Package: ahcpd Version: 0.53-r3 Depends: libc, ip, librt License: MIT Section: net URL: https://www.irif.fr/~jch/software/ahcp/ Architecture: mips_4kec Installed-Size: 81920 Filename: ahcpd_0.53-r3_mips_4kec.ipk Size: 20173 SHA256sum: 56fd80528e892a6376b9aa5b2cf14f94de13d2ab9dcc615b0b0e60f460261e7b Description: Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc Configuration Protocol (AHCP). AHCP is designed for wireless mesh networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may also be used on wired networks. Package: alfred Version: 2024.3-r1 Depends: libc, libnl-tiny1, librt License: GPL-2.0-only MIT Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: alfred_2024.3-r1_mips_4kec.ipk Size: 24709 SHA256sum: 8e134d7575fdf696fa5df977454b27c0f2bc46c108c7634e6f1724bea10da8b0 Description: alfred is a user space daemon for distributing arbitrary local information over the mesh/network in a decentralized fashion. This data can be anything which appears to be useful - originally designed to replace the batman-adv visualization (vis), you may distribute hostnames, phone books, administration information, DNS information, the local weather forecast ... alfred runs as daemon in the background of the system. A user may insert information by using the alfred binary on the command line, or use special programs to communicate with alfred (done via unix sockets). alfred then takes care of distributing the local information to other alfred servers on other nodes. This is done via IPv6 link-local multicast, and does not require any configuration. A user can request data from alfred, and will receive the information available from all alfred servers in the network. Package: babel-pinger Version: 0.1-r1 Depends: libc, librt Section: net URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/ Architecture: mips_4kec Installed-Size: 71680 Filename: babel-pinger_0.1-r1_mips_4kec.ipk Size: 4241 SHA256sum: 0f0ec2cb18ce0fb427a69ff4a5e52234cbd79ed297337bbd6696956b3ae825da Description: Babel-pinger is a hack to export a default route into Babel for people using DHCP to configure their routers rather than speaking to their upstream provider with a proper routing protocol. Package: babeld Version: 1.13.1-r2 Depends: libc, libubus20241020, libubox20240329 License: MIT Section: net URL: https://www.irif.fr/~jch/software/babel/ Architecture: mips_4kec Installed-Size: 153600 Filename: babeld_1.13.1-r2_mips_4kec.ipk Size: 55134 SHA256sum: 66b8345eaff328202bda52791f0721a83d3607bbe8e6614329c741325b1dd53b Description: Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4 with fast convergence properties. It is based on the ideas in DSDV, AODV and Cisco's EIGRP, but is designed to work well not only in wired networks but also in wireless mesh networks, and has been extended with support for overlay networks. Babel is an IETF standard protocol (RFC 8966). Package: batctl-default Version: 2024.3-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: batctl-default_2024.3-r1_mips_4kec.ipk Size: 38252 SHA256sum: 30a7c7ca5f57cb670ddd1f3760893c1b97e9e5290e4b32ef22b452b9ad97ad59 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.3 of the user space utility. Standard subcommands for configuration and online debugging are enabled. Package: batctl-full Version: 2024.3-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: batctl-full_2024.3-r1_mips_4kec.ipk Size: 44600 SHA256sum: 5d8937c7bc19bfa25d417432973c32e6ad92a8d4afbca23c92ca43ddcce7dd11 Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.3 of the user space utility. Subcommands for configuration, online and offline debugging are enabled. Package: batctl-tiny Version: 2024.3-r1 Depends: libc, libnl-tiny1, librt Provides: batctl Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny License: GPL-2.0-only ISC MIT Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: batctl-tiny_2024.3-r1_mips_4kec.ipk Size: 12884 SHA256sum: 1f50d81c772ad2db757b98e83f9a22d5f6d4e86054de8ffc4ed174b2cf3619ba Description: batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced. It is an easier method for configuring batman-adv and provides some additional tools for debugging as well. This package builds version 2024.3 of the user space utility. Only configuration relevant subcommands are enabled. Package: batmand Version: 1440-r1 Depends: libc, libpthread, kmod-tun License: GPL-2.0 Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: batmand_1440-r1_mips_4kec.ipk Size: 35942 SHA256sum: 70bb1658e2130ba4bc4cbf434da177c1351595b682d48fddb569a6b63742dc0c Description: B.A.T.M.A.N. layer 3 routing daemon Package: bird2 Version: 2.15.1-r1 Depends: libc, libpthread Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: mips_4kec Installed-Size: 870400 Filename: bird2_2.15.1-r1_mips_4kec.ipk Size: 353449 SHA256sum: a081a5267ba4c0e9b20e85493cc9fd7b7d37c1d040b8b70c8620c9165ba4e4a1 Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and OSPFv3, RIPng, Babel and BGP protocols for IPv6. In BGP, BIRD supports communities, multiprotocol extensions, MD5 authentication, 32bit AS numbers and could act as a route server or a route reflector. BIRD also supports multiple RIBs, multiple kernel routing tables and redistribution between the protocols with a powerful configuration syntax. This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6 into a single branch, and also adds support for the Babel routing protocol. Package: bird2c Version: 2.15.1-r1 Depends: libc, bird2, libreadline8, libncurses6 Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: mips_4kec Installed-Size: 71680 Filename: bird2c_2.15.1-r1_mips_4kec.ipk Size: 9780 SHA256sum: 49eaff9dd975da846ed44711a5588215267120da3a5b51e4c01834730bf8bc2b Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Unless you can't afford dependency on ncurses and readline, you should install BIRD command-line client together with BIRD. Package: bird2cl Version: 2.15.1-r1 Depends: libc, bird2 Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6 License: GPL-2.0-or-later Section: net URL: http://bird.network.cz/ Architecture: mips_4kec Installed-Size: 71680 Filename: bird2cl_2.15.1-r1_mips_4kec.ipk Size: 8580 SHA256sum: 5e5059258d567b8f451180a1af51cf53832b3299f30d2f3ceed350834179561a Description: BIRD is an internet routing daemon which manages TCP/IP routing tables with support of modern routing protocols, easy to use configuration interface and powerful route filtering language. It is lightweight and efficient and therefore appropriate for small embedded routers. This is a BIRD lightweight command-line client. It is used to send commands to BIRD, commands can perform simple actions such as enabling/disabling of protocols, telling BIRD to show various information, telling it to show a routing table filtered by a filter, or asking BIRD to reconfigure. Package: bmx7-iwinfo Version: r2024061001-r1 Depends: libc, bmx7, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-iwinfo_r2024061001-r1_mips_4kec.ipk Size: 4641 SHA256sum: 7f425cbd978cc73a7eab6a3eb08ca54add8428db94a42fc55f2eec09766b3677 Description: link characteristics plugin via libiwinfo (recommended!) Package: bmx7-json Version: r2024061001-r1 Depends: libc, bmx7, libjson-c5 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-json_r2024061001-r1_mips_4kec.ipk Size: 8079 SHA256sum: 1d1eefa394ed60e7fda70201c94b1bd67c1a011465638ffe488a3764ed309e16 Description: json plugin based on json-c Package: bmx7-sms Version: r2024061001-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-sms_r2024061001-r1_mips_4kec.ipk Size: 5926 SHA256sum: f388ca59d1a8248bb062a65c667375548e2592c89f44ae934eb6d40ba048973a Description: sms plugin Package: bmx7-table Version: r2024061001-r1 Depends: libc, bmx7, bmx7-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-table_r2024061001-r1_mips_4kec.ipk Size: 9546 SHA256sum: 8e8fdcf5b08ad84f734dae10cbd687f56215357904b1fdbf6c94a33347598e49 Description: plugin to announce routes from tables via tunnels Package: bmx7-topology Version: r2024061001-r1 Depends: libc, bmx7 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 71680 Filename: bmx7-topology_r2024061001-r1_mips_4kec.ipk Size: 5624 SHA256sum: a901df2d30c12cc4fcfe906eb7a7e2027beb0867b45fcf61b9053fe5ff49f42b Description: topology plugin Package: bmx7-tun Version: r2024061001-r1 Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 81920 Filename: bmx7-tun_r2024061001-r1_mips_4kec.ipk Size: 24678 SHA256sum: 5008844e2afce94e66b7757c8ba9f4038c4a1e635009323273afbdfadd3b4ffa Description: ipip-based tunnel plugin (recommended!) Package: bmx7-uci-config Version: r2024061001-r1 Depends: libc, bmx7, libuci20130104 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 81920 Filename: bmx7-uci-config_r2024061001-r1_mips_4kec.ipk Size: 8352 SHA256sum: f13876a70b9361cb6e5270fb5b691434724730ddf90b09fb2c546066216ab77c Description: configuration plugin based on uci (recommended!) Package: bmx7 Version: r2024061001-r1 Depends: libc, zlib, libmbedtls21, libiwinfo20230701 License: GPL-2.0-or-later Section: net URL: https://github.com/bmx-routing/bmx7 Architecture: mips_4kec Installed-Size: 358400 Filename: bmx7_r2024061001-r1_mips_4kec.ipk Size: 156485 SHA256sum: 1308926dc416717a7d930ccab7425a19325fd8ef8f44b5b2788b145ac13e48df Description: BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing Package: cjdns-tests Version: 21.1-r6 Depends: libc, libpthread, librt License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: mips_4kec Installed-Size: 696320 Filename: cjdns-tests_21.1-r6_mips_4kec.ipk Size: 333307 SHA256sum: 5edcedcda23110c1ea1314cf84de4d96ad07b9aecaf3d1b1d4b2b15014d1868f Description: cjdns test cases Package: cjdns Version: 21.1-r6 Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2 License: GPL-3.0-or-later Section: net URL: https://github.com/cjdelisle/cjdns Architecture: mips_4kec Installed-Size: 931840 Filename: cjdns_21.1-r6_mips_4kec.ipk Size: 400472 SHA256sum: 52237e648ec2427eee93faedf8e67a471411bee8393ab5950e7f80b76b7862ed Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: hnet-full-l2tp Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 10240 Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 1421 SHA256sum: 3e4e48bcb59a8ac1c4d29863c7288c0165624f5263e31cdbdc66e9cadd71e0f7 Description: HNCP Homenet metapackage (w/ L2TP) Package: hnet-full-secure Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 10240 Filename: hnet-full-secure_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 956 SHA256sum: f750fc91c4de2da6d4165a2fed8b4f16073030df388ffaa2ea519ed1a66ea53b Description: HNCP Homenet metapackage (w/ SSL) Package: hnet-full Version: 2018.12.21~c4376661-r1 Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 10240 Filename: hnet-full_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 945 SHA256sum: ab7df34cca031a377724c59659906b097139ebdfcabf4d50c730d134fe7d36ed Description: HNCP Homenet metapackage Package: hnetd-nossl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 163840 Filename: hnetd-nossl_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 83660 SHA256sum: 5c681f10fce438f4d969d5757a0d74f4b0ee00f429a91914c8f206b490659dba Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: hnetd-openssl Version: 2018.12.21~c4376661-r1 Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/hnetd Architecture: mips_4kec Installed-Size: 235520 Filename: hnetd-openssl_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 92202 SHA256sum: e3cceb0ffd1e676de116d2fe54f5239b337f4cb09636fc0592562eec535b4fe4 Description: This package provides a daemon which implementats distributed prefix assignment and service discovery for a home network consisting of multiple routers connected to multiple service providers. It provides a netifd protocol "hnet" for use in /etc/config/network. Package: luci-app-cjdns Version: 1.3-r9 Depends: libc, cjdns, luci-compat, luci-base License: GPL-3.0-or-later Section: luci URL: https://github.com/cjdelisle/cjdns Architecture: mips_4kec Installed-Size: 40960 Filename: luci-app-cjdns_1.3-r9_mips_4kec.ipk Size: 6582 SHA256sum: ad32138a55c99a9a6e54b1ec11bfc0a20275b872a492c4f0503608642fa9326c Description: Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks. Package: luci-app-hnet Version: 2018.12.21~c4376661-r1 Depends: libc License: GPL-2.0-only Section: luci Architecture: mips_4kec Installed-Size: 235520 Filename: luci-app-hnet_2018.12.21~c4376661-r1_mips_4kec.ipk Size: 57615 SHA256sum: 2459571850982fa8afcbe88f1051f6bf1c06f149593aa5420d200af5bc7c81e8 Description: HNCP Homenet configuration and visualization Package: luci-app-olsrd2 Version: 0.2.6-r16 Depends: oonf-olsrd2, luci-mod-admin-full, libc Section: luci Architecture: all Installed-Size: 61440 Filename: luci-app-olsrd2_0.2.6-r16_all.ipk Size: 7783 SHA256sum: 45396eec128b51dbf2cce4ef4e75c5ca52ad48081beccca89d280646078a875d Description: OLSR2 configuration and status module Package: mesh11sd Version: 4.1.1-r1 Depends: libc License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/mesh11sd Architecture: all Installed-Size: 122880 Filename: mesh11sd_4.1.1-r1_all.ipk Size: 25669 SHA256sum: ce5ac802cf56ecb81de77106fb70632fcfffa643368293ac7286b1f2283de60e Description: Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks. It was originally designed to leverage 802.11s mesh networking at Captive Portal venues. This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes. It allows all mesh parameters supported by the wireless driver to be set in the uci config file. Settings take effect immediately without having to restart the wireless network. Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted. Default settings give rapid and reliable layer 2 mesh convergence. Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set. Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes. The mesh11sd daemon can dynamically check configured parameters and set them as required. In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled, and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul. Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier. Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates. OWE Transition Mode is enabled by default on mesh gates. This version does not require a Captive Portal to be running. Package: minimalist-pcproxy Version: 2014.12.12~2d6d1b0b-r7 Depends: libc, libubox20240329 License: BSD-3-Clause Section: net URL: https://github.com/fingon/minimalist-pcproxy Architecture: mips_4kec Installed-Size: 71680 Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_mips_4kec.ipk Size: 6566 SHA256sum: 52dd4b7fda25342c7eb14c0175d7ebd5f66a2d9cbf6b55ebc2c1bfff0929c229 Description: This package contains a daemon which can be used to forward PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers. In and of itself, it is not very useful, but combined with hnetd+miniupnpd it allows for control of NAT forwarding and firewall pinholes from multiple hops away. Package: naywatch Version: 1-r7 Depends: libc, owipcalc License: GPL-2.0-only Section: utils Architecture: all Installed-Size: 20480 Filename: naywatch_1-r7_all.ipk Size: 2852 SHA256sum: 3aa1a6b591ce1d7e6d68ae27918c99930a85b70044e59c333cd610f4ce5edc2e Description: Reboots or triggers watchdog if no link-local neighbor is available. Important: Be careful when you do a sysupgrade. Stop naywatch first, and make sure procd took control again of the watchdog. You can do this using 'ubus call system watchdog'. Status should be "running". Package: ndppd Version: 0.2.5-r2 Depends: libc, libstdcpp6 License: GPL-3.0-or-later Section: net URL: http://www.priv.nu/projects/ndppd/ Architecture: mips_4kec Installed-Size: 81920 Filename: ndppd_0.2.5-r2_mips_4kec.ipk Size: 27954 SHA256sum: e8529eee2e017ce72339d235a706abe06a0345b5a6504663735012420144d1db Description: ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery Protocol) messages between interfaces. ndppd currently only supports Neighbor Solicitation Messages and Neighbor Advertisement Messages. The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts are supported. No subnets. ndppd solves this by listening for Neighbor Solicitation messages on an interface, then query the internal interfaces for that target IP before finally sending a Neighbor Advertisement message. Package: nodogsplash Version: 5.0.2-r1 Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra License: GPL-2.0-or-later Section: net URL: https://github.com/nodogsplash/nodogsplash Architecture: mips_4kec Installed-Size: 174080 Filename: nodogsplash_5.0.2-r1_mips_4kec.ipk Size: 43296 SHA256sum: e120bf2c00389958d213287b9df792637f067a3f81817b94b4245056a7f5be5d Description: Nodogsplash is a Captive Portal that offers a simple way to provide restricted access to the Internet by showing a splash page to the user before Internet access is granted. Package: ohybridproxy Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329, mdnsd License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: mips_4kec Installed-Size: 81920 Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_mips_4kec.ipk Size: 10016 SHA256sum: 9a3eb55ca673febc92d8e3da92a81e1618c8562208f5934079d8ed5a6ddced53 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again. Package: olsrd-mod-arprefresh Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 2720 SHA256sum: 21a02b4144e8619ddbb03aba7065aa5257ae87910df55f778715a33786610d70 Description: Kernel ARP cache refresh plugin Package: olsrd-mod-bmf Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd, kmod-tun License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 11674 SHA256sum: d811b0882323a1e90956a8e9667a96c041de036a62ea5392d4477cca43e56186 Description: Basic multicast forwarding plugin Package: olsrd-mod-dot-draw Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 4347 SHA256sum: dfa83df1d9f71e90a3511b1a9892959d9f77c243aac7aa6155e881a724702b7e Description: Dot topology information plugin Package: olsrd-mod-dyn-gw-plain Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 2926 SHA256sum: 434e3fbfab504c881e4f6ba88383e44eb50e21909835bda41d44e9a419bef6dc Description: Dynamic internet gateway plain plugin Package: olsrd-mod-dyn-gw Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 4475 SHA256sum: 6b09bc41bd1246d66282b470477477abd915e5c4e756885d0e5a86e8ff9824d5 Description: Dynamic internet gateway plugin Package: olsrd-mod-filtergw Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 3170 SHA256sum: 7b011c44abaf0081994c30a17c882663442cab1fe259c777094cf891fc77a104 Description: Filter Gateway plugin Package: olsrd-mod-httpinfo Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 143360 Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 31227 SHA256sum: 6e12fac0a53f29a7dd3301e21fbb7c4c33a5ce710f2dd00c0a4d453d60ba157d Description: Small informative web server plugin Package: olsrd-mod-jsoninfo Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 21400 SHA256sum: facb1f9e8beb49bc087fb6f8b788030f6256a110eb7e55553d7f7e53060ae48a Description: Small informative plugin with JSON output Package: olsrd-mod-mdns Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 9006 SHA256sum: 88c114c6e226d02516943e7c01da1d12dd775577053414d5cc29036d8480b47a Description: MDNS/Zeroconf/Bonjour packet distribution Package: olsrd-mod-nameservice Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 10871 SHA256sum: b04c2af9bda876bf15dffd2a32d8f31e71900a099e2a3901afb5e6e0c83121f9 Description: Lightweight hostname resolver plugin Package: olsrd-mod-netjson Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 12489 SHA256sum: d5352fec309545bc4e31b22689afa55d7c8bc01aad9e572c788e7854f611ecfa Description: netjson plugin with JSON output Package: olsrd-mod-p2pd Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 8579 SHA256sum: 1854abc3ca21dc278974c56b035bfa5cef196eddf9bda6a57c32e2984e56e91d Description: Peer to Peer Discovery plugin Package: olsrd-mod-pgraph Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 3515 SHA256sum: a3bc9ded708037515e20dc13f2c37573091f903a8ce1e14cc5ef915334e23451 Description: output network topology for pgraph Package: olsrd-mod-pud Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd, libgps30 License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 153600 Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 59406 SHA256sum: 519d61b79169dd0d9481d0eee3a69336a51ae18c00827f48d203c52ac2ee5ac6 Description: Position Update Distribution plugin Package: olsrd-mod-quagga Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 6613 SHA256sum: 96691b6f684fc21c1b68d5f9cdb583ee4a73b2203f6a114fc4a23bc890800f7c Description: Quagga plugin Package: olsrd-mod-secure Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 10612 SHA256sum: 1f52b31fb54a27d6d87e920c57d3dafdad1f9fcb572605ed53251879f90f8574 Description: Message signing plugin to secure routing domain Package: olsrd-mod-sgwdynspeed Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 4978 SHA256sum: 2bf8f9e4d93877638139e4a47913d3e646bdd6f5299affa3b493751504f8fd41 Description: Smart Gateway dynamic speed plugin Package: olsrd-mod-txtinfo Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 71680 Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 13762 SHA256sum: 43aefdfb492df40ceff705acb1d6b748fc17cd29da7c61610cdde5fabdf445fb Description: Small informative web server plugin Package: olsrd-mod-watchdog Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 81920 Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 2433 SHA256sum: 6e8ef81df3165ffcdbcf723d41987270e4e6c27061c9597c3f3f56c539df5a71 Description: Watchdog plugin Package: olsrd-utils Version: 2024.06.09~d72be9ad-r1 Depends: libc, olsrd License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 10240 Filename: olsrd-utils_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 1950 SHA256sum: d99faf8db2289ef2e971d30c539940379fef72744ef04f2c0066d8e660b5af36 Description: Utils for OLSRD Package: olsrd Version: 2024.06.09~d72be9ad-r1 Depends: libc, libpthread, libubus20241020, iptables, ip6tables License: BSD-3-Clause Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 307200 Filename: olsrd_2024.06.09~d72be9ad-r1_mips_4kec.ipk Size: 127110 SHA256sum: 3250815e80442dabbea739605e2548d2a3bbacd6a710bd9c6a279c4bd00b64b6 Description: OLSR (Optimized Link State Routing) daemon Package: oonf-dlep-proxy Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 296960 Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_mips_4kec.ipk Size: 136611 SHA256sum: dd4f9635e16da84d228130b68137d2909adb5d5eac457c6c8930eb72e0010e14 Description: Build DLEP Radio+Router Agent Package: oonf-dlep-radio Version: 2022.08.25~fb15d54d Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 296960 Filename: oonf-dlep-radio_2022.08.25~fb15d54d_mips_4kec.ipk Size: 133356 SHA256sum: 5965f444d559c6c73dfa48087c25944077c33323d8ffab24bc017afba85dbb0b Description: Build DLEP Radio Agent Package: oonf-init-scripts Version: 0.9.1-r3 Depends: libc Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 10240 Filename: oonf-init-scripts_0.9.1-r3_mips_4kec.ipk Size: 2297 SHA256sum: f1170e9b1c2d9f6f72417c6442d954c1568579d23a44837e13c59b120775f99e Description: Common OONF startup scripts Package: oonf-olsrd2 Version: 2022.08.25~1cec9b21 Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts Section: net URL: http://www.olsr.org/ Architecture: mips_4kec Installed-Size: 440320 Filename: oonf-olsrd2_2022.08.25~1cec9b21_mips_4kec.ipk Size: 198570 SHA256sum: 3156409c0f4d9a82f6eefbdefee15b61bd4a5f907bf9f0e85abbeb21058002ef Description: Build Olsrd V2 Routing Agent Package: opennds Version: 10.3.0-r1 Depends: libc, libmicrohttpd-no-ssl Conflicts: nodogsplash License: GPL-2.0-or-later Section: net URL: https://github.com/opennds/opennds Architecture: mips_4kec Installed-Size: 634880 Filename: opennds_10.3.0-r1_mips_4kec.ipk Size: 156994 SHA256sum: 029b697c4c703c8818cd16675fb81060bc012f7e4e8a074ed51c70c151620d90 Description: openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal. It provides a border control gateway between a public local area network and the Internet. It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points. Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported. This version uses nftables. Package: pimbd Version: 2018.06.19~dbf4e591-r4 Depends: libc, netifd License: Apache-2.0 Section: net URL: https://github.com/Oryon/pimbd.git Architecture: mips_4kec Installed-Size: 153600 Filename: pimbd_2018.06.19~dbf4e591-r4_mips_4kec.ipk Size: 72118 SHA256sum: 1e9c21042f92fab6bdff9d2fc0b742d17d491d0aadb5b41a2b6d73913a5d756c Description: This package provides a daemon which implements the Protocol Independent Multicast BIDIR routing protocol. Note that a routing protocol must be installed and running in order for PIM to function. Package: prince Version: 0.4-r3 Depends: libc, libjson-c5, libpthread License: MIT Section: net URL: https://github.com/AdvancedNetworkingSystems/prince Architecture: mips_4kec Installed-Size: 215040 Filename: prince_0.4-r3_mips_4kec.ipk Size: 33811 SHA256sum: d882e2287024f0c5da0ae5a64260792da680c522a208d221bf10dd5867806e73 Description: Prince is an open source implementation of the PopRouting Algorithm. It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento. Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc), calculates the betweenness centrality using the topology and then computes the the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon. Since v0.4 it supports both OONF and OLSRd. Package: vis Version: 2013.04.07~7710cce4-r9 Depends: libc, libpthread License: GPL-2.0-only Section: net URL: https://www.open-mesh.org/ Architecture: mips_4kec Installed-Size: 81920 Filename: vis_2013.04.07~7710cce4-r9_mips_4kec.ipk Size: 9757 SHA256sum: d32327f7855b772dbbd77dc982c81e7b8108e19ca3bf0e94cc3f9863b747731b Description: visualization server for B.A.T.M.A.N. layer 3 Package: zonestitcher Version: 2020.05.22~0dfef1eb-r3 Depends: libc, libubox20240329 License: GPL-2.0-only Section: net URL: https://github.com/sbyx/ohybridproxy Architecture: mips_4kec Installed-Size: 71680 Filename: zonestitcher_2020.05.22~0dfef1eb-r3_mips_4kec.ipk Size: 7827 SHA256sum: 3cb45e4fe41866da26fec22c5fc2ef0e8332d7eea7f41749068b6cb156f6bb30 Description: This package provides a statically configured daemon for translating DNS requests to Multicast DNS and back again.