Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: x86_64
Installed-Size: 61440
Filename: ahcpd_0.53-r3_x86_64.ipk
Size: 23309
SHA256sum: 1463f90fec7e9df2ef9096b4f4d8439da42c9537a8153125586e937a62a27649
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 81920
Filename: alfred_2024.3-r1_x86_64.ipk
Size: 27294
SHA256sum: da8b684e290bec73f6a5416d370b3509b0731459e80773c3ca709871820aa9f6
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: x86_64
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_x86_64.ipk
Size: 4599
SHA256sum: 25fa8389b73299cf407aaa09ac3b7a50870f196a85b6338562813f668c40167c
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: x86_64
Installed-Size: 153600
Filename: babeld_1.13.1-r2_x86_64.ipk
Size: 68874
SHA256sum: cf35a3d2b489752b3c015163fdcc49c883678027ba9445e9b13d516c36c66800
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 122880
Filename: batctl-default_2024.3-r1_x86_64.ipk
Size: 47638
SHA256sum: ec40427ce7ba4b46a86324edb32086da8000a35a86940a9bd9951f8258b275f9
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 133120
Filename: batctl-full_2024.3-r1_x86_64.ipk
Size: 54970
SHA256sum: 16ee3a565fa4165554e035b0ea43cfb7df9ff7bb04ddbb8a766fcd45eed15960
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 51200
Filename: batctl-tiny_2024.3-r1_x86_64.ipk
Size: 16672
SHA256sum: 270547a9045e1bd0be25561bd767ce937f85cf5f71f42c6387e22959762d036b
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 112640
Filename: batmand_1440-r1_x86_64.ipk
Size: 44806
SHA256sum: 5ad8824e2f8aa0b2c65819cb653e4709d38a18f489999d39d865e2e2f332f40b
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: x86_64
Installed-Size: 1024000
Filename: bird2_2.15.1-r1_x86_64.ipk
Size: 395872
SHA256sum: 101ca49604ad81fdb6fd99f1a9b7ceacbf8de83eadf4e2831c56ce2bae2ee559
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: x86_64
Installed-Size: 40960
Filename: bird2c_2.15.1-r1_x86_64.ipk
Size: 10631
SHA256sum: 519cedc3b1cee49d573cca3410b385654600a81c0a17ef0420cb4e720499a183
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: x86_64
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_x86_64.ipk
Size: 9238
SHA256sum: ba108dbbbf6b6d5fc6f1f7ceb465bea3fe5b69c994761aa6ab56dfab8d04efbc
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024061001-r1_x86_64.ipk
Size: 4784
SHA256sum: 5f4522f8487dc2365f7798ef95ece69c0697a5bbc2b9dd3e352cf19626008215
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 30720
Filename: bmx7-json_r2024061001-r1_x86_64.ipk
Size: 8507
SHA256sum: bac3695d4c0de694e6efacc3fcc92faed34e942ca8313a7ae42bea4ec220747c
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 20480
Filename: bmx7-sms_r2024061001-r1_x86_64.ipk
Size: 6036
SHA256sum: 1e020c8d0d16d3e0af5e4edfb6179bb305cbf157ee0d42078f6bcc4fc54746e4
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 30720
Filename: bmx7-table_r2024061001-r1_x86_64.ipk
Size: 10197
SHA256sum: 9c70af1fc0ada78296169339f1d9b1d108e4246484bf7e5841a9a24dd4069c73
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 20480
Filename: bmx7-topology_r2024061001-r1_x86_64.ipk
Size: 5533
SHA256sum: d72b6dc2b7b0528abb3c78391a1217f668fcdd5954012f723b9d1ced5b977002
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 71680
Filename: bmx7-tun_r2024061001-r1_x86_64.ipk
Size: 26268
SHA256sum: dea7ed3a087ec356a1ba90604e6a925441cedcffd0335a890fa3b2f7ef50261a
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 40960
Filename: bmx7-uci-config_r2024061001-r1_x86_64.ipk
Size: 9293
SHA256sum: 6b4a01517a1cf7528866a76b7ad788adda919f1643c845a6c73d1c8b537565b5
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: x86_64
Installed-Size: 358400
Filename: bmx7_r2024061001-r1_x86_64.ipk
Size: 169844
SHA256sum: 938d8e0f053eb8633315922728dd2244a892350b1d0311fe5026ab51e444e4c8
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: x86_64
Installed-Size: 706560
Filename: cjdns-tests_21.1-r6_x86_64.ipk
Size: 330165
SHA256sum: 3d8a2ee8dd41ee1853cd2be9f0476ce444d75370757efb297dc36aa4b7a63a7d
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: x86_64
Installed-Size: 849920
Filename: cjdns_21.1-r6_x86_64.ipk
Size: 384379
SHA256sum: e826fd944e591f46ccd5d3735d44c474df57e13b621b184514c8b7e8b44e0f38
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_x86_64.ipk
Size: 1423
SHA256sum: 6ef75729bc8f6f82eb9a215eb44f82283a114643f7bde72d795bd8198bb2f934
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_x86_64.ipk
Size: 951
SHA256sum: 6fe5678cba5100c2925720a285719a8d66a121f98bbe58ffead2376c0ac4bf72
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_x86_64.ipk
Size: 938
SHA256sum: 953d20dbc86175892364f3553b9ca30d209d42e31386c97c21e5103eb0b7c8f6
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 235520
Filename: hnetd-nossl_2018.12.21~c4376661-r1_x86_64.ipk
Size: 103643
SHA256sum: 657f5e04e65467ccb343387b5fb5fb4737ba13775c1dc573f975c670fd7ade85
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: x86_64
Installed-Size: 256000
Filename: hnetd-openssl_2018.12.21~c4376661-r1_x86_64.ipk
Size: 114575
SHA256sum: 69bc7b92cb19ae7fd35d475fb311ebc74103317904c360b849f0e787ecda2575
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: x86_64
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_x86_64.ipk
Size: 6582
SHA256sum: fa743543c231bc7d2a8187d1a3c5142bffd147de2cd82c72df25b7d0dcb05f93
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: x86_64
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_x86_64.ipk
Size: 57618
SHA256sum: d2b94957aff1b4bb9c0de617bd6756a84215836508fae9e7b5cfb20941d916eb
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7783
SHA256sum: 45396eec128b51dbf2cce4ef4e75c5ca52ad48081beccca89d280646078a875d
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: ce5ac802cf56ecb81de77106fb70632fcfffa643368293ac7286b1f2283de60e
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: x86_64
Installed-Size: 30720
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_x86_64.ipk
Size: 7449
SHA256sum: df0c1395c9ff5cdade50b36f91eb4313f475869d7b604f63b448526fe6f31204
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2852
SHA256sum: 3aa1a6b591ce1d7e6d68ae27918c99930a85b70044e59c333cd610f4ce5edc2e
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: x86_64
Installed-Size: 92160
Filename: ndppd_0.2.5-r2_x86_64.ipk
Size: 34355
SHA256sum: 565693434a339dae94ece89462b71493de54792c2e7924713b1f57204ee75c30
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: x86_64
Installed-Size: 143360
Filename: nodogsplash_5.0.2-r1_x86_64.ipk
Size: 48392
SHA256sum: 2592daad62f0f011af1d346bc84197d4689868407f56b2d1f53613b789b4d85f
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: x86_64
Installed-Size: 40960
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_x86_64.ipk
Size: 11973
SHA256sum: 7db1768b961dc7c9913e91cfa6d910d38ca92a4223c8e3f77624dd2fe0dffcf7
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 2780
SHA256sum: d9f7d8aac64cc8637c4a7ef6262cd73b422ef2f098c9b0f92d35d7a7c13c8e6d
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 12987
SHA256sum: d9c2ec6db067385c98b91ed80a3bc7ff8aaa2a3ba74a701a0de938573549ddbd
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 4487
SHA256sum: 55eda100cca0c2af1d1d86435cac0d5ed168bca7f7249b63eae11f890eeec1a3
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 3088
SHA256sum: 4943d3093c6799b6f62c8fdf76b52c46a047eb1dd6dfbd3d22cacea220b40df1
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 4845
SHA256sum: 86df509963d113b206eb60a4c054e6c599224cc00045e64ceff9b61b0543d56c
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 3321
SHA256sum: ade8fa1488b8275a53810a648fa07982ceda4f25dec904e82c5546e480007f76
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 31436
SHA256sum: 81b384e208e6b4531c466b251056f8cce5ba7a9c9f309a19d8a5f221f6daaa34
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 23244
SHA256sum: 72fcd69e25b6a44dc510faebe8857b818be9cb5b1492ec67fd2461b65c34f87b
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 9957
SHA256sum: 7714e4c59a74248562d045be962d285c00b1a677aac95338cbe123dbd17deb3d
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 11702
SHA256sum: 8fdd872f66dd9b96e3b000222a91473a7800f3c554c4a8a05660c34085c6e957
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 13896
SHA256sum: 2a1e2239b7d4eb5319035d40e8bd4f5cbf97c34b56ef2561ae85a585b57dbbf0
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 30720
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 9426
SHA256sum: ce642d16eaa90a0dfcd2f1d02a6c1efdab1dcadcf57d40b974e855918fed932f
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 3707
SHA256sum: 5b6b2a6e58849fcdd4078f8b9d07961fb7879c844b141fe8e1180bd1ce6ce34b
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 194560
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 62553
SHA256sum: f4e8fbebd97ef8e6df6e247eb27de617f56028c8dddacd68e5a561c451f558d2
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 30720
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 7114
SHA256sum: 6f4e480452e1a5b68da5897183f3e785d6cfdfb104667ff059b2f01ca4532be4
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 10725
SHA256sum: 1ba2a25346b9dd2b40c1ee9dcbcc540f98ef9edc837e92db233a47e42464e893
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 5338
SHA256sum: 558da7bf9373f55f9aaff97fd7f62fe4d714b49850a6ce317b7261f4906b8e9b
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 15296
SHA256sum: 933a8a07c93a40d2bd7841d87e590e9c6756f88f4dd63d265cb5975d037b8c01
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 20480
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 2431
SHA256sum: 47681a6909d470ab502b9be3e022cc5aafbbb06c5a63eb390cc7b105b7eb4b10
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 1948
SHA256sum: 8624f42e3d612664c59dcd99842ebec55b50a82752fb4e1a712ec2e9d1bc6242
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 327680
Filename: olsrd_2024.06.09~d72be9ad-r1_x86_64.ipk
Size: 139732
SHA256sum: f0ca90dc4897fe8d09116eb821bc90d7e49deab3bdb147dda6f046b2d5f2aad6
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 450560
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_x86_64.ipk
Size: 183078
SHA256sum: 548b53c1fa3a5efc0e49c105ffebb8f2b82161767da60024f775303fb069a6f7
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 440320
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_x86_64.ipk
Size: 177591
SHA256sum: da200e6c03734ef5b7bc2fbb14bf8412f8e6b40bed1c893715a1c06a0c3b9134
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_x86_64.ipk
Size: 2299
SHA256sum: 21c6f96c859055114eb891102701a23509dd2d63a2dac3882d890b71ab1d4e3a
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: x86_64
Installed-Size: 645120
Filename: oonf-olsrd2_2022.08.25~1cec9b21_x86_64.ipk
Size: 259842
SHA256sum: 7db16110bb83939d281fea0f700dc35bf3b87b7b4e839f442ed337a6f9118a85
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: x86_64
Installed-Size: 573440
Filename: opennds_10.3.0-r1_x86_64.ipk
Size: 162036
SHA256sum: 596cb77c6f166edddd7a5b656f5920a0d0d92fcdf02db59092ae3db2945ea6b2
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: x86_64
Installed-Size: 204800
Filename: pimbd_2018.06.19~dbf4e591-r4_x86_64.ipk
Size: 88678
SHA256sum: 61321ee56500d8e414124a7cefde0ca54ba23269ba71b3486c6c1011d6a53f6e
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: x86_64
Installed-Size: 112640
Filename: prince_0.4-r3_x86_64.ipk
Size: 31309
SHA256sum: dda9e27968e37486de7d95b713c02cd381dc3c3c7abcb1debfa75bef42df392d
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: x86_64
Installed-Size: 40960
Filename: vis_2013.04.07~7710cce4-r9_x86_64.ipk
Size: 11660
SHA256sum: 0bcd3bd841fc5db1601358683dcee66fdde312be0c07ed10990bdf59e2852255
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: x86_64
Installed-Size: 30720
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_x86_64.ipk
Size: 9714
SHA256sum: 2d7661e7c0e024e7d9fd4a780fb2e286dd768967ecc749193b70e903d9a4c15a
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.