SUSE Container Update Advisory: harbor/harbor-notary-signer ----------------------------------------------------------------- Container Advisory ID : SUSE-CU-2020:534-1 Container Tags : harbor/harbor-notary-signer:2.0.3 , harbor/harbor-notary-signer:2.0.3-rev1 , harbor/harbor-notary-signer:2.0.3-rev1-build1.1 Container Release : 1.1 Severity : important Type : security References : 1005023 1007715 1009532 1011548 1013125 1033084 1033085 1033086 1033087 1033088 1033089 1033090 1036463 1038194 1039099 1044840 1045723 1051143 1063675 1065270 1071321 1072183 1073313 1076696 1080919 1081947 1081947 1082293 1082318 1082318 1083158 1084671 1084812 1084842 1084934 1085196 1087550 1087982 1088052 1088279 1088524 1089640 1089761 1090944 1091265 1091677 1092100 1092877 1092920 1093753 1093753 1093851 1094150 1094154 1094161 1094222 1095096 1095661 1095670 1095973 1096191 1096718 1096745 1096974 1096984 1097073 1098569 1100369 1100396 1100488 1101040 1101470 1101591 1102046 1102310 1102526 1102564 1102840 1102908 1103320 1103320 1104531 1105031 1105166 1105435 1106214 1106383 1106390 1107066 1107067 1107617 1107640 1107941 1109160 1109197 1109252 1110304 1110445 1110700 1111019 1111388 1111498 1111973 1112024 1112570 1112723 1112726 1113083 1113632 1113665 1114135 1114407 1114592 1114674 1114675 1114681 1114686 1114845 1114933 1114984 1114993 1115640 1115929 1117025 1117063 1117993 1118086 1118364 1118367 1118368 1119687 1119971 1120323 1120346 1120689 1121197 1121563 1121563 1121753 1122000 1122417 1122729 1123043 1123333 1123685 1123710 1123727 1123892 1123919 1124122 1124153 1124223 1124847 1125007 1125352 1125352 1125410 1125604 1125886 1126056 1126096 1126117 1126118 1126119 1126377 1126590 1127223 1127308 1127557 1127701 1128220 1128246 1128383 1129576 1129598 1130045 1130230 1130325 1130326 1131060 1131330 1131686 1132348 1132400 1132721 1133297 1133495 1133506 1133509 1133773 1133808 1134193 1134217 1134524 1135123 1135254 1135534 1135708 1135709 1136717 1137053 1137624 1138793 1138869 1138939 1139083 1139083 1139459 1139459 1139939 1140631 1140647 1141059 1141093 1141113 1141883 1141897 1142649 1142654 1142733 1143055 1143194 1143273 1144047 1145023 1145716 1146866 1146991 1148517 1148987 1149145 1149332 1149911 1149995 1150137 1150595 1151023 1151023 1151377 1151582 1151708 1152101 1152590 1152692 1152755 1153936 1153943 1153946 1154036 1154037 1154256 1154295 1154661 1154871 1154884 1154887 1155199 1155207 1155271 1155327 1155337 1155338 1155339 1155574 1156205 1156213 1156482 1156913 1157051 1157278 1157292 1157315 1157794 1157893 1158095 1158095 1158336 1158485 1158830 1158921 1158996 1159814 1159928 1160039 1160571 1160595 1160735 1160970 1160979 1161168 1161215 1161216 1161218 1161219 1161220 1161239 1161262 1161436 1161517 1161521 1162108 1162108 1162518 1162698 1162930 1163184 1164505 1164538 1164562 1164717 1164950 1164950 1165011 1165424 1165539 1165579 1165784 1166106 1166260 1166510 1166510 1166748 1166881 1167631 1167674 1167898 1168076 1168235 1168345 1168389 1168699 1169357 1169488 1169512 1169569 1169944 1169947 1170527 1170667 1170713 1170771 1170801 1170964 1171145 1171313 1171740 1171762 1171863 1171864 1171866 1171872 1171878 1172021 1172072 1172085 1172195 1172348 1172396 1172477 1172698 1172704 1172824 1172925 1172958 1173026 1173027 1173106 1173227 1173229 1173273 1173307 1173311 1173336 1173422 1173470 1173529 1173539 1173582 1173983 1174011 1174079 1174154 1174240 1174551 1174561 1174673 1174736 1174918 1175109 1175342 1175443 1175568 1175592 1175811 1175830 1175831 1175844 1176086 1176092 1176179 1176181 1176410 1176671 1176674 1177143 1177479 353876 906079 915402 918346 953659 960273 985657 991901 CVE-2009-5155 CVE-2015-0247 CVE-2015-1572 CVE-2016-10739 CVE-2016-3189 CVE-2017-17740 CVE-2017-18269 CVE-2017-3136 CVE-2017-7607 CVE-2017-7608 CVE-2017-7609 CVE-2017-7610 CVE-2017-7611 CVE-2017-7612 CVE-2017-7613 CVE-2018-1000654 CVE-2018-1000858 CVE-2018-10360 CVE-2018-1122 CVE-2018-1123 CVE-2018-11236 CVE-2018-11237 CVE-2018-1124 CVE-2018-1125 CVE-2018-1126 CVE-2018-12015 CVE-2018-12020 CVE-2018-14404 CVE-2018-14567 CVE-2018-15686 CVE-2018-15688 CVE-2018-16062 CVE-2018-16402 CVE-2018-16403 CVE-2018-16864 CVE-2018-16865 CVE-2018-16866 CVE-2018-16869 CVE-2018-17953 CVE-2018-18310 CVE-2018-18311 CVE-2018-18312 CVE-2018-18313 CVE-2018-18314 CVE-2018-18520 CVE-2018-18521 CVE-2018-19211 CVE-2018-20346 CVE-2018-5741 CVE-2018-6954 CVE-2018-9251 CVE-2019-12290 CVE-2019-12900 CVE-2019-12900 CVE-2019-12904 CVE-2019-13050 CVE-2019-13057 CVE-2019-13565 CVE-2019-13627 CVE-2019-14250 CVE-2019-14866 CVE-2019-14889 CVE-2019-14889 CVE-2019-15847 CVE-2019-16168 CVE-2019-17543 CVE-2019-17594 CVE-2019-17595 CVE-2019-18218 CVE-2019-18224 CVE-2019-19126 CVE-2019-19956 CVE-2019-19956 CVE-2019-20386 CVE-2019-20388 CVE-2019-3842 CVE-2019-3843 CVE-2019-3844 CVE-2019-3880 CVE-2019-5021 CVE-2019-5094 CVE-2019-5188 CVE-2019-6454 CVE-2019-6454 CVE-2019-6477 CVE-2019-6706 CVE-2019-7150 CVE-2019-7665 CVE-2019-8905 CVE-2019-8906 CVE-2019-8907 CVE-2019-9169 CVE-2019-9936 CVE-2019-9937 CVE-2020-10029 CVE-2020-10543 CVE-2020-10878 CVE-2020-11501 CVE-2020-12243 CVE-2020-12723 CVE-2020-15719 CVE-2020-1712 CVE-2020-1712 CVE-2020-1730 CVE-2020-1752 CVE-2020-24659 CVE-2020-24977 CVE-2020-25219 CVE-2020-26154 CVE-2020-7595 CVE-2020-8023 CVE-2020-8027 CVE-2020-8169 CVE-2020-8177 CVE-2020-8231 CVE-2020-8616 CVE-2020-8617 CVE-2020-8618 CVE-2020-8619 CVE-2020-8620 CVE-2020-8621 CVE-2020-8622 CVE-2020-8623 CVE-2020-8624 SLE-5807 SLE-5933 SLE-6533 SLE-6536 SLE-7687 SLE-9132 ----------------------------------------------------------------- The container harbor/harbor-notary-signer was updated. The following patches have been included in this update: ----------------------------------------------------------------- Advisory ID: SUSE-SU-2018:1223-1 Released: Tue Jun 26 11:41:00 2018 Summary: Security update for gpg2 Type: security Severity: important References: 1096745,CVE-2018-12020 This update for gpg2 fixes the following security issue: - CVE-2018-12020: GnuPG mishandled the original filename during decryption and verification actions, which allowed remote attackers to spoof the output that GnuPG sends on file descriptor 2 to other programs that use the '--status-fd 2' option (bsc#1096745). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2018:1327-1 Released: Tue Jul 17 08:07:24 2018 Summary: Security update for perl Type: security Severity: moderate References: 1096718,CVE-2018-12015 This update for perl fixes the following issues: - CVE-2018-12015: The Archive::Tar module allowed remote attackers to bypass a directory-traversal protection mechanism and overwrite arbitrary files (bsc#1096718) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2018:1346-1 Released: Thu Jul 19 09:25:08 2018 Summary: Security update for glibc Type: security Severity: moderate References: 1082318,1092877,1094150,1094154,1094161,CVE-2017-18269,CVE-2018-11236,CVE-2018-11237 This update for glibc fixes the following security issues: - CVE-2017-18269: An SSE2-optimized memmove implementation for i386 did not correctly perform the overlapping memory check if the source memory range spaned the middle of the address space, resulting in corrupt data being produced by the copy operation. This may have disclosed information to context-dependent attackers, resulted in a denial of service or code execution (bsc#1094150). - CVE-2018-11236: Prevent integer overflow on 32-bit architectures when processing very long pathname arguments to the realpath function, leading to a stack-based buffer overflow (bsc#1094161). - CVE-2018-11237: An AVX-512-optimized implementation of the mempcpy function may have writen data beyond the target buffer, leading to a buffer overflow in __mempcpy_avx512_no_vzeroupper (bsc#1092877, bsc#1094154). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2018:1353-1 Released: Thu Jul 19 09:50:32 2018 Summary: Security update for e2fsprogs Type: security Severity: moderate References: 1009532,1038194,915402,918346,960273,CVE-2015-0247,CVE-2015-1572 This update for e2fsprogs fixes the following issues: Security issues fixed: - CVE-2015-0247: Fixed couple of heap overflows in e2fsprogs (fsck, dumpe2fs, e2image...) (bsc#915402). - CVE-2015-1572: Fixed potential buffer overflow in closefs() (bsc#918346). Bug fixes: - bsc#1038194: generic/405 test fails with /dev/mapper/thin-vol is inconsistent on ext4 file system. - bsc#1009532: resize2fs hangs when trying to resize a large ext4 file system. - bsc#960273: xfsprogs does not call %{?regenerate_initrd_post}. ----------------------------------------------------------------- Advisory ID: SUSE-RU-2018:1409-1 Released: Fri Jul 27 06:45:10 2018 Summary: Recommended update for systemd Type: recommended Severity: moderate References: 1039099,1083158,1088052,1091265,1093851,1095096,1095973,1098569 This update for systemd provides the following fixes: - systemctl: Mask always reports the same unit names when different unknown units are passed. (bsc#1095973) - systemctl: Check the existence of all units, not just the first one. - scsi_id: Fix the prefix for pre-SPC inquiry reply. (bsc#1039099) - device: Make sure to always retroactively start device dependencies. (bsc#1088052) - locale-util: On overlayfs FTW_MOUNT causes nftw(3) to not list *any* files. - Fix pattern to detect distribution. - install: The 'user' and 'global' scopes are equivalent for user presets. (bsc#1093851) - install: Search for preset files in /run (#7715) - install: Consider globally enabled units as 'enabled' for the user. (bsc#1093851) - install: Consider non-Alias=/non-DefaultInstance= symlinks as 'indirect' enablement. - install: Only consider names in Alias= as 'enabling'. - udev: Whitelist mlx4_core locally-administered MAC addresses in the persistent rule generator. (bsc#1083158) - man: Updated systemd-analyze blame description for service-units with Type=simple. (bsc#1091265) - fileio: Support writing atomic files with timestamp. - fileio.c: Fix incorrect mtime - Drop runtime dependency on dracut, otherwise systemd pulls in tools to generate the initrd even in container/chroot installations that don't have a kernel. For environments where initrd matters, dracut should be pulled via a pattern. (bsc#1098569) - An update broke booting with encrypted partitions on NVMe (bsc#1095096) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2018:1760-1 Released: Fri Aug 24 17:14:53 2018 Summary: Recommended update for libtirpc Type: recommended Severity: moderate References: 1072183 This update for libtirpc fixes the following issues: - rpcinfo: send RPC getport call as specified via parameter (bsc#1072183) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2018:1999-1 Released: Tue Sep 25 08:20:35 2018 Summary: Recommended update for zlib Type: recommended Severity: moderate References: 1071321 This update for zlib provides the following fixes: - Speedup zlib on power8. (fate#325307) - Add safeguard against negative values in uInt. (bsc#1071321) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2018:2055-1 Released: Thu Sep 27 14:30:14 2018 Summary: Recommended update for openldap2 Type: recommended Severity: moderate References: 1089640 This update for openldap2 provides the following fix: - Fix slapd segfaults in mdb_env_reader_dest. (bsc#1089640) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2018:2155-1 Released: Fri Oct 5 14:41:17 2018 Summary: Recommended update for ca-certificates Type: recommended Severity: moderate References: 1101470 This update for ca-certificates fixes the following issues: - Changed 'openssl' requirement to 'openssl(cli)' (bsc#1101470) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2018:2177-1 Released: Tue Oct 9 09:00:13 2018 Summary: Recommended update for bash Type: recommended Severity: moderate References: 1095661,1095670,1100488 This update for bash provides the following fixes: - Bugfix: Parse settings in inputrc for all screen TERM variables starting with 'screen.' (bsc#1095661) - Make the generation of bash.html reproducible. (bsc#1100488) - Use initgroups(3) instead of setgroups(2) to fix the usage of suid programs. (bsc#1095670) - Fix a problem that could cause hash table bash uses to store exit statuses from asynchronous processes to develop loops in circumstances involving long-running scripts that create and reap many processes. - Fix a problem that could cause the shell to loop if a SIGINT is received inside of a SIGINT trap handler. - Fix cases where a failing readline command (e.g., delete-char at the end of a line) can cause a multi-character key sequence to 'back up' and attempt to re-read some of the characters in the sequence. - Fix a problem when sourcing a file from an interactive shell, that setting the SIGINT handler to the default and typing ^C would cause the shell to exit. ----------------------------------------------------------------- Advisory ID: SUSE-SU-2018:2182-1 Released: Tue Oct 9 11:08:36 2018 Summary: Security update for libxml2 Type: security Severity: moderate References: 1088279,1102046,1105166,CVE-2018-14404,CVE-2018-14567,CVE-2018-9251 This update for libxml2 fixes the following security issues: - CVE-2018-9251: The xz_decomp function allowed remote attackers to cause a denial of service (infinite loop) via a crafted XML file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint (bsc#1088279) - CVE-2018-14567: Prevent denial of service (infinite loop) via a crafted XML file that triggers LZMA_MEMLIMIT_ERROR, as demonstrated by xmllint (bsc#1105166) - CVE-2018-14404: Prevent NULL pointer dereference in the xmlXPathCompOpEval() function when parsing an invalid XPath expression in the XPATH_OP_AND or XPATH_OP_OR case leading to a denial of service attack (bsc#1102046) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2018:2370-1 Released: Mon Oct 22 14:02:01 2018 Summary: Recommended update for aaa_base Type: recommended Severity: moderate References: 1102310,1104531 This update for aaa_base provides the following fixes: - Let bash.bashrc work even for (m)ksh. (bsc#1104531) - Fix an error at login if java system directory is empty. (bsc#1102310) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2018:2487-1 Released: Fri Oct 26 12:39:07 2018 Summary: Recommended update for glibc Type: recommended Severity: moderate References: 1102526 This update for glibc fixes the following issues: - Fix build on aarch64 with binutils newer than 2.30. - Fix year 2039 bug for localtime with 64-bit time_t (bsc#1102526) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2018:2569-1 Released: Fri Nov 2 19:00:18 2018 Summary: Recommended update for pam Type: recommended Severity: moderate References: 1110700 This update for pam fixes the following issues: - Remove limits for nproc from /etc/security/limits.conf (bsc#1110700) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2018:2595-1 Released: Wed Nov 7 11:14:42 2018 Summary: Security update for systemd Type: security Severity: important References: 1089761,1090944,1091677,1093753,1101040,1102908,1105031,1107640,1107941,1109197,1109252,1110445,1112024,1113083,1113632,1113665,1114135,991901,CVE-2018-15686,CVE-2018-15688 This update for systemd fixes the following issues: Security issues fixed: - CVE-2018-15688: A buffer overflow vulnerability in the dhcp6 client of systemd allowed a malicious dhcp6 server to overwrite heap memory in systemd-networkd. (bsc#1113632) - CVE-2018-15686: A vulnerability in unit_deserialize of systemd allows an attacker to supply arbitrary state across systemd re-execution via NotifyAccess. This can be used to improperly influence systemd execution and possibly lead to root privilege escalation. (bsc#1113665) Non security issues fixed: - dhcp6: split assert_return() to be more debuggable when hit - core: skip unit deserialization and move to the next one when unit_deserialize() fails - core: properly handle deserialization of unknown unit types (#6476) - core: don't create Requires for workdir if 'missing ok' (bsc#1113083) - logind: use manager_get_user_by_pid() where appropriate - logind: rework manager_get_{user|session}_by_pid() a bit - login: fix user@.service case, so we don't allow nested sessions (#8051) (bsc#1112024) - core: be more defensive if we can't determine per-connection socket peer (#7329) - core: introduce systemd.early_core_pattern= kernel cmdline option - core: add missing 'continue' statement - core/mount: fstype may be NULL - journald: don't ship systemd-journald-audit.socket (bsc#1109252) - core: make 'tmpfs' dependencies on swapfs a 'default' dep, not an 'implicit' (bsc#1110445) - mount: make sure we unmount tmpfs mounts before we deactivate swaps (#7076) - detect-virt: do not try to read all of /proc/cpuinfo (bsc#1109197) - emergency: make sure console password agents don't interfere with the emergency shell - man: document that 'nofail' also has an effect on ordering - journald: take leading spaces into account in syslog_parse_identifier - journal: do not remove multiple spaces after identifier in syslog message - syslog: fix segfault in syslog_parse_priority() - journal: fix syslog_parse_identifier() - install: drop left-over debug message (#6913) - Ship systemd-sysv-install helper via the main package This script was part of systemd-sysvinit sub-package but it was wrong since systemd-sysv-install is a script used to redirect enable/disable operations to chkconfig when the unit targets are sysv init scripts. Therefore it's never been a SySV init tool. - Add udev.no-partlabel-links kernel command-line option. This option can be used to disable the generation of the by-partlabel symlinks regardless of the name used. (bsc#1089761) - man: SystemMaxUse= clarification in journald.conf(5). (bsc#1101040) - systemctl: load unit if needed in 'systemctl is-active' (bsc#1102908) - core: don't freeze OnCalendar= timer units when the clock goes back a lot (bsc#1090944) - Enable or disable machines.target according to the presets (bsc#1107941) - cryptsetup: add support for sector-size= option (fate#325697) - nspawn: always use permission mode 555 for /sys (bsc#1107640) - Bugfix for a race condition between daemon-reload and other commands (bsc#1105031) - Fixes an issue where login with root credentials was not possible in init level 5 (bsc#1091677) - Fix an issue where services of type 'notify' harmless DENIED log entries. (bsc#991901) - Does no longer adjust qgroups on existing subvolumes (bsc#1093753) - cryptsetup: add support for sector-size= option (#9936) (fate#325697 bsc#1114135) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2018:2607-1 Released: Wed Nov 7 15:42:48 2018 Summary: Optional update for gcc8 Type: recommended Severity: low References: 1084812,1084842,1087550,1094222,1102564 The GNU Compiler GCC 8 is being added to the Development Tools Module by this update. The update also supplies gcc8 compatible libstdc++, libgcc_s1 and other gcc derived libraries for the Basesystem module of SUSE Linux Enterprise 15. Various optimizers have been improved in GCC 8, several of bugs fixed, quite some new warnings added and the error pin-pointing and fix-suggestions have been greatly improved. The GNU Compiler page for GCC 8 contains a summary of all the changes that have happened: https://gcc.gnu.org/gcc-8/changes.html Also changes needed or common pitfalls when porting software are described on: https://gcc.gnu.org/gcc-8/porting_to.html ----------------------------------------------------------------- Advisory ID: SUSE-SU-2018:2825-1 Released: Mon Dec 3 15:35:02 2018 Summary: Security update for pam Type: security Severity: important References: 1115640,CVE-2018-17953 This update for pam fixes the following issue: Security issue fixed: - CVE-2018-17953: Fixed IP address and subnet handling of pam_access.so that was not honoured correctly when a single host was specified (bsc#1115640). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2018:2861-1 Released: Thu Dec 6 14:32:01 2018 Summary: Security update for ncurses Type: security Severity: important References: 1103320,1115929,CVE-2018-19211 This update for ncurses fixes the following issues: Security issue fixed: - CVE-2018-19211: Fixed denial of service issue that was triggered by a NULL pointer dereference at function _nc_parse_entry (bsc#1115929). Non-security issue fixed: - Remove scree.xterm from terminfo data base as with this screen uses fallback TERM=screen (bsc#1103320). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2018:2984-1 Released: Wed Dec 19 11:32:39 2018 Summary: Security update for perl Type: security Severity: moderate References: 1114674,1114675,1114681,1114686,CVE-2018-18311,CVE-2018-18312,CVE-2018-18313,CVE-2018-18314 This update for perl fixes the following issues: Secuirty issues fixed: - CVE-2018-18311: Fixed integer overflow with oversize environment (bsc#1114674). - CVE-2018-18312: Fixed heap-buffer-overflow write / reg_node overrun (bsc#1114675). - CVE-2018-18313: Fixed heap-buffer-overflow read if regex contains \0 chars (bsc#1114681). - CVE-2018-18314: Fixed heap-buffer-overflow in regex (bsc#1114686). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2018:2986-1 Released: Wed Dec 19 13:53:22 2018 Summary: Security update for libnettle Type: security Severity: moderate References: 1118086,CVE-2018-16869 This update for libnettle fixes the following issues: Security issues fixed: - CVE-2018-16869: Fixed a leaky data conversion exposing a manager oracle (bsc#1118086) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:23-1 Released: Mon Jan 7 16:30:33 2019 Summary: Security update for gpg2 Type: security Severity: moderate References: 1120346,CVE-2018-1000858 This update for gpg2 fixes the following issue: Security issue fixed: - CVE-2018-1000858: Fixed a Cross Site Request Forgery(CSRF) vulnerability in dirmngr that can result in Attacker controlled CSRF (bsc#1120346). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:44-1 Released: Tue Jan 8 13:07:32 2019 Summary: Recommended update for acl Type: recommended Severity: low References: 953659 This update for acl fixes the following issues: - test: Add helper library to fake passwd/group files. - quote: Escape literal backslashes. (bsc#953659) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:137-1 Released: Mon Jan 21 15:52:45 2019 Summary: Security update for systemd Type: security Severity: important References: 1005023,1045723,1076696,1080919,1093753,1101591,1111498,1114933,1117063,1119971,1120323,CVE-2018-16864,CVE-2018-16865,CVE-2018-16866,CVE-2018-6954 This update for systemd provides the following fixes: Security issues fixed: - CVE-2018-16864, CVE-2018-16865: Fixed two memory corruptions through attacker-controlled alloca()s (bsc#1120323) - CVE-2018-16866: Fixed an information leak in journald (bsc#1120323) - CVE-2018-6954: Fix mishandling of symlinks present in non-terminal path components (bsc#1080919) - Fixed an issue during system startup in relation to encrypted swap disks (bsc#1119971) Non-security issues fixed: - pam_systemd: Fix 'Cannot create session: Already running in a session' (bsc#1111498) - systemd-vconsole-setup: vconsole setup fails, fonts will not be copied to tty (bsc#1114933) - systemd-tmpfiles-setup: symlinked /tmp to /var/tmp breaking multiple units (bsc#1045723) - Fixed installation issue with /etc/machine-id during update (bsc#1117063) - btrfs: qgroups are assigned to parent qgroups after reboot (bsc#1093753) - logind: Stop managing VT switches if no sessions are registered on that VT. (bsc#1101591) - udev: Downgrade message when settting inotify watch up fails. (bsc#1005023) - udev: Ignore the exit code of systemd-detect-virt for memory hot-add. In SLE-12-SP3, 80-hotplug-cpu-mem.rules has a memory hot-add rule that uses systemd-detect-virt to detect non-zvm environment. The systemd-detect-virt returns exit failure code when it detected _none_ state. The exit failure code causes that the hot-add memory block can not be set to online. (bsc#1076696) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:247-1 Released: Wed Feb 6 07:18:45 2019 Summary: Security update for lua53 Type: security Severity: moderate References: 1123043,CVE-2019-6706 This update for lua53 fixes the following issues: Security issue fixed: - CVE-2019-6706: Fixed a use-after-free bug in the lua_upvaluejoin function of lapi.c (bsc#1123043) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:369-1 Released: Wed Feb 13 14:01:42 2019 Summary: Recommended update for itstool Type: recommended Severity: moderate References: 1065270,1111019 This update for itstool and python-libxml2-python fixes the following issues: Package: itstool - Updated version to support Python3. (bnc#1111019) Package: python-libxml2-python - Fix segfault when parsing invalid data. (bsc#1065270) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:426-1 Released: Mon Feb 18 17:46:55 2019 Summary: Security update for systemd Type: security Severity: important References: 1117025,1121563,1122000,1123333,1123727,1123892,1124153,1125352,CVE-2019-6454 This update for systemd fixes the following issues: - CVE-2019-6454: Overlong DBUS messages could be used to crash systemd (bsc#1125352) - units: make sure initrd-cleanup.service terminates before switching to rootfs (bsc#1123333) - logind: fix bad error propagation - login: log session state 'closing' (as well as New/Removed) - logind: fix borked r check - login: don't remove all devices from PID1 when only one was removed - login: we only allow opening character devices - login: correct comment in session_device_free() - login: remember that fds received from PID1 need to be removed eventually - login: fix FDNAME in call to sd_pid_notify_with_fds() - logind: fd 0 is a valid fd - logind: rework sd_eviocrevoke() - logind: check file is device node before using .st_rdev - logind: use the new FDSTOREREMOVE=1 sd_notify() message (bsc#1124153) - core: add a new sd_notify() message for removing fds from the FD store again - logind: make sure we don't trip up on half-initialized session devices (bsc#1123727) - fd-util: accept that kcmp might fail with EPERM/EACCES - core: Fix use after free case in load_from_path() (bsc#1121563) - core: include Found state in device dumps - device: fix serialization and deserialization of DeviceFound - fix path in btrfs rule (#6844) - assemble multidevice btrfs volumes without external tools (#6607) (bsc#1117025) - Update systemd-system.conf.xml (bsc#1122000) - units: inform user that the default target is started after exiting from rescue or emergency mode - core: free lines after reading them (bsc#1123892) - sd-bus: if we receive an invalid dbus message, ignore and proceeed - automount: don't pass non-blocking pipe to kernel. ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:571-1 Released: Thu Mar 7 18:13:46 2019 Summary: Security update for file Type: security Severity: moderate References: 1096974,1096984,1126117,1126118,1126119,CVE-2018-10360,CVE-2019-8905,CVE-2019-8906,CVE-2019-8907 This update for file fixes the following issues: The following security vulnerabilities were addressed: - CVE-2018-10360: Fixed an out-of-bounds read in the function do_core_note in readelf.c, which allowed remote attackers to cause a denial of service (application crash) via a crafted ELF file (bsc#1096974) - CVE-2019-8905: Fixed a stack-based buffer over-read in do_core_note in readelf.c (bsc#1126118) - CVE-2019-8906: Fixed an out-of-bounds read in do_core_note in readelf. c (bsc#1126119) - CVE-2019-8907: Fixed a stack corruption in do_core_note in readelf.c (bsc#1126117) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:641-1 Released: Tue Mar 19 13:17:28 2019 Summary: Recommended update for glibc Type: recommended Severity: moderate References: 1112570,1114984,1114993 This update for glibc provides the following fixes: - Fix Haswell CPU string flags. (bsc#1114984) - Fix waiters-after-spinning case. (bsc#1114993) - Do not relocate absolute symbols. (bsc#1112570) - Add glibc-locale-base subpackage containing only C, C.UTF-8 and en_US.UTF-8 locales. (fate#326551) - Add HWCAP_ATOMICS to HWCAP_IMPORTANT (fate#325962) - Remove slow paths from math routines. (fate#325815, fate#325879, fate#325880, fate#325881, fate#325882) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:700-1 Released: Thu Mar 21 19:54:00 2019 Summary: Recommended update for cyrus-sasl Type: recommended Severity: moderate References: 1044840 This update for cyrus-sasl provides the following fix: - Fix a problem that was causing syslog to be polluted with messages 'GSSAPI client step 1'. By server context the connection will be sent to the log function but the client content does not have log level information, so there is no way to stop DEBUG level logs. (bsc#1044840) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:713-1 Released: Fri Mar 22 15:55:05 2019 Summary: Recommended update for glibc Type: recommended Severity: moderate References: 1063675,1126590 This update for glibc fixes the following issues: - Add MAP_SYNC from Linux 4.15 (bsc#1126590) - Add MAP_SHARED_VALIDATE from Linux 4.15 (bsc#1126590) - nptl: Preserve error in setxid thread broadcast in coredumps (bsc#1063675, BZ #22153) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:732-1 Released: Mon Mar 25 14:10:04 2019 Summary: Recommended update for aaa_base Type: recommended Severity: moderate References: 1088524,1118364,1128246 This update for aaa_base fixes the following issues: - Restore old position of ssh/sudo source of profile (bsc#1118364). - Update logic for JRE_HOME env variable (bsc#1128246) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:788-1 Released: Thu Mar 28 11:55:06 2019 Summary: Security update for sqlite3 Type: security Severity: moderate References: 1119687,CVE-2018-20346 This update for sqlite3 to version 3.27.2 fixes the following issue: Security issue fixed: - CVE-2018-20346: Fixed a remote code execution vulnerability in FTS3 (Magellan) (bsc#1119687). Release notes: https://www.sqlite.org/releaselog/3_27_2.html ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:791-1 Released: Thu Mar 28 12:06:50 2019 Summary: Security update for libnettle Type: recommended Severity: moderate References: 1129598 This update for libnettle to version 3.4.1 fixes the following issues: Issues addressed and new features: - Updated to 3.4.1 (fate#327114 and bsc#1129598) - Fixed a missing break statements in the parsing of PEM input files in pkcs1-conv. - Fixed a link error on the pss-mgf1-test which was affecting builds without public key support. - All functions using RSA private keys are now side-channel silent. This applies both to the bignum calculations, which now use GMP's mpn_sec_* family of functions, and the processing of PKCS#1 padding needed for RSA decryption. - Changes in behavior: The functions rsa_decrypt and rsa_decrypt_tr may now clobber all of the provided message buffer, independent of the actual message length. They are side-channel silent, in that branches and memory accesses don't depend on the validity or length of the message. Side-channel leakage from the caller's use of length and return value may still provide an oracle useable for a Bleichenbacher-style chosen ciphertext attack. Which is why the new function rsa_sec_decrypt is recommended. ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:858-1 Released: Wed Apr 3 15:50:37 2019 Summary: Recommended update for libtirpc Type: recommended Severity: moderate References: 1120689,1126096 This update for libtirpc fixes the following issues: - Fix a yp_bind_client_create_v3: RPC: Unknown host error (bsc#1126096). - add an option to enforce connection via protocol version 2 first (bsc#1120689). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:903-1 Released: Mon Apr 8 15:41:44 2019 Summary: Security update for glibc Type: security Severity: moderate References: 1100396,1122729,1130045,CVE-2016-10739 This update for glibc fixes the following issues: Security issue fixed: - CVE-2016-10739: Fixed an improper implementation of getaddrinfo function which could allow applications to incorrectly assume that had parsed a valid string, without the possibility of embedded HTTP headers or other potentially dangerous substrings (bsc#1122729). Other issue fixed: - Fixed an issue where pthread_mutex_trylock did not use a correct order of instructions while maintained the robust mutex list due to missing compiler barriers (bsc#1130045). - Added new Japanese Era name support (bsc#1100396). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:1002-1 Released: Wed Apr 24 10:13:34 2019 Summary: Recommended update for zlib Type: recommended Severity: moderate References: 1110304,1129576 This update for zlib fixes the following issues: - Fixes a segmentation fault error (bsc#1110304, bsc#1129576) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:1040-1 Released: Thu Apr 25 17:09:21 2019 Summary: Security update for samba Type: security Severity: important References: 1114407,1124223,1125410,1126377,1131060,1131686,CVE-2019-3880 This update for samba fixes the following issues: Security issue fixed: - CVE-2019-3880: Fixed a path/symlink traversal vulnerability, which allowed an unprivileged user to save registry files outside a share (bsc#1131060). ldb was updated to version 1.2.4 (bsc#1125410 bsc#1131686): - Out of bound read in ldb_wildcard_compare - Hold at most 10 outstanding paged result cookies - Put 'results_store' into a doubly linked list - Refuse to build Samba against a newer minor version of ldb Non-security issues fixed: - Fixed update-apparmor-samba-profile script after apparmor switched to using named profiles (bsc#1126377). - Abide to the load_printers parameter in smb.conf (bsc#1124223). - Provide the 32bit samba winbind PAM module and its dependend 32bit libraries. ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:1127-1 Released: Thu May 2 09:39:24 2019 Summary: Security update for sqlite3 Type: security Severity: moderate References: 1130325,1130326,CVE-2019-9936,CVE-2019-9937 This update for sqlite3 to version 3.28.0 fixes the following issues: Security issues fixed: - CVE-2019-9936: Fixed a heap-based buffer over-read, when running fts5 prefix queries inside transaction (bsc#1130326). - CVE-2019-9937: Fixed a denial of service related to interleaving reads and writes in a single transaction with an fts5 virtual table (bsc#1130325). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:1206-1 Released: Fri May 10 14:01:55 2019 Summary: Security update for bzip2 Type: security Severity: low References: 985657,CVE-2016-3189 This update for bzip2 fixes the following issues: Security issue fixed: - CVE-2016-3189: Fixed a use-after-free in bzip2recover (bsc#985657). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:1312-1 Released: Wed May 22 12:19:12 2019 Summary: Recommended update for aaa_base Type: recommended Severity: moderate References: 1096191 This update for aaa_base fixes the following issue: * Shell detection in /etc/profile and /etc/bash.bashrc was broken within AppArmor-confined containers (bsc#1096191) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:1364-1 Released: Tue May 28 10:51:38 2019 Summary: Security update for systemd Type: security Severity: moderate References: 1036463,1121563,1124122,1125352,1125604,1126056,1127557,1130230,1132348,1132400,1132721,1133506,1133509,CVE-2019-3842,CVE-2019-3843,CVE-2019-3844,CVE-2019-6454,SLE-5933 This update for systemd fixes the following issues: Security issues fixed: - CVE-2019-3842: Fixed a privilege escalation in pam_systemd which could be exploited by a local user (bsc#1132348). - CVE-2019-6454: Fixed a denial of service via crafted D-Bus message (bsc#1125352). - CVE-2019-3843, CVE-2019-3844: Fixed a privilege escalation where services with DynamicUser could gain new privileges or create SUID/SGID binaries (bsc#1133506, bsc#1133509). Non-security issued fixed: - logind: fix killing of scopes (bsc#1125604) - namespace: make MountFlags=shared work again (bsc#1124122) - rules: load drivers only on 'add' events (bsc#1126056) - sysctl: Don't pass null directive argument to '%s' (bsc#1121563) - systemd-coredump: generate a stack trace of all core dumps and log into the journal (jsc#SLE-5933) - udevd: notify when max number value of children is reached only once per batch of events (bsc#1132400) - sd-bus: bump message queue size again (bsc#1132721) - Do not automatically online memory on s390x (bsc#1127557) - Removed sg.conf (bsc#1036463) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:1368-1 Released: Tue May 28 13:15:38 2019 Summary: Recommended update for sles12sp3-docker-image, sles12sp4-image, system-user-root Type: security Severity: important References: 1134524,CVE-2019-5021 This update for sles12sp3-docker-image, sles12sp4-image, system-user-root fixes the following issues: - CVE-2019-5021: Include an invalidated root password by default, not an empty one (bsc#1134524) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:1372-1 Released: Tue May 28 16:53:28 2019 Summary: Security update for libtasn1 Type: security Severity: moderate References: 1105435,CVE-2018-1000654 This update for libtasn1 fixes the following issues: Security issue fixed: - CVE-2018-1000654: Fixed a denial of service in the asn1 parser (bsc#1105435). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:1484-1 Released: Thu Jun 13 07:46:46 2019 Summary: Recommended update for e2fsprogs Type: recommended Severity: moderate References: 1128383 This update for e2fsprogs fixes the following issues: - Check and fix tails of all bitmap blocks (bsc#1128383) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:1486-1 Released: Thu Jun 13 09:40:24 2019 Summary: Security update for elfutils Type: security Severity: moderate References: 1033084,1033085,1033086,1033087,1033088,1033089,1033090,1106390,1107066,1107067,1111973,1112723,1112726,1123685,1125007,CVE-2017-7607,CVE-2017-7608,CVE-2017-7609,CVE-2017-7610,CVE-2017-7611,CVE-2017-7612,CVE-2017-7613,CVE-2018-16062,CVE-2018-16402,CVE-2018-16403,CVE-2018-18310,CVE-2018-18520,CVE-2018-18521,CVE-2019-7150,CVE-2019-7665 This update for elfutils fixes the following issues: Security issues fixed: - CVE-2017-7607: Fixed a heap-based buffer overflow in handle_gnu_hash (bsc#1033084) - CVE-2017-7608: Fixed a heap-based buffer overflow in ebl_object_note_type_name() (bsc#1033085) - CVE-2017-7609: Fixed a memory allocation failure in __libelf_decompress (bsc#1033086) - CVE-2017-7610: Fixed a heap-based buffer overflow in check_group (bsc#1033087) - CVE-2017-7611: Fixed a denial of service via a crafted ELF file (bsc#1033088) - CVE-2017-7612: Fixed a denial of service in check_sysv_hash() via a crafted ELF file (bsc#1033089) - CVE-2017-7613: Fixed denial of service caused by the missing validation of the number of sections and the number of segments in a crafted ELF file (bsc#1033090) - CVE-2018-16062: Fixed a heap-buffer overflow in /elfutils/libdw/dwarf_getaranges.c:156 (bsc#1106390) - CVE-2018-16402: Fixed a denial of service/double free on an attempt to decompress the same section twice (bsc#1107066) - CVE-2018-16403: Fixed a heap buffer overflow in readelf (bsc#1107067) - CVE-2018-18310: Fixed an invalid address read problem in dwfl_segment_report_module.c (bsc#1111973) - CVE-2018-18520: Fixed bad handling of ar files inside are files (bsc#1112726) - CVE-2018-18521: Fixed a denial of service vulnerabilities in the function arlib_add_symbols() used by eu-ranlib (bsc#1112723) - CVE-2019-7150: dwfl_segment_report_module doesn't check whether the dyn data read from core file is truncated (bsc#1123685) - CVE-2019-7665: NT_PLATFORM core file note should be a zero terminated string (bsc#1125007) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:1631-1 Released: Fri Jun 21 11:17:21 2019 Summary: Recommended update for xz Type: recommended Severity: low References: 1135709 This update for xz fixes the following issues: Add SUSE-Public-Domain licence as some parts of xz utils (liblzma, xz, xzdec, lzmadec, documentation, translated messages, tests, debug, extra directory) are in public domain licence [bsc#1135709] ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:1635-1 Released: Fri Jun 21 12:45:53 2019 Summary: Recommended update for krb5 Type: recommended Severity: moderate References: 1134217 This update for krb5 provides the following fix: - Move LDAP schema files from /usr/share/doc/packages/krb5 to /usr/share/kerberos/ldap. (bsc#1134217) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:1700-1 Released: Tue Jun 25 13:19:21 2019 Summary: Security update for libssh Type: recommended Severity: moderate References: 1134193 This update for libssh fixes the following issue: Issue addressed: - Added support for new AES-GCM encryption types (bsc#1134193). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:1808-1 Released: Wed Jul 10 13:16:29 2019 Summary: Recommended update for libgcrypt Type: recommended Severity: moderate References: 1133808 This update for libgcrypt fixes the following issues: - Fixed redundant fips tests in some situations causing sudo to stop working when pam-kwallet is installed. bsc#1133808 ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:1846-1 Released: Mon Jul 15 11:36:33 2019 Summary: Security update for bzip2 Type: security Severity: important References: 1139083,CVE-2019-12900 This update for bzip2 fixes the following issues: Security issue fixed: - CVE-2019-12900: Fixed an out-of-bounds write in decompress.c with many selectors (bsc#1139083). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:1853-1 Released: Mon Jul 15 16:03:36 2019 Summary: Recommended update for systemd Type: recommended Severity: moderate References: 1107617,1137053 This update for systemd fixes the following issues: - conf-parse: remove 4K line length limit (bsc#1137053) - udevd: change the default value of udev.children-max (again) (bsc#1107617) - meson: stop creating enablement symlinks in /etc during installation (sequel) - Fixed build for openSUSE Leap 15+ - Make sure we don't ship any static enablement symlinks in /etc Those symlinks must only be created by the presets. There are no changes in practice since systemd/udev doesn't ship such symlinks in /etc but let's make sure no future changes will introduce new ones by mistake. ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:1877-1 Released: Thu Jul 18 11:31:46 2019 Summary: Security update for glibc Type: security Severity: moderate References: 1117993,1123710,1127223,1127308,1131330,CVE-2009-5155,CVE-2019-9169 This update for glibc fixes the following issues: Security issues fixed: - CVE-2019-9169: Fixed a heap-based buffer over-read via an attempted case-insensitive regular-expression match (bsc#1127308). - CVE-2009-5155: Fixed a denial of service in parse_reg_exp() (bsc#1127223). Non-security issues fixed: - Does no longer compress debug sections in crt*.o files (bsc#1123710) - Fixes a concurrency problem in ldconfig (bsc#1117993) - Fixes a race condition in pthread_mutex_lock while promoting to PTHREAD_MUTEX_ELISION_NP (bsc#1131330) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:1971-1 Released: Thu Jul 25 14:58:52 2019 Summary: Security update for libgcrypt Type: security Severity: moderate References: 1138939,CVE-2019-12904 This update for libgcrypt fixes the following issues: Security issue fixed: - CVE-2019-12904: Fixed a flush-and-reload side-channel attack in the AES implementation (bsc#1138939). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:1994-1 Released: Fri Jul 26 16:12:05 2019 Summary: Recommended update for libxml2 Type: recommended Severity: moderate References: 1135123 This update for libxml2 fixes the following issues: - Added a new configurable variable XPATH_DEFAULT_MAX_NODESET_LENGTH to avoid nodeset limit when processing large XML files. (bsc#1135123) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:2004-1 Released: Mon Jul 29 13:01:59 2019 Summary: Security update for bzip2 Type: security Severity: important References: 1139083,CVE-2019-12900 This update for bzip2 fixes the following issues: - Fixed a regression with the fix for CVE-2019-12900, which caused incompatibilities with files that used many selectors (bsc#1139083). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:2006-1 Released: Mon Jul 29 13:02:49 2019 Summary: Security update for gpg2 Type: security Severity: important References: 1124847,1141093,CVE-2019-13050 This update for gpg2 fixes the following issues: Security issue fixed: - CVE-2019-13050: Fixed a denial of service attacks via big keys (bsc#1141093). Non-security issue fixed: - Allow coredumps in X11 desktop sessions (bsc#1124847) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:2097-1 Released: Fri Aug 9 09:31:17 2019 Summary: Recommended update for libgcrypt Type: recommended Severity: important References: 1097073 This update for libgcrypt fixes the following issues: - Fixed a regression where system were unable to boot in fips mode, caused by an incomplete implementation of previous change (bsc#1097073). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:2134-1 Released: Wed Aug 14 11:54:56 2019 Summary: Recommended update for zlib Type: recommended Severity: moderate References: 1136717,1137624,1141059,SLE-5807 This update for zlib fixes the following issues: - Update the s390 patchset. (bsc#1137624) - Tweak zlib-power8 to have type of crc32_vpmsum conform to usage. (bsc#1141059) - Use FAT LTO objects in order to provide proper static library. - Do not enable the previous patchset on s390 but just s390x. (bsc#1137624) - Add patchset for s390 improvements. (jsc#SLE-5807, bsc#1136717) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:2188-1 Released: Wed Aug 21 10:10:29 2019 Summary: Recommended update for aaa_base Type: recommended Severity: moderate References: 1140647 This update for aaa_base fixes the following issues: - Make systemd detection cgroup oblivious. (bsc#1140647) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:2218-1 Released: Mon Aug 26 11:29:57 2019 Summary: Recommended update for pinentry Type: recommended Severity: moderate References: 1141883 This update for pinentry fixes the following issues: - Fix a dangling pointer in qt/main.cpp that caused crashes. (bsc#1141883) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:2307-1 Released: Thu Sep 5 14:45:08 2019 Summary: Security update for util-linux and shadow Type: security Severity: moderate References: 1081947,1082293,1085196,1106214,1121197,1122417,1125886,1127701,1135534,1135708,1141113,353876 This update for util-linux and shadow fixes the following issues: util-linux: - Fixed an issue where PATH settings in /etc/default/su being ignored (bsc#1121197) - Prevent outdated pam files (bsc#1082293). - De-duplicate fstrim -A properly (bsc#1127701). - Do not trim read-only volumes (bsc#1106214). - Integrate pam_keyinit pam module to login (bsc#1081947). - Perform one-time reset of /etc/default/su (bsc#1121197). - Fix problems in reading of login.defs values (bsc#1121197) - libmount: To prevent incorrect behavior, recognize more pseudofs and netfs (bsc#1122417). - raw.service: Add RemainAfterExit=yes (bsc#1135534). - agetty: Return previous response of agetty for special characters (bsc#1085196, bsc#1125886) - libmount: print a blacklist hint for 'unknown filesystem type' (jsc#SUSE-4085, fate#326832) - Fix /etc/default/su comments and create /etc/default/runuser (bsc#1121197). shadow: - Fixed an issue where PATH settings in /etc/default/su being ignored (bsc#1121197) - Fix segfault in useradd during setting password inactivity period. (bsc#1141113) - Hardening for su wrappers (bsc#353876) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:2361-1 Released: Thu Sep 12 07:54:54 2019 Summary: Recommended update for krb5 Type: recommended Severity: moderate References: 1081947,1144047 This update for krb5 contains the following fixes: - Integrate pam_keyinit PAM module, ksu-pam.d. (bsc#1081947) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:2395-1 Released: Wed Sep 18 08:31:38 2019 Summary: Security update for openldap2 Type: security Severity: moderate References: 1073313,1111388,1114845,1143194,1143273,CVE-2017-17740,CVE-2019-13057,CVE-2019-13565 This update for openldap2 fixes the following issues: Security issue fixed: - CVE-2019-13565: Fixed an authentication bypass when using SASL authentication and session encryption (bsc#1143194). - CVE-2019-13057: Fixed an issue with delegated database admin privileges (bsc#1143273). - CVE-2017-17740: When both the nops module and the member of overlay are enabled, attempts to free a buffer that was allocated on the stack, which allows remote attackers to cause a denial of service (slapd crash) via a member MODDN operation. (bsc#1073313) Non-security issues fixed: - Fixed broken shebang line in openldap_update_modules_path.sh (bsc#1114845). - Create files in /var/lib/ldap/ during initial start to allow for transactional updates (bsc#1111388) - Fixed incorrect post script call causing tmpfiles creation not to be run (bsc#1111388). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:2423-1 Released: Fri Sep 20 16:41:45 2019 Summary: Recommended update for aaa_base Type: recommended Severity: moderate References: 1146866,SLE-9132 This update for aaa_base fixes the following issues: Added sysctl.d/51-network.conf to tighten network security (bsc#1146866) (jira#SLE-9132) Following settings have been tightened (and set to 0): - net.ipv4.conf.all.accept_redirects - net.ipv4.conf.default.accept_redirects - net.ipv4.conf.default.accept_source_route - net.ipv6.conf.all.accept_redirects - net.ipv6.conf.default.accept_redirects ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:2533-1 Released: Thu Oct 3 15:02:50 2019 Summary: Security update for sqlite3 Type: security Severity: moderate References: 1150137,CVE-2019-16168 This update for sqlite3 fixes the following issues: Security issue fixed: - CVE-2019-16168: Fixed improper validation of sqlite_stat1 field that could lead to denial of service (bsc#1150137). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:2676-1 Released: Tue Oct 15 21:06:54 2019 Summary: Recommended update for e2fsprogs Type: recommended Severity: moderate References: 1145716,1152101,CVE-2019-5094 This update for e2fsprogs fixes the following issues: Security issue fixed: - CVE-2019-5094: Fixed an arbitrary code execution via specially crafted ext4 file systems. (bsc#1152101) Non-security issue fixed: - libext2fs: Call fsync(2) to clear stale errors for a new a unix I/O channel. (bsc#1145716) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:2730-1 Released: Mon Oct 21 16:04:57 2019 Summary: Security update for procps Type: security Severity: important References: 1092100,1121753,CVE-2018-1122,CVE-2018-1123,CVE-2018-1124,CVE-2018-1125,CVE-2018-1126 This update for procps fixes the following issues: procps was updated to 3.3.15. (bsc#1092100) Following security issues were fixed: - CVE-2018-1122: Prevent local privilege escalation in top. If a user ran top with HOME unset in an attacker-controlled directory, the attacker could have achieved privilege escalation by exploiting one of several vulnerabilities in the config_file() function (bsc#1092100). - CVE-2018-1123: Prevent denial of service in ps via mmap buffer overflow. Inbuilt protection in ps maped a guard page at the end of the overflowed buffer, ensuring that the impact of this flaw is limited to a crash (temporary denial of service) (bsc#1092100). - CVE-2018-1124: Prevent multiple integer overflows leading to a heap corruption in file2strvec function. This allowed a privilege escalation for a local attacker who can create entries in procfs by starting processes, which could result in crashes or arbitrary code execution in proc utilities run by other users (bsc#1092100). - CVE-2018-1125: Prevent stack buffer overflow in pgrep. This vulnerability was mitigated by FORTIFY limiting the impact to a crash (bsc#1092100). - CVE-2018-1126: Ensure correct integer size in proc/alloc.* to prevent truncation/integer overflow issues (bsc#1092100). Also this non-security issue was fixed: - Fix CPU summary showing old data. (bsc#1121753) The update to 3.3.15 contains the following fixes: * library: Increment to 8:0:1 No removals, no new functions Changes: slab and pid structures * library: Just check for SIGLOST and don't delete it * library: Fix integer overflow and LPE in file2strvec CVE-2018-1124 * library: Use size_t for alloc functions CVE-2018-1126 * library: Increase comm size to 64 * pgrep: Fix stack-based buffer overflow CVE-2018-1125 * pgrep: Remove >15 warning as comm can be longer * ps: Fix buffer overflow in output buffer, causing DOS CVE-2018-1123 * ps: Increase command name selection field to 64 * top: Don't use cwd for location of config CVE-2018-1122 * update translations * library: build on non-glibc systems * free: fix scaling on 32-bit systems * Revert 'Support running with child namespaces' * library: Increment to 7:0:1 No changes, no removals New fuctions: numa_init, numa_max_node, numa_node_of_cpu, numa_uninit, xalloc_err_handler * doc: Document I idle state in ps.1 and top.1 * free: fix some of the SI multiples * kill: -l space between name parses correctly * library: dont use vm_min_free on non Linux * library: don't strip off wchan prefixes (ps & top) * pgrep: warn about 15+ char name only if -f not used * pgrep/pkill: only match in same namespace by default * pidof: specify separator between pids * pkill: Return 0 only if we can kill process * pmap: fix duplicate output line under '-x' option * ps: avoid eip/esp address truncations * ps: recognizes SCHED_DEADLINE as valid CPU scheduler * ps: display NUMA node under which a thread ran * ps: Add seconds display for cputime and time * ps: Add LUID field * sysctl: Permit empty string for value * sysctl: Don't segv when file not available * sysctl: Read and write large buffers * top: add config file support for XDG specification * top: eliminated minor libnuma memory leak * top: show fewer memory decimal places (configurable) * top: provide command line switch for memory scaling * top: provide command line switch for CPU States * top: provides more accurate cpu usage at startup * top: display NUMA node under which a thread ran * top: fix argument parsing quirk resulting in SEGV * top: delay interval accepts non-locale radix point * top: address a wishlist man page NLS suggestion * top: fix potential distortion in 'Mem' graph display * top: provide proper multi-byte string handling * top: startup defaults are fully customizable * watch: define HOST_NAME_MAX where not defined * vmstat: Fix alignment for disk partition format * watch: Support ANSI 39,49 reset sequences ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:2757-1 Released: Wed Oct 23 17:21:17 2019 Summary: Security update for lz4 Type: security Severity: moderate References: 1153936,CVE-2019-17543 This update for lz4 fixes the following issues: - CVE-2019-17543: Fixed a heap-based buffer overflow in LZ4_write32 (bsc#1153936). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:2812-1 Released: Tue Oct 29 14:57:55 2019 Summary: Recommended update for systemd Type: recommended Severity: moderate References: 1139459,1140631,1145023,1150595,SLE-7687 This update for systemd provides the following fixes: - Fix a problem that would cause invoking try-restart to an inactive service to hang when a daemon-reload is invoked before the try-restart returned. (bsc#1139459) - man: Add a note about _netdev usage. - units: Replace remote-cryptsetup-pre.target with remote-fs-pre.target. - units: Add [Install] section to remote-cryptsetup.target. - cryptsetup: Ignore _netdev, since it is used in generator. - cryptsetup-generator: Use remote-cryptsetup.target when _netdev is present. (jsc#SLE-7687) - cryptsetup-generator: Add a helper utility to create symlinks. - units: Add remote-cryptsetup.target and remote-cryptsetup-pre.target. - man: Add an explicit description of _netdev to systemd.mount(5). - man: Order fields alphabetically in crypttab(5). - man: Make crypttab(5) a bit easier to read. - units: Order cryptsetup-pre.target before cryptsetup.target. - Fix reporting of enabled-runtime units. - sd-bus: Deal with cookie overruns. (bsc#1150595) - rules: Add by-id symlinks for persistent memory. (bsc#1140631) - Buildrequire polkit so /usr/share/polkit-1/rules.d subdir can be only owned by polkit. (bsc#1145023) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:2870-1 Released: Thu Oct 31 08:09:14 2019 Summary: Recommended update for aaa_base Type: recommended Severity: moderate References: 1051143,1138869,1151023 This update for aaa_base provides the following fixes: - Check if variables can be set before modifying them to avoid warnings on login with a restricted shell. (bsc#1138869) - Add s390x compressed kernel support. (bsc#1151023) - service: Check if there is a second argument before using it. (bsc#1051143) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:2418-1 Released: Thu Nov 14 11:53:03 2019 Summary: Recommended update for bash Type: recommended Severity: moderate References: 1133773,1143055 This update for bash fixes the following issues: - Rework patch readline-7.0-screen (bsc#1143055): map all 'screen(-xxx)?.yyy(-zzz)?' to 'screen' as well as map 'konsole(-xxx)?' and 'gnome(-xxx)?' to 'xterm' - Add a backport from bash 5.0 to perform better with large numbers of sub processes. (bsc#1133773) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:2997-1 Released: Mon Nov 18 15:16:38 2019 Summary: Security update for ncurses Type: security Severity: moderate References: 1103320,1154036,1154037,CVE-2019-17594,CVE-2019-17595 This update for ncurses fixes the following issues: Security issues fixed: - CVE-2019-17594: Fixed a heap-based buffer over-read in the _nc_find_entry function (bsc#1154036). - CVE-2019-17595: Fixed a heap-based buffer over-read in the fmt_entry function (bsc#1154037). Non-security issue fixed: - Removed screen.xterm from terminfo database (bsc#1103320). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:3059-1 Released: Mon Nov 25 17:33:07 2019 Summary: Security update for cpio Type: security Severity: moderate References: 1155199,CVE-2019-14866 This update for cpio fixes the following issues: - CVE-2019-14866: Fixed an improper validation of the values written in the header of a TAR file through the to_oct() function which could have led to unexpected TAR generation (bsc#1155199). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:3061-1 Released: Mon Nov 25 17:34:22 2019 Summary: Security update for gcc9 Type: security Severity: moderate References: 1114592,1135254,1141897,1142649,1142654,1148517,1149145,CVE-2019-14250,CVE-2019-15847,SLE-6533,SLE-6536 This update includes the GNU Compiler Collection 9. A full changelog is provided by the GCC team on: https://www.gnu.org/software/gcc/gcc-9/changes.html The base system compiler libraries libgcc_s1, libstdc++6 and others are now built by the gcc 9 packages. To use it, install 'gcc9' or 'gcc9-c++' or other compiler brands and use CC=gcc-9 / CXX=g++-9 during configuration for using it. Security issues fixed: - CVE-2019-15847: Fixed a miscompilation in the POWER9 back end, that optimized multiple calls of the __builtin_darn intrinsic into a single call. (bsc#1149145) - CVE-2019-14250: Fixed a heap overflow in the LTO linker. (bsc#1142649) Non-security issues fixed: - Split out libstdc++ pretty-printers into a separate package supplementing gdb and the installed runtime. (bsc#1135254) - Fixed miscompilation for vector shift on s390. (bsc#1141897) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:3070-1 Released: Tue Nov 26 12:39:29 2019 Summary: Recommended update for gpg2 Type: recommended Severity: low References: 1152755 This update for gpg2 provides the following fix: - Remove a build requirement on self. This is causing Leap 15.2 bootstrap to fail. (bsc#1152755) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:3086-1 Released: Thu Nov 28 10:02:24 2019 Summary: Security update for libidn2 Type: security Severity: moderate References: 1154884,1154887,CVE-2019-12290,CVE-2019-18224 This update for libidn2 to version 2.2.0 fixes the following issues: - CVE-2019-12290: Fixed an improper round-trip check when converting A-labels to U-labels (bsc#1154884). - CVE-2019-18224: Fixed a heap-based buffer overflow that was caused by long domain strings (bsc#1154887). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:3087-1 Released: Thu Nov 28 10:03:00 2019 Summary: Security update for libxml2 Type: security Severity: low References: 1123919 This update for libxml2 doesn't fix any additional security issues, but correct its rpm changelog to reflect all CVEs that have been fixed over the past. ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:3118-1 Released: Fri Nov 29 14:41:35 2019 Summary: Recommended update for e2fsprogs Type: recommended Severity: moderate References: 1154295 This update for e2fsprogs fixes the following issues: - Make minimum size estimates more reliable for mounted filesystem. (bsc#1154295) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:3166-1 Released: Wed Dec 4 11:24:42 2019 Summary: Recommended update for aaa_base Type: recommended Severity: moderate References: 1007715,1084934,1157278 This update for aaa_base fixes the following issues: - Use official key binding functions in inputrc that is replace up-history with previous-history, down-history with next-history and backward-delete-word with backward-kill-word. (bsc#1084934) - Add some missed key escape sequences for urxvt-unicode terminal as well. (bsc#1007715) - Clear broken ghost entry in patch which breaks 'readline'. (bsc#1157278) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2019:3240-1 Released: Tue Dec 10 10:40:19 2019 Summary: Recommended update for ca-certificates-mozilla, p11-kit Type: recommended Severity: moderate References: 1154871 This update for ca-certificates-mozilla, p11-kit fixes the following issues: Changes in ca-certificates-mozilla: - export correct p11kit trust attributes so Firefox detects built in certificates (bsc#1154871). Changes in p11-kit: - support loading NSS attribute CKA_NSS_MOZILLA_CA_POLICY so Firefox detects built in certificates (bsc#1154871) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:3267-1 Released: Wed Dec 11 11:19:53 2019 Summary: Security update for libssh Type: security Severity: important References: 1158095,CVE-2019-14889 This update for libssh fixes the following issues: - CVE-2019-14889: Fixed an arbitrary command execution (bsc#1158095). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2019:3392-1 Released: Fri Dec 27 13:33:29 2019 Summary: Security update for libgcrypt Type: security Severity: moderate References: 1148987,1155338,1155339,CVE-2019-13627 This update for libgcrypt fixes the following issues: Security issues fixed: - CVE-2019-13627: Mitigation against an ECDSA timing attack (bsc#1148987). Bug fixes: - Added CMAC AES self test (bsc#1155339). - Added CMAC TDES self test missing (bsc#1155338). - Fix test dsa-rfc6979 in FIPS mode. ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:129-1 Released: Mon Jan 20 09:21:13 2020 Summary: Security update for libssh Type: security Severity: important References: 1158095,CVE-2019-14889 This update for libssh fixes the following issues: - CVE-2019-14889: Fixed an unwanted command execution in scp caused by unsanitized location (bsc#1158095). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:225-1 Released: Fri Jan 24 06:49:07 2020 Summary: Recommended update for procps Type: recommended Severity: moderate References: 1158830 This update for procps fixes the following issues: - Fix for 'ps -C' allowing to accept any arguments longer than 15 characters anymore. (bsc#1158830) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:256-1 Released: Wed Jan 29 09:39:17 2020 Summary: Recommended update for aaa_base Type: recommended Severity: moderate References: 1157794,1160970 This update for aaa_base fixes the following issues: - Improves the way how the Java path is created to fix an issue with sapjvm. (bsc#1157794) - Drop 'dev.cdrom.autoclose' = 0 from sysctl config. (bsc#1160970) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:262-1 Released: Thu Jan 30 11:02:42 2020 Summary: Security update for glibc Type: security Severity: moderate References: 1149332,1151582,1157292,1157893,1158996,CVE-2019-19126 This update for glibc fixes the following issues: Security issue fixed: - CVE-2019-19126: Fixed to ignore the LD_PREFER_MAP_32BIT_EXEC environment variable during program execution after a security transition (bsc#1157292). Bug fixes: - Fixed z15 (s390x) strstr implementation that can return incorrect results if search string cross page boundary (bsc#1157893). - Fixed Hardware support in toolchain (bsc#1151582). - Fixed syscalls during early process initialization (SLE-8348). - Fixed an array overflow in backtrace for PowerPC (bsc#1158996). - Moved to posix_spawn on popen (bsc#1149332). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:265-1 Released: Thu Jan 30 14:05:34 2020 Summary: Security update for e2fsprogs Type: security Severity: moderate References: 1160571,CVE-2019-5188 This update for e2fsprogs fixes the following issues: - CVE-2019-5188: Fixed a code execution vulnerability in the directory rehashing functionality (bsc#1160571). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:279-1 Released: Fri Jan 31 12:01:39 2020 Summary: Recommended update for p11-kit Type: recommended Severity: moderate References: 1013125 This update for p11-kit fixes the following issues: - Also build documentation (bsc#1013125) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:335-1 Released: Thu Feb 6 11:37:24 2020 Summary: Security update for systemd Type: security Severity: important References: 1084671,1092920,1106383,1133495,1151377,1154256,1155207,1155574,1156213,1156482,1158485,1159814,1161436,1162108,CVE-2019-20386,CVE-2020-1712 This update for systemd fixes the following issues: - CVE-2020-1712 (bsc#bsc#1162108) Fix a heap use-after-free vulnerability, when asynchronous Polkit queries were performed while handling Dbus messages. A local unprivileged attacker could have abused this flaw to crash systemd services or potentially execute code and elevate their privileges, by sending specially crafted Dbus messages. - Use suse.pool.ntp.org server pool on SLE distros (jsc#SLE-7683) - libblkid: open device in nonblock mode. (bsc#1084671) - udev/cdrom_id: Do not open CD-rom in exclusive mode. (bsc#1154256) - bus_open leak sd_event_source when udevadm trigger。 (bsc#1161436 CVE-2019-20386) - fileio: introduce read_full_virtual_file() for reading virtual files in sysfs, procfs (bsc#1133495 bsc#1159814) - fileio: initialize errno to zero before we do fread() - fileio: try to read one byte too much in read_full_stream() - logind: consider 'greeter' sessions suitable as 'display' sessions of a user (bsc#1158485) - logind: never elect a session that is stopping as display - journal: include kmsg lines from the systemd process which exec()d us (#8078) - udevd: don't use monitor after manager_exit() - udevd: capitalize log messages in on_sigchld() - udevd: merge conditions to decrease indentation - Revert 'udevd: fix crash when workers time out after exit is signal caught' - core: fragments of masked units ought not be considered for NeedDaemonReload (#7060) (bsc#1156482) - udevd: fix crash when workers time out after exit is signal caught - udevd: wait for workers to finish when exiting (bsc#1106383) - Improve bash completion support (bsc#1155207) * shell-completion: systemctl: do not list template units in {re,}start * shell-completion: systemctl: pass current word to all list_unit* * bash-completion: systemctl: pass current partial unit to list-unit* (bsc#1155207) * bash-completion: systemctl: use systemctl --no-pager * bash-completion: also suggest template unit files * bash-completion: systemctl: add missing options and verbs * bash-completion: use the first argument instead of the global variable (#6457) - networkd: VXLan Make group and remote variable separate (bsc#1156213) - networkd: vxlan require Remote= to be a non multicast address (#8117) (bsc#1156213) - fs-util: let's avoid unnecessary strerror() - fs-util: introduce inotify_add_watch_and_warn() helper - ask-password: improve log message when inotify limit is reached (bsc#1155574) - shared/install: failing with -ELOOP can be due to the use of an alias in install_error() (bsc#1151377) - man: alias names can't be used with enable command (bsc#1151377) - Add boot option to not use swap at system start (jsc#SLE-7689) - Allow YaST to select Iranian (Persian, Farsi) keyboard layout (bsc#1092920) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:339-1 Released: Thu Feb 6 13:03:22 2020 Summary: Recommended update for openldap2 Type: recommended Severity: low References: 1158921 This update for openldap2 provides the following fix: - Add libldap-data to the product (as it contains ldap.conf). (bsc#1158921) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:451-1 Released: Tue Feb 25 10:50:35 2020 Summary: Recommended update for libgcrypt Type: recommended Severity: moderate References: 1155337,1161215,1161216,1161218,1161219,1161220 This update for libgcrypt fixes the following issues: - ECDSA: Check range of coordinates (bsc#1161216) - FIPS: libgcrypt DSA PQG parameter generation: Missing value [bsc#1161219] - FIPS: libgcrypt DSA PQG verification incorrect results [bsc#1161215] - FIPS: libgcrypt RSA siggen/keygen: 4k not supported [bsc#1161220] - FIPS: keywrap gives incorrect results [bsc#1161218] - FIPS: RSA/DSA/ECDSA are missing hashing operation [bsc#1155337] ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:476-1 Released: Tue Feb 25 14:23:14 2020 Summary: Recommended update for perl Type: recommended Severity: moderate References: 1102840,1160039 This update for perl fixes the following issues: - Some packages make assumptions about the date and time they are built. This update will solve the issues caused by calling the perl function timelocal expressing the year with two digit only instead of four digits. (bsc#1102840) (bsc#1160039) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:480-1 Released: Tue Feb 25 17:38:22 2020 Summary: Recommended update for aaa_base Type: recommended Severity: moderate References: 1160735 This update for aaa_base fixes the following issues: - Change 'rp_filter' to increase the default priority to ethernet over the wifi. (bsc#1160735) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:525-1 Released: Fri Feb 28 11:49:36 2020 Summary: Recommended update for pam Type: recommended Severity: moderate References: 1164562 This update for pam fixes the following issues: - Add libdb as build-time dependency to enable pam_userdb module. Enable pam_userdb.so (jsc#sle-7258, bsc#1164562) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:572-1 Released: Tue Mar 3 13:25:41 2020 Summary: Recommended update for cyrus-sasl Type: recommended Severity: moderate References: 1162518 This update for cyrus-sasl fixes the following issues: - Added support for retrieving negotiated SSF in gssapi plugin (bsc#1162518) - Fixed GSS-SPNEGO to use flags negotiated by GSSAPI for SSF (bsc#1162518) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:597-1 Released: Thu Mar 5 15:24:09 2020 Summary: Recommended update for libgcrypt Type: recommended Severity: moderate References: 1164950 This update for libgcrypt fixes the following issues: - FIPS: Run the self-tests from the constructor [bsc#1164950] ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:633-1 Released: Tue Mar 10 16:23:08 2020 Summary: Recommended update for aaa_base Type: recommended Severity: moderate References: 1139939,1151023 This update for aaa_base fixes the following issues: - get_kernel_version: fix for current kernel on s390x (bsc#1151023, bsc#1139939) - added '-h'/'--help' to the command old - change feedback url from http://www.suse.de/feedback to https://github.com/openSUSE/aaa_base/issues ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:668-1 Released: Fri Mar 13 10:48:58 2020 Summary: Security update for glibc Type: security Severity: moderate References: 1163184,1164505,1165784,CVE-2020-10029 This update for glibc fixes the following issues: - CVE-2020-10029: Fixed a potential overflow in on-stack buffer during range reduction (bsc#1165784). - Fixed an issue where pthread were not always locked correctly (bsc#1164505). - Document mprotect and introduce section on memory protection (bsc#1163184). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:689-1 Released: Fri Mar 13 17:09:01 2020 Summary: Recommended update for pam Type: recommended Severity: moderate References: 1166510 This update for PAM fixes the following issue: - The license of libdb linked against pam_userdb is not always wanted, so we temporary disabled pam_userdb again. It will be published in a different package at a later time. (bsc#1166510) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:475-1 Released: Thu Mar 19 11:00:46 2020 Summary: Recommended update for systemd Type: recommended Severity: moderate References: 1160595 This update for systemd fixes the following issues: - Remove TasksMax limit for both user and system slices (jsc#SLE-10123) - Backport IP filtering feature (jsc#SLE-7743 bsc#1160595) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:729-1 Released: Thu Mar 19 14:44:22 2020 Summary: Recommended update for glibc Type: recommended Severity: moderate References: 1166106 This update for glibc fixes the following issues: - Allow dlopen of filter object to work (bsc#1166106, BZ #16272) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:793-1 Released: Wed Mar 25 15:16:00 2020 Summary: Recommended update for systemd Type: recommended Severity: moderate References: 1139459,1161262,1162108,1164717,1165579,CVE-2020-1712 This update for systemd fixes the following issues: - manager: fix job mode when signalled to shutdown etc (bsc#1161262) - remove fallback for user/exit.target - dbus method Manager.Exit() does not start exit.target - do not install rescue.target for alt-↑ - %j/%J unit specifiers Added support for I/O scheduler selection with blk-mq (bsc#1165579, bsc#1164717). Added the udev 60-ssd-scheduler.rules: - This rules file which select the default IO scheduler for SSDs is being moved out from the git repo since this is not related to systemd or udev at all and is maintained by the kernel team. - core: coldplug possible nop_job (bsc#1139459) - Revert 'udev: use 'deadline' IO scheduler for SSD disks' - Fix typo in function name - polkit: when authorizing via PK let's re-resolve callback/userdata instead of caching it (bsc#1162108 CVE-2020-1712) - sd-bus: introduce API for re-enqueuing incoming messages - polkit: on async pk requests, re-validate action/details ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:820-1 Released: Tue Mar 31 13:02:22 2020 Summary: Security update for glibc Type: security Severity: important References: 1167631,CVE-2020-1752 This update for glibc fixes the following issues: - CVE-2020-1752: Fixed a use after free in glob which could have allowed a local attacker to create a specially crafted path that, when processed by the glob function, could potentially have led to arbitrary code execution (bsc#1167631). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:846-1 Released: Thu Apr 2 07:24:07 2020 Summary: Recommended update for libgcrypt Type: recommended Severity: moderate References: 1164950,1166748,1167674 This update for libgcrypt fixes the following issues: - FIPS: Remove an unneeded check in _gcry_global_constructor (bsc#1164950) - FIPS: Fix drbg to be threadsafe (bsc#1167674) - FIPS: Run self-tests from constructor during power-on [bsc#1166748] * Set up global_init as the constructor function: * Relax the entropy requirements on selftest. This is especially important for virtual machines to boot properly before the RNG is available: ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:917-1 Released: Fri Apr 3 15:02:25 2020 Summary: Recommended update for pam Type: recommended Severity: moderate References: 1166510 This update for pam fixes the following issues: - Moved pam_userdb into a separate package pam-extra. (bsc#1166510) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:948-1 Released: Wed Apr 8 07:44:21 2020 Summary: Security update for gmp, gnutls, libnettle Type: security Severity: moderate References: 1152692,1155327,1166881,1168345,CVE-2020-11501 This update for gmp, gnutls, libnettle fixes the following issues: Security issue fixed: - CVE-2020-11501: Fixed zero random value in DTLS client hello (bsc#1168345) FIPS related bugfixes: - FIPS: Install checksums for binary integrity verification which are required when running in FIPS mode (bsc#1152692, jsc#SLE-9518) - FIPS: Fixed a cfb8 decryption issue, no longer truncate output IV if input is shorter than block size. (bsc#1166881) - FIPS: Added Diffie Hellman public key verification test. (bsc#1155327) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:961-1 Released: Wed Apr 8 13:34:06 2020 Summary: Recommended update for e2fsprogs Type: recommended Severity: moderate References: 1160979 This update for e2fsprogs fixes the following issues: - e2fsck: clarify overflow link count error message (bsc#1160979) - ext2fs: update allocation info earlier in ext2fs_mkdir() (bsc#1160979) - ext2fs: implement dir entry creation in htree directories (bsc#1160979) - tests: add test to excercise indexed directories with metadata_csum (bsc#1160979) - tune2fs: update dir checksums when clearing dir_index feature (bsc#1160979) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:967-1 Released: Thu Apr 9 11:41:53 2020 Summary: Security update for libssh Type: security Severity: moderate References: 1168699,CVE-2020-1730 This update for libssh fixes the following issues: - CVE-2020-1730: Fixed a possible denial of service when using AES-CTR (bsc#1168699). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1063-1 Released: Wed Apr 22 10:46:50 2020 Summary: Recommended update for libgcrypt Type: recommended Severity: moderate References: 1165539,1169569 This update for libgcrypt fixes the following issues: This update for libgcrypt fixes the following issues: - FIPS: Switch the PCT to use the new signature operation (bsc#1165539) - FIPS: Verify that the generated signature and the original input differ in test_keys function for RSA, DSA and ECC (bsc#1165539) - Add zero-padding when qx and qy have different lengths when assembling the Q point from affine coordinates. - Ship the FIPS checksum file in the shared library package and create a separate trigger file for the FIPS selftests (bsc#1169569) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1175-1 Released: Tue May 5 08:33:43 2020 Summary: Recommended update for systemd Type: recommended Severity: moderate References: 1165011,1168076 This update for systemd fixes the following issues: - Fix check for address to keep interface names stable. (bsc#1168076) - Fix for checking non-normalized WHAT for network FS. (bsc#1165011) - Allow to specify an arbitrary string for when vfs is used. (bsc#1165011) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1214-1 Released: Thu May 7 11:20:34 2020 Summary: Recommended update for libgcrypt Type: recommended Severity: moderate References: 1169944 This update for libgcrypt fixes the following issues: - FIPS: libgcrypt: Fixed a double free in test_keys() on failed signature verification (bsc#1169944) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:1219-1 Released: Thu May 7 17:10:42 2020 Summary: Security update for openldap2 Type: security Severity: important References: 1170771,CVE-2020-12243 This update for openldap2 fixes the following issues: - CVE-2020-12243: Fixed a denial of service related to recursive filters (bsc#1170771). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1226-1 Released: Fri May 8 10:51:05 2020 Summary: Recommended update for gcc9 Type: recommended Severity: moderate References: 1149995,1152590,1167898 This update for gcc9 fixes the following issues: This update ships the GCC 9.3 release. - Includes a fix for Internal compiler error when building HepMC (bsc#1167898) - Includes fix for binutils version parsing - Add libstdc++6-pp provides and conflicts to avoid file conflicts with same minor version of libstdc++6-pp from gcc10. - Add gcc9 autodetect -g at lto link (bsc#1149995) - Install go tool buildid for bootstrapping go ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:1294-1 Released: Mon May 18 07:38:36 2020 Summary: Security update for file Type: security Severity: moderate References: 1154661,1169512,CVE-2019-18218 This update for file fixes the following issues: Security issues fixed: - CVE-2019-18218: Fixed a heap-based buffer overflow in cdf_read_property_info() (bsc#1154661). Non-security issue fixed: - Fixed broken '--help' output (bsc#1169512). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:1299-1 Released: Mon May 18 07:43:21 2020 Summary: Security update for libxml2 Type: security Severity: moderate References: 1159928,1161517,1161521,CVE-2019-19956,CVE-2019-20388,CVE-2020-7595 This update for libxml2 fixes the following issues: - CVE-2019-20388: Fixed a memory leak in xmlSchemaPreRun (bsc#1161521). - CVE-2019-19956: Fixed a memory leak (bsc#1159928). - CVE-2020-7595: Fixed an infinite loop in an EOF situation (bsc#1161517). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1328-1 Released: Mon May 18 17:16:04 2020 Summary: Recommended update for grep Type: recommended Severity: moderate References: 1155271 This update for grep fixes the following issues: - Update testsuite expectations, no functional changes (bsc#1155271) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1361-1 Released: Thu May 21 09:31:18 2020 Summary: Recommended update for libgcrypt Type: recommended Severity: moderate References: 1171872 This update for libgcrypt fixes the following issues: - FIPS: RSA/DSA/ECC test_keys() print out debug messages only in debug mode (bsc#1171872) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1400-1 Released: Mon May 25 14:09:02 2020 Summary: Recommended update for glibc Type: recommended Severity: moderate References: 1162930 This update for glibc fixes the following issues: - nptl: wait for pending setxid request also in detached thread. (bsc#1162930) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1404-1 Released: Mon May 25 15:32:34 2020 Summary: Recommended update for zlib Type: recommended Severity: moderate References: 1138793,1166260 This update for zlib fixes the following issues: - Including the latest fixes from IBM (bsc#1166260) IBM Z mainframes starting from version z15 provide DFLTCC instruction, which implements deflate algorithm in hardware with estimated compression and decompression performance orders of magnitude faster than the current zlib and ratio comparable with that of level 1. - Add SUSE specific fix to solve bsc#1138793. The fix will avoid to test if the app was linked with exactly same version of zlib like the one that is present on the runtime. ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1506-1 Released: Fri May 29 17:22:11 2020 Summary: Recommended update for aaa_base Type: recommended Severity: moderate References: 1087982,1170527 This update for aaa_base fixes the following issues: - Not all XTerm based emulators do have a terminfo entry. (bsc#1087982) - Better support of Midnight Commander. (bsc#1170527) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:1532-1 Released: Thu Jun 4 10:16:12 2020 Summary: Security update for libxml2 Type: security Severity: moderate References: 1172021,CVE-2019-19956 This update for libxml2 fixes the following issues: - CVE-2019-19956: Reverted the upstream fix for this memory leak because it introduced other, more severe vulnerabilities (bsc#1172021). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:1682-1 Released: Fri Jun 19 09:44:54 2020 Summary: Security update for perl Type: security Severity: important References: 1171863,1171864,1171866,1172348,CVE-2020-10543,CVE-2020-10878,CVE-2020-12723 This update for perl fixes the following issues: - CVE-2020-10543: Fixed a heap buffer overflow in regular expression compiler which could have allowed overwriting of allocated memory with attacker's data (bsc#1171863). - CVE-2020-10878: Fixed multiple integer overflows which could have allowed the insertion of instructions into the compiled form of Perl regular expression (bsc#1171864). - CVE-2020-12723: Fixed an attacker's corruption of the intermediate language state of a compiled regular expression (bsc#1171866). - Fixed a bad warning in features.ph (bsc#1172348). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:1733-1 Released: Wed Jun 24 09:43:36 2020 Summary: Security update for curl Type: security Severity: important References: 1173026,1173027,CVE-2020-8169,CVE-2020-8177 This update for curl fixes the following issues: - CVE-2020-8177: Fixed an issue where curl could have been tricked by a malicious server to overwrite a local file when using the -J option (bsc#1173027). - CVE-2020-8169: Fixed an issue where could have led to partial password leak over DNS on HTTP redirect (bsc#1173026). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1759-1 Released: Thu Jun 25 18:44:37 2020 Summary: Recommended update for krb5 Type: recommended Severity: moderate References: 1169357 This update for krb5 fixes the following issue: - Call systemd to reload the services instead of init-scripts. (bsc#1169357) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1760-1 Released: Thu Jun 25 18:46:13 2020 Summary: Recommended update for systemd Type: recommended Severity: moderate References: 1157315,1162698,1164538,1169488,1171145,1172072 This update for systemd fixes the following issues: - Merge branch 'SUSE/v234' into SLE15 units: starting suspend.target should not fail when suspend is successful (bsc#1172072) core/mount: do not add Before=local-fs.target or remote-fs.target if nofail mount option is set mount: let mount_add_extras() take care of remote-fs.target deps (bsc#1169488) mount: set up local-fs.target/remote-fs.target deps in mount_add_default_dependencies() too udev: rename the persistent link for ATA devices (bsc#1164538) shared/install: try harder to find enablement symlinks when disabling a unit (bsc#1157315) tmpfiles: remove unnecessary assert (bsc#1171145) test-engine: manager_free() was called too early pid1: by default make user units inherit their umask from the user manager (bsc#1162698) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:1396-1 Released: Fri Jul 3 12:33:05 2020 Summary: Security update for zstd Type: security Severity: moderate References: 1082318,1133297 This update for zstd fixes the following issues: - Fix for build error caused by wrong static libraries. (bsc#1133297) - Correction in spec file marking the license as documentation. (bsc#1082318) - Add new package for SLE-15. (jsc#ECO-1886) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:1856-1 Released: Mon Jul 6 17:05:51 2020 Summary: Security update for openldap2 Type: security Severity: important References: 1172698,1172704,CVE-2020-8023 This update for openldap2 fixes the following issues: - CVE-2020-8023: Fixed a potential local privilege escalation from ldap to root when OPENLDAP_CONFIG_BACKEND='ldap' was used (bsc#1172698). - Changed DB_CONFIG to root:ldap permissions (bsc#1172704). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1938-1 Released: Thu Jul 16 14:43:32 2020 Summary: Recommended update for libsolv, libzypp, zypper Type: recommended Severity: moderate References: 1169947,1170801,1172925,1173106 This update for libsolv, libzypp, zypper fixes the following issues: libsolv was updated to: - Enable zstd compression support for sle15 zypper was updated to version 1.14.37: - Print switch abbrev warning to stderr (bsc#1172925) - Fix typo in man page (bsc#1169947) libzypp was updated to 17.24.0 - Fix core dump with corrupted history file (bsc#1170801) - Enable zchunk metadata download if libsolv supports it. - Better handling of the purge-kernels algorithm. (bsc#1173106) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1954-1 Released: Sat Jul 18 03:07:15 2020 Summary: Recommended update for cracklib Type: recommended Severity: moderate References: 1172396 This update for cracklib fixes the following issues: - Fixed a buffer overflow when processing long words. ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1987-1 Released: Tue Jul 21 17:02:15 2020 Summary: Recommended update for libsolv, libzypp, yast2-packager, yast2-pkg-bindings Type: recommended Severity: important References: 1172477,1173336,1174011 This update for libsolv, libzypp, yast2-packager, yast2-pkg-bindings fixes the following issues: libsolv: - No source changes, just shipping it as an installer update (required by yast2-pkg-bindings). libzypp: - Proactively send credentials if the URL specifes '?auth=basic' and a username. (bsc#1174011) - ZYPP_MEDIA_CURL_DEBUG: Strip credentials in header log. (bsc#1174011) yast2-packager: - Handle variable expansion in repository name. (bsc#1172477) - Improve medium type detection, do not report Online medium when the /media.1/products file is missing in the repository, SMT does not mirror this file. (bsc#1173336) yast2-pkg-bindings: - Extensions to handle raw repository name. (bsc#1172477) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:1989-1 Released: Tue Jul 21 17:58:58 2020 Summary: Recommended update to SLES-releases Type: recommended Severity: important References: 1173582 This update of SLES-release provides the following fix: - Obsolete Leap 15.2 as well to allow migration from Leap to SLE. (bsc#1173582) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:2083-1 Released: Thu Jul 30 10:27:59 2020 Summary: Recommended update for diffutils Type: recommended Severity: moderate References: 1156913 This update for diffutils fixes the following issue: - Disable a sporadically failing test for ppc64 and ppc64le builds. (bsc#1156913) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:2099-1 Released: Fri Jul 31 08:06:40 2020 Summary: Recommended update for systemd Type: recommended Severity: moderate References: 1173227,1173229,1173422 This update for systemd fixes the following issues: - migrate-sysconfig-i18n.sh: fixed marker handling (bsc#1173229) The marker is used to make sure the script is run only once. Instead of storing it in /usr, use /var which is more appropriate for such file. Also make it owned by systemd package. - Fix inconsistent file modes for some ghost files (bsc#1173227) Ghost files are assumed by rpm to have mode 000 by default which is not consistent with file permissions set at runtime. Also /var/lib/systemd/random-seed was tracked wrongly as a directory. Also don't track (ghost) /etc/systemd/system/runlevel*.target aliases since we're not supposed to track units or aliases user might define/override. - Fix build of systemd on openSUSE Leap 15.2 (bsc#1173422) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:2148-1 Released: Thu Aug 6 13:36:17 2020 Summary: Recommended update for ca-certificates-mozilla Type: recommended Severity: important References: 1174673 This update for ca-certificates-mozilla fixes the following issues: Update to 2.42 state of the Mozilla NSS Certificate store (bsc#1174673) Removed CAs: * AddTrust External CA Root * AddTrust Class 1 CA Root * LuxTrust Global Root 2 * Staat der Nederlanden Root CA - G2 * Symantec Class 1 Public Primary Certification Authority - G4 * Symantec Class 2 Public Primary Certification Authority - G4 * VeriSign Class 3 Public Primary Certification Authority - G3 Added CAs: * certSIGN Root CA G2 * e-Szigno Root CA 2017 * Microsoft ECC Root Certificate Authority 2017 * Microsoft RSA Root Certificate Authority 2017 ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:2224-1 Released: Thu Aug 13 09:15:47 2020 Summary: Recommended update for glibc Type: recommended Severity: moderate References: 1171878,1172085 This update for glibc fixes the following issues: - Fix concurrent changes on nscd aware files appeared by 'getent' when the NSCD cache was enabled. (bsc#1171878, BZ #23178) - Implement correct locking and cancellation cleanup in syslog functions. (bsc#1172085, BZ #26100) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:2278-1 Released: Wed Aug 19 21:26:08 2020 Summary: Recommended update for util-linux Type: recommended Severity: moderate References: 1149911,1151708,1168235,1168389 This update for util-linux fixes the following issues: - blockdev: Do not fail --report on kpartx-style partitions on multipath. (bsc#1168235) - nologin: Add support for -c to prevent error from su -c. (bsc#1151708) - Avoid triggering autofs in lookup_umount_fs_by_statfs. (bsc#1168389) - mount: Fall back to device node name if /dev/mapper link not found. (bsc#1149911) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:2384-1 Released: Sat Aug 29 00:57:13 2020 Summary: Recommended update for e2fsprogs Type: recommended Severity: low References: 1170964 This update for e2fsprogs fixes the following issues: - Fix for an issue when system message with placeholders are not properly replaced. (bsc#1170964) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:2411-1 Released: Tue Sep 1 13:28:47 2020 Summary: Recommended update for systemd Type: recommended Severity: moderate References: 1142733,1146991,1158336,1172195,1172824,1173539 This update for systemd fixes the following issues: - Improve logging when PID1 fails at setting a namespace up when spawning a command specified by 'Exec*='. (bsc#1172824, bsc#1142733) pid1: improve message when setting up namespace fails. execute: let's close glibc syslog channels too. execute: normalize logging in *execute.c*. execute: fix typo in error message. execute: drop explicit *log_open()*/*log_close()* now that it is unnecessary. execute: make use of the new logging mode in *execute.c* log: add a mode where we open the log fds for every single log message. log: let's make use of the fact that our functions return the negative error code for *log_oom()* too. execute: downgrade a log message ERR → WARNING, since we proceed ignoring its result. execute: rework logging in *setup_keyring()* to include unit info. execute: improve and augment execution log messages. - vconsole-setup: downgrade log message when setting font fails on dummy console. (bsc#1172195 bsc#1173539) - fix infinite timeout. (bsc#1158336) - bpf: mount bpffs by default on boot. (bsc#1146991) - man: explain precedence for options which take a list. - man: unify titling, fix description of precedence in sysusers.d(5) - udev-event: fix timeout log messages. ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:2420-1 Released: Tue Sep 1 13:48:35 2020 Summary: Recommended update for zlib Type: recommended Severity: moderate References: 1174551,1174736 This update for zlib provides the following fixes: - Permit a deflateParams() parameter change as soon as possible. (bsc#1174736) - Fix DFLTCC not flushing EOBS when creating raw streams. (bsc#1174551) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:2445-1 Released: Wed Sep 2 09:33:02 2020 Summary: Security update for curl Type: security Severity: moderate References: 1175109,CVE-2020-8231 This update for curl fixes the following issues: - An application that performs multiple requests with libcurl's multi API and sets the 'CURLOPT_CONNECT_ONLY' option, might in rare circumstances experience that when subsequently using the setup connect-only transfer, libcurl will pick and use the wrong connection and instead pick another one the application has created since then. [bsc#1175109, CVE-2020-8231] ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:2581-1 Released: Wed Sep 9 13:07:07 2020 Summary: Security update for openldap2 Type: security Severity: moderate References: 1174154,CVE-2020-15719 This update for openldap2 fixes the following issues: - bsc#1174154 - CVE-2020-15719 - This resolves an issue with x509 SAN's falling back to CN validation in violation of rfc6125. ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:2612-1 Released: Fri Sep 11 11:18:01 2020 Summary: Security update for libxml2 Type: security Severity: moderate References: 1176179,CVE-2020-24977 This update for libxml2 fixes the following issues: - CVE-2020-24977: Fixed a global-buffer-overflow in xmlEncodeEntitiesInternal (bsc#1176179). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:2651-1 Released: Wed Sep 16 14:42:55 2020 Summary: Recommended update for zlib Type: recommended Severity: moderate References: 1175811,1175830,1175831 This update for zlib fixes the following issues: - Fix compression level switching (bsc#1175811, bsc#1175830, bsc#1175831) - Enable hardware compression on s390/s390x (jsc#SLE-13776) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:2704-1 Released: Tue Sep 22 15:06:36 2020 Summary: Recommended update for krb5 Type: recommended Severity: moderate References: 1174079 This update for krb5 fixes the following issue: - Fix prefix reported by krb5-config, libraries and headers are not installed under /usr/lib/mit prefix. (bsc#1174079) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:2712-1 Released: Tue Sep 22 17:08:03 2020 Summary: Security update for openldap2 Type: security Severity: moderate References: 1175568,CVE-2020-8027 This update for openldap2 fixes the following issues: - CVE-2020-8027: openldap_update_modules_path.sh starts daemons unconditionally and uses fixed paths in /tmp (bsc#1175568). ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:2819-1 Released: Thu Oct 1 10:39:16 2020 Summary: Recommended update for libzypp, zypper Type: recommended Severity: moderate References: 1165424,1173273,1173529,1174240,1174561,1174918,1175342,1175592 This update for libzypp, zypper provides the following fixes: Changes in libzypp: - VendorAttr: Const-correct API and let Target provide its settings. (bsc#1174918) - Support buildnr with commit hash in purge-kernels. This adds special behaviour for when a kernel version has the rebuild counter before the kernel commit hash. (bsc#1175342) - Improve Italian translation of the 'breaking dependencies' message. (bsc#1173529) - Make sure reading from lsof does not block forever. (bsc#1174240) - Just collect details for the signatures found. Changes in zypper: - man: Enhance description of the global package cache. (bsc#1175592) - man: Point out that plain rpm packages are not downloaded to the global package cache. (bsc#1173273) - Directly list subcommands in 'zypper help'. (bsc#1165424) - Remove extern C block wrapping augeas.h as it breaks the build on Arch Linux. - Point out that plaindir repos do not follow symlinks. (bsc#1174561) - Fix help command for list-patches. ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:2852-1 Released: Fri Oct 2 16:55:39 2020 Summary: Recommended update for openssl-1_1 Type: recommended Severity: moderate References: 1173470,1175844 This update for openssl-1_1 fixes the following issues: FIPS: * Include ECDH/DH Requirements from SP800-56Arev3 (bsc#1175844, bsc#1173470). * Add shared secret KAT to FIPS DH selftest (bsc#1175844). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:2864-1 Released: Tue Oct 6 10:34:14 2020 Summary: Security update for gnutls Type: security Severity: moderate References: 1176086,1176181,1176671,CVE-2020-24659 This update for gnutls fixes the following issues: - Fix heap buffer overflow in handshake with no_renegotiation alert sent (CVE-2020-24659 bsc#1176181) - FIPS: Implement (EC)DH requirements from SP800-56Arev3 (bsc#1176086) - FIPS: Use 2048 bit prime in DH selftest (bsc#1176086) - FIPS: Add TLS KDF selftest (bsc#1176671) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:2869-1 Released: Tue Oct 6 16:13:20 2020 Summary: Recommended update for aaa_base Type: recommended Severity: moderate References: 1011548,1153943,1153946,1161239,1171762 This update for aaa_base fixes the following issues: - DIR_COLORS (bug#1006973): - add screen.xterm-256color - add TERM rxvt-unicode-256color - sort and merge TERM entries in etc/DIR_COLORS - check for Packages.db and use this instead of Packages. (bsc#1171762) - Rename path() to _path() to avoid using a general name. - refresh_initrd call modprobe as /sbin/modprobe (bsc#1011548) - etc/profile add some missing ;; in case esac statements - profile and csh.login: on s390x set TERM to dumb on dumb terminal (bsc#1153946) - backup-rpmdb: exit if zypper is running (bsc#1161239) - Add color alias for ip command (jsc#sle-9880, jsc#SLE-7679, bsc#1153943) ----------------------------------------------------------------- Advisory ID: SUSE-RU-2020:2893-1 Released: Mon Oct 12 14:14:55 2020 Summary: Recommended update for openssl-1_1 Type: recommended Severity: moderate References: 1177479 This update for openssl-1_1 fixes the following issues: - Restore private key check in EC_KEY_check_key (bsc#1177479) ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:2901-1 Released: Tue Oct 13 14:22:43 2020 Summary: Security update for libproxy Type: security Severity: important References: 1176410,1177143,CVE-2020-25219,CVE-2020-26154 This update for libproxy fixes the following issues: - CVE-2020-25219: Rewrote url::recvline to be nonrecursive (bsc#1176410). - CVE-2020-26154: Fixed a buffer overflow when PAC is enabled (bsc#1177143). ----------------------------------------------------------------- Advisory ID: SUSE-SU-2020:2914-1 Released: Tue Oct 13 17:25:20 2020 Summary: Security update for bind Type: security Severity: moderate References: 1100369,1109160,1118367,1118368,1128220,1156205,1157051,1161168,1170667,1170713,1171313,1171740,1172958,1173307,1173311,1173983,1175443,1176092,1176674,906079,CVE-2017-3136,CVE-2018-5741,CVE-2019-6477,CVE-2020-8616,CVE-2020-8617,CVE-2020-8618,CVE-2020-8619,CVE-2020-8620,CVE-2020-8621,CVE-2020-8622,CVE-2020-8623,CVE-2020-8624 This update for bind fixes the following issues: BIND was upgraded to version 9.16.6: Note: - bind is now more strict in regards to DNSSEC. If queries are not working, check for DNSSEC issues. For instance, if bind is used in a namserver forwarder chain, the forwarding DNS servers must support DNSSEC. Fixing security issues: - CVE-2020-8616: Further limit the number of queries that can be triggered from a request. Root and TLD servers are no longer exempt from max-recursion-queries. Fetches for missing name server. (bsc#1171740) Address records are limited to 4 for any domain. - CVE-2020-8617: Replaying a TSIG BADTIME response as a request could trigger an assertion failure. (bsc#1171740) - CVE-2019-6477: Fixed an issue where TCP-pipelined queries could bypass the tcp-clients limit (bsc#1157051). - CVE-2018-5741: Fixed the documentation (bsc#1109160). - CVE-2020-8618: It was possible to trigger an INSIST when determining whether a record would fit into a TCP message buffer (bsc#1172958). - CVE-2020-8619: It was possible to trigger an INSIST in lib/dns/rbtdb.c:new_reference() with a particular zone content and query patterns (bsc#1172958). - CVE-2020-8624: 'update-policy' rules of type 'subdomain' were incorrectly treated as 'zonesub' rules, which allowed keys used in 'subdomain' rules to update names outside of the specified subdomains. The problem was fixed by making sure 'subdomain' rules are again processed as described in the ARM (bsc#1175443). - CVE-2020-8623: When BIND 9 was compiled with native PKCS#11 support, it was possible to trigger an assertion failure in code determining the number of bits in the PKCS#11 RSA public key with a specially crafted packet (bsc#1175443). - CVE-2020-8621: named could crash in certain query resolution scenarios where QNAME minimization and forwarding were both enabled (bsc#1175443). - CVE-2020-8620: It was possible to trigger an assertion failure by sending a specially crafted large TCP DNS message (bsc#1175443). - CVE-2020-8622: It was possible to trigger an assertion failure when verifying the response to a TSIG-signed request (bsc#1175443). Other issues fixed: - Add engine support to OpenSSL EdDSA implementation. - Add engine support to OpenSSL ECDSA implementation. - Update PKCS#11 EdDSA implementation to PKCS#11 v3.0. - Warn about AXFR streams with inconsistent message IDs. - Make ISC rwlock implementation the default again. - Fixed issues when using cookie-secrets for AES and SHA2 (bsc#1161168) - Installed the default files in /var/lib/named and created chroot environment on systems using transactional-updates (bsc#1100369, fate#325524) - Fixed an issue where bind was not working in FIPS mode (bsc#906079). - Fixed dependency issues (bsc#1118367 and bsc#1118368). - GeoIP support is now discontinued, now GeoIP2 is used(bsc#1156205). - Fixed an issue with FIPS (bsc#1128220). - The liblwres library is discontinued upstream and is no longer included. - Added service dependency on NTP to make sure the clock is accurate when bind is starts (bsc#1170667, bsc#1170713). - Reject DS records at the zone apex when loading master files. Log but otherwise ignore attempts to add DS records at the zone apex via UPDATE. - The default value of 'max-stale-ttl' has been changed from 1 week to 12 hours. - Zone timers are now exported via statistics channel. - The 'primary' and 'secondary' keywords, when used as parameters for 'check-names', were not processed correctly and were being ignored. - 'rndc dnstap -roll ' did not limit the number of saved files to . - Add 'rndc dnssec -status' command. - Addressed a couple of situations where named could crash. - Changed /var/lib/named to owner root:named and perms rwxrwxr-t so that named, being a/the only member of the 'named' group has full r/w access yet cannot change directories owned by root in the case of a compromized named. [bsc#1173307, bind-chrootenv.conf] - Added '/etc/bind.keys' to NAMED_CONF_INCLUDE_FILES in /etc/sysconfig/named to suppress warning message re missing file (bsc#1173983). - Removed '-r /dev/urandom' from all invocations of rndc-confgen (init/named system/lwresd.init system/named.init in vendor-files) as this option is deprecated and causes rndc-confgen to fail. (bsc#1173311, bsc#1176674, bsc#1170713) - /usr/bin/genDDNSkey: Removing the use of the -r option in the call of /usr/sbin/dnssec-keygen as BIND now uses the random number functions provided by the crypto library (i.e., OpenSSL or a PKCS#11 provider) as a source of randomness rather than /dev/random. Therefore the -r command line option no longer has any effect on dnssec-keygen. Leaving the option in genDDNSkey as to not break compatibility. Patch provided by Stefan Eisenwiener. [bsc#1171313] - Put libns into a separate subpackage to avoid file conflicts in the libisc subpackage due to different sonums (bsc#1176092). - Require /sbin/start_daemon: both init scripts, the one used in systemd context as well as legacy sysv, make use of start_daemon.