Package: ahcpd
Version: 0.53-r3
Depends: libc, ip, librt
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/ahcp/
Architecture: arm_arm926ej-s
Installed-Size: 61440
Filename: ahcpd_0.53-r3_arm_arm926ej-s.ipk
Size: 22783
SHA256sum: 2720963c6417184a8474e3a0c45428650c7dbb1d87db3434b0302eb23c35d6ef
Description:  Ahcpd is a daemon for configuring an IPv6 network using the Ad-Hoc
 Configuration Protocol (AHCP).  AHCP is designed for wireless mesh
 networks, where IPv6 autoconfiguration and DHCPv6 do not work, but may
 also be used on wired networks.

Package: alfred
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
License: GPL-2.0-only MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_arm926ej-s
Installed-Size: 71680
Filename: alfred_2024.3-r1_arm_arm926ej-s.ipk
Size: 26172
SHA256sum: e762b728c00178def406460018fc4c0756d9019175867950bd5cd284179f4cb9
Description:  alfred is a user space daemon for distributing arbitrary local information
 over the mesh/network in a decentralized fashion. This data can be anything
 which appears to be useful - originally designed to replace the batman-adv
 visualization (vis), you may distribute hostnames, phone books, administration
 information, DNS information, the local weather forecast ...
 
 alfred runs as daemon in the background of the system. A user may insert
 information by using the alfred binary on the command line, or use special
 programs to communicate with alfred (done via unix sockets). alfred then takes
 care of distributing the local information to other alfred servers on other
 nodes. This is done via IPv6 link-local multicast, and does not require any
 configuration. A user can request data from alfred, and will receive the
 information available from all alfred servers in the network.

Package: babel-pinger
Version: 0.1-r1
Depends: libc, librt
Section: net
URL: http://www.pps.univ-paris-diderot.fr/~jch/software/babel/
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: babel-pinger_0.1-r1_arm_arm926ej-s.ipk
Size: 4642
SHA256sum: 3a1af1e71de2d018d929ab7fea34482591fa34a2fb88f62c663bee21919ffdf8
Description:  Babel-pinger is a hack to export a default route into Babel for people
 using DHCP to configure their routers rather than speaking to their
 upstream provider with a proper routing protocol.

Package: babeld
Version: 1.13.1-r2
Depends: libc, libubus20241020, libubox20240329
License: MIT
Section: net
URL: https://www.irif.fr/~jch/software/babel/
Architecture: arm_arm926ej-s
Installed-Size: 133120
Filename: babeld_1.13.1-r2_arm_arm926ej-s.ipk
Size: 63160
SHA256sum: 17d080c995e5ea66782e0942ac1e2b8165b5ad1338894ba383b8f77ce01a3819
Description:  Babel is a loop-avoiding distance-vector routing protocol for IPv6 and IPv4
 with fast convergence properties. It is based on the ideas in DSDV, AODV and
 Cisco's EIGRP, but is designed to work well not only in wired networks but
 also in wireless mesh networks, and has been extended with support for
 overlay networks. Babel is an IETF standard protocol (RFC 8966).

Package: batctl-default
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 200:/usr/sbin/batctl:/usr/libexec/batctl-default
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_arm926ej-s
Installed-Size: 102400
Filename: batctl-default_2024.3-r1_arm_arm926ej-s.ipk
Size: 43600
SHA256sum: a7875d5dd27e4bb8636e2cec1b50f46337f6017a561e2b9bf1a84e477f69c833
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Standard subcommands for configuration and online debugging are enabled.

Package: batctl-full
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 300:/usr/sbin/batctl:/usr/libexec/batctl-full
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_arm926ej-s
Installed-Size: 112640
Filename: batctl-full_2024.3-r1_arm_arm926ej-s.ipk
Size: 50734
SHA256sum: c9f44ca503964d23ebfd25e93c49df9623aba9aaf1224a120b9bd1bbeab6ca26
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Subcommands for configuration, online and offline debugging are enabled.

Package: batctl-tiny
Version: 2024.3-r1
Depends: libc, libnl-tiny1, librt
Provides: batctl
Alternatives: 100:/usr/sbin/batctl:/usr/libexec/batctl-tiny
License: GPL-2.0-only ISC MIT
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_arm926ej-s
Installed-Size: 40960
Filename: batctl-tiny_2024.3-r1_arm_arm926ej-s.ipk
Size: 14718
SHA256sum: 4495671788abfdaf40754279933857a1934a0966fb078f126dccbd15b4dbdbde
Description:  batctl is a more intuitive managment utility for B.A.T.M.A.N.-Advanced.
 It is an easier method for configuring batman-adv and provides some
 additional tools for debugging as well. This package builds
 version 2024.3 of the user space utility.
 Only configuration relevant subcommands are enabled.

Package: batmand
Version: 1440-r1
Depends: libc, libpthread, kmod-tun
License: GPL-2.0
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_arm926ej-s
Installed-Size: 102400
Filename: batmand_1440-r1_arm_arm926ej-s.ipk
Size: 43231
SHA256sum: 8e387fa8ef8a2fa297f12a4d4dca318a22f69b139e3faf92bcdb8cb548981441
Description:  B.A.T.M.A.N. layer 3 routing daemon

Package: bird2
Version: 2.15.1-r1
Depends: libc, libpthread
Conflicts: bird1-ipv4, bird1-ipv6, bird4, bird6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_arm926ej-s
Installed-Size: 983040
Filename: bird2_2.15.1-r1_arm_arm926ej-s.ipk
Size: 384954
SHA256sum: 98e24bc2cdb700541f1043f2d4b5c698b69f4811024c0198de8a7180dfa40119
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 BIRD supports OSPFv2, RIPv2, Babel and BGP protocols for IPv4 and
 OSPFv3, RIPng, Babel and BGP protocols for IPv6.
 
 In BGP, BIRD supports communities, multiprotocol extensions, MD5
 authentication, 32bit AS numbers and could act as a route server or a
 route reflector. BIRD also supports multiple RIBs, multiple kernel
 routing tables and redistribution between the protocols with a powerful
 configuration syntax.
 
 This is the 2.0 branch of Bird which integrates support for IPv4 and IPv6
 into a single branch, and also adds support for the Babel routing protocol.

Package: bird2c
Version: 2.15.1-r1
Depends: libc, bird2, libreadline8, libncurses6
Conflicts: bird1c-ipv4, bird1c-ipv6, birdc4, birdc6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_arm926ej-s
Installed-Size: 30720
Filename: bird2c_2.15.1-r1_arm_arm926ej-s.ipk
Size: 10461
SHA256sum: 5d7d61e77d5c078807e6242a320fc9e8f37e95e459388faaf3cea390022774c8
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD command-line client. It is used to send commands to BIRD,
 commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.
 
 Unless you can't afford dependency on ncurses and readline, you
 should install BIRD command-line client together with BIRD.

Package: bird2cl
Version: 2.15.1-r1
Depends: libc, bird2
Conflicts: bird1cl-ipv4, bird1cl-ipv6, birdcl4, birdcl6
License: GPL-2.0-or-later
Section: net
URL: http://bird.network.cz/
Architecture: arm_arm926ej-s
Installed-Size: 30720
Filename: bird2cl_2.15.1-r1_arm_arm926ej-s.ipk
Size: 9060
SHA256sum: eab38f0443a8c526332d089d55a3e7d277fb9235d1ee78262fd01a47f7ea88fa
Description:  BIRD is an internet routing daemon which manages TCP/IP routing tables
 with support of modern routing protocols, easy to use configuration
 interface and powerful route filtering language. It is lightweight and
 efficient and therefore appropriate for small embedded routers.
 
 
 This is a BIRD lightweight command-line client. It is used to send commands
 to BIRD, commands can perform simple actions such as enabling/disabling of
 protocols, telling BIRD to show various information, telling it to show
 a routing table filtered by a filter, or asking BIRD to reconfigure.

Package: bmx7-iwinfo
Version: r2024061001-r1
Depends: libc, bmx7, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: bmx7-iwinfo_r2024061001-r1_arm_arm926ej-s.ipk
Size: 4822
SHA256sum: d5961295d2517bcff9562354a91ec3e95d432b13efcbfde748a2745ea62f95a3
Description:  link characteristics plugin via libiwinfo (recommended!)

Package: bmx7-json
Version: r2024061001-r1
Depends: libc, bmx7, libjson-c5
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: bmx7-json_r2024061001-r1_arm_arm926ej-s.ipk
Size: 8416
SHA256sum: 806219baf1997399e3d7ec7cbae88358989663ffa0ff216c27e18da309e08fa5
Description:  json plugin based on json-c

Package: bmx7-sms
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: bmx7-sms_r2024061001-r1_arm_arm926ej-s.ipk
Size: 6081
SHA256sum: 1450a00fbc4556077e3538ddf8bf1bfc052f64a7f0bcc58b84b6f0cff66aee61
Description:  sms plugin

Package: bmx7-table
Version: r2024061001-r1
Depends: libc, bmx7, bmx7-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_arm926ej-s
Installed-Size: 30720
Filename: bmx7-table_r2024061001-r1_arm_arm926ej-s.ipk
Size: 10231
SHA256sum: 64d2fe346fc39f31aa5c1f9dd0975dff392ab257fec2d23f9f3fe811670ccbb6
Description:  plugin to announce routes from tables via tunnels

Package: bmx7-topology
Version: r2024061001-r1
Depends: libc, bmx7
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: bmx7-topology_r2024061001-r1_arm_arm926ej-s.ipk
Size: 5761
SHA256sum: eff2887746c6fca0b6f8bd5615dceb9bf405b7b68674686618bea92586e26bed
Description:  topology plugin

Package: bmx7-tun
Version: r2024061001-r1
Depends: libc, bmx7, kmod-ip6-tunnel, kmod-iptunnel6, kmod-tun
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_arm926ej-s
Installed-Size: 61440
Filename: bmx7-tun_r2024061001-r1_arm_arm926ej-s.ipk
Size: 26346
SHA256sum: 4a6bfd25e358acea2d3f5afab0353c2a582ac8c55996d89a96f326b0cdd735b2
Description:  ipip-based tunnel plugin (recommended!)

Package: bmx7-uci-config
Version: r2024061001-r1
Depends: libc, bmx7, libuci20130104
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_arm926ej-s
Installed-Size: 30720
Filename: bmx7-uci-config_r2024061001-r1_arm_arm926ej-s.ipk
Size: 8886
SHA256sum: a49f1ae5853a3656a1171574294941def4bcc238f6249c20795339172eb3109c
Description:  configuration plugin based on uci (recommended!)

Package: bmx7
Version: r2024061001-r1
Depends: libc, zlib, libmbedtls21, libiwinfo20230701
License: GPL-2.0-or-later
Section: net
URL: https://github.com/bmx-routing/bmx7
Architecture: arm_arm926ej-s
Installed-Size: 348160
Filename: bmx7_r2024061001-r1_arm_arm926ej-s.ipk
Size: 172377
SHA256sum: 0c87eb168f3d0c0b187455d7cc05b1ba8f7e4f0ab88bcebc18aa43c048d6525e
Description:  BMX7 routing daemon supporting securely-entrusted IPv6 (and IPv4in6) routing

Package: cjdns-tests
Version: 21.1-r6
Depends: libc, libpthread, librt
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_arm926ej-s
Installed-Size: 747520
Filename: cjdns-tests_21.1-r6_arm_arm926ej-s.ipk
Size: 345343
SHA256sum: 75241bce1a0640dfccb7df39d4e9c234dc75250b728fc6b265816146836318c0
Description:  cjdns test cases

Package: cjdns
Version: 21.1-r6
Depends: libc, kmod-tun, libnl-tiny1, libpthread, librt, libuci-lua, lua-bencode, dkjson, luasocket, lua-sha2
License: GPL-3.0-or-later
Section: net
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_arm926ej-s
Installed-Size: 890880
Filename: cjdns_21.1-r6_arm_arm926ej-s.ipk
Size: 399283
SHA256sum: e66844edad6b83c8830736cd56c94cb038eebc7de5e93306ca205df0453e7e84
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: hnet-full-l2tp
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip-full, kmod-l2tp-eth, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_arm926ej-s
Installed-Size: 10240
Filename: hnet-full-l2tp_2018.12.21~c4376661-r1_arm_arm926ej-s.ipk
Size: 1420
SHA256sum: 0bd017e5e3cbe3f12d2c7d30060515b4e2dfe3c8fb029e1e58ef9d8169ceee78
Description:  HNCP Homenet metapackage (w/ L2TP)

Package: hnet-full-secure
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-openssl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_arm926ej-s
Installed-Size: 10240
Filename: hnet-full-secure_2018.12.21~c4376661-r1_arm_arm926ej-s.ipk
Size: 958
SHA256sum: 88e0365d7440d76966322e154583d3756d4ed48338d6708f0a6d80814dacdf33
Description:  HNCP Homenet metapackage (w/ SSL)

Package: hnet-full
Version: 2018.12.21~c4376661-r1
Depends: libc, hnetd-nossl, luci-app-hnet, ip, babeld, ohybridproxy, zonestitcher, miniupnpd, minimalist-pcproxy
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_arm926ej-s
Installed-Size: 10240
Filename: hnet-full_2018.12.21~c4376661-r1_arm_arm926ej-s.ipk
Size: 942
SHA256sum: ac6e5835e5f350956c1f59f9f7f6a2dc3c349d52a8d52b74a8bc44a2b1010355
Description:  HNCP Homenet metapackage

Package: hnetd-nossl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_arm926ej-s
Installed-Size: 215040
Filename: hnetd-nossl_2018.12.21~c4376661-r1_arm_arm926ej-s.ipk
Size: 94499
SHA256sum: 4dcb8c734e7279159715bd384ba11bafe9821b013b8b4b738c8609e5dbc88b97
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: hnetd-openssl
Version: 2018.12.21~c4376661-r1
Depends: libc, odhcpd, odhcp6c, netifd, libopenssl3
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/hnetd
Architecture: arm_arm926ej-s
Installed-Size: 235520
Filename: hnetd-openssl_2018.12.21~c4376661-r1_arm_arm926ej-s.ipk
Size: 104346
SHA256sum: be318b60ca0165ea82f7adaacb153ebd73377a80d0700fe52c180eccbdfcccfb
Description:  This package provides a daemon which implementats distributed prefix assignment
 and service discovery for a home network consisting of multiple routers
 connected to multiple service providers. It provides a netifd protocol "hnet"
 for use in /etc/config/network.

Package: luci-app-cjdns
Version: 1.3-r9
Depends: libc, cjdns, luci-compat, luci-base
License: GPL-3.0-or-later
Section: luci
URL: https://github.com/cjdelisle/cjdns
Architecture: arm_arm926ej-s
Installed-Size: 40960
Filename: luci-app-cjdns_1.3-r9_arm_arm926ej-s.ipk
Size: 6591
SHA256sum: 2c3ff3e05241017dc4544d702c0a0d9b50ef52205846f3743c3bd5e0e381e3f1
Description:  Cjdns implements an encrypted IPv6 network using public-key cryptography for address allocation and a distributed hash table for routing. This provides near-zero-configuration networking, and prevents many of the security and scalability issues that plague existing networks.

Package: luci-app-hnet
Version: 2018.12.21~c4376661-r1
Depends: libc
License: GPL-2.0-only
Section: luci
Architecture: arm_arm926ej-s
Installed-Size: 235520
Filename: luci-app-hnet_2018.12.21~c4376661-r1_arm_arm926ej-s.ipk
Size: 57621
SHA256sum: daceb393252f3e7ddca75a1261d91eaeea45b34621e9d5803e504f864a2c2e9b
Description:  HNCP Homenet configuration and visualization

Package: luci-app-olsrd2
Version: 0.2.6-r16
Depends: oonf-olsrd2, luci-mod-admin-full, libc
Section: luci
Architecture: all
Installed-Size: 61440
Filename: luci-app-olsrd2_0.2.6-r16_all.ipk
Size: 7783
SHA256sum: 45396eec128b51dbf2cce4ef4e75c5ca52ad48081beccca89d280646078a875d
Description:  OLSR2 configuration and status module

Package: mesh11sd
Version: 4.1.1-r1
Depends: libc
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/mesh11sd
Architecture: all
Installed-Size: 122880
Filename: mesh11sd_4.1.1-r1_all.ipk
Size: 25669
SHA256sum: ce5ac802cf56ecb81de77106fb70632fcfffa643368293ac7286b1f2283de60e
Description:  Mesh11sd is a dynamic parameter configuration daemon for 802.11s mesh networks.
 It was originally designed to leverage 802.11s mesh networking at Captive Portal venues.
 This is the open source version and it enables easy and automated mesh network operation with multiple mesh nodes.
 It allows all mesh parameters supported by the wireless driver to be set in the uci config file.
 Settings take effect immediately without having to restart the wireless network.
 Mesh paths are stabilised when node coverage areas overlap and rssi thresholds and tx power can be dynamically adjusted.
 Default settings give rapid and reliable layer 2 mesh convergence.
 Without mesh11sd, many mesh parameters cannot be set in the uci wireless config file as the mesh interface must be up before the parameters can be set.
 Some of those that are supported, would fail to be implemented when the network is (re)started resulting in errors or dropped nodes.
 The mesh11sd daemon can dynamically check configured parameters and set them as required.
 In auto_config mode, upstream wan connectivity is checked (eg Internet feed) and when not present, layer 2 peer mode is autonomously enabled,
 and when it is present, layer 3 portal mode is enabled. This allows the same simple router configuration to be used on all meshnodes in the layer 2 mesh backhaul.
 Remote terminal sessions and remote file transfers are supported using the meshnode mac address as an identifier.
 Simple configuration of Opportunistic Wireless Encryption (OWE) and Customer[Client] Premises Equipment (CPE) mode is supported on mesh gates.
 OWE Transition Mode is enabled by default on mesh gates.
 This version does not require a Captive Portal to be running.

Package: minimalist-pcproxy
Version: 2014.12.12~2d6d1b0b-r7
Depends: libc, libubox20240329
License: BSD-3-Clause
Section: net
URL: https://github.com/fingon/minimalist-pcproxy
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: minimalist-pcproxy_2014.12.12~2d6d1b0b-r7_arm_arm926ej-s.ipk
Size: 7200
SHA256sum: f3a2f6c2f7933b2a7860f278c93adca4a10f98b034573d010aa3d4691fdc29b2
Description:  This package contains a daemon which can be used to forward
 PCP (Port Control Protocol - RFC6887) requests requests to PCP remote servers.
 
 In and of itself, it is not very useful, but combined with hnetd+miniupnpd
 it allows for control of NAT forwarding and firewall pinholes from multiple
 hops away.

Package: naywatch
Version: 1-r7
Depends: libc, owipcalc
License: GPL-2.0-only
Section: utils
Architecture: all
Installed-Size: 20480
Filename: naywatch_1-r7_all.ipk
Size: 2852
SHA256sum: 3aa1a6b591ce1d7e6d68ae27918c99930a85b70044e59c333cd610f4ce5edc2e
Description:  Reboots or triggers watchdog if no link-local neighbor is available.
 
 Important:
 Be careful when you do a sysupgrade. Stop naywatch first, and make
 sure procd took control again of the watchdog.
 You can do this using 'ubus call system watchdog'.  Status should be "running".

Package: ndppd
Version: 0.2.5-r2
Depends: libc, libstdcpp6
License: GPL-3.0-or-later
Section: net
URL: http://www.priv.nu/projects/ndppd/
Architecture: arm_arm926ej-s
Installed-Size: 81920
Filename: ndppd_0.2.5-r2_arm_arm926ej-s.ipk
Size: 32642
SHA256sum: 8e4c02e575dd3a61957272a257998bd9a875428becc229fb38aa686f08af2ea6
Description:  ndppd, or NDP Proxy Daemon, is a daemon that proxies NDP (Neighbor Discovery
 Protocol) messages between interfaces.  ndppd currently only supports Neighbor
 Solicitation Messages and Neighbor Advertisement Messages.
 
 The ndp_proxy provided by Linux doesn't support listing proxies, and only hosts
 are supported.  No subnets.  ndppd solves this by listening for Neighbor
 Solicitation messages on an interface, then query the internal interfaces for
 that target IP before finally sending a Neighbor Advertisement message.

Package: nodogsplash
Version: 5.0.2-r1
Depends: libc, libpthread, libmicrohttpd-no-ssl, iptables-nft, iptables-mod-nat-extra, iptables-mod-ipopt, iptables-mod-conntrack-extra
License: GPL-2.0-or-later
Section: net
URL: https://github.com/nodogsplash/nodogsplash
Architecture: arm_arm926ej-s
Installed-Size: 122880
Filename: nodogsplash_5.0.2-r1_arm_arm926ej-s.ipk
Size: 47511
SHA256sum: 10d555cab3c889ac64fa219d18693e0a1f05289ebc505a4e415467f2456a3115
Description:  Nodogsplash is a Captive Portal that offers a simple way to
 provide restricted access to the Internet by showing a splash
 page to the user before Internet access is granted.

Package: ohybridproxy
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329, mdnsd
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_arm926ej-s
Installed-Size: 30720
Filename: ohybridproxy_2020.05.22~0dfef1eb-r3_arm_arm926ej-s.ipk
Size: 11127
SHA256sum: eb6a51943528992f24ec7dc43c0f71152a4f79ff326593edb01466e4f3d361f9
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.

Package: olsrd-mod-arprefresh
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 10240
Filename: olsrd-mod-arprefresh_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 2730
SHA256sum: 00e67473806cb32888e7237d6c6b92af37020bc1dd3baf3bc0c3fbb175852602
Description:  Kernel ARP cache refresh plugin

Package: olsrd-mod-bmf
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, kmod-tun
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 30720
Filename: olsrd-mod-bmf_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 12894
SHA256sum: a33285c15940476fdea74edb05a2934e865f23c0eee677b5b5bb0092b56ca5b9
Description:  Basic multicast forwarding plugin

Package: olsrd-mod-dot-draw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: olsrd-mod-dot-draw_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 4559
SHA256sum: ea88a415c945cebc5dd34d292ea6902676b9713320085a325cb065add77fefa0
Description:  Dot topology information plugin

Package: olsrd-mod-dyn-gw-plain
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw-plain_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 3067
SHA256sum: 5b64fcc41ee906a78eaadea4271dd8eb37ad7bb465d95a5d91898560a9c64edb
Description:  Dynamic internet gateway plain plugin

Package: olsrd-mod-dyn-gw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: olsrd-mod-dyn-gw_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 4746
SHA256sum: 1858c2fb237ac69df384769027967174a1d1c2dcf192b1743fdc436f28c0a5f2
Description:  Dynamic internet gateway plugin

Package: olsrd-mod-filtergw
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: olsrd-mod-filtergw_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 3280
SHA256sum: 8d3ee14752ace359cb866d3f377abfad95883c24392d7ae7a73e7ca24bb2b84e
Description:  Filter Gateway plugin

Package: olsrd-mod-httpinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 81920
Filename: olsrd-mod-httpinfo_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 33374
SHA256sum: 4c2f7602805b6c42dc112576146b8260c1350726c1dff52d996c6a1dcb69bd3a
Description:  Small informative web server plugin

Package: olsrd-mod-jsoninfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 61440
Filename: olsrd-mod-jsoninfo_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 25322
SHA256sum: 85cd4629c86b2ab86c238ec26dc9eeab44b710854e8fa137bcf1d6a235de5ad0
Description:  Small informative plugin with JSON output

Package: olsrd-mod-mdns
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 30720
Filename: olsrd-mod-mdns_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 9781
SHA256sum: 1fd4ebf20d85df4809ab83b60bcf5df9f82d8700edda384a812a3a3a3c5deb4c
Description:  MDNS/Zeroconf/Bonjour packet distribution

Package: olsrd-mod-nameservice
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 30720
Filename: olsrd-mod-nameservice_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 11711
SHA256sum: d205a1f6cb641ce02a9179e748f761e4f704126f98d8a80d78663f8bcef48bb8
Description:  Lightweight hostname resolver plugin

Package: olsrd-mod-netjson
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 40960
Filename: olsrd-mod-netjson_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 14455
SHA256sum: 38d4c6fd482e9981252c9aca080f4f47057fd185cf84532bca312ea5fce1daf5
Description:  netjson plugin with JSON output

Package: olsrd-mod-p2pd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: olsrd-mod-p2pd_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 9044
SHA256sum: e4eb756d58a1a94bd2eee74793ca98c429e03dd4dca268d61e6a110f715b8ba0
Description:  Peer to Peer Discovery plugin

Package: olsrd-mod-pgraph
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: olsrd-mod-pgraph_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 3651
SHA256sum: e5a03016a8d6c08c4957e9da0a973326df36514d94b8e3597fc6a71f07c7d836
Description:  output network topology for pgraph

Package: olsrd-mod-pud
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd, libgps30
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 174080
Filename: olsrd-mod-pud_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 61479
SHA256sum: 631f646ae1bbf0770d03ede8c4e04df071769b349b8891cd1b4c5041fd8a9140
Description:  Position Update Distribution plugin

Package: olsrd-mod-quagga
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: olsrd-mod-quagga_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 6792
SHA256sum: abb8dadf088192056ce449b1a08ad44ee47fd1fa7694dc1961b716e57ce26daa
Description:  Quagga plugin

Package: olsrd-mod-secure
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 30720
Filename: olsrd-mod-secure_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 11051
SHA256sum: dd5197e922b1e2bc655328623a60f2de24f943459f0b5683c30d28a8fde76a18
Description:  Message signing plugin to secure routing domain

Package: olsrd-mod-sgwdynspeed
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: olsrd-mod-sgwdynspeed_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 5067
SHA256sum: a2e479e6f6a3241228818026ddce30608c70c250b30af1aed80f54260c4a08a9
Description:  Smart Gateway dynamic speed plugin

Package: olsrd-mod-txtinfo
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 40960
Filename: olsrd-mod-txtinfo_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 16377
SHA256sum: 1f5f7ea92b68fda80aea5c89a7b4b06c56f2c9146f637f180ce36cc9de5c7819
Description:  Small informative web server plugin

Package: olsrd-mod-watchdog
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 10240
Filename: olsrd-mod-watchdog_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 2353
SHA256sum: 0fc2375c21e84bc6d0403b0f0677c34d2c158648d0fe8f5f66217ef1d6aed6cd
Description:  Watchdog plugin

Package: olsrd-utils
Version: 2024.06.09~d72be9ad-r1
Depends: libc, olsrd
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 10240
Filename: olsrd-utils_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 1957
SHA256sum: 3e7ab9cff89a8a655e71d07e196223ec3ef0547e10c136e5c81c3b0ba38b96c7
Description:  Utils for OLSRD

Package: olsrd
Version: 2024.06.09~d72be9ad-r1
Depends: libc, libpthread, libubus20241020, iptables, ip6tables
License: BSD-3-Clause
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 327680
Filename: olsrd_2024.06.09~d72be9ad-r1_arm_arm926ej-s.ipk
Size: 141695
SHA256sum: 4edcc135746d8fd977d724b435ed572484156d00b677f25bb76bbe12302da4b2
Description:  OLSR (Optimized Link State Routing) daemon

Package: oonf-dlep-proxy
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 368640
Filename: oonf-dlep-proxy_2022.08.25~fb15d54d_arm_arm926ej-s.ipk
Size: 162253
SHA256sum: 3e7aeac6499d7431a619380256621dae203399ac580cd8263604040aa0b0b3ed
Description:  Build DLEP Radio+Router Agent

Package: oonf-dlep-radio
Version: 2022.08.25~fb15d54d
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 358400
Filename: oonf-dlep-radio_2022.08.25~fb15d54d_arm_arm926ej-s.ipk
Size: 158142
SHA256sum: 549f6c8390bbb06ac268961f1f81f3ced603bd526d0d280230a5a05b1df6981f
Description:  Build DLEP Radio Agent

Package: oonf-init-scripts
Version: 0.9.1-r3
Depends: libc
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 10240
Filename: oonf-init-scripts_0.9.1-r3_arm_arm926ej-s.ipk
Size: 2300
SHA256sum: 11d438be4fcb643920a2dc977c296aaed28c3785b201b4eebe703ee75f9c0e1e
Description:  Common OONF startup scripts

Package: oonf-olsrd2
Version: 2022.08.25~1cec9b21
Depends: libc, librt, libnl-tiny1, libuci20130104, oonf-init-scripts
Section: net
URL: http://www.olsr.org/
Architecture: arm_arm926ej-s
Installed-Size: 522240
Filename: oonf-olsrd2_2022.08.25~1cec9b21_arm_arm926ej-s.ipk
Size: 234810
SHA256sum: af78de4b7623f324b1039537638122364804324b1ce73581a40cc618676accc2
Description:  Build Olsrd V2 Routing Agent

Package: opennds
Version: 10.3.0-r1
Depends: libc, libmicrohttpd-no-ssl
Conflicts: nodogsplash
License: GPL-2.0-or-later
Section: net
URL: https://github.com/opennds/opennds
Architecture: arm_arm926ej-s
Installed-Size: 563200
Filename: opennds_10.3.0-r1_arm_arm926ej-s.ipk
Size: 163021
SHA256sum: 0c50bc87c7fe4ff2dd5a1480588ab09ec1e2b54a5da4ef347dc7b3a7b73b584f
Description:  openNDS (open Network Demarcation Service) is a high performance, small footprint, Captive Portal.
 It provides a border control gateway between a public local area network and the Internet.
 It supports all scenarios ranging from small stand alone venues through to large mesh networks with multiple portal entry points.
 Both the client driven Captive Portal Detection method (CPD) and gateway driven Captive Portal Identification method (CPI - RFC 8910 and RFC 8908) are supported.
 This version uses nftables.

Package: pimbd
Version: 2018.06.19~dbf4e591-r4
Depends: libc, netifd
License: Apache-2.0
Section: net
URL: https://github.com/Oryon/pimbd.git
Architecture: arm_arm926ej-s
Installed-Size: 194560
Filename: pimbd_2018.06.19~dbf4e591-r4_arm_arm926ej-s.ipk
Size: 83477
SHA256sum: 6c0d15e0664faebe33141a2e7b64bb112dcadf1d98bdbceadb9bf70463420f8c
Description:  This package provides a daemon which implements the Protocol Independent
 Multicast BIDIR routing protocol. Note that a routing protocol must be
 installed and running in order for PIM to function.

Package: prince
Version: 0.4-r3
Depends: libc, libjson-c5, libpthread
License: MIT
Section: net
URL: https://github.com/AdvancedNetworkingSystems/prince
Architecture: arm_arm926ej-s
Installed-Size: 71680
Filename: prince_0.4-r3_arm_arm926ej-s.ipk
Size: 27792
SHA256sum: 6aedd59ef1d24efe7385c7e6b3a45e4e17bb3239ee5afe82d37994a3710531d2
Description:  Prince is an open source implementation of the PopRouting Algorithm.
 It has been developed as a Google Summer of Code Project in collaboration with Freifunk and the University of Trento.
 
 Prince fetches topology data from a Link State routing daemon (OONF, OLSR, OSPF, etc),
 calculates the betweenness centrality using the topology and then computes the
 the timers' optimal values using these data. At the end of the computation the timers are pushed back to the routing daemon.
 Since v0.4 it supports both OONF and OLSRd.

Package: vis
Version: 2013.04.07~7710cce4-r9
Depends: libc, libpthread
License: GPL-2.0-only
Section: net
URL: https://www.open-mesh.org/
Architecture: arm_arm926ej-s
Installed-Size: 30720
Filename: vis_2013.04.07~7710cce4-r9_arm_arm926ej-s.ipk
Size: 11122
SHA256sum: 609cf3d0914ae6d47af39039b73db684fb47220f2445560fb79275d3c5da2c8c
Description:  visualization server for B.A.T.M.A.N. layer 3

Package: zonestitcher
Version: 2020.05.22~0dfef1eb-r3
Depends: libc, libubox20240329
License: GPL-2.0-only
Section: net
URL: https://github.com/sbyx/ohybridproxy
Architecture: arm_arm926ej-s
Installed-Size: 20480
Filename: zonestitcher_2020.05.22~0dfef1eb-r3_arm_arm926ej-s.ipk
Size: 9033
SHA256sum: ee840d0fb8f3cd52af670fd209cac79a37888f8d7b036fe46a8e5175610c6294
Description:  This package provides a statically configured daemon for translating DNS
 requests to Multicast DNS and back again.