Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: arm_fa526
Installed-Size: 61440
Filename: ahcpd_0.53-r3_arm_fa526.ipk
Size: 22747
SHA256sum: e07bea304f63e1f22877d568b8f9170d25cfd4af9842ed223f6eb85f2d845f49
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 71680
Filename: alfred_2024.3-r1_arm_fa526.ipk
Size: 26114
SHA256sum: 68cded500cf14fc66bf08600862b202aec0b79e6314b692ed7327033256bcec4
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: arm_fa526
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_arm_fa526.ipk
Size: 4622
SHA256sum: e019ab5b1a0d6c0049cb8580431a3f9fd839ad3b49a7d6ef1bb1b9811e1b8ec7
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: arm_fa526
Installed-Size: 133120
Filename: babeld_1.13.1-r2_arm_fa526.ipk
Size: 63363
SHA256sum: 23c59d33a52456122f1537598fbe92e5e6ab5a05af4afde940769fae862bb1c0
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 102400
Filename: batctl-default_2024.3-r1_arm_fa526.ipk
Size: 43645
SHA256sum: fc8439873b186067a6ec300df26ce475c52957dcdd7348fc28f938053ca59c4d
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 112640
Filename: batctl-full_2024.3-r1_arm_fa526.ipk
Size: 50657
SHA256sum: 425c745fc88c9243bd1eec7b8842dedae9d47f284fe7f2acfe7e911540d10d35
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: batctl-tiny_2024.3-r1_arm_fa526.ipk
Size: 14721
SHA256sum: c4a3c93b7f0ec2771c5eb603eff3bb2e6fe5e47cc0aef2db334f18a35fb319a1
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 102400
Filename: batmand_1440-r1_arm_fa526.ipk
Size: 43338
SHA256sum: 592de5e5d7dee2f70ece4908abb4e7e5c79cef143d0bc01ce354c5655861f1ad
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 983040
Filename: bird2_2.15.1-r1_arm_fa526.ipk
Size: 385333
SHA256sum: 4bfbbdf4368b50b805b8d0333a7296ec6bd41e42644b4f563b467cd317b0a0f0
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 30720
Filename: bird2c_2.15.1-r1_arm_fa526.ipk
Size: 10471
SHA256sum: 96a055b549bdf781d2d54221457192bf864df4a6bc42bc4fb867712b1b45e8f2
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_fa526
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_arm_fa526.ipk
Size: 9058
SHA256sum: 463fbd249b18204c9dcca68e42fe55fe5d6626c211fcee868b0db54ce9be6e2c
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024061001-r1_arm_fa526.ipk
Size: 4839
SHA256sum: 718b6113d7f11f871731a8bf39c6bfda47a34de95c2fe94d4ae2a6096eee9480
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-json_r2024061001-r1_arm_fa526.ipk
Size: 8480
SHA256sum: 349a3ffceed216ab40f014222c823e051dc9728f6f79492d6dca4f7e336a1554
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-sms_r2024061001-r1_arm_fa526.ipk
Size: 6114
SHA256sum: 0d991b42da59e6a28d38ebc42fd5edfd37cf9c70eaa80989ccaa1ff49f837875
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 30720
Filename: bmx7-table_r2024061001-r1_arm_fa526.ipk
Size: 10295
SHA256sum: eef39c1765d059d25ed1d205fc7b2d2e6c2323695d9456eb351b0fdc2131c4ec
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 20480
Filename: bmx7-topology_r2024061001-r1_arm_fa526.ipk
Size: 5791
SHA256sum: 767e6160984917f65edd026ed53c721383f56ff8f87507c4bfac31b5d7bac88f
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 61440
Filename: bmx7-tun_r2024061001-r1_arm_fa526.ipk
Size: 26538
SHA256sum: 903104a3488ef78762f18929bf5402736b419c831939213c31efc89d478c2f44
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 30720
Filename: bmx7-uci-config_r2024061001-r1_arm_fa526.ipk
Size: 8892
SHA256sum: 1e79bcb89250a7e693266c5d74ee752e4cea8cbfd6c6b5586b58abed2abab7e2
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_fa526
Installed-Size: 348160
Filename: bmx7_r2024061001-r1_arm_fa526.ipk
Size: 173123
SHA256sum: 128676bba92e91abdfafafab6e51633be7f536cff9293cabb52b8b77bccd376d
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 747520
Filename: cjdns-tests_21.1-r6_arm_fa526.ipk
Size: 345832
SHA256sum: 4faf86092a09622408c0511210d33d9d65a4c7a8e9b42d280681a14c3ac7317d
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 890880
Filename: cjdns_21.1-r6_arm_fa526.ipk
Size: 399944
SHA256sum: 31cbc62bffb00e97454b42e12fc5fd6e3d3a0f8bd99b61c3222d3e4e3dc46d9b
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 1424
SHA256sum: 7a303c921a4df4d4602098b3bf5b62aed98566563c9e91cba8af2220fabd42ad
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 957
SHA256sum: a658577c8b4fa94094f6721af1244c420ab4c3a820d6cfd8bfe1861dc374498a
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 946
SHA256sum: 27356b67d0f8e56104f17c8c35651dbb0436c2c3cbdc86cc67caafa99ae80eb7
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 215040
Filename: hnetd-nossl_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 94744
SHA256sum: 72c40068ee59431c81f4fd101951d0039fd9c54e564b1c8cea80fb05df83505f
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_fa526
Installed-Size: 235520
Filename: hnetd-openssl_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 104655
SHA256sum: c361bfffefdb22644b8dde90ee089a912a873896c69372aef448c1bbc7f18dd7
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_fa526
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_arm_fa526.ipk
Size: 6587
SHA256sum: c984c96cae54e5797539c284e16f6544976e8a45b40e1c0075b3cc78883db1ed
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: arm_fa526
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_arm_fa526.ipk
Size: 57613
SHA256sum: f28329e3957051ff68fb9e7793b0c23d2bcf0032ef6f2f316f157773b1267c9c
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7783
SHA256sum: 45396eec128b51dbf2cce4ef4e75c5ca52ad48081beccca89d280646078a875d
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: ce5ac802cf56ecb81de77106fb70632fcfffa643368293ac7286b1f2283de60e
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: arm_fa526
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_arm_fa526.ipk
Size: 7192
SHA256sum: 53c8aff82c95bfa66a6db7558911dd11cf5490c970e91e98f1b6e6a02395a904
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2852
SHA256sum: 3aa1a6b591ce1d7e6d68ae27918c99930a85b70044e59c333cd610f4ce5edc2e
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: arm_fa526
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_arm_fa526.ipk
Size: 32547
SHA256sum: f62a6f0c353ac5c953a2cc979101918096685210e4977f12f3fb29ba1a13a848
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: arm_fa526
Installed-Size: 122880
Filename: nodogsplash_5.0.2-r1_arm_fa526.ipk
Size: 47603
SHA256sum: 05e56760c1125e49b4328890ba15c408b392044d5451b5db87d2ec7b166a8b82
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_fa526
Installed-Size: 30720
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_arm_fa526.ipk
Size: 11167
SHA256sum: 9da5c387c8adf80f697d7decdd7e4d94923cdff0c7d0adb6cc4de8eb5c3f0cf6
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 2736
SHA256sum: e79d0dea68d8b4e550e9fed85351e6e13829506883441b70ba67f5cf99f286d2
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 12909
SHA256sum: 67bbeef1fbf9d729d356775a256f930c100cc4eba0903b9cf76346ece0a61254
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 4580
SHA256sum: 8998e64fb0378bf8f812295ed5ac0279dfaebdc8089b33d1ad35b4872de90b49
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 3067
SHA256sum: 648ce80014fdf731da05c9fb655e3d3122b800f90f1fac4d18445490068cbcb4
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 4738
SHA256sum: 1a30c0cf1f50db6979ce9ff062e3c94f6b8fa524ffde906aee9261776ea57b53
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 3289
SHA256sum: 5316f09fb5d4a1bf542b3c677c6dd8f83b7c2a1c8e5cf112dc53e623c1bebe6b
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 33499
SHA256sum: eca56337762769c9bb652dea2fccd41591b98cec57cb150ad02a334e25f0e782
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 25348
SHA256sum: 865939301ec2153b0cd7b0c191a63b4a6a5f5f9a719a378d1c3eb0607354da0a
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 9776
SHA256sum: ceb2e292b96d1f39523135cc647175c8ff10bb91eb58c210b1db6369178dc60f
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 11746
SHA256sum: 555c649ec19a04e1a4e060fd7ee462de9faf9c76be06227d4837979552b336c2
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 14500
SHA256sum: 325d1b471b51e3569898341eac54a864d0c3189efd80ad9fc5bc20c07d12b0aa
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 9009
SHA256sum: abb2f2c091fd17a6012c5b0c06250ec44779f22f81bca0e7c94ef7b766e5c6d2
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 3665
SHA256sum: b8b6a9550aef1b67996c80a1fa13c6d9a0e9460f03fe961d53418cf2fa5adb4e
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 184320
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 62289
SHA256sum: 320ab4b403ae332d64e465b7288c36209a10dced6d04239b9ae62629fc289065
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 6810
SHA256sum: a63a1a516a768ea8d9419ab42bc2399eb8cb5cbc658aad1e7027d61da7726e44
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 11097
SHA256sum: 74f106ff479b74e1bec33386e6d91ff95b8f1e0b5df8f016240badd104cc1e40
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 5072
SHA256sum: 8f2f9b3c12dc02542c0c864c49052ccb5cde07755b5bf397145c3994b4298e85
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 16415
SHA256sum: c9eaa410f585e8e4c48a9809265402bc6576bfedc9e566dffd161f19db65773c
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 2355
SHA256sum: ab9332d2ef0f8686330bdecdd82ad04d364031beec1a77039ac09a6a7ca90823
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 1952
SHA256sum: 50c1a2c892976dd09a59e56eff624dbbddd5c0daa14b6fbefaad52cffa465019
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 327680
Filename: olsrd_2024.06.09~d72be9ad-r1_arm_fa526.ipk
Size: 141891
SHA256sum: bd9e28dd2326faac7de0bc9bd55b439e2302406ea811ae515984061f4fa5b368
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 368640
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_arm_fa526.ipk
Size: 162216
SHA256sum: d89577473da5f6261519dfe360b8ee2c06e7940e7ba394d4d0371795fb97bf35
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 358400
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_arm_fa526.ipk
Size: 158053
SHA256sum: 2b76079c79cfbbbba26401367565639e59388565910885aea00f7e9e02d6a456
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_arm_fa526.ipk
Size: 2294
SHA256sum: de383342d6ed45fc7a0ac8e7a30f138171ecb876890bae6dd522abd8cce61bd1
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_fa526
Installed-Size: 532480
Filename: oonf-olsrd2_2022.08.25~1cec9b21_arm_fa526.ipk
Size: 234756
SHA256sum: 926eda0cdc31d3c5bf0d276a1a175087e2059ae239e5643f11ae8641c4d3dc32
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: arm_fa526
Installed-Size: 563200
Filename: opennds_10.3.0-r1_arm_fa526.ipk
Size: 163297
SHA256sum: 824ca376c1b35f0daa63c1e735b18fe135231601e07b6a487671b99392cef195
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: arm_fa526
Installed-Size: 194560
Filename: pimbd_2018.06.19~dbf4e591-r4_arm_fa526.ipk
Size: 83734
SHA256sum: 80b60c19d8399213f42d458c55fa0d14951b10d830f9d3731a6a4aedea5d7ff4
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: arm_fa526
Installed-Size: 81920
Filename: prince_0.4-r3_arm_fa526.ipk
Size: 28004
SHA256sum: b3a6824b143adff9186d91b3e4a28e2a15a28b9cb59043dbd8b9144d12a602a7
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_fa526
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_arm_fa526.ipk
Size: 11126
SHA256sum: a8ffc49fbb85166febb481085085617b1f573943e985a36ef2954c2e8e219ea4
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_fa526
Installed-Size: 20480
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_arm_fa526.ipk
Size: 9031
SHA256sum: 3a0ed055e2ca6d4723d25b9bd034ae21c8d492fdca4b9d5483ffa32be655c1f5
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.