvptx offload target compiler install so GCC can pick up required files. Split out the newlib part into cross-nvptx-newlib7-devel and avoid conflicts with GCC 8 variant via Provides/Conflicts of cross-nvptx-newlib-devel. ----------------------------------------- Patch: SUSE-2018-971 Released: Wed May 23 16:45:19 2018 Summary: Recommended update for aaa_base Severity: important References: 1088524 Description: This update for aaa_base fixes a regression which was introduced within the latest maintenance update cycle, where customized profiles were not sourced properly. (bsc#1088524) ----------------------------------------- Patch: SUSE-2018-974 Released: Wed May 23 16:46:50 2018 Summary: Recommended update for systemd Severity: moderate References: 1045092,1051465,1066422,1075804,1082485,1084626,1085062,1086785,1087323 Description: This update for systemd provides the following fixes: - sysusers: Do not append entries after the NIS ones. (bsc#1085062, bsc#1045092) - sysusers: Also add support for NIS entries in /etc/shadow. - sysusers: Make sure to reset errno before calling fget*ent(). - coredump: Respect ulimit -c 0 settings. (bsc#1075804) - systemctl: Don't make up unit states, and don't eat up errors too eagerly. (bsc#1084626) - systemctl: Don't mangle unit names in check_unit_generic(). - rules, compat-rules: Fix errors detected by the rule syntax checker. - python: Use raw strings for regexp patterns. - compat-rules: Make path_id_compat build with meson. - compat-rules: Get rid of scsi_id when generating compat symlinks for NVMe devices. (bsc#1051465) - Fix memory hotplugging. - systemd: Add offline environmental condition to the udev rules for acpi container to prevent them from being triggered by the 'udevadm trigger' from user space. (bsc#1082485) - systemd-udevd: Limit children-max by the available memory. (bsc#1086785, bsc#1066422) - Rename the tarball to reflect the exact version used, so that it is clear that it contains some additional patches on top of the upstream version. Use the commit hash in the name so the exact version can easily be identified. (bsc#1087323) ----------------------------------------- Patch: SUSE-2018-977 Released: Wed May 23 17:14:16 2018 Summary: Security update for bash Severity: moderate References: 1000396,1001299,1086247,CVE-2016-0634,CVE-2016-7543 Description: This update for bash fixes the following issues: Security issues fixed: - CVE-2016-7543: A code execution possibility via SHELLOPTS+PS4 variable was fixed (bsc#1001299) - CVE-2016-0634: Arbitrary code execution via malicious hostname was fixed (bsc#1000396) Non-security issues fixed: - Fix repeating self-calling of traps due the combination of a non-interactive shell, a trap handler for SIGINT, an external process in the trap handler, and a SIGINT within the trap after the external process runs. (bsc#1086247) ----------------------------------------- Patch: SUSE-2018-1028 Released: Tue Jun 5 13:20:44 2018 Summary: Recommended update for pam Severity: low References: 1089884 Description: This update for pam fixes the following issues: - Fix order of accessed configuration files in man page. (bsc#1089884) ----------------------------------------- Patch: SUSE-2018-1082 Released: Thu Jun 7 12:58:56 2018 Summary: Recommended update for rpm Severity: moderate References: 1073879,1080078,964063 Description: This update for rpm fixes the following issues: - Backport support for no_recompute_build_ids macro. (bsc#964063) - Fix code execution when evaluating common python-related macros. (bsc#1080078) Additionally, this update adds python3-rpm to the SUSE Linux Enterprise Server. ----------------------------------------- Patch: SUSE-2018-1141 Released: Fri Jun 15 13:41:08 2018 Summary: Security update for gpg2 Severity: important References: 1096745,CVE-2018-12020 Description: This update for gpg2 fixes the following security issue: - CVE-2018-12020: GnuPG mishandled the original filename during decryption and verification actions, which allowed remote attackers to spoof the output that GnuPG sends on file descriptor 2 to other programs that use the '--status-fd 2' option (bsc#1096745) ----------------------------------------- Patch: SUSE-2018-1242 Released: Thu Jun 28 13:44:16 2018 Summary: Security update for procps Severity: moderate References: 1092100,CVE-2018-1122,CVE-2018-1123,CVE-2018-1124,CVE-2018-1125,CVE-2018-1126 Description: This update for procps fixes the following security issues: - CVE-2018-1122: Prevent local privilege escalation in top. If a user ran top with HOME unset in an attacker-controlled directory, the attacker could have achieved privilege escalation by exploiting one of several vulnerabilities in the config_file() function (bsc#1092100). - CVE-2018-1123: Prevent denial of service in ps via mmap buffer overflow. Inbuilt protection in ps maped a guard page at the end of the overflowed buffer, ensuring that the impact of this flaw is limited to a crash (temporary denial of service) (bsc#1092100). - CVE-2018-1124: Prevent multiple integer overflows leading to a heap corruption in file2strvec function. This allowed a privilege escalation for a local attacker who can create entries in procfs by starting processes, which could result in crashes or arbitrary code execution in proc utilities run by other users (bsc#1092100). - CVE-2018-1125: Prevent stack buffer overflow in pgrep. This vulnerability was mitigated by FORTIFY limiting the impact to a crash (bsc#1092100). - CVE-2018-1126: Ensure correct integer size in proc/alloc.* to prevent truncation/integer overflow issues (bsc#1092100). ----------------------------------------- Patch: SUSE-2018-1328 Released: Tue Jul 17 08:07:57 2018 Summary: Security update for perl Severity: important References: 1068565,1082216,1082233,1082234,1096718,CVE-2018-12015,CVE-2018-6797,CVE-2018-6798,CVE-2018-6913 Description: This update for perl fixes the following issues: These security issue were fixed: - CVE-2018-6913: Fixed space calculation issues in pp_pack.c (bsc#1082216). - CVE-2018-6798: Fixed heap buffer overflow in regexec.c (bsc#1082233). - CVE-2018-6797: Fixed sharp-s regexp overflow (bsc#1082234). - CVE-2018-12015: The Archive::Tar module allowed remote attackers to bypass a directory-traversal protection mechanism and overwrite arbitrary files (bsc#1096718) This non-security issue was fixed: - fix debugger crash in tab completion with Term::ReadLine::Gnu [bsc#1068565] ----------------------------------------- Patch: SUSE-2018-1351 Released: Thu Jul 19 09:43:21 2018 Summary: Security update for shadow Severity: important References: 1099310,CVE-2016-6252 Description: This update for shadow fixes the following issues: - CVE-2016-6252: Incorrect integer handling could results in local privilege escalation (bsc#1099310) ----------------------------------------- Patch: SUSE-2018-1413 Released: Fri Jul 27 12:41:13 2018 Summary: Security update for libgcrypt Severity: moderate References: 1064455,1090766,1097410,CVE-2018-0495 Description: This update for libgcrypt fixes the following issues: The following security vulnerability was addressed: - CVE-2018-0495: Mitigate a novel side-channel attack by enabling blinding for ECDSA signatures (bsc#1097410). The following other issues were fixed: - Extended the fipsdrv dsa-sign and dsa-verify commands with the --algo parameter for the FIPS testing of DSA SigVer and SigGen (bsc#1064455). - Ensure libgcrypt20-hmac and libgcrypt20 are installed in the correct order. (bsc#1090766) ----------------------------------------- Patch: SUSE-2018-1450 Released: Mon Jul 30 10:10:45 2018 Summary: Recommended update for pam Severity: low References: 1096282 Description: This update for pam provides the following fix: - Added /etc/security/limits.d to the pam package. (bsc#1096282) ----------------------------------------- Patch: SUSE-2018-1610 Released: Thu Aug 16 14:04:25 2018 Summary: Security update for libgcrypt Severity: moderate References: 1064455,1090766,1097410,CVE-2018-0495 Description: This update for libgcrypt fixes the following issues: The following security vulnerability was addressed: - CVE-2018-0495: Mitigate a novel side-channel attack by enabling blinding for ECDSA signatures (bsc#1097410). The following other issues were fixed: - Extended the fipsdrv dsa-sign and dsa-verify commands with the --algo parameter for the FIPS testing of DSA SigVer and SigGen (bsc#1064455). - Ensure libgcrypt20-hmac and libgcrypt20 are installed in the correct order. (bsc#1090766) ----------------------------------------- Patch: SUSE-2018-1620 Released: Thu Aug 16 14:49:45 2018 Summary: Security update for shadow Severity: important References: 1099310,CVE-2016-6252 Description: This update for shadow fixes the following issues: - CVE-2016-6252: Incorrect integer handling could results in local privilege escalation (bsc#1099310) ----------------------------------------- Patch: SUSE-2018-1632 Released: Thu Aug 16 15:27:04 2018 Summary: Recommended update for systemd Severity: moderate References: 1039099,1080382,1082004,1082485,1083158,1088052,1088769,1088890,1089761,1090785,1091265,1093851,1095096 Description: This update for systemd fixes the following issues: - core: In --user mode, report READY=1 as soon as basic.target is reached. - sd-bus: Extend D-Bus authentication timeout considerably. - scsi_id: Fixup prefix for pre-SPC inquiry reply. (bsc#1039099) - udev: Use MAC address match only for ibmveth/ibmvnic/mlx4. (bsc#1095096) - compat-rules: Generate more compat by-id symlinks for NVMe devices. (bsc#1095096) - udev: Whitelist mlx4_core locally-administered MAC addresses in the persistent rule generator. (bsc#1083158) - udev: Don't create by-partlabel/primary and .../logical symlinks. (bsc#1089761) - rules: Add /dev/disk/by-partuuid symlinks also for dos partition tables. - device: Make sure to always retroactively start device dependencies. (bsc#1088052) - device: Skip deserialization of device units when udevd is not running. - install: 'user' and 'global' scopes are equivalent for user presets. (bsc#1093851) - install: Search preset files in /run. - man: Updated systemd-analyze blame description for service-units with Type=simple. (bsc#1091265) - logind: Fix crash when shutdown is not issued from a tty. (bsc#1088890) - logind: Do not use an uninitialized variable. (bsc#1088890) - Disable user services by default. (bsc#1090785) - Ship 99-sysctl.conf instead of creating it during package installation/update. (bsc#1088769) Previously this symlink was created in /etc/sysctl.d during %post which made the symlink not owned and more importantly it was created only if /etc/sysctl.conf is already installed which is not always the case during the installation process it seems. So ship the symlink unconditionally and put it in /usr/lib/sysctl.d instead since it's a distro default behavior that might be overriden by sysadmin later. - systemd: Add offline environmental condition to 80-acpi-container-hotplug.rules. (bsc#1080382, bsc#1082485) Add the offline event environmental condition to restrict the rule that is can only be triggered when the change event is received with the 'offline' environmental data. The 27664c581 'ACPI / scan: Send change uevent with offine environmental data' kernel patch changed the corresponding code in kernel. This change prevents the udev rules for acpi container be triggered by 'udevadm trigger' from user space. - build-sys: Explicitly require python3. (bsc#1082004) ----------------------------------------- Patch: SUSE-2018-1636 Released: Thu Aug 16 15:30:11 2018 Summary: Recommended update for pam Severity: low References: 1096282 Description: This update for pam provides the following fix: - Added /etc/security/limits.d to the pam package. (bsc#1096282) ----------------------------------------- Patch: SUSE-2018-1643 Released: Thu Aug 16 17:41:07 2018 Summary: Recommended update for ca-certificates-mozilla Severity: moderate References: 1100415 Description: The systemwide Root CA certificates were updated to the 2.24 state of the Mozilla NSS Certificate store. Following CAs were removed: * S-TRUST_Universal_Root_CA * TC_TrustCenter_Class_3_CA_II * TURKTRUST_Elektronik_Sertifika_Hizmet_Saglayicisi_H5 ----------------------------------------- Patch: SUSE-2018-1689 Released: Mon Aug 20 09:02:24 2018 Summary: Recommended update for pam Severity: low References: 1096282 Description: This update for pam provides the following fix: - Added /etc/security/limits.d to the pam package. (bsc#1096282) ----------------------------------------- Patch: SUSE-2018-1695 Released: Mon Aug 20 09:19:20 2018 Summary: Security update for perl Severity: important References: 1068565,1082216,1082233,1082234,1096718,CVE-2018-12015,CVE-2018-6797,CVE-2018-6798,CVE-2018-6913 Description: This update for perl fixes the following issues: These security issue were fixed: - CVE-2018-6913: Fixed space calculation issues in pp_pack.c (bsc#1082216). - CVE-2018-6798: Fixed heap buffer overflow in regexec.c (bsc#1082233). - CVE-2018-6797: Fixed sharp-s regexp overflow (bsc#1082234). - CVE-2018-12015: The Archive::Tar module allowed remote attackers to bypass a directory-traversal protection mechanism and overwrite arbitrary files (bsc#1096718) This non-security issue was fixed: - fix debugger crash in tab completion with Term::ReadLine::Gnu [bsc#1068565] ----------------------------------------- Patch: SUSE-2018-1698 Released: Mon Aug 20 09:19:28 2018 Summary: Security update for shadow Severity: important References: 1099310,CVE-2016-6252 Description: This update for shadow fixes the following issues: - CVE-2016-6252: Incorrect integer handling could results in local privilege escalation (bsc#1099310) ----------------------------------------- Patch: SUSE-2018-1763 Released: Mon Aug 27 09:30:15 2018 Summary: Recommended update for ca-certificates-mozilla Severity: moderate References: 1104780 Description: This update for ca-certificates-mozilla fixes the following issues: The Root CA store was updated to 2.26 state of the Mozilla NSS Certificate store. (bsc#1104780) - Removed server auth from following CAs: - Certplus Root CA G1 - Certplus Root CA G2 - OpenTrust Root CA G1 - OpenTrust Root CA G2 - OpenTrust Root CA G3 - Removed CAs - ComSign CA - Added new CAs - GlobalSign ----------------------------------------- Patch: SUSE-2018-1834 Released: Wed Sep 5 10:17:42 2018 Summary: Recommended update for systemd Severity: moderate References: 1089761,1090944,1101040,1103910 Description: This update for systemd fixes the following issues: - cryptsetup: Add support for sector-size= option. (fate#325634) - resolved: Apply epoch to system time from PID 1. (bsc#1103910) - core/service: Rework the hold-off time over message. - core: Don't freeze OnCalendar= timer units when the clock goes back a lot. (bsc#1090944) - man: SystemMaxUse= clarification in journald.conf(5). (bsc#1101040) - Add udev.no-partlabel-links kernel command-line option. This option can be used to disable the generation of the by-partlabel symlinks regardless of the name used. (bsc#1089761) ----------------------------------------- Patch: SUSE-2018-1969 Released: Mon Sep 24 08:06:42 2018 Summary: Security update for libzypp, zypper Severity: important References: 1036304,1045735,1049825,1070851,1076192,1088705,1091624,1092413,1096803,1099847,1100028,1101349,1102429,CVE-2017-9269,CVE-2018-7685 Description: This update for libzypp, zypper fixes the following issues: Update libzypp to version 16.17.20: Security issues fixed: - PackageProvider: Validate deta rpms before caching (bsc#1091624, bsc#1088705, CVE-2018-7685) - PackageProvider: Validate downloaded rpm package signatures before caching (bsc#1091624, bsc#1088705, CVE-2018-7685) Other bugs fixed: - lsof: use '-K i' if lsof supports it (bsc#1099847, bsc#1036304) - Handle http error 502 Bad Gateway in curl backend (bsc#1070851) - RepoManager: Explicitly request repo2solv to generate application pseudo packages. - libzypp-devel should not require cmake (bsc#1101349) - HardLocksFile: Prevent against empty commit without Target having been been loaded (bsc#1096803) - Avoid zombie tar processes (bsc#1076192) Update to zypper to version 1.13.45: Security issues fixed: - Improve signature check callback messages (bsc#1045735, CVE-2017-9269) - add/modify repo: Add options to tune the GPG check settings (bsc#1045735, CVE-2017-9269) Other bugs fixed: - XML attribute `packages-to-change` added (bsc#1102429) - man: Strengthen that `--config FILE' affects zypper.conf, not zypp.conf (bsc#1100028) - Prevent nested calls to exit() if aborted by a signal (bsc#1092413) - ansi.h: Prevent ESC sequence strings from going out of scope (bsc#1092413) - Fix: zypper bash completion expands non-existing options (bsc#1049825) - Improve signature check callback messages (bsc#1045735) - add/modify repo: Add options to tune the GPG check settings (bsc#1045735) ----------------------------------------- Patch: SUSE-2018-1985 Released: Mon Sep 24 11:56:08 2018 Summary: Recommended update for openldap2 Severity: moderate References: 1089640 Description: This update for openldap2 provides the following fix: - Fix slapd segfaults in mdb_env_reader_dest. (bsc#1089640) ----------------------------------------- Patch: SUSE-2018-1994 Released: Mon Sep 24 12:55:57 2018 Summary: Security update for shadow Severity: moderate References: 1106914 Description: This update for shadow fixes the following security issue: - Prevent useradd from creating intermediate directories with mode 0777 (bsc#1106914) ----------------------------------------- Patch: SUSE-2018-2036 Released: Wed Sep 26 11:56:30 2018 Summary: Initial release of kubic-locale-archive Severity: low References: Description: This update provides kubic-locale-archive for the codestream. ----------------------------------------- Patch: SUSE-2018-2162 Released: Fri Oct 5 14:46:53 2018 Summary: Recommended update for krb5 Severity: moderate References: 1088921 Description: This update for krb5 provides the following fix: - Resolve krb5 GSS credentials immediately if the application requests the lifetime. (bsc#1088921) ----------------------------------------- Patch: SUSE-2018-2181 Released: Tue Oct 9 11:08:20 2018 Summary: Security update for libxml2 Severity: moderate References: 1088279,1088601,1102046,1105166,CVE-2017-18258,CVE-2018-14404,CVE-2018-14567,CVE-2018-9251 Description: This update for libxml2 fixes the following security issues: - CVE-2018-9251: The xz_decomp function allowed remote attackers to cause a denial of service (infinite loop) via a crafted XML file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint (bsc#1088279). - CVE-2018-14567: Prevent denial of service (infinite loop) via a crafted XML file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint (bsc#1105166). - CVE-2018-14404: Prevent NULL pointer dereference in the xmlXPathCompOpEval() function when parsing an invalid XPath expression in the XPATH_OP_AND or XPATH_OP_OR case leading to a denial of service attack (bsc#1102046). - CVE-2017-18258: The xz_head function allowed remote attackers to cause a denial of service (memory consumption) via a crafted LZMA file, because the decoder functionality did not restrict memory usage to what is required for a legitimate file (bsc#1088601). ----------------------------------------- Patch: SUSE-2018-2196 Released: Thu Oct 11 07:45:16 2018 Summary: Optional update for gcc8 Severity: low References: 1084812,1084842,1087550,1094222,1102564 Description: The GNU Compiler GCC 8 is being added to the Toolchain Module by this update. The update also supplies gcc8 compatible libstdc++, libgcc_s1 and other gcc derived libraries for the base products of SUSE Linux Enterprise 12. Various optimizers have been improved in GCC 8, several of bugs fixed, quite some new warnings added and the error pin-pointing and fix-suggestions have been greatly improved. The GNU Compiler page for GCC 8 contains a summary of all the changes that have happened: https://gcc.gnu.org/gcc-8/changes.html Also changes needed or common pitfalls when porting software are described on: https://gcc.gnu.org/gcc-8/porting_to.html ----------------------------------------- Patch: SUSE-2018-2217 Released: Fri Oct 12 15:07:24 2018 Summary: Recommended update for bash Severity: moderate References: 1094121,1107430 Description: This update for bash provides the following fixes: - Fix an inconsistent behaviour regarding expansion of here strings. (bsc#1094121) - Fix mis-matching of null string with '*' pattern. (bsc#1107430) - Fix a crash when the lastpipe option is enabled. - Fix a typo that was preventing the `compat42' shopt option from working as intended. - Help the shell to process any pending traps at redirection. - Fix a crashe due to incorrect conversion from an indexed to associative array. - Avoid the expansion of escape sequences in HOSTNAME in prompt. - Avoid `xtrace' attack over $PS4. ----------------------------------------- Patch: SUSE-2018-2320 Released: Fri Oct 19 12:51:43 2018 Summary: Security update for libssh Severity: important References: 1108020,CVE-2018-10933 Description: This update for libssh fixes the following issues: Security issue fixed: - CVE-2018-10933: Fixed a server mode authentication bypass (bsc#1108020). Non security issue fixed: - Fix popd syntax to be compatible with newer versions of the bash shell. ----------------------------------------- Patch: SUSE-2018-2373 Released: Mon Oct 22 14:43:47 2018 Summary: Security update for rpm Severity: moderate References: 1077692,943457,CVE-2017-7500,CVE-2017-7501 Description: This update for rpm fixes the following issues: These security issues were fixed: - CVE-2017-7500: rpm did not properly handle RPM installations when a destination path was a symbolic link to a directory, possibly changing ownership and permissions of an arbitrary directory, and RPM files being placed in an arbitrary destination (bsc#943457). - CVE-2017-7501: rpm used temporary files with predictable names when installing an RPM. An attacker with ability to write in a directory where files will be installed could create symbolic links to an arbitrary location and modify content, and possibly permissions to arbitrary files, which could be used for denial of service or possibly privilege escalation (bsc#943457) This non-security issue was fixed: - Use ksym-provides tool [bsc#1077692] ----------------------------------------- Patch: SUSE-2018-2435 Released: Wed Oct 24 14:42:43 2018 Summary: Recommended update for systemd Severity: important References: 1015254,1091677,1093753,1105031,1107640,1107941,1109197,991901 Description: This update for systemd fixes the following issues: - detect-virt: do not try to read all of /proc/cpuinfo (bsc#1109197) - emergency: make sure console password agents don't interfere with the emergency shell - units: remove udev control socket when systemd stops the socket unit (#4039) (bsc#1015254) - man: document that 'nofail' also has an effect on ordering - journald: take leading spaces into account in syslog_parse_identifier - journal: do not remove multiple spaces after identifier in syslog message - syslog: fix segfault in syslog_parse_priority() - journal: fix syslog_parse_identifier() - tmpfiles: don't adjust qgroups on existing subvolumes (bsc#1093753) - socket-util: attempt SO_RCVBUFFORCE/SO_SNDBUFFORCE only if SO_RCVBUF/SO_SNDBUF fails (bsc#991901) - user@.service: don't kill user manager at runlevel switch (bsc#1091677) - units: make sure user@.service runs with dbus still up - fix race between daemon-reload and other commands (bsc#1105031) - nspawn: always use mode 555 for /sys (bsc#1107640) - cryptsetup: do not define arg_sector_size if libgcrypt is v1.x (#9990) - Enable or disable machines.target according to the presets (bsc#1107941) ----------------------------------------- Patch: SUSE-2018-2475 Released: Thu Oct 25 16:56:24 2018 Summary: Recommended update for libzypp Severity: moderate References: 1099982,1109877,408814,556664,939392 Description: This update for libzypp fixes the following issues: - Add filesize check for downloads with known size (bsc#408814) - Fix conversion of string and glob to regex when compiling queries (bsc#1099982, bsc#939392, bsc#556664) - Fix blocking wait for finished child process (bsc#1109877) ----------------------------------------- Patch: SUSE-2018-2488 Released: Fri Oct 26 12:39:59 2018 Summary: Recommended update for cpio Severity: low References: 1076810,889138 Description: This update for cpio provides the following fix: - Remove an obsolete patch that was causing cpio not to preserve folder permissions. (bsc#1076810, bsc#889138) ----------------------------------------- Patch: SUSE-2018-2525 Released: Tue Oct 30 09:22:45 2018 Summary: Recommended update for bash Severity: important References: 1113117 Description: This update for bash fixes the following issues: Recently released update introduced a change of behavior which resulted in broken customers scripts. (bsc#1113117) ----------------------------------------- Patch: SUSE-2018-2593 Released: Wed Nov 7 11:04:00 2018 Summary: Recommended update for rpm Severity: moderate References: 1095148,1113100 Description: This update for rpm fixes the following issues: - Fix superfluous TOC. dependency on PowerPC64 (bsc#1113100) - Update to current find-provides.ksyms and find-requires.ksyms scripts (bsc#1095148) ----------------------------------------- Patch: SUSE-2018-2659 Released: Wed Nov 14 14:14:41 2018 Summary: Security update for systemd Severity: important References: 1106923,1108835,1109252,1110445,1111278,1112024,1113083,1113632,1113665,CVE-2018-15686,CVE-2018-15688 Description: This update for systemd fixes the following issues: Security issues fixed: - CVE-2018-15688: A buffer overflow vulnerability in the dhcp6 client of systemd allowed a malicious dhcp6 server to overwrite heap memory in systemd-networkd. (bsc#1113632) - CVE-2018-15686: A vulnerability in unit_deserialize of systemd allows an attacker to supply arbitrary state across systemd re-execution via NotifyAccess. This can be used to improperly influence systemd execution and possibly lead to root privilege escalation. (bsc#1113665) Non-security issues fixed: - dhcp6: split assert_return() to be more debuggable when hit - core: skip unit deserialization and move to the next one when unit_deserialize() fails - core: properly handle deserialization of unknown unit types (#6476) - core: don't create Requires for workdir if 'missing ok' (bsc#1113083) - logind: use manager_get_user_by_pid() where appropriate - logind: rework manager_get_{user|session}_by_pid() a bit - login: fix user@.service case, so we don't allow nested sessions (#8051) (bsc#1112024) - core: be more defensive if we can't determine per-connection socket peer (#7329) - socket-util: introduce port argument in sockaddr_port() - service: fixup ExecStop for socket-activated shutdown (#4120) - service: Continue shutdown on socket activated unit on termination (#4108) (bsc#1106923) - cryptsetup: build fixes for 'add support for sector-size= option' - udev-rules: IMPORT cmdline does not recognize keys with similar names (bsc#1111278) - core: keep the kernel coredump defaults when systemd-coredump is disabled - core: shorten main() a bit, split out coredump initialization - core: set RLIMIT_CORE to unlimited by default (bsc#1108835) - core/mount: fstype may be NULL - journald: don't ship systemd-journald-audit.socket (bsc#1109252) - core: make 'tmpfs' dependencies on swapfs a 'default' dep, not an 'implicit' (bsc#1110445) - mount: make sure we unmount tmpfs mounts before we deactivate swaps (#7076) - tmp.mount.hm4: After swap.target (#3087) - Ship systemd-sysv-install helper via the main package This script was part of systemd-sysvinit sub-package but it was wrong since systemd-sysv-install is a script used to redirect enable/disable operations to chkconfig when the unit targets are sysv init scripts. Therefore it's never been a SySV init tool. ----------------------------------------- Patch: SUSE-2018-2766 Released: Fri Nov 23 17:07:27 2018 Summary: Security update for rpm Severity: important References: 943457,CVE-2017-7500,CVE-2017-7501 Description: This update for rpm fixes the following issues: These security issues were fixed: - CVE-2017-7500: rpm did not properly handle RPM installations when a destination path was a symbolic link to a directory, possibly changing ownership and permissions of an arbitrary directory, and RPM files being placed in an arbitrary destination (bsc#943457). - CVE-2017-7501: rpm used temporary files with predictable names when installing an RPM. An attacker with ability to write in a directory where files will be installed could create symbolic links to an arbitrary location and modify content, and possibly permissions to arbitrary files, which could be used for denial of service or possibly privilege escalation (bsc#943457) This is a reissue of the above security fixes for SUSE Linux Enterprise 12 GA, SP1 and SP2 LTSS, they have already been released for SUSE Linux Enterprise Server 12 SP3. ----------------------------------------- Patch: SUSE-2018-1697 Released: Fri Nov 23 17:08:32 2018 Summary: Security update for libgcrypt Severity: moderate References: 1064455,1090766,1097410,CVE-2018-0495 Description: This update for libgcrypt fixes the following issues: The following security vulnerability was addressed: - CVE-2018-0495: Mitigate a novel side-channel attack by enabling blinding for ECDSA signatures (bsc#1097410). The following other issues were fixed: - Extended the fipsdrv dsa-sign and dsa-verify commands with the --algo parameter for the FIPS testing of DSA SigVer and SigGen (bsc#1064455). - Ensure libgcrypt20-hmac and libgcrypt20 are installed in the correct order. (bsc#1090766) ----------------------------------------- Patch: SUSE-2018-1696 Released: Mon Nov 26 17:46:39 2018 Summary: Security update for procps Severity: moderate References: 1092100,CVE-2018-1122,CVE-2018-1123,CVE-2018-1124,CVE-2018-1125,CVE-2018-1126 Description: This update for procps fixes the following security issues: - CVE-2018-1122: Prevent local privilege escalation in top. If a user ran top with HOME unset in an attacker-controlled directory, the attacker could have achieved privilege escalation by exploiting one of several vulnerabilities in the config_file() function (bsc#1092100). - CVE-2018-1123: Prevent denial of service in ps via mmap buffer overflow. Inbuilt protection in ps maped a guard page at the end of the overflowed buffer, ensuring that the impact of this flaw is limited to a crash (temporary denial of service) (bsc#1092100). - CVE-2018-1124: Prevent multiple integer overflows leading to a heap corruption in file2strvec function. This allowed a privilege escalation for a local attacker who can create entries in procfs by starting processes, which could result in crashes or arbitrary code execution in proc utilities run by other users (bsc#1092100). - CVE-2018-1125: Prevent stack buffer overflow in pgrep. This vulnerability was mitigated by FORTIFY limiting the impact to a crash (bsc#1092100). - CVE-2018-1126: Ensure correct integer size in proc/alloc.* to prevent truncation/integer overflow issues (bsc#1092100). ----------------------------------------- Patch: SUSE-2018-2811 Released: Thu Nov 29 11:24:19 2018 Summary: Recommended update for aaa_base Severity: moderate References: 1040613,1095969,1102310 Description: This update for aaa_base provides the following fixes: - Get mixed use case of service wrapper script straight. (bsc#1040613) - Fix an error at login if java system directory is empty. (bsc#1102310) - Add a test for xdgdir/applications before adding data directory (bsc#1095969) ----------------------------------------- Patch: SUSE-2018-2824 Released: Mon Dec 3 15:34:09 2018 Summary: Security update for ncurses Severity: important References: 1115929,CVE-2018-19211 Description: This update for ncurses fixes the following issue: Security issue fixed: - CVE-2018-19211: Fixed denial of service issue that was triggered by a NULL pointer dereference at function _nc_parse_entry (bsc#1115929). ----------------------------------------- Patch: SUSE-2018-2842 Released: Wed Dec 5 10:00:35 2018 Summary: Recommended update for suse-build-key Severity: moderate References: 1044232 Description: This update for suse-build-key fixes the following issues: - Install the PTF key also to /usr/lib/rpm/gnupg/keys/ so it can exists also on systems where documentation is not installed. (bsc#1044232) ----------------------------------------- Patch: SUSE-2018-2846 Released: Wed Dec 5 12:50:41 2018 Summary: Security update for openssl-1_0_0 Severity: moderate References: 1100078,1112209,1113534,1113652,1113742,CVE-2018-0734,CVE-2018-5407 Description: This update for openssl-1_0_0 fixes the following issues: Security issues fixed: - CVE-2018-0734: Fixed timing vulnerability in DSA signature generation (bsc#1113652). - CVE-2018-5407: Fixed elliptic curve scalar multiplication timing attack defenses (bsc#1113534). - Add missing timing side channel patch for DSA signature generation (bsc#1113742). Non-security issues fixed: - Fixed infinite loop in DSA generation with incorrect parameters (bsc#1112209). - Set TLS version to 0 in msg_callback for record messages to avoid confusing applications (bsc#1100078). ----------------------------------------- Patch: SUSE-2018-2947 Released: Mon Dec 17 08:51:28 2018 Summary: Security update for openldap2 Severity: moderate References: 1073313,CVE-2017-17740 Description: This update for openldap2 fixes the following issues: Security issue fixed: - CVE-2017-17740: When both the nops module and the memberof overlay are enabled, attempts to free a buffer that was allocated on the stack, which allows remote attackers to cause a denial of service (slapd crash) via a member MODDN operation. (bsc#1073313) ----------------------------------------- Patch: SUSE-2018-3004 Released: Wed Dec 19 21:51:38 2018 Summary: Recommended update for SLES-release Severity: moderate References: 1107040 Description: This update for SLES-release provides the following fix: - Remove SLE hardcoded values from grub. (bsc#1107040) ----------------------------------------- Patch: SUSE-2018-3029 Released: Fri Dec 21 17:34:05 2018 Summary: Recommended update for libgcrypt Severity: moderate References: 1117355 Description: This update for libgcrypt provides the following fix: - Fail selftests when checksum file is missing in FIPS mode only. (bsc#1117355) ----------------------------------------- Patch: SUSE-2019-43 Released: Tue Jan 8 13:07:17 2019 Summary: Recommended update for acl Severity: low References: 953659 Description: This update for acl fixes the following issues: - quote: Escape literal backslashes (bsc#953659). ----------------------------------------- Patch: SUSE-2019-111 Released: Thu Jan 17 14:18:31 2019 Summary: Security update for krb5 Severity: important References: 1120489,CVE-2018-20217 Description: This update for krb5 fixes the following issues: Security issue fixed: - CVE-2018-20217: Fixed an assertion issue with older encryption types (bsc#1120489) ----------------------------------------- Patch: SUSE-2019-135 Released: Mon Jan 21 13:53:58 2019 Summary: Security update for systemd Severity: moderate References: 1005023,1076696,1101591,1114981,1115518,1119971,1120323,CVE-2018-16864,CVE-2018-16865,CVE-2018-16866 Description: This update for systemd provides the following fixes: Security issues fixed: - CVE-2018-16864, CVE-2018-16865: Fixed two memory corruptions through attacker-controlled alloca()s (bsc#1120323) - CVE-2018-16866: Fixed an information leak in journald (bsc#1120323) - Fixed an issue during system startup in relation to encrypted swap disks (bsc#1119971) Non-security issues fixed: - core: Queue loading transient units after setting their properties. (bsc#1115518) - logind: Stop managing VT switches if no sessions are registered on that VT. (bsc#1101591) - terminal-util: introduce vt_release() and vt_restore() helpers. - terminal: Unify code for resetting kbd utf8 mode a bit. - terminal Reset should honour default_utf8 kernel setting. - logind: Make session_restore_vt() static. - udev: Downgrade message when settting inotify watch up fails. (bsc#1005023) - log: Never log into foreign fd #2 in PID 1 or its pre-execve() children. (bsc#1114981) - udev: Ignore the exit code of systemd-detect-virt for memory hot-add. In SLE-12-SP3, 80-hotplug-cpu-mem.rules has a memory hot-add rule that uses systemd-detect-virt to detect non-zvm environment. The systemd-detect-virt returns exit failure code when it detected _none_ state. The exit failure code causes that the hot-add memory block can not be set to online. (bsc#1076696) ----------------------------------------- Patch: SUSE-2019-143 Released: Tue Jan 22 14:21:55 2019 Summary: Recommended update for ncurses Severity: important References: 1121450 Description: This update for ncurses fixes the following issues: - ncurses applications freezing (bsc#1121450) ----------------------------------------- Patch: SUSE-2019-149 Released: Wed Jan 23 17:58:18 2019 Summary: Recommended update for ca-certificates-mozilla Severity: moderate References: 1121446 Description: This update for ca-certificates-mozilla fixes the following issues: The package was updated to the 2.30 version of the Mozilla NSS Certificate store. (bsc#1121446) Removed Root CAs: - AC Raiz Certicamara S.A. - Certplus Root CA G1 - Certplus Root CA G2 - OpenTrust Root CA G1 - OpenTrust Root CA G2 - OpenTrust Root CA G3 - Visa eCommerce Root Added Root CAs: - Certigna Root CA (email and server auth) - GTS Root R1 (server auth) - GTS Root R2 (server auth) - GTS Root R3 (server auth) - GTS Root R4 (server auth) - OISTE WISeKey Global Root GC CA (email and server auth) - UCA Extended Validation Root (server auth) - UCA Global G2 Root (email and server auth) ----------------------------------------- Patch: SUSE-2019-339 Released: Wed Feb 13 08:33:49 2019 Summary: Security update for curl Severity: important References: 1112758,1113029,1113660,1123371,1123377,1123378,CVE-2018-16839,CVE-2018-16840,CVE-2018-16842,CVE-2018-16890,CVE-2019-3822,CVE-2019-3823 Description: This update for curl fixes the following issues: Security issues fixed: - CVE-2019-3822: Fixed a NTLMv2 type-3 header stack buffer overflow (bsc#1123377). - CVE-2019-3823: Fixed an out-of-bounds read in the SMTP end-of-response (bsc#1123378). - CVE-2018-16890: Fixed an out-of-bounds buffer read in NTLM type2 (bsc#1123371). - CVE-2018-16842: Fixed an out-of-bounds read in tool_msgs.c (bsc#1113660). - CVE-2018-16840: Fixed a use-after-free in handle close (bsc#1113029). - CVE-2018-16839: Fixed an SASL password overflow caused by an integer overflow (bsc#1112758). ----------------------------------------- Patch: SUSE-2019-428 Released: Tue Feb 19 10:59:59 2019 Summary: Security update for systemd Severity: important References: 1111498,1117025,1117382,1120658,1122000,1122344,1123333,1123892,1125352,CVE-2019-6454 Description: This update for systemd fixes the following issues: Security vulnerability fixed: - CVE-2019-6454: Fixed a crash of PID1 by sending specially crafted D-BUS message on the system bus by an unprivileged user (bsc#1125352) Other bug fixes and changes: - journal-remote: set a limit on the number of fields in a message - journal-remote: verify entry length from header - journald: set a limit on the number of fields (1k) - journald: do not store the iovec entry for process commandline on stack - core: include Found state in device dumps - device: fix serialization and deserialization of DeviceFound - fix path in btrfs rule (#6844) - assemble multidevice btrfs volumes without external tools (#6607) (bsc#1117025) - Update systemd-system.conf.xml (bsc#1122000) - units: inform user that the default target is started after exiting from rescue or emergency mode - manager: don't skip sigchld handler for main and control pid for services (#3738) - core: Add helper functions unit_{main, control}_pid - manager: Fixing a debug printf formatting mistake (#3640) - manager: Only invoke a single sigchld per unit within a cleanup cycle (bsc#1117382) - core: update invoke_sigchld_event() to handle NULL ->sigchld_event() - sd-event: expose the event loop iteration counter via sd_event_get_iteration() (#3631) - unit: rework a bit how we keep the service fdstore from being destroyed during service restart (bsc#1122344) - core: when restarting services, don't close fds - cryptsetup: Add dependency on loopback setup to generated units - journal-gateway: use localStorage['cursor'] only when it has valid value - journal-gateway: explicitly declare local variables - analyze: actually select longest activated-time of services - sd-bus: fix implicit downcast of bitfield reported by LGTM - core: free lines after reading them (bsc#1123892) - pam_systemd: reword message about not creating a session (bsc#1111498) - pam_systemd: suppress LOG_DEBUG log messages if debugging is off (bsc#1111498) - main: improve RLIMIT_NOFILE handling (#5795) (bsc#1120658) - sd-bus: if we receive an invalid dbus message, ignore and proceeed - automount: don't pass non-blocking pipe to kernel. - units: make sure initrd-cleanup.service terminates before switching to rootfs (bsc#1123333) - units: add Wants=initrd-cleanup.service to initrd-switch-root.target (#4345) (bsc#1123333) ----------------------------------------- Patch: SUSE-2019-434 Released: Tue Feb 19 12:19:02 2019 Summary: Recommended update for libsemanage Severity: moderate References: 1115500 Description: This update for libsemanage provides the following fix: - Prevent an error message when reading module version if the directory does not exist. (bsc#1115500) ----------------------------------------- Patch: SUSE-2019-450 Released: Wed Feb 20 16:42:38 2019 Summary: Security update for procps Severity: important References: 1092100,1121753,CVE-2018-1122,CVE-2018-1123,CVE-2018-1124,CVE-2018-1125,CVE-2018-1126 Description: This update for procps fixes the following security issues: - CVE-2018-1122: Prevent local privilege escalation in top. If a user ran top with HOME unset in an attacker-controlled directory, the attacker could have achieved privilege escalation by exploiting one of several vulnerabilities in the config_file() function (bsc#1092100). - CVE-2018-1123: Prevent denial of service in ps via mmap buffer overflow. Inbuilt protection in ps maped a guard page at the end of the overflowed buffer, ensuring that the impact of this flaw is limited to a crash (temporary denial of service) (bsc#1092100). - CVE-2018-1124: Prevent multiple integer overflows leading to a heap corruption in file2strvec function. This allowed a privilege escalation for a local attacker who can create entries in procfs by starting processes, which could result in crashes or arbitrary code execution in proc utilities run by other users (bsc#1092100). - CVE-2018-1125: Prevent stack buffer overflow in pgrep. This vulnerability was mitigated by FORTIFY limiting the impact to a crash (bsc#1092100). - CVE-2018-1126: Ensure correct integer size in proc/alloc.* to prevent truncation/integer overflow issues (bsc#1092100). (These issues were previously released for SUSE Linux Enterprise 12 SP3 and SP4.) Also the following non-security issue was fixed: - Fix CPU summary showing old data. (bsc#1121753) ----------------------------------------- Patch: SUSE-2019-563 Released: Wed Mar 6 17:20:15 2019 Summary: Security update for audit Severity: moderate References: 1042781,1085003,1125535,941922,CVE-2015-5186 Description: This update for audit fixes the following issues: Audit on SUSE Linux Enterprise 12 SP4 was updated to 2.8.1 to bring new features and bugfixes. (bsc#1125535 FATE#326346) * Many features were added to auparse_normalize * cli option added to auditd and audispd for setting config dir * In auditd, restore the umask after creating a log file * Option added to auditd for skipping email verification The full changelog can be found here: http://people.redhat.com/sgrubb/audit/ChangeLog - Change openldap dependency to client only (bsc#1085003) Minor security issue fixed: - CVE-2015-5186: Audit: log terminal emulator escape sequences handling (bsc#941922) ----------------------------------------- Patch: SUSE-2019-572 Released: Fri Mar 8 09:24:21 2019 Summary: Security update for openssl-1_0_0 Severity: moderate References: 1117951,1127080,CVE-2019-1559 Description: This update for openssl-1_0_0 fixes the following issues: Security issues fixed: - The 9 Lives of Bleichenbacher's CAT: Cache Attacks on TLS Implementations (bsc#1117951) - CVE-2019-1559: Fixed OpenSSL 0-byte Record Padding Oracle which under certain circumstances a TLS server can be forced to respond differently to a client and lead to the decryption of the data (bsc#1127080). ----------------------------------------- Patch: SUSE-2019-794 Released: Thu Mar 28 12:09:29 2019 Summary: Recommended update for krb5 Severity: moderate References: 1087481 Description: This update for krb5 fixes the following issues: - Add support for the GSS_KRB5_CRED_NO_CI_FLAGS_X cred option to suppress sending the confidentiality and integrity flags in GSS initiator tokens unless they are requested by the caller. These flags control the negotiated SASL security layer for the Microsoft GSS-SPNEGO SASL mechanism. (bsc#1087481). ----------------------------------------- Patch: SUSE-2019-838 Released: Tue Apr 2 09:52:06 2019 Summary: Security update for bash Severity: important References: 1130324,CVE-2019-9924 Description: This update for bash fixes the following issues: Security issue fixed: - CVE-2019-9924: Fixed a vulnerability in which shell did not prevent user BASH_CMDS allowing the user to execute any command with the permissions of the shell (bsc#1130324). ----------------------------------------- Patch: SUSE-2019-839 Released: Tue Apr 2 13:13:21 2019 Summary: Security update for file Severity: moderate References: 1096974,1096984,1126117,1126118,1126119,CVE-2018-10360,CVE-2019-8905,CVE-2019-8906,CVE-2019-8907 Description: This update for file fixes the following issues: The following security vulnerabilities were addressed: - Fixed an out-of-bounds read in the function do_core_note in readelf.c, which allowed remote attackers to cause a denial of service (application crash) via a crafted ELF file (bsc#1096974 CVE-2018-10360). - CVE-2019-8905: Fixed a stack-based buffer over-read in do_core_note in readelf.c (bsc#1126118) - CVE-2019-8906: Fixed an out-of-bounds read in do_core_note in readelf. c (bsc#1126119) - CVE-2019-8907: Fixed a stack corruption in do_core_note in readelf.c (bsc#1126117) ----------------------------------------- Patch: SUSE-2019-1005 Released: Wed Apr 24 11:59:57 2019 Summary: Recommended update for zlib Severity: moderate References: 1110304,1129576 Description: This update for zlib fixes the following issue: - Fix a segmentation fault in CRC32 code on POWER (bsc#1110304, bsc#1129576) ----------------------------------------- Patch: SUSE-2019-1102 Released: Tue Apr 30 12:07:42 2019 Summary: Security update for glibc Severity: moderate References: 1100396,1110661,1122729,1127223,1127308,1128574,1131994,CVE-2009-5155,CVE-2016-10739,CVE-2019-9169 Description: This update for glibc fixes the following issues: Security issues fixed: - CVE-2019-9169: regex: fix read overrun (bsc#1127308, BZ #24114) - CVE-2016-10739: Fully parse IPv4 address strings (bsc#1122729, BZ #20018) - CVE-2009-5155: ERE '0|()0|\1|0' causes regexec undefined behavior (bsc#1127223, BZ #18986) Non-security issues fixed: - Enable TLE only if GLIBC_ELISION_ENABLE=yes is defined (bsc#1131994, fate#322271) - Add more checks for valid ld.so.cache file (bsc#1110661, BZ #18093) - Added cfi information for start routines in order to stop unwinding (bsc#1128574) - ja_JP locale: Add entry for the new Japanese era (bsc#1100396, fate#325570, BZ #22964) ----------------------------------------- Patch: SUSE-2019-1265 Released: Thu May 16 09:52:22 2019 Summary: Security update for systemd Severity: important References: 1080919,1121563,1125352,1126056,1127557,1128657,1130230,1132348,1132400,1132721,955942,CVE-2018-6954,CVE-2019-3842,CVE-2019-6454,SLE-5933 Description: This update for systemd fixes the following issues: Security issues fixed: - CVE-2018-6954: Fixed a vulnerability in the symlink handling of systemd-tmpfiles which allowed a local user to obtain ownership of arbitrary files (bsc#1080919). - CVE-2019-3842: Fixed a vulnerability in pam_systemd which allowed a local user to escalate privileges (bsc#1132348). - CVE-2019-6454: Fixed a denial of service caused by long dbus messages (bsc#1125352). Non-security issues fixed: - systemd-coredump: generate a stack trace of all core dumps (jsc#SLE-5933) - udevd: notify when max number value of children is reached only once per batch of events (bsc#1132400) - sd-bus: bump message queue size again (bsc#1132721) - core: only watch processes when it's really necessary (bsc#955942 bsc#1128657) - rules: load drivers only on 'add' events (bsc#1126056) - sysctl: Don't pass null directive argument to '%s' (bsc#1121563) - Do not automatically online memory on s390x (bsc#1127557) ----------------------------------------- Patch: SUSE-2019-1379 Released: Wed May 29 15:07:04 2019 Summary: Security update for libtasn1 Severity: moderate References: 1040621,1105435,CVE-2017-6891,CVE-2018-1000654 Description: This update for libtasn1 fixes the following issues: Security issues fixed: - CVE-2018-1000654: Fixed a denial of service in the asn1 parser (bsc#1105435). - CVE-2017-6891: Fixed a stack overflow in asn1_find_node() (bsc#1040621). ----------------------------------------- Patch: SUSE-2019-1431 Released: Wed Jun 5 16:50:13 2019 Summary: Recommended update for xz Severity: moderate References: 1135709 Description: This update for xz does only update the license: - Add SUSE-Public-Domain license as some parts of xz utils (liblzma, xz, xzdec, lzmadec, documentation, translated messages, tests, debug, extra directory) are in public domain license (bsc#1135709) ----------------------------------------- Patch: SUSE-2019-1475 Released: Wed Jun 12 14:46:33 2019 Summary: Recommended update for permissions Severity: moderate References: 1110797 Description: This update for permissions fixes the following issues: - Updated permissons for amanda (bsc#1110797) ----------------------------------------- Patch: SUSE-2019-1516 Released: Mon Jun 17 11:04:15 2019 Summary: Recommended update for e2fsprogs Severity: moderate References: 1128383 Description: This update for e2fsprogs fixes the following issues: - e2fsck: Check and fix tails of all bitmap blocks. (bsc#1128383) ----------------------------------------- Patch: SUSE-2019-1589 Released: Thu Jun 20 19:49:46 2019 Summary: Recommended update for permissions Severity: moderate References: 1128598 Description: This update for permissions fixes the following issues: - Added whitelisting for /usr/lib/singularity/bin/starter-suid in the new singularity 3.1 version. (bsc#1128598) ----------------------------------------- Patch: SUSE-2019-1716 Released: Thu Jun 27 13:15:38 2019 Summary: Security update for glibc Severity: moderate References: 1117993,1132678,941234,CVE-2015-5180 Description: This update for glibc fixes the following issues: Security issue fixed: - CVE-2015-5180: Fixed a NULL pointer dereference with internal QTYPE (bsc#941234). Feature work: - IBM zSeries arch13 hardware support in glibc added (fate#327072, bsc#1132678) Other issue addressed: - Fixed a concurrency issue with ldconfig (bsc#1117993). ----------------------------------------- Patch: SUSE-2019-1733 Released: Wed Jul 3 13:54:39 2019 Summary: Security update for elfutils Severity: low References: 1030472,1030476,1033084,1033085,1033087,1033088,1033089,1033090,1106390,1107067,1111973,1112723,1112726,1123685,1125007,CVE-2016-10254,CVE-2016-10255,CVE-2017-7607,CVE-2017-7608,CVE-2017-7610,CVE-2017-7611,CVE-2017-7612,CVE-2017-7613,CVE-2018-16062,CVE-2018-16403,CVE-2018-18310,CVE-2018-18520,CVE-2018-18521,CVE-2019-7150,CVE-2019-7665 Description: This update for elfutils fixes the following issues: Security issues fixed: - CVE-2018-16403: Fixed a heap-based buffer over-read that could have led to Denial of Service (bsc#1107067). - CVE-2016-10254: Fixed a memory allocation failure in alloxate_elf (bsc#1030472). - CVE-2019-7665: NT_PLATFORM core file note should be a zero terminated string (bsc#1125007). - CVE-2016-10255: Fixed a memory allocation failure in libelf_set_rawdata_wrlock (bsc#1030476). - CVE-2019-7150: Added a missing check in dwfl_segment_report_module which could have allowed truncated files to be read (bsc#1123685). - CVE-2018-16062: Fixed a heap-buffer-overflow (bsc#1106390). - CVE-2017-7611: Fixed a heap-based buffer over-read that could have led to Denial of Service (bsc#1033088). - CVE-2017-7613: Fixed denial of service caused by the missing validation of the number of sections and the number of segments in a crafted ELF file (bsc#1033090). - CVE-2017-7607: Fixed a heap-based buffer overflow in handle_gnu_hash (bsc#1033084). - CVE-2017-7608: Fixed a heap-based buffer overflow in ebl_object_note_type_name() (bsc#1033085). - CVE-2017-7610: Fixed a heap-based buffer overflow in check_group (bsc#1033087). - CVE-2018-18521: Fixed multiple divide-by-zero vulnerabilities in function arlib_add_symbols() (bsc#1112723). - CVE-2017-7612: Fixed a denial of service in check_sysv_hash() via a crafted ELF file (bsc#1033089). - CVE-2018-18310: Fixed an invalid address read in dwfl_segment_report_module.c (bsc#1111973). - CVE-2018-18520: Fixed bad handling of ar files inside are files (bsc#1112726). ----------------------------------------- Patch: SUSE-2019-1834 Released: Fri Jul 12 17:55:14 2019 Summary: Security update for expat Severity: moderate References: 1139937,CVE-2018-20843 Description: This update for expat fixes the following issues: Security issue fixed: - CVE-2018-20843: Fixed a denial of service triggered by high resource consumption in the XML parser when XML names contain a large amount of colons (bsc#1139937). ----------------------------------------- Patch: SUSE-2019-1844 Released: Mon Jul 15 07:13:09 2019 Summary: Recommended update for pam Severity: low References: 1116544 Description: This update for pam fixes the following issues: - restricted the number of file descriptors to close to a more sensible number based upon resource limits (bsc#1116544) ----------------------------------------- Patch: SUSE-2019-1896 Released: Thu Jul 18 16:26:45 2019 Summary: Security update for libxml2 Severity: moderate References: 1010675,1110146,1126613,CVE-2016-9318 Description: This update for libxml2 fixes the following issues: Issue fixed: - Fixed a bug related to the fix for CVE-2016-9318 which allowed xsltproc to access the internet even when --nonet was given and also was making docbook-xsl-stylesheets to have incomplete xml catalog file (bsc#1010675, bsc#1126613 and bsc#1110146). ----------------------------------------- Patch: SUSE-2019-1955 Released: Tue Jul 23 11:42:41 2019 Summary: Security update for bzip2 Severity: important References: 1139083,985657,CVE-2016-3189,CVE-2019-12900 Description: This update for bzip2 fixes the following issues: Security issue fixed: - CVE-2019-12900: Fixed an out-of-bounds write in decompress.c with many selectors (bsc#1139083). - CVE-2016-3189: Fixed a use-after-free in bzip2recover (bsc#985657). ----------------------------------------- Patch: SUSE-2019-1972 Released: Thu Jul 25 15:00:03 2019 Summary: Security update for libsolv, libzypp, zypper Severity: moderate References: 1109893,1110542,1111319,1112911,1113296,1120629,1120630,1120631,1127155,1131823,1134226,1137977,CVE-2018-20532,CVE-2018-20533,CVE-2018-20534 Description: This update for libsolv, libzypp and zypper fixes the following issues: libsolv was updated to version 0.6.36 fixes the following issues: Security issues fixed: - CVE-2018-20532: Fixed a NULL pointer dereference in testcase_read() (bsc#1120629). - CVE-2018-20533: Fixed a NULL pointer dereference in testcase_str2dep_complex() (bsc#1120630). - CVE-2018-20534: Fixed a NULL pointer dereference in pool_whatprovides() (bsc#1120631). Non-security issues fixed: - Made cleandeps jobs on patterns work (bsc#1137977). - Fixed an issue multiversion packages that obsolete their own name (bsc#1127155). - Keep consistent package name if there are multiple alternatives (bsc#1131823). libzypp received following fixes: - Fixes a bug where locking the kernel was not possible (bsc#1113296) zypper received following fixes: - Fixes a bug where the wrong exit code was set when refreshing repos if --root was used (bsc#1134226) - Improved the displaying of locks (bsc#1112911) - Fixes an issue where `https` repository urls caused an error prompt to appear twice (bsc#1110542) - zypper will now always warn when no repositories are defined (bsc#1109893) ----------------------------------------- Patch: SUSE-2019-2009 Released: Mon Jul 29 14:44:44 2019 Summary: Security update for curl Severity: important References: 1135170,CVE-2019-5436 Description: This update for curl fixes the following issues: Security issue fixed: - CVE-2019-5436: Fixed a heap buffer overflow in tftp_receive_packet() (bsc#1135170). ----------------------------------------- Patch: SUSE-2019-2013 Released: Mon Jul 29 15:42:41 2019 Summary: Security update for bzip2 Severity: important References: 1139083,CVE-2019-12900 Description: This update for bzip2 fixes the following issues: - Fixed a regression with the fix for CVE-2019-12900, which caused incompatibilities with files that used many selectors (bsc#1139083). ----------------------------------------- Patch: SUSE-2019-2120 Released: Wed Aug 14 11:17:39 2019 Summary: Recommended update for pam Severity: moderate References: 1136298,SLE-7257 Description: This update for pam fixes the following issues: - Enable pam_userdb.so (SLE-7257,bsc#1136298) - Upgraded pam_userdb to 1.3.1. (bsc#1136298)