/* hp+.c: Diagnostic program for HP PC LAN+ (27247B and 27252A) ethercards.

	This is a diagnostic program for the HP PC LAN+ Ethernet adapter models
	27247B and 27252A.

	This program must be compiled with '-O'.
	If you have unresolved references to e.g. inw(), then you haven't used -O.
	The suggested compile command is at the bottom of this file.

	Copyright 1994-2000 by Donald Becker.
	This software may be used and distributed according to the terms of
	the GNU General Public License (GPL), incorporated herein by reference.
	Contact the author for use under other terms.

	The author may be reached as becker@scyld.com, or C/O
	 Scyld Computing Corporation
	 914 Bay Ridge Road, Suite 220
	 Annapolis MD 21403

	Support and updates are available at
	http://www.scyld.com/diag/index.html

	Common-sense licensing statement: Using any portion of this program in
	your own program means that you must give credit to the original author
	and release the resulting code under the GPL.  You must include the
	text of the license with any redistribution.  See
	 http://www.gnu.org/copyleft/gpl.txt
*/

static const char cvs_id[] =
"$Id: hp+.c,v 1.3 2005/03/22 04:36:48 becker Exp $";

static const char version_msg[] =
"hp+.c:v1.03 3/21/2005 Donald Becker http://www.scyld.com/diag/index.html\n";

static const char usage_msg[] =
"Usage: hp+ [-afhNsvVwW] [-p <IOport>] [-F <xcvr-type>] [-P <newIOport>]\n\
   -p <I/O base address>  Use the card at this I/O address (default 0x300).\n\
  EEPROM configuration commands take effect at the next reset\n\
   -F 10baseT, 10base2, AUI, 10baset   Set the specified transceiver type.\n\
   -Q 3, 4, 5, 9, 10, 11, 12, 15       Set the IRQ line.\n\
   -P 0x240, 0x280, 0x2C0, 0x300, 0x320, 0x340, 0x360  New I/O base.\n\
";

#if ! defined(__OPTIMIZE__)
#warning  You must compile this program with the correct options!
#error You must compile this driver with "-O".
#endif
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <getopt.h>
#include <string.h>
#include <errno.h>
#include <fcntl.h>
#include <sys/mman.h>

#if defined(__linux__)  &&  __GNU_LIBRARY__ == 1
#include <asm/io.h>
#else
#include <sys/io.h>
#endif

struct option longopts[] = {
 /* { name  has_arg  *flag  val } */
	{"base-address", 1, 0, 'p'},/* The base I/O *P*ort address. */
	{"help",       0, 0, 'h'},  /* Give help */
	{"interface",  0, 0, 'f'},  /* Transceiver type number (built-in, AUI) */
	{"irq",        1, 0, 'Q'},  /* Interrupt number */
	{"ne2000",     1, 0, 'N'},  /* Switch to NE2000 mode */
	{"verbose",    0, 0, 'v'},  /* Verbose mode */
	{"version",    0, 0, 'V'},  /* Display version number */
	{"wd8013",     1, 0, 'M'},  /* Switch to shared-memory mode. */
	{"write-EEPROM", 1, 0, 'w'},/* Write the EEPROM with the specified vals */
	{ 0, 0, 0, 0 }
};

/* A few local definitions.  These mostly match the device driver
   definitions. */

#define HP_IO_EXTENT		32

#define HP_ID					0x00
#define HP_PAGING               0x02    /* See enum PageName */
#define HPP_OPTION              0x04
#define HPP_OUT_ADDR    0x08
#define HPP_IN_ADDR             0x0A
#define HP_DATAPORT             0x0c
#define NIC_OFFSET              0x10    /* Offset to the 8390 registers. */

#define HP_START_PG             0x00    /* First page of TX buffer */
#define HP_STOP_PG              0x80    /* Last page +1 of RX ring */

enum PageName { Perf_Page = 0, MAC_Page = 1, HW_Page = 2, LAN_Page = 4,
                                        ID_Page = 6 }; 

/* The values for HPP_OPTION. */
enum HP_Option {
	NICReset = 1, ChipReset = 2,    /* Active low, really UNreset. */
	EnableIRQ = 4, FakeIntr = 8, BootROMEnb = 0x10, IOEnb = 0x20,
	MemEnable = 0x40, ZeroWait = 0x80, MemDisable = 0x1000, };
/* ... and their names. */  
static char* hp_option_names[] =
{"NIC Running", "Board Running", "IRQ Enabled", "IRQ Set", "Boot ROM On",
	 "Programmed I/O Enabled", "Shared memory enabled",
	 "Zero Wait State enabled", 0, 0, 0, 0, "Memory disabled", 0, 0, 0};

static int test_shared_mem(int ioaddr, caddr_t location);
static int test_io_mem(int ioaddr);
static int do_checksum(int ioaddr);
static void block_output_io(int ioaddr, const unsigned char *buf, int count, int offset);
static void block_input_io(int ioaddr, unsigned char *buf, int count, int offset);

/*
 This is it folks...
 */

int
main(int argc, char *argv[])
{
	extern char *optarg;
	int port_base = 0x300, ioaddr, irq = -1;
	int errflag = 0, verbose = 0, mem_mode = 0, write_eeprom = 0;
	int show_version = 0;
	int xcvr = -1;				/* Transceiver type. */
	int c, i;
	unsigned int option;
	caddr_t memory_base;

	while ((c = getopt(argc, argv, "f:hQ:p:svVw")) != -1)
		switch (c) {
		case 'f':  xcvr = atoi(optarg); break;
		case 'h':  printf(usage_msg); return 0;
		case 'Q':  irq = atoi(optarg);  break;
		case 'p':  port_base = strtol(optarg, NULL, 16);  break;
		case 's':  mem_mode++; break;
		case 'v':  verbose++;			break;
		case 'V':  show_version++;		break;
		case 'w':  write_eeprom++;		break;
		case '?':
			errflag++;
		}
	if (errflag) {
		fprintf(stderr, usage_msg);
		return 3;
	}

	if (verbose || show_version)
		printf(version_msg);

	/* Turn on access to the I/O ports. */
	if (ioperm(port_base, HP_IO_EXTENT, 1)) {
		fprintf(stderr, "hp+diag: ioperm() failure: %s\n",
				strerror(errno));
		fprintf(stderr,
				" This program directly accesses hardware device registers \n\
 and thus must be run as 'root'.  This program may interfere with current\n\
 network traffic when run, and may change the hardware configuration.\n");
		return 2;
	}
	printf("Checking the ethercard signature at %#3x:", port_base);
	ioaddr = port_base;

	for (i = 0; i < 8; i+=2)
		printf(" %4.4x", inw(ioaddr + i));

    /* Check for the HP+ signature, 50 48 0x 53. */
    if (inw(ioaddr) != 0x4850
        || (inb(ioaddr+2) & 0xf0) != 0x00
        || inb(ioaddr+3) != 0x53) {
        printf("Invalid HP PCLAN+ ethercard signature at %#x.\n", ioaddr);
        return ENODEV;
    }
    printf(" found.\n");

	option = inw(ioaddr + HPP_OPTION);
	printf("Option register is %4.4x:\n", option);
	for (i = 0; i < 16; i++)
		if (option & (1 << i))
			printf("  Option '%s' set.\n", hp_option_names[i]);

	printf("8390 registers are:");
	for(i = 16; i < 22; i++)
		printf(" %2.2x", inb(ioaddr + i));
	printf("...\n");

	do_checksum(ioaddr);

	/* Point at the Software configuration registers. */
	outw(ID_Page, ioaddr + HP_PAGING);
	printf("Software configuration:"); 
	for(i = 8; i < 16; i++)
	    printf(" %2.2x", inb(ioaddr + i));
	printf(" Model ID %4.4x.\n", inw(ioaddr + 12));

	/* Point at the Hardware configuration registers. */
	outw(HW_Page, ioaddr + HP_PAGING);
	printf("Hardware configuration:"); 
	for(i = 8; i < 16; i++)
	    printf(" %2.2x", inb(ioaddr + i));
	outb(0x0d, ioaddr + 10);
	memory_base = (caddr_t)(inw(ioaddr + 9) << 8);
	printf("\n  IRQ %d, memory address %#x, Internal Rx pages %2.2x-%2.2x.\n",
	       inb(ioaddr + 13) & 0x0f, inw(ioaddr + 9) << 8, inb(ioaddr + 14),
	       inb(ioaddr + 15));

	/* Point at the "performance" registers. */
	printf("Normal operation page :"); 
	outw(Perf_Page, ioaddr + HP_PAGING);
	for(i = 8; i < 16; i++)
	    printf(" %2.2x", inb(ioaddr + i));
	printf(".\n");

	outw(LAN_Page, ioaddr + HP_PAGING);
	printf("LAN page              :"); 
	for(i = 8; i < 16; i++)
	    printf(" %2.2x", inb(ioaddr + i));
	printf(".\n");
	outw(ID_Page, ioaddr + HP_PAGING);
	printf("ID page               :"); 
	for(i = 8; i < 16; i++)
		printf(" %2.2x", inb(ioaddr + i));
	printf(".\n");

	outw(Perf_Page, ioaddr + HP_PAGING);

	test_io_mem(ioaddr);

	if (option & MemEnable)
		test_shared_mem(ioaddr, memory_base);
	else {
		/* Ignore the EEPROM configuration, just for testing. */
		outw(option | MemEnable, ioaddr + HPP_OPTION);
		test_shared_mem(ioaddr, memory_base);
		outw(option, ioaddr + HPP_OPTION);
	}

	return 0;
}

static caddr_t shared_mem = 0;

static int map_shared_mem(caddr_t location, int extent)
{
	int memfd;

	memfd = open("/dev/kmem", O_RDWR);
	if (memfd < 0) {
		perror("/dev/kmem (shared memory)");
		return 2;
	}
	shared_mem = mmap(location, extent, PROT_READ|PROT_WRITE, MAP_SHARED,
					  memfd, (off_t)location);
	printf("Shared memory at %#x mapped to %#x.\n",
		   (int)location, (int)shared_mem);
	return 0;
}

static int test_shared_mem(int ioaddr, caddr_t location)
{
	int option_reg = inw(ioaddr + HPP_OPTION);

	block_output_io(ioaddr, "Zero page info ZZZeerooo", 20, 0);

	map_shared_mem(location, 0x8000);
	
	outw(Perf_Page, ioaddr + HP_PAGING);
	outw(0x0000, ioaddr + HPP_IN_ADDR);

	outw(option_reg & ~(MemDisable + BootROMEnb), ioaddr + HPP_OPTION);

	printf("The option register is %4.4x, shared memory value is %8.8x"
		   " %8.8x (%10.30s).\n",
		   inw(ioaddr + HPP_OPTION), ((int*)shared_mem)[0],
		   ((int*)shared_mem)[0], (char*)shared_mem);

	outw(0x0000, ioaddr + HPP_OUT_ADDR);
	((int*)shared_mem)[0] = 0xC01dBeef , 
	outw(0x0000, ioaddr + HPP_IN_ADDR);
	printf("The shared memory value is %8.8x.\n", ((int*)shared_mem)[0]);

	outw(option_reg, ioaddr + HPP_OPTION);

	return 0;
}

static int test_io_mem(int ioaddr)
{
	int i;

	{
		unsigned char buff[40];
		block_output_io(ioaddr, "Rx buffer wrap is faulty!", 20, 0x7ff6);
		block_output_io(ioaddr, "Zero page write worked.", 24, 0);
		block_output_io(ioaddr, "wrap is working.", 20, 0x0c00);
		block_input_io(ioaddr, buff, 24, 0);
		printf("Buffer input at 0 is '%20.30s'.\n", buff);
		block_input_io(ioaddr, buff, 30, 0x7ff6);
		printf("Buffer input at 0x7ff6 is '%15.30s'.\n", buff);
		block_input_io(ioaddr, buff, 20, 12*256);
		printf("Rx Buffer values are");
		for (i = 0; i < 20; i++)
			printf(" %2.2x", buff[i]);
		printf("\n");
	}

	printf("Tx region 0 is:");
	outw(0x0000, ioaddr + HPP_IN_ADDR);
	for(i = 0; i < 10; i++)
		printf(" %2.2x", inw(ioaddr + HP_DATAPORT));
	printf("...\n");
	printf("Tx region 1 is:");
	outw(0x0600, ioaddr + HPP_IN_ADDR);
	for(i = 0; i < 10; i++)
		printf(" %2.2x", inw(ioaddr + HP_DATAPORT));
	printf("...\n");
	printf("Rx region is:");
	outw(0xc00, ioaddr + HPP_IN_ADDR);
	for(i = 0; i < 20; i++)
	    printf(" %2.2x", inb(ioaddr + HP_DATAPORT));
	printf(".\n        ");
	outw(0xc00, ioaddr + HPP_IN_ADDR);
	for(i = 0; i < 10; i++)
	    printf(" %4.4x", inw(ioaddr + HP_DATAPORT));
	printf(".\n        ");
	outw(0xc00, ioaddr + HPP_IN_ADDR);
	for(i = 0; i < 5; i++)
	    printf(" %8.8x", inl(ioaddr + HP_DATAPORT));
	printf(".\n");

	return 0;
}

static int do_checksum(int ioaddr)
{
	unsigned char checksum = 0;
	int i;

	/* Retrieve and checksum the station address. */
	outw(MAC_Page, ioaddr + HP_PAGING);

	printf("Ethernet address      :");
	for(i = 0; i < 8; i++) {
	    unsigned char inval = inb(ioaddr + 8 + i);
	    if (i < 7)
	        checksum += inval;
	    printf(" %2.2x", inval);
	}

	if (checksum != 0xff) {
	    printf(" bad checksum %2.2x.\n", checksum);
	    return ENODEV;
	}
	printf(" good checksum.\n");

	return 0;
}

static void
block_output_io(int ioaddr, const unsigned char *buf, int count, int offset)
{
	    outw(offset, ioaddr + HPP_OUT_ADDR);
	    outsl(ioaddr + HP_DATAPORT, buf, (count+3)>>2);
	    return;
}
static void
block_input_io(int ioaddr, unsigned char *buf, int count, int offset)
{
	outw(offset, ioaddr + HPP_IN_ADDR);
	insw(ioaddr + HP_DATAPORT, buf, count>>1);
	if (count & 0x01)
		buf[count-1] = inb(ioaddr + HP_DATAPORT);
	return;
}

/*
 * Local variables:
 *  compile-command: "gcc -Wall -O6 -o hp+ hp+.c"
 *  c-indent-level: 4
 *  c-basic-offset: 4
 *  tab-width: 4
 * End:
 */