rte_byteorder.h

Go to the documentation of this file.

/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright(c) 2010-2014 Intel Corporation
 */
 
#ifndef _RTE_BYTEORDER_H_
#define _RTE_BYTEORDER_H_

 
#include <stdint.h>
#ifdef RTE_EXEC_ENV_FREEBSD
#include <sys/endian.h>
#elif defined RTE_EXEC_ENV_LINUX
#include <endian.h>
#endif
 
#include <rte_common.h>
#include <rte_config.h>
 
#ifdef __cplusplus
extern "C" {
#endif
 
/*
 * Compile-time endianness detection
 */
#define RTE_BIG_ENDIAN    1
#define RTE_LITTLE_ENDIAN 2
#if defined __BYTE_ORDER__
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
#define RTE_BYTE_ORDER RTE_BIG_ENDIAN
#elif __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
#define RTE_BYTE_ORDER RTE_LITTLE_ENDIAN
#endif /* __BYTE_ORDER__ */
#elif defined __BYTE_ORDER
#if __BYTE_ORDER == __BIG_ENDIAN
#define RTE_BYTE_ORDER RTE_BIG_ENDIAN
#elif __BYTE_ORDER == __LITTLE_ENDIAN
#define RTE_BYTE_ORDER RTE_LITTLE_ENDIAN
#endif /* __BYTE_ORDER */
#elif defined __BIG_ENDIAN__
#define RTE_BYTE_ORDER RTE_BIG_ENDIAN
#elif defined __LITTLE_ENDIAN__
#define RTE_BYTE_ORDER RTE_LITTLE_ENDIAN
#elif defined RTE_TOOLCHAIN_MSVC
#define RTE_BYTE_ORDER RTE_LITTLE_ENDIAN
#endif
#if !defined(RTE_BYTE_ORDER)
#error Unknown endianness.
#endif
 
#define RTE_STATIC_BSWAP16(v) \
    ((((uint16_t)(v) & UINT16_C(0x00ff)) << 8) | \
     (((uint16_t)(v) & UINT16_C(0xff00)) >> 8))
 
#define RTE_STATIC_BSWAP32(v) \
    ((((uint32_t)(v) & UINT32_C(0x000000ff)) << 24) | \
     (((uint32_t)(v) & UINT32_C(0x0000ff00)) <<  8) | \
     (((uint32_t)(v) & UINT32_C(0x00ff0000)) >>  8) | \
     (((uint32_t)(v) & UINT32_C(0xff000000)) >> 24))
 
#define RTE_STATIC_BSWAP64(v) \
    ((((uint64_t)(v) & UINT64_C(0x00000000000000ff)) << 56) | \
     (((uint64_t)(v) & UINT64_C(0x000000000000ff00)) << 40) | \
     (((uint64_t)(v) & UINT64_C(0x0000000000ff0000)) << 24) | \
     (((uint64_t)(v) & UINT64_C(0x00000000ff000000)) <<  8) | \
     (((uint64_t)(v) & UINT64_C(0x000000ff00000000)) >>  8) | \
     (((uint64_t)(v) & UINT64_C(0x0000ff0000000000)) >> 24) | \
     (((uint64_t)(v) & UINT64_C(0x00ff000000000000)) >> 40) | \
     (((uint64_t)(v) & UINT64_C(0xff00000000000000)) >> 56))
 
/*
 * These macros are functionally similar to rte_cpu_to_(be|le)(16|32|64)(),
 * they take values in host CPU order and return them converted to the
 * intended endianness.
 *
 * They resolve at compilation time to integer constants which can safely be
 * used with static initializers, since those cannot involve function calls.
 *
 * On the other hand, they are not as optimized as their rte_cpu_to_*()
 * counterparts, therefore applications should refrain from using them on
 * variable values, particularly inside performance-sensitive code.
 */
#if RTE_BYTE_ORDER == RTE_BIG_ENDIAN
#define RTE_BE16(v) (rte_be16_t)(v)
#define RTE_BE32(v) (rte_be32_t)(v)
#define RTE_BE64(v) (rte_be64_t)(v)
#define RTE_LE16(v) (rte_le16_t)(RTE_STATIC_BSWAP16(v))
#define RTE_LE32(v) (rte_le32_t)(RTE_STATIC_BSWAP32(v))
#define RTE_LE64(v) (rte_le64_t)(RTE_STATIC_BSWAP64(v))
#elif RTE_BYTE_ORDER == RTE_LITTLE_ENDIAN
#define RTE_BE16(v) (rte_be16_t)(RTE_STATIC_BSWAP16(v))
#define RTE_BE32(v) (rte_be32_t)(RTE_STATIC_BSWAP32(v))
#define RTE_BE64(v) (rte_be64_t)(RTE_STATIC_BSWAP64(v))
#define RTE_LE16(v) (rte_le16_t)(v)
#define RTE_LE32(v) (rte_le32_t)(v)
#define RTE_LE64(v) (rte_le64_t)(v)
#else
#error Unsupported endianness.
#endif
 
/*
 * The following types should be used when handling values according to a
 * specific byte ordering, which may differ from that of the host CPU.
 *
 * Libraries, public APIs and applications are encouraged to use them for
 * documentation purposes.
 */
typedef uint16_t rte_be16_t; 
typedef uint32_t rte_be32_t; 
typedef uint64_t rte_be64_t; 
typedef uint16_t rte_le16_t; 
typedef uint32_t rte_le32_t; 
typedef uint64_t rte_le64_t; 
 
/*
 * An internal function to swap bytes in a 16-bit value.
 *
 * It is used by rte_bswap16() when the value is constant. Do not use
 * this function directly; rte_bswap16() is preferred.
 */
static inline uint16_t
rte_constant_bswap16(uint16_t x)
{
    return (uint16_t)RTE_STATIC_BSWAP16(x);
}
 
/*
 * An internal function to swap bytes in a 32-bit value.
 *
 * It is used by rte_bswap32() when the value is constant. Do not use
 * this function directly; rte_bswap32() is preferred.
 */
static inline uint32_t
rte_constant_bswap32(uint32_t x)
{
    return (uint32_t)RTE_STATIC_BSWAP32(x);
}
 
/*
 * An internal function to swap bytes of a 64-bit value.
 *
 * It is used by rte_bswap64() when the value is constant. Do not use
 * this function directly; rte_bswap64() is preferred.
 */
static inline uint64_t
rte_constant_bswap64(uint64_t x)
{
    return (uint64_t)RTE_STATIC_BSWAP64(x);
}
 
 
#ifdef __DOXYGEN__

static uint16_t rte_bswap16(uint16_t _x);

static uint32_t rte_bswap32(uint32_t x);

static uint64_t rte_bswap64(uint64_t x);

static rte_le16_t rte_cpu_to_le_16(uint16_t x);

static rte_le32_t rte_cpu_to_le_32(uint32_t x);

static rte_le64_t rte_cpu_to_le_64(uint64_t x);
 

static rte_be16_t rte_cpu_to_be_16(uint16_t x);

static rte_be32_t rte_cpu_to_be_32(uint32_t x);

static rte_be64_t rte_cpu_to_be_64(uint64_t x);
 

static uint16_t rte_le_to_cpu_16(rte_le16_t x);

static uint32_t rte_le_to_cpu_32(rte_le32_t x);

static uint64_t rte_le_to_cpu_64(rte_le64_t x);
 

static uint16_t rte_be_to_cpu_16(rte_be16_t x);

static uint32_t rte_be_to_cpu_32(rte_be32_t x);

static uint64_t rte_be_to_cpu_64(rte_be64_t x);
 
#endif /* __DOXYGEN__ */
 
#ifdef RTE_FORCE_INTRINSICS
#ifndef RTE_TOOLCHAIN_MSVC
#define rte_bswap16(x) __builtin_bswap16(x)
 
#define rte_bswap32(x) __builtin_bswap32(x)
 
#define rte_bswap64(x) __builtin_bswap64(x)
#else
#define rte_bswap16(x) _byteswap_ushort(x)
 
#define rte_bswap32(x) _byteswap_ulong(x)
 
#define rte_bswap64(x) _byteswap_uint64(x)
#endif
#endif
 
#ifdef __cplusplus
}
#endif
 
#endif /* _RTE_BYTEORDER_H_ */