From: Fabio Soldati (fabio.soldati@ansid.ch)
Date: Thu Jan 24 2002 - 08:56:10 CET
Hi Jesus,
sorry for the delay. here are the files:
http://sat.otium.ch/downloads/lcdproc/lcdproc.tgz
http://sat.otium.ch/downloads/lcdproc/LCDd.conf
I added support for HD44780 compatible displays only. I tested 8 bit wiring and that worked well (check out the /docs dir for more about the connection to your pc).
There is one mysterious thing:
the LCDd daemon only works in debug mode on my system. Therefore it produces a lot of unused debug messages (you can redirect it to /dev/null). I also put the release version to the tgz file. Probably you have more luck.
Instruction:
Daemon:
LCDd -c /etc/LCDd.conf > /dev/null
Client:
lcdproc C T & # Shows the CPU state and the systemtime. type lcdproc --help for more...
Best Regards Fabio
> -----Original Message-----
> From: JesusC [mailto:jesus.consuegra@eresmas.net]
> Sent: Tuesday, January 22, 2002 11:40 PM
> To: Fabio Soldati
> Subject: Re: LCDProc
>
>
> Hello Fabio,
>
> Monday, January 21, 2002, 1:19:02 PM, you wrote:
>
> FS> I tested it on muLinux with a 20x4 display on the
> parallel port and it
> FS> worked fine. If someone is interested I can put the
> binaries (libc5
> FS> compatible) to an ftp server.
>
> YES PLEASE!!!!
> Jesus,
>
>
> --
> Best regards,
> JesusC mailto:jesus.consuegra@eresmas.net
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.dk
> For additional commands, e-mail: mulinux-help@sunsite.dk
>
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:21 CET