##-----------------------------------------------------------------------------
## config.txt -    OPT_BESTPOWER					1.01
##        P L E A S E   R E A D   T H E   D O C U M E N T A T I O N
##
##        B I T T E  U N B E D I N G T   D I E   D O K U M E N T A T I O N
##                                  L E S E N 
##
## Creation:     16.04.2003  Marcus Herleb <herleb@herleb.de>
## Last Update:  19.05.2003  Marcus Herleb <herleb@herleb.de>
##
##-----------------------------------------------------------------------------
## Es gelten die Lizenzbestimmungen der Fa. BESTPOWER, siehe
## /doc/deutsch/opt/bestpower.txt und Basic.txt
#------------------------------------------------------------------------------
# Optional package: USV BESTPOWER - shutdown router if power failed
#------------------------------------------------------------------------------

OPT_BESTPOWER='no'
      
BESTPOWER_ALLOW_TIME='65'      # Allow time: At startup, the checkups
			       # program waits # seconds before becoming activated.
       			       # Range = 5 to 600 seconds. Default = 65 seconds.

BESTPOWER_COUNTDOWN_TIME='5'   # if Power failed initiate shutdown in X minutes.
			       # Range = 1 to 99 minutes. Default = 5 minutes.
			       # !! hinzu kommt eine Minute bis zum Shutdown !!
BESTPOWER_EVENT_1=''	       # kein EVENT definiert (zur Definition siehe DOKU !)
BESTPOWER_EVENT_2=''           #       "
BESTPOWER_EVENT_3=''           #       "  
BESTPOWER_EVENT_4=''           #       " 

BESTPOWER_BACK_EVENT_1=''
BESTPOWER_BACK_EVENT_2=''      #       " 
BESTPOWER_BACK_EVENT_3=''      #       " 
BESTPOWER_BACK_EVENT_4=''      #       " 

BESTPOWER_EVENT_1_TIME=''      # (0,4,3,2,1, siehe DOKU !)
			        
			        
BESTPOWER_EVENT_2_TIME=''      #       "
			       
				
BESTPOWER_EVENT_3_TIME=''      #       " 
				
BESTPOWER_EVENT_4_TIME=''      #       "
			       #       "					       

BESTPOWER_SLEEP_TIME='30'      # The checkups program polls the UPS every x seconds.
			       # Range = 5 to 60 seconds. Default = 30 seconds.

BESTPOWER_LBALARM='no'	       # Low Battery Alarm: DO NOT Shutdown of Operating System
			       # upon UPS Low Battery alarm condition.
			       # Default = no (Shutdown based on Low Battery Alarm).

BESTPOWER_PORT='com1'          # BESTPOWER-USV connection Port: com1, com2, ...
                               # oder ttyS0, ttyS1 ...
                                
BESTPOWER_TTY='3'              # CHECKUPS II Status on Console 3,4 ...
			       # Note: TTY2 is reserved for recovery status
			       
BESTPOWER_LOG='yes'            # log /var/log/bestpower.log: yes or no
BESTPOWER_LOGDIR='/var/log'    # log-directory, e.g. /hda4/log