Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: arm_xscale
Installed-Size: 61440
Filename: ahcpd_0.53-r3_arm_xscale.ipk
Size: 22767
SHA256sum: b2f88abbfb2d21f10ac2507c2c24e2befa2bf00b7f7f6297078d0f818be45252
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_xscale
Installed-Size: 71680
Filename: alfred_2024.3-r1_arm_xscale.ipk
Size: 26217
SHA256sum: 4e95a792e398e3e746fb9b7dd9e33f7c12b7e8821af0c251f0e618b2e26a48d3
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: arm_xscale
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_arm_xscale.ipk
Size: 4623
SHA256sum: 102c1d9955c930286dbaa5a4f3017165a6f114e33419694ae77faf7baf805aa3
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: arm_xscale
Installed-Size: 133120
Filename: babeld_1.13.1-r2_arm_xscale.ipk
Size: 63257
SHA256sum: 927cefa5b23989aa6755a4e0811d83f61e8321923f3a1c22d24e82de4d523a50
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_xscale
Installed-Size: 102400
Filename: batctl-default_2024.3-r1_arm_xscale.ipk
Size: 43577
SHA256sum: 854f30de21ddfb62b1c080169b6b20494e94bbe8df937cdde621750ae0814730
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_xscale
Installed-Size: 112640
Filename: batctl-full_2024.3-r1_arm_xscale.ipk
Size: 50805
SHA256sum: 46b2df31ebafa9e32e3915e9add0d6304f59982427cf56b9531c5804e2f902b5
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_xscale
Installed-Size: 40960
Filename: batctl-tiny_2024.3-r1_arm_xscale.ipk
Size: 14774
SHA256sum: e8f900cca96594eaf00db32f973fdfacf36d9dbf53c8e1bafe0086b9bbdbde1b
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_xscale
Installed-Size: 102400
Filename: batmand_1440-r1_arm_xscale.ipk
Size: 43275
SHA256sum: a824178d7251f42cd2d4892f506de8429dc3004116f5e5dd423950672f3acfb8
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_xscale
Installed-Size: 983040
Filename: bird2_2.15.1-r1_arm_xscale.ipk
Size: 385346
SHA256sum: dd73326b4f2f2b6d5883ab609e43c95fd47864f4b334d3e22fdf53f7d83bf1a5
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_xscale
Installed-Size: 30720
Filename: bird2c_2.15.1-r1_arm_xscale.ipk
Size: 10455
SHA256sum: a590d34b9fc6228c415dd3ec7d333b554e40be84897ae890289f73c60de5e839
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_xscale
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_arm_xscale.ipk
Size: 9050
SHA256sum: 586f18f2cf0fc82b254e4bc782c40fbc183198063b6efca137f88289550664ad
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024061001-r1_arm_xscale.ipk
Size: 4818
SHA256sum: 5d3cd32f96222f78e047e6a3a2ba2780d2cfcda630e9ec98eb8b125d42ea395f
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 20480
Filename: bmx7-json_r2024061001-r1_arm_xscale.ipk
Size: 8474
SHA256sum: 4a69e395a61506be498f033a255798518d26f603e8c2dc13b73a04f56629a2a6
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 20480
Filename: bmx7-sms_r2024061001-r1_arm_xscale.ipk
Size: 6077
SHA256sum: 1650636f8db925cffc6db5dc776a49e2725b64fb8aa90c8018a0d07a9bd80d2c
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 30720
Filename: bmx7-table_r2024061001-r1_arm_xscale.ipk
Size: 10288
SHA256sum: 10d22ebc41c3196b252807ca8123b33453f526978146c31268a91de86709e014
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 20480
Filename: bmx7-topology_r2024061001-r1_arm_xscale.ipk
Size: 5747
SHA256sum: c73deeaf80206e962ae98c4ee55e255adde62a7b858337a84d85a5677270a242
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 61440
Filename: bmx7-tun_r2024061001-r1_arm_xscale.ipk
Size: 26399
SHA256sum: 305dd80221d349ab95a4a23b0eefa17ed8013474c0f5fd5f726fca43133ee4de
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 30720
Filename: bmx7-uci-config_r2024061001-r1_arm_xscale.ipk
Size: 8895
SHA256sum: c23861e52e898dbc3d0908b3e20f0129b1e4d26e456e11de50351830c6c3832d
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_xscale
Installed-Size: 348160
Filename: bmx7_r2024061001-r1_arm_xscale.ipk
Size: 172936
SHA256sum: a2ba60fb4cd898d8f31d2bcf0e3f2f822be7c117f11d22fa94cf6d03965115d1
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_xscale
Installed-Size: 747520
Filename: cjdns-tests_21.1-r6_arm_xscale.ipk
Size: 344877
SHA256sum: 53893ea2e34e75d21a8fda3d5b3129f090734d8afb3d9d55aa2b58565ec6f296
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_xscale
Installed-Size: 890880
Filename: cjdns_21.1-r6_arm_xscale.ipk
Size: 399204
SHA256sum: d364711e02efb937f385e3117b0005850f7983e35b6869a8ca7a829ea047d976
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_xscale
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_arm_xscale.ipk
Size: 1422
SHA256sum: cccb56c276f526b482f1f234036a737c011bc865132320b14b0c7210190a3fcd
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_xscale
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_arm_xscale.ipk
Size: 958
SHA256sum: 9a2a63d88f0cf1159308b25eda8babac027cf087896ac0b39254c1978c61e9ab
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_xscale
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_arm_xscale.ipk
Size: 943
SHA256sum: e85e8a39224f27d999e9bbcb129271da917e8e2475065af7af94cbcbb287911b
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_xscale
Installed-Size: 215040
Filename: hnetd-nossl_2018.12.21~c4376661-r1_arm_xscale.ipk
Size: 94633
SHA256sum: f570813720e9273e252a6d6e74b9aed7f28f34324fa508d87faeb9374743b39a
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_xscale
Installed-Size: 235520
Filename: hnetd-openssl_2018.12.21~c4376661-r1_arm_xscale.ipk
Size: 104439
SHA256sum: 3629413080df524c37ecba9df2fedffbdb59b0c7691c1cff779bfdb4dc4a2360
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_xscale
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_arm_xscale.ipk
Size: 6582
SHA256sum: 0af1e6cecd575efb7618120b55f112138356edde1eed38ad47293bc95d06b065
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: arm_xscale
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_arm_xscale.ipk
Size: 57616
SHA256sum: 2fa3a9d518f9c0c472bbd75e255171b1b4e0f2b9573a31c82f33e984ef90a413
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7783
SHA256sum: 45396eec128b51dbf2cce4ef4e75c5ca52ad48081beccca89d280646078a875d
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: ce5ac802cf56ecb81de77106fb70632fcfffa643368293ac7286b1f2283de60e
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: arm_xscale
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_arm_xscale.ipk
Size: 7248
SHA256sum: 5985c536857c87103f509738da9f6ef8342a413a982e195533cb5784250643f1
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2852
SHA256sum: 3aa1a6b591ce1d7e6d68ae27918c99930a85b70044e59c333cd610f4ce5edc2e
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: arm_xscale
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_arm_xscale.ipk
Size: 32592
SHA256sum: 30bd25f6991e637b75ef9bc8e7e276310e6b57c6191fe52d0c5d86923f293e67
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: arm_xscale
Installed-Size: 122880
Filename: nodogsplash_5.0.2-r1_arm_xscale.ipk
Size: 47560
SHA256sum: ec6d77f01eb5101a41974b50c959985fa0204d185549ad80f0a71638fb79cadf
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_xscale
Installed-Size: 30720
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_arm_xscale.ipk
Size: 11146
SHA256sum: 8a074c8544eaeb4f362938f6f00d48706e64d3d6906744e3ce9dbe8cb58e61b2
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 10240
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 2776
SHA256sum: f645a3df4fecfb5f3defbe96cb84f54b551243b4962ccdc2a9d467a0a0b6de4e
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 30720
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 12922
SHA256sum: 7c328812e49262f03517ea91d29095e8371c6038c54efaf8afda0484756636ef
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 4571
SHA256sum: b82352dd89bfc73ca24f4a448db2363fdb85d46ea74ab1626d198f1b465b3f3e
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 3057
SHA256sum: 3c480ce5cf01aaaa0851968f5bf243028927eda145289b388f4e96fac25bae74
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 4740
SHA256sum: 677b45818c0915770319a43ec7b6df039dd6dc9a69b11a4ad2bc55e6892099bc
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 3283
SHA256sum: 197d2f41cfe63c6f927514fc184bfd4f8a1df259b59a03d605756ff27cd71707
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 33481
SHA256sum: cfd46254dd984003803bb020a73cbda3d369ca43759f306bf7edb34120df6aa4
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 25427
SHA256sum: 5104256115fabd4f8c096ebc7efa1019c908e0ace8466929f3381c3d243da73e
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 30720
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 9788
SHA256sum: 85e4a905feaf5a8bb982d7d1d71cd0e44ec52c47b40cc2e0e75c8878d919eb18
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 30720
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 11697
SHA256sum: 3ca3c32fda79967ec5018ba2f72fc6c9fba487679db1b06ac72e6555bee3d7e6
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 40960
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 14504
SHA256sum: 4fd932d2e7c20fa63a4aad1fc2457f91d6af85df87c93831cb42f3db71dc17b0
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 9039
SHA256sum: d7df705dc35288f0d7cc20ed574b24db5429378aadebef03debcbd9efa6a5d6f
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 3642
SHA256sum: 26dd6ce4c4ab5ce0cc4337bc410a085a4fcdfa3af74eecfe955036317071e0f2
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 174080
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 61395
SHA256sum: 8f88b6ac89317dd1d5a2d8e244eabc9a958ce97661f8f9ae1e5f1185bcba29ad
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 6846
SHA256sum: 978090ab39bd852715afa30d5bad2ea865b8ae71276bec3b48bfcae0b0ca62d4
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 30720
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 11079
SHA256sum: d2c08faad7c3384bee228e8d7b34e102f24d1ca511cd3e79659b859920e025c7
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 5094
SHA256sum: e561bbd85c1d862c20ade0d8ba3977686b336d8f857e889ebeb218a62ac9ae43
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 16412
SHA256sum: 50beb057ad533e6fc976644bdaf61f6a87ad214c31851e73f199e8e8b6ec3644
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 10240
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 2349
SHA256sum: a9c48e54de8326b0d793d98450f96ecc06eab1ffeada5b18d2ae0c0386741cc4
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 1955
SHA256sum: f086d1fb47ec63cba66df779ab1788a477da77cc7b0652b42f613b09eaf60835
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 327680
Filename: olsrd_2024.06.09~d72be9ad-r1_arm_xscale.ipk
Size: 141803
SHA256sum: 97aa604af192985025ba3ed85df6eacb8ffad89622ab39be3981b86e6fe7a74b
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 378880
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_arm_xscale.ipk
Size: 162336
SHA256sum: 5d3c89dabdac3c8e9b43b1da87acb01317978c081b492a1ff304143426bab4f4
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 368640
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_arm_xscale.ipk
Size: 158294
SHA256sum: 67692e4382ba56ec74f4a69010622209deca51d06b09bd7185619f42c111145c
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_arm_xscale.ipk
Size: 2299
SHA256sum: 7d95601f38f415e0ce45f808e11ee410fdf54a8162101d965d8525d8e97e824f
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_xscale
Installed-Size: 532480
Filename: oonf-olsrd2_2022.08.25~1cec9b21_arm_xscale.ipk
Size: 235570
SHA256sum: 59610e939be71676acdf1d236a2cc9d55a2ca7353d43fc3ece9cf4559250c7c4
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: arm_xscale
Installed-Size: 563200
Filename: opennds_10.3.0-r1_arm_xscale.ipk
Size: 163132
SHA256sum: 95653b8caedaae292e69ccb4421c7dec31e0e7a192b66d9210a78145b20f17ce
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: arm_xscale
Installed-Size: 194560
Filename: pimbd_2018.06.19~dbf4e591-r4_arm_xscale.ipk
Size: 83701
SHA256sum: 5b2027b2608bbdea255cf4fabf63c59b35b911daf5aff54b39860816917042f3
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: arm_xscale
Installed-Size: 81920
Filename: prince_0.4-r3_arm_xscale.ipk
Size: 27929
SHA256sum: 07b888fac044c1211374bb43df277a5796eeb374669b83e87fdb7781b76ee6fa
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_xscale
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_arm_xscale.ipk
Size: 11131
SHA256sum: fb5e6c8e23197cfbe044a65642a5a68a3f33a1d570067fd0f91b0da2dac19dc0
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_xscale
Installed-Size: 20480
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_arm_xscale.ipk
Size: 9019
SHA256sum: e96d4e2d5823438e2c41bca34584e90f9c91738f9b0751ad062bab9478379315
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.