Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: mips_mips32
Installed-Size: 81920
Filename: ahcpd_0.53-r3_mips_mips32.ipk
Size: 23369
SHA256sum: 0c7de955ed43421a55f36f9538c3e91b458f41c27a592f1f486d1077aa2b9847
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: alfred_2024.3-r1_mips_mips32.ipk
Size: 27660
SHA256sum: 45df6e0a0944bbaaa3b925cc2453a2e818bf8179e3c6412372a1cb97103428a9
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: mips_mips32
Installed-Size: 71680
Filename: babel-pinger_0.1-r1_mips_mips32.ipk
Size: 4648
SHA256sum: f67096d565e4c819ec70a695425507d8dad6264584ec79b50a6723a736d2109a
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: mips_mips32
Installed-Size: 153600
Filename: babeld_1.13.1-r2_mips_mips32.ipk
Size: 63811
SHA256sum: 6320141db5f7b674e2c024113e46c5615addee64294858dacdf61e40dacd3c59
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: batctl-default_2024.3-r1_mips_mips32.ipk
Size: 42459
SHA256sum: a4f66c67ed9a0136cb49e64d692f9610e5e0936030e15b5ea32d0eeadc53b191
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: batctl-full_2024.3-r1_mips_mips32.ipk
Size: 50025
SHA256sum: d42236efadce07492dd0ab2e9f9acdfa5fd34b28e23c759a2476f34b95e7e0f7
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: batctl-tiny_2024.3-r1_mips_mips32.ipk
Size: 14488
SHA256sum: 126d79d5e49d5469abcd0b025ad894195a0cd1c5f50fb156570b7ad2b29e9e33
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: batmand_1440-r1_mips_mips32.ipk
Size: 39867
SHA256sum: d1c7a1f9f3aa7ffff5e394137a7ea07c78fcf3a7e8826b0a41ac8316cf5e0f75
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 1075200
Filename: bird2_2.15.1-r1_mips_mips32.ipk
Size: 397569
SHA256sum: e72c3bfa0d0945d3b2e82674f6de50a0f2c8d8839f2b47577ab66e01997147bf
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 71680
Filename: bird2c_2.15.1-r1_mips_mips32.ipk
Size: 10552
SHA256sum: 79754fd48412fd50e4632933371cf005f1aca41d78a1c2e14a5ac194764c8b0f
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: mips_mips32
Installed-Size: 71680
Filename: bird2cl_2.15.1-r1_mips_mips32.ipk
Size: 9217
SHA256sum: 452c6887aaf187a8085dd3dcff6d570ee0489ab2c6d8c28c1ce333b60c47443d
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-iwinfo_r2024061001-r1_mips_mips32.ipk
Size: 4683
SHA256sum: 1b855db42005b6856dcd45612ac92faebfeb3a640df1d4cab807d1698a9600a7
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-json_r2024061001-r1_mips_mips32.ipk
Size: 8631
SHA256sum: f8d0f39bcb046e5fc56a603571615a684f93c6ee0f9c6d8265ba9a8b30e114d8
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-sms_r2024061001-r1_mips_mips32.ipk
Size: 6140
SHA256sum: 9a065846b802993fec5c853ee593cc40b5d9b977e394aa973df811ca9ba103f4
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-table_r2024061001-r1_mips_mips32.ipk
Size: 10141
SHA256sum: 144332e3ae9d11b7adf70cd95b17a37c5f24d1478fda4577f99451188a6276fc
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 71680
Filename: bmx7-topology_r2024061001-r1_mips_mips32.ipk
Size: 5673
SHA256sum: 02716f00c654d4216fe19657d132ee8036997a796491199f1852b7e3b51beca7
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 81920
Filename: bmx7-tun_r2024061001-r1_mips_mips32.ipk
Size: 25885
SHA256sum: ade3723f308fd393fe6614fe658e614075b683973d4732c525582e5300b95294
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 81920
Filename: bmx7-uci-config_r2024061001-r1_mips_mips32.ipk
Size: 8819
SHA256sum: 77a620f5458d850bfeccb05b72c7ae000b806dd10a749b584add201593e9dd16
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: mips_mips32
Installed-Size: 419840
Filename: bmx7_r2024061001-r1_mips_mips32.ipk
Size: 176525
SHA256sum: fcc0745d05b5ad4611321474fb42c81b94afc102e0adef45af7b46b59c17748d
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips_mips32
Installed-Size: 901120
Filename: cjdns-tests_21.1-r6_mips_mips32.ipk
Size: 376591
SHA256sum: 2ad05f10848771d7fcf6c00ffa9b8a33538db7db30620a555fd33b01a6093ee1
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: mips_mips32
Installed-Size: 1064960
Filename: cjdns_21.1-r6_mips_mips32.ipk
Size: 455673
SHA256sum: 7a5bf4c05c5c921b6ee406fbf6db8b11c1549ddc7cf0c01f8d39c26535270822
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 1421
SHA256sum: c6e591bcb6c60b8e96a65d9270faec076e31f8e616565659bf8a08650622810b
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 952
SHA256sum: eefc299d0f9ab9e0626f54a1f9b64f9d8b4614da4bd6387a7139efba1c38259b
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 942
SHA256sum: 974d3137416bcae8f22bf71fd1a3c5efa061cf76605bab0d3ad28e803d420259
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 235520
Filename: hnetd-nossl_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 95742
SHA256sum: 712cf68a9245f5428a78a967e554378d8cc1fb8b214f5d02c7569b1eb8e836e0
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: mips_mips32
Installed-Size: 296960
Filename: hnetd-openssl_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 106039
SHA256sum: da694e86ad642b6fb2943e9e94b45ef19922a0ebf37e4b0a77c609e954bfdbc8
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: mips_mips32
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_mips_mips32.ipk
Size: 6583
SHA256sum: abf9b5de41187cf7b7a27500af38b99b174d6710418d0f0e51395eb778e99431
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: mips_mips32
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_mips_mips32.ipk
Size: 57616
SHA256sum: 59baf692545009ff2d37ac5d0d9a4c563ba6c58f77e7dac22aa2d169d703475b
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7783
SHA256sum: 45396eec128b51dbf2cce4ef4e75c5ca52ad48081beccca89d280646078a875d
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: ce5ac802cf56ecb81de77106fb70632fcfffa643368293ac7286b1f2283de60e
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: mips_mips32
Installed-Size: 71680
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mips_mips32.ipk
Size: 7565
SHA256sum: dcfd208debe4ddb8a385d1999345fd660c2ad5b4f776a61c968e7a058b581455
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2852
SHA256sum: 3aa1a6b591ce1d7e6d68ae27918c99930a85b70044e59c333cd610f4ce5edc2e
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: mips_mips32
Installed-Size: 143360
Filename: ndppd_0.2.5-r2_mips_mips32.ipk
Size: 32035
SHA256sum: f572374fb9f0f22a9e36b25465b2deaed6d5386da40901df94b9d411216e8630
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: mips_mips32
Installed-Size: 235520
Filename: nodogsplash_5.0.2-r1_mips_mips32.ipk
Size: 46121
SHA256sum: fc3a725dde52c3ea01335fafea4c357881ffafb6527427a54b0f32e594026067
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips_mips32
Installed-Size: 81920
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mips_mips32.ipk
Size: 11824
SHA256sum: 1840c645b46f1fb9523a36448a0b9a0748717cf72b37b061bb339c37a4870bd2
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 2709
SHA256sum: b98a00895413a568b77fd5dec5ec06d5ae4b47fe9dae87715996ac32a47bccd7
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 12790
SHA256sum: 292fb292c9e99e3f096c84b2e1f6dc18396a453b284c5156f5ad78b22bdc919e
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 4436
SHA256sum: 725d559d11f879a80559e3db4fcfdb3c5bed914128417aebc56da232cf86c525
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 3061
SHA256sum: c828527d959ffe1d5dc3fcebcb998501101019541f549a2b89d85b9e4fedb18d
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 4835
SHA256sum: be925515b2762b12ca4fc6c96ff578627b2db5982af03de00862d4345086189a
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 3233
SHA256sum: ec2a6a562ddcdec3bcfb75b9848f5c4b571782a32c65bb0e3e567c2690543d57
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 143360
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 31777
SHA256sum: e101040f46570337703c9834b41fc0e9f756351f36f78bb471fc53c3b476d512
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 23720
SHA256sum: db02c9b31ecc33c3d5587a453c84391d3cd63dc1ef2ffe4335784d35390ae875
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 9492
SHA256sum: 624d5c386516778d57f555f1edaa7952aa5cf049f4ce84d3f8e93e73b92e8680
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 11985
SHA256sum: 3e35aa847ae35f9f7d85e9e3be0c79c95a84332b618d1fbaa7dd74c4aea67cc1
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 13797
SHA256sum: dc81429e35f5384beeb6def98c3df6bb25ed06a4d368c94b3cdfafea1398e173
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 9212
SHA256sum: ba3bf5cd8529a1e2eccee96a44670f81665126d477c0d79e13f148b5b6d287b0
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 3597
SHA256sum: 21be4e95524aab3085b833e60b695ca3c8c63667b49baedffd3ef7b1bda2016d
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 256000
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 63025
SHA256sum: 25357149a6b0141f586d8dead16b485ffe661dcabb91273c0799f91cb87cb597
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 6970
SHA256sum: 2c1ca78e84ff475938852b2584bbc5b5b357fd5b8b1ef3aae4ae7e3425d4bf37
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 11002
SHA256sum: b9db494db582b4c86a6ae16483fb6ac1f5009ac65b3b30b2f2534966fbfbfd2f
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 5171
SHA256sum: 706e9cbd067c2975058a8615ab5562faf3fcd38f1ed2f0ffe3a46a390e0a801e
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 71680
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 15556
SHA256sum: 3fcdad057b5b595c27e8af28df48e75582121026a883ba7844325c03d19259c5
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 81920
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 2395
SHA256sum: 2b8dac5278492cc5e6845b833a4627072e973a21e3d6719217c1b95bfa04361b
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 1951
SHA256sum: b55a77aa329eec20deb04a89eb200c52549275e5b4ae6b84596408d288f8209c
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 368640
Filename: olsrd_2024.06.09~d72be9ad-r1_mips_mips32.ipk
Size: 139308
SHA256sum: 2ce76d27ef0e2f666b5109ad67042c3b7ea7e09322f0ee55933501785a8d9f7f
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 430080
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mips_mips32.ipk
Size: 159688
SHA256sum: 4710d512acf3f0820397ba6b768d4dc8ce0fb2ecd5578fb3924bdfb2769705b8
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 430080
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mips_mips32.ipk
Size: 156115
SHA256sum: 3b0aeb7996462ceb860c24dca46fa57e26811af7321c563ed92308562311d4b7
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_mips_mips32.ipk
Size: 2294
SHA256sum: e37c44186336f7733873a2cb193a37af9fb432efe675a5e2c025eb2bc67fb78b
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: mips_mips32
Installed-Size: 634880
Filename: oonf-olsrd2_2022.08.25~1cec9b21_mips_mips32.ipk
Size: 232675
SHA256sum: 051facdbacf8f009923f33d9427eb1637af77d74b844e5450a462077e8c3b3ec
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: mips_mips32
Installed-Size: 634880
Filename: opennds_10.3.0-r1_mips_mips32.ipk
Size: 159134
SHA256sum: 68a785147ec643669c02f93c768b401344608e6a34bb60584cae5a0542392036
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: mips_mips32
Installed-Size: 225280
Filename: pimbd_2018.06.19~dbf4e591-r4_mips_mips32.ipk
Size: 79180
SHA256sum: 013eea8154ade087eb43d7adc382f292a64be041f4c4f08b325650ff8ca847f0
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: mips_mips32
Installed-Size: 215040
Filename: prince_0.4-r3_mips_mips32.ipk
Size: 33799
SHA256sum: cd319499ac8848805a1f4ddcc66ae78854a8ee40dbf593c7ef03f75f2f5114e2
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: mips_mips32
Installed-Size: 81920
Filename: vis_2013.04.07~7710cce4-r9_mips_mips32.ipk
Size: 11149
SHA256sum: ea69823bff3465af2b302fa4c32bcda95e0df7c63bce78e7d0e01501833b91a5
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: mips_mips32
Installed-Size: 71680
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mips_mips32.ipk
Size: 9479
SHA256sum: fa2a10f300251785e9b26cd3567714153e3fd5173684e2bc02bcb06047b79e87
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.