# medit manual

1.2.92-devel

# Chapter 1. Preferences

## Preferences dialog

Preferences provides access to almost all medit settings. Some settings are not available here, see the section called “Preferences files”.

Preferences dialog has several tabs:

General
  Contains settings which didn't find place in other sections, see the section called “General tab”.
View
  Contains settings which control how medit displays text.
File
  Contains settings which control how medit saves and loads files, see the section called “File tab”.
Languages
  See the section called “Languages tab”.
File Filters
  See the section called “File filters tab”.
Plugins
  Displays information about available plugings and allows to disable/enable them.
File Selector
  Contains File Selector settings, see the section called “File Selector tab”.
Tools
  User-defined tools, see the section called “Managing tools in Preferences dialog”.

## General tab

`Smart Home and End`
  If checked, Home key moves cursor to first non-whitespace character on the line on first Home key press, and moves cursor to the first character on the line on second key press. Analogously End key moves cursor past last non-whitespace character on the line, and then past last character on next key press.
`Enable auto indentation`
  If checked, pressing Enter key inserts line end character and whitespace to indent next line according to indentation settings.
`Do not use tabs for indentation`
  If checked, spaces are used for indentation instead of tab character.
`Tab key indents`
  If checked, Tab key inserts whitespace characters according to indentation settings to indent text at cursor. Otherwise Tab key only inserts single tab character.
`Tab width`
  Displayed width of tab character in spaces. By default it is `8`.
`Indent width`
  Number of spaces inserted by single Tab key press. If tabs are used for indentation then Tab key inserts spaces until line indent is multiple of tab width, then it replaces spaces with tabs (if indent width is a multiple of tab width then only tab characters are used.)

## File tab

`Encodings to autodetect`

  This entry contains comma-separated list of encodings used when loading files if encoding is not specified in the Open. medit tries every encoding from the list one by one and stops when file content is valid text in this encoding. `LOCALE` denotes encoding from current locale.

`Encoding for new files`

  This is default encoding to save new files. For every document its encoding on disk can be changed using Encoding submenu of Document menu.

`Remove trailing spaces`

  If checked, trailing whitespace characters are removed from each line of the document on save.

`Ensure trailing newline`

  If checked, new line character will be added to document on save if it doesn't end with one.

`Make backups`

  If checked, old file contents will be moved to backup file on save.

`Enable session support`

  If checked, medit will remember open documents on exit and restore them next time it's launched.

`Open and Save As dialogs show current document folder`

  If checked, Open and Save As dialogs will show folder of the current document. Otherwise they will show last used folder.

## Languages tab

Languages and files tab allows customizing how syntax highlighting language and editing options are chosen depending on the document filename, as well as setting editing options for all documents which use given language and choosing file patterns and mime types for which the given language should be used.

Here you can set editing options on per-language basis, as well as define for which file patterns and mime types given language should be used.

Language combo box

  Choose the language you want to customize. Settings for `None` will apply to documents for which no syntax highlighting language was chosen.

Mime types

  Selected language will be used for files with these mime types, unless the language is chosen based on the filename or overridden in the File filters tab section.

Extensions

  Selected language will be used for files whose filenames match these patterns, unless overridden in the File filters tab section.

Options

  Default editing options to use in documents which use the given language. These options can be overridden using File filters tab section, and options set in the file text have a higher priority as well. See the section called “Options for editing text” for format of this entry content.

## File filters tab

File filters tab section allows to customize editing options, as well as syntax highlighting language, on per-document basis using regular expressions which are matched against the document filename (globs can also be used, see below). Full file paths are used, so one can have per-directory settings.

The filters are applied in the order they appear in the list, one by one. All filters are applied to every file, so several filters may affect options in the same file. In this way one can set some options for a set of files or a directory, then set or modify some additional options for certain files in that set, etc.

To add a filter, use New button. Click the filter in the list to select it, then click the Filter or Options part of it to edit. Use Delete button to delete a filter, and Up and Down buttons to change the order in which they are applied.

Filter field contains a regular expression matched agains the document filename. If it is found in the filename, then the options from the Options field are applied to the document. Example:

    projects/moo/

Use dollar if you need to match ends of filenames, e.g. "`\.doc$`" will work as "`*.doc`" pattern.

Alternatively it can be a comma-separated list of globs prefixed with "`globs:`" or a list of language ids prefixed with "`langs:`", e.g.

    globs:*.c,*.h

or

    langs:c,c++

Options field contains the options, in format described in the section called “Options for editing text”.

## File Selector tab

File Selector tab in the Preferences dialog allows to define custom commands which are available in Open With submenu of context menu in File Selector. By default this submenu contains single item Default Application which opens selected file with default application as configured in the system. Here you can add additional commands and set whether they should be available only for given file patterns or syntax highlighting languages.

Use New button to create new command, Delete button to delete selected command, and Up and Down to change relative order of the commands, they will appear in the menu in the same order as in this list.

The following entries set the command properties:

`Name` | Menu item label for this command.
`Command` | Shell command to execute when the menu item is activated. `%f` will be replaced with full path of the selected file; if more than one file is selected then the command will be executed for each file one by one. If `command` contains `%F` and several files are selected then `%F` will be replaced with the space-separated list of paths of all selected files. If a single file is selected then `%f` and `%F` behave in the same way. Example: `firefox %f`, `glade %F`
`Extensions` | Semicolon-separated list of file patterns to define for which files this command is available, e.g. `*.c;*.h`. Use `*` if the command should be available for all files.
`Mime types` | Semicolon-separated list of mime types to define for which files this command is available, e.g. `application/docbook+xml;application/x-glade`. Leave it empty if `Extensions` entry defines whether the command should be enabled.

## Options for editing text

medit has some editing options which can be set in the document text, or in the Preferences dialog for sets of files or for given syntax highlighting language.

To set the options in the document text, place the following on the first, second or the last line of the document:

    -%- options -%-

where `options` is the option string

    key: value; key: value; ...

(the latter is the format used also in the Preferences dialog).

For example, the following might be the first line in a C file:

    /* -%- indent-width: 2; use-tabs: yes; strip: yes -%- */

Values can be strings, integers, or booleans.

Booleans are `yes`, `no`, `true`, `false`, `1`, `0`.

If a string value contains `:` character, then the following syntax may be used: ``key`=/`value`/`. Any character may be used instead of slash (and it must not occur in the `value`). Example: `word-chars=@-/:@`

The following options are available:

`lang` : | syntax highlighting language to use in this document. Special value `none` will turn off syntax highlighting in this document.
`strip` : | a boolean value, whether trailing whitespace should be removed from the document on save.
`add-newline` : | a boolean value, whether the editor should ensure that saved files have a trailing new line character.
`indent-width` : | an integer specifying indentation offset used when the Tab key is pressed to indent text.
`tab-width` : | displayed width of the tab character. Note that this is not the same as `indent-width`.
`use-tabs` : | whether tab character should be used for indentation.

medit tries to understand modelines of Vim, Emacs, and Kate text editors, so chances are it will correctly pick up the conventional settings from source files.

## Preferences files

medit preferences are stored in `$HOME/.local/share/medit/prefs.xml` file. It is an XML file which may be edited to set preferences which have not found their place in the Preferences dialog.

### Note

medit reads the preferences file on startup and writes it whenever OK or Apply button is clicked in the Preferences dialog. Therefore, if you modify the preferences file, your changes may be overwritten, and they not take effect until you restart medit.

The following "hidden" settings are available:

`Editor/window_title`

  Format of the window title. It is a string which may contain format sequences, which are percent sign followed by a character:

  `%a` : | application name
  `%b` : | current document basename
  `%f` : | full path of the current document
  `%u` : | URI of the current document
  `%s` : | the status of the current document, e.g. "`[modified]`". It is prefixed with a space, so that "`%b%s`" produces a nice string
  `%%` : | the percent character

  Default value is "`%a - %f%s`" which produces something like "`medit - /home/user/file [modified]`".

`Editor/window_title_no_doc`

  same as `Editor/window_title`, used when no document is open. Default value is "`%a`".

# Chapter 2. Regular expressions

medit uses regular expressions functionality provided by Glib, which in turn uses PCRE library. See Glib manual for complete description of regular expression syntax.

Regular expression searches in a document text are limited to single lines, unless the search pattern includes newline character. For example, pattern "`.*`" will match every line in the document, pattern "`.*\n.*`" will match pairs of consecutive lines. This means that it is mostly impossible to perform searches for text which spawns multiple lines.

# Chapter 3. User-defined tools

medit allows extending its functionality with user-defined `tools`. It can be a Lua script or a Python script (if medit has been built with Python support) which are executed inside medit, or a shell script which can use the text of the open document as its input and/or output.

There are some predefined tools which you can use as an example or to modify to suit your needs.

## Managing tools in Preferences dialog

To create a new tool or to modify existing ones, open Preferences dialog and select Tools in the list on the left.

Select the tool in the list or click the New button to create a new one. To modify the order in which tools appear in the Tools menu (or in the document context menu), use Up and Down buttons. To rename a tool, click its name in the list to select it and then click again to edit the name. Use the Delete button to delete a tool.

The following controls are available to modify tools:

- `Files` entry specifies for which files the tool is going to be available. It can contain the following:

  - a comma-separated list of file patterns, e.g.

        *.c,*.h

  - a comma-separated list of languages prefixed with "`langs:`", e.g.

        langs: c, c++, objc

  - a regular expression matching document filename prefixed with "`regex:`", e.g. the above pattern list may be written as

        regex:\.[ch]$

  Empty entry means that the tool will be available for all documents.

- `Requires` combo box specifies whether the tool should be enabled depending on current document.

  `Nothing` | the tool is enabled regardless whether there is an open document.
  `Document` | the tool is enabled only if there is an open document. For example, if the tool manipulates current document text, then it needs a document to be there.
  `File on disk` | the tool is enabled only if current document is saved on disk (i.e. it is not "Untitled"). For example, to compile a TeX file, it needs to be saved first.

- `Save` combo box specifies what should be saved every time before the command is executed.

  `Nothing` | nothing will be saved.
  `Current document` | current document will be automatically saved. For example, you probably want to save currrent document before compiling it with latex.
  `All documents` | all open documents will be automatically saved. For example, if the tool builds a C project, then you probably want to save all open files before running make.

- `Type` combo specifies the type of the tool: a Python script, a Lua script, or a shell script.
- Code text field contains script or shell command text. See the section called “Shell scripts”, the section called “Lua scripts”, the section called “Python scripts” for details on what can be here.

## Storing tools in files

It is possible to create tools without using the Preferences dialog, they can be stored in files in `tools` subfolder of the medit data folders (or `tools-context` for tools which appear in the document context menu). In particular, on Unix systems you can place files into `$HOME/.local/share/medit/tools/` folder.

Names of the files in the `tools` folder are used as their menu item labels, after stripping first three characters, so you can use trhee-character prefix to affect the order of the menu items, e.g. you can have `00-Do Something`, `01-Another tool` files to have them in that order in the menu. The files may be of three types:

- files with extension "`.py`", they will be used as Python scripts;
- files with extension "`.lua`", they will be used as Lua scripts;
- executable files, they will be executed in the same way as shell commands.

Note that files with `.py` and `.lua` extensions will be executed inside medit process; if you want to use them as regular scripts, then just remove the extension.

To set parameters for a tool, place them on the first or the second line of the file in the following format:

    !! key=value; key=value; ... !!

`key` may be one of the following:

`position` | it can be `start` or `end`, and it defines whether the menu item will be located at the start or at the end of the menu.
`id` | the tool identificator.
`name` | the tool name, i.e. the label used in the menu item. Overrides the file name.
`accel` | default keyboard accelerator used to invoke this tool.
`menu` | the menu to place this tool into. By default tools are located in the Tools menu, but they can be as well put into any other menu.
`langs` | comma-separated list of languages for which this tool will be enabled.
`file-filter` | defines for which files this tool will be enabled. The value has the same format as in the Preferences dialog.
`options` | this corresponds to Requires and Save controls in the Preferences dialog. It is a comma-separated list of the following:
`need-doc` | tool will be enabled only if there is an open document.
`need-file` | tool will be enabled only if current document is saved on disk (i.e. it is not "Untitled").
`need-save` | current document will be automatically saved before the command is executed.
`need-save-all` | all open documents will be automatically saved before the command is executed.

In addition to these, you can set input and output options for executable files (see the section called “Shell scripts” for the meaning of these options):

`input` | `none`, `lines`, `selection`, or `doc`.
`output` | `none`, `async`, `pane`, `insert`, or `new-doc`.
`filter` | output filter name.

## Shell scripts

Shell script user tools execute command entered in the Command text field using default user shell on Unix systems or cmd.exe on Windows.

Its input and output are specified by the following controls:

- `Input` entry specifies what text from the document should be passed to the command. The text is passed via command's standard input, except for `Document copy` case.

  `None` | no input text.
  `Selected lines` | the lines containing selection or the line containing the cursor in case when no text is selected.
  `Selection` | exact selected text. This will be different from `Selected lines` if selection does not span whole lines of the document, for instance if it is a single word.
  `Whole document` | whole document contents.
  `Document copy` | document contents will be saved to a temporary file and the file path will be stored in `INPUT_FILE` environment variable. No text will be passed to the command via standard input.

- `Output` entry specifies how the standard output of the command should be redirected.

  `None` | the command output will be discarded.
  `None, asynchronous` | the command output will be discarded, and the command will be executed in background. Use this if you need to launch some external program like a web browser.
  `Output pane` | the command output will be displayed in an output pane. This is useful for running programs like compilers, where you want to see the output.
  `Insert into the document` | output will be inserted into the current document at the cursor position. It will replace the text used as an input, if any.
  `New document` | new document will be created and the command output will be inserted into it.

- `Filter` combo. If the output pane is used, then it can be passed through a `filter`: the filter can match filenames and line numbers, so when you click the text in the output pane it will open the corresponding file. This is used for compilers and similar commands, which output locations of errors in processed files.

Shell script user tools have a number of environment variables set. `APP_PID` variable is set so that opening a file in the same instance of medit is as simple as `medit filename` (on the other hand, you will have to use command line options if you need to run a new medit instance). The following environment variables are set when scripts are executed:

`APP_PID` | current process id.
`DOC` | document basename ("`file.c`" for file `/home/user/file.c`).
`DOC_DIR` | document directory ("`/home/user`" for file `/home/user/file.c`). Full file path is ``$DOC_DIR`/`$DOC``.
`DOC_BASE` | basename without extension ("`file`" for file `/home/user/file.c`).
`DOC_EXT` | document filename extension including the period ("`.c`" for file `/home/user/file.c`). Basename is always ``$DOC_BASE``$DOC_EXT``.
`DOC_PATH` | full document path.
`LINE` | `1`-based number of the line containing cursor. For example, if cursor is at the first line then `LINE` will be set to `1`.
`LINE0` | `0`-based number of the line containing cursor. For example, if cursor is at the first line then `LINE0` will be set to `0`.
`DATA_DIR` | user data directory (`$HOME/.local/share/medit/` on Unix systems).
`INPUT_FILE` | if `input` was set to "Document copy" then this is set to full path of the temporary file containing document text.

Additionally, all shell commands which run inside medit will have ``DATA_DIR`/scripts` directories in `$PATH`, so you may place some medit-specific programs or scripts into ``DATA_DIR`/scripts/` to be used from shell script tools.

## Lua scripts

Medit API for Lua scripts.

Gtk API for Lua scripts.

## Python scripts

Medit API for Python scripts.

# Chapter 4. License

medit as a whole is distributed under the terms of the GNU General Public License, version 2, but most of its code is released under the GNU Lesser General Public License. Full text of these licenses, as well as licenses and acknowledgements for third-party software incorporated in medit, can be found in this section.

## GNU General Public License

GNU GENERAL PUBLIC LICENSE
Version 2, June 1991
Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users. This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it. (Some other Free Software Foundation software is covered by
the GNU Lesser General Public License instead.) You can apply it to
your programs, too.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it
in new free programs; and that you know you can do these things.
To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.
For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have. You must make sure that they, too, receive or can get the
source code. And you must show them these terms so they know their
rights.
We protect your rights with two steps: (1) copyright the software, and
(2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.
Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software. If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.
Finally, any free program is threatened constantly by software
patents. We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary. To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.
The precise terms and conditions for copying, distribution and
modification follow.
GNU GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License applies to any program or other work which contains
a notice placed by the copyright holder saying it may be distributed
under the terms of this General Public License. The "Program", below,
refers to any such program or work, and a "work based on the Program"
means either the Program or any derivative work under copyright law:
that is to say, a work containing the Program or a portion of it,
either verbatim or with modifications and/or translated into another
language. (Hereinafter, translation is included without limitation in
the term "modification".) Each licensee is addressed as "you".
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running the Program is not restricted, and the output from the Program
is covered only if its contents constitute a work based on the
Program (independent of having been made by running the Program).
Whether that is true depends on what the Program does.
1. You may copy and distribute verbatim copies of the Program's
source code as you receive it, in any medium, provided that you
conspicuously and appropriately publish on each copy an appropriate
copyright notice and disclaimer of warranty; keep intact all the
notices that refer to this License and to the absence of any warranty;
and give any other recipients of the Program a copy of this License
along with the Program.
You may charge a fee for the physical act of transferring a copy, and
you may at your option offer warranty protection in exchange for a fee.
2. You may modify your copy or copies of the Program or any portion
of it, thus forming a work based on the Program, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) You must cause the modified files to carry prominent notices
stating that you changed the files and the date of any change.
b) You must cause any work that you distribute or publish, that in
whole or in part contains or is derived from the Program or any
part thereof, to be licensed as a whole at no charge to all third
parties under the terms of this License.
c) If the modified program normally reads commands interactively
when run, you must cause it, when started running for such
interactive use in the most ordinary way, to print or display an
announcement including an appropriate copyright notice and a
notice that there is no warranty (or else, saying that you provide
a warranty) and that users may redistribute the program under
these conditions, and telling the user how to view a copy of this
License. (Exception: if the Program itself is interactive but
does not normally print such an announcement, your work based on
the Program is not required to print an announcement.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Program,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Program, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Program.
In addition, mere aggregation of another work not based on the Program
with the Program (or with a work based on the Program) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may copy and distribute the Program (or a work based on it,
under Section 2) in object code or executable form under the terms of
Sections 1 and 2 above provided that you also do one of the following:
a) Accompany it with the complete corresponding machine-readable
source code, which must be distributed under the terms of Sections
1 and 2 above on a medium customarily used for software interchange; or,
b) Accompany it with a written offer, valid for at least three
years, to give any third party, for a charge no more than your
cost of physically performing source distribution, a complete
machine-readable copy of the corresponding source code, to be
distributed under the terms of Sections 1 and 2 above on a medium
customarily used for software interchange; or,
c) Accompany it with the information you received as to the offer
to distribute corresponding source code. (This alternative is
allowed only for noncommercial distribution and only if you
received the program in object code or executable form with such
an offer, in accord with Subsection b above.)
The source code for a work means the preferred form of the work for
making modifications to it. For an executable work, complete source
code means all the source code for all modules it contains, plus any
associated interface definition files, plus the scripts used to
control compilation and installation of the executable. However, as a
special exception, the source code distributed need not include
anything that is normally distributed (in either source or binary
form) with the major components (compiler, kernel, and so on) of the
operating system on which the executable runs, unless that component
itself accompanies the executable.
If distribution of executable or object code is made by offering
access to copy from a designated place, then offering equivalent
access to copy the source code from the same place counts as
distribution of the source code, even though third parties are not
compelled to copy the source along with the object code.
4. You may not copy, modify, sublicense, or distribute the Program
except as expressly provided under this License. Any attempt
otherwise to copy, modify, sublicense or distribute the Program is
void, and will automatically terminate your rights under this License.
However, parties who have received copies, or rights, from you under
this License will not have their licenses terminated so long as such
parties remain in full compliance.
5. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Program or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Program (or any work based on the
Program), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Program or works based on it.
6. Each time you redistribute the Program (or any work based on the
Program), the recipient automatically receives a license from the
original licensor to copy, distribute or modify the Program subject to
these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties to
this License.
7. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Program at all. For example, if a patent
license would not permit royalty-free redistribution of the Program by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Program.
If any portion of this section is held invalid or unenforceable under
any particular circumstance, the balance of the section is intended to
apply and the section as a whole is intended to apply in other
circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system, which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
8. If the distribution and/or use of the Program is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Program under this License
may add an explicit geographical distribution limitation excluding
those countries, so that distribution is permitted only in or among
countries not thus excluded. In such case, this License incorporates
the limitation as if written in the body of this License.
9. The Free Software Foundation may publish revised and/or new versions
of the General Public License from time to time. Such new versions will
be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the Program
specifies a version number of this License which applies to it and "any
later version", you have the option of following the terms and conditions
either of that version or of any later version published by the Free
Software Foundation. If the Program does not specify a version number of
this License, you may choose any version ever published by the Free Software
Foundation.
10. If you wish to incorporate parts of the Program into other free
programs whose distribution conditions are different, write to the author
to ask for permission. For software which is copyrighted by the Free
Software Foundation, write to the Free Software Foundation; we sometimes
make exceptions for this. Our decision will be guided by the two goals
of preserving the free status of all derivatives of our free software and
of promoting the sharing and reuse of software generally.
NO WARRANTY
11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
REPAIR OR CORRECTION.
12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License along
with this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
Also add information on how to contact you by electronic and paper mail.
If the program is interactive, make it output a short notice like this
when it starts in an interactive mode:
Gnomovision version 69, Copyright (C) year name of author
Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
This is free software, and you are welcome to redistribute it
under certain conditions; type `show c' for details.
The hypothetical commands `show w' and `show c' should show the appropriate
parts of the General Public License. Of course, the commands you use may
be called something other than `show w' and `show c'; they could even be
mouse-clicks or menu items--whatever suits your program.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the program, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the program
`Gnomovision' (which makes passes at compilers) written by James Hacker.
<signature of Ty Coon>, 1 April 1989
Ty Coon, President of Vice
This General Public License does not permit incorporating your program into
proprietary programs. If your program is a subroutine library, you may
consider it more useful to permit linking proprietary applications with the
library. If this is what you want to do, use the GNU Lesser General
Public License instead of this License.

## GNU Lesser General Public License

GNU LESSER GENERAL PUBLIC LICENSE
Version 2.1, February 1999
Copyright (C) 1991, 1999 Free Software Foundation, Inc.
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
[This is the first released version of the Lesser GPL. It also counts
as the successor of the GNU Library Public License, version 2, hence
the version number 2.1.]
Preamble
The licenses for most software are designed to take away your
freedom to share and change it. By contrast, the GNU General Public
Licenses are intended to guarantee your freedom to share and change
free software--to make sure the software is free for all its users.
This license, the Lesser General Public License, applies to some
specially designated software packages--typically libraries--of the
Free Software Foundation and other authors who decide to use it. You
can use it too, but we suggest you first think carefully about whether
this license or the ordinary General Public License is the better
strategy to use in any particular case, based on the explanations below.
When we speak of free software, we are referring to freedom of use,
not price. Our General Public Licenses are designed to make sure that
you have the freedom to distribute copies of free software (and charge
for this service if you wish); that you receive source code or can get
it if you want it; that you can change the software and use pieces of
it in new free programs; and that you are informed that you can do
these things.
To protect your rights, we need to make restrictions that forbid
distributors to deny you these rights or to ask you to surrender these
rights. These restrictions translate to certain responsibilities for
you if you distribute copies of the library or if you modify it.
For example, if you distribute copies of the library, whether gratis
or for a fee, you must give the recipients all the rights that we gave
you. You must make sure that they, too, receive or can get the source
code. If you link other code with the library, you must provide
complete object files to the recipients, so that they can relink them
with the library after making changes to the library and recompiling
it. And you must show them these terms so they know their rights.
We protect your rights with a two-step method: (1) we copyright the
library, and (2) we offer you this license, which gives you legal
permission to copy, distribute and/or modify the library.
To protect each distributor, we want to make it very clear that
there is no warranty for the free library. Also, if the library is
modified by someone else and passed on, the recipients should know
that what they have is not the original version, so that the original
author's reputation will not be affected by problems that might be
introduced by others.
Finally, software patents pose a constant threat to the existence of
any free program. We wish to make sure that a company cannot
effectively restrict the users of a free program by obtaining a
restrictive license from a patent holder. Therefore, we insist that
any patent license obtained for a version of the library must be
consistent with the full freedom of use specified in this license.
Most GNU software, including some libraries, is covered by the
ordinary GNU General Public License. This license, the GNU Lesser
General Public License, applies to certain designated libraries, and
is quite different from the ordinary General Public License. We use
this license for certain libraries in order to permit linking those
libraries into non-free programs.
When a program is linked with a library, whether statically or using
a shared library, the combination of the two is legally speaking a
combined work, a derivative of the original library. The ordinary
General Public License therefore permits such linking only if the
entire combination fits its criteria of freedom. The Lesser General
Public License permits more lax criteria for linking other code with
the library.
We call this license the "Lesser" General Public License because it
does Less to protect the user's freedom than the ordinary General
Public License. It also provides other free software developers Less
of an advantage over competing non-free programs. These disadvantages
are the reason we use the ordinary General Public License for many
libraries. However, the Lesser license provides advantages in certain
special circumstances.
For example, on rare occasions, there may be a special need to
encourage the widest possible use of a certain library, so that it becomes
a de-facto standard. To achieve this, non-free programs must be
allowed to use the library. A more frequent case is that a free
library does the same job as widely used non-free libraries. In this
case, there is little to gain by limiting the free library to free
software only, so we use the Lesser General Public License.
In other cases, permission to use a particular library in non-free
programs enables a greater number of people to use a large body of
free software. For example, permission to use the GNU C Library in
non-free programs enables many more people to use the whole GNU
operating system, as well as its variant, the GNU/Linux operating
system.
Although the Lesser General Public License is Less protective of the
users' freedom, it does ensure that the user of a program that is
linked with the Library has the freedom and the wherewithal to run
that program using a modified version of the Library.
The precise terms and conditions for copying, distribution and
modification follow. Pay close attention to the difference between a
"work based on the library" and a "work that uses the library". The
former contains code derived from the library, whereas the latter must
be combined with the library in order to run.
GNU LESSER GENERAL PUBLIC LICENSE
TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
0. This License Agreement applies to any software library or other
program which contains a notice placed by the copyright holder or
other authorized party saying it may be distributed under the terms of
this Lesser General Public License (also called "this License").
Each licensee is addressed as "you".
A "library" means a collection of software functions and/or data
prepared so as to be conveniently linked with application programs
(which use some of those functions and data) to form executables.
The "Library", below, refers to any such software library or work
which has been distributed under these terms. A "work based on the
Library" means either the Library or any derivative work under
copyright law: that is to say, a work containing the Library or a
portion of it, either verbatim or with modifications and/or translated
straightforwardly into another language. (Hereinafter, translation is
included without limitation in the term "modification".)
"Source code" for a work means the preferred form of the work for
making modifications to it. For a library, complete source code means
all the source code for all modules it contains, plus any associated
interface definition files, plus the scripts used to control compilation
and installation of the library.
Activities other than copying, distribution and modification are not
covered by this License; they are outside its scope. The act of
running a program using the Library is not restricted, and output from
such a program is covered only if its contents constitute a work based
on the Library (independent of the use of the Library in a tool for
writing it). Whether that is true depends on what the Library does
and what the program that uses the Library does.
1. You may copy and distribute verbatim copies of the Library's
complete source code as you receive it, in any medium, provided that
you conspicuously and appropriately publish on each copy an
appropriate copyright notice and disclaimer of warranty; keep intact
all the notices that refer to this License and to the absence of any
warranty; and distribute a copy of this License along with the
Library.
You may charge a fee for the physical act of transferring a copy,
and you may at your option offer warranty protection in exchange for a
fee.
2. You may modify your copy or copies of the Library or any portion
of it, thus forming a work based on the Library, and copy and
distribute such modifications or work under the terms of Section 1
above, provided that you also meet all of these conditions:
a) The modified work must itself be a software library.
b) You must cause the files modified to carry prominent notices
stating that you changed the files and the date of any change.
c) You must cause the whole of the work to be licensed at no
charge to all third parties under the terms of this License.
d) If a facility in the modified Library refers to a function or a
table of data to be supplied by an application program that uses
the facility, other than as an argument passed when the facility
is invoked, then you must make a good faith effort to ensure that,
in the event an application does not supply such function or
table, the facility still operates, and performs whatever part of
its purpose remains meaningful.
(For example, a function in a library to compute square roots has
a purpose that is entirely well-defined independent of the
application. Therefore, Subsection 2d requires that any
application-supplied function or table used by this function must
be optional: if the application does not supply it, the square
root function must still compute square roots.)
These requirements apply to the modified work as a whole. If
identifiable sections of that work are not derived from the Library,
and can be reasonably considered independent and separate works in
themselves, then this License, and its terms, do not apply to those
sections when you distribute them as separate works. But when you
distribute the same sections as part of a whole which is a work based
on the Library, the distribution of the whole must be on the terms of
this License, whose permissions for other licensees extend to the
entire whole, and thus to each and every part regardless of who wrote
it.
Thus, it is not the intent of this section to claim rights or contest
your rights to work written entirely by you; rather, the intent is to
exercise the right to control the distribution of derivative or
collective works based on the Library.
In addition, mere aggregation of another work not based on the Library
with the Library (or with a work based on the Library) on a volume of
a storage or distribution medium does not bring the other work under
the scope of this License.
3. You may opt to apply the terms of the ordinary GNU General Public
License instead of this License to a given copy of the Library. To do
this, you must alter all the notices that refer to this License, so
that they refer to the ordinary GNU General Public License, version 2,
instead of to this License. (If a newer version than version 2 of the
ordinary GNU General Public License has appeared, then you can specify
that version instead if you wish.) Do not make any other change in
these notices.
Once this change is made in a given copy, it is irreversible for
that copy, so the ordinary GNU General Public License applies to all
subsequent copies and derivative works made from that copy.
This option is useful when you wish to copy part of the code of
the Library into a program that is not a library.
4. You may copy and distribute the Library (or a portion or
derivative of it, under Section 2) in object code or executable form
under the terms of Sections 1 and 2 above provided that you accompany
it with the complete corresponding machine-readable source code, which
must be distributed under the terms of Sections 1 and 2 above on a
medium customarily used for software interchange.
If distribution of object code is made by offering access to copy
from a designated place, then offering equivalent access to copy the
source code from the same place satisfies the requirement to
distribute the source code, even though third parties are not
compelled to copy the source along with the object code.
5. A program that contains no derivative of any portion of the
Library, but is designed to work with the Library by being compiled or
linked with it, is called a "work that uses the Library". Such a
work, in isolation, is not a derivative work of the Library, and
therefore falls outside the scope of this License.
However, linking a "work that uses the Library" with the Library
creates an executable that is a derivative of the Library (because it
contains portions of the Library), rather than a "work that uses the
library". The executable is therefore covered by this License.
Section 6 states terms for distribution of such executables.
When a "work that uses the Library" uses material from a header file
that is part of the Library, the object code for the work may be a
derivative work of the Library even though the source code is not.
Whether this is true is especially significant if the work can be
linked without the Library, or if the work is itself a library. The
threshold for this to be true is not precisely defined by law.
If such an object file uses only numerical parameters, data
structure layouts and accessors, and small macros and small inline
functions (ten lines or less in length), then the use of the object
file is unrestricted, regardless of whether it is legally a derivative
work. (Executables containing this object code plus portions of the
Library will still fall under Section 6.)
Otherwise, if the work is a derivative of the Library, you may
distribute the object code for the work under the terms of Section 6.
Any executables containing that work also fall under Section 6,
whether or not they are linked directly with the Library itself.
6. As an exception to the Sections above, you may also combine or
link a "work that uses the Library" with the Library to produce a
work containing portions of the Library, and distribute that work
under terms of your choice, provided that the terms permit
modification of the work for the customer's own use and reverse
engineering for debugging such modifications.
You must give prominent notice with each copy of the work that the
Library is used in it and that the Library and its use are covered by
this License. You must supply a copy of this License. If the work
during execution displays copyright notices, you must include the
copyright notice for the Library among them, as well as a reference
directing the user to the copy of this License. Also, you must do one
of these things:
a) Accompany the work with the complete corresponding
machine-readable source code for the Library including whatever
changes were used in the work (which must be distributed under
Sections 1 and 2 above); and, if the work is an executable linked
with the Library, with the complete machine-readable "work that
uses the Library", as object code and/or source code, so that the
user can modify the Library and then relink to produce a modified
executable containing the modified Library. (It is understood
that the user who changes the contents of definitions files in the
Library will not necessarily be able to recompile the application
to use the modified definitions.)
b) Use a suitable shared library mechanism for linking with the
Library. A suitable mechanism is one that (1) uses at run time a
copy of the library already present on the user's computer system,
rather than copying library functions into the executable, and (2)
will operate properly with a modified version of the library, if
the user installs one, as long as the modified version is
interface-compatible with the version that the work was made with.
c) Accompany the work with a written offer, valid for at
least three years, to give the same user the materials
specified in Subsection 6a, above, for a charge no more
than the cost of performing this distribution.
d) If distribution of the work is made by offering access to copy
from a designated place, offer equivalent access to copy the above
specified materials from the same place.
e) Verify that the user has already received a copy of these
materials or that you have already sent this user a copy.
For an executable, the required form of the "work that uses the
Library" must include any data and utility programs needed for
reproducing the executable from it. However, as a special exception,
the materials to be distributed need not include anything that is
normally distributed (in either source or binary form) with the major
components (compiler, kernel, and so on) of the operating system on
which the executable runs, unless that component itself accompanies
the executable.
It may happen that this requirement contradicts the license
restrictions of other proprietary libraries that do not normally
accompany the operating system. Such a contradiction means you cannot
use both them and the Library together in an executable that you
distribute.
7. You may place library facilities that are a work based on the
Library side-by-side in a single library together with other library
facilities not covered by this License, and distribute such a combined
library, provided that the separate distribution of the work based on
the Library and of the other library facilities is otherwise
permitted, and provided that you do these two things:
a) Accompany the combined library with a copy of the same work
based on the Library, uncombined with any other library
facilities. This must be distributed under the terms of the
Sections above.
b) Give prominent notice with the combined library of the fact
that part of it is a work based on the Library, and explaining
where to find the accompanying uncombined form of the same work.
8. You may not copy, modify, sublicense, link with, or distribute
the Library except as expressly provided under this License. Any
attempt otherwise to copy, modify, sublicense, link with, or
distribute the Library is void, and will automatically terminate your
rights under this License. However, parties who have received copies,
or rights, from you under this License will not have their licenses
terminated so long as such parties remain in full compliance.
9. You are not required to accept this License, since you have not
signed it. However, nothing else grants you permission to modify or
distribute the Library or its derivative works. These actions are
prohibited by law if you do not accept this License. Therefore, by
modifying or distributing the Library (or any work based on the
Library), you indicate your acceptance of this License to do so, and
all its terms and conditions for copying, distributing or modifying
the Library or works based on it.
10. Each time you redistribute the Library (or any work based on the
Library), the recipient automatically receives a license from the
original licensor to copy, distribute, link with or modify the Library
subject to these terms and conditions. You may not impose any further
restrictions on the recipients' exercise of the rights granted herein.
You are not responsible for enforcing compliance by third parties with
this License.
11. If, as a consequence of a court judgment or allegation of patent
infringement or for any other reason (not limited to patent issues),
conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot
distribute so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you
may not distribute the Library at all. For example, if a patent
license would not permit royalty-free redistribution of the Library by
all those who receive copies directly or indirectly through you, then
the only way you could satisfy both it and this License would be to
refrain entirely from distribution of the Library.
If any portion of this section is held invalid or unenforceable under any
particular circumstance, the balance of the section is intended to apply,
and the section as a whole is intended to apply in other circumstances.
It is not the purpose of this section to induce you to infringe any
patents or other property right claims or to contest validity of any
such claims; this section has the sole purpose of protecting the
integrity of the free software distribution system which is
implemented by public license practices. Many people have made
generous contributions to the wide range of software distributed
through that system in reliance on consistent application of that
system; it is up to the author/donor to decide if he or she is willing
to distribute software through any other system and a licensee cannot
impose that choice.
This section is intended to make thoroughly clear what is believed to
be a consequence of the rest of this License.
12. If the distribution and/or use of the Library is restricted in
certain countries either by patents or by copyrighted interfaces, the
original copyright holder who places the Library under this License may add
an explicit geographical distribution limitation excluding those countries,
so that distribution is permitted only in or among countries not thus
excluded. In such case, this License incorporates the limitation as if
written in the body of this License.
13. The Free Software Foundation may publish revised and/or new
versions of the Lesser General Public License from time to time.
Such new versions will be similar in spirit to the present version,
but may differ in detail to address new problems or concerns.
Each version is given a distinguishing version number. If the Library
specifies a version number of this License which applies to it and
"any later version", you have the option of following the terms and
conditions either of that version or of any later version published by
the Free Software Foundation. If the Library does not specify a
license version number, you may choose any version ever published by
the Free Software Foundation.
14. If you wish to incorporate parts of the Library into other free
programs whose distribution conditions are incompatible with these,
write to the author to ask for permission. For software which is
copyrighted by the Free Software Foundation, write to the Free
Software Foundation; we sometimes make exceptions for this. Our
decision will be guided by the two goals of preserving the free status
of all derivatives of our free software and of promoting the sharing
and reuse of software generally.
NO WARRANTY
15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO
WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW.
EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR
OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE
LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME
THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY
AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU
FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE
LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING
RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A
FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF
SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Libraries
If you develop a new library, and you want it to be of the greatest
possible use to the public, we recommend making it free software that
everyone can redistribute and change. You can do so by permitting
redistribution under these terms (or, alternatively, under the terms of the
ordinary General Public License).
To apply these terms, attach the following notices to the library. It is
safest to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least the
"copyright" line and a pointer to where the full notice is found.
<one line to give the library's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
Also add information on how to contact you by electronic and paper mail.
You should also get your employer (if you work as a programmer) or your
school, if any, to sign a "copyright disclaimer" for the library, if
necessary. Here is a sample; alter the names:
Yoyodyne, Inc., hereby disclaims all copyright interest in the
library `Frob' (a library for tweaking knobs) written by James Random Hacker.
<signature of Ty Coon>, 1 April 1990
Ty Coon, President of Vice
That's all there is to it!

## Lua License

Lua License
-----------
Lua is licensed under the terms of the MIT license reproduced below.
This means that Lua is free software and can be used for both academic
and commercial purposes at absolutely no cost.
For details and rationale, see http://www.lua.org/license.html .
===============================================================================
Copyright (C) 1994-2008 Lua.org, PUC-Rio.
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
===============================================================================
(end of COPYRIGHT)

## LuaFileSystem License

LuaFileSystem - File System Library for Lua
Copyright 2003-2007 PUC-Rio
http://www.keplerproject.org/luafilesystem
LuaFileSystem is a Lua library developed to complement the set of functions
related to file systems offered by the standard Lua distribution. LuaFileSystem
offers a portable way to access the underlying directory structure and file
attributes. LuaFileSystem is free software and uses the same license as Lua 5.1
Current version is 1.2.1.

## xdg-utils License

Copyright 2006, Kevin Krammer <kevin.krammer@gmx.at>
Copyright 2006, Jeremy White <jwhite@codeweavers.com>
LICENSE:
Permission is hereby granted, free of charge, to any person obtaining a
copy of this software and associated documentation files (the "Software"),
to deal in the Software without restriction, including without limitation
the rights to use, copy, modify, merge, publish, distribute, sublicense,
and/or sell copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included
in all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
OTHER DEALINGS IN THE SOFTWARE.